Comandos Originales Autocad

8/11/2019 Comandos Originales Autocad

1/6

;;; Program Parameters File For AutoCAD 2010; External Command and Command Alias Definitions

; Copyright (C) 1997-2009 by Autodesk, Inc. All Rights Reserved.

; Each time you open a new or existing drawing, AutoCAD searches; the support path and reads the first acad.pgp file that it finds.

; -- External Commands --; While AutoCAD is running, you can invoke other programs or utilities; such Windows system commands, utilities, and applications.; You define external commands by specifying a command name to be used; from the AutoCAD command prompt and an executable command string; that is passed to the operating system.

; -- Command Aliases --; The Command Aliases section of this file provides default settings for; AutoCAD command shortcuts. Note: It is not recommended that you directly; modify this section of the PGP file., as any changes you make to this sectionof the; file will not migrate successfully if you upgrade your AutoCAD to a; newer version. Instead, make changes to the new

; User Defined Command Aliases; section towards the end of this file.

; -- User Defined Command Aliases --; You can abbreviate frequently used AutoCAD commands by defining; aliases for them in the User Defined Command Aliases section of acad.pgp.; You can create a command alias for any AutoCAD command,; device driver command, or external command.

; Recommendation: back up this file before editing it. To ensure that; any changes you make to PGP settings can successfully be migrated; when you upgrade to the next version of AutoCAD, it is suggested that; you make any changes to the default settings in the User Defined Command

; Aliases section at the end of this file.

; External command format:; ,[],,[*],

; The bits of the bit flag have the following meanings:; Bit 1: if set, don't wait for the application to finish; Bit 2: if set, run the application minimized; Bit 4: if set, run the application "hidden"; Bit 8: if set, put the argument string in quotes;; Fill the "bit flag" field with the sum of the desired bits.; Bits 2 and 4 are mutually exclusive; if both are specified, only

; the 2 bit is used. The most useful values are likely to be 0; (start the application and wait for it to finish), 1 (start the; application and don't wait), 3 (minimize and don't wait), and 5; (hide and don't wait). Values of 2 and 4 should normally be avoided,; as they make AutoCAD unavailable until the application has completed.;; Bit 8 allows commands like DEL to work properly with filenames that; have spaces such as "long filename.dwg". Note that this will interfere; with passing space delimited lists of file names to these same commands.; If you prefer multiplefile support to using long file names, turn off


2/6

; the "8" bit in those commands.

; Examples of external commands for command windows

DEL, DEL, 8,File to delete: ,DIR, DIR, 8,File specification: ,SH, , 1,*OS Command: ,SHELL, , 1,*OS Command: ,START, START, 1,*Application to start: ,TYPE, TYPE, 8,File to list: ,

; Examples of external commands for Windows; See also the (STARTAPP) AutoLISP function for an alternative method.

EXPLORER, START EXPLORER, 1,,NOTEPAD, START NOTEPAD, 1,*File to edit: ,PBRUSH, START PBRUSH, 1,,

; Command alias format:; ,*

; The following are guidelines for creating new command aliases.; 1. An alias should reduce a command by at least two characters.

; Commands with a control key equivalent, status bar button,; or function key do not require a command alias.; Examples: Control N, O, P, and S for New, Open, Print, Save.; 2. Try the first character of the command, then try the first two,; then the first three.; 3. Once an alias is defined, add suffixes for related aliases:; Examples: R for Redraw, RA for Redrawall, L for Line, LT for; Linetype.; 4. Use a hyphen to differentiate between command line and dialog; box commands.; Example: B for Block, -B for -Block.;; Exceptions to the rules include AA for Area, T for Mtext, X for Explode.

; -- Sample aliases for AutoCAD commands --; These examples include most frequently used commands. NOTE: It is recommended; that you not make any changes to this section of the PGP file to ensure the; proper migration of your customizations when you upgrade to the next versionof; AutoCAD. The aliases listed in this section are repeated in the User Custom; Settings section at the end of this file, which can safely be edited while; ensuring your changes will successfully migrate.

1, *QSAVE

11, *MODEL2, *OPEN3, *PLOT4, *PAGESETUP5, *QUIT6, *NEW7, *CLOSE8, *GRID9, *SNAP10, *LAYEREVALCTL


3/6

A, *ARCAA, *AREA2AD, *AUDITAL, *ALIGNALE, *ALIASEDITAP, *APPLOADAR, *-ARRAYAS, *ATTSYNCB, *BREAKBB, *BREAKLINEBD, *-BOUNDARYBL, *-BLOCKBR, *BREAKLINEC, *CIRCLECB, *COPYBASECF, *CHAMFERCH, *CHANGEDI, *DISTDAR, *DIMARCDAL, *DIMALIGNEDDAN, *DIMANGULARDDS, *DSETTINGSDC, *DIMCONTINUEDD, *DIM

DE, *DIMTEDITDO, *DRAWORDERDR, *DIMRADIUSDT, *DTEXTDH, *DIMHORIZONTALDV, *DIMVERTICALDVV, *DIVIDEDDAD, *ATTDEFDDAE, *ATTEDITDDGR, *GROUPDDAP, *APPLOADDDAR, *ARRAYDDB, *BLOCK

DDBD, *BOUNDARYDDC, *DDCHPROPDDCX, *CLASSICXREFDDE, *DDEDITDDF, *FINDDDG, *GRADIENTDDH, *HATCHDDI, *INSERTDDML, *MLSTYLEDDL, *CLASSICLAYERDDLA, *LAYERDDLS, *LAYERSTATEDDLT, *LINETYPE

