Upload
vuhuong
View
224
Download
1
Embed Size (px)
Citation preview
CES Rail Systems
cescolor.qxd 9/11/01 3:27 PM Page 7
Len & Jerry's Modular Components and Ergonomic Systems, Inc. 6301 Hughes Drive Sterlimg Heights MI 48312 586.939.9939
Featuring
Table of ContentsRails
Typical Rail SystemTypical Stack Up DimensionsBridge Crane Assembly & How To OrderSingle Rail Product InformationDouble Rail Product Information
HANGERSRunway Block Hanger AssyAdjustable Hanger AssyBeam Clamp AssyI-Beam Hanger AssyAdjustable I-Beam Hanger AssyDrop Angle Hanger Beam Clamp AssyDrop Angle Adjustable Hanger Beam Clamp
TROLLEYSHook Mount Trolley Assy
END TRUCKSSingle End Truck AssyDual End Truck Hanger AssyRigid Single End Truck AssyRigid Dual End Truck Assy
Splice KitRail Stack KitEnd Stops
Redundant End StopAdjustable Mid-Rail Stop
MiscellaneousSafety Cable AssyTelescoping Rail Hanger AssySingle Telescoping Rail End Truck
Light Duty Jib Cranes 220 Degree RotationLight Duty Jib Crane 360 Degree Rotation
Robo Jib™ 360 Degree RotationWith Stack Rail
Linear Track SystemsVertical Balancer Arm
3556789
1011121314151617181920212223242526272829303132333435363738
1. Know Your Infrastructure.CES structural hangers aredesigned to work with I-beam structural supports.The assorted standard CESstructural hangers aredesigned to fit flanges mea-suring 2.33 inches to 8 inches. For cases where an Overhead Rail SuspensionSystem cannot be used, CESoffers a Floor-Mounted RailSuspension System made with steel I-beam posts.
2. Make Sure Your StructureIs Level.If you are not working in alevel environment, it may benecessary to compensate forunevenness by usingAdjustable Height Hangers.
3. Know Your Elevations:Operator Working Heightand Structural SuspensionPoints.Be sure you know the relation-ship between your workingheight and the elevation ofyour overhead structure.Where high ceilings are aproblem, Extended Hangersare available. Extended stackhangers can only be used withdirect load applications andthey require Sway Bracingwhen they are longer than 2 feet (maximum length is 12 feet). For cases wherestack-up measurements indicate tight head clearance,CES offers Rigid Hangers. Totalsystem stack-up height can be12-3/4” from top of runway tobottom of bridge.
4. Choose Your End Trucks.An End Truck, a combinationof a trolley and a rail structuralhanger, joins the runway to the bridge. Call CES CustomerService for information on ourBridge End Truck on yourexisting runway. Whateveryour system configuration is,the end truck trolley must fitthe runway, and the end truckhanger must fit the bridge.
5. Choose Your Bridge.A runway-bridge system provides access to your entirework area, allowing total freedom of movement in theX-Y or horizontal plane. Whilebridge rail selection is similarto runway rail section, there isan additional consideration:
are you offset (cantilevered) or direct loading? A SingleBridge is used for direct loadapplications (typically balancerapplications).
6. Choose Your LoadTrolley(s) (fig. 5).Load Trolleys must match theprofile of the rail you chose forthe bridge portion of your railsystem. Most single bridgeconfigurations are balancerapplications and require aBalancer Trolley.
7. Choose Your HoseManagement.Four variations of HoseManagement are available for your rail system:
RailsOverhead RailSuspensionSystem.Available in dual or single bridge configurations.
Floor-Mounted RailSuspension System.Available in dual or singlebridge configurations.Single Bridge shown.
Know What Type OfStructural Supports Are In Your WorkEnvironment.• I-beam overhead
structural steel (fig. 1)
• C-channel overhead structural steel
• No overhead structural steelavailable – Floor-mountedsystem required
Know Your Elevations –Operator Elevation,Construction Plane AndSuspension Points.• Fixed height hangers
• Adjustable height hangers
• Rigid hangers
• Extended hangers Choose Your Runway.
Choose YourEnd Trucks.
figure 4
figure 2
2411D CES binder.qxd 9/25/01 3:28 PM Page 12
Page 3
for your rail system:1. 3/8 inch coiled hose
management2. 1/2 inch coiled hose
management
Coiled HoseCoiled hose is supported by a runner cable that runs thelength of the rail and is supported at each end by ahose management cablebracket. The natural tension of coiled hose may cause the bridge or fixture to drift.To reduce drift and to reducewear on the lead coil, leaderhose is attached near the fixture end of the messenger cable.
