Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Chapter 66. Management and Monitoring in EIA6.1 Environmental Management Plan
Definition of an “Environmental ManagementPlan”: A plan or program that seeks to achieverequired end state and describes how activities,which have or could, have an adverse impact onthe environment, will be mitigated, controlled,and monitored during the commissioning,mobilization, construction, operation,maintenance and decommissioning of a project;and that the positive benefits of the projects areenhanced.
Purpose of the EMP• Encourage good management practices through planning andcommitment to environmental issues concerning any project;• It tells how the management of the environment is reported andperformance evaluated periodically;• To provide rational and practical environmental guidelines thatwill assist in minimizing the potential environmental impact ofactivities;• Helps in minimizing disturbance to the environment (physical,biological and ecological, socioeconomic, cultural, andarcheological,) ;• Combat all forms of pollution through monitoring air, noise, land,water, waste, and energy and natural resources;• Protection of sensitive and endangered flora and fauna;• Prevent land degradation;• Comply and adhere to all applicable laws, regulations, standardsand guidelines for the protection of the environment;
• Adopt best practicable waste management for all types of waste
(liquid and solid) with objective on prevention, minimization,
recycling, treatment or disposal of wastes;
• Describe all monitoring procedures required to identify impacts
on the environment;
• Train and bring awareness to employees and contractors with
regard to environmental obligations and compliance.
• Reduce environmental risk and provide better Health, Safety and
Environment (HS&E)
• Increase efficiency through minimum consumption and
conservation of energy deplete-able resources
• An EMP also provides with a plan answering - what, where, when, how
and who?
• Establishing the reporting system to be undertaken during the
construction.
• The EMP also serves to highlight specific requirements that will be
monitored during the development and should the environmental impacts
not have been satisfactorily prevented or mitigated, corrective action will
have to be taken.
Table 11: Environmental and Social Management Plan of Tana Kebele Market Upgrading Project
Phases of the project
Project Activity Potential ImpactRecommended Mitigation Measures,
frequency
ResponsibleInstitutions
Estimated Cost
Preconstruct
ion Phase
Site Clearing Solid waste generation Transport and disposethe wastes at themunicipal disposal site
sell the topsoil to users
Contractor andProponent
Dislocation of businessoperators
Leasing the land, provide inrent form, compensate in kindand monetary form
The proponent Refer RAPdocument
Construction
phase
Excavation and construction
Solid wastegeneration
affect the aestheticvalue of the area
Sorting recyclablesdisposing appropriatelyin to the municipaldisposal site.
Site clearing
Contractor -
Air pollution Water showering Asrequired
contractor -
Workers safety and health Supply of safety cloths andmaterials
Once per6month
contractor 20,000.00
Operation
Phase
Operation of businesstransaction andparking lots
Solid waste generation Collection of wastes andtransfer of the collected wastesto the waste collectors
Fourtimes permonth
Businessoperators & Cityadministration
37,980.00
Placement of dust bins Businessoperators
Cityadministration
127,940.00
Provide awareness creationworkshop to reduce the solidwaste generation at source
The proponent,BoH andBoEPLAU
10,000.00
Air pollution Set emission standards andconduct emission monitoring
Twice ayear
BoEPLAU 2000.00
Noise pollution Awareness creationEnforce legislations
Once ayear
Municipality,BoEPLAU
20,000.00
Fire hazard Fitting of fire extinguisher create an access road for
fire hazard preventionvehicles
contractors Included inconstruction cost
Operation of toiletsand business centers
sanitation Wastegeneration
Emptying and transport to theMunicipal waste treatment site
Once per6 month
The proponentsof the buildings
26,000
6.2 Environmental MonitoringEnvironmental monitoring is defined as "an activity undertaken to provide specific information on the characteristics and functions of environmental and social variables in space and time.“
Environmental monitoring is defined as the continuous assessment of environmental or socio-economic variables by the systematic collection of specific data in space and time.
Environmental monitoring is therefore one of the most important components of an EIA which is essential for:
• ensuring that impacts do not exceed the legal standards,• checking the implementation of mitigation measures in the manner described in the EIA report, and• providing early warning of potential environmental damages.
