Climapro2RF

www.glow-worm.co.uk

Installation

Wireless room thermostatwith receiver

- 1 -

INTRODUCTION

1 Instructionsguidance.........................................................................................................................31.1 Productdocumentation...........................................................................................31.2 Associateddocuments...........................................................................................31.3 Explanationofsymbols...........................................................................................3

2 Climapro2RFdescription...................................................................................................................32.1 Regulationandstatutoryrequirements..................................................................32.2 OperationalDiagram..............................................................................................3

3 Safetyinstructionsandregulations....................................................................................................33.1 Safetyregulations...................................................................................................33.2 Regulations.............................................................................................................4

4 Recycling...........................................................................................................................................44.1 Climapro2RF..........................................................................................................44.2 Packaging...............................................................................................................4

INSTALLATION

5 Installationlocation............................................................................................................................55.1 Roomthermostat....................................................................................................55.2 Radioreceiver........................................................................................................5

6 Climapro2RFInstallation...................................................................................................................56.1 Dimensions.............................................................................................................56.2 Listofcontents.......................................................................................................6

7 Fixing.................................................................................................................................................67.1 Fixingtheroomthermostat.....................................................................................67.2 Installingtheradioreceiver.....................................................................................7

8 Electricalconnections.......................................................................................................................88.1 Mainboard..............................................................................................................88.2 Connectingtheradioreceiver................................................................................88.3 Pairing(recognition)...............................................................................................9

9 Commissioning................................................................................................................................109.1 Appliancesincludedintheinstallation..................................................................109.2 Roomthermostat..................................................................................................10

10 Specificsettings...............................................................................................................................1010.1 Mainsettings........................................................................................................1010.2 Accesstotheinstallermenu................................................................................. 1110.3 Descriptionoftheinstallermenu.......................................................................... 1110.4 Heatingfunction.................................................................................................... 1110.5 Domestichotwaterfunction.................................................................................1210.6 Coolingfunction....................................................................................................1310.7 Options.................................................................................................................1310.8 Radio....................................................................................................................15

11 Control/Commissioning..................................................................................................................15

12 Userinformation...............................................................................................................................15

TAbLe Of CONTeNTS

- 2 -

MAINTeNANCe

13 Faultdiagnosis.................................................................................................................................16

TeChNICAL DATA

14 Climapro2RF...................................................................................................................................17

15 Radioreceiver..................................................................................................................................17

TAbLe Of CONTeNTS

0020094586_01-08/10-Glow-worm- 3 -

INTRODUCTION

INTRODUCTION

1 Instructions guidance

1.1 Product documentation

TheinstructionsareanintegralpartoftheClimapro2RFandmustbehandedtotheuseroncompletionoftheinstallationinordertocomplywiththecurrentregulation.

• Carefullyreadthemanual,toenablesafeinstallation,useandservicing.Noliabilitycanbeacceptedintheeventofdamagefornotcomplyingwiththeguidanceinthisinstructionmanual.

1.2 Associated documents

- Userinstructions

1.3 explanation of symbols

e DANGER: Risk of electric shock.

ATTENTION: Risk of damage to the Climapro2 RF or to its vicinity.

IMPORTANT: Useful information.

2 Climapro2 Rf description

2.1 Regulation and statutory requirements

CE Mark

TheCEmarkindicatesthattheappliancesdescribedinthismanualareincompliancewiththefollowingdirectives:

- EuropeanDirectiveNum.2004-108oftheEuropeanParliamentandtheCouncilregardingelectromagneticcompatibility

- EuropeanDirectiveNum.2006-95oftheEuropeanParliamentandtheCouncilregardinglowvoltage

- Directiverelatingtotelecommunicationsequipment(CounciloftheEuropeanCommunitydirectiveR&TTE99/5/CEE).

2.2 Operational Diagram

Theroomthermostatcommunicateswithacontrolunitviaaradioreceiver.

