Heidra® 300 Hydraulic Submersible Pumps

T he Heidra 300 hydraul ic submers ible pump is a self-contained,

hydraul ic-powered 12" (300 mm) submers ible pump with a diesel-dr iven hydraul ic power unit avai lable for heavy duty municipal and industr ial dewater ing and sol ids handl ing pumping appl icat ions.

A var iable displacement hydraul ic piston pump on the power pack del ivers hydraul ic f lu id to a f ixed displacement piston motor that dr ives the pumpend’s shaft, bear ings and cast steel impel ler. S imple engine thrott le adjustments al low changes to pump f low and head performance.

FeaturesCast iron pumpend with cast chromium steel impeller designed for general pumping with solids handling up to 3.75" (95 mm) in diameter.

•

Capable of flow rates to 6,000 GPM (1,363.3 m3/h) and heads to 200' (61 m).•

Unique double mechanical seal immersed in isolated oil bath for unlimited dry running capability.

•

Integral 200 gallon (757 l) fuel tank capacity provides over 24 hours of continuous operation.

•

Safety shutdown system incorporated into engine controls prevents equipment damage from engine fault or failure.

•

Standard PrimeGuard Controller provides programmable operations including setting maintenance timers.

•

Integrated steel cage on pumpend protects pump while submersed, provides a lifting bale for easy transfer and provides an anchor spot for the hydraulic fittings.

•

“Quick Disconnect” hydraulic fittings simplify setup, installation and shutdown.•

Standard JD6068H engine. Other models, including electric drive versions, available.•

© Copyright 2006 Godwin Pumps of America, Inc. .cnI ,aciremA fo spmuP niwdoG fo skramedart deretsiger era spmup rof egnaro roloc eht dna ardieH ,spmuP niwdoG

Specifications and illustrations are subject to revision without notice.

Drawings

Skid-Mounted Power Pack

Submersible Pump

80.5625"2046.29 mm

137.25"3486.15 mm

52.875"1343 mm

Skid-mounted, John Deere 6068H engineDry weight - 5200 lbs. (2358.68 kg)

HS300 pumpend pictured with optional critically silenced powerpack.

72" 1830 mm

41.375"1052 mm

4.5"115 mm

17.125" 435 mm

Suction opening

1.75" 44 mm

16.625"424 mm

LiftingEye

19.5" 495 mm

35.25"895 mm

15"382 mm

15.875" 403 mm

55.125" 1401 mm

11" 280 mm

14.75"375 mm

Discharge:12" ANSI Flange

(12) .875" studs on17" (432 mm) PCD

30.875"785 mm

19"483 mm

12.625"321 mm

29.75"757 mm

Pumpend dry weight - 2075 lbs. (941.2 kg)

He

idra

300

He

idra

300

Aquatech Pump and Power: Phone: 905-907-7852 • Fax: 905-907-1701

Aquatech Dewatering Company: Phone: 905-907-1700 • Fax: 905-907-1701

69 Connie CrescentConcord, ON L4K 1L3Email us: info@aquatd.com

www.aquatd.ca

Specifications

Engine JD6068H water-cooled diesel 275 HP (205 kW) @ 2,000 RPM

Fuel Consumption 13.5 GPH (51 l/h)Fuel Tank Capacity 200 gallons (757 l)Output Hydraulic Flow 85 GPM (19.3 m3/h)Output Pressure Control 4500 PSI (310 BAR)Hydraulic System Four pipe, closed loop hydrostatic driveReservoir 80 gallons (303 l)Control Valve Pressure compensated on/off valveConnections 1.25" (31.75 mm) quick disconnect feed (x2) and return

(x2); 0.75" (19 mm) quick disconnect case drainSupply Line Filter 125 micron, pleated gauzeReturn Line Filter 20 micron

Power Pack

Hydraulic Motor Fixed PistonDrive Pressure Up to 4500 PSI (310 BAR)Hydraulic Flow Up to 85 GPM (19.3 m3/h)Hydraulic Line Length Up to 100' (30.5 m) longer runs with larger diam. hoseSolids Handling Up to 3.75" (95 mm) in diameterPump Speed (RPM) Up to 1800 RPMImpeller Diameter 14.25" (362 mm)Discharge Flange 12" (300 mm) ASA 150Hydraulic Connections 4 - 1.25" (32 mm), 1 - 0.75" (19 mm) quick disconnectStrainer Nylon coated with 2.75" (70 mm) apertures

Submersible Pump

Materials of ConstructionPumpend Cast ironImpeller Cast steel Wearplates 25% Chromium iron front wearplate, nitride hardened

cast iron rear wearplateMechanical Seal Solid silicon carbide

Performance Curve

1200 R PM

1500 R PM

1800 R PM

Head

(ft.)

Pow

er (H

P)

225.0

25.0

50.0

75.0

100.0

125.0

150.0

175.0

200.0

1200 R PM

1500 R PM

1800 R PM220.0

40.0

60.0

80.0

100.0

120.0

140.0

160.0

180.0

200.0

6500.00.0 500.0 1000.0 1500.0 2000.0 2500.0 3000.0 3500.0 4000.0 4500.0 5000.0 5500.0 6000.0

NotesCurves based on pump speed. Performance will depend on hydraulic power unit.Published performance is achieved at total suction lift heads up to 15' (4.57 m). When greater, reduce performance.

Flow (US GPM)

40 80 120 1606000 5810 4870 30105480 5250 4700 30004850 4780 4500 2900

Performance Table

Output - GPM

Performance data listed in table and curves based on water test at sea level and 68°F (20°C). Maximum flows may require larger diameter pipes.

Diesel Set - JD6068H, 275 HP (205 kW) @ 2000 RPMImpeller Diameter: 14.25" (362 mm)