Broyhill Sprayer Products

2010 Parts Catalog

Prices effective immediately. This catalog supersedes all other Broyhill Parts Catalogs.

Form 11421-16 11/09 • F.O.B. Dakota City, NE

2010 Parts Catalog2010 Parts Catalog2010 Parts Catalog2010 Parts Catalog2010 Parts Catalog2010 Parts Catalog2010 Parts Catalog2010 Parts Catalog

Sales Order Placement: 800.228.1003 x34 FAX: 402.987.3601Broyhill.com Sales E-MAIL: [email protected]

The Broyhill Company reserves the right to make changes in prices and/or descriptions should an error be found.

-2-

INDEX

PAGEActuator Lift Parts 4Agitator (mechanical) parts 6

Ball Field Finisher Parts 4Broyhill Boom Hinge 10Boom Plugs & Springs 10Broyhill’s 80 gallon boom 10Broyhill’s 15/21 ft. turf boom 10

CleanLoad Chemical Eductor 33Couplers (Quick) 43

Electric Controls 18-22

Fittings (Nylon, Cast Iron) 44-45Foam Marker Parts 5

Gauges & Gauge Isolator 37GreensKeeper Brush Parts 3

Hose & Hose Clamps 42Hose Reels 42

Legacy Pro/Sport (Common Parts) 46Line Strainers 34-36

Manifolds 19Micro-Trak Calc-N-Acre II 23

Poly Tanks (15 to 400 gallons) 7Poly Tank Fittings 9Poly Tank Lids 8Pumps 12 Volt Spot Sprayer 27 12 Volt Foam Marker 28 12 Volt Shurflo 28 Cushman Centrifugal 29 Accumaster Centrifugal 30-32 Stainless Steel Centrifugal 33 Roller (Stadium 80 Sprayer) 32

Silhouette Trailer Parts 4Solenoid Valves 17, 21Spray Guns 38-41

Teejet Spray Tips & Nozzles 11-14 Boom Components 15

Valves (TeeValve, Ball, Gate 21-24 Unloader, Throttling)

Walk Boom Parts 5Warranty 47-48



-3-

GREENSKEEPER BRUSHNow Fits John Deere 2500 Mower

Item 2582 Greens Brush (Less Brackets & Fitting Kit) $3242.00

GREENS BRUSH PARTS LISTRef. Part No. Quan. Description Price Ea.1 MT9/350-4 2 Caster wheel, smooth, 9X3.50-4 37.702 BR11921 2 Caster fork 14.723 FVS24137P 2 Tension spring 8.934 Item 2752 2 Stationary brush kit, includes one 205.00 16” and two 24” brushes5 BR12188 2 Lower pan carrier, front 15.226 BR11920 1 Caster arm/center frame 158.927 Item 2752 1 Stationary brush kit, includes one 205.00 16” and two 24” brushes8 BR11924 4 Hinge strap mount bracket 6.599 ZZP502013 2 Dust cap 5.7110 - Bearing housing (part of brush pan)11 ZZ-Z99R16 10 Ball bearing 35.1312 BR12184 1 Motor mount 8.8513 KR-TB0130- 1 Hydraulic motor 454.04 AS-100AAB14 FRP-24-108-P 1 Chain cover 234.3015 BR12178 1 Drive sprocket 73.2916 MII-00882C- 10 ft #40 roller chain x 10 ft. 78.19 23040 MII-00882C- 1 Connecting link, #40 chain 2.17 10339 MII-00882C- 1 Offset link, #40 chain 6.90 1034017 BR12186 1 Idler tensioner 19.4318 BR12185 1 Idler bracket 34.6119 ZZAG2318A 2 Idler sprocket, 18 tooth, 1/2” bore 24.1720 BR12181 2 Pan carrier 79.7221 BR12190 2 Cover standoff 6.1322 TLT40B35-1 4 Sprocket 43.8423 - Bearing support (part of brush pan)24 BR12187 2 Brush lift (rear) 5.6025 BR12182 2 Stationary brush mount 38.7726 BR12180 1 Brush pan (includes Ref. 10 & 23) 259.51 27 AU-2708-4A 4 Yoke 13.3128 BR12183 5 Brush mount 31.5429 Item 2753 1 Revolving brush kit, includes five 205.00 16” revolving brushes30 BR11923 2 Spindle seal tube 1.2031 BR11922 2 Wheel spacer tube 4.00

Shown is Broyhill’s new trailered brush with choice of Honda or Briggs engine options.



-4-

4

7

4

3

3

3

2

2

1

1

1

BALL FIELD FINISHERREPLACEMENT PARTS

Ref. Part No. Description Price Each1 BR11816 Hitch 21.382 BR11810 Tongue 86.633 BR11812 Scarifier 379.044 PPI-26309P Rubber flail 27.305 BR11815 Side Bar 6.397 BR11814 Rear Cross Tube 25.85

ACTUATOR LIFT KIT REPLACEMENT PARTS

Ref. Part No. Description Price Each 1 BR11728 Lift frame assembly 56.96 2 BR11729 Actuator mount plate 19.62 3 BR11730L Left pivot attaching plate 22.97 BR11730R Right pivot attaching plate 22.97 4 BL-K2B10- 12 volt 6” stroke 500 lb. actuator 487.40 12V-BR-06 (was WNR9210-103-008)

13

5

7

2

46

SILHOUETTE I & II GREENS TRAILERS REPLACEMENT PARTS LISTRef./Part No. 2628A-1 2628A-2 Description Price Each1 TI13-3019SU 2 - 13X6.50-6 wheel assembly, 67.53 3/4” roller bearing TI13-2172SU - 2 18X8.50-8 wheel assembly, 110.51 1” roller bearing2 PPI-11786 2 2 Rubber strap (for models 4.41 purchased after May, 2002)3 BR11778 1 - Axle 50.18 BR11784 - 1 Axle 116.774 BR11780 1 1 Bolt on hinge pivot plate 5.425 MM1685A999 2 2 Steel latchkeeper 13.466 BR11782 1 - Tongue 60.43 BR11787 - 1 Tongue 66.57 purchased after May 2002 Item 2634 Front roller hold down kit 25.00 Item 2641-1 1 Replacement roller bearing kit for one wheel on the small greens trailer 25.00 Item 2641-2 1 Replacement roller bearing kit for one wheel on the large greens trailer (Carlisle tire) 2 1/2 Bearing 25.00 Item 2641-2-3 1 Replacement roller bearing kit for one wheel on the large greens trailer (Kendra tire) 2 1/4 Bearing 25.00 BR11781 1 Tailgate 56.96 BR11785 1 Tailgate 97.64

Note: for trailer purchased before May, 2002 needing replacement left & right latches, customer must order two PPI-

11786 rubber straps, two MM1685A999 latch keepers, two ZZCS-14X114 carriage screws, four SCB#12-14X34-SDS

self drilling screws and four ZZFW-14 1/4” flat washers.

5



-5-

11

45

789

6 2 3

97

1011

1920

65

8

31

2

4 21

18

16

12

14

13151617

WALK BOOM REPLACEMENT PARTSRef. Part Number Quan. Description Price Each1 BR11089 1 Axle frame 81.952 BR7110 2 Handle support 35.863 BR7111 2 Boom support 29.874 BR11239 1 Boom tube (male) 51.225 BR7113 1 Tee with tab, 1/2” 40.976 CN108KC 1 Brass needle valve, 1/4” 13.207 AP99019268 1 Pressure gauge, 100 psi 7.518 MT-SP-12R-12BB 2 Wheel, 12” x 1.75”, 1/2” bore 35.869 SS43LC1/2 1 Gunjet, brass 134.3510 SUBST-N4M 1 Quick coupler, 1/2”NPT 9.8011 SUBST-4 1 Quick coupler, 1/2” FNPT 27.8212 SS22252-312- 6 1/2” diaphragm check twin nozzle 8.27 500-NYB13 SS22251-311- 2 1/2” diaphragm check single nozzle 8.27 500-NYB14 SSQJ111-3/4 8 3/4” clamp 2.5715 SS8079-PP50 8 Nozzle strainer, 50 mesh 1.1416 SS25612-2-NYR 8 White cap and gasket 1.0117 SSXR8008VS 8 80 degree extended range tip, white 6.8118 CAT-RD200 1 AccuSpeed speedometer with mt. kit 78.7519 BR11168 1 Speedometer mount tube 15.6321 BR11238 1 Female boom tube, st. steel, 1” x 38” 29.60

ORDER ITEM 2612-LP - COMPLETE FOAM MARKER $787.00FOAM MARKER REPLACEMENT PARTS

Ref. Part Number Description Price Each1 BP4358 2 1/2 gal. container 9.092 SH8000-543-250 12 volt diaphragm pump 127.343 TC107CDC20 12 volt compressor 238.454 SM314/306 Check valve 18.235 BR11528 Mixer tube 61.466 SSAA144A-1-3 Solenoid valve 207.897 BRSA-2591-3 Collector bottle assembly. Includes hose, 40.37 fittings, sock and bottle8 BR11529 Replacement sock 17.92N/S SS4916-24 St. steel foam orifice (not shown) 3.03N/S BP4785 Lid for Container 3.47

Check Out Our Web

SPECIALS!broyhill.com



-6-

BROYHILL’S 1" MECHANICAL AGITATORPACKING GLAND PARTS LIST

Featured in Broyhill’s 3000 Series Fairway-LXHigh Pressure/Engine Driven Sprayers

Ref. Order No. Quan. Description Price Ea. 1 SR1610-BL 1 1/8" grease fitting 1.22 2 BR9579 1 End cap, 1 1/2" NPT 27.66 3 ZZP-105-10 2 Bronze bushing, 1" I.D. x 1 1/2” 12.89 O.D. x 1 1/4" 4 BR9580 1 Rear bushing, 1 1/2" NPT 72.87 5 BR9581 1 Packing gland, 1 1/2" NPT 118.37 6 BR9582 1 Packing material (set of three) 34.52 7 BR9583 1 Push ring, 1" I.D. x 1 1/2" O.D. x 3/4" 10.96 8 BR9584 1 Push ring plate 15.36 9 ZZHFLN-38 2 Hex flange lock nut, 3/8" .40 10 BR9585 1 End cap assembly (includes ref. 1-4) 124.96 11 BR9586 Gland assembly (includes ref. 5-9) 110.62

BROYHILL’S MECHANICAL AGITATOR PARTS

1

2

8

8

7

56

3 4

10

9

7

11

1 2 3 4 5 3 6 7 8 9

1110

5/8" PACKING GLAND ASSEMBLY

U.S. Patent No. 393069

Ref. Order No. Quan. Description Price Ea. 1 BR6975 1 Nylon packing gland assembly 100.38 ]2 BR6764 1 Nylon push ring 18.44 3 BE105-60 1 Machinery bushing, 18 ga. x 1" O.D. .32 x 5/8" I.D. 4 CPCVU1018 1 Teflon packing set (standard) 13.31 5 ZZFL-64-6 1 Brass bushing, 5/8" I.D. 13.29 6 BR6763 1 Nylon packing gland assembly 30.73 7 BCSS3324 2 Weld fastener, 3/8" x 1 1/2" 1.45 8 ZZHFLN-38 2 Lock nut, 3/8" .40 9 AICFVT-2"IDX 1 Flexible tubing, 2" I.D. x 1/4" wall x 13.89 3 1/2" long10 WT32H 2 Hose clamp, 2" stain. steel 2.26 11 PEA200 1 2" male NPT x 2" hose barb 3.01



