Upload
ngonhu
View
216
Download
0
Embed Size (px)
Citation preview
Nas próximas páginas você encontrará uma completa linha de mangotes marítimos flutuantes e submarinos desenvolvidos e aprimorados continuamente por mais de 33 anos de atuação da Flexomarine no mercado de transferência da produção de petróleo em alto-mar. Com know-how e tecnologia próprios e um quadro técnico-industrial de primeira linha, a Flexomarine consolidou-se num mercado altamente competitivo e com exigência de performance crescente, principalmente nas novas fronteiras de produção de petróleo em águas ultra profundas, onde as condições climáticas e marítimas expõem os mangotes a severas condições de operação. Utilizando-se de modernas técnicas de Pesquisa e Desenvolvimento de novos materiais e técnicas construtivas dos mangotes, a Flexomarine atende requisitos individuais e característicos sempre que diferentes condições de operação são especificadas pelo cliente em vista da locação e configuração do ambiente em que o mangote vai operar. A Flexomarine encontra-se apta a atender suas exigências! Consulte-nos!
Mangotes marítimos de alta performance em conformidade com a GMPHOM 2009
In the following pages you will find a complete line of marine floating and submarine hoses developed and continuously improved for over 33 years of Flexomarine’s experience in the offshore oil production and transfer.
With our own know-how and technology and a highly qualified and experienced staff, Flexomarine has consolidated into a highly competitive market, mainly at the new frontiers of ultra deep water offshore oil exploration and production, where extreme climate and maritime conditions bring the hoses into severe application conditions. Modern Research & Development techniques associated with best practices for hose construction allow Flexomarine to meet and exceed customer requirements at different operating conditions, according to location and ambient that hoses will operate. Flexomarine is capable of meeting your requirements! Contact us!
En las siguientes páginas Usted encontrará una completa línea de mangueras marítimas flotantes y submarinas, desarrolladas y mejoradas continuamente por mas de 33 años de experiencia de Flexomarine en el mercado de transferencia de crudos en operaciones offshore.
Con know-how y tecnología próprios y con un cuadro técnico-industrial de primera línea, Flexomarine está en una posición consolidada en un mercado altamente competitivo y con demanda de performance creciente, especialmente en las nuevas fronteras de producción de crudos en aguas ultra profundas, donde las condiciones climáticas y marítimas van a exponer las mangueras a duras condiciones de funcionamiento.
Utilizándose de técnicas modernas de pesquisa y desarrollo de nuevos materiales y construcción de las mangueras, Flexomarine atiende las necesidades y características individuales cuando las condiciones de operación son especificadas por los clientes cuanto a la ubicación y la configuración de aplicación de las mangueras marítimas. Flexomarine es capaz de satisfacer sus necesidades! Contacte con nosotros!
High performance GMPHOM 2009marine hoses
Mangueras marítimas de alta performance en conformidadcon GMPHOM 2009
We are very proud to announce that Flexomarine was awarded by Petrobras as 2nd Best Supplier in Large Purchases Category for Campos Basin, the biggest and most important Operational Unit of Petrobras, in a universe of 5700 registered suppliers.
PETROBRAS AWARDED
SUMMARY
FLEXOMARINE HOSES PRODUCT RANGE
RT REINFORCED SINGLE CARCASS 15 bar 1000 Series
RT REINFORCED SINGLE CARCASS 19 bar 1000 Series
RT REINFORCED SINGLE CARCASS 21 bar 1000 Series
RT DOUBLE CARCASS 15 bar 7000 Series
RT DOUBLE CARCASS 19 bar 7000 Series
RT DOUBLE CARCASS 21 bar 7000 Series
SINGLE CARCASS 15 bar 1000 Series
SINGLE CARCASS 19 bar 1000 Series
SINGLE CARCASS 21 bar 1000 Series
DOUBLE CARCASS 15 bar 7000 Series
DOUBLE CARCASS 19 bar 7000 Series
DOUBLE CARCASS 21 bar 7000 Series
07
09
21
33
45
57
69
81
95
109
123
137
151
REELING TYPE
MONOBUOY TYPE
Other applications under request
1000
Seri
es
15 b
ar16
00
1610
1620
1630
1640
1650
1652
1621
1622
1631
1632
1635
19 b
ar17
00
1710
1720
1730
1740
1750
1752
1721
1722
1731
1732
1735
21
bar
1800
1810
1820
1830
1840
1850
1852
1821
1822
1831
1832
1835
7000
Seri
es
15 b
ar76
00
7610
7620
7630
7640
7650
7652
7621
7622
7631
7632
7635
19 b
ar770
0
7710
772
0
773
0
774
0
775
0
775
2
772
1
772
2
773
1
773
2
773
5
21
bar
7800
7810
7820
7830
7840
7850
7852
7821
7822
7831
7832
7835
SU
FFIX
Flo
atin
gS
ubm
arin
eR
eeling
Type
Cat
enar
yExtr
aB
uoya
ncy
Hig
hFle
xB
uoya
ncy
Contr
ol
Both
Ends
Rein
forc
ed
or
Fully
Rein
forc
ed
Poly
ure
than
eC
over
FS
RT
CEB
HF
BC
FR
PU
1670
1770
1870
7670
7770
7870
Dra
win
gs
Fle
xom
arin
e inte
gra
l fu
ll-fl
oat
ing
tanke
r ra
il hose
(Jum
bo t
ype)
Fle
xom
arin
e inte
gra
l buoya
ncy
contr
ol hose
. D
esi
gned f
or
buoy
or
Reelin
g s
yste
ms
Fle
xom
arin
e (
firs
t off
the R
eel)
or
hal
f fl
oat
ing h
ose
wit
h o
ne r
ein
forc
ed
end (
firs
t off
the b
uoy)
Buoy a
nd R
eeling S
yst
em
Res
earc
h,
Dev
elopm
ent
and
Qual
ity A
ssura
nce
.FLEXOMARINE HOSES PRODUCT RANGE
REELING HOSES TYPE
In order to prevent contact of the hose flanges with the reel, all Flexomarine reeling hoses type have a rubber ring
(patented PI 1104814-0) at each end.
9RT REINFORCED SINGLE CARCASS HOSE
Flexomarine half floating hose with one reinforced end (first off FPSO)
Flexomarine integral full-floating hose for mainline
Flexomarine integral full-floating hose with built-in reducer
Flexomarine integral full-floating hose for tail
Flexomarine integral full-floating tanker end hose (Jumbo)
Flexomarine integral buoyancy control hoseDesigned upon request
Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).
Flexomarine standard mainline submarine hose
Flexomarine submarine hose for tanker end
1610F RT
1620F RT
1630F RT
1640F RT
1652F RT
1670BC RT
1631S RT
1632S RT
1635S RT
RT REINFORCED SINGLE CARCASS 15 bar 1000 Series Reeling Hose
RT SINGLE CARCASS
15 bar 1000 Series
PANTONE 255C: KNIFE
1 (FRONT)
D1 D2 D3 D4
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
800
960
1090
730
890
1020
600
760
890
620
780
910
15462214
20973183
27534476
17692555
23953672
31455171
19792875
26754131
35125822
End Body Body End
Single Carcass Hose FLEXOMARINE One End Reinforced to be used in theFPSO Offloading connection
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Continuous or as requested
1610 F RT RT REINFORCED SINGLE CARCASS FLOATING HOSE
Type 1610 F RT First Off FPSO HOSE
GMPHOM 2009
3.6600(24")
1220 1200 1040 106035896096
41107058
45987959
RT REINFORCED SINGLE CARCASS 15 bar 1000 Series Reeling Hose
D1D2 D2
Single Carcass Hose FLEXOMARINE Mainline to be used as the main floating hose in the string
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
600
760
890
620
780
910
13372005
19052991
25694292
15212306
21683444
29264952
16932589
24143869
32615571
Body End
1620 F RT
Type 1620 F RT Mainline Hose
GMPHOM 2009
3.6600(24")
1040 106033525859
38296777
42767637
12
Reeling Hose
RT REINFORCED SINGLE CARCASS FLOATING HOSE
RT REINFORCED SINGLE CARCASS 15 bar 1000 Series
D3D1 D2
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)
400/30016"/12")
500/400(20"/16")
1.8
2.4
780
910
600
760
620
780
13432011
19393025
15282314
22073484
17012597
24583914
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
Type 1630 F RT Reducer Hose
Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect larger mainline hose to smaller tail hose
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
GMPHOM 2009
1630 F RT
600/500(24"/20")
3.01060 900 92026014324
29644990
33035613
13
Reeling Hose
RT REINFORCED SINGLE CARCASS FLOATING HOSE
RT REINFORCED SINGLE CARCASS 15 bar 1000 Series
D1D2 D2
Type 1640 F RT Tail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
600
760
890
620
780
910
13972065
19243010
25594282
15942379
21913468
29174943
17782674
24423898
32525562
Body End
Single Carcass Hose FLEXOMARINE Tail for use to connect the end connection hose and the main floating string
This hose has flexiblility enouth to support seawater conditions during offloading
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
GMPHOM 2009
1640 F RT
3.6600(24")
1040 106035776084
39756923
43727733
14
Reeling Hose
RT REINFORCED SINGLE CARCASS FLOATING HOSE
RT REINFORCED SINGLE CARCASS 15 bar 1000 Series
Type 1652 F RT Tanker End (Jumbo) Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
810
1000
1080
1020
1380
1470
1180
1430
1520
16872355
23173402
30854809
19082694
26183895
34865512
21143010
29004356
38596169
D3
GMPHOM 2009
12" = 100 kN 16" = 150 kN 20" = 200 kN
Single Carcass Hose FLEXOMARINE Tanker End for use to connect the ship's manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
In the hose fittings liftings lugs can be welded to attach pick up device
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton
Electrical Continuity: Discontinuous or as requested
1652 F RT
2.4600(24")
1230 1555 160040706577
45237471
49758336
15
Reeling Hose
RT REINFORCED SINGLE CARCASS FLOATING HOSE
RT REINFORCED SINGLE CARCASS 15 bar 1000 Series
Type 1670 BC RT Buoyancy Control Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
500
610
710
620
780
910
13001968
18652951
25004223
14782263
21203397
28444870
16442540
23603815
31675477
Body End
Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
D1D2D2
GMPHOM 2009
1670 BC RT
3.6600(24")
840 106032845791
37486696
41837544
16
Reeling Hose
RT REINFORCED SINGLE CARCASS FLOATING HOSE
RT REINFORCED SINGLE CARCASS 15 bar 1000 Series
D3D1 D2 D4
Type 1631 S RT One Reinforced End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
660
760
860
455
555
655
430
540
640
650
750
850
1358476
1842698
2452952
1551536
2100783
27971070
1733593
2342862
31211181
D3 D4
Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose to be used on FPSO connections
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
1631 S RT
2.4600(24")
910 795 755 89032621304
37311473
41711631
17
Reeling Hose
RT REINFORCED SINGLE CARCASS SUBMARINE HOSE
RT REINFORCED SINGLE CARCASS 15 bar 1000 Series
D1 D2D2
Type 1632 S RT Mainline Hose
Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to be connected between reel and the Tanker on reeling systems
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
430
540
640
650
750
850
-
-
-
-
-
-
1251429
1716634
2301865
1420476
1944700
2610957
1579520
2158762
28991042
Body End
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
1632 S RT
2.4600(24")
755 890 - -30821183
35081315
39081439
18
Reeling Hose
RT REINFORCED SINGLE CARCASS SUBMARINE HOSE
RT REINFORCED SINGLE CARCASS 15 bar 1000 Series
D1 D2D2
Type 1635 S RT Tanker End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Submerged Weight Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
430
540
640
650
750
850
1261439
1727645
2315878
1430485
1955711
2624969
1588529
2170772
29131055
BodyEnd
GMPHOM 2009
12" = 100 kN 16" = 150 kN 20" = 200 kN
Single Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
In the hose fittings are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
1635 S RT
2.4600(24")
755 89030981188
35261321
39271446
19
Reeling Hose
RT REINFORCED SINGLE CARCASS SUBMARINE HOSE
RT REINFORCED SINGLE CARCASS 15 bar 1000 Series
1710F RT
1720F RT
1730F RT
1740F RT
1752F RT
1770BC RT
1731S RT
1732S RT
1735S RT
RT REINFORCED SINGLE CARCASS HOSE
Flexomarine half floating hose with one reinforced end (first off FPSO)
Flexomarine integral full-floating hose for mainline
Flexomarine integral full-floating hose with built-in reducer
Flexomarine integral full-floating hose for tail
Flexomarine integral full-floating tanker end hose (Jumbo)
Flexomarine integral buoyancy control hoseDesigned upon request
Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).
