Embed Size (px)
Citation preview
The WEDA range (60 Hz)
Complete submersible dewatering solutions
HIGH WEARRESISTANCE
LIGHTER40%
IN WEIGHT
40
UP TO
UPTO2 inch
SOLIDSH A N D L I N G
WATER DENSITY
87.40 lb/ft3UPTO
WEDA submersible pumpsWEDA electric submersible pumps and accessories are designed for an extensive range of dewatering applications, across multiple industries. They provide the performance, reliability and ease of use you need. WEDA pumps feature a built-in starter and motor protection system along with optional automatic level control. Adjustable wear-resistant rubber diffusors and hardened high-chrome impellers ensure durability in tough environments.
At Atlas Copco, we understand pumps, their applications and, most importantly, the people using them. We have a complete range of high-quality and lightweight electric submersible pumps designed specifically for drainage, sludge and slurry pumping applications and available in global voltages.
WEDA pumps are made for durability. The unique sealing system and modular design make them among the most flexible pumps on the market. Easy to use and maintain, WEDA pumps promise optimal performance. The WEDA seal system is designed to provide the optimum maintenance solution and can be easily fitted at the job site.
2 www.atlascopco.com/weda
We understand the dewatering needs of our customers, which vary with location and application. Accordingly our submersible range is developed for drainage (D), sludge (S) and slurry (L) applications.
These applications call for pumps designed specifically for handling corrosive and abrasive media and their solid contents.
• General dewatering• Ground water• Raw water• Construction sites
• Water containing mud• Sludge or light slurry• Tank clean-out• Trench and pond cleaning• Mining
• Abrasive media with high solids content
• Quarries• Dredging• Settling ponds
There is a WEDA pump for any dewatering application
Applications
Drainage pumps (WEDA D) Sludge pumps (WEDA S) Slurry pumps (WEDA L)
68 lb/ft3WATER DENSITY
UPTO 87 lb/ft3
WATER DENSITY
UPTO 106 lb/ft3
WATER DENSITY
UPTO
DESIGNTOP DISCHARGE
DESIGNBOTTOM SIDE DISCHARGE
DESIGNBOTTOM SIDE AND TOP DISCHARGE
SOLIDS HANDLING
UP TO 0.5inch
SOLIDS HANDLING
UP TO 2 inch
SOLIDS HANDLING
UP TO 2.5inch
pH VALUES FROM5 TO8
pH VALUES FROM5 TO8
pH VALUES FROM2 TO10
3www.atlascopco.com/weda
WEDA D rangeThe WEDA drainage pumps handle either clean or dirty water, even with small solids with the best performance and efficiency.
FLEXIBILITY Discharges can be mounted vertically or sideways as required
MOTOR PROTECTION Class F motors, with thermal switches in each winding
EXTENDED PERFORMANCE Pump design ensures all-round motor cooling for better performance
HIGH CORROSION RESISTANCE Unique aluminum alloy offers the perfect combination of strength, light weight and corrosion resistance
IMPROVED CABLE SEALING Ensures protection against water leakage from cable entry
MODULAR SEALING SOLUTION Based on pump size, the sealing system is adapted to provide the best solution
IMPROVED WEAR RESISTANCE High-chrome (55HRC) impellers provide higher wear resistance
WEDA+ 1. Rotation control2. Phase failure
protection3. Thermal switches4. Phase shifter plugs
for three-phase pumps
55HRC
4 www.atlascopco.com/weda
WEDA S rangeThe WEDA sludge pumps can handle thick, soft, wet mud or other similarly viscous mixtures of liquids and solids, especially the product of an industrial or refining process.