-7-

LAWN & GARDEN POLY TANKS Order No. Gallons & Tank Lid HghtxWdthxLgth Sump Sprayer Series & Style Color Size (In inches) (In Inches) ARM-SB15WP-DR 15 gal. blow mold Yellow 5” threaded 14x31 None Spot SprayersARM-SB25WP-DR 25 gal. blow mold Yellow 5” threaded 18x34 None Spot Sprayers I-2243 55 gal. round White 5” threaded 22 1/2 dia. x 38 1/2 x 5 1/2 x 7 3-Point BR9820-60 60 gal. low profile White 10” threaded 24x34x27 3/4 None ATV Series

TURF POLY TANKSNO47015 50 gal. PCO White 10” 19x20x38 YES 2492 Series Mini 50 I-2447-120P 120 gal. low profile White 12” 20 1/4x45x48 1/2x6x13 HydraMaster/TerraMaster/ Fairway-LX I-2447-120P-MA 120 gal. low profile White 12” 20 1/4”x45x48 1/2x6x13 HydraMaster/TerraMaster/ w/mech.agitator fittings Fairway-LX I-1912A 150 gal. round White 8” 30 dia x 44 1/2x4 1/2x16 3/4 LawnMate(TP)

I-2447-160P 160 low profile White 12” 27x45x48 1/2x6x13 HydraMaster/TerraMaster/ Fairway-LXI-2447-160P-MA 160 low profile White 12” 27x45x48 1/2x6x13 HydraMaster/TerraMaster/ w/mech.agitator fittings Fairway-LX

I-2024A 200 round White 8” 32diax68 1/2x41/2x163/4 LawnMate (TP)I-2524 210 low profile Yellow 12” 28 1/2X51X53 6X10 1/2X1 1/2 AccuMaster/JD

I-1914A 300 round White 8” 38 dia. x 76 1/2x4x12 3/4 LawnMate (TP)I-2386-ProTech 300 Low Profile White 16” Locking 38 1/2X26 1/2X60 1/2X6X13 Pro-Tech (Fairway)I-1991 400 round White 10” 42 dia. x 80 1/2x4x12 3/4 LawnMate (TP)

BROYHILL’S REPLACEMENT TANKS



-8-

TANK LIDS, REPAIR KITS & STRAINER BASKETSTANK REPAIR KITS

FIBERGLASS TANK REPAIR Kit for minor fractures or bad areas. Contains fiberglass mat, pint of polyes-ter resin and bottle of catalyst for converting the liquid resin to a solid. Order No. RA5073A $40.51

POLY-PATCH KIT for fast and permanent repairs of poly tanks. Apply to damaged areas and cover with patch. Tank may be refilled in 20 minutes.Order No. NO67412 $26.58

POLY WELDING ROD repairs cracks, small holes in poly tanks by cutting the crack into a groove and melt-ing the tank wall and welding rod together with a sol-dering gun 5/32" dia rod x 4 f t long. Order No. S037180000 $14.04

TANK AIR GAP FILLERBroyhill's optional air gap tank filler meetsCalifornia code for anti-siphon tank filling. Order No.I-2413 $126.00

STRAINER BASKETSFits 10" fillwell opening on Broyhill and Solar tanks with a flange at the bottom edge of the fillwell. Add BRN-188 adapter ring to support basket in the 10" fillwell of Raven fiberglass or poly tank.Order No. BRN-105 basket $23.46Order No. BRN-188 adapter ring $36.51

Fits 10" dia fillwell of fiberglass or poly tanks to strain the liquid when filling the tank. Basket has 14 mesh screen molded into a nylon frame.Order No. NO67375 $63.34

16" strainer basket for fiberglass tanks. Basket removes for cleaning and can be left in the tank with the fillwell lid on.Order No. NO67374 $51.81

JOHN DEERE/ACCUMASTER 12” strainer basket used in 200 gallon tank assembly for ACCUMASTER sprayer.Order No. PE300120 $27.00

Pro-Tech 300 gal. tank 16” strainer basket Order No. HY300126 $28.50

5" TANK LIDS & LOCKING RINGS5” Lid, flat with top bar.

Order No. NO67002 $20.89

5” PCO 50 gal. tank lid (for Raven tanks made before January 1, 2001). Lid is black with inside

threads and 2 ears (Mickey Mouse Style).Order No. NO68330 $20.89

5” PCO 50 gal. tank lid (for Norwesco/Raven tanks made after January 1, 2001). Lid is black,

threaded. Order No. NO67274 $23.23

8” TANK LID8” Screw on lid for 14 and 25 gallon FM spot

sprayer tanks.Order No. ARM-10522 $17.36

10" TANK LIDS & LOCKING RINGS10" lid flat-no threads for Poly Tanks.

Order No. NO67071 $20.03

10” lid for Broyhill’s Fairway-LX 3030 tank.Order No. ARM-10533 $33.65

12" TANK LID12" lid, breather and rim, for 80 gallon poly tank.

Order No. PE352040-1 $33.00

12" screw on lid for Heritage 110 gallon elliptical tank.

Order No. PP-SP993 $54.75

12” lid threaded, vented.Order No. ARM-10527 $45.21

16" TANK LID & FILLWELL16" lid for Broyhill's Terramaster,® Hydramaster

sprayers. Includes 4" center cap with double air breathers and threads for secured

fit and leak resistance.Order No. PE352060-1 $35.00

Replacement 4" center cap for 16" lid. Order No. NO60019 $11.86

16” Lid for 750/1000GAL AG Sprayer, Threaded w/breather.

Order No. NO60038 $33.39

16” Hinged Locking Lid for 300 gallonPro-Tech Sprayer

Order No. HY356061 $70.50



-9-

Plumbing to Pump

Reducer

2” Double Threaded Fitting

End Cap

End CapSparger Tube Fitting

TANK FITTINGS POLY TANK FITTINGS

Order No. Description Price Ea.Poly Tanks NO67158 1/2” single thread fitting 16.68 NO67161 1/2” double thread fitting 16.68 NO67111 3/4” single thread fitting 16.68 ARM-10484 3/4” double thread fitting 10.94 NO67159 1” single thread fitting 16.68 NO67162 1” double thread fitting 16.68 NO67114 1 1/4” single thread fitting 20.03 NO67155 1 1/4” double thread fitting 20.03 NO67156 2” single thread fitting 20.03 NO67153 2” double thread fitting 20.03 NO67170 3” single thread fitting 43.42 NO67169 3” double thread fitting 45.12

Installation hole size: 1 5/8” for 1/2”, 3/4” and 1” NPT fittings;2 3/4” for 1 1/4”, 1 1/2” and 2” NPT fittings.

Replacement Nylon Washers for Withdrawal Fittings*NO67343 Washer for 1 1/4”, 1 1/2”, 2” Anti-vortex & 3.17 end plug fittings (Min. Order 100/pk)

EPDM O-ringsNO67337 O-ring for 1/2”, 3/4” & 1” poly fittings 3.17*NO60404 O-ring for 1 1/4”, 1 1/2” & 2” anti-vortex poly fittings 3.17 (min. order 100/pk)

ANTI-VORTEX FITTINGSOrder No. Size/Description Price Ea.ARM-10918/347007 1 1/4” Center Vortex Fitting 18.83 with Metal Clip NO67151 1 1/2” poly tank anti-vortex 20.03

SPARGING LINE FITTINGSThese fittings are designed to enable installation of a 2” (2 3/8” O.D.) pipe into a poly tank for use as a sparging line.Order No. Size/Description Price Ea.NO67149 Sparger fitting for poly tank 34.26

Nut

Nut

Washer

Grommet

Washer

FittingBody

FittingBody

O-Ring

Fittings Poly Tanks

Plumbing to Pump

Reducer

2” Double Threaded Fitting

End Cap

End CapSparger Tube Fitting

Note: with the closing of Solar Tanks and the buy out of

Raven tanks, some fittings and lids are no longer available.

*Note: Norwesco fi ttings/O-Rings come in bulk packing only.



-10-

1

76

45

2

3

BOOM PARTS FOR BROYHILL BOOMSBOOM PLUGSRemovable boom plugs facilitatecleaning nozzle tubes.

Order No. Description Price Ea.BRM-61 3/4" boom plug 5.07BRM-64 7/8" boom plug 10.64

BOOM SPRINGS

Order No. Description Price Ea.BRM-6 3/8" x 1 1/6" OD x 10" long 16.89BRM-4274 1 3/8" OD x 25" long 101.36SCB-G172-11/2 S-hook 1 1/2" 2.65

BROYHILL’S BOOM HINGEFour-way hinge for Broyhill's booms.

Patented spring loaded hinge castingassembly allows forward or vertical

folding on outer boom tubes fortransport and enables break-away

action if an outer boom strikes an obstacle.

Ref. Order No. Description Price Ea. BRM-2C Complete hinge, cast iron, 245.80 includes ref. no. 1-61 BR1511C Cast iron outer hinge yoke (for 2C) 61.462 BRM-10C Outer hinge, C.I. (no hardware) 68.403 BRM-9 Hinge plate 16.894 BRM-6 10" boom spring 16.895 ZZHHS-12X712 Hex screw, 1/2" x 7 1/2" 3.226 ZZLN-12 Lock nut, 1/2" .547 ZZM-79 U-bolt, 5/16" x 1 1/2" x 1 3/4" 4.83N/S ZZHFLN-516 Hex flange lock nut .40

FIBERGLASS HINGE PARTS (LIMITED QUANTITY)

BRM-2A Complete fiberglass hinge 233.75 BRM-10F Fiberglass outer hinge, no 56.32 hardware.

REPLACEMENT BOOM PARTS FOR BROYHILL’S 80 GALLON SPRAYER 10 FT. BOOMS

Part No. Description Price Ea. SS22251-311-500-NYB Single hosetail nozzle body, 1/2” 8.27 SS22252-312-500-NYB Double hosetail nozzle body, 1/2” 8.27 SS8079-PP50 50 mesh strainer 1.14 SSXRC8004VS Flat spray tip/cap combo 7.81 SSQJ111-3/4 3/4” round clamp 2.57

REPLACEMENT BOOM PARTS FOR BROYHILL’S 15 & 21 FT. LOW PROFILE BOOM

Part No. Description Price Ea.SS22252-312-750-NYB Double hose tail diaphragm check nozzle body, 3/4” 8.27SS22251-311-750-NYB Single hose tail diaphragm check nozzle body, 3/4” 8.27SS25600-1-NYR Black cap & gasket for Item 2567 21 ft. boom 1.15SS25612-1-NYR Black cap & gasket for Item 2566 15 ft. boom 1.01SS8079-PP50 Strainer, 50 mesh 1.14SSTFVS5 Turbo FloodJet tip for Item 2567 21 ft. boom 12.90SSXR8004VS XR flat spray tips for Item 2566 15 ft. boom 6.81SSQJ111SQ114 1 1/4” square vari-spacing clamp 2.57



-11-



-12-



-13-



-14-

QJ363B QJ365B

QJ365F QJ364F

19349 19350

2225222251

QJ111QJ111SQ

QJ363F QJ365F

QJ17560A QJ7421

QJ364F

QJ363B QJ365B

QJ365F QJ364F

19349 19350

2225222251

QJ111QJ111SQ

QJ363F QJ365F

QJ17560A QJ7421

QJ364F

RAINDROP/TURBO TURFJET CROSS REFERENCE DELAVAN RAINDROP TEEJET TURFJET ORDER NUMBER PRICE ORDER NUMBER PRICE DL35654-1/RA2 $ 9.30 SS1/4TTJ02-VS/Yellow $16.70 DL35654-2/RA4 9.30 SS1/4TTJ04-VS/Red 16.70 DL35654-3/RA5 9.30 SS1/4TTJ05-VS/Brown 16.70 DL35654-4/RA6 9.30 SS1/4TTJ06-VS/Gray 16.70 DL35654-5/RA8 9.30 SS1/4TTJ08-VS/White 16.70 DL35654-6/RA10 9.30 SS1/4TTJ10-VS/Light Blue 16.70 DL35654-7/RA15 9.30 SS1/4TTJ15-VS/Light Green 16.70