Environmental monitoring cont…Environmental monitoring can be used to:
Document the baseline conditions at the start ofthe EIAAssess performance and monitor compliancewith agreed conditions specified in constructionpermits and operating licenses and modifyactivities or mitigation measures if there areunpredicted harmful effects on the environment.Identify trends in impacts.Verify the accuracy of past prediction of impactsand the effectiveness of mitigation measures inorder to transfer this experience to futureactivities of the same type.
An environmental monitoring plan provides a deliverymechanism to address the adverse environmental impacts of aproject during its execution, to enhance project benefits, and tointroduce standards of good practice to be adopted for all projectworks. An environmental monitoring program is important as itprovides useful information and helps to:• Assist in detecting the development of any unwantedenvironmental situation, and thus, provides opportunities foradopting appropriate control measures, and• Define the responsibilities of the project proponents,contractors and environmental monitors and provides means ofeffectively communicating environmental issues among them.• Define monitoring mechanism and identify monitoringparameters.• Evaluate the performance and effectiveness of mitigationmeasures proposed in the Environment Management Plan (EMP)and suggest improvements in management plan, if required,• Identify training requirement at various levels.
6.2.1 Principles of monitoringIf the EIA monitoring process is to generate meaningfulinformation and improve implementation of mitigationmeasures, it must accomplish the following:•Determine the indicators to be used in monitoringactivities,•Collection of meaningful and relevant information,•Application of measurable criteria in relation to chosenindicators,•Reviewing objective judgments on the informationcollected,•Draw tangible conclusions based on the processing ofinformation,•Making rational decision based on the conclusion drawn,•Recommendation of improved mitigation measures to beundertaken.
6.2.2. Types of Monitoring• Various types of monitoring activity are currently in
practice, and each has some degree of relevance to an EIA study. The main types are briefly described below:
BaselineMonitoring
a survey should be conducted on basic environmental parametersin the area surrounding the proposed project before constructionbegins (pre-audit study). Subsequent monitoring can assess thechanges in those parameters over time against the baseline.
ImpactMonitoring
the biophysical and socio-economical (including public health)parameters within the project area, must be measured during theproject construction and operational phases in order to detectenvironmental changes, which may have occurred as a result ofproject implementation.
ComplianceMonitoring
this form of monitoring employs a periodic sampling method, orcontinuous recording of specific environmental quality indicatorsor pollution levels to ensure project compliance withrecommended environmental protection standards.
No.
Types Definitions Issues to be considered
Systems of approach
1
Baseline monitoring
It is the measurement of environmental parameters during a pre-project period
Identifying the resource base before the implementation of the proposed activities
Baseline data collection
2Impact monitoring
It is the measurement of environmental parameters during project construction and implementation
Identify/detect changes in the parameters
Visual observation Interview Document review
3
Compliance monitoring
Unlike the previous monitoring activities, takes the form of periodic sampling or process emissions to ensure that regulatory requirements are observed and standards are met.
Check against regulatory requirements and standards e.g. in relation to emission of pollutants.
Document review Interview Visual observation Sample testing
The following are the most common ones with common issues.
6.2.3.Environmental Monitoring Plan The monitoring plan includes the description of types of monitoring, the parameters to be monitored, methods to be used and schedules for operating monitoring activities.
Table 12: Environmental monitoring plan
Institutional Aspect
Institutional factors determining the effectiveness of monitoring should not be underestimated. There needs to be a firm institutional commitment by the agencies responsible for the monitoring process, particularly in regard to the following:willingness on the part of the institutions involved and organizational personnel to support the monitoring process with the necessary level of resources and authority, maintaining continuity in the monitoring programme,
Cont… technical capabilities of the personnel involved must be
developed,
integrity or honesty of the process must be maintained,
decisions must be taken based on a thorough review of results,
monitoring information must be made available to all agencies concerned, and
necessary institutional reforms need to be made within the planning and implementation agencies.
The costs involved in EIA monitoring should be borned by the
project proponent.
The reporting structure for EIA monitoring depends upon the
nature of the project and the analysis undertaken by the
agencies concerned.
6.3 Environmental AuditingDefinitions of Auditing•The United States Environmental Protection Agency (EPA, 1997)defines environmental auditing as a „documented, periodic andobjective review of facility operations and practices related tomeeting environmental requirements‟. An auditing protocol will alsoensure consistency in the level of compliance. The aims of anenvironmental audit should be to: verify compliance withenvironmental requirements, evaluate the effectiveness ofEnvironmental Management Systems, and to assess the risks fromregulated and unregulated practices (EPA, 1997).