CES would like to help you find a safe and efficient solution to your ergonomic challenges. Supplied with basic data about your company’s application and environment,our qualified representatives can assist you in selecting options and developing alternatives when designing your rail system. The diagram and descriptions below will give you a fundamental understanding of the CES Rail System.
Choose YourAccessories.
figure 1
figure 3
figure 5
Choose Your Bridge(Single Or DualConfiguration).
Choose A HoseManagement Kit.
Low ProfileEnd Truck.
Choose YourTrolleys.
Make Sure YourSystem Is SecuredWith Safety Cable.
TelescopingBridge System.
2411D CES binder.qxd 9/13/01 11:05 AM Page 13
Page 4
0.63[16.0]
7.89[200.4] 6.52
[165.6]
18.98[482.2]
12.73[323.4]
8.81 [223.9] TYP.
2.63[66.8]
17.54[445.5]
15.61[396.4]
14.15[359.3]
Typical Stack Up Dimensions #
Typical Rail SystemRAILS
(2) RUNWAY RAIL#860260-10
(2) SINGLE END TRUCKASSEMBLY #860490
(4) RUNWAY HANGERASSEMBLY #860620
(6) END STOPASSEMBLY #860480
(1) BRIDGE RAIL#860260-08
BLOCK HANGER/BEAMCLAMP ASSEMBLY #860620
ADJUSTABLE HANGER/BEAMCLAMP ASSEMBLY #860630 BLOCK HANGER
ASSEMBLY #860180
END TRUCK HANGERASSEMBLY #860490
END STOP #860480
RIGID END TRUCK#860450
END TRUCK#860490
2411D CES binder.qxd 9/25/01 3:29 PM Page 14
Page 5
Bridge Crane Assembly — Example Of How To Order
EXAMPLE:
RAILS
7
The Bridge Crane Assembly Consists Of:One Bridge Beam (Section Of Rail)Two End Truck Assemblies (Mounted To The Bridge With A Trolley To Roll Inside Of The Runway, Safety Cables Will Be Pre-Installed)Two End Stops (One Installed At Each End Of The Bridge)Redundant End Stops Are Available (Please Specify)
Redundant End Stop (Optional)
Total Bridge Length In Feet
Bridge Span In Feet
Type Of Rail CES — Single StackCED — Double Stack
END TRUCK’S
Single Articulating
Dual Articulating
Single Rigid
Dual Rigid
BRIDGE CRANE ASSEMBLY
C E S 0 4 0 6 S A R
END TRUCK ASSEMBLY
BRIDGE RAIL
SPAN12” STD.
OVERHANG
TOTAL BRIDGE LENGTH
END STOP ASSEMBLY
REDUNDANT END STOP (OPTIONAL)
SINGLE END STOP
2411D CES binder.qxd 9/25/01 3:30 PM Page 15
Page 6
Single Rail Product InformationRAILS
Span Between Suspension Points Deflection Limits Point LoadFeet Inches Meters Millimeters 1/450 in 1/450 mm 1/550 in 1/550 mm 1/450 lb. 1/450 kg 1/550 lb. 1/550 kg5 60 1.52 1524 0.13 3.30 0.11 2.70 3000 1364 2900 13186 72 1.82 1828 0.16 4.00 0.13 3.30 2450 1114 2000 9097 84 2.13 2133 0.19 4.80 0.15 3.80 1800 818 1425 6488 96 2.43 2438 0.21 5.30 0.17 4.30 1350 614 1100 5009 108 2.74 2743 0.24 6.00 0.20 5.00 1100 500 900 409