Flexomarine standard mainline submarine hose
Flexomarine submarine hose for tanker end
SINGLE CARCASS 19 bar
1000 Series RT SINGLE CAR
CASS 19 bar 1000 Series
PANTONE 255C: KNIFE
2 (FRONT)
RT REINFORCED SINGLE CARCASS 19 bar 1000 Series Reeling Hose
D1 D2 D3 D4
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
800
960
1090
730
890
1020
630
790
920
650
810
940
17972465
24373523
31584881
20562842
27854061
36075633
22993195
31104566
40286338
End Body Body End
Single Carcass Hose FLEXOMARINE One End Reinforced to be used in theFPSO Offloading connection
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Continuous or as requested
1710 F RT RT REINFORCED SINGLE CARCASS FLOATING HOSE
Type 1710 F RT First Off FPSO HOSE
GMPHOM 2009
3.6600(24")
1220 1200 1060 108041676674
47717719
53388699
23
Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series
D1D2 D2
Single Carcass Hose FLEXOMARINE Mainline to be used as the main floating hose in the string
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
630
790
920
650
810
940
14312100
20843170
27544477
16222407
23643640
31265152
18002696
26264082
34755785
Body End
1720 F RT
Type 1720 F RT Mainline Hose
GMPHOM 2009
3.6600(24")
1060 108036796186
41927140
46738034
24
Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series
RT REINFORCED SINGLE CARCASS FLOATING HOSE
D3D1 D2
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)
400/300(16"/12")
500/400(20"/16")
1.8
2.4
810
940
630
790
650
810
14392107
20943180
16302415
23763652
18092705
26394095
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
Type 1730 F RT Reducer Hose
Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect larger mainline hose to smaller tail hose
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
GMPHOM 2009
1730 F RT
600/500(24"/20")
3.01080 920 94027675275
31416089
34926853
25
Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series
RT REINFORCED SINGLE CARCASS FLOATING HOSE
D1D2 D2
Type 1740 F RT Tail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
630
790
920
650
810
940
15622230
21603246
28224545
17772562
24563732
32085234
19782874
27334188
35715881
Body End
Single Carcass Hose FLEXOMARINE Tail for use to connect end connection hose and the main floating string
This hose has flexiblility enouth to support seawater conditions during offloading
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
GMPHOM 2009
1740 F RT
3.6600(24")
1060 108036756182
41887136
46698030
26
Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series
RT REINFORCED SINGLE CARCASS FLOATING HOSE
Type 1752 F RT Tanker End (Jumbo) Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
810
1000
1080
1020
1380
1470
1180
1430
1520
18772545
25903676
33895113
21192904
29244201
38235849
23443240
32354691
42276537
D3
GMPHOM 2009
12" = 100 kN 16" = 150 kN 20" = 200 kN
Single Carcass Hose FLEXOMARINE Tanker End for use to connect the ship's manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
In the hose fittings liftings lugs can be welded to attach pick up device
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton
Electrical Continuity: Discontinuous or as requested
1752 F RT
2.4600(24")
1230 1550 160042346741
47057652
51758536
27
Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series
RT REINFORCED SINGLE CARCASS FLOATING HOSE
Type 1770 BC RT Buoyancy Control Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
510
620
720
650
810
940
13952063
20203106
26654388
15792365
22883565
30215047
17512647
25403996
33555665
Body End
Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
D1D2D2
GMPHOM 2009
1770 BC RT
3.6600(24")
850 108035836090
40787026
45427903
28
Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series
RT REINFORCED SINGLE CARCASS FLOATING HOSE
D3D1 D2 D4
Type 1731 S RT One Reinforced End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
660
760
860
460
565
665
440
550
650
650
750
850
1542595
2091840
27191122
1762670
2385942
31011259
1968740
26611038
34601388
D3 D4
Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose to be used on FPSO connections
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
1731 S RT
2.4600(24")
910 795 765 89036651520
41921713
46871893
29
Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series
RT REINFORCED SINGLE CARCASS SUBMARINE HOSE
D1 D2D2
Type 1732 S RT Mainline Hose
Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between reel and Tanker on reeling systems
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
440
550
650
650
750
850
-
-
-
-
-
-
1369489
1886707
2477955
1549536
2131772
28011044
1718579
2362834
31061128
Body End
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
1732 S RT
2.4600(24")
765 890 - -33771302
38351433
42651556
30
Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series
RT REINFORCED SINGLE CARCASS SUBMARINE HOSE
Type 1735 S RT Tanker End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Submerged Weight Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
440
550
650
650
750
850
1378498
1896717
2490967
1558544
2142783
28141057
1726588
2372844
31181141
BodyEnd
GMPHOM 2009
12" = 100 kN 16" = 150 kN 20" = 200 kN
Single Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
In the hose fittings are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
1735 S RT
2.4600(24")
765 89034441315
39121448
43501572
D1 D2D2
31
Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series
RT REINFORCED SINGLE CARCASS SUBMARINE HOSE
RT REINFORCED SINGLE CARCASS HOSE
Flexomarine half floating hose with one reinforced end (first off FPSO)
Flexomarine integral full-floating hose for mainline
Flexomarine integral full-floating hose with built-in reducer
Flexomarine integral full-floating hose for tail
Flexomarine integral full-floating tanker end hose (Jumbo)
Flexomarine integral buoyancy control hoseDesigned upon request
Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).
Flexomarine standard mainline submarine hose
Flexomarine submarine hose for tanker end
RT SINGLE CARCASS 21 bar
1000 Series
PANTONE 255C: KNIFE
3 (FRONT)
Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series
1810F RT
1820F RT
1830F RT
1840F RT
1852F RT
1870BC RT
1831S RT
1832S RT
1835S RT
D1 D2 D3 D4
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
800
960
1090
730
890
1020
630
790
920
650
810
940
18532521
25133599
32564979
21202905
28714147
37195745
23703266
32064662
41526463
Single Carcass Hose FLEXOMARINE One End Reinforced to be used in the FPSO Offloading connection
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Continuous or as requested
1810 F RT
Type 1810 F RT First Off FPSO HOSE
GMPHOM 2009
3.6600(24")
1220 1200 1060 108042966803
49197867
55038864
35RT REINFORCED SINGLE CARCASS FLOATING HOSE
Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series
D1D2 D2
Single Carcass Hose FLEXOMARINE Mainline to be used as the main floating hose in the string
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
630
790
920
650
810
940
14762144
21483234
28394562
16722457
24373714
32225249
18562751
27074163
35825892
Body End
1820 F RT
Type 1820 F RT Mainline Hose
GMPHOM 2009
3.6600(24")
1060 108037936300
43227270
48188179
36 RT REINFORCED SINGLE CARCASS FLOATING HOSE
Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series
D3D1 D2
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)
400/300(16"/12")
500/400(20"/16")
1.8
2.4
810
940
630
790
650
810
14832151
21593245
16802466
24493726
18652761
27214177
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
Type 1830 F RT Reducer Hose
Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect larger mainline hose to smaller tail hose
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
GMPHOM 2009
1830 F RT
600/500(24"/20")
3.01080 920 94028535360
32396186
36006961
37RT REINFORCED SINGLE CARCASS FLOATING HOSE
Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series
D1D2 D2
Type 1840 F RT Tail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
630
790
920
650
810
940
16102278
22273313
29094632
18322617
25313808
33075334
20392935
28174273
36815991
Body End
Single Carcass Hose FLEXOMARINE Tail for use to connect the end connection hose and the main floating string
This hose has flexiblility enouth to support seawater conditions during offloading
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
GMPHOM 2009
1840 F RT
3.6600(24")
1060 108037896296
43187266
48138174
38 RT REINFORCED SINGLE CARCASS FLOATING HOSE
Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series
Type 1852 F RT Tanker End (Jumbo) Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
810
1000
1080
1020
1380
1470
1180
1430
1520
19352603
26713756
34945217
21842970
30144291
39415967
24173312
33354791
43586668
D3
GMPHOM 2009
12" = 100 kN 16" = 150 kN 20" = 200 kN
Single Carcass Hose FLEXOMARINE Tanker end for use to connect the ship's manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
In the hose fittings liftings lugs can be welded to attach pick up device
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton
Electrical Continuity: Discontinuous or as requested
1852 F RT
2.4600(24")
1230 1550 160043656872
48507798
53358696
39RT REINFORCED SINGLE CARCASS FLOATING HOSE
Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series
Type 1870 BC RT Buoyancy Control Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
510
620
720
650
810
940
14382107
20823168
27474471
16282414
23593636
31145141
18062701
26194074
34595769
Body End
D1D2D2
GMPHOM 2009
1870 BC RT
Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
3.6600(24")
850 108036936201
42047152
46828044
40 RT REINFORCED SINGLE CARCASS FLOATING HOSE
Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series
D3D1 D2 D4
Type 1831 S RT One Reinforced End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
660
760
860
460
565
665
440
550
650
650
750
850
1550598
2101844
27321128
1771673
2397947
31171266
1978744
26741043
34771395
D3 D4
Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose to be used on FPSO connections
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
1831 S RT
2.4600(24")
910 795 765 89036831528
42131721
47101903
41RT REINFORCED SINGLE CARCASS SUBMARINE HOSE
Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series
D1 D2D2
Type 1832 S RT Mainline Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
440
550
650
650
750
850
-
-
-
-
-
-
1376492
1895710
2489960
1557538
2142776
28151050
1726582
2374838
31211134
Body End
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
1832 S RT
Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to be connected between reel and the Tanker on reeling systems
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
2.4600(24")
765 890 - -33941309
38541440
42861564
42 RT REINFORCED SINGLE CARCASS SUBMARINE HOSE
Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series
D1 D2D2
Type 1835 S RT Tanker End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Submerged Weight Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
440
550
650
650
750
850
1385501
1906721
2502972
1566547
2153787
28281062
1735591
2384848
31341146
BodyEnd
GMPHOM 2009
12" = 100 kN 16" = 150 kN 20" = 200 kN
Single Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
In the hose fittings are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
1835 S RT
2.4600(24")
765 89034611322
39311455
43721580
43RT REINFORCED SINGLE CARCASS SUBMARINE HOSE
Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series
7610F RT
7620F RT
7630F RT
7640F RT
7652F RT
7670BC RT
7631S RT
7632S RT
7635S RT
RT DOUBLE CARCASS HOSE
RT DOUBLE CARCASS 15 bar 7000 Series
Flexomarine half floating hose with one reinforced end (first off FPSO)
Flexomarine integral full-floating hose for mainline
Flexomarine integral full-floating hose with built-in reducer
Flexomarine integral full-floating hose for tail
Flexomarine integral full-floating tanker end hose (Jumbo)
Flexomarine integral buoyancy control hoseDesigned upon request
Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).