DRY RUNNING CAPABILITIES Improved rib design offers external cooling to motor for extended running time
MOTOR PROTECTION Class F motors, with thermal switches in each winding
ROBUST DESIGN Base of the pump ensures stability while enabling passage of large solids
HIGHER SOLIDS HANDLING Sludge pumps can handle solids up to 2 inch
IMPROVED CABLE SEALING Ensures protection against water leakage from cable entry
MODULAR SEALING SOLUTION Based on pump size, the sealing system is adapted to provide the best solution
SUSTAINABLE PERFORMANCE High-chrome (55HRC) impellers provide higher wear resistance
EASY INSPECTION External oil inspection plug for quick inspection of oil
WEDA+ 1. Rotation control2. Phase failure
protection3. Thermal switches4. Phase shifter plugs
for three-phase pumps
SOLIDS HANDLING
UP TO2inch
55HRC
5www.atlascopco.com/weda
ROBUST DESIGN
Heavy duty bearings to withstand shocks and overloads
HIGH ABRASION RESISTANCE Thanks to the high-chrome wear parts
HIGHER SOLIDS HANDLING Slurry pumps can handle solids up to 2.5 in
EASY ACCESS Efficient motor cooling with top discharge and side flow
EFFICIENT MOTOR Electric motor insulation class H with PTC and Clicson thermal protection and service factor S1
SUSTAINABLE PERFORMANCEHigh efficiency high chrome agitator to lift settled solids
REINFORCED SEALINGA double silicon carbide mechanical seal for duty application
WEDA L rangeThe WEDA slurry pumps are the toughest, and have the largest apertures to facilitate handling of slurry with the most challenging solids.
SOLIDS HANDLING
UP TO2.5in
6 www.atlascopco.com/weda
The unique aluminum alloy construction of the WEDA pumps provides high corrosion resistance in a wide range of applications.
Tough environments demand tough pumps
Typical applications• General dewatering• Ground water
• Raw water• Construction sites
WEDA D04N
WEDA D04BN
WEDA D08N
WEDAD10N
WEDAD30L
WEDAD30N
WEDA D40N
Specifications 1ph 1ph 1ph 1ph 3ph 1ph 3ph 1ph 3ph 3ph
Max. head ft 39.4 39.4 53.3 52 52 58 58 90 83 72
Max. flow US gpm 67.6 59.4 79.3 117 119 370 370 200 190 450
m3/h 15.0 13.5 19.5 28 29 75 75 51 51 79
Rated output hp 0.5 0.5 1.0 1.5 1.3 3.0 3.0 2.7 2.5 4.3
Max. power input kW 0.65 0.65 1.2 1.5 1.2 3.1 2.9 3.0 2.6 4
Discharge connection in 2" 1" (2"
optional) 2" 2” 2” 3” (4”) 3” (4”) 3” (4”) 3” (4”) 3” (4”)
Max solid handling size in 0.3" 0.18" 0.3" 0.16" 0.16" 0.27" 0.27" 0.27" 0.27" 0.27"
Weight and dimensions
Weight lbs 20.0 21.0 27.4 27.5 27.5 44 44 44 44 55.0
Height in 13.4 16.4 14.1 15.5 15.5 20.6 20.6 19.4 19.4 20.6
Width in 8.3 10.0 8.3 8.8 8.8 11.4 11.4 11.4 11.4 11.4
Diameter in 7.2 8.7 7.3 7.3 7.3 8.7 8.7 8.7 8.7 8.7
WEDA D range Technical data
Height
Diameter
Width
8 www.atlascopco.com/weda
According to ISO 9906 – ANNEX A
Normal headLow head
Performance curvesWEDA D04BN
0
2
4
6
8
10
12
14
16
0 50 100 150 200 250 300 350 400
WEDA D04Boutlet Ø 25 mm
WEDA D04Boutlet Ø 50 mm
(m)
(US gpm)
(l/min)
0 13 26 39 52 66 79 92 105
0