10 120 3.04 3048 0.27 6.80 0.22 5.50 880 400 720 32711 132 3.35 3352 0.29 7.30 0.24 6.00 710 323 590 26812 144 3.65 3657 0.32 8.10 0.26 6.60 610 277 490 22313 156 3.96 3962 0.35 8.80 0.28 7.10 525 239 415 18914 168 4.26 4267 0.37 9.30 0.31 7.80 440 200 370 16815 180 4.57 4572 0.40 10.10 0.33 8.30 390 177 320 14516 192 4.87 4876 0.43 10.90 0.35 8.80 340 155 280 12717 204 5.18 5181 0.45 11.40 0.37 9.30 300 136 250 11418 216 5.48 5486 0.48 12.10 0.39 9.90 270 123 220 10019 228 5.79 5791 0.51 12.90 0.41 10.40 245 111 195 8920 240 6.09 6096 0.53 13.90 0.44 11.10 220 100 180 8221 252 6.40 6400 0.56 14.20 0.46 11.60 200 91 160 7322 264 6.70 6705 0.59 14.90 0.48 12.10 180 82 150 6823 276 7.01 7010 0.61 15.40 0.50 12.70 165 75 135 6124 288 7.31 7315 0.64 16.20 0.52 13.20 150 68 125 5725 300 7.62 7650 0.67 17.00 0.55 13.90 140 64 115 5226 312 7.92 7924 0.69 17.50 0.57 14.40 130 59 105 4827 324 8.25 8255 0.72 18.20 0.59 14.90 120 55 95 4328 336 8.53 8534 0.75 19.00 0.61 15.40 110 50 90 41
PART NUMBER:
Indicates Length Of Rail In Feet (12=12 Feet)
Indicates Cross Section
8 6 0 2 6 0 - 1 2
5.10[129.54]
2.58[65.53]
0.86[21.84]
1.29[32.77]
4.94[125.48]
MOMENTS OF INERTIA: X: 10.4738 Y: 12.4815WEIGHT PER FOOT: 5.29 LBS.
3.68[93.47]
1.73[43.94]
2411D CES binder.qxd 9/13/01 11:05 AM Page 16
Page 7
Double Rail Product InformationRAILS
Span Between Suspension Points Deflection Limits Point LoadFeet Inches Meters Millimeters 1/450 in 1/450 mm 1/550 in 1/550 mm 1/450 lb. 1/450 kg 1/550 lb. 1/550 kg5 60 1.52 1524 0.13 3.30 0.11 2.70 3000 1364 3000 13646 72 1.82 1828 0.16 4.00 0.13 3.30 3000 1364 3000 13647 84 2.13 2133 0.19 4.80 0.15 3.80 3000 1364 3000 13648 96 2.43 2438 0.21 5.30 0.17 4.30 3000 1364 2700 12279 108 2.74 2743 0.24 6.00 0.20 5.00 2620 1191 2140 973
10 120 3.04 3048 0.27 6.80 0.22 5.50 2110 959 1730 78611 132 3.35 3352 0.29 7.30 0.24 6.00 1750 795 1435 65212 144 3.65 3657 0.32 8.10 0.26 6.60 1470 668 1200 54513 156 3.96 3962 0.35 8.80 0.28 7.10 1250 568 1025 46614 168 4.26 4267 0.37 9.30 0.31 7.80 1080 491 885 40215 180 4.57 4572 0.40 10.10 0.33 8.30 950 432 775 35216 192 4.87 4876 0.43 10.90 0.35 8.80 825 375 680 30917 204 5.18 5181 0.45 11.40 0.37 9.30 730 332 600 27318 216 5.48 5486 0.48 12.10 0.39 9.90 660 300 540 24519 228 5.79 5791 0.51 12.90 0.41 10.40 585 266 480 21820 240 6.09 6096 0.53 13.90 0.44 11.10 530 241 430 19521 252 6.40 6400 0.56 14.20 0.46 11.60 480 218 390 17722 264 6.70 6705 0.59 14.90 0.48 12.10 435 198 360 16423 276 7.01 7010 0.61 15.40 0.50 12.70 400 182 325 14824 288 7.31 7315 0.64 16.20 0.52 13.20 370 168 300 13625 300 7.62 7650 0.67 17.00 0.55 13.90 340 155 275 12526 312 7.92 7924 0.69 17.50 0.57 14.40 315 143 255 11627 324 8.25 8255 0.72 18.20 0.59 14.90 290 132 235 10728 336 8.53 8534 0.75 19.00 0.61 15.40 270 123 220 100
PART NUMBER:
Indicates Length Of Rail In Feet (12=12 Feet)
Indicates Cross Section
8 6 1 1 4 0 - 1 2
9.79[248.66]
4.92[124.97]
MOMENTS OF INERTIA: X: 25.4000 Y: 24.9631WEIGHT PER FOOT: 10.58 LBS.