QUICK TEEJET NOZZLES FOR DRY BOOMSMULTIPLE NOZZLE HOSE SHANK DIAPHRAGM CHECK VALVESOrder No. Description Price Ea.SSQJ363C-*-1-NYB -500, -750, -1000 nozzle body with single hose shank $19.58SSQJ363C-*-2-NYB -500, -750, -1000 nozzle body with double hose shank 19.58SSQJ364C-*-1-NYB -500, -750, -1000 nozzle body with single hose shank 19.58SSQJ364C-*-2-NYB -500, -750, -1000 nozzle body with double hose shank 19.58SSQJ365C-*-1-NYB -500, -750, -1000 nozzle body with single hose shank 19.58SSQJ365C-*-2-NYB -500, -750, -1000 nozzle body with double hose shank 19.58SSQJ363F-1000-NYB -1000 nozzle body with 3 outlet single 23.46SSQJ364F-1000-NYB -1000 nozzle body with 4 outlet single 23.46SSQJ365F-1000-NYB -1000 nozzle body with 5 outlet single 23.46

HOSE SHANK DIAPHRAGM CHECK VALVESSS19349-211-*-NYB -406, -540, -785 single hose shank with dia. check valve 10.01SS19350-212-*-NYB -406, -540, -785 double hose shank with dia. check valve 10.01SS19351-213-*-NYB -406, -540, -785 triple hose shank with dia. check valve 10.01SS22251-311-*-NYB -375, -500 -750 single hose shank with dia. check valve 8.27SS22252-312-*-NYB -375, -500, -750 double hose shank with dia. check valve 8.27

VARI-SPACING CLAMPSSSQJ111-* 1/2, 3/4 or 1” vari-spacing clamp - specify size 2.57SSQJ111-11/4 1 1/4” vari-spacing clamp 2.57SSQJ111SQ-* 3/4, 1, 1 1/4 or 1 1/2” vari-spacing clamp - specify size 2.57

QUICK TEEJET NOZZLE SYSTEMS FOR WET BOOMS

MULTIPLE NOZZLE BODIES WITH FERTILIZER OUTLET FOR WET BOOMSSSQJ363C-1/2, 3/4 or 1”-NYB Split eyelet diaphragm check valve - spec. size 15.66SSQJ364C-1/2, 3/4 or 1”-NYB Split eyelet diaphragm check valve - spec. size 15.66SSQJ365C-1/2, 3/4 or 1”-NYB Split eyelet diaphragm check valve - spec. size 15.66SSQJ363F-1-NYB 1” split eyelet diaphragm check valve 19.56SSQJ364F-1-NYB 1” split eyelet diaphragm check valve 19.56SSQJ365F-1-NYB 1” split eyelet diaphragm check valve 19.56

TRIPLE NOZZLE BODIES FOR WET BOOMSSS24216A-1/2, 3/4 or 1”-NYB Triple nozzle body - specify size 20.98

SPLIT EYELET DIAPHRAGM CHECK VALVESSSQJ17560A-1/2, 3/4 or 1” assembly - specify size 4.37SSQJ7421-1/2, 3/4 or 1” assembly - specify size 3.93

REPLACEMENT CAPS FOR DELAVAN CONVERSION TO TURFJET NOZZLES

SSQJ4676-1/8-NYR Black cap & gasket $3.82SSQJ4676-1/4-NYR Black cap & gasket $3.82SSQJ4676-45-1/4-NYR 45o cap & gasket $4.34SSQJ4676-90-1/4-NYR 90o cap & gasket $4.34



-15-

TEEJET BOOM COMPONENTS SSQJ8360-NYB Diaphragm check valve quick TeeJet nozzle body $6.89 SSQJ8355-*-NYB 1/8” or 1/4” dia. check valve quick TeeJet nozzle body 10.13 SSQJT-NYB Quick TeeJet adapter fits TeeJet bodies using #1235 cap 4.99

SSQJ1/4TT-NYB Quick Teejet nozzle body adapter 2.66 SSQJ1/4T-NYB Quick TeeJet nozzle body adapter 2.66 SSQJT-NYB Quick TeeJet nozzle body adapter 4.99 SS22674-1/4-NYB Quick TeeJet 450 nozzle body adapter 2.66

SSQJ8600-1/4-NYB Quick TeeJet single swivel 7.17 SSQJ8600-2-1/4-NYB Quick Teejet double swivel 8.64

SS19845-PP Polyethylene TeeJet strainer, specify mesh 1.42 SS5053-*-* Brass with stainless steel screen, specify mesh 2.76 SS6051-SS Teejet strainer, stain.steel throughout, specify mesh 11.00 SS8079-PP-* Teejet strainer, poly with st. steel screen, specify mesh 1.14 SS4067-SS-* Teejet cup strainer, specify mesh 1.50 SS4514-* Slotted strainer, brass, specify mesh 1.29

SS4193A-* Brass check valve, specify mesh 4.87 SS4193A-*-SS Stainless steel check valve, specify mesh 19.27 SS4193A-*-PP Poly check valve, with viton ball, specify mesh 3.86 SS11750 Brass check valve, specify mesh 6.94 SS11750-SS Stainless steel check valve, specify mesh 20.65 SS11750-PP Poly check valve, specify mesh 5.48

CONVERT YOUR LURMARK NOZZLES TO TEEJET ASSEMBLIES

Lurmark Number Convert to TeeJet NumberLU450Q2621 not needed with TeeJetLU450Q2626 SSQJ111-3/4LU450Q2622 SS18638-111-540-NYBLU450Q2624 SS18638-112-540-NYBLU32100050 SS8079-PP50LU15M1196 Part of TeeJet capLUAN3 SSTK3LU15MO1545 SS25608-1-NYR

LU450Q2621Wing Nut

LU450Q2626Clamp

LU450Q2622½” single nozzle body

LU32100050strainer

LU15M1196washer

LU15M01545cap

LUAN3 tip

LU450Q2624½” double nozzle body

Single Nozzle BodyAdaptors with Chemsaver

Nozzle Body Adaptors

Swivels

Teejet Strainer Assemblies

Teejet Check Valves



-16-

TYPICAL PLUMBING SET UP USING SPRAYING SYSTEMS 144 SOLENOID VALVES AND 744 CONTROL BOX

Ref. Order No. Description Price Ea.1 SSAAK744A-100L-33S Spraying Systems control-Liquid Gauge 497.002 SS21720-8 Extension cable, 8 ft. 43.003 SS21725-8 End cable, 8 ft. 42.004 AA244C 3/4” Electric reg valve 152.145 ZZRB-14-18 1/4” x 1/8” reducing bushing 2.806 SUN4FC4 Tubing coupler, 1/4” FNPT x 1/4” tube 4.767 SUNB4-035X180 Nylon tubing 1/4” OD x 15 ft. long 26.388 FPPMCD-21-04 Elbow 24.059 FPPMCD-10-04 Coupler body with check valve 17.4210 SS23800A-1/4 Gauge isolator kit 111.3511 ZZCN-14 Close nipple, 1/4” 2.0812 SSAA144A-3 Solenoid valve assembly, 3 valves 466.30 3/4” inlet x 1/2” outlet13 SS21478-2 Power cable assembly 30.0014 ZZCN-34 Close nipple, 3/4” 1.8215 ZZRTW-34-14-34 Reducing tee, 3/4” x 1/4” x 3/4” 9.6716 PT3/4B-SEMI- 3/4” female coupler x 3/4” MNPT 19.5417 ZZSE-34 3/4” street elbow, cast iron 6.8518 PT3/4A-SEMI- 3/4” coupler 14.3319 - Pump control box -20 GR-L85-3/4X108 3/4” black hose x 9 ft. long 15.3621 GR-L85-3/4X24 3/4” black hose x 2 ft. long 3.4122 PEEL1234 1/2” x 3/4” nylon elbow .78

1

2 57

13

19 8

910

11

14

14

20

20

22

21

4

17

18

3

15

1612

6

Check Out Our Web




-17-

SPRAYING SYSTEMS 144 SOLENOID VALVES12 Volt D.C. solenoid valves for remote electric on-off control of boom or nozzle lines. 144 Series valves feature polypropylene bodies with 1/2” female NPT outlet and two 3/4” female NPT inlets. Pressure drop of only 5 psi with 10 gpm flow.

Order No. No. of Valves Flow PriceSSAA144A-1 1 valve 1 way flow 152.78SSAA144A-2 2 valve 1 way flow 309.51SSAA144A-3 3 valve 1 way flow 466.30SSAA144A-1-3 1 valve 3 way flow 207.89

Order No. Description PriceSSPK-AB144A-1-KIT For new style 144A-1 valve 27.42SSPK-AB144-1-KIT For old style 144-1 valve 27.42SSPK-AB144A-1-VI-KIT For 144A-1 with viton seal 41.02SSPK-AB144A-1-3-KIT For 144A-1-3 3 way flow valve 31.47

NEW STYLEPARTS LIST FOR SSAA144A-1 SOLENOIDNEW STYLE DOES NOT HAVE A BOOT ON THE END OF THE VALVE

Ref. Order No. Description Price1 SS14933-SS Screw (2 required) 1.502 SS15168-IENP Jam nut 5.103 SS15166-I Coil cover 4.464 SS15161-I Armature stop 10.925 SS15163-NYB Coil assembly, nylon 50.556 SS14927-3-1 Strap 8.307 SS15169-302SS Washer 1.958 SS15164-NYB Upper diaphragm housing (black) 5.309 SS15170-IENP Armature 20.1610 SS15167-302SS Spring 5.3211 SS14813-1-IENP Retaining ring 1.9512 SS36101-R Diaphragm, EPDM (2 req’d) 7.13 SS36101-VI Opt. viton diaphragm (2 req’d) 16.1113 SS14807-SS Seat washer retainer 16.3114 SS14802-R Seat washer, EPR rubber 5.51 SS14802-VI Seat washer, viton (optional) 19.4315 SS14811-SS Spacer, SS 4.6816 SS14801-PP Body, polypropylene (black) 14.4817 SS14812-SS Stem 18.4518 SS14806-SS Washer 5.3619 SS15162-SS Lower diaphragm piston 10.2520 SS15165-NYB Lower diaphragm housing (black) 19.8921 SS14819-SS Screw (4 required) (price each) 1.7722 SS21737-NYB Connecting nipple, nylon, black 4.00 for use on multiple units only