Flexomarine standard mainline submarine hose
Flexomarine submarine hose for tanker end
RT DOU
BLE CAR
CASS 15 bar 7000 Series
PANTONE 255C: KNIFE
4 (FRONT)
Reeling Hose
D1 D2 D3 D4
RT DOUBLE CARCASS 15 bar 7000 Series
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
800
950
1170
780
930
1150
680
830
990
700
850
1020
21752843
28943980
36535377
24683253
32794556
41516177
27423638
36405095
46176928
End Body Body End
7610 F RT RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Type 7610 F RT First Off FPSO HOSE
GMPHOM 2009
Double Carcass Hose FLEXOMARINE SAFE One Reinforced End to be used in the or FPSO Offloading connection
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including teh weight of ancillary equipment or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
3.6600(24")
1300 1270 1120 114049077414
55948542
62349599
FLEXOMARINE SAFE
47
Reeling Hose
D1D2 D2
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
680
830
970
700
850
995
19362604
26693755
34145137
21832969
30134290
38695895
21453311
33354791
42956605
Body End
7620 F RT
Type 7620 F RT Mainline Hose
GMPHOM 2009
3.6600(24")
1160 116045987105
52308178
58239184
Double Carcass Hose FLEXOMARINE SAFE Mainline to be used as the main floating hose in the string
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
RT DOUBLE CARCASS 15 bar 7000 Series
FLEXOMARINE SAFE
48
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
D3D1 D2
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)
400/300(16"/12")
500/400(20"/16")
1.8
2.4
850
995
680
830
700
850
19452613
26823768
21942980
30284305
24273323
33524808
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
Type 7630 F RT Reducer Hose
GMPHOM 2009
7630 F RT
600/500(24"/20")
3.01140 970 99534315154
38885914
43166627
Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect larger mainline hose to smaller tail hose
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
RT DOUBLE CARCASS 15 bar 7000 Series
FLEXOMARINE SAFE
49
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
D1D2 D2
Type 7640 F RT Tail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
680
830
970
700
850
995
20282696
26993785
34285152
22953081
30524329
38905916
25463442
33834839
43226632
Body End
GMPHOM 2009
7640 F RT
Double Carcass Hose FLEXOMARINE SAFE Tail for use to connectthe end connection hose and the main floating string
This hose has flexiblility enouth to support seawater conditions during offloading
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
3.6600(24")
1160 116046447151
52838231
58829243
RT DOUBLE CARCASS 15 bar 7000 Series
FLEXOMARINE SAFE
50
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Type 7652 F RT Tanker End (Jumbo) Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
880
1070
1160
1200
1450
1550
1250
1500
1600
23983066
31934279
40595783
26963482
35884865
45726598
29743870
39565412
50497359
D3
GMPHOM 2009
7652 F RT
Double Carcass Hose FLEXOMARINE SAFE Tanker End for use to connect the ship's manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
In the hose fittings liftings lugs can be welded to attach pick up device
Each lug are tested to support Safe Working Loads as follow:
12"= 100 kN 16"= 150 kN 20"= 200 kN
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
2.4600(24")
1300 1600 163048217328
53578305
58939254
RT DOUBLE CARCASS 15 bar 7000 Series
FLEXOMARINE SAFE
51
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Type 7670 BC RT Buoyancy Control Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
510
620
730
700
850
990
18822550
25873673
32995022
21202906
29164193
37315757
23433239
32244680
41366447
Body End
D1D2D2
GMPHOM 2009
7670 BC RT
Double Carcass Hose FLEXOMARINE SAFE buoyancy control for use as the second and the third hose in the string
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
3.6600(24")
930 114044816988
50907116
56617971
RT DOUBLE CARCASS 15 bar 7000 Series
FLEXOMARINE SAFE
52
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
D3D1 D2 D4
Type 7631 S RT One Reinforced End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
710
810
920
505
595
710
480
570
685
700
800
900
1890595
2494854
31641100
2140638
2819917
35871190
2374679
3123976
39841275
D3 D4
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
7631 S RT
Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose to be used on FPSO connections
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
2.4600(24")
1070 840 820 105043501527
49511663
55141791
RT DOUBLE CARCASS 15 bar 7000 Series
FLEXOMARINE SAFE
53
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
D1 D2D2
Type 7632 S RT Mainline Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
480
570
685
700
800
900
-
-
-
-
-
-
1784568
2368813
30141036
2009602
2663862
34031105
2220635
2940909
37671171
Body End
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
7632 S RT
Double Carcass Hose FLEXOMARINE SAFE Mainline Submarine Hose for use as the main submarine hose in the string to be connected between reel and the Tanker on reeling systems
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
2.4600(24")
820 1050 - -41671432
47261539
52491639
RT DOUBLE CARCASS 15 bar 7000 Series
FLEXOMARINE SAFE
54
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
D1 D2D2
Type 7635 S RT Tanker End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Submerged Weight Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
480
570
685
700
800
900
1793577
2379823
30271048
2018611
2674873
34161118
2229644
2951919
37801183
BodyEnd
GMPHOM 2009
12" = 100 kN 16" = 150 kN 20" = 200 kN
Double Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
7635 S RT
2.4600(24")
820 105041881441
47491552
52751640
RT DOUBLE CARCASS 15 bar 7000 Series
FLEXOMARINE SAFE
55
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
7710F RT
7720F RT
7730F RT
7740F RT
7752F RT
7770BC RT
7731S RT
7732S RT
7735S RT
RT DOUBLE CARCASS 19 bar 7000 Series
RT DOUBLE CARCASS HOSE
Flexomarine half floating hose with one reinforced end (first off FPSO)
Flexomarine integral full-floating hose for mainline
Flexomarine integral full-floating hose with built-in reducer
Flexomarine integral full-floating hose for tail
Flexomarine integral full-floating tanker end hose (Jumbo)
Flexomarine integral with buoyancy control hoseDesigned upon request
Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).
Flexomarine standard mainline submarine hose
Flexomarine submarine hose for tanker end
RT DOU
BLE CAR
CASS 19 bar 7000 Series
PANTONE 255C: KNIFE
5 (FRONT)
Reeling Hose
D1 D2 D3 D4
RT DOUBLE CARCASS 19 bar 7000 Series
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
830
980
1200
810
960
1180
710
860
1020
730
880
1050
22452913
30234109
38405563
25543340
34374714
43706396
28443740
38255280
48677178
End Body Body End
Double Carcass Hose FLEXOMARINE SAFE One End Reinforced to be used in the or FPSO Offloading connection
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including teh weight of ancillary equipment or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
7710 F RT RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Type 7710 F RT First Off FPSO HOSE
GMPHOM 2009
3.6600(24")
1330 1300 1150 117050307537
57388686
64029763
FLEXOMARINE SAFE
59
Reeling Hose
D1D2 D2
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
710
860
1000
730
880
1025
19692637
27513837
35455268
22263011
31154392
40226048
24673363
34564912
44696779
Body End
7720 F RT
Type 7720 F RT Mainline Hose
GMPHOM 2009
RT DOUBLE CARCASS 19 bar 7000 Series
Double Carcass Hose FLEXOMARINE SAFE Mainline to be used as the main floating hose in the string
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
3.6600(24")
1170 117046617268
53028250
59059266
FLEXOMARINE SAFE
60
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
D3D1 D2
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)
400/300(16"/12")
500/400(20"/16")
1.8
2.4
880
1025
710
860
730
880
21202788
29624048
23973182
33544631
26563552
37225177
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
Type 7730 F RT Reducer Hose
GMPHOM 2009
7730 F RT
Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect larger mainline hose to smaller tail hose
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
RT DOUBLE CARCASS 19 bar 7000 Series
600/500(24"/20")
3.01170 1000 102538175540
43316357
48127123
FLEXOMARINE SAFE
61
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
D1D2 D2
Type 7740 F RT Tail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
710
860
1000
730
880
1025
20592727
27803866
35575280
23353121
31524429
40396066
25953490
35014957
44926802
Body End
GMPHOM 2009
7740 F RT
Double Carcass Hose FLEXOMARINE SAFE Tail for use to connect the end connection hose and the main floating string
This hose has flexiblility enouth to support seawater conditions during offloading
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
RT DOUBLE CARCASS 19 bar 7000 Series
3.6600(24")
1170 117047077214
53558303
59649325
FLEXOMARINE SAFE
62
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Type 7752 F RT Tanker End (Jumbo) Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
880
1070
1160
1200
1450
1550
1250
1500
1600
24323100
32824368
42045927
27403525
36994976
47416767
30273923
40885544
52427552
D3
GMPHOM 2009
7752 F RT
Double Carcass Hose FLEXOMARINE SAFE Tanker End for use to connectthe ship's manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
In the hose fittings liftings lugs can be welded to attach pick up device
Each lug are tested to support Safe Working Loads as follow:
12"= 100 kN 16"= 150 kN 20"= 200 kN
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
RT DOUBLE CARCASS 19 bar 7000 Series
2.4600(24")
1300 1600 163049727479
55878535
61469507
FLEXOMARINE SAFE
63
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Type 7770 BC RT Buoyancy Control Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
540
650
760
730
880
1025
19162585
26713757
34325155
21642949
30204296
38875913
23963292
33464802
43136624
Body End
D1D2D2
GMPHOM 2009
7770 BC RT
Double Carcass Hose FLEXOMARINE SAFE Buoyancy Control for use asthe second and third hose in the string
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
RT DOUBLE CARCASS 19 bar 7000 Series
3.6600(24")
940 115045457053
51658113
57469107
FLEXOMARINE SAFE
64
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
D3D1 D2 D4
Type 7731 S RT One Reinforced End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
710
810
920
515
615
725
490
590
700
700
800
900
1914593
2564860
32771126
2171637
2906925
37211217
2412678
3227985
41361302
D3 D4
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
7731 S RT
Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose to be used on FPSO connections
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
RT DOUBLE CARCASS 19 bar 7000 Series
2.4600(24")
1070 860 830 105043961545
50041680
55741807
FLEXOMARINE SAFE
65
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
D1 D2D2
Type 7732 S RT Mainline Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
490
590
700
700
800
900
-
-
-
-
-
-
1809561
2439811
31291058
2042595
2752862
35381129
2261628
3046909
39211196
Body End
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
7732 S RT
Double Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between reel and Tanker on reeling systems
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
2.4600(24")
830 1050 - -42171449
47831556
53141657
FLEXOMARINE SAFE
RT DOUBLE CARCASS 19 bar 7000 Series
66
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
D1 D2D2
Type 7735 S RT Tanker End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Submerged Weight Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
490
590
700
700
800
900
1818574
2449826
31421075
2051609
2762877
35501146
2270642
3056925
39331213
BodyEnd
GMPHOM 2009
12" = 100 kN 16" = 150 kN 20" = 200 kN
Double Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
7735 S RT
2.4600(24")
830 105042381446
48071564
53401665
FLEXOMARINE SAFE
RT DOUBLE CARCASS 19 bar 7000 Series
67
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
7810F RT
7820F RT
7830F RT
7840F RT
7852F RT
7870BC RT
7831S RT
7832S RT
7835S RT
RT DOUBLE CARCASS 21 bar 7000 Series
RT DOUBLE CARCASS HOSE
Flexomarine half floating hose with one reinforced end (first off FPSO)
Flexomarine integral full-floating hose for mainline
Flexomarine integral full-floating hose with built-in reducer
Flexomarine integral full-floating hose for tail
Flexomarine integral full-floating tanker end hose (Jumbo)
Flexomarine integral buoyancy control hoseDesigned upon request
Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).