2411D CES binder.qxd 9/13/01 11:05 AM Page 17
Page 8
Rigid Mount Close Hanger Assembly #860920 Capacity…3000 Lbs.HANGERS
1.28[32.51]
REF.
.84[21.34]
REF.
SAFETY CABLE
2411D CES binder.qxd 9/13/01 11:05 AM Page 18
Page 9
Runway Block Hanger Assembly #860180 Capacity…3000 Lbs.HANGERS
1.38[35.05]
REF.
SAFETY CABLE
41/64 DIA. THRU REF.
1.69 [42.93]REF.
2.00 [50.80]REF.
3.69 [93.73]REF.
6.29 [159.77]REF.
5.50 [139.70]REF.
.69 [17.53]REF.
.63 [16.00]REF.
1.38[35.05]
REF.
.69REF.[17.53]
2.50[63.50]CENT.REF.
2411D CES binder.qxd 9/13/01 11:05 AM Page 19
Page 10
Adjustable Hanger Assembly #860240 Capacity…3000 Lbs.HANGERS
1.0620[26.97]FULLY
UP
2.1814[55.40]FULLYDOWN
2.00[50.80]
REF.
2.00[50.80]
REF.
SAFETY CABLE
41/64 DIA. THRU REF.
2411D CES binder.qxd 9/13/01 11:05 AM Page 20
Page 11
NOTE: THIS HANGER CAN BE CONFIGURED FOR PARALLEL ORPERPENDICULAR MOUNTING.HANGER WILL ACCOMMODATEFLANGE WIDTHS FROM 2.33[59.18mm] TO 8.00 IN [203.20mm] .
Beam Clamp Assembly #860900 Capacity…3000 Lbs.HANGERS
4.00[101.60]
REF.
3.13[79.50]
REF.
8.00[203.20]
MAXIMUM
6.00[152.40]
REF.
2.00[50.80]
REF.
2.33[59.18]
MAXIMUM
1.87[47.50]
REF.
1.38[35.05]
REF.
2.00[50.80]
REF.
12.00[304.80]
REF.
41/64 DIA. THRU REF.
2411D CES binder.qxd 9/25/01 3:31 PM Page 21
Page 12
I-Beam Hanger Assembly #860930 Capacity…3000 Lbs.HANGERS
11.35[288.29]
SAFETY CABLE
NOTE: THIS HANGER CAN BE CONFIGURED FOR PARALLEL ORPERPENDICULAR MOUNTING.HANGER WILL ACCOMMODATEFLANGE WIDTHS FROM 2.33[59.18mm] TO 8.00 IN [203.20mm] .
2411D CES binder.qxd 9/13/01 11:05 AM Page 22
Page 13
Adjustable I-Beam Hanger Assembly #860940 Capacity…3000 Lbs.HANGERS
9.91[251.71]
SAFETY CABLE
NOTE: HANGER WILL ACCOMMODATEFLANGE WIDTH’S FROM 2.33 [59.18mm]TO 8.00 IN [203.20mm].
2411D CES binder.qxd 9/13/01 11:06 AM Page 23
Page 14
Drop Angle Hanger Beam Clamp Assembly #860850 Capacity…3000 Lbs.HANGERS
15.02[381.51](SHOWN)
MIN.
12.00[304.80](SHOWN)
MIN.
20.10[510.54]
REF.
SAFETY CABLEHOLES
SAFETY CABLE
NOTE: THIS HANGER CAN BE CONFIGURED FOR PARALLEL ORPERPENDICULAR MOUNTING.HANGER WILL ACCOMMODATEFLANGE WIDTHS FROM 2.33[59.18mm] TO 8.00 IN [203.20mm] .
2411D CES binder.qxd 9/13/01 11:06 AM Page 24
Page 15
Drop Angle Adjustable Hanger Beam Clamp Assembly #860860 Capacity…3000 Lbs.HANGERS
17.43[442.72](SHOWN)
MIN.
12.00[304.80](SHOWN)
MIN.
22.54[572.52]
REF.
SAFETY CABLEHOLES
SAFETY CABLE
7
NOTE: HANGER WILL ACCOMMODATEFLANGE WIDTH’S FROM 2.33 [59.18mm]TO 8.00 IN [203.20mm].
2411D CES binder.qxd 9/13/01 11:06 AM Page 25
Page 16
Trolley Assembly #860140 Capacity…1500 Lbs.TROLLEYS
2.49 [63.25]REF. 1.25
[31.75]REF.