OLD STYLEPARTS LIST FOR SSAA144-1 SOLENOID

(WITH BOOT) Ref. Order No. Description Price 1 *SS14809-IENP Armature stop 9.17 2 SS14814-IENP Jam nut 5.28 3 SS14933-SS Screw (2 required) (price each) 1.50 4 *SS14926-1 Coil cover - No longer Available - 5 SS14927-3-1 Strap 8.30 6 *SS14810-1-NY 12 volt coil assembly 42.54 7 *SS14815-IENP Armature* - No Longer Available - 8 *SS14816-IENP Upper diaphragm housing - - No Longer Available 9 SS14803-302SS Spring 6.43 10 SS14813-IENP Retaining ring 2.00 11 SS14818-R Diaphragm, (EPDM 2 required) 10.49 12 SS14806-SS Washer (2 required) 5.36 13 SS14807-SS Seat washer retainer 16.31 14 SS14802 Seat washer, EPDM rubber 5.51 15 SS14811-SS Spacer 4.68 16 SS14812-SS Stem 18.45 17 SS14801-PP Body, polypropylene 14.48 18 *SS14808-SS Lower diaphragm housing - No Longer Available 19 SS14804-1-I Bottom plate 5.20 20 SS14819-SS Screw (4 required) 1.77 21 *SS14817-SS Lower diaphragm piston - No Longer Available 22 SS14878-R Boot, EPDM rubber 7.06 23 *SS8432-BU Gasket, Buna-N 2.35 (for 144-2 & -3) 24 *SS8343-NY Close nipple, nylon 3.59 (for 144-2 & 3)

REPAIR KITS FOR 144 VALVES



-18-

TEEJET TECHNOLOGIES 744 - 844 - 855ELECTRIC SPRAYER CONTROLS

TeeJet 744A sprayer control sealed heavy duty switches, keeping them free from dust and moisture. LEDs indicate power ‘on’ status for each boom section, 2 1/2” gauge (available in dry or liquid filled). The 744A is capable of controlling either solenoid or ball-type boom control valves. (Control box only, no solenoid valves or pressure regulating valve included).Manual 3 switch control with liquid filled 100psi gauge (no valves).Order No. SSAA744A-100L-3 (90-50149) $262.00

MANUAL CONTROL KITSTeeJet’s K-Series kits provide the necessary components to upgrade our sprayer for remote application control. Kits are packaged to include a control console, a pressure regulator valve, cables and required hardware.744A-100L-3 control with liquid filled gauge and 3/4” pressure regulator valve.Order No. SSAAK744A-100L-30S (90-50161) $310.00

744A-100L-33S control unit with liquid filled gauge, 3/4” pres-sure regulating valve and three 144A DirectoValve boom section valves.Order No. SSAAK744A-100L-33S (90-50163) $497.00



-19-



-20-



-21-



-22-

RAVEN ELECTRIC CONTROL SYSTEMSSCS-11 CONTROL SYSTEM

Remote control system with gauge and pressure regulator for one 12 volt solenoid valve (not included). Kit includes nylon regulator valve, one 100psi gauge, 16 ft. signal cable, 8 ft. bat-tery cable, control box with toggle switches for regulator and solenoid valve. Order No. RASCS-11 (070-0159-011)

SCS-103 CONTROL SYSTEMRemote control system with 8 ft. control to valve cable and fused control box with toggle switches. Does not include gauge or regulator valve or 3 solenoid boom countrol valves.Order No. RASCS-103 (070-0159-103) *Not Subject To Normal Dealer Discount

SCS-440 CONTROL SYSTEMUnit includes a 1” poly control valve, 1-55 gpm poly flow meter and wheel drive speed sensor. For use with chemicals and liquid fertilizer. Operator can program two different application rates, flip a switch to rate 1 or rate 2 or switch to manual for spot spraying. Operator has instant access to volume left in tank, time, total area worked, total volume applied, field area, vehicle speed, distance traveled, area worked per hour and gallons per minute.Order No. RASCS-440-10WD-055 (944810WD055) *Not Subject To Normal Dealer Discount

CALL BROYHILL SALES DEPARTMENTFOR CURRENT RAVEN PRICING

RAVEN BUTTERFLY VALVEYour choice of 3/4” or 1” nylon butterfly valve. Features high torque 12 volt DC motor.For use with Raven control systems. Order No. RA063-0159-001-3/4” valve Order No. RA063-0172-125-1” valve *Not subject to normal discount

RAVEN FLOW METERSRFM-55 flow meter delivers 1 to 55 gallon per minute and fea-tures polypropylene materials suitable for chemicals and liquid fertilizers. Order No. RA063-0171-793*Not subject to normal discount.

RAVEN RADAR SPEED SENSORSFOR USE WITH THE SCS440 UNITRadar gun & cable Order No. RA063-0159-836 Wheel drive speed sensor Order No. RA063-0159-484 Drive shaft speed sensor Order No. RA063-0159-730Radar speed sensor without radar gun. *Specify TRW, Dickey-John or Magnavox when ordering.Order No. RA063-0159-specify type - POA*Not subject to normal discount.

RAVEN WHEEL DRIVE SENSOR FORUSE WITH THE SCS500 UNITWheel drive speed sensor for use on SCS500 unit. Order No. RA063-0159-539 *Not subject to normal discount

MICRO-TRAK NEW CALC-AN-ACRE II

MICRO-TRAK’S ELECTRONIC WARRANTY IS HANDLED DIRECTLY THROUGH MICRO-TRAK. PLEASE CALL 1-800-328-9613

Order No. MTR01000 - $337.00*Not Subject to Normal Discount



-24-

TEEVALVESSPRAYING SYSTEMS 8-WAY TEEVALVES

Selective on-off control of all or any of the individual sections of a three section boom. Pressures up to 300 psi. Order No. Inlet Boom Accessory Price Connection Outlets OutletsSS17L 3/4” 3/4” NPT 3/4” NPT 127.60SS17Y 1” 1” 1” 127.60

PARTS LIST FOR TEEVALVESRef. Order No. Description Price1 SS8012-1/2 Cotter pin 1.502 SS6849-IZP Handle 9.003 SS7206-ICP Rivet 5.344 SS6976-IZP Handle washer 3.825 SS12128-IZP Selector shield 5.936 SS12127-CE Selector shield tip 3.937 SS12129-CE Spacer 5.288 SS6972-SS Main stem 10.619 SS20607-IZP *Screw (8 required - priced each) 2.18 (was SS7980-IZP)10 SS12126-AL Cover plate 49.8011 SS6975-BU Gasket, Buna-N 8.5712 SS5809-LEA Packing (5 required - priced each) 1.5013 SS12130-SS Packing gland 7.6014 SS7254-SS Main spring 3.8015 SS7987-SS Washer 1.5016 SS6971-AL Selector clamp 4.2817 SS6973-SS Guide nut 5.3318 SS6959-SS Valve spring (3 required - price each) 3.2019 SS6956-CE Valve stem (3 required - price each) 3.9520 SS6934-3/4AL Body, 3/4” inlet x 3/4” side ports 58.0121 SS6958-POL Seat plate (3 required - priced each) 6.5522 SS7902-AL Outlet adapter, 3/4” female GHT (3 req’d) 9.64

TYPICAL TEEVALVE (MANUAL CONTROL) PLUMBING ONBROYHILL’S TERRAMASTER® SPRAYER WITH LOW PROFILE BOOM

Ref. Part No. Quan. Description Price5 PEA34100 1 Hose insert, 3/4” NPT x 1” hose barb .696 ZZTW-34 1 Tee, 3/4” 6.647 ZZCN-34 2 Close nipple, 3/4” iron 1.828 CO70-104-01 1 Brass ball valve, 3/4” 47.699 ZZN-34x2 1 Nipple, 3/4” x 2” 2.6610 ZZSE-34 1 Street elbow, 3/4” 6.8511 SS17L 1 TeeValve, 3/4” 127.6012 AP99019283 1 Liquid filled pressure gauge, 200 psi 23.3713 ZZHCS-14X1 2 Hex cap screw, 1/4” x 1” .2414 ZZFW-14 4 Flat washer, 1/4” .4015 ZZLW-14 2 Lock washer, 1/4” .4016 ZZHN-14 2 Hex nut, 1/4” .4017 PEF34 2 Nylon plug, 3/4” .4418 PEM34 1 Close nipple, 3/4” nylon .5019 PEEL34 2 Hose insert elbow, 3/4” .8520 PEA34 1 Hose insert, 3/4” .5021 PEEL34F 1 Hose insert elbow, 3/4” female 1.9622 GR-L85-3/4 1 Right feeder hose, 3/4” x 210” long 29.8723 GR-L85-3/4 1 Center feeder hose, 3/4” x 132” long 18.7724 GR-L85-3/4 1 Left feeder hose, 3/4” x 210” long 29.8726 WT16H 6 Hose clamp 1.81

Repair kit for 17 Series Valve includes cotter pin, rivet, handle washer, selector shield tip, screws, gasket, packing, seat plate. Order No. SSAB17-KIT $35.40

REPAIR KIT FOR TEEVALVE



-25-

VALVESPISTON TYPE RELIEF

PISTON TYPE/PRESSURE RELIEF REGULATING VALVESBy-passes excessive liquid and adjustable to maintain control of line pressure. 1/2” or 3/4” male NPT inlet and female outlet connections. For pressure to 100 psi and features 1/4” port for pressure gauge

Order No. Inlet & Outlet NPT PriceSS23120-PP-1/2 1/2” NPT 34.00SS23120-PP-3/4 3/4” NPT 34.00

SPRAYING SYSTEMS 6815 SERIES PISTON TYPE RELIEF VALVERated for pressures up to 300 and 700 psi. Choice of 1/2” or 3/4” pipe thread connections (male NPT inlet, female NPT outlet). Brass, Aluminum or Hardened Stainless Steel

Order No. Male Inlet Female Outlet Pressure Mat’l PriceSS6815-1/2- 1/2” NPT 1/2” NPT 300 PSI Brass 72.49SS6815-3/4- 3/4” NPT 3/4” NPT 300 PSI Brass 72.49SS6815-G 1/2” NPT 1/2” NPT 700 PSI Brass 133.31SS6815-1/2-HSS-700 1/2” NPT 1/2” NPT 700 PSI Hard. SS 102.42

Includes brass spring retainer, Buna-N gasket, stainless steel inside & outside springs (300 or 700 psi according to valve rating), brass guide seat.

Order No. PriceSSAB6815-300-KIT 18.23SSAB6815-700-HSS-KIT 24.12SSAB6815G-700-KIT 21.73

REPAIR KITS

Check Out Our Web




-26-

QUARTER TURN/FULL FLOW BALL VALVES

400 PSI Working Pressure - Two Way flowOrder No. Female NPT PriceCO70-102-01 3/8” 24.79CO70-103-01 1/2” 30.18CO70-104-01 3/4” 47.68CO70-105-01 1” 58.42CO70-106-01 1 1/4” 82.26CO70-107-01 1 1/2” 127.57CO70-108-01 2” 153.79

GLASS FILLED POLYPROPYLENE BALL

VALVES75 PSI Maximum Operating Pressure

Order No. Port Size PriceTEV-050 1/2” 34.45TEV-075 3/4” 35.45TEV-100FP 1” 39.09TEV-125 1 1/4” 39.09TEV-150 1 1/2” 48.28TEV-200FP 2” 70.75

NYLON PLASTIC GATE VALVESOrder No. Female NPT PSI Flow PriceBG1091 1/2” 200 One way 9.49BGG2002 3/4” 300 Two way 18.06BGG2003 1” 300 Two way 20.45BGG2004 1 1/4” 300 Two way 27.70BGG2005 1 1/2” 300 Two way 40.91

NYLON RELIEF VALVESLow Pressure Rating

Order No. Female Inlet Male Outlet PriceHA2064-5 1/2” NPT 3/4” NPT 24.30HA2066-5 3/4”NPT 3/4” NPT 24.30

1/4” BRASS NEEDLE VALVEOne Way Flow

Order No. Male Inlet Female Outlet PriceCN108KC 1/4” NPT 1/4” NPT 13.19

VALVES

NYGLAS BALL VALVESQuarter Turn - Two Way FlowOrder No. Female NPT PSI PriceMC1212NGF 1/2” 300 18.24MC3434NGF 3/4” 300 18.24MC1010NGF 1” 200 30.99MC114NGF 1 1/4” 200 32.23

ACE VALVTEC SERIES16 BALL VALVE

Spring Loaded Ratchet Handle400 PSI Working Pressure

Order No. Female NPT PriceAC090640 1/2” 260.00AC090660 3/4” 320.00AC090680 1” 335.00

VALVTEC BALL VALVE REPAIR PARTS CAN BE FOUND IN THE ACE VALVE

PARTS PRICE LIST



-27-

SHURFLO 12 VOLT DIAPHRAGM PUMPS

PARTS BREAKDOWN FOR SHURFLO 8000-543-236 (SPOT SPRAYER) PUMP

Ref. Part No. Quan. Description NET Price1 SH94-380-02 1 Complete pump head 109.622 SH94-375-06 1 Switch assembly 24.943a SH94-374-16 1 Not Available3b Not available4 SH94-379-500 1 Not Available5a Not available By-pass valve assembly5b SH94-390-05 1 Non by-pass valve assembly 39.116 SH94-396-06 1 Not Available7 SH94-395-03 1 Not Available8 SH11-111-00 1 Motor

*NET Pricing shown on pump parts (no discount)

1.4 gpm, viton valves, santopreme diaphragm 60 psi, demand switch, 3/8” FPT ports. This pump is used on Broyhill’s FM series spots sprayers.