Flexomarine standard mainline submarine hose
Flexomarine submarine hose for tanker end
RT DOU
BLE CAR
CASS 21 bar 7000 Series
PANTONE 255C: KNIFE
6 (FRONT)
Reeling Hose
D1 D2 D3 D4
RT DOUBLE CARCASS 21 bar 7000 Series
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
830
980
1200
810
960
1180
710
860
1020
730
880
1050
23152983
31174202
39585682
26333419
35434820
45056531
29323828
39435399
50187328
Double Carcass Hose FLEXOMARINE SAFE One Reinforced End be used in the FPSO Offloading connection
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including teh weight of ancillary equipment or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
7810 F RT RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Type 7810 F RT First Off FPSO HOSE
GMPHOM 2009
3.6600(24")
1330 1300 1150 117051867693
59168864
66009961
FLEXOMARINE SAFE
71
Reeling Hose
D1D2 D2
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
710
860
1000
730
880
1025
20302698
28363922
36545378
22953080
32114488
41466172
25433439
35635019
46076918
Body End
7820 F RT
Type 7820 F RT Mainline Hose
GMPHOM 2009
RT DOUBLE CARCASS 21 bar 7000 Series
Double Carcass Hose FLEXOMARINE SAFE Mainline to be used as the main floating hose in the string
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
3.6600(24")
1170 117048057312
54668414
60879449
FLEXOMARINE SAFE
72
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
D3D1 D2
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)
400/300(16"/12")
500/400(20"/16")
1.8
2.4
880
1025
710
860
730
880
21862854
30544140
24713256
34584735
27383634
38375293
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
Type 7830 F RT Reducer Hose
GMPHOM 2009
7830 F RT
Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect larger mainline hose to smaller tail hose
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
RT DOUBLE CARCASS 21 bar 7000 Series
600/500(24"/20")
3.01170 1000 102539355658
44656491
49617271
FLEXOMARINE SAFE
73
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
D1D2 D2
Type 7840 F RT Tail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
710
860
1000
730
880
1025
21232791
28663951
36665390
24083193
32494526
41646191
26753570
36095065
46316941
Body End
GMPHOM 2009
7840 F RT
Double Carcass Hose FLEXOMARINE SAFE Tail for use to connect the end connection rail hose and the main floating string
This hose has flexiblility enouth to support seawater conditions during offloading
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
RT DOUBLE CARCASS 21 bar 7000 Series
3.6600(24")
1170 117048537360
55218468
61489509
FLEXOMARINE SAFE
74
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Type 7852 F RT Tanker End (Jumbo) Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
880
1070
1160
1200
1450
1550
1250
1500
1600
25073175
33834469
43346057
28243610
38135090
48876914
31214017
42155671
54047714
D3
GMPHOM 2009
7852 F RT
Double Carcass Hose FLEXOMARINE SAFE Tanker End for use to connectthe ship's manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
In the hose fittings liftings lugs can be welded to attach pick up device
Each lug are tested to support Safe Working Loads as follow:
12"= 100 kN 16"= 150 kN 20"= 200 kN
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
2.4600(24")
1300 1600 163051267633
57608708
63369697
RT DOUBLE CARCASS 21 bar 7000 Series
FLEXOMARINE SAFE
75
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Type 7870 BC RT Buoyancy Control Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.8
2.4
3.0
300(12")
400(16")
500(20")
540
650
760
730
880
1025
19762644
27543840
35385261
22313016
31134390
40076033
24703366
34504906
44476757
Body End
D1D2D2
GMPHOM 2009
7870 BC RT
Double Carcass Hose FLEXOMARINE SAFE Buoyancy Control for use asthe second and third hose in the string
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
RT DOUBLE CARCASS 21 bar 7000 Series
3.6600(24")
940 115046867193
53258273
59249285
FLEXOMARINE SAFE
76
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
D3D1 D2 D4
Type 7831 S RT One Reinforced End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
710
810
920
515
615
725
490
590
700
700
800
900
1923596
2577864
32941131
2182640
2921929
37391223
2424682
3243990
41571309
D3 D4
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
7831 S RT
Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose to be used on FPSO connections
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
RT DOUBLE CARCASS 21 bar 7000 Series
2.4600(24")
1070 860 830 105044181553
50291688
56021816
FLEXOMARINE SAFE
77
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
D1 D2D2
Type 7832 S RT Mainline Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
490
590
700
700
800
900
-
-
-
-
-
-
1818563
2451815
31451063
2053598
2776866
35551135
2273631
3061914
39401202
Body End
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
7832 S RT
Double Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between reel and Tanker on reeling systems
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
RT DOUBLE CARCASS 21 bar 7000 Series
2.4600(24")
830 1050 - -42381456
48071564
53411665
FLEXOMARINE SAFE
78
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
D1 D2D2
Type 7835 S RT Tanker End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Submerged Weight Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
1.2
1.6
2.0
300(12")
400(16")
500(20")
490
590
700
700
800
900
1827577
2461830
31581080
2062612
2766881
35681152
2282645
3071929
39531219
BodyEnd
GMPHOM 2009
12" = 100 kN 16" = 150 kN 20" = 200 kN
Double Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
7835 S RT
RT DOUBLE CARCASS 21 bar 7000 Series
2.4600(24")
830 105043231471
49041580
54481682
FLEXOMARINE SAFE
79
Reeling Hose
RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
1000
Seri
es
15 b
ar16
00
1610
1620
1630
1640
1650
1652
1621
1622
1631
1632
1635
19 b
ar17
00
1710
1720
1730
1740
1750
1752
1721
1722
1731
1732
1735
21
bar
1800
1810
1820
1830
1840
1850
1852
1821
1822
1831
1832
1835
7000
Seri
es
15 b
ar76
00
7610
7620
7630
7640
7650
7652
7621
7622
7631
7632
7635
19 b
ar770
0
7710
772
0
773
0
774
0
775
0
775
2
772
1
772
2
773
1
773
2
773
5
21
bar
7800
7810
7820
7830
7840
7850
7852
7821
7822
7831
7832
7835
SU
FFIX
Flo
atin
gS
ubm
arin
eR
eeling
Type
Cat
enar
yExtr
aB
uoya
ncy
Hig
hFle
xB
uoya
ncy
Contr
ol
Both
Ends
Rein
forc
ed
or
Fully
Rein
forc
ed
Poly
ure
than
eC
over
FS
RT
CEB
HF
BC
FR
PU
1670
1770
1870
7670
7770
7870
Dra
win
gs
Fle
xom
arin
e inte
gra
l fu
ll-fl
oat
ing
tanke
r ra
il hose
(Jum
bo t
ype)
Fle
xom
arin
e inte
gra
l buoya
ncy
contr
ol hose
. D
esi
gned f
or
buoy
or
Reelin
g s
yste
ms
Fle
xom
arin
e (
firs
t off
the R
eel)
or
hal
f fl
oat
ing h
ose
wit
h o
ne r
ein
forc
ed
end (
firs
t off
the b
uoy)
Buoy a
nd R
eeling S
yst
em
Res
earc
h,
Dev
elopm
ent
and
Qual
ity A
ssura
nce
.
Flexomarine half floating hose with one reinforced end (first off the buoy)1610F
Flexomarine integral full-floatinghose for mainline1620F
Flexomarine integral full-floatinghose with built-in reducer1630F
Flexomarine integral full-floatinghose for tail1640F
Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)1650F
Flexomarine integral buoyancy control hose.Designed upon request1670BC
Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM
1621S
Flexomarine standard mainlinesubmarine hose with location collars1622S
Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM
1631S
Flexomarine standard mainline submarine hose1632S
Flexomarine submarine hose for tanker rail1635S
SINGLE CARCASS 15 bar 1000 Series
SINGLE CARCASS HOSE
PANTONE 255C: KNIFE
7 (FRONT)
SINGLE CARCASS
15 bar 1000 Series
D3D1 D2 D4
Single Carcass Hose FLEXOMARINE One End Reinforced for use in the first off the buoy position
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 5% or as requested
Electrical Continuity: Continuous or as requested
FLOATING SINGLE CARCASS 15 bar 1000 Series
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
335
400
460
530
620
740
855
280
335
390
455
515
600
720
360
450
530
590
735
845
1015
380
470
560
630
775
890
1060
602771
8131109
10731527
13802048
18722958
24584181
32635770
691890
9321280
12271761
15802365
21393415
28084834
37366684
7741001
10451442
13711980
17672663
23883844
31365446
41807541
End Body Body End
1610F SINGLE CARCASS FLOATING HOSE
Type 1610F First Off Buoy Hose
GMPHOM 2009
85
D1D2 D2
Type 1620F Mainline Hose
Single Carcass Hose FLEXOMARINE Mainline for use as the main floating hose in the string
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
360
415
500
555
705
840
985
385
445
535
590
745
885
1035
-
-
-
-
-
-
-
-
-
-
-
-
-
-
571740
7271023
9811435
11741842
17232809
23224045
31045611
650849
8261174
11131647
13282113
19493226
26304656
35276475
724951
9181315
12361845
14722368
21613617
29195229
39237284
1620F
FLOATING SINGLE CARCASS 15 bar 1000 Series
9.1m 10.7m 12.2m
SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
86
D3D1 D2
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)
200/150(8"/6")
250/200(10"/8")
250/150(10"/6")
300/250(12"/10")
300/200(12"/8")
300/150(12"/6")
400/300(16"/12")
400/250(16"/10")
500/400(20"/16")
500/300(20"/12")
600/500(24"/20")
600/400(24"/16")
0.9
1.2
0.9
1.5
1.2
0.9
1.8
390
450
435
545
495
465
615
360
415
360
500
415
360
560
380
440
380
535
440
380
600
-
-
-
-
-
-
-
540711
7151013
546714
9681424
7221017
551721
11991865
617817
8171166
623821
11021638
8251171
629829
13642148
689917
9121310
696921
12281839
9211316
703930
15192412
1.5
2.4
1.8
3.0
2.4
590
765
655
905
805
500
710
560
845
710
535
750
600
890
750
-
-
-
-
-
9771430
17312814
12051871
23224042
17402822
11071645
19703244
13712154
26464668
19803253
12401846
21953647
15272419
29495255
22063658
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
BodyEnd End
1630F
FLOATING SINGLE CARCASS 15 bar 1000 Series
Type 1630F Reducer Hose
Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect large mainline hose to smaller tail hose
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
87
D1D2 D2
FLOATING SINGLE CARCASS 15 bar 1000 Series
Type 1640F Tail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
370
420
505
565
710
845
390
450
540
600
750
890
-
-
-
-
-
-
-
-
-
-
-
-
594763
7621058
10201474
12911959
17972883
23944117
677876
8681216
11581692
14662252
20363313
27154741
755982
9661363
12881897
16302526
22603716
30165326
Body End
Single Carcass Hose FLEXOMARINE Tail for use to connect the tanker rail hose and the floating string
This hose has flexiblility enouth to support seawater conditions during offloading
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
1640F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
88
FLOATING SINGLE CARCASS 15 bar 1000 Series
Type 1650F Tanker Rail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
435
495
615
685
830
1000
305
420
475
535
680
795
490
550
670
790
990
1215
-
-
-
-
-
-
572742
7771073
10381492
13502018
18532939
24684192
646845
8811229
11721706
15262312
20953372
27894815
714941
9791375
12971906
16912587
23203776
30875398
BodyEnd
D3
End
1650F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
as requested
as requested
89
D1 D2D2
FLOATING SINGLE CARCASS 15 bar 1000 Series
Type 1670BC Buoyancy Control Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
305
370
445
510
625
735
885
325
415
510
545
665
780
900
-
-
-
-
-
-
-
-
-
-
-
-
-
-
517686
696992
9431397
11611829
16652751
22323955
29855492
589788
7931141
10721606
13192105
18933170
25394565
34076355
658884
8851282
11931802
14682364
21073562
28275137
38037164
Body End
Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
1670BC SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
90
D3 D2D4 D1
SUBMARINE SINGLE CARCASS 15 bar 1000 Series
Type 1621S One Reinforced End Hose With Location Collars
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
MinimumBendingRadius