EBUS

1

2

3

4

5

Legend1 Wall support for the Climapro2 Rf2 Radio receiver connected to the heating system 3 Testing heating system4 Room thermostat 5 batteries

3 Safety instructions and regulations

3.1 Safety regulations

AllworkinsideClimapro2RFmustbecarriedoutbyaqualifiedprofessionalorGlow-worm’sAfter-SalesService.

Climapro2RFmustonlybeinstalledbyaqualifiedandresponsibleprofessional,soastorespecttheapplicableregulationsandrules

Respectthebasicsafetyinstructions:

• Stoptheappliance.

• Cuttheelectricalpowertotheappliance.

• Whenworkontheapplianceiscompleted,performanoperationaltestandcheckforsafety.

0020094586_01-08/10-Glow-worm- 4 -

INTRODUCTION

3.2 Regulations

Duringtheinstallationandactivationoftheappliance,thedecrees,directives,technicalregulations,standardsandclauseshereaftermustbecompliedwithintheversionsthatarecurrentlyinforce.

4 Recycling

The recycling of the packaging must be carried out by the qualified professional who installed the room thermostat.

4.1 Climapro2 Rf

Mostoftheapplianceismadeofrecyclablematerials.

Thissymbolindicatesthatthisunitmustnotbedisposedofwithhouseholdwaste.Itshouldbeselectivelycollectedforenergyrecovery,reuseorrecycling.

• Taketheunittoanappropriatecollectionpointforprocessing,energyrecoveryandrecyclingofwaste.

By complying with this directive, you will contribute to the preservation of natural resources and the protection of human health.

4.2 Packaging

WerecommendthatyourecyclethepackagingofClimapro2RFinaresponsiblefashion.

• Sortthewasteinordertoseparatethoseelementswhichcanberecycled(cardboard,plastics)andthosewhichcannotberecycled.

• Disposeofthewasteinaccordancewithexistingregulations.

0020094586_01-08/10-Glow-worm- 5 -

INSTALLATION

INSTALLATION

5 Installation location

5.1 Room thermostat

• Explainthefollowingrequirementstotheuser.

Install the Climapro2 Rf:

- inaroomprotectedfromfrost,

- onaninteriorwallofthemainroominthehome,

- atapproximately1.50metresfromthefloor(accordingtotheregulationsinforce).

Do not install the Climapro2 Rf:

- Nearsourcesofheat,suchasradiators,chimneywalls,televisionsorsolarradiation,

- aboveacookerthatislikelytogiveoffsteamandgrease,

- oncoldwalls,

- betweenunitsorbehindcurtainsorotherobjectsthatmightdisturbtemperaturerecordingfortheambientairintheroom,

- inaroomthatisheavilyloadedwithdustorwheretheatmosphereiscorrosive,

- nearaircurrentsthatmaycomefromdoorsorwindows.

5.2 Radio receiver

Not all appliances have a location for holding the radio receiver. In this case, the radio receiver can be fixed to the wall.

Insidetheappliance:

• Installtheradioreceiverintheapplianceinthelocationprovided(seetheapplianceinstallationmanual).

Outsidetheappliance:

• Installtheradioreceiverneartheapplianceatapproximately1.8metresfromtheground.

• Keeptheradioreceiverawayfromallmetallicparts(cables,electricalcircuitboxes,metalwalls)soasnottodisturbtheradiotransmission.

1500

6 Climapro2 Rf Installation

Allofthemeasurementsinthischapterareexpressedinmm.

6.1 Dimensions

6.1.1 Room thermostat

62.5

34

6

173

0020094586_01-08/10-Glow-worm- 6 -

INSTALLATION

6.1.2 Wall support for the ambient temperature thermostat

66

27

58

6

6.1.3 Radio receiver

5820

171

6.2 List of contents

Thiskitisdeliveredwith:

- Climapro2RFprogrammableroomthermostat

- WallsupportfortheClimapro2RF

- Radioreceiver

- Packetcontaining2fixingscrewswithrawlplugs

- 4“AALR6"alkalinebatteries

- EBUScableforradioreceiver

7 fixing

7.1 fixing the room thermostat

• Determinethelocationinwhichtheinstallationistobeeffected.Seethe"Installationselection"chapter.