•The International Chamber of Commerce defines an environmental audit
as „a management tool comprising a systematic, documented, periodic
and objective evaluation of how well environmental organization,
management and equipment are performing with the aim of helping to
safeguard the environment by:
(1) facilitating management control of environmental practices; and
(2) assessing compliance with company policies, which includes meeting
regulatory requirements. „
The International Standards Organisation (ISO) definesenvironmental audit as a „systematic, documentedverification process of objectively obtaining and evaluatingaudit evidence (verifiable information, records orstatements of fact) to determine whether specifiedenvironmental activities, events, conditions, managementsystems, or information about these matters conform withaudit criteria (policies, practices, procedures orrequirements against which the auditor comparescollected audit evidence about the subject matter), andcommunicating the results of this process to the client(organisation commissioning the audit).‟Environmental audits help in assuring the accuracy and relevance ofenvironmental monitoring, and the identification of issues via theaudit process may also lead to environmental standards that exceedregulatory requirements.
Environmental Auditing cont… Auditing refers to the examination and assessment of acertain type of performance.Environmental auditing is part of the overallenvironmental management system. It is used to checksystems and procedures against legal requirement,standards, best practices and professional judgment.In the case of an EIA, an audit assess the actualenvironmental impact, the accuracy of prediction, theeffectiveness of environmental impact mitigation andenhancement measures, and the functioning of monitoringmechanisms.The audit should be undertaken upon a project run inoperation, for some time, and is usually performed once ortwice in the entire project cycle.The following types of audit that are recommended to beimplemented in different phases of the EIA process:
In order to capitalize on the experience andknowledge gained, the last stage of an EIA is to carry outan Environmental Audit some time after completion ofthe project or implementation of a programme.It will therefore usually be done by a separate team ofspecialists to that working on the bulk of the EIA. Theaudit should include an analysis of the technical,procedural and decision-making aspects of the EIA.
•Technical aspects include:•the adequacy of the baseline studies,• the accuracy of predictions and•the suitability of mitigation measures.
•Procedural aspects include:• the efficiency of the procedure,• the fairness of the public involvement measures and•the degree of coordination of roles and responsibilities.•Decision-making aspects include:•the utility of the process for decision making and• the implications for development, (adapted fromSadler in Wathern, 1988).•The audit will determine whether recommendationsand requirements made by the earlier EIA steps wereincorporated successfully into project implementation.•Lessons learnt and formally described in an audit cangreatly assist in future EIAs and build up the expertiseand efficiency of the concerned institutions.
6.3.1 Types of and issues to be consideredThe following are few of major environmental auditing and the mostcommon issues to be considered.
Types of Audit
Definition Issues to be considered Systems of approach
Compliance audit
It is the verification process where by thecompany established the extent to which itis complying with environmentallegislation, discharge and emissionconsent limits, building permit(standards).
Check against that all relevantenvironmental legislation andstandards are being considered
Interview Visualobservation Documentreview
Environmental riskaudit
It is the process of conducing anassessment to identify potential riskpoints in the chain from receipt ofraw material through the productionprocesses to storage and distribution
Assess conditions &working procedures Assess the likelihood of anenvironmentally damagingoccurrence and theconsequences of the event.
Interview Visualobservation Documentreview
Reacquisition audit
This is commonly undertaken beforethe transfer of ownership from oneindividual to another.
Assess contaminated land buildings Undertake historical survey throughidentifying past and current activities Undertake site assessment Undertake sample test
Interview Document review Visualobservation Laboratory testing
Management systemsaudit
It is the process of checking the system orprocedures against the existing policy andstandard and relevance of those standardsand procedures for ensuring continualimprovement in environmental
performance.