SAFETY CABLE2.00[50.80]
REF. .75 [19.05]REF.
12.38[314.45]
REF.
9.19[243.43]
REF.
4.50 [114.30]REF.
1.83[46.48]
REF.
1.50[38.10]
REF.
6.00 [152.40]REF.
41/64 DRILL THRU REF.CLEARANCE FOR M16 OR 5/8”HEX HEAD BOLT
41/64 DRILL THRU REF.CLEARANCE FOR M16 OR 5/8”HEX HEAD BOLT
2411D CES binder.qxd 9/13/01 11:06 AM Page 26
Page 17
Hook Mount Trolley Assembly #860750 Capacity…1500 Lbs.TROLLEYS
3.11[78.99]
2411D CES binder.qxd 9/13/01 11:06 AM Page 27
Page 18
End Truck Hanger Assembly #860460 Capacity…3000 Lbs.END TRUCKS
6.52[165.61]
REF.
3.35[85.09]
REF.2.60
[66.04]REF.
7.63[193.80]
REF.
2.50[63.50]
REF.
3.50[88.90]
REF.
3.50[88.90]]
REF.BOTTOM OFRAIL
41/64DIA. REF.
SAFETY CABLE
2411D CES binder.qxd 9/13/01 11:06 AM Page 28
Page 19
Single End Truck Assembly #860490 Capacity…1500 Lbs.END TRUCKS
7.63[193.80]
REF.
12.73[323.34]
REF.
2.53 [64.26]REF.
2.00
[50.80]
6.19[157.23]
REF.
SAFETY CABLEHOLES
SAFETY CABLE
2411D CES binder.qxd 9/13/01 11:06 AM Page 29
Page 20
Dual End Truck Hanger Assembly #8606590 Capacity…3000 Lbs.END TRUCKS
7.75[196.85]
REF.
12.86[326.64]
REF.
4.94[125.48]
REF.
12.83 [325.88]REF.
25.00 [635.00]REF.
12.50[317.50]
REF.
SAFETY CABLE
2411D CES binder.qxd 9/13/01 11:06 AM Page 30
Page 21
Rigid Single End Truck Assembly #860950 Capacity…1500 Lbs.END TRUCKS
2.49 [63.25]REF.
12.70[322.58]
REF.
7.59[192.79]
REF.
3.50[88.90]
REF.12.38 [314.45]
REF.6.19 [157.23]
6.00[406.40]
REF.
SAFETY CABLE
SAFETY CABLEHOLES
2411D CES binder.qxd 9/13/01 11:06 AM Page 31
Page 22
Rigid Dual End Truck Assembly #860570 Capacity…3000 Lbs.END TRUCKS
SAFETY CABLE
7.59[192.79]
REF.
7.75[196.85]
REF.
12.70[322.80]
REF.
4.94REF.
[125.476]
18.83 [478.28]
25.00 [635.00]REF.
12.50 [317.50]REF. 7.46 [189.784]
REF.
2411D CES binder.qxd 9/13/01 11:06 AM Page 32
Page 23
12” Splice Kit #860640SPLICE KIT
12.00 [304.80]REF.
6.00 [152.40]REF.
END
OFRA
ILS
2411D CES binder.qxd 9/13/01 11:06 AM Page 33
Page 24
Stack Plate Assembly #860540RAIL STACK KIT
9.79[279.67]
REF.
6.04[153.42]
REF.
2.00[50.80]
TYP.
2411D CES binder.qxd 9/13/01 11:06 AM Page 34
Page 25
End Stop Assembly #860480END STOPS
1.72[43.69]
REF.
.75[19.05]
REF.
.75[19.05]
REF.
2411D CES binder.qxd 9/13/01 11:06 AM Page 35
Page 26
Redundant End Stop Assembly #860760REDUNDANT END STOPS
.75[19.05]
TYP.
.75[19.05]
TYP.
.75[19.05]
TYP.
.37[9.40]TYP.
2.83 [71.88]REF.
2.2469[57.07]
REF.
4.87 [123.70]REF.
2411D CES binder.qxd 9/13/01 11:06 AM Page 36
Page 27
3.50 [88.90]REF.
5.51[139.95]
REF.4.00[101.60]
REF.
.40[10.16]
REF.
