Embed Size (px)
Citation preview
CNG SOLUTIONS
www.brcfuelmaker.com
BRC FuelMaker means well valued, reliable and efficient compressed natural gas (CNG) home and vehicle refuelling appliances manufactured by M.T.M., Italian automotive specialist headquartered in Cherasco, Italy.Since 1977 M.T.M. has been designing, engineering and manufacturing state of the art clean energy fuel products that are sold in more than 70 countries in the world. The company’s global presence through fully owned subsidiaries and local distributors makes M.T.M. the world leading supplier of clean and cost effective alternative fuel systems for transportation and infrastructure.BRC FuelMaker is one of the product lines that M.T.M. manufactures to provide customers with their own CNG filling system capable of refuelling their vehicles anytime they need. BRCFuelMaker: the best choice to refuel your needs!
The Company
Available with and without internal gas dryer, air flow switch, gas sensor.
Phill✓ Easy to install and user friendly
✓ Internal gas sensor to ensure safe refuelling
✓ NGV1 nozzle compatible with all vehicles
✓ Connect it to the low pressure gas pipeline
✓ For indoor and outdoor installations
The one and only home refuelling appliance that fills up your car anytime you need!
Flow rate 1,5 m³/h
Maximum discharge pressure 207/248 bar
Inlet pressure range 17-35 mbar
Electrical supply 220 Volt AC, Single Phase, 50 Hz
Average power consumption over typical fill cycle 0.9 KWh
Compressor 4 stages, OIL FREE
Dimensions HxWxD 762x356x330mm
Ambient temperature rating -40º C to +46º C
Noise Level 40 dBA @ 5 m
CE CERTIFIED
OILFREE
NOSCHEDULED
MAINTENANCE SAFE OPERATION
FMQ-2✓ 1 or 2 fill hoses
✓ Multiple vehicle fuelling with remote panel or fill post
✓ Suitable for fast fill applications if connected to storage
✓ Connect it to the low pressure gas pipeline
✓ For outdoor installations
Refuel your private or company vehicles safely and efficiently!
To be completed with fill hoses. Can be connected to external fueling panel or storage.
FMQ-2.0 FMQ-2.5 FMQ-2-36
Flow rate 2,7 m³/h 3,4 m³/h 2,6 m³/hMaximum discharge pressure 207 bar 207 bar 248 bar
Inlet pressure range 17-35 mbar
Electrical supply 220 Volt AC, Single Phase, 50 Hz
Average power consumption over typical fill cycle 1 KWh
Compressor 4 stages, OIL FREE
Dimensions HxWxD 540x500x990mm
Ambient temperature rating -40º C to +46º C
Noise Level 49 dBA @ 5 m
CE CERTIFIED
OILFREE
NOSCHEDULED
MAINTENANCE SAFE OPERATION
FMQ-10✓ Solution for company refuelling needs. Planned for special applications
✓ Multiple vehicle fuelling with remote panel or fill post
✓ Suitable for fast fill applications if connected to storage
✓ Connect it to the low pressure gas pipeline
✓ For outdoor installations
Speed up refuelling as a real private filling station.
To be connected to external fueling panel.
FMQ-10 FMQ-8-36
Flow rate 13,6 m³/h 10,4 m³/h
Maximum discharge pressure 207 bar 248 bar
Inlet pressure range 50-100 mbar
Electrical supply 220 Volts AC, Single Phase, 50 Hz
Average power consumption over typical fill cycle 3.6 to 4.8 KWh
Compressor 4 stages, OIL FREE
Dimensions HxWxD 848x1228x813mm
Ambient temperature rating -40º C to +46º C
Noise Level 66 dBA @ 5 m
CE CERTIFIED
OILFREE
NOSCHEDULED
MAINTENANCE SAFE OPERATION
Remote Fuelling Panel
Can be mounted on external storage.
Auxiliary Fuelling PanelMax flow rate 85 m³/h
Max discharge pressure 207/248 bar
Max inlet pressure 248 bar
Dimensions HxWxD 279x203x311mm
Ambient temperature rating -40º C to +46º C
Max flow rate 85 m³/h
Max discharge pressure 207/248 bar
Max inlet pressure 248 bar
Dimensions HxWxD 279x203x311mm
Ambient temperature rating -40º C to +46º C
Can be mounted on external storage.
External Unmetered Fill Post
Dimensions and capacity range depend on number of cylinders. Suitable for fast-fill applications. To be connected to fueling panel or fill post. Complete with fittings, tubing, pressure valves.
CNG StorageDesign pressure 310 bar
Max internal pressure 248 bar
Tank certification PED
Levels of fill 1
Tank neck 1
Manual shut off valve 1
Gauge max rate 345 bar
Nozzle type NGV1
Standard compliance CE-ATEX
Ambient temperature rating -40º C to +46º C
Available with one or two fill hoses and nozzles. Complete with manual shut off valve, hose retractor, three-way 1/4 fill ball valve, in-line breakaway.
M.T.M. srl - BRC FuelMakerHeadquarters: Via La Morra, 1 • Plant: Via Industria, 6 • 12062 Cherasco (CN) ITALY
www.brcfuelmaker.com • [email protected]
cod
. TA
01
Z0
17
I-5