A

B

1

2

4

3

5

6

Legend1 Drilling2 fixing screw3 fixing holes4 Room thermostat support5 Plugs6 Room thermostat

• Positiontheroomthermostatsupport(4)onawall.

• Drill(A)thescrewholes(1)inaccordancewith2mountingholes(3)inthewallsupport(4).

• Inserttherawlplugs(5)intheholes(1).

• Secure(B)theroomthermostatsupport(4)withscrews(2).

• Slidetheroomthermostat(6)intoitssupport(4).

0020094586_01-08/10-Glow-worm- 7 -

INSTALLATION

7.2 Installing the radio receiver

Case n°1 - radio receiver on control box unit

1

2

Legend1 Control box unit2 Radio receiver

• Slidetheradioreceiverintothenotches.

1

2

Legend1 Radio receiver2 Location of radio receiver

Case n°2 - radio receiver in the control box unit

A

B

1

2

Legend1 Control box unit2 Radio receiver

The receiver should be installed outside the appliance if the appliance control box does not have a location for the radio receiver.

Case n°3 - radio receiver outside appliance

• Determinetheinstallationlocation.Seethe"Installationlocation"chapter.

A

B

5

4

3

2

1

Legend1 Radio receiver2 fixing screw3 fixing holes4 Plugs5 Drilling

• Positiontheradioreceiver(1)onawall.

• Drillthehole(5)forthefixingscrewinaccordancewiththefixinghole(3)ontheunitorusethestickypadifprovided.

• Inserttherawlplug(4)inthedrilledhole(5).

• Fixtheradioreceiverwiththefixingscrew(2).

• Respectthestandardsforelectricalinstallationsinforceforconnectingtheebuscablebetweentheradioreceiverandtheappliance.

0020094586_01-08/10-Glow-worm- 8 -

INSTALLATION

8 electrical connections

The electrical connection of the room thermostat must be made only by a qualified engineer.

The radio receiver must be connected to the eBUS connector.

8.1 Main board

1 2 3

30 mm max.

Legend1 Connector2 electrical wires3 Insulation

Whenconnectingelectricalcablestoaconnectorofthemainboard:

• Maintainamaximumdistanceof30mmbetweentheconnector(1)andtheinsulation(3).

8.2 Connecting the radio receiver

The location of the EBUS terminal block varies according to the heating system. It is always identified by having "BUS" written on it.

• UsetheEBUSconnectioncableprovided.

• CuttheEBUSconnectioncabletothelengthnecessaryforyourinstallation.

Case n°1 - radio receiver on the control box

• ConnecttheEBUScable,followingtheorderofoperationsfrom(A)to(F).

A

B

24V

C

1

2

3

Legend1 Access for 24 V connection2 Control box3 Pre-cut part of control box unit

• Open(A)theaccessforthe24Vconnection(1).

• Cut(B)thepre-cutpart(3)ofthecontrolboxunit(2).

• Remove(C)thepre-cutpartofthecontrolboxunit(2).

D

RT 24V T° extBUS

BUS24 V

F

E

1

2

3

6

5

4

Legend1 ebUS connecting cable2 Link the connection terminal block on the room thermostat3 ebUS terminal block for the main board4 Control box unit5 Radio receiver connector6 Pre-cut part of control box unit

• Donotremovethelinkfromtheterminalblockconnectingtheroomthermostattothemainboard.

• Pass(D)theEBUScable(1)throughthecablepassagecreatedbyremovingthepre-cutpart(6).

• Connect(EandF)theEBUScable(1)totheradioreceiver'sconnector(5)andtotheEBUSterminalblockonthemainboard(3).Thereisnopolaritythatmustberespected.