(m)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
310
370
420
471
581
697
799
420
471
581
581
697
799
946
350
405
470
530
625
740
855
275
330
385
440
535
645
755
610197
788262
1043364
1308507
1803744
23961013
31181360
698221
902293
1188404
1490565
2050826
27261127
35511520
776242
1001321
1317441
1654619
2269901
30201232
39401668
Body End
D3 D4
BodyEnd
Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Collar Hose
Submerged Weight Full of Sea Water (kg)
1621S SINGLE CARCASS SUBMARINE HOSE 91
D2D1D2
Type 1622S Mainline Hose With Location Collars
NominalBore(mm) D1 D2
Collar Outside Diameter (mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
310
370
420
471
581
697
799
420
471
581
581
697
799
946
-
-
-
-
-
-
-
-
-
-
-
-
-
-
572175
744233
997329
1239461
1737683
2316929
30241246
646191
841255
1122358
1398505
1955747
26121017
34161370
715207
931276
1239386
1548547
2161806
28901099
37841487
Body End
Single Carcass Hose FLEXOMARINE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
SUBMARINE SINGLE CARCASS 15 bar 1000 Series
Submerged Weight Full of Sea Water (kg)
1622S SINGLE CARCASS SUBMARINE HOSE
GMPHOM 2009
92
D3D1 D2 D4
Type 1631S One Reinforced End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
350
405
470
530
625
740
855
275
330
385
440
535
645
755
250
305
360
415
505
620
730
340
395
460
520
615
730
840
583193
755257
998358
1272502
1745736
23261004
30361349
666216
861288
1135397
1446559
1978816
26391116
34511507
744238
960316
1264434
1610613
2198892
29331221
38401655
BodyEnd
D3 D4
Body End
Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
1631S
SUBMARINE SINGLE CARCASS 15 bar 1000 Series
Submerged Weight Full of Sea Water (kg)
SINGLE CARCASS SUBMARINE HOSE
GMPHOM 2009
93
D1 D2D2
Type 1632S Mainline Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
250
305
360
415
505
620
730
340
395
460
520
615
730
840
-
-
-
-
-
-
-
-
-
-
-
-
-
-
519168
678225
908318
1169452
1621669
2178912
28601226
587184
767246
1025346
1320495
1826731
2457997
32351348
651199
850266
1135373
1461536
2019788
27181077
35851462
Body End
Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifoldand buoy connection used on monobuoy systems
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
1632S
SUBMARINE SINGLE CARCASS 15 bar 1000 Series
Submerged Weight Full of Sea Water (kg)
SINGLE CARCASS SUBMARINE HOSE
GMPHOM 2009
94
D1 D2D2
Type 1635S Tanker Rail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Submerged Weight Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
250
305
360
415
505
620
340
395
460
520
615
730
-
-
-
-
-
-
-
-
-
-
-
-
519168
678225
908318
1169452
1621669
2178912
587184
767246
1025346
1320495
1826731
2457997
651199
850266
1135373
1461536
2019788
27181077
BodyEnd
Single Carcass Hose FLEXOMARINE Tanker Rail Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
1635S
SUBMARINE SINGLE CARCASS 15 bar 1000 Series
SINGLE CARCASS SUBMARINE HOSE
GMPHOM 2009
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
95
Flexomarine half floating hose with one reinforced end (first off the buoy)
Flexomarine integral full-floatinghose for mainline
Flexomarine integral full-floatinghose with built-in reducer
Flexomarine integral full-floatinghose for tail
Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)
Flexomarine integral buoyancy control hose.Designed upon request
Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM
Flexomarine standard mainlinesubmarine hose with location collars
Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM
Flexomarine standard mainline submarine hose
Flexomarine submarine hose for tanker rail
1710F
1720F
1730F
1740F
1750F
1770BC
1721S
1722S
1731S
1732S
1735S
SINGLE CARCASS 19 bar 1000 Series
SINGLE CARCASS HOSE
SINGLE CARCASS 19 bar
1000 Series
PANTONE 255C: KNIFE
8 (FRONT)
D3D1 D2
D4
FLOATING SINGLE CARCASS 19 bar 1000 Series
Type 1710F First Off Buoy Hose
Single Carcass Hose FLEXOMARINE One End Reinforced for use in the first off the buoy position
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 5% or as requested
Electrical Continuity: Continuous or as requested
1710F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
375
430
495
565
665
775
905
295
345
405
470
540
655
780
375
460
545
610
760
895
1075
410
495
585
655
810
950
1135
736905
9441240
12441698
16042273
21763262
28204543
37886295
8431042
10811429
14211955
18362621
24863763
32215247
43387285
9441171
12081605
15872196
20522948
27774233
35965907
48538215
End Body Body End
99
D1D2 D2
FLOATING SINGLE CARCASS 19 bar 1000 Series
Type 1720F Mainline Hose
Single Carcass Hose FLEXOMARINE Mainline for use as the main floating hose in the string
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
1720F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
360
420
505
560
710
845
995
385
450
540
595
750
890
1040
-
-
-
-
-
-
-
-
-
-
-
-
-
-
571740
7571053
10171471
12141882
17712857
23794102
31755682
650849
8621210
11541688
13752161
20053282
26974724
36106558
724951
9591356
12841893
15262421
22253681
29965306
40187379
Body End
100
D3D1 D2
FLOATING SINGLE CARCASS 19 bar 1000 Series
Type 1730F Reducer Hose
Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect large mainline hose to smaller tail hose
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
1730F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)
200/150(8"/6")
250/200(10"/8")
250/150(10"/6")
300/250(12"/10")
300/200(12"/8")
300/150(12"/6")
400/300(16"/12")
400/250(16"/10")
500/400(20"/16")
500/300(20"/12")
600/500(24"/20")
600/400(24"/16")
0.9
1.2
0.9
1.5
1.2
0.9
1.8
410
465
455
560
510
485
635
365
420
365
505
420
365
570
400
455
400
550
455
400
620
-
-
-
-
-
-
-
587756
7471043
593762
10211475
7541050
599768
12841953
666865
8461194
673872
11561690
8541202
680879
14552241
741967
9391336
748975
12831892
9481345
755982
16152511
1.5
2.4
1.8
3.0
2.4
605
790
675
925
830
505
725
570
860
725
550
775
620
910
775
-
-
-
-
-
10311485
18702956
12911959
24714194
18792965
11621696
21213398
14622248
28054831
21323408
12961904
23563812
16232519
31185428
23683824
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
BodyEnd End
101
D1D2 D2
FLOATING SINGLE CARCASS 19 bar 1000 Series
Type 1740F Tail Hose
Single Carcass Hose FLEXOMARINE Tail for use to connect the tanker rail hose and the floating string
This hose has flexiblility enough to support seawater conditions during offloading
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
1740F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
370
425
510
570
715
850
390
455
545
605
755
895
-
-
-
-
-
-
-
-
-
-
-
-
594763
7941090
10561510
13332001
18452931
24514175
677896
9051253
12011735
15152301
20933370
27834809
755982
10081405
13361945
16862581
23263781
30945404
Body End
102
FLOATING SINGLE CARCASS 19 bar 1000 Series
Type 1750F Tanker Rail Hose
Single Carcass Hose FLEXOMARINE Tanker Rail for use to connect the ship's manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs to attach pick-up and snubbing chains
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Discontinuous or as requested
1750F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0,6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
465
520
640
710
865
1030
320
430
490
555
705
815
520
575
695
820
1025
1245
-
-
-
-
-
-
660829
8561152
11471602
15022170
20723158
27114435
742941
9661314
12921826
16952481
23393616
30585085
8191046
10691466
14262035
18752771
25884044
33825692
BodyEnd
D3
End
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
103
D1 D2D2
Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
FLOATING SINGLE CARCASS 19 bar 1000 Series
Type 1770BC Buoyancy Control Hose
1770BC SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
310
370
450
515
640
750
905
345
435
525
565
690
805
930
-
-
-
-
-
-
-
-
-
-
-
-
-
-
565734
7281024
9961450
12461914
18032889
23794103
32575764
640839
8231171
11271661
14102196
20433320
26974724
37076655
710937
9131310
12491858
15642460
22683724
29955306
41297491
Body End
104
D3 D2D4 D1
Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
SUBMARINE SINGLE CARCASS 19 bar 1000 Series
Type 1721S One Reinforced End Hose With Location Collars
1721S SINGLE CARCASS SUBMARINE HOSE
GMPHOM 2009
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
310
370
420
471
581
697
799
420
471
581
581
697
799
946
350
415
475
535
630
745
860
275
335
390
445
540
650
765
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
MinimumBendingRadius
(m)Body End
D3 D4
BodyEnd
Collar Hose
Submerged Weight Full of Sea Water (kg)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
610197
818268
1076370
1346515
1848751
24491022
31841375
698221
936300
1227412
1535574
2103835
27891138
36271537
776242
1041329
1362450
1706629
2330912
30931245
40291687
105
D2D1D2
SUBMARINE SINGLE CARCASS 19 bar 1000 Series
Type 1722S Mainline Hose With Location Collars
Single Carcass Hose FLEXOMARINE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
310
370
420
471
581
697
799
420
471
581
581
697
799
946
-
-
-
-
-
-
-
-
-
-
-
-
-
-
572175
770238
1027334
1273467
1776689
2363936
30821257
646191
871261
1156364
1439512
2002753
26681024
34841383
715207
966282
1279392
1594555
2214814
29541108
38621501
1722S
NominalBore(mm) D1 D2
Collar Outside Diameter (mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)Body End
Submerged Weight Full of Sea Water (kg)
SINGLE CARCASS SUBMARINE HOSE
GMPHOM 2009
106
D3D1 D2 D4
SUBMARINE SINGLE CARCASS 19 bar 1000 Series
Type 1731S One Reinforced End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
350
415
475
535
630
745
860
275
335
390
445
540
650
765
250
310
365
420
515
625
735
340
400
465
525
620
735
850
583193
787264
1034365
1314510
1793744
23841013
31071364
666216
898295
1178405
1496569
2036826
27081127
35351524
744238
1003324
1313443
1666624
2263903
30121234
39361674
BodyEnd
D3 D4
Body End
Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
1731S
Submerged Weight Full of Sea Water (kg)
SINGLE CARCASS SUBMARINE HOSE
GMPHOM 2009
107
D1 D2D2
SUBMARINE SINGLE CARCASS 19 bar 1000 Series
Type 1732S Mainline Hose
Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
250
310
365
420
515
625
735
340
400
465
525
620
735
860
-
-
-
-
-
-
-
-
-
-
-
-
-
-
519168
709231
943324
1209459
1668676
2234920
29301238
587184
803252
1066353
1367504
1882738
25231007
33161362
651199
891273
1181380
1515545
2082797
27941088
36791478
Body End
1732S
Submerged Weight Full of Sea Water (kg)
SINGLE CARCASS SUBMARINE HOSE
GMPHOM 2009
108
D1 D2D2
Type 1735S Tanker Rail Hose
Single Carcass Hose FLEXOMARINE Tanker Rail Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0,6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
250
310
365
420
515
625
340
400
465
525
620
735
-
-
-
-
-
-
-
-
-
-
-
-
519168
709231
943324
1209459
1668676
2234920
587184
803252
1066353
1367504
1882738
25231007
651199
891273
1181380
1515545
2082797
27941088
BodyEnd
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
1735S
Submerged Weight Full of Sea Water (kg)
SINGLE CARCASS SUBMARINE HOSE
SUBMARINE SINGLE CARCASS 19 bar 1000 Series
GMPHOM 2009
109
Flexomarine half floating hose with one reinforced end (first off the buoy)
Flexomarine integral full-floatinghose for mainline
Flexomarine integral full-floatinghose with built-in reducer
Flexomarine integral full-floatinghose for tail
Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)
Flexomarine integral buoyancy control hose.Designed upon request
Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM
Flexomarine standard mainlinesubmarine hose with location collars
Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM
Flexomarine standard mainline submarine hose
Flexomarine submarine hose for tanker rail
1810F
1820F
1830F
1840F
1850F
1870BC
1821S
1822S
1831S
1832S
1835S
SINGLE CARCASS 21 bar 1000 Series
SINGLE CARCASS HOSE
SINGLE CARCASS 21 bar
1000 Series
SINGLE CARCASS 21 bar 1000 Series