6
52
45
39
32
26
19
13
(ft)
WEDA D04N
00
26
52
45
39
32
26
19
13 4
6
8
10
12
14
16
0 50 100 150 200 250 300 350 400
(US gpm)
(l/min)
(m) (ft)
0 13 26 39 52 66 79 92 105
Hea
dH
ead
Hea
d
Hea
dH
ead
Hea
d
Flow
Flow
Flow
Flow
Flow
Flow
WEDA D10N
0
2
4
6
8
10
12
14
16
0
0
50
13
100
26
150
39
200
52
250
66
300
79
350 400 450
92
500
105 118 132
(m)
(US gpm)
(l/min)0
6
52
45
39
32
26
19
13
(ft)
Three phase
Single phase
WEDA D30L, D30N
0
5
10
15
20
25
30
0
0 52 105
200
158
400 600
211
800 1000 1200
264
1400
317 370
(m)
(US gpm)
(l/min)
Three phase
Three phase
Single phase
Single phase
0
16
98
82
65
49
32
(ft)
WEDA D40N
0
5
10
15
20
25
0
0 52 105
200
158
400 600 800
211
1000 1200 1400
264
1600
317 370 422
1800
475
(m)
(US gpm)
(l/min)
(ft)
0
16
82
65
49
32
WEDA D08N
0
2
4
6
8
10
12
14
16
0 50 100 150 200 250 300 350 400
(m)
(US gpm)
(l/min)
0 13 26 39 52 66 79 92 105
0
6
52
45
39
32
26
19
13
(ft)
9www.atlascopco.com/weda
Typical applications
WEDA D range Technical data
WEDA D50N
WEDA D50H
WEDA D60N
WEDA D60H
WEDA D60SH
WEDA D70L
WEDA D70H
WEDA D80N
WEDA D80H
WEDA D90L
WEDA D90H
WEDA D100N
Specifications 3ph 3ph 3ph 3ph 3ph 3ph 3ph 3ph 3ph 3ph 3ph 3ph
Max. head ft 83 135 100 170 250 110 254 145 240 120 325 115
Max. flow US gpm 620 310 700 340 260 1200 300 1600 760 1700 560 6100
m3/h 138 72 156 90 63 285 95 350 170 407 127 972
Rated output hp 8.5 8.5 11.5 11.5 11.5 15.0 15.0 31 31 36 36 84
Max. power input kW 7.5 7.5 10.0 10.0 10.0 13.4 16.2 26 26 28.6 31.0 80.0
Discharge connection in 4” (3”) 3” (4”) 4” (3”) 3” (4”) 3” (4”) 6” (4”) 4” (6”) 6” (4”) 4” (6”) 6” (4”) 4” (6”) 10”
Max solid handling size in 0.32" 0.32" 0.32" 0.32" 0.32" 0.27" 0.27" 0.47" 0.47" 0.27" 0.27" 0.47"
Weight and dimensions
Weight lbs 122 122 134 134 138 209 209 400 400 400 400 1124
Height in 28.3 28.3 29.9 29.9 29.9 15.5 15.5 38.6 38.6 43.4 43.4 55.5
Width in 13.0 11.9 13,0 11.9 11.9 35.8 35.8 27.2 26.2 18.9 18.9 25.5
Diameter in 10.9 10.9 10.9 10.9 10.9 14.1 14.1 20.9 20.9 15.8 15.8 23.6
• General dewatering• Ground water
• Raw water• Construction sites
Height
Diameter
Width
10 www.atlascopco.com/weda
According to ISO 9906 – ANNEX A
Super high headHigh headNormal headLow head
0
15
30
45
60
90
0
0 264
1000 2000 3000
528
4000
792
5000
1056 1321
(m)
(US gpm)
(l/min)
75
(ft)
0
49
196
246
295
147
98
0
10
20
30
40
60
70
80
0
0 264
1000 2000 3000
1585 1849
4000 5000 6000 7000
1056 1321
(m)
528 1056 (US gpm)
(l/min)
50
(ft)
0
65
32
164
196
229
262
131
98
WEDA D70L, D70H WEDA D80N, D80H
WEDA D90L, D90H
0
15
30
45
60
105
0
0 264
1000 2000 3000
528
4000
792
5000 6000 7000
1056 1321
(m)
1585 1849 (US gpm)
(l/min)
75
90
(ft)
0
49
196
246
295
344
147
98
WEDA D100N
0
5
10
15
20
40
0
0 1321
5000 10000 15000
2642
20000
3963
25000
5284 6604
(m)
(US gpm)
(l/min)
25
30
35
(ft)
0
16
82
98
114
131
65
49
32
WEDA D60N, D60H, D60SH
0
15
30
45
60
75
0
0 105 211
400 800 1200
317
1800 2200 2600
475
3000
581 687 792
(m)
(US gpm)
(l/min)
(ft)
0
49
196
246
147
98
WEDA D50N, D50H