0020094586_01-08/10-Glow-worm- 9 -

INSTALLATION

Case n°2 - radio receiver in the control box unit

A

RT 24V T° extBUS

BUS24 V

B1

2

3

5

4

Legend1 ebUS connecting cable2 Link for the connection terminal block on the room thermostat3 ebUS terminal block for the main board4 Control box unit5 Radio receiver connector

• Donotremovethelinkfromtheterminalblock(2)connectingtheroomthermostattothemainboard.

• Connect(AandB)theEBUScable(1)totheradioreceiver'sconnector(5)andtotheEBUSterminalblockonthemainboard(3).Thereisnopolaritythatmustberespected.

Case n°3 - radio receiver outside the appliance

1

2

3

Legend1 ebus and 0V connection2 Cable strain relief3 Connector for the radio receiver

• Donotremovethelinkfromtheterminalblockforconnectingthemainboard’sroomthermostat.

• ConnecttheEBUScabletotheradioreceiverconnectorandtheEBUSand0Vconnectionintheelectricalcartridge.Polarityisnotimportant.

8.3 Pairing (recognition)

8.3.1 The room thermostat delivered with a radio receiver

Thepairingbetweentheroomthermostatanditsradioreceiverrequiresnoactiononyourpart.Itiscarriedoutinthefactory.

8.3.2 The radio receiver with wireless outdoor sensor

Pairingbetweentheexternaltemperatureprobeandtheradioreceiverispossible(seetheinstallationmanualfortheexternalprobe).

Theradioreceivercanbepairedwiththewirelessoutdoorsensor(seetheoutdoorsensorinstallationmanual).

0020094586_01-08/10-Glow-worm- 10 -

INSTALLATION

9 Commissioning

9.1 Appliances included in the installation

• Switchontheappliancesthatmakeuptheinstallation(seetheinstallationmanuals).

9.2 Room thermostat

B

A

C

1

3

2

4

5

Legend1 battery cover2 batteries3 Insulating strip4 battery compartment5 Room thermostat

• Removetheinsulatingstrip(3)locatedinthebatterycompartment,respectingtheorderofoperations(A)to(C).

• Performthepairingoftheroomthermostatbasedonyourinstallation(seeChapterpairing).

10 Specific settings

Accessingtheroomthermostatsinstallermenuallowsforsomeadjustmentstobemadetotheinstallation(roomthermostatandremotesensor)andtheroomthermostat’susermenu.

10.1 Main settings

function Title ActionHeating Maximum

roomtemperature

Chooseavaluebetween5°Cand30°C.(factorysetting:30°C).

Roomtemperaturecorrection

Chooseavaluebetween-5°Cand5°Cwithastepof0.5°C.(factorysetting:0°C).

Modulatingcontrol

Activate(ON)ordeactivate(OFF)(defaultsetting:OFF).

Hotwater On/Off Activate(ON)ordeactivate(OFF)(defaultsetting:ON).

Maximumtemperatureofdomestichotwater

Chooseavaluebetween38°Cand65°C.(factorysetting:60°C).

Program Enable(YES)ordisable(NO)(defaultsetting:ON).

Coolingfunction On/Off Activate(ON)ordeactivate(OFF)(defaultsetting:OFF).

Program Enable(YES)ordisable(NO)(defaultsetting:OFF).

Options(outdoorsensor)

Adjustmentpossibleonlyifanoutdoorsensorisconnected

Outsidetemperaturecorrection

Chooseavaluebetween-5°Cand5°Cwithastepof1°C.(factorysetting:0°C).

Choosingtheheatingprofile

Chooseavaluebetween0.2and4.(factorysetting:2).Seetheinstructionsfortheoutdoorsensorconnectedtotheappliancetocarryoutthisadjustment.Note:thesettingsfortheoutdoorsensormadeontheappliancewillnolongerbeactive.

0020094586_01-08/10-Glow-worm- 11 -

INSTALLATION

10.2 Access to the installer menu

• Pressbutton for7seconds.