PANTONE 255C: KNIFE
9 (FRONT)
D3D1 D2
D4
FLOATING SINGLE CARCASS 21 bar 1000 Series
Type 1810F First Off Buoy Hose
Single Carcass Hose FLEXOMARINE One End Reinforced for use in the first off the buoy position
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 5% or as requested
Electrical Continuity: Continuous or as requested
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
375
430
495
565
665
775
905
295
345
405
470
540
655
780
375
460
545
610
760
895
1075
410
495
585
655
810
950
1135
758928
9731269
12821736
16542322
22443329
29074630
39056412
8691068
11141462
14651999
18922678
25633840
33205346
44727420
9731200
12461643
16362245
21163012
28634318
37086018
50038364
End Body Body End
1810F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
113
D1D2 D2
FLOATING SINGLE CARCASS 21 bar 1000 Series
Type 1820F Mainline Hose
Single Carcass Hose FLEXOMARINE Mainline for use as the main floating hose in the string
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
370
420
505
565
715
850
1005
390
450
540
605
755
895
1050
-
-
-
-
-
-
-
-
-
-
-
-
-
-
597766
7571053
10171471
12531921
18212906
24394162
33145821
680879
8621210
11541688
14212207
20643341
27684794
37746722
758985
9591356
12841893
15782474
22923748
30775387
42057567
Body End
1820F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
114
D3D1 D2
FLOATING SINGLE CARCASS 21 bar 1000 Series
Type 1830F Reducer Hose
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)
200/150(8"/6")
250/200(10"/8")
250/150(10"/6")
300/250(12"/10")
300/200(12"/8")
300/150(12"/6")
400/300(16"/12")
400/250(16"/10")
500/400(20"/16")
500/300(20"/12")
600/500(24"/20")
600/400(24"/16")
0.9
1.2
0.9
1.5
1.2
0.9
1.8
410
465
455
560
510
485
635
365
420
365
505
420
365
570
400
455
400
550
455
400
620
-
-
-
-
-
-
-
605776
7701067
611779
10521509
7771072
617787
13241990
687888
8721222
694891
11921728
8811227
701900
15002283
763992
9681367
771996
13221934
9781372
7791006
16652558
1.5
2.4
1.8
3.0
2.4
605
790
675
925
830
505
725
570
860
725
550
775
620
910
775
-
-
-
-
-
10631515
19283010
13311996
25474266
19373019
11981735
21873459
15082290
28924913
21973470
13361942
24293881
16732565
32145519
24413892
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
BodyEnd End
Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect large mainline hose to smaller tail hose
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
1830F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
115
D1D2 D2
FLOATING SINGLE CARCASS 21 bar 1000 Series
Type 1840F Tail Hose
Single Carcass Hose FLEXOMARINE Tail for use to connect the tanker rail hose and the floating string
This hose has flexiblility enouth to support seawater conditions during offloading
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
375
425
510
575
720
855
400
455
545
610
760
900
-
-
-
-
-
-
-
-
-
-
-
-
621790
7941090
10561510
13732042
18162982
25124235
708907
9051253
12011735
15632349
21533430
28544881
7901017
10081405
13361945
17412636
23943849
31755485
Body End
1840F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
116
FLOATING SINGLE CARCASS 21 bar 1000 Series
Type 1850F Tanker Rail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0,6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
465
520
640
710
865
1030
320
430
490
555
705
815
520
575
695
820
1025
1245
-
-
-
-
-
-
680849
8831179
11831637
15482216
21363222
27954519
765964
9961344
13321866
17472533
24113688
31535179
8441071
11021499
14712080
19332829
26684124
34865797
BodyEnd
D3
End
Single Carcass Hose FLEXOMARINE Tanker Rail for use to connect the ship's manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs to attach pick-up and snubbing chains
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Discontinuous or as requested
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
1850F SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
117
D1 D2D2
Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
310
370
450
515
640
750
905
345
435
525
565
690
805
930
-
-
-
-
-
-
-
-
-
-
-
-
-
-
582751
7501046
10271481
12841953
18592945
24534176
33585865
659859
8491197
11621696
14542239
21063383
27814807
38226770
732959
9411338
12881897
16122508
23383794
30885398
42577618
Body End
FLOATING SINGLE CARCASS 21 bar 1000 Series
Type 1870BC Buoyancy Control Hose
1870BC SINGLE CARCASS FLOATING HOSE
GMPHOM 2009
118
D3 D2D4 D1
Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
SUBMARINE SINGLE CARCASS 21 bar 1000 Series
Type 1821S One Reinforced End Hose With Location Collars
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
310
370
420
471
581
697
799
420
471
581
581
697
799
946
355
415
475
540
635
750
870
280
335
390
455
545
655
775
635202
818268
1076370
1384521
1895761
25051034
33111399
727227
936300
1227412
1580582
2158846
28541151
37781566
809249
1041329
1362450
1757638
2393925
31691260
42031720
1821S SINGLE CARCASS SUBMARINE HOSE
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
MinimumBendingRadius
(m)Body End
D3 D4
BodyEnd
Collar Hose
Submerged Weight Full of Sea Water (kg)
GMPHOM 2009
119
D2D1D2
SUBMARINE SINGLE CARCASS 21 bar 1000 Series
Type 1822S Mainline Hose With Location Collars
Single Carcass Hose FLEXOMARINE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
310
370
420
471
581
697
799
420
471
581
581
697
799
946
-
-
-
-
-
-
-
-
-
-
-
-
-
-
594179
770238
1027334
1306472
1817697
2412945
31951276
671196
871261
1156364
1478518
2051762
27261035
36191405
744212
966282
1279392
1639561
2270823
30221120
40181526
1822S
NominalBore(mm) D1 D2
Collar Outside Diameter (mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)Body End
Submerged Weight Full of Sea Water (kg)
SINGLE CARCASS SUBMARINE HOSE
GMPHOM 2009
120
D3D1 D2 D4
SUBMARINE SINGLE CARCASS 21 bar 1000 Series
Type 1831S One Reinforced End Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
355
415
475
540
635
750
870
280
335
390
455
545
655
775
255
310
365
425
520
630
750
345
400
465
530
625
740
860
610199
787264
1034365
1355517
1844754
24451026
32461391
698223
898295
1178405
1544577
2096838
27801141
37001555
780245
1003324
1313443
1722634
2332917
30941250
41261710
BodyEnd
D3 D4
Body End
Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
1831S
Submerged Weight Full of Sea Water (kg)
SINGLE CARCASS SUBMARINE HOSE
GMPHOM 2009
121
D1 D2D2
SUBMARINE SINGLE CARCASS 21 bar 1000 Series
Type 1832S Mainline Hose
Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
255
310
365
425
520
630
750
345
400
465
530
625
740
860
-
-
-
-
-
-
-
-
-
-
-
-
-
-
545173
709231
943324
1249465
1718684
2294930
30661260
617189
803252
1066353
1414510
1940748
25931019
34781387
685205
891273
1181380
1569553
2149808
28741101
38641507
Body End
1832S
Submerged Weight Full of Sea Water (kg)
SINGLE CARCASS SUBMARINE HOSE
GMPHOM 2009
122
D1 D2D2
Type 1835S Tanker Rail Hose
Single Carcass Hose FLEXOMARINE Tanker Rail Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0,6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
255
310
365
425
520
630
345
400
465
530
625
740
-
-
-
-
-
-
-
-
-
-
-
-
545173
709231
943324
1249465
1718684
2294930
617189
803252
1066353
1414510
1941748
25931019
685205
891273
1181380
1569553
2149808
28741101
BodyEnd
1835S
Submerged Weight Full of Sea Water (kg)
SINGLE CARCASS SUBMARINE HOSE
SUBMARINE SINGLE CARCASS 21 bar 1000 Series
GMPHOM 2009
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
123
Flexomarine half floating hose with one reinforced end (first off the buoy)7610F
Flexomarine integral full-floatinghose for mainline7620F
Flexomarine integral full-floatinghose with built-in reducer7630F
Flexomarine integral full-floatinghose for tail7640F
Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)7650F
Flexomarine integral buoyancy control hose.Designed upon request7670BC
Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM
7621S
Flexomarine standard mainlinesubmarine hose with location collars7622S
Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM
7631S
Flexomarine standard mainline submarine hose7632S
Flexomarine submarine hose for tanker rail7635S
DOUBLE CARCASS 15 bar 7000 Series
DOUBLE CARCASS ANTI-POLLUTION HOSE FLEXOMARINE SAFE
SINGLE CARCASS 15 bar
1000 SeriesD
OUB
LE CARCASS 15 bar
7000 Series
PANTONE 255C: KNIFE
10 (FRONT)
D3D1 D2 D4
FLOATING DOUBLE CARCASS 15 bar 7000 Series
Type 7610F First Off Buoy Hose FLEXOMARINE SAFE
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
420
490
550
630
725
840
985
325
390
445
515
605
720
855
410
500
580
650
825
965
1150
465
560
650
725
855
990
1190
8731042
11811477
14941948
19422610
25843670
32624985
44616968
9901189
13421690
16942228
22032989
29274204
37065732
50868033
11011328
14921889
18832491
24483344
32504705
41236433
56719032
End Body Body End
Double Carcass Hose FLEXOMARINE SAFE One End Reinforced for use in the first off the buoy position
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 5% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
7610F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Double carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
127
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
405
495
575
640
790
935
1095
460
555
640
715
815
960
1130
-
-
-
-
-
-
-
-
-
-
-
-
-
-
788958
10741370
13701824
17282396
23833469
30484771
41806687
8901089
12141562
15482082
19492735
26903967
34545480
47557703
9851212
13451742
17142323
21573052
29784434
38356145
52948655
Body End
Double Carcass Hose FLEXOMARINE SAFE Mainline for use as the main floating hose in the string
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
D1D2 D2
Type 7620F Mainline Hose
7620F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
128
D3D1 D2
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)
200/150(8"/6")
250/200(10"/8")
250/150(10"/6")
300/250(12"/10")
300/200(12"/8")
300/150(12"/6")
400/300(16"/12")
400/250(16"/10")
500/400(20"/16")
500/300(20"/12")
600/500(24"/20")
600/400(24"/16")
0.9
1.2
0.9
1.5
1.2
0.9
1.8
470
565
515
650
610
545
730
405
495
405
575
495
405
640
460
555
460
640
555
460
715
-
-
-
-
-
-
-
784956
10681367
792960
13631820
10791372
800969
17372401
8861087
12081559
8941091
15402077
12201565
9031102
19592740
9801210
13381738
9901215
17062318
13521745
10001227
21673058
1.5
2.4
1.8
3.0
2.4
695
830
770
975
870
575
790
640
935
790
640
815
715
960
815
-
-
-
-
-
13771828
23953476
17452408
30634781
24073486
15552086
27033975
19692749
34715491
27173987
17232328
29934443
21783068
38546157
30084456
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
BodyEnd End
Type 7630F Reducer Hose
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
7630F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect large mainline hose to smaller tail hose
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
129
Type 7640F Tail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
410
500
580
650
795
940
465
560
650
725
820
965
-
-
-
-
-
-
-
-
-
-
-
-
812981
11101406
14111865
18442512
24543540
31174840
9181117
12561604
15962130
20872872
27754051
35365562
10171244
13941791
17702378
23153210
30754531
39296239
Body End
D1D2 D2
Double Carcass Hose FLEXOMARINE SAFE Tail for use to connect the tanker rail hose and the floating string
This hose has flexiblility enouth to support seawater conditions during offloading
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
7640F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
130
Type 7650F Tanker Rail Hose
Double Carcass Hose FLEXOMARINE SAFE Tanker Rail for use to connect the ship's manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs to attach pick-up and snubbing chains
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0,6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
520
585
705
780
930
1100
355
470
530
595
745
855
570
640
755
890
1095
1315
-
-
-
-
-
-
8491018
11521448
14661920
19192587
25543640
32484971
9511150
12961644
16462180