DDO, *OSNAPDDPT, *DDPTYPEDDPG, *PURGEDDR, *RENAMEDDRI, *REINITDDSH, *SUPERHATCHDDST, *STYLEDDU, *UNITSDDV, *VIEWDDVP, *VPORTS


4/6

DDW, *WBLOCKDDX, *XREFE, *ERASEEL, *ELLIPSEX, *EXPLODEEX, *EXTENDTR, *EXTRIMEXT, *EXTRUDEF, *FILLETH, *-HATCHI, *-INSERTJ, *JOINHL, *HIGHLIGHTL, *LINELA, *-LAYERLM, *LIMITSLI, *LISTLTS, *LTSCALELP, *LUPRECM, *MOVEMEA, *MEASUREML, *MLINEMA, *MATCHPROPMI, *MIRROR

MRT, *MIRRTEXTMS, *MSPACEMT, *MTEXTMV, *MVIEWO, *OFFSETOT, *OPTIONSOK, *OVERKILLP, *PANPE, *PEDITPG, *-PURGEPL, *PLINEPOL, *POLYGONPP, *-PAN

PS, *PSPACEQL, *QLEADERQV, *QVLAYOUTR, *REDRAWRC, *REFCLOSEREC, *RECTANGLERF, *REFEDITRG, *REGENRGA, *REGENALLRR, *RAYRO, *ROTATES, *SCALESU, *SUBTRACT

ST, *STRETCHTR, *TRIMTC, *TCOUNTU, *UNDOUN, *UNITSUNI, *UNIONUI, *UCSICONV, *-VIEWVT, *VTENABLEVP, *VPOINT


5/6

W, *WIPEOUTX, *-XREFXC, *XCLIPXL, *XLINEXO, *XOPENZ, *ZOOMZC, *LAYcurZF, *LAYfrzZI, *LAYisoZL, *lAYlckZM, *LAYmcurZN, *LayonZO, *LAYoffZT, *LAYthwZU, *LAYulk

; The following are alternative aliases and aliases as supplied; in AutoCAD Release 13.

AV, *DSVIEWERCO, *COPYDIMALI, *DIMALIGNEDDIMANG, *DIMANGULARDIMBASE, *DIMBASELINE

DIMCONT, *DIMCONTINUEDIMDIA, *DIMDIAMETERDIMED, *DIMEDITDIMTED, *DIMTEDITDIMLIN, *DIMLINEARDIMORD, *DIMORDINATEDIMRAD, *DIMRADIUSDIMSTY, *DIMSTYLEDIMOVER, *DIMOVERRIDELEAD, *LEADERTM, *TILEMODE

; Aliases for Hyperlink/URL Release 14 compatibility

SAVEURL, *SAVEOPENURL, *OPENINSERTURL, *INSERT

; Aliases for commands discontinued in AutoCAD 2000:AAD, *DBCONNECTAEX, *DBCONNECTALI, *DBCONNECTASQ, *DBCONNECTARO, *DBCONNECTASE, *DBCONNECTDDATTDEF, *ATTDEFDDATTEXT, *ATTEXT

DDCHPROP, *PROPERTIESDDCOLOR, *COLORDDLMODES, *LAYERDDLTYPE, *LINETYPEDDMODIFY, *PROPERTIESDDOSNAP, *OSNAPDDUCS, *UCS

; Aliases for commands discontinued in AutoCAD 2004:ACADBLOCKDIALOG, *BLOCK


6/6

ACADWBLOCKDIALOG, *WBLOCKADCENTER, *ADCENTERBMAKE, *BLOCKBMOD, *BLOCKBPOLY, *BOUNDARYCONTENT, *ADCENTERDDATTE, *ATTEDITDDIM, *DIMSTYLEDDINSERT, *INSERTDDPLOTSTAMP, *PLOTSTAMPDDRMODES, *DSETTINGSDDSTYLE, *STYLEDDUCS, *UCSMANDDUCSP, *UCSMANDDUNITS, *UNITSDDVIEW, *VIEWDIMHORIZONTAL, *DIMLINEARDIMROTATED, *DIMLINEARDIMVERTICAL, *DIMLINEARDOUGHNUT, *DONUTDTEXT, *TEXTDWFOUT, *PLOTDXFIN, *OPENDXFOUT, *SAVEAS

PAINTER, *MATCHPROPPREFERENCES, *OPTIONSRECTANGLE, *RECTANGSHADE, *SHADEMODEVIEWPORTS, *VPORTSEDWFX, *EXPORTDWFXEDWF, *EXPORTDWFEPDF, *EXPORTPDF-QPUB, *-EXPORT; Aliases for commands discontinued in AutoCAD 2007:RMAT, *MATERIALSFOG, *RENDERENVIRONMENTFINISH, *MATERIALS

SETUV, *MATERIALMAPSHOWMAT, *LISTRFILEOPT, *RENDERPRESETSRENDSCR, *RENDERWIN

; Aliases for commands discontinued in AutoCAD 2009:DASHBOARD, *RIBBONDASHBOARDCLOSE, *RIBBONCLOSE

; -- User Defined Command Aliases --; Make any changes or additions to the default AutoCAD command aliases in; this section to ensure successful migration of these settings when you; upgrade to the next version of AutoCAD. If a command alias appears more

; than once in this file, items in the User Defined Command Alias take; precedence over duplicates that appear earlier in the file.; **********----------********** ; No xlate ; DO NOT REMOVE

Documents

Comandos Originales Autocad