Order Number SH8000-543-236 $130.76 retail

PARTS LIST FOR SPOT SPRAYERS

Ref. Part No. 15 Gal. 25 Gal. Description Price1 ARM-SB15WP-DR X - 15 gal. blow mold poly tank, yellow 50.49 ARM-SB25WP-DR - X 25 gal. blow mold poly tank, white 61.352 ARM-10522 X X Screw on 5” tank lid 17.363 SH8000-543-236 X X 12 volt pump 130.764 SS50800-15-PP-406-X8 X X Spray gun with adjustable conejet tip (Replaces 15.75 PH275-190 and SS38700-3/8-PP-X8 spray guns)5 GR-V3020-3/8X108 X X 15 ft. spray gun hose 12.90

2

4 & 5

1

3



-28-

SHURFLO 12 VOLT DIAPHRAGM PUMPS

PARTS BREAKDOWN FOR SHURFLO 2088-313-145 PUMP

Ref. Part No. Quan. Description NET Price1 SH94-236-15 1 Complete pump head 149.752 SH94-231-05 1 Upper housing/switch assm. 50.893 SH94-230-55 1 Switch assembly 28.734 SH94-237-05 1 Check valve assembly 21.275 SH94-231-30 1 Upper housing 12.666 SH94-232-05 1 Valve assembly 45.447 Not available8 Not available

*NET Pricing shown on pump parts (no discount)*

3.6 gpm, viton valves, santopreme diaphragm, 45 psi demand switch, 1/2” MPT ports. This pump is used on Broyhill’s 80 gallon sprayers. Order Number SH2088-313-145 $257.72 retail

1.4 gpm, viton valves, santopreme diaphragm, 45 psi internal by-pass, 3/8” female ports, no switch. This pump is used on Broyhill’s foam marker.Order No. SH8000-543-250 $127.34 retail

PARTS BREAKDOWN FOR SHURFLO 8000-543-250

Ref. Part No. Quan. Description NET Price1 SH94-382-09 1 Complete pump head 120.632 Not available3a Not available3b Not available4 Not available5a SH94-391-09 1 By-pass valve assembly 44.815b Not available6 SH94-395-06 1 Diaphragm kit 17.607 SH94-385-03 1 Drive assembly 24.058 Not available

*NET Pricing shown on pump parts (no discount)*



-29-

TERRAMASTER/CUSHMAN CENTRIFUGAL HY-94012 PUMPBroyhill’s exclusive high capacity, cast iron, straight centrifgual pump. Includes 6 spline 1000 RPM PTO quick coupler. Designed for

TERRAMASTER sprayer on Cushman truckster. Pump Order Number HY94012 $987.96 Retail(This pump replaces the obsoleted 94002, 94004, 94006, 94007, 94008 pumps)

Ref. Order No. Quan. Description Price Ea.1 HY2406-0007 4 Drain plug .702 HY0150-9000C 1 Pump casing, includes stainless 176.00 steel wear ring3 HY2253-0002 1 Impeller nut 4.254 HY0401-9100P 1 Impeller, white nylon 37.00 HY0402-9100P Impeller, black polypropylene 41.005 HY1720-0083 1 O-ring 2.556 HY2120-0009 1 Mechanical seal, viton 38.50 HY2120-0032 Silicon mechanical seal, available 171.00 in kit - see HY3430-0589 HY3430-0589 Optional silicon mechanical seal kit 171.007 HY1830-0040 1 Seal retainer 1.258 HY1410-0056 1 Slinger ring .909 HY0750-9200C4 1 Black mounting flange 131.0010 1 Name plate, specify pump series11 HY2210-0020 4 Bolt .6512 HY2000-0010 3 Ball bearing 8.0513 HY1610-0015 1 Key 1.3014 HY0505-9200 1 Pump shaft 125.0015 HY1610-0004 1 Key 1.1516 HY1820-0013 1 Bearing retainer .8517 HY1700-0100 1 Gasket 3.6518 HY0703-9400D 1 Pedestal bracket 246.0019 HY2001-0006 2 Driver shaft bearings 16.5020 HY1810-0012 1 Driver shaft bearing retainer ring 1.3521 HY1410-0094 1 Bearing spacer 24.7522 HY2840-0053 1 End cap 8.3023 HY1820-0032 1 Bearing bore retainer ring 2.8524 HY3115-0032 1 Driver pulley, 1000 RPM 377.0025 HY1610-0033 1 Woodruff Key 6.00

Ref. Order No. Quan. Description Price Ea.26 HY1810-0031 1 Retainer ring, driver pulley 3.0528 HY0555-9400F1 1 Shaft 305.0028A HY3250-0004 3 Locking ball, nylon .9028B HY1900-0115 1 Collar spring 14.5028C HY1400-0021 1 Collar, sleeve 47.0030 HY3115-0034 1 Driven pulley, 5/8” dia. bore 92.0031 HY2230-0003 2 Set screw for driven pulley .6532 HY0706-9400C 1 Idler bracket (c.i. pumps) 274.0033 HY2405-0003 1 Grease zerk fitting 1.2034 HY1810-0036 1 Retaining ring (idler bracket) 3.9535 HY3115-0036 1 Idler pulley 41.5036 HY1410-0095 1 Spacer, idler/pulley 5.1037 HY1820-0013 1 Retaining ring, idler pulley .8538 HY1900-0156 1 Torsion spring, idler for cast iron 12.7539 HY2210-0111 1 Idler bolt/shaft 2.6540 HY2840-0075 1 Belt shield 21.5041 HY2840-0076 1 Belt shield 21.5042 HY1520-0062 1 Bracket for belt shield 12.5043 HY2210-0021 1 Attachment bolt for shield .6544 HY2240-0017 4 Assembly bolts .7545 HY2252-0002 4 Assembly nuts for shield .7046 HY3100-0005 1 1000 rpm poly v-belt 57.7547 HY2210-0055 2 Bolts for pump to bracket .5048 HY2260-0006 2 Lock washers for bolts .5049 HY1600-0070 2 Roll pin .65 HY3430-0477 Repair kit - consists of poly 99.50 v-belt, o-ring, mechanical seal and gasket. HY3430-0332 Repair kit - consists of mechanical 43.50 seal, o-ring & gasket



-30-

Ref. Order No. Quan. Description Price Each1 HY2406-0007 4 Drain plug .702 HY0150-9000C 1 Pump casting (9203C model) 176.00 ports: 1 1/2” x 1 1/4” HY0150-9200C 1 Pump casting (9202C models) 196.00 ports: 1 1/4”, includes a stainless steel wear ring3 HY2253-0002 1 Impeller nut 4.254 HY0401-9100P 1 Impeller (nylon - standard) 37.00 HY0402-9100P 1 Impeller (poly) 41.005 HY1720-0083 1 O-ring 2.556 HY2120-0008 1 Mechanical seal (opt. Buna-N) 22.25 HY2120-0009 1 Mechanical seal (standard viton) 38.50 HY3430-0589 1 Silicon Carbide Mechanical Seal Kit 171.00 7 HY1830-0040 1 Seal retainer 1.258 HY1410-0056 1 Slinger ring .909 HY0750-9200C3 1 Mounting flange 131.0010 HY6031-0252 1 Name plate (special model) 11 HY2210-0020 4 Hex head screw .6512 HY2000-0010 2 Ball bearing 8.0513 HY1610-0015 1 Key 1.3014 HY0505-9200 1 Pump shaft 125.0015 HY1610-0004 1 Key 1.1516 HY1820-0013 1 Bearing retainer .8517 HY1700-0100 1 Gasket 3.6518 HY2526-0012 1 Clutch for 9263C-C 513.00 HY3430-0332 Repair kit for pump - consists of 43.50 o-ring, mechanical seal & gasket

ACCUMASTER/HYPRO PUMP RETROFIT KIT - TO CHANGE THE ACE PUMP ON YOUR ACCUMASTER® TO A HYPRO 9263C-C CENTRIFUGAL PUMP

Kit includes Hypro 9263C-C pedestal centrifugal pump with magnetic clutch and mounting bracket,replacement shield, two v-belts, sheave and 1” split taper bushing, miscellaneous mounting hardware (reducing bushing, elbows, etc.)

Order Item 2596-2 $1139.00

No warranty or labor will be issued in the change out of the Ace pump to the Hypro pump. Standard dealer discount will apply. Price does not include dealer set up time or shipping charges.

ACCUMASTER HYPRO CENTRIFUGAL PUMP

Pedestal mount, cast iron pump with 12 volt heavy duty clutch with 5” dia. A-section pulley, 1 1/2” NPT inlet, 1 1/4” outlet, counter clock-wise rotation.

Pump Order Number HY9263C-C $800.00

Pump Order No. HY9263C-CBR $907.00Same as HY9263C-C except includes Silicone Carbide Seal

ACCUMASTER PARTS LIST FORDRIVE SHAFT & PULLEY

Ref. Part No. Qty. Description Price Each1 HY9263C-C 1 Hypro centrifugal pump 800.00 with magnetic clutch2 ZZA29 2 V-belt 16.723 ZZVPS-116 2 1” pillow block bearing 90.224 ZZHFLN-14 2 1/4” hex flange lock nut .405 ZZFW-38 6 3/8” flat washer .406 ZZLW-38 7 3/8” lock washer .407 ZZHN-38 8 3/8” hex nut .408 BR11186 1 1” dia. drive shaft 20.289 BE1/4X1/4X31/2 1 1/4” x 1/4” x 3 1/2” long key 3.1910 ZZH-1 1 1” split taper bushing 25.7711 ZZ2AK64H 1 Cast iron FHP sheave 122.8612 WSM-18040 1 PTO shaft (was WSM-6806) 405.2513 ZZPC108-2SP 1 1 1/2” two piece locking collar 24.1714 ZZHCS-38X134 1 3/8” x 1 3/4” grade 5 hex screw .8015 ZZCS-38X112 3 3/8” x 1 1/2” carriage screw .40



-31-

HYPRO 9253C-C CENTRIFUGAL PUMP WITH OLD STYLE MAGNETIC CLUTCH

Ref. Order No. Quan. Description Price Each17 HY1700-0100 1 Gasket 3.65 HY2300-0025 1 Protective cover (not shown) 2.9018 HY2526-0003 1 Clutch - for 9252C-C, 9253C-C 641.00 and 9253C-CR pumps18 HY2526-0010 1 Clutch for 9263C-C pumps. For 854.00 the 2526-0010 clutch to fit on the 9253C pump - flange (Ref. 9) must be machined. If not machined, must purchase Ref. 9 #HY0750-9200C3

ACCUMASTER KIT Order Item 2797-KIT $1048.00

Kit includes Hypro 9263C-C pedestal centrifugal pump with magnetic clutch, ZZ2AK64H sheave, ZZH-1 pulley bushing and two ZZA29 v-belts.