21572943
28704147
36575683
10451272
14311828
18152424
23793275
31654621
40396349
BodyEnd
D3
End
7650F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
Weight in Air Full of Sea Water (kg)
Double Leak Detection System
131
Type 7670BC Buoyancy Control Hose
Double Carcass Hose FLEXOMARINE SAFE Buoyancy Control for use as the second and third hose in the string
Rated Working Pressure: 15 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
350
445
495
565
685
795
960
405
505
560
640
765
875
1020
-
-
-
-
-
-
-
-
-
-
-
-
-
-
762931
10441340
13251779
16802349
23103396
29454669
40736581
8581057
11791527
14952029
18932678
26033880
33315358
46277575
9491176
13051702
16532262
20922988
28784334
36936003
51468508
Body End
D1 D2
7670BC DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
132
Type 7621S One Reinforced End Hose
Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
370
420
581
697
799
946
471
581
581
697
799
876
1050
420
490
550
630
725
840
985
315
380
435
505
595
710
845
827215
1119304
1399410
1872593
2478851
31131092
42821516
940229
1270323
1587438
2128637
2814916
35461184
48931654
1037241
1403341
1755462
2351677
3104974
39241267
54291779
471
D3 D2D4 D1
7621S DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
MinimumBendingRadius
(m)Body End
D3 D4
BodyEnd
Collar Hose
Submerged Weight Full of Sea Water (kg)
FLEXOMARINE SAFE
SUBMARINE DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
133
Type 7622S Mainline Hose With Location Collars
Double Carcass Hose FLEXOMARINE SAFE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
370
420
471
581
697
799
946
471
581
581
697
799
876
1050
-
-
-
-
-
-
-
-
-
-
-
-
-
-
801209
1088291
1346391
1841569
2457817
30701036
42461435
900219
1222306
1514411
2073605
2765869
34681108
48151544
993229
1348320
1672430
2293639
3056918
38441175
53511647
D2D1D2
7622S
NominalBore(mm) D1 D2
Collar Outside Diameter (mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)Body End
Submerged Weight Full of Sea Water (kg)
DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
SUBMARINE DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
134
Type 7631S One Reinforced End Hose
Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
420
490
550
630
725
840
985
315
380
435
505
595
710
845
290
355
410
480
570
685
820
410
480
540
620
715
830
975
792211
1075298
1365406
1800583
2376838
30131079
41431497
896223
1218317
1544432
2038625
2685899
34161167
47151631
993235
1351334
1712457
2261665
2975957
37951250
52521756
BodyEnd
D3 D4
Body End
D3D1 D2 D4
7631S
Submerged Weight Full of Sea Water (kg)
DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
SUBMARINE DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
135
Type 7632S Mainline Hose
Double Carcass Hose FLEXOMARINE SAFE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
290
355
410
480
570
685
820
410
480
540
620
715
830
975
-
-
-
-
-
-
-
-
-
-
-
-
-
-
732204
1002285
1279387
1699557
2255797
28711015
39691404
822213
1127298
1439406
1913591
2537845
32411084
45011509
906222
1245311
1588424
2114622
2800891
35871148
49991607
Body End
D1 D2D2
7632S
Submerged Weight Full of Sea Water (kg)
DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
SUBMARINE DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
136
D1 D2D2
Type 7635S Tanker Rail Hose
Double Carcass Hose FLEXOMARINE SAFE Tanker Rail Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 15 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0,6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
290
355
410
480
570
685
410
480
540
620
715
830
-
-
-
-
-
-
-
-
-
-
-
-
736208
1007290
1285393
1708565
2266807
28831028
826218
1133304
1445412
1922599
2547856
32531096
911226
1250316
1594430
2123631
2811901
36001160
BodyEnd
7635S
Submerged Weight Full of Sea Water (kg)
DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
SUBMARINE DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
Double Leak Detection System
137
Flexomarine half floating hose with one reinforced end (first off the buoy)7710F
Flexomarine integral full-floatinghose for mainline7720F
Flexomarine integral full-floatinghose with built-in reducer7730F
Flexomarine integral full-floatinghose for tail7740F
Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)7750F
Flexomarine integral buoyancy control hose.Designed upon request7770BC
Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM
7721S
Flexomarine standard mainlinesubmarine hose with location collars7722S
Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM
7731S
Flexomarine standard mainline submarine hose7732S
Flexomarine submarine hose for tanker rail7735S
DOUBLE CARCASS 19 bar 7000 Series
DOUBLE CARCASS ANTI-POLLUTION HOSE FLEXOMARINE SAFE
DOU
BLE CAR
CASS 19 bar 7000 Series
PANTONE 255C: KNIFE
11 (FRONT)
FLOATING DOUBLE CARCASS 19 bar 7000 Series
Type 7710F First Off Buoy Hose
Double Carcass Hose FLEXOMARINE SAFE One End Reinforced for use in the first off the buoy position
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 5% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
D3D1 D2 D4
7710F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Double carcass hose developed and tested for offshore mooring applications
FLEXOMARINE SAFE
GMPHOM 2009
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
435
500
575
645
745
865
1005
340
400
465
530
630
740
870
425
510
600
665
850
985
1170
480
570
670
740
875
1015
1210
9231093
12031499
15772031
20052673
26993785
34285151
45737080
10511250
13701718
17912325
22813066
30684345
39025928
52178164
11711398
15251922
19922600
25393435
34154871
43466656
58209181
End Body Body End
Double Leak Detection System
141
Type 7720F Mainline Hose
Double Carcass Hose FLEXOMARINE SAFE Mainline for use as the main floating hose in the string
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
D1D2 D2
7720F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 19 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
415
500
585
655
810
950
1105
470
560
660
730
835
985
1150
-
-
-
-
-
-
-
-
-
-
-
-
-
-
817986
10711367
14221877
17582426
24563542
31654888
42376744
9241123
12121560
16082142
19872773
27814058
35915617
48207768
10261252
13441741
17812390
22033098
30864542
39906301
53688729
Body End
Double Leak Detection System
142
D3D1 D2
Type 7730F Reducer Hose
Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect large mainline hose to smaller tail hose
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
7730F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 19 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)
200/150(8"/6")
250/200(10"/8")
250/150(10"/6")
300/250(12"/10")
300/200(12"/8")
300/150(12"/6")
400/300(16"/12")
400/250(16"/10")
500/400(20"/16")
500/300(20"/12")
600/500(24"/20")
600/400(24"/16")
0.9
1.2
0.9
1.5
1.2
0.9
1.8
480
570
525
670
615
555
745
415
500
415
585
500
415
655
470
560
470
660
560
470
730
-
-
-
-
-
-
-
813982
10651361
821990
14151869
10761372
829998
17672435
9201119
12061554
9291128
16002134
12181566
9381137
19972783
10201247
13371734
10311258
17732381
13511748
10411268
22143109
1.5
2.4
1.8
3.0
2.4
715
850
785
1000
890
585
810
655
950
810
660
835
730
985
835
-
-
-
-
-
14291884
24693555
17752444
31814904
24813567
16162150
27954072
20072793
36095635
28094086
17902399
31014557
22253120
40106320
31174573
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
BodyEnd End
Double Leak Detection System
143
Type 7740F Tail Hose
Double Carcass Hose FLEXOMARINE SAFE Tail for use to connect the tanker rail hose and the floating string
This hose has flexiblility enouth to support seawater conditions during offloading
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
D1D2 D2
7740F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 19 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
420
505
595
660
815
955
475
565
665
735
840
990
-
-
-
-
-
-
-
-
-
-
-
-
8401010
11061402
14631918
18722540
25273613
32334956
9531152
12541602
16562190
21232909
28654142
36725698
10581285
13921789
18372446
23593254
31834639
40846394
Body End
Double Leak Detection System
144
Type 7750F Tanker Rail Hose
7750F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Double Carcass Hose FLEXOMARINE SAFE Tanker Rail for use to connect the ship's manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs to attach pick-up and snubbing chains
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 19 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0,6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
530
590
720
790
950
1120
365
480
540
610
760
875
585
645
775
900
1110
1340
-
-
-
-
-
-
8761046
11471443
15191973
19452613
26263711
33635086
9841183
12921640
17072241
21922977
29594236
37935819
10851312
14291825
18832492
24223318
32714727
41946504
BodyEnd
D3
End
Double Leak Detection System
145
Type 7770BC Buoyancy Control Hose
Double Carcass Hose FLEXOMARINE SAFE Buoyancy Control for use as the second and third hose in the string
Rated Working Pressure: 19 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
D1 D2D2
7770BC DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 19 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
360
450
505
575
700
810
970
415
510
580
650
780
900
1040
-
-
-
-
-
-
-
-
-
-
-
-
-
-
790960
10421338
13781833
17112379
23853471
30644787
41326640
8931092
11781526
15562090
19322718
26963973
34705497
46967644
9911218
13051702
17222331
21393035
29884444
38516161
52248585
Body End
Double Leak Detection System
146
Type 7721S One Reinforced End Hose With Location Collars
Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
D3 D2D4 D1
7721S DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
Double carcass hose developed and tested for offshore mooring applications
SUBMARINE DOUBLE CARCASS 19 bar 7000 Series
GMPHOM 2009
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
370
420
581
697
799
946
471
581
697
697
876
946
1050
435
495
570
640
740
860
1000
330
385
450
515
615
725
855
850212
1112298
1468417
1890581
2557844
32331100
43211507
967225
1264318
1662443
2152625
2907910
36811191
49361642
1070237
1398336
1837467
2383665
3214968
40781274
54821764
471
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
MinimumBendingRadius
(m)Body End
D3 D4
BodyEnd
Collar Hose
Submerged Weight Full of Sea Water (kg)
Double Leak Detection System
147
Type 7722S Mainline Hose With Location Collars
D2D1D2
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
370
420
471
581
697
799
946
471
581
697
697
876
946
1050
-
-
-
-
-
-
-
-
-
-
-
-
-
-
818204
1078285
1431401
1851556
2542809
31901046
42681428
922215
1213300
1605422
2090592
2864861
36041117
48431536
1019224
1339314
1769441
2314625
3167910
39941185
53841637
Double Carcass Hose FLEXOMARINE SAFE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
7722S
NominalBore(mm) D1 D2
Collar Outside Diameter (mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)Body End
Submerged Weight Full of Sea Water (kg)
DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
Double carcass hose developed and tested for offshore mooring applications
SUBMARINE DOUBLE CARCASS 19 bar 7000 Series
GMPHOM 2009
Double Leak Detection System
148
Type 7731S One Reinforced End Hose
Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
435
495
570
640
740
860
1000
330
385
450
515
615
725
855
300
360
420
490
590
700
830
425
485
560
630
730
850
990
821208
1073293
1419411
1829573
2450830
31321087
42011491
931220
1217312
1606436
2075615
2778892
35561175
47831622
1034232
1351329
1781460
2305655
3084951
39531257
53281744
BodyEnd
D3 D4
Body End
D3D1 D2 D4
7731S
Submerged Weight Full of Sea Water (kg)
DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
Double carcass hose developed and tested for offshore mooring applications
SUBMARINE DOUBLE CARCASS 19 bar 7000 Series
GMPHOM 2009
Double Leak Detection System
149
Type 7732S Mainline Hose
