Car Parking System

7/29/2019 Car Parking System

1/23


2/23

INTRODUCTION

HISTORY

SYSTEM OVERVIEW

BASIC COMPONENTS SEVEN SEGMENT DISPLAY

HARDWARE WORKING

TYPES OF AUTOMATIC CAR PARKING

ADVANTAGESDISADVANTAGES

CONCLUSION

REFERENCES


3/23

TWO TYES OF CAR PARKING

TRADTIONAL

AUTOMATED

REQUIRES LESS SPACE IN AUTOMATIC CARPARKING

REDUCES POLLUTION

TRADTIONAL CAR PARKING IS COSTLY

PROCESSS

USES 8051 MICRO CONTROLLER

USED TO OVERCOME TRAFFIC PROBLEMS


4/23


5/23


6/23

In 1920 automated car parking in U.S cities

Los angles, new york , chicago

This system is found all over Japan in 1923

The nash company created first glassenclosed version in 1933.

In later years in Europe as smart car towers

In 1983 Kent automated parking garage was

built in new york

Developed in 20th century.


7/23

Parking system is based around micro

controller and sensors

This process is quick and efficient.


8/23

Stepper motor

Stepper motor is a digital device

It follows the instruction as the computer does do

It is used for the movement of lift

U-SHAPED PHOTO SENSORS

The anode of IRED is connected to the power supply via the.

The resistor adjusts the irradiance by limiting the forward current

of the IRED.

If an object is moving between the gap the light will be blocked

and the transistor base will on, hence give an high output.


9/23


10/23

SEVEN SEGMENT DISPLAY

Used for displaying numbers and some letters

Microcontroller Port2 is use to handle the display unit.


11/23

Serial Interfacing:This unit is to display the number of cars in parking lot on the

computer.

The computer may be placed in any control room.

In null modem mode pin 7,8 and pin 6,4 are shorted with eachother.

While pin 3 is used for transmit data and pin 2 for reception


12/23

The 8051 is the brain of this whole hardware. It reads the input signals and start sending the stepping sequences to the

motor.

When the input beam of S1 is blocked motor start rotating in clockwise

direction.

S1 indicates that a car has come.

The S2 sensor is used as the gate open limit sensor

when S2=ON it means gate is completely opened.

motor start rotating in counter clockwise direction, closing now.

Finally, when S3=ON it indicates that gate is completely closed now. A display is provided at the ground floor that displays number of cars in

each floor.


13/23

An indicator with a green and red LED is kept in all the floors.

Indicate whether the lift is busy or is it ready to take the car up or

down.

seven segment display indicates that a car has entered in the

parking lot. This display is basically for the people, which are driving the car.

serial interfacing display is for the person in control room.


14/23

Lift Box Type

Park Type

Z Park

ELEPARK Elegant Park

Round Type


15/23


16/23

No digging required.

No Hydraulic parts.

Electric device

Reliable & smooth operation. Requires minimum Maintenance.


17/23


18/23

Over 5,000 parking systems in use worldwide. Less Pollution

Security from Theft and Car Damages

Save you space, time & money

Simple structure, simple operation

Speedy system, moves smoothly, not noisy.

It can be constructed and implemented in

residential areas.


19/23

Parking lots also tend to be subject to

contamination.

concentrated spots of pollutants such as

motor oil. preferred shaded parking spaces in the

summer.

planting trees because of the extra cost of

cleaning the parking lot .


20/23

Important factor in traffic areas

Automated without human being

Stepper motor plays a vital role

Seven segment display is used at every floor Sensors are used for sensing the car

This system is present in DELHI, MUMBAI,

BANGLORE


21/23

How car parking system works.

Shannon Saunders McDonald Automated

Parking Saves Space in Tight places.

Parking systems http://www.directpark.deMicrocontrollers http://www.nxp.com

www.seminarsonly.com

www.101seminartopics.com

www.parking images.com


22/23


23/23

Documents

Car Parking System