Adjustable Mid-Rail Stop Assembly #860130ADJUSTABLE END STOPS
2411D CES binder.qxd 9/13/01 11:06 AM Page 37
Page 28
5.31 [134.87]REF.
1/2” [12.70]PIPE TAPPED AIR LINE
TAG LINE
1.06[26.92]
REF.
1.50[38.10]
REF.
2.63[66.80]
REF.
2.00[50.80]
REF.
Festooning Bracket Assembly #860970MISCELLANEOUS
2411D CES binder.qxd 9/13/01 11:06 AM Page 38
Page 29
Safety Cable Assembly #860660MISCELLANEOUS
SADDLES MUST BE ON LIVEEND OF CABLE
2411D CES binder.qxd 9/13/01 11:06 AM Page 39
Page 30
Telescoping Rail Hanger Assembly #861150MISCELLANEOUS
3.50 [88.90]REF.
1.75 [44.45]REF.
2.50 [63.50]
REF.
41/64 REF.
SAFETY CABLE
1.19[30.23]
REF.
7.40[187.96]
REF.6.29
[159.77]REF.
2.30[58.42]
REF.
2411D CES binder.qxd 9/13/01 11:06 AM Page 40
Page 31
Single Telescoping Rail End Truck #861160MISCELLANEOUS
5.31 [134.87]REF.
SAFETY CABLEHOLES
2.500[63.50]
1.25[31.75]
7.40[187.96]
REF.
2.30 [58.42]REF.
SUPPLIED WITH#861150
2411D CES binder.qxd 9/13/01 11:06 AM Page 41
Page 32
Part Number Description841510 Adjustable Rotation Stops841500 Rotational Air Brake and Switch730010 Trolley820200 Shelf/Tray800020 Control Box Mounts
Additional Booms820210 4' Assembly820220 6' Assembly820230 8' Assembly
220 Degree RotationLIGHT DUTY JIB CRANES
Available Options
NOTE: Boom assemblies are made with 5" [127.00 mm] profile Aluminum Enclosed Track. Tie bar assembliesare not included nor are they part of the design. All materials except post assembly & shelf/tray are aluminum6061-T6. Reach length is from center of column to end of boom.
AVAILABLE OPTIONS
Part Number Reach Length Column Length Max. Capacity820110 4 Feet 8 Feet 225 Lbs.820120 4 Feet 10 Feet 200 Lbs.820130 4 Feet 12 Feet 175 Lbs.820140 6 Feet 8 Feet 175 Lbs.820150 6 Feet 10 Feet 150 Lbs.820160 6 Feet 12 Feet 125 Lbs.820170 8 Feet 8 Feet 125 Lbs.820180 8 Feet 10 Feet 100 Lbs.820190 8 Feet 12 Feet 75 Lbs.
AVAILABLE MODELS
AIR BRAKE ASSEMBLY ADJ. STOPS SHELF/TRAY
2411D CES binder.qxd 9/13/01 11:06 AM Page 42
Page 33
Part Number Description841510 Adjustable Rotation Stops730010 Trolley
Additional Booms820210 4' Assembly820220 6' Assembly820230 8' Assembly
Available Options
NOTE: Boom assemblies are made with 5" [127.00 mm] profile Aluminum Enclosed Track. Tie bar assembliesare not included nor are they part of the design. All materials except post assembly & shelf/tray are aluminum6061-T6. Reach length is from center of column to end of boom.
AVAILABLE OPTIONS
Part Number Reach Length Column Length Max. Capacity820110 4 Feet 8 Feet 225 Lbs.820120 4 Feet 10 Feet 200 Lbs.820130 4 Feet 12 Feet 175 Lbs.820140 6 Feet 8 Feet 175 Lbs.820150 6 Feet 10 Feet 150 Lbs.820160 6 Feet 12 Feet 125 Lbs.820170 8 Feet 8 Feet 125 Lbs.820180 8 Feet 10 Feet 100 Lbs.820190 8 Feet 12 Feet 75 Lbs.