For the HY2526-0010 clutch to fit on the 9203C pump - flange (Ref. 9) must be machined.

Clutch number 2526-0010

machined part

Ref. Order No. Quan. Description Price Each1 HY2406-0007 4 Drain plug .702 HY0150-9200C 1 Pump casing 196.003 HY2253-0002 1 Impeller nut 4.254 HY0401-9100P 1 Nylon impeller 37.005 HY1720-0083 1 O-ring 2.556 HY2120-0009 1 Viton mechanical seal 38.50 HY2120-0008 Optional Buna-N mechanical seal 22.257 HY1830-0040 1 Seal retainer 1.258 HY1410-0056 1 Slinger ring .909 HY0750-9200C3 1 Mounting flange 131.00 10 HY6031-0252 1 Name plate, specify model11 HY2210-0020 4 Bolt .6512 HY2000-0010 2 Ball bearing 8.0513 HY1610-0015 1 Key 1.3014 HY0505-9200 1 Pump shaft 125.0015 HY1610-0004 1 Key 1.1516 HY1820-0013 1 Bearing retainer .85



-32-

HYPRO 4001XL-R Reverse rotation 4 Roller Silver Series Pump - Used On Broyhill’s 50 & 80 Gallon SprayersRef. Part No. Qty. Description Price Each1 HY0100-4001X 1 Body, SilverCast with std. seal 291.002 HY0200-4001X 1 End plate, SilverCast with std. seal 117.003 HY0301-4001X 1 Rotor, SilverCast & shaft assembly 156.003A HY0500-6600 1 Shaft only 28.504 HY2230-0016 1 Rotor set screw (SilverCast only) 2.455 HY1005-0002 4 Super rollers, std. 3.05 HY1002-0002 4 Polypropylene rollers, optional 2.65 HY1055-0002 4 Teflon rollers, optional 12.506 HY1720-0104 1 O-ring gasket for end plate .707 HY2220-0018 4 End plate screw .658 HY2107-0002 2 Viton seal, standard 8.40 HY2102-0001 2 Buna-N seal, optional 20.009 HY2000-0010 2 Ball bearing 8.0511A HY6031-0258 1 Name plate, specify pump series16 HY2300-0023 1 Shaft bearing cover 1.1517 HY2300-0021 1 Bearing cover 1.10

Repair Kit consists of super rollers, o-ring gasket and viton seal. Order No. HY3430-0390 $29.00

Repair Kit consists of polypropylene rollers, o-ring gasket and viton seal. Order No. HY3430-0158 $27.50

Ace mechanical seal centrifugal pump with magnetic clutch. Order Number AC47040 $790.00 listPump and pump parts are shipped directly from Ace. Add $10.00 (net) dropship charge plus any UPS charges.

Ref. Order No. Qty. Description Price Each1 AC41110 3 Pipe plug, 1/8” NPT .502 AC40250 1 Volute 1 1/4” x 1”, cast iron 175.003 AC40430 1 Impeller 60.004* AC40005 1 O-ring for volute seal 7.004* AC40010 1 Gasket, 4 hole 3.005 AC40152 Opt. silicone carbide mechanical 137.00 seal (in lieu of AC40141)5A AC40160 1 O-ring for shaft 1.006 AC40285 1 Mounting frame machined 230.00 To accept magnetic clutch7 AC40930 4 Cap Screw, st. steel 2.507 AC40950 4 Cap Screw .50

8 AC41130 1 Slinger 1.509 AC40810 2 Snap ring, internal 2.0010 AC40870 2 Bearing for driven shaft 19.0011 AC40790 2 Snap ring, external, for driven shaft .5012 AC40795 1 Spacer for shaft 6.0013 AC40050 1 5/8” driven shaft, left hand 80.00 course thread (optional)13 AC40070 1 5/8” driven shaft, left hand thread 80.0014 AC41080 1 Key 1.2515 AC41477 1 Spacer, clutch 10.0016 AC41476 1 Coil Ring, 12 volt, DC Activated 248.0017 AC41479 1 5 1/4” pulley assembly complete 515.00 with bearing & clutch driver AC052700 Repair kit include parts marked* 49.00 AC41475 Magnetic clutch assembly, 745.00 includes AC41476, AC41477 and AC41479

ACCUMASTER CENTRIFUGAL PUMPFor John Deere AccuMaster sprayers built BEFORE the fall of 1995

Pump Number HY4001XL-R $470.00 list



-33-

CLEANLOAD - CHEMICAL EDUCTOR

Hypro’s Cleanload is a self-contained eductor system that allows the operator to mix liquid and dry chemical safely and quickly. 316 stainless steel venturi provides highest eduction rate and durability against all chemicals. Eduction rates as fast as only 1 second per gallon. Chemical spill potential is reduced, minimizing operator and environmental exposure. Available in 4.5 or 5 gallon hoppers. Can be used for mixing liquid or dry flowable chemicals.

Order Number HY3374P-05T4 Chemical Eductor with 4.5 gallon hopper. $855.00 retail.

Order Number HY3374P-05T5 Chemical Eductor with 5 gallon hopper. $1274.00 retail

HYPRO’S 9200 SERIES STAINLESS STEEL CENTRIFUGAL PUMPS, PEDESTAL-MOUNT MODELS FEATURING LIFE GUARD*

SILICON CARBIDE SHAFT SEAL

Order Max. Max. Max. Description PriceNo. GPM PSI RPMHY9202S 105 170 6000 Pedestal mount, stainless steel pump with 5/8” solid shaft $943.00 and Life Guard* silicon carbide shaft seal. Ports (NPT) 1 1/4” inlet, 1” outlet.

HY9203S 136 170 6000 Pedestal mount, 316 stain. steel pump with 5/8” solid shaft $960.00 and Life Guard* silicon carbide shaft seal. Ports (NPT) 1 1/2” inlet, 1 1/4” outlet.

HY9203S-R 136 170 6000 Pedestal mount, clockwise rotation, 316 stain.steel pump $970.00 with 5/8” solid shaft and Life Guard* silicon carbide shaft seal. Ports (NPT): 1 1/2” inlet, 1 1/4” outlet.

HYPRO’S LIFE GUARD* SILICON CARBIDE SEAL

Up to 8 times longer life than ceramic seals when used in abrasive solutions.

Up to 21 times more dry run survivabiity than ceramic seals.

Pressure balanced design allows for lighter spring loads and lower running temperatures resulting in a longer overall seal life.

Available as a drop-in replacement for existing 9200, 9300, 9400 series cast iron and stainless steel Hypro pumps. Kit Number HY3430-0589 $171.00 retail.

*Life Guard is a registered trademark of Hypro



-34-

BROYHILL LINE STRAINERSBRE-206 BROYHILLLINE STRAINERMade with durable, non-corrosive poly line strainer with 1” NPT connection with 40 or 80 mesh screen. Base cap removes by hand for easy cleaning.

Complete strainer with 40 mesh screenOrder No. BRE-206-4 $46.93

Complete strainer with 80 mesh screenOrder No. BRE-206-8 $58.68

REPAIR PARTSFOR BRE-206 STRAINER

Order No. Description PriceAN1889 40 mesh screen 8.45AN2661 80 mesh screen 19.68

BRE-211 Nylon housing 26.05BRE-212 Nylon Cap 8.81

SWC557-70/2 Standard o-ring 1.87SW2-231/V Viton o-ring 12.15

PEF12 Bottom plug, 1/2” .41PEF38 Bottom plug, 3/8” .39



-35-



-36-

Sales Order Placement: 800.228.1003 x34 FAX: 402.987.3601



-37-

GAUGES & ACCESSORIESLIQUID FILLED GAUGE - 21/2” Face

PSI Range Order No. Price0-100 VAL-2141GXB100 23.37 0-200 AP99019283 23.370-300 PEGG-300 23.370-600 PEGG-600 23.370-1000 PEGG-1000 23.37

DRY STANDARD GAUGE0-100 AP99019268 7.510-200 AP99019015 7.510-400 PESG-400 7.510-600 PESG-600 7.51

GAUGE ISOLATORSpraying Systems isolator kit includes install-ation instructions, connectors, tubing insert,8 ft. of nylon tubing, poly fill bottle, 1/4” isolator and reducer.Order Number SS23800A-1/4” $111.35 BRASS NEEDLE VALVE

1/4” brass needle valve functions as an effective gauge pulsation damper and shut-off. Tampered needle allows minute orifice opening for accurate gauge readings. Valve has 1/4” female NPT outlet with one way flow.Order Number CN108KC $13.19

GAUGE ISOLATOR KIT FOR TERRAMASTER® &

ACCUMASTER® SPRAYERSDesigned to protect pressure gauges from chemicals as well as to keep chemicals out of the tractor cab away from operator. The following components are used in connecting the Spraying Systems 744 sprayer control for Broyhill’s TERRAMASTER or ACCUMASTER sprayers.

Ref. Order No. Quan. Description Price 1 SS22470-1/4 1 1/4” female NPT gauge isolator 84.06 2 SUNB4-035 15 ft. 1/4” OD nylon tubing (price per ft) 1.76/ft 3 ZZCN-14 1 1/4” steel close nipple 2.07 4 FPPMCD21-04 1 Coupling insert elbow w/check valve 24.05 5 FPPMCD10-04 1 Coupling body with check valve, 1/4” 17.42 male NPT

GAUGE AND VALVE DIAGRAM

5



-38-

PARTS LIST 43 SERIES SPRAY GUN - 43LC1/2Ref. Quan. Order No. Description Price1 1 SS1325 Cap, brass 1.312 1 SSD6-HSS #6 Orifice disc. Hardened SS 1.433 1 SS4743-NY Gasket, Nylon 1.494 1 SS10566 Nozzle housing, brass 18.06 1 SS10566-AL Nozzle housing, alum. 17.405 1 SS10565-AL Alum. seat plug, seat plate, 27.82 washer & core sub-assm.6 1 SS10571-2-NYB Guide vane, nylon 7.937 2 SS6943-AL Gasket, alum, (2 required) 1.508 1 SS19238-416 SS: Stem for 43H st. steel 22.909 1 SS6604 43L tubing, brass 37.1910 1 SS6492 Inlet body, brass 41.2311 1 SS6601-302SS Packing washer, st. steel 3.9312 3 SS6602-LEA Packing leather, standard 3.4213 1 SS19237 Packing screw, brass 4.9614 1 SS6599 Lock nut, brass 3.3415 1 SS9641-INP Stem nut 5.4316 1 SS6595-SS Trigger stop spring, st. steel 2.9317 1 SS7991-IZP Washer, steel/cadmium plated 1.4618 1 SS6597-INP Trigger guide 15.4819 1 SS6591-SS Spring stud, st. steel 3.5020 1 SS6589-IZP Stop adjusting nut 4.5721 1 SS6594-SS Spring for stop adjusting nut 1.5522 1 SS6588-IZP Spring screw, steel/cadmium 4.8323 1 SS6592-302SS Spring guide washer 2.4424 1 SS6593-1-SS Main spring, st. steel, (43L) 4.9625 1 SS14477-1-AL Handle body, alum 54.3526 2 SS7623-IZP Rivit 1.4627 1 SS6509-INP Trigger 5.8628 1 SS6510-INP Trigger stop 5.1429 1 SS11757-SS Screw 4.0130 1 SS13798-INP Trigger guard 10.45

WALKING BOOM SPRAY GUN AND SPRAY GUN PARTS

Spray gun with 1/2” NPT, 200 psi rating, brass gun material. Used on Broyhill’s walking boom.