• Entertheinstallercode96.

10.3 Description of the installer menu

Menu browsing

Usethebuttons:

Selectwiththebutton:

Selectwiththebutton:- toreturntotheprofessionalmenuscreen,

- for3secondstoreturntotheuser'smainscreen.

Showing, enabling and disabling of functions is reflected in the user menu.

10.4 heating function

Menu This menu lets you:Setthemaximumadjustableroomtemperature.

Correctthemeasurementoftheroomtemperature.

Activateordeactivatethemodulatingcontrolforthehotwatertemperature.

(*)automaticadjustmentoftheheatingwatertemperature

10.4.1 To set the maximum room temperature

Thisfunctionletsyouadjustthemaximumroomtemperaturethatcanbesetbytheuser(valueadjustablebetween5and30°C-factorysetting:30°C).

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>heating>maximum room TO.

• Increaseordecreasewiththebuttons todisplaytheinitialcoolingtemperatureandpressthebutton .

10.4.2 Correcting the room temperature

Thisfunctionletsyourectifythetemperaturemeasuredbytheambienttemperaturethermostat(by+/-5°Cwithastepof0.5°C-(factorysetting:0).

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>heating>room temperature correction

• Increaseorreducewiththe buttonstodisplaythedesiredcorrectionandvalidatewithbutton .

10.4.3 Activating or deactivating the modulating control

Thisfunctionletsyouadapttheflowtemperatureintheheatingsystem.

0020094586_01-08/10-Glow-worm- 12 -

INSTALLATION

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>heating>modulating control

• Press tohighlightyourchoice(OnorOff)andpressthebutton toconfirm.

10.5 Domestic hot water function

Menu This menu lets you:Showorhidethedomestichotwaterfunctionintheendusermenu

Setthemaximumdomestichotwatertemperature.

Enableordisablethedomestichotwaterreheatingprogramintheendusermenu

10.5.1 The hot water function

Thisfunctionletsyouactivateordeactivatethehotwatermenufortheuser.

If the function is deactivated, the domestic hot water settings are adjusted via the appliance.

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen> hot water>on/off

• Press tohighlightyourchoice(activateordeactivate)andpressthebutton toconfirm.

10.5.2 Adjust the maximum domestic hot water temperature

Thisfunctionletsyouadjustthemaximumhotwatertemperaturethatcanbesetbytheuser(valueadjustablebetween38and65°C-factorysetting:60°C).

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>hot water>maximum temperature

• Increaseorreducewiththe buttonstodisplaythedesiredwatertemperatureandvalidatewithbutton .

10.5.3 To enable or disable the domestic hot water heating program

The hot water function must be activated before it can be programmed. Depending on the appliance, deactivation cuts off the hot water heating as well as the production of hot water (see the appliances installation manual).

Thisfunctionmakesitpossibletoallowtheusertoprogramdomestichotwaterreheating.

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>hot water>enable program

• Press tohighlightyourchoice(enableordisable)andpressthebutton toconfirm.

0020094586_01-08/10-Glow-worm- 13 -

INSTALLATION

10.6 Cooling function

Menu This menu lets you:

Activateordeactivatethecoolingfunctionintheendusermenu.

Enableordisablethecoolingprogramintheendusermenu.

10.6.1 Activate or deactivate the cooling function

Thisfunctionallowstheusertoactivateordeactivatethecoolingmenu.

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>cooling >on/off

• Press tohighlightyourchoice(activateordeactivate)andpressthebutton toconfirm.

10.6.2 enable or disable the cooling program

The cooling function must be activated before it can be programmed.

Thisfunctionmakesitpossibletoallowtheusertoprogramcooling.

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>cooling> enable program

• Press tohighlightyourchoice(enableordisable)andpressthebutton toconfirm.

10.7 Options

Menu This menu lets you:

Configurethewirelessoutdoorsensor:

- forcorrectingthemeasuredoutsidetemperature,

- forchoosingtheheatingcurve(seetheinstructionsforthewirelessoutdoorsensor).