2411D CES binder.qxd 9/13/01 11:06 AM Page 42
360 Degree Rotation
LIGHT DUTY JIB CRANES
ADJ. STOPS
Part Number Reach Length Under Clearance Overall Height Capacity Lbs. Weight Lbs.821001 4 Feet 10 Feet 162 Inches[4,114.80] 3000 690821002 4 Feet 12 Feet 186 Inches[4,724.40] 3000 750821003 4 Feet 14 Feet 210 Inches[5,334.00] 2350 810821004 6 Feet 10 Feet 162 Inches[4,114.80] 2550 705821005 6 Feet 12 Feet 186 Inches[4,724.40] 2000 760821006 6 Feet 14 Feet 210 Inches[5,334.00] 1525 820821007 8 Feet 10 Feet 162 Inches[4,114.80] 1875 720821008 8 Feet 12 Feet 186 Inches[4,724.40] 1450 775821009 8 Feet 14 Feet 210 Inches[5,334.00] 1100 830821010 10 Feet 10 Feet 162 Inches[4,114.80] 1450 730821011 10 Feet 12 Feet 186 Inches[4,724.40] 1125 790821012 10 Feet 14 Feet 210 Inches[5,334.00] 875 845821013 12 Feet 8 Feet 162 Inches[4,114.80] 1175 745821014 12 Feet 10 Feet 186 Inches[4,724.40] 900 800821015 12 Feet 12 Feet 210 Inches[5,334.00] 650 860821016 14 Feet 8 Feet 162 Inches[4,114.80] 465 755821017 14 Feet 10 Feet 186 Inches[4,724.40] 465 815821018 14 Feet 12 Feet 210 Inches[5,334.00] 465 870821019 16 Feet 10 Feet 162 Inches[4,114.80] 400 770821020 16 Feet 12 Feet 186 Inches[4,724.40] 400 825821021 16 Feet 14 Feet 210 Inches[5,334.00] 400 885821022 18 Feet 10 Feet 162 Inches[4,114.80] 300 780821023 18 Feet 12 Feet 186 Inches[4,724.40] 300 840821024 18 Feet 14 Feet 210 Inches[5,334.00] 300 900821025 20 Feet 10 Feet 162 Inches[4,114.80] 250 795821026 20 Feet 12 Feet 186 Inches[4,724.40] 250 850821027 20 Feet 14 Feet 210 Inches[5,334.00] 250 910
AVAILABLE MODELS
360 Degree RotationROBO JIB™
OVERALLHEIGHT
UNDER CLEARANCE
HEIGHT
REACHLENGTH24.00
[609.60]
20.00 B.C.[508.00]
7/8 DIA. THRU
24.00[609.60]
12.00[304.80]
12.00
[304.80]
BASE PLATE
3/8 N.P.T.AIR INLET
2411D CES binder.qxd 9/13/01 11:06 AM Page 43
Page 35
Part Number Reach Length Under Clearance Overall Height Capacity Lbs. Weight Lbs.821043 14 Feet 8 Feet 162 Inches[4,114.80] 900 829821044 14 Feet 10 Feet 186 Inches[4,724.40] 650 889821045 14 Feet 12 Feet 210 Inches[5,334.00] 465 944821046 16 Feet 10 Feet 162 Inches[4,114.80] 725 867821047 16 Feet 12 Feet 186 Inches[4,724.40] 525 922821048 16 Feet 14 Feet 210 Inches[5,334.00] 400 982821049 18 Feet 10 Feet 162 Inches[4,114.80] 585 983821050 18 Feet 12 Feet 186 Inches[4,724.40] 400 1043821051 18 Feet 14 Feet 210 Inches[5,334.00] 300 1103821052 20 Feet 10 Feet 162 Inches[4,114.80] 475 900821053 20 Feet 12 Feet 186 Inches[4,724.40] 310 955821054 20 Feet 14 Feet 210 Inches[5,334.00] 250 1015
AVAILABLE MODELS
With Stack RailROBO JIB™
OVERALLHEIGHT
UNDER CLEARANCE
HEIGHT
REACHLENGTH
24.00 [609.60]
7/8 DIA. THRU
24.00[609.60]
[304.80]
12.00
BASE PLATE
3/8 N.P.T.AIR INLET 20.00 B.C.
[508.00]12.00
[304.80]
2411D CES binder.qxd 9/20/01 3:14 PM Page 44
Page 36
Linear Track Systems
Consult Factory For Applications
CES Linear Track System can be configured in several different
orientations. Ceiling-, wall-, pit- orfloor-mount, vertical or horizontal.
cescolor.qxd 9/11/01 3:27 PM Page 9
136
Page 37
Vertical Linear TrackApplication
Vertical Balancer Arm
cescolor.qxd 9/11/01 3:27 PM Page 10
Page 38