0
10
20
30
40
50
0
0 105 211
400 800 1200
317
1800 2200 2600
475
3000
581 687 792
(m) (ft)
(US gpm)
(l/min)0
32
131
164
98
65Hea
dH
ead
Hea
d
Hea
dH
ead
Hea
d
Flow
Flow
Flow
Flow
Flow
Flow
Performance curves
11www.atlascopco.com/weda
WEDA S range Technical data
Typical applications• Water containing mud• Sludge or light slurry• Tank clean-out
• Trench and pond cleaning• Mining
Height
Diameter
Width
WEDA S04N
WEDA S08N
WEDA S30N
WEDA S50N
WEDA S60N
Specifications 1ph 1ph 1ph 3ph 3ph 3ph
Max. head ft 32.8 48.6 51 61 92 100
Max. flow US gpm 58.1 76.6 190 230 370 420
m3/h 16.2 19.0 43 52 84 95
Rated output hp 0.5 1.0 3.0 4.0 6.2 9.2
Max. power input kW - - 2.8 3.6 7.0 8.0
Discharge connection in 2" 2" 3" 3" 4" (3") 4” (3”)
Max solids handling size in 1” 1” 2" 2" 2" 2"
Weight and dimensions
Weight lbs 22.1 28.7 55 55 130 143
Height in 14.7 16.38 24.3 24.3 32 34.2
Width in 10.9 10.9 12.8 12.8 18 17.7
Diameter in 9.5 9.5 9.8 9.8 14 13.8
12 www.atlascopco.com/weda
WEDA S08NWEDA S04N
WEDA S50N
WEDA S60N
WEDA S30N
0
2
4
6
8
10
12
14
16
0 50 100 150 200 250 300 350 400
(US gpm)
(l/min)
(m)
0 13 26 39 52 66 79 92 105
0
6
52
45
39
32
26
19
13
(ft)
0
0 26 52
200 300100
79
400 500 600
105
700 800 900
158
1000
211 237 264
(m)
132 184 (US gpm)
(l/min)
(ft)
0
2
4
6
8
10
12
14
16
20
18
0
6
52
59
65
45
39
32
26
19
13
Single phase
Three phase
0
2
4
6
8
10
12
14
16
0 50 100 150 200 250 300 350 400
(US gpm)
(l/min)
(m)
0 13 26 39 52 66 79 92 105
0
6
52
45
39
32
26
19
13
(ft)
0
5
10
15
20
25
35
30
0
0 52 105
200
158
400 600 800
211
1000 1200 1400
264
1600 1800
317 370 475
(m)
422 (US gpm)
0
16
114
98
82
65
49
32
(ft)
(l/min)
0
5
10
15
20
25
35
30
0
0 52 105
200
158
400 600 800
211
1000 1200 1400
264
1600 1800
317 370 475
(m)
422 (US gpm)
(l/min)0
16
114
98
82
65
49
32
(ft)
Hea
dH
ead
Hea
dH
ead
Hea
d
Flow
Flow
Flow
Flow
Flow
Performance curves
According to ISO 9906 – ANNEX A Normal head
13www.atlascopco.com/weda
WEDA L40N
WEDA L50N
WEDA L60N
WEDA L70N
WEDA L80N
WEDAL95N
WEDAL100N
WEDA L110N
Specifications 3ph 3ph 3ph 3ph 3ph 3ph 3ph 3ph
Max. head ft 47 57 75 85 98 171 108 174
Max. flow US gpm 63 77 101 114 132 229 145 233
m3/hr 14 18 23 26 30 52 33 53
Rated outut hp 5 7 12 15 20 50 60 101
Max. power input kW 6 9 14 17 22 54 65 107
Discharge connection in 3" NPT 4" NPT 4" NPT 4" NPT ASME 4" 150lb ASME 6" 150lb ASME 6" 150lb ASME 6" 150lb
Max solid handling in 0.8 1.0 1.0 1.0 1.0 1.4 2.4 2.4
Weight and dimensionsWeight lbs 408 573 573 595 683 1653 2215 2358
Height in 31 36 36 36 42 63 63 63
Width in 15 17 17 17 23 37 37 37
Diameter in 13 16 16 16 19 21 21 21
WEDA L range Technical data
Typical applications• Abrasive media with
high solids content• Quarries
• Dredging• Settling ponds
Height Height
DiameterDiameter
Width
Width
14 www.atlascopco.com/weda
Hea
d
WEDA L40N
16
13
10
6
3
0
52
42
31
21
10
0
(m) (ft)
(m³/h)
(USGPM)
0 11 22 34 45 56
0 50 100 150 200 250
WEDA L50N
20
16
12
8
4
0
66
53
40
26
13
0
(m) (ft)
(m³/h)
(USGPM)