Adjustthedateandtime

Choosethelanguage

Enterthetelephonenumberthatwillbedisplayedinafter-salesservicemessages.

Displayinformation:zone,typeandsoftwareversionfortheroomthermostat

10.7.1 Outdoor sensor settings

Correcting the outside temperature

Thisfunctionletsyourectifythetemperaturemeasuredbytheroomthermostat(by+/-5°Cwithastepof1°C-factorysetting:0).

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>settings >outdoor sensor settings>outside TO correction

• Increaseorreducewiththe buttonstodisplaythedesiredcorrectionandvalidatewithbutton .

Choosing the heating curve (gradient)

Thisfunctionletsyouchoosetheheatingprofile(valueadjustablebetween0.2and4-factorysetting:1.6).

• Seetheinstallationmanualfortheoutdoorsensor.

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen> settings>outdoor sensor settings >selectheating curve

0020094586_01-08/10-Glow-worm- 14 -

INSTALLATION

• Usingthe buttons,selectthedesiredheatingprofileandvalidatewiththe button.

10.7.2 Setting the current date

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>settings>date

• Setthedisplayformatofthecurrentdatebypressing andpressing toconfirm.Thereisachoicebetweenthefactorysettingday/month/yearandyear/month/day.

• Setthecurrentdatebypressing andpressingthebutton toconfirm.

10.7.3 Setting the current time

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>settings>language

• Setthetimebypressing andpressingthebuttontoconfirm.

10.7.4 Choose the language for the menus

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>settings>language

Todisplaytheadditionallanguages:

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>other

• Choosethelanguagewiththebutton andpressthebutton toconfirm.

10.7.5 Telephone After-Sales Service

Thisfunctionletsyouspecifythetelephonenumberthatwillbedisplayedinafter-salesservicemessagesfromtheroomthermostat.

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>settings>telephone

• Displaythedesirednumberwiththe buttonsandvalidatewiththe button.

• Validatethedashesfollowingthetelephonenumberwiththebutton.

10.7.6 General information on Climapro2 Rf

Thisfeatureallowsyoutodisplaythefollowinginformation:area,softwaretypeandversion.

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>settings>about

0020094586_01-08/10-Glow-worm- 15 -

INSTALLATION

10.8 Radio

Menu This menu lets you:

Establishtheconnectionbetweentheradioreceiverandtheroomthermostat.

Testthequalityoftheradiosignal(thermostatandwirelessoutdoorsensor).

10.8.1 Pairing

Thisfunctionletsyouperformthepairingbetweenthethermostatandtheradioreceiver.

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>Rf>pairing

10.8.2 Test

Thisfunctionletsyoutestthequalityofthesignalbetweentheroomthermostatandtheradioreceiver.

Inthecasewhereawirelessoutdoorsensorisincludedintheheatingsystem,theroomthermostatwillalsoindicatethequalityofthesignalbetweentheoutdoorsensorandtheradioreceiver.

Wait about fifteen minutes after activating the thermostat and the outdoor sensor before testing.

Signal Quality CommentExcellent

NormalfunctioningAverage

Poor Operatinglimit*

Null Inoperative*

(*) Check the room thermostat’s batteries (see the instructions). If the signal quality does not improve. Change the location of the appliances, reducing distances and removing obstacles.

• Fromtheinstallermenu(seeaccesstotheinstallermenu)>selectonthescreen>Rf>test

11 Control / Commissioning

Afterinstallingtheroomthermostat:

• Turnontheapplianceaccordingtotheoperatinginstructionsandcheckforcorrectoperation.

12 User information

Attheendoftheinstallation:

- explaintheoperationoftheapplianceanditssafetydevicestotheuser,ifnecessaryprovideademonstrationandansweranyquestions;

- givetheuseralltherequireddocumentation,

- fillinthedocumentswherenecessary;

- advisetheuseroftheprecautionsnecessarytopreventdamagetothesystem,applianceandthebuilding;

- remindtheusertoservicetheapplianceannually.