Order Number SS43LC1/2 $134.35

SPRAY GUNS

Check Out Our Web


REPAIR KIT FOR 43LC1/2 SPRAY GUNIncludes gasket, seat plug, packing washer, packing leather.

Order Number SSAB43-KIT(PK) $38.24



-39-

TRIGGERJET SPRAY GUN WITH EXTENSIONTriggerJet gun with 15” extension and SS5500-PPB-X8 adjustable conejet tip.

Order SS22670-PP-15-VI $43.18

Ref. Order No. Description Price1 SS22656 Trigger Lock 1.832 SS22671-IZP Groove pin, zinc plated 1.153 SS22672-IZP Groove pin, zinc plated 1.154 SS22655-PP Trigger, polypro 3.265. SS22658-PP Spring retainer, polypro 2.206 SS22660-302SS Spring 1.197 SS22657-NY Stern, nylon 1.688 SS22676-NEO Gasket, neoprene 1.439 SS22659-PP Washer, polypro 2.2010 SS22661-V1 Diaphragm, viton 4.3111 SS22651-PP Body, polypro 8.4512 SS7717-2/216VI O-ring, viton 5.5113A SS22654-PP Handle with 1/4" 5.43 female NPT connection

Ref. Order No. Description Price14 SS7717-2/110-V1 O-ring, 2 required .8915 SS22668-PP Cap, 2 required 1.4616 SS22663-15-FRP 15" extension tube 9.7117A SS22673-PP 45 degree adapter 1.7017B SS22664-PP Strainer adapter 1.7517 SS8079-PP50 50 mesh strainer 1.1418 SS5500-PPB-X8 Adjustable conejet tip 8.66 SSAB22670-PP-KIT Repair kit includes ref. no. 12.62 6, 8, 10, 12, 14

Ref. Quan. Order No. Description Price 1 1 SS16054-1-AL Body 34.05 2 1 SS16053-1-30255 Main Spring, SS23L 4.82 3 1 SS7480-IZP Spring screw 4.82 4 1 SS7491-SS Spring stud 4.28 5 1 SS8591-IZP Trigger guide 1.79 6 1 SS7486-SS Lock nut 5.34 7 1 SS16071-SS Packing screw 10.33 8 1 SS14255-1-BU Cup packing 5.57 9 1 SS7892-IZP Key 2.94 10 1 SS16074-SS Inlet body 64.44 11 1 SS7677-18-SS Stem, st. steel, for 18” exten. 26.21 12 1 SS7679-1-SS Stem guide nut 13.02

SPRAY GUNS FOR BROYHILL’S 50 GALLON UTILITY AND

80-110-160 GALLON STADIUM SPRAYERSBrass trigger gun with 18” extension and X8 adjustable conejet tip. Used on Broyhill’s Stadium

sprayers with roller pumps and engine. Order Number SSAA23L-7676-18 $107.04

Ref. Quan. Order No. Description Price 13 1 SS7678 Stem end` 7.40 14 1 SS4743-TEF Teflon gasket 5.36 15 1 SS7715-18 Extension assembly 14.71 16 1 SS23437-PP Valve seat 1.23 18 1 SS5500-PPB- Adjustable conejet, 8.66 size X8, poly 19 1 SS9539-INP Trigger guard 7.21 20 1 SS14252-INP Trigger 7.44 21 2 SS8038-SS Rivet 1.50 22 1 SS9697-INP Pan head screw NLA



-40-

23 SERIES SPRAY GUNS & PARTS LIST23 SERIES - COMPLETE SPRAY GUNS

Order No. PSI Extension Gun Length PriceSS23L 0-125 None 6 1/2” 67.59SS23H 125-1000 None 6 1/2” 69.50SS23L-7676-8 0-125 14” long 22” 100.41SS23L-7676-18 0-125 18” long 24” 107.04SS23H-12085-18 125-1000 18” long 24” 214.78SS23L-7676-24 0-125 24” long 30” 113.47SS23L-7676-36 0-125 36” long 42” 122.61SS23H-12085-36 125-1000 36” long 42” 214.78REPAIR KITS:SSAB23L-KIT(PK) low pressure gun repair kit 20.51SSAB23H-KIT(PK) high pressure gun repair kit 23.20

Note: Extensions have shut-off at orifice tip, Includes cap, less tip. 23 Series Spray Guns have optional curved extension assemblies

available - refer to Spraying Systems TeeJet Catalog for more information and pricing.

PARTS LIST 23 SERIES SPRAY GUNRef. Quan. Order No. Description Price Ea.1 1 SS16054-1-AL Body, alum. 34.052 1 SS16053-1-SS (302SS) Main spring, 125 psi 4.82 1 SS16053-2-SS Main spring, 800 psi 4.823 1 SS7480-IZP Spring screw 4.824 1 SS7491-SS Spring stud 4.285 1 SS7481-INP Trigger guide 11.336 1 SS7622-302SS No. 6 steel burr 1.468 1 SS7484-INP Stem nut 3.069 1 SS7486-IZP Lock nut 5.34 1 SS7486-SS Lock nut, st. steel 5.3410 1 SS7485-NP Packing screw, brass 3.10 1 SS7485-SS Packing screw 11.7111 3 SS7487-1-TEF Packing, teflon, std. 3.6812 1 SS7892-IZP Key 2.9413 1 SS7533-SS Inlet body 64.4414 1 SS7482-1 Sub-assembly with stem & 7.22 brass guide, BR302SS 1 SS7482-1-SS Sub-assembly with stem & 11.19 stainless steel guide15 1 SS7490-BRTF Seat, brass & teflon (std) 5.63 1 SS7490 Seat, brass (opt) 3.40 1 SS7490-SSTEF Seat, st. steel & teflon 8.4116 1 SS1325 Brass cap 1.3119 1 SS7476-INP Trigger 5.6320 2 SS8038-IPZ Rivet, SS 1.50

EXTENSION PARTS LISTRef. Order No. Description Price Each20 SS7678 Stem end, brass 7.4021 SS7679-1 Stem guide nut 2.9322A SS7677-8-SS Stem, stain. steel, 8” 21.2022B SS7677-18-SS Stem, stain. steel, 18” 26.2122C SS7677-24-SS Stem, stain. steel, 24” 34.3722D SS7677-36-SS Stem, stain. steel, 36” 46.2923 SS7679 Spider, brass (for 40” extension) 6.0224A SS7715-8 8” extension tube assembly 11.6824B SS7715-18 18” extension tube assembly 14.7124C SS7715-24 24” extension tube assembly 15.9024D SS7715-36 36” extension tube assembly 20.1125 SS4743-TEF Gasket, teflon, std. 5.36

Ref. Order No. Quan. Description Price Ea.1 SS1325-AL 1 Alum. cap 1.25 2 SSD-**-HSS 1 Orifice disc, specify size 1.433 SS5871-BU 1 Tip gasket, Buna-N 3.524 SS5869-AL 1 Spray housing, alum 6.565 SS10516-AL 1 Core, rivit & core body sub- 16.38 assembly, alum.6 SS5872-AL 1 Guide sleeve, alum. 2.947 SS4143-CU 2 Gasket, copper 1.508 SS5798-NY 1 Seat plate, nylon 5.829 SS7709-SS 1 #10 washer, st. steel 6.5510 SS5878-AL 1 Alum. tubing 21.0211 SS5879-AL 1 Stem, alum. 8.77

18 SERIES SPRAY GUN & PARTS LISTComplete 18 Series gun with 1/4” female NPT inlet, 14” total gun length and D6 orifice disc at end of gun. Gun is available in brass or aluminum.Order No. SSAA18-AL6, alum. gun $79.24 Order No. SSAA18-6, brass gun $111.59

Ref. Order No. Quan. Description Price Ea.12 SS6618-AL 1 Nut, alum. 1.4613 SS6898-AL 1 Inlet body, alum. 31.5214 SS5882-NP 1 Hand grip stud 10.7815 SS5883-AL 1 Packing washer, alum. 1.5016 SS5809-LEA 4 Packing washer, leather 1.5017 SS5811-AL 1 Packing screw, alum 3.3418 SS5884-INP 1 Hand grip collar 7.8919 SS5994-NY 1 Plastic hand grip, nylon 9.1620 SS5813-AL 1 Hand grip nut, alum. 2.51

SSAB18-AL-KIT Repair kit for 18-AL gun 22.27

How to install7490-Valve Seat



-41-

43 SERIES SPRAY GUNS & PARTS LISTTHIS GUN IS USED IN BROYHILL’S ITEM 2072 SPRAY GUN KITS

43 SERIES - COMPLETE SPRAY GUNSOrder No. Outlet PSI Gun Mat’l Length PriceSS43L D tip 200 Brass 22” 167.07SS43L-AL D tip 200 Alum. 22” 138.81SS43H D tip 800 Brass 22” 167.07SS43H-AL D tip 800 Alum. 22” 138.81SS43LC1/2 1/2” NPT 200 Brass 8” 134.35SS43LC-1/2-AL 1/2” NPT 200 Alum. 8” 125.72SS43HC-3/4 3/4” NPT 800 Brass 8” 134.25

REPAIR KITS FOR 43 SERIES GUNSOrder No. SSAB43-KIT(PK) for brass 43 series gun 38.24Order No. SSAB43-AL-KIT(PK) for alum. 43 series gun 38.24

Please refer to TeeJet Catalog for more 43 Series guns

PARTS LIST 43 SERIES SPRAY GUN - 43L, 43H, 43LA & 43HARef. Quan. Order No. Description Price1 1 SS1325 Cap, brass 1.31 1 SS1325-AL Cap, alum. 1.252 1 SSD6-HSS #6 orifice disc, hardened st. steel 1.433 1 SS4743-NY Gasket, Nylon 1.494 1 SS10566 Nozzle housing, brass 18.06 1 SS10566-AL Nozzle housing, alum. 17.405 1 SS10565-AL Alum. seat plug, seat plate, 27.82 washer & core sub-assm.6 1 SS10571-2-NYB Guide vane, nylon 7.937 2 SS6943-AL Gasket, alum, (2 required) 1.508 1 SS19238-416 SS: Stem for 43H & 43L, st. steel 22.909 1 SS6604 43L & 43H tubing, brass 37.19 1 SS6604-AL 43L & 43H tubing, alum. 37.1910 1 SS6492 Inlet body, brass 41.23 1 SS6492-AL Inlet body, alum. 29.0211 1 SS6601-302SS Packing washer, st. steel 3.9312 3 SS6602-LEA Packing leather, standard 3.42 3 SS6602-TEF Packing teflon, optional 8.6513 1 SS19237 Packing screw, brass 4.96 1 SS19237-AL Packing screw, alum. 4.9614 1 SS6599 Lock nut, brass 3.34 1 SS6599-IZP Lock nut, steel/zinc plated 3.3415 1 SS9641-INP Stem nut 5.4316 1 SS6595-SS Trigger stop spring, st. steel 2.9317 1 SS7991-IZP Washer, steel/cadmium plated 1.4618 1 SS6597-INP Trigger guide 15.4819 1 SS6591-SS Spring stud, st. steel 3.5020 1 SS6589-IZP Stop adjusting nut 4.5721 1 SS6594-SS Spring for stop adjusting nut 1.5522 1 SS6588-IZP Spring screw, steel/cadmium 4.8323 1 SS6592-302SS Spring guide washer 2.4424 1 SS6593-1-SS Main spring, st. steel, (43L) 4.96 1 SS6593-2-SS Main spring, st. steel, (43H) 4.9625 1 SS14477-1-AL Handle body, alum 54.3526 2 SS7623-IZP Rivit 1.4627 1 SS6509-INP Trigger 5.8628 1 SS6510-INP Trigger stop 5.1429 1 SS11757-SS Screw SS 4.0130 1 SS13798-INP Trigger guard 10.45

TEEJET LAWN SPRAY GUN

Model 25660 features interchangeable color coded nozzle tips for easy

identification of nozzle tip size. Tips provide a 45 degree full cone shower

head spray pattern. Maximum operating pressure is 150 psi.