Double Carcass Hose FLEXOMARINE SAFE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
300
360
420
490
590
700
830
425
485
560
630
730
850
990
-
-
-
-
-
-
-
-
-
-
-
-
-
-
761197
1000276
1334389
1729541
2331782
29911021
40301399
857207
1127289
1501409
1952575
2630832
33811090
45721502
948215
1247302
1658427
2161606
2911878
37471154
50791599
Body End
D1D2D2
7732S
Submerged Weight Full of Sea Water (kg)
DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
Double carcass hose developed and tested for offshore mooring applications
SUBMARINE DOUBLE CARCASS 19 bar 7000 Series
GMPHOM 2009
Double Leak Detection System
150
D1 D2D2
Type 7735S Tanker Rail Hose
0,6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
300
360
420
490
590
700
425
485
560
630
730
850
-
-
-
-
-
-
-
-
-
-
-
-
765205
1005285
1340400
1738554
2341797
30031038
862215
1132298
1507419
1961588
2640846
33931106
952223
1252311
1664437
2170620
2921893
37591171
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)Body End
Submerged Weight Full of Sea Water (kg)
Double Carcass Hose FLEXOMARINE SAFE Tanker Rail Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 19 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
7735S DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
Double carcass hose developed and tested for offshore mooring applications
SUBMARINE DOUBLE CARCASS 19 bar 7000 Series
GMPHOM 2009
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
Double Leak Detection System
151
Flexomarine half floating hose with one reinforced end (first off the buoy)7810F
Flexomarine integral full-floatinghose for mainline7820F
Flexomarine integral full-floatinghose with built-in reducer7830F
Flexomarine integral full-floatinghose for tail7840F
Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)7850F
Flexomarine integral buoyancy control hose.Designed upon request7870BC
Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM
7821S
Flexomarine standard mainlinesubmarine hose with location collars7822S
Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM
7831S
Flexomarine standard mainline submarine hose7832S
Flexomarine submarine hose for tanker rail7835S
DOUBLE CARCASS 21 bar 7000 Series
DOUBLE CARCASS HOSE
DOU
BLE CAR
CASS 21 bar 7000 Series
PANTONE 255C: KNIFE
12 (FRONT)
FLOATING DOUBLE CARCASS 21 bar 7000 Series
Type 7810F First Off Buoy Hose
Double Carcass Hose FLEXOMARINE SAFE One End Reinforced for use in the first off the buoy position
Identified by one circumferencial white band at the reinforced end
The hose can be supplied with reinforcement at both ends or fully reinforced
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 5% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
NominalBore(mm) D1 D2 D3 D4
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
435
500
575
645
745
865
1005
340
400
465
530
630
740
870
425
510
600
665
850
985
1170
480
570
670
740
875
1015
1210
9521121
12411537
16262080
20672735
27833868
35345258
47147221
10841283
14121760
18462380
23513137
31634440
40236049
53788326
12081434
15731969
20532662
26183514
35204976
44806791
60009361
End Body Body End
D3D1 D2 D4
7810F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Double carcass hose developed and tested for offshore mooring applications
FLEXOMARINE SAFE
GMPHOM 2009
Weight in Air Full of Sea Water (kg)
Double Leak Detection System
155
Type 7820F Mainline Hose
Double Carcass Hose FLEXOMARINE SAFE Mainline for use as the main floating hose in the string
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
415
500
585
655
810
950
1105
470
560
660
730
835
985
1150
-
-
-
-
-
-
-
-
-
-
-
-
-
-
8421011
11041400
14661921
18122480
25323618
32634986
43686875
9531152
12491597
16572191
20492834
28674144
37025728
49697917
10571284
13861783
18372446
22713166
31814637
41146424
55348895
Body End
D1D2 D2
7820F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Weight in Air Full of Sea Water (kg)
Double Leak Detection System
156
D3D1 D2
Type 7830F Reducer Hose
Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect large mainline hose to smaller tail hose
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Continuous or as requested
NominalBore(mm)
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)
200/150(8"/6")
250/200(10"/8")
250/150(10"/6")
300/250(12"/10")
300/200(12"/8")
300/150(12"/6")
400/300(16"/12")
400/250(16"/10")
500/400(20"/16")
500/300(20"/12")
600/500(24"/20")
600/400(24"/16")
0.9
1.2
0.9
1.5
1.2
0.9
1.8
480
570
525
670
615
555
745
415
500
415
585
500
415
655
470
560
470
660
560
470
730
-
-
-
-
-
-
-
8381009
10981397
8461013
14591917
11091402
8551023
18212485
9481150
12431594
9581154
16492187
12551600
9671166
20592840
10521282
13791779
10631287
18272441
13931786
10731300
22823173
1.5
2.4
1.8
3.0
2.4
715
850
785
1000
890
585
810
655
950
810
660
835
730
985
835
-
-
-
-
-
14741924
25453625
18302493
32794996
25583636
16662196
28824152
20692849
37215740
28964165
18462450
31974646
22933182
41346437
32134660
D1 D2 9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
D3
BodyEnd End
7830F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Weight in Air Full of Sea Water (kg)
Double Leak Detection System
156
Type 7840F Tail Hose
Double Carcass Hose FLEXOMARINE SAFE Tail for use to connect the tanker rail hose and the floating string
This hose has flexiblility enouth to support seawater conditions during offloading
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% or as requested
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
420
505
595
660
815
955
475
565
665
735
840
990
-
-
-
-
-
-
-
-
-
-
-
-
8661036
11401436
15091963
19302598
26053691
33335056
9821181
12931641
17082242
21892974
29544231
37865812
10901317
14351832
18942503
24323327
32814737
42106520
Body End
D1D2 D2
7840F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Weight in Air Full of Sea Water (kg)
Double Leak Detection System
158
Type 7850F Tanker Rail Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0,6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
530
590
720
790
950
1120
365
480
540
610
760
875
585
645
775
900
1110
1340
-
-
-
-
-
-
9031073
11821478
15662020
20052674
27073793
34675190
10151214
13321680
17602294
22603045
30514328
39105936
11191346
14731870
19412550
24973393
33724828
43236633
BodyEnd
D3
End
7850F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
Double Carcass Hose FLEXOMARINE SAFE Tanker Rail for use to connect the ship's manifold and the floating hose string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs to attach pick-up and snubbing chains
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
Double Leak Detection System
159
Type 7870BC Buoyancy Control Hose
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
Weight in Air Full of Sea Water (kg)MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.9
1.2
1.5
1.8
2.4
3.0
3.6
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
360
450
505
575
700
810
970
415
510
580
650
780
900
1040
-
-
-
-
-
-
-
-
-
-
-
-
-
-
815984
10741370
14211875
17642432
24593545
31594882
42606767
9211120
12141562
16042138
19922777
27804056
35785604
48417789
10221249
13461742
17752384
22053101
30804536
39706281
53858746
Body End
Double Carcass Hose FLEXOMARINE SAFE Buoyancy Control for use as the second and third hose in the string
Rated Working Pressure: 21 bar
Minimum Bending Radius: 6D (up to 2D without any permanent deformation)
Minimum Reserve Buoyancy: Neutral or as requested
Electrical Continuity: Continuous or as requested
Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure
D1 D2D2
7870BC DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE
FLEXOMARINE SAFE
FLOATING DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
160
Type 7821S One Reinforced End Hose With Location Collars
Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
370
420
581
697
799
946
471
581
697
697
876
946
1050
435
495
570
640
740
860
1000
330
385
450
515
615
725
855
876218
1147308
1513430
1949599
2636870
33331134
44551554
997232
1303328
1713457
2219645
2997938
37951228
50891693
1103244
1441346
1894482
2456686
3313998
42041313
56511819
471
D3 D2D4 D1
7821S
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
MinimumBendingRadius
(m)Body End
D3 D4
BodyEnd
Collar Hose
Submerged Weight Full of Sea Water (kg)
DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
SUBMARINE DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
FLEXOMARINE SAFE
161
Type 7822S Mainline Hose With Location Collars
D2D1D2
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
370
420
471
581
697
799
946
471
581
697
697
876
946
1050
-
-
-
-
-
-
-
-
-
-
-
-
-
-
843211
1112294
1475414
1908573
2620834
32891078
44001472
950221
1250309
1655435
2154610
2952887
37161152
49921583
1051231
1381323
1823454
2386645
3265938
41181221
55501687
Double Carcass Hose FLEXOMARINE SAFE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems
Supplied with float location collars
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
7822S
NominalBore(mm) D1 D2
Collar Outside Diameter (mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)Body End
Submerged Weight Full of Sea Water (kg)
DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
SUBMARINE DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
162
Type 7831S One Reinforced End Hose
Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
435
495
570
640
740
860
1000
330
385
450
515
615
725
855
300
360
420
490
590
700
830
425
485
560
630
730
850
990
846214
1106302
1463423
1885590
2526855
32291120
43311537
960227
1254322
1656450
2139634
2864920
36661211
49311672
1066239
1393340
1836474
2377675
3180981
40761296
54931798
BodyEnd
D3 D4
Body End
D3D1 D2 D4
7831S
Submerged Weight Full of Sea Water (kg)
DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
SUBMARINE DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
163
Type 7832S Mainline Hose
Double Carcass Hose FLEXOMARINE SAFE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)
0.6
0.8
1.0
1.2
1.6
2.0
2.4
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
600(24")
300
360
420
490
590
700
830
425
485
560
630
730
850
990
-
-
-
-
-
-
-
-
-
-
-
-
-
-
784203
1031284
1375401
1783558
2403807
30831053
41551442
884213
1162298
1547421
2012592
2711857
34861123
47131548
977222
1285312
1709440
2228625
3001905
38631190
52361648
Body End
D1D2D2
7832S
Submerged Weight Full of Sea Water (kg)
DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
SUBMARINE DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
Double Leak Detection System
164
D1 D2D2
Type 7835S Tanker Rail Hose
0,6
0.8
1.0
1.2
1.6
2.0
150(6")
200(8")
250(10")
300(12")
400(16")
500(20")
300
360
420
490
590
700
425
485
560
630
730
850
-
-
-
-
-
-
-
-
-
-
-
-
789211
1036293
1381412
1791572
2413822
30961070
888221
1167308
1553432
2021606
2722873
34981141
981230
1290321
1715451
2237639
3011920
38751207
NominalBore(mm) D1 D2
Outside Diameter(mm)
Weight in Air Empty (kg)
MinimumBendingRadius
(m)9.1m 10.7m 12.2m
(30ft) (35ft) (40ft)Body End
Submerged Weight Full of Sea Water (kg)
Double Carcass Hose FLEXOMARINE SAFE Tanker Rail Submarine Hose for use to facilitate lifting up the string
Identified by a double circumferencial white bands at the tanker end
This hose is extremely flexible to support the curvature demanded during offloading
The fittings hose are welded lifting lugs
Each lug are tested to support Safe Working Loads as follow:
Rated Working Pressure: 21 bar
Minimum Bending Radius: 4D (up to 2D without any permanent deformation)
Electrical Continuity: Discontinuous or as requested
Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.
7835S DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE
FLEXOMARINE SAFE
SUBMARINE DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications
GMPHOM 2009
6" = 40 kN12" = 100 kN
8" = 50 kN16" = 150 kN
10" = 70 kN20" = 200 kN
Double Leak Detection System
165