0 14 28 42 56 70
0 62 124 186 248 310
Hea
d
Hea
d
Flow Flow
WEDA L70N
20
16
12
8
4
0
66
53
40
26
13
0
(m) (ft)
(m³/h)
(USGPM)
0 14 28 42 56 70
0 62 124 186 248 310
WEDA L60N
20
16
12
8
4
0
66
53
40
26
13
0
(m) (ft)
(m³/h)
(USGPM)
0 14 28 42 56 70
0 62 124 186 248 310
Hea
d
Hea
d
Flow Flow
35
32
28
25
21
18
14
11
7
4
0
110
99
88
77
66
55
44
33
22
11
0
(m) (ft)
(m³/h)
(USGPM)
0 15 30 45 60 75 90 105 120 135 150
0 66 132 198 264 330 396 462 528 594 660
WEDA L80N WEDA L95N
55
44
33
22
11
0
(m) (ft)
(m³/h)0 56 112 168 224 280
0 247 493 740 986 1233 (USGPM)
180
144
108
72
36
0
Hea
d
Hea
d
Flow Flow
WEDA L100N
35
28
21
14
7
0
110
88
661
44
22
0
(m) (ft)
(m³/h)0 60 120 180 240 300
0 260 520 780 1040 1300 (USGPM)
WEDA L110N
55
44
33
22
11
0
180
144
108
72
36
0
(m) (ft)
(m³/h)0 96 192 288 384 480 0 420 840 1260 1680 2100 (USGPM)
Hea
d
Flow Flow
Performance curves
According to ISO 9906 – ANNEX A Normal head
15www.atlascopco.com/weda
Accessories
Service kitsSeal kitThe seal kit is the proper selection of high quality components for a mechanical seal change to ensure trouble-free operation after servicing.
Wear part kitThe wear part kit is a typical selection of components to bring the pump performance back to factory standard. The ideal solution for a machine overhaul or refurbishment.
Discharge connections We understand that you will have preferred equipment connections, so we offer four types. All can be mounted in either a vertical or horizontal position.
• Hose • Storz • ISO-G • NPT
• O-ring kit• Mechanical shaft seal
• Impeller • Wear plate• Diffuser• Impeller nut
Instant service packThe instant service pack is a preassembled, tested and ready-to-use seal system containing the mechanical shaft seals, bearings, gaskets and oil to ensure trouble-free operation. It offers a quick onsite repair option due to ease of installation and therefore reduces the machine downtime cost.
Zinc anodes Specifically required for pumping water with a high concentration of salts such as sea water, brine, etc.
Epoxy coating For protecting pumps in highly acidic media.
Low suction collarTo easily drain the water level down to the floor.
Level regulatorsFor easy control of water level by automatic pump switch-on/-off:
• Float switch
RaftFor easy floatation of pump with fluctuating water levels. Strainer option available
Slim Adapter For lowering pumps in narrow pipes and manholes D50H, D60H, D70H, D90H only
16 www.atlascopco.com/weda
Built better. Built to resist and perform
Flow
DIP pneumatic pumpA pneumatic pump is a great choice when failure is not an option. They’re easy to use, safe and can handle almost anything you throw at them.
The DIP centrifugal pumps can be made to suit several operations. With a simple change of impeller and intake ring you can adjust to the desired capacity and head. That means you get a three-in-one solution. The DIP is designed to handle relatively clean low-viscosity liquids such as water and cooling fluids.