0020094586_01-08/10-Glow-worm- 16 -

MAINTENANCE

MAINTeNANCe

13 fault diagnosis

In case the signal is lost between the room thermostat and the radio receiver (e.g. : batteries exhausted), the heating system uses its own functioning settings.

Faults described in this chapter should be carried out by a qualified engineer and if needed by the After Sales Service.

Youwillfindalistofcertainerrorcodesintheusermanual.

5

4

3

2

1

Legend1 Radio receiver2 Cover for radio receiver3 Red LeD4 Radio receiver circuit board5 Green LeD

Intheeventofaproblem:

• Checktheerrormessagesintheroomtemperaturethermostat'sdisplayzone

• Removethecover(2)fromtheradioreceiver(1)toseethe2LEDs.

• Checkthestateofthe2LEDs(green(5)andred(3)locatedontheelectronicboard(4)intheradioreceiver.

Radio receiver

Cause Solution

GreenLEDoff

RedLEDoff

-Failureofelectricalsupply-DefectiveEBUSconnectioncable

•Ensurethatthereisnointerruptiontotheelectricitysupplyandthattheapplianceisproperlyconnectedandturnedon.•Checktheelectricalconnectionbetweenthereceiverandtheappliance.

RedLEDswitchedon

-Appliancefault-Radiosignaltransmissionerror-EBUScommunicationserror-Defectiveradiotransmitterorreceiver-EBUSconnectingcabledefective

•Checkthat:-Theappliancesfunctioningstatusiscorrect-Theroomthermostatbatteriesareproperlyinstalledintheircompartment-Thebatterypolarityisnotreversed-Thebatteriesarenotexhausted.Ifso,replacewithnewbatteries.•Checktheelectricalconnectionbetweenthereceiverandtheappliance.•Checktheradiocommunicationbetweenthethermostatandthereceiver.

0020094586_01-08/10-Glow-worm- 17 -

TECHNICALDATA

TeChNICAL DATA

14 Climapro2 Rf

Description Unit Climapro2 Rf

Transmission/receptionfrequency

MHz 868

Transmission/receptionfrequencybetweentheoutdoorsensorandtheroomthermostat

min 15

Transmission/receptionfrequencybetweentheapplianceandtheroomthermostat

min 10

Averageunobstructedworkingrange(*)

m 100

Averagerangewithinthehome(*)

m 25

(*)CanvaryaccordingtoinstallationconditionsandelectromagneticenvironmentRoom thermostatRoomtemperatureauthorizedintheroomwherethecontrolisinstalled

°C 50

Maximumauthorisedtemperatureofdomesticwater

°C 65

Dimensions:Height mm 173Width mm 62,5Depth mm 34Supply:4“AALR6"alkalinebatteries

V 4x1.5

Batterylife(**) month 18(**)UndernormalconditionsofuseRoom thermostat supportDimensions:Height mm 58Width mm 66Depth mm 27Spacingbetweentheroomthermostat(insupport)andthewall

mm 6

15 Radio receiver

Description Unit Radio receiverTransmission/receptionfrequency

MHz 868

Transmission/receptionfrequencybetweentheoutdoorsensorandtheroomthermostat

min 15

Transmission/receptionfrequencybetweentheapplianceandtheroomthermostat

min 10

Averageunobstructedworkingrange(*)

m 100

Averagerangewithinthehome(*)

m 25

(*)CanvaryaccordingtoinstallationconditionsandelectromagneticenvironmentRadio receiverDimensions:Height mm 20Width mm 171Depth mm 58Power-supplyvoltageEBUS V 24VElectricalconnectioncablesection

mm² 2x0.75

Max.lengthofelectricconnectioncables

m 300

0020094586_01-08/10

Because of our constant endeavour for improvement, details may vary slightly from those shown in these instructions.

Glow-worm,NottinghamRoad,Belper,Derbyshire.DE561JT