Check operations againstwritten procedures Check their continualimprovement program
Interview Visualobservation Documentreview
Types of AuditDecision PointAudit
examines the effectiveness of EIA as a decision-making tool
ImplementationAudit
ensures that approved conditions have beenmet
PerformanceAudit
examines the responses of agencies concernedwith project management
Project ImpactAudit
examines environmental changes arising fromproject implementation
PredictiveTechnique Audit
examines the accuracy and utility of predictivetechniques by comparing actual againstpredicted environmental effects
EIA ProceduresAudit
critically examines the methods and approachadopted during the EIA study
6.3.2 Environmental Auditing Plan• Environmental Audit should be carried out upon the completion
of project construction and after 2 years of project operation inorder to obtain information on:
• the condition of natural/social/economical resources prior toproject implementation after the project construction iscompleted,
• whether or not, all the mitigation measures implemented areeffective to control adverse impact, or enhance beneficial impacts,
• whether or not mitigation measures implemented are effective tocontrol adverse impact, or enhance beneficial impact,
• whether or not all degraded landscape due to projectimplementation have been restored into original condition,
• what are the impacts of boom-bust scenario among the workforceinvolved in project implementation and the local economy, and
• the effect on the local economy of project implementation.• Information from monitoring output should also be utilized for
carrying out environmental audit
For effective EIA study there is need to:
•increases the trained EIA professionals,
•involvement of private sector companies /firmsand consultancies in EIA study,
•institutionalize EIA study, research andaccrediting EIA professionals and institution inorder to maintain the quality, and
•involvement of academic institutions forpreparing trained human resources required.
6.4. Environmental impact assessment report writing6.4.1. BackgroundReport writing is an important part of any EIA study thatenable to communicate the findings of the study to a widerange of professionals, decision makers, administrators andthe public. Each individual EIA report should ideally betailored to fit the circumstances of the project. However, itis useful to follow certain general guidelines to fit togetherthe essential components of the study so as to generate acoherent advisory report helpful to the decision makers aswell as the general public. A brief description of the typicalcontents of each section of an EIA report is given below.
6.4.2. Contents of EIA reportI) Executive summaryThe summary has to be concise and present the highlightof the main issues pertinent to decision makers on theproject. It should be developed in non-technical termssuch that decision makers and other stakeholders mayreadily understand it.II) Details of the report1. IntroductionThis part would be introductory in nature and shouldprovide a background of the project. It presents a reviewof the existing situation and demonstrates the need forthe proposed project. Details regarding the compositionof the EIA study team, the budget adequacy (inprofessional person), work plan and the reportorganization should also form a part of this category.
2. The site and surroundingsThe site and surrounding area should be described in
this part. This part should include the followinginformation.• A description of the location and layout, including avicinity map.• Existing land use patterns should be described.• Existing water body and water use in the area.• Demographic profile which includes population density,sex, age, etc• Soil profiles, including identification of soil types,erosion, geology etc• Hydrology and water quality, resources.• Meteorological data and air quality etc.• Ecological data would be included.
3) About the projectThis part should describe the relevant systems of theproposed project. This should include the plant layout,inclusive of the drainage system, description of materialsutilized and produced (mass balance), design criteriaadopted and the access ways to be used. Projectinformation should be described in terms of thefollowing activities, such as site preparation, operationon site, transportation, welfare and closure.4) Environmental effects of project operationThe anticipated impacts of the project operation on theenvironment should be described in this part. EIAmethods such as matrix and network, together with toolssuch as predication models, may be useful at this stage.All direct and indirect impacts should be speculated atthis stage.
5) Evaluation and analysis of impactThe type of evaluation method or tool, for example,matrix, network, GIS, cost-benefit analysis, etc used toquantitatively evaluate the impact due to the proposedaction, should be highlighted in this part of the report.6) Design of mitigation measuresIn this part of the report, mitigative measures, which areestablished to prevent, reduce or compensate forimpacts mentioned under part 5 are detailed. Findingbetter ways of doing things, minimize or eliminatenegative impacts, enhance benefits and protect publicand individual rights to compensation are commonmitigative measures.
7) Environmental Management Plan (EMP)This part should describe in detail the implementation plan to
be adopted by the proponent during implementation for mitigation,protection or enhancement measures which are recommended inpart 6. This part is the most crucial and significant part of the entireEIA report. It is therefore essential that this part should bepresented with precision and clarity. The outline may be structuredas follows:• Objective;• Work plan/Implementation schedule;• Resources requirements;
ManpowerMaterial provision/availabilityBudgetary provision for EMP.
8) Environmental monitoring programsThe proposed monitoring programs to be implemented to monitor environmental impacts due to the operation of the project should be described in this part. The programs should be initiated prior to the commencement of the construction activities.