SUBMERSIBLE ACTION The DIP is submersible, with the optional non-return valve
LARGE GRIP The pump got a great grip, whichmakes it easy to carry around
STAINLESS PROTECTION The stainless-steel impeller is resistant to corrosion and many chemicals
SAFE AIR INTAKEThe strainer prevents contaminants from entering the pump
LEAK-FREEA specially designed rotating mechanical seal prevents leakage
WIDE RANGEYou can choose pump for a high head or high flow based on your application
Hea
d
Flow chart
0
10
20
30
40
60
70
0
0 79
300 600 900
475 555
1200
158
1500 1800 2100
237 396
(m)
317 (US gpm)
(l/min)
50
(ft)
0
65
32
164
196
229
131
98
DIP 65
DIP 35 DIP 25
Specifications DIP 25 DIP 35 DIP 65Max. head feet 82 115 194Max. flow US GPM 444 349 174Max. air requirements US GPM 1110 1110 1110
ConnectionsFluid outlet in G 2 1/2 G 2 1/2 G 2 1/2Air inlet in G 3/4 G 3/4 G 3/4Air outlet in G 1 1/2 G 1 1/2 G 1 1/2
Weight and dimensionsWeight lb 51 51 51Length in 0.77 0.77 0.77Width in 0.94 0.94 0.94Height in 1.42 1.42 1.42
At 87 psi
18 www.atlascopco.com/weda
Specifications D0P 15N DOP 15FMax. head feet 194 194Max. flow US GPM 111 111Max. air requirements US GPM 539 539
Connections Fluid outlet in G 2 1/2 G 2 1/2Air inlet in G 3/4 G 3/4
Weight and dimensionsWeight lb 68 68Length in 1.28 1.28Width in 1.08 1.08Height in 1.92 1.92
DOP pneumatic pumpWhen the going gets tough, the tough get a DOP diaphragm pump. They are designed for the most polluted and viscous media, as well as highly abrasive and flammable fluids.
EASY TO HANDLE It only takes one person to handle the DOP
SUBMERSIBLEThe built-in non-return valve makes the pump submersible and independent of orientation; add a silencer for lower noise levels
LIFT MOREThe DOP can be connected in series to increase the lifting capacity, or “head”
PIVOTING CONNECTIONReduces stress on the hose
SAFE INTAKEThe air intake with strainer prevents contaminants from entering the pump via the air
SELF-PRIMINGReduces unnecessary handling in rough environments
REACH THE CORNERSThanks to the pivoting intake coupling together with an optional suction hose
STABLE OPERATIONS The strainer at the base prevents particles larger than 30 mm from passing through the pump
Hea
d
0
10
20
30
40
60
70
0
0 79
300 600 900
475 555
1200
158
1500 1800 2100
237 396
(m)
317 (US gpm)
(l/min)
50
(ft)
0
65
32
164
196
229
131
98
DOP 15
Flow chart
FlowAt 87 psi
19www.atlascopco.com/weda
Atlas Copco ABatlascopco.com
2958
190
0 00
v03
© A
tlas C
opco
Pow
er a
nd F
low
div
ision
. 201
9Product portfolio
*Multiple configurations available to produce power for any size application
ONLINE SOLUTIONS
Diesel and electric options available
PORTABLE1,6–12 kVA
MOBILE CONTAINERS9–1250* kVA 800–1450 kVA
INDUSTRIAL10–2250* kVA
GENERATORS
DEWATERING PUMPS
ELECTRIC SUBMERSIBLE250–16.200 l/min
833–23.300 l/minSMALL PORTABLE
SHOP ONLINEPARTS ONLINE
POWER CONNECT FLEETLINK
210–2500 l/min
Find and order the spare parts for power equipment. We handle your orders 24 hours a day.
Scan the QR code on your machine, and go to the QR Connect Portal to find all the information about your machine.
Intelligent telematics system that helps optimize fleet usage, reduce maintenance costs, ultimately saving time and cost.
SURFACE PUMPS
DIESEL LED AND MH
BATTERY LED ELECTRIC LED
LIGHT TOWERS
AIR COMPRESSORS AND HANDHELD TOOLS
AIR COMPRESSORS HANDHELD TOOLS1–116 m³/min7–345 bar
PneumaticHydraulicPetrol engine driven
LIGHT THE POWERYOUR SIZING TOOLA useful calculator to help you choose the best solution for your power and light needs