Order No. Nozzle Color PriceSS25660-1.5 Gray 96.90SS25660-3.0 Black 96.90SS25660-4.0 Red 96.90



-42-

HOSE HOSE REELS HIGH PRESSURE HOSE

Outside color black. High pressure hose to withstand insecticides, fungicides, resistant to oil & petroleum products. Hose ID Working Feet per PriceOrder No. & Braid Pressure Reel Per FootGA3217-0055 1/2”-2 braid 800 psi 500 11.29

HIGH PRESSURE THERMO-AGYELLOW PLASTIC HOSE

Perfect for spray gun applications where long lengths of hoseare pulled through grass and shrubbery. Hose ID Working Feet per PriceOrder No. & Braid Pressure Reel Per FootGA4465-1362 3/8” - 0 braid 800 psi 400 2.52GT7580-600 1/2” - 0 braid 600 psi 300 2.87GA4465-0380 3/4” - 0 braid 800 psi 400 4.45

GENERAL PURPOSE SPRAY HOSEExcellent resistance to spray materials. Outside color black except GA3206-0215 which is red. Hose ID Working Feet per PriceOrder No. & Braid Pressure Reel Per FootGR-L85-3/8 3/8”-2 braid 250 psi 600 1.48AP10031730 1/2”-2 braid 200 psi 700 1.54GR-L85-3/4 3/4”-2 braid 150 psi 400 1.70GR-L85-1 1”-4 braid 250 psi 350 3.32GA3206-0215 1 1/4”-2 braid 200 psi 350 22.05

HELIX SUCTION HOSE Hose ID Working Feet per PriceOrder No. & Braid Pressure Reel Per FootAP12012797 11/4”-none 80 psi 100 3.16

PLASTIC HOSEFor sight gauge, by-pass or other applications requiring no working pressures. Hose ID Working Feet per PriceOrder No. & Braid Pressure Reel Per FootAM1/2”x.125 1/2” - 0 braid 45 psi 300 1.21AM3/4”x.125 3/4” - 0 braid 45 psi 175 1.49AM1”x.125 1” - 0 braid 45 psi 125 1.53

BRAIDED EVA HOSEEVA hose with nylon braid, translucent. Working Feet per PriceOrder No. Hose ID Pressure Reel Per FootAP250EVA 1/4” 500 psi 250 .91GR-V3020-3/8 3/8” 500 psi 250 .86AP500EVA 1/2” 500 psi 230 1.01GR-V3020-3/4 3/4” 500 psi 200 2.02AP100EVA 1” 500 psi 150 2.90

MANUAL CRANK HOSE REELS1/2” female IPT 90o swivel joint inlet, 1/2” female IPT outlet riser

Hose Capacity Of Reel (in feet)Order No. 3/8” ID 1/2” ID 3/4” ID 1” ID Wt. PriceCOX-1125-4-200 300 200 36 lbs. $399.34

ELECTRIC CRANK HOSE REELS1” female IPT 90o swivel joint inlet, 1” female IPT outlet riser

Hose Capacity Of Reel (in feet)Order No. 3/8” ID 1/2” ID 3/4” ID 1” ID Wt. PriceCOX1125-4- 300 200 48 lbs. 729.23 200E

COX1125-4- 300 55 lbs. 752.38325-EKXXX

HOSE CLAMPS Order No. Nominal Fits Hose Price Size Dia. WTM5 1/4” to 3/16” 5/8” to 1/4” 1.27 WT6H 1/4” to 3/8” 25/32” to 7/16” 1.80 WTM7 3/8” to 3/4” 1.79 WT10H 1/2” 1 1/16” to 9/16” 1.81 WT12H 5/8” to 3/4” 1 1/4” to 1 3/16” 1.81 WT16H 1” 1 1/2” to 1 3/16” 1.81 WT20H 1 1/4” 1 3/4” to 1 3/16” 1.81 WT32H 1 1/4” to 2” 2 1/2” to 1 9/16” 2.26



-43-

QUICK COUPLERS - SWIVELS - ADAPTERS -THERMO-AG & RUBBER HOSE FITTINGS

Order No. Size PriceSUBST-2 1/4” female half FNPT 13.91SUBST-N2M 1/4” male half NPT 5.64

SUBST-3 3/8” female half FNPT 18.97SUBST-N3M 3/8” male half NPT 6.95



SUBST-8 1” female half FNPT 61.96SUBST-N8M 1” male half NPT 31.61

HIGH PRESSURE QUICK COUPLER1000 psi brass coupler for spray gun hose or other applications requiring a quick connection coupling. Coupler swivels when joined.

FITTINGS FOR THERMO-AG HOSEOrder No. Description PriceGA7308-29245 3/8” swivel male NPT x 3/8” hose barb 8.30GA7307-29145 1/2” swivel male NPT x 1/2” hose barb 12.28GA7307-29165 1/2” female NPT x 3/8” hose barb 12.95GA7302-39145 1/2” swivel male NPT x 1/2” hose barb 14.94GA7302-35145 1/2” female NPT x 1/2” hose barb 11.42

FITTINGS FOR RUBBER HOSEOrder No. Description PriceGA7302-09145 1/4” swivel male NPT x 1/4” hose barb 10.62GA7308-29245 3/8” swivel male NPT x 3/8” hose barb 8.30GA7307-29165 1/2” swivel male NPT x 3/8” hose barb 12.95GA7302-39145 1/2” swivel male NPT x 1/2” hose barb 14.94GA7302-35145 1/2” female NPT x 1/2” hose barb 11.42GA7302-59145 3/4” swivel male NPT x 3/4” hose barb 19.92

90o SWIVEL JOINTHigh pressure (3000 psi) swivel joint for hose reel and other applications. 1/2” female pipe thread (side con-nection) x 1/2” female pipe thread (body connection). Body connection is thread sealed and designed to con-tinue to swivel after connection is tightened.Order No. IM59UE-08X08 $64.16

SWIVELSFEMALE TAPERED PIPE THREAD (NPT) X

FEMALE GARDEN HOSE THREAD1/2” female x 3/4” FGHT swivel

WR4905 $10.39

3/4” female x 3/4” female x 3/4” FGHT swivelWR4907 $8.85

NYLON OR BRASS ADAPTERSNYLON

Order No. Size PricePEE3412 1/2” MNPT x 3/4” MGHT .51PEG3412 1/2” FNPT x 3/4” MGHT 1.63PEE34 3/4” MNPT x 3/4 MGHT .50PEG34 3/4” FNPT x 3/4” MGHT 1.57

BRASSPEE3412B 1/2” MNPT X 3/4” MGHT 4.12PEE34B 3/4” MNPT X 3/4” MGHT 4.55

Replacement seal kit for 90o swivel includes 2 quad rings, 2 teflon back up washers and 2 dust seals.Order No. IM59SK-08 $9.44

Check Out Our Web




-44-

NYLON FITTINGSNYLON HEX HOSE INSERTS

Male Tapered Pipe Thread x Hose Barb

Order Male HoseNo. NPT Barb PricePEA1814 1/8” 1/4” .34PEA14 1/4” 1/4” .37PEA3814 3/8” 1/4” .37PEA1214 1/2” 1/4” .41PEA3414 3/4” 1/4” .51PEA1838 1/8” 3/8” .36PEA1438 1/4” 3/8” .38PEA38 3/8” 3/8” .39PEA1238 1/2” 3/8” .43PEA3438 3/4” 3/8” .47PEA1412 1/4” 1/2” .38PEA3812 3/8” 1/2” .40PEA12 1/2” 1/2” .44PEA3412 3/4” 1/2” .49PEA3858 3/8” 5/8” .42PEA1258 1/2” 5/8” .43PEA3458 3/4” 5/8” .49PEA1234 1/2” 3/4” .44PEA34 3/4” 3/4” .50PEA34100 3/4” 1” .69PEA100 1” 1” .79PEA114100 1 1/4” 1” 1.37PEA100114 1” 11/4” 1.23PEA11434 1 1/4” 3/4” 1.37PEA114 1 1/4” 1 1/4” 1.47PEA114112 1 1/4” 1 1/2” 1.57PEA112114 1 1/2” 1 1/4” 1.47PEA112 1 1/2” 1 1/2” 1.57PEA200 2” 2” 2.87

Order Male HoseNo. NPT Barb PricePEEL3814 3/8” 1/4 .64PEEL1438 1/4” 3/8” .60PEEL38 3/8” 3/8” .65PEEL1238 1/2” 3/8” .68PEEL3438 3/4” 3/8” .82PEEL1412 1/4” 1/2” .63PEEL3812 3/8” 1/2” .66PEEL12 1/2” 1/2” .69PEEL3412 3/4” 1/2” .83PEEL3412F* *3/4” 1/2” 1.90PEEL10012 1” 1/2” 1.42PEEL1458 1/4” 5/8” 1.42PEEL1258 1/2” 5/8” .76PEEL3458 3/4” 5/8” .83PEEL1234 1/2” 3/4” .78PEEL34 3/4” 3/4” .85PEEL34F* *3/4” 3/4” 1.96PEEL10034 1” 3/4” 1.42PEEL34100 3/4” 1” 1.54PEEL100 1” 1” 1.54PEEL114100 1 1/4” 1” 2.71PEEL114 1 1/4” 1 1/4” 2.50PEEL112 1 1/2” 1 1/2” 4.60PEEL200 2” 2” 5.45

*FEMALE NPT

NYLON REDUCING BUSHINGSOrder External InternalNo. NPT NPT PricePERB3814 3/8” 1/4” .76PERB1214 1/2” 1/4” .82PERB1238 1/2” 3/8” 1.37PERB3414 3/4” 1/4” .91PERB3412 3/4” 1/2” .91PERB10012 1” 1/2” 1.70PERB10034 1” 3/4” 1.60PERB11434 1 1/4” 3/4” 2.30PERB114100 1 1/4” 1” 1.95PERB112114 1 1/2” 1 1/4” 3.10PERB200100 2” 1” 5.85PERB300200 3” 2” 10.90

90° STREET ELBOWOrder No. Size PricePESE14 1/4” 1.68PESE12 1/2” 2.02PESE34 3/4” 2.55PESE100 1” 4.55PESE114 1 1/4” 5.80PESE112 1 1/2” 6.65PESE200 2” 8.45

NYLON HOSE MENDERSOrder No. Hose Barb PricePESHM3814 3/8”X1/4” .36PESHM1214 1/2”X1/4” .41PESHM38 3/8”X3/8” .37PESHM12 1/2”X1/2” .39PESHM1258 1/2”X5/8” .51PESHM58 5/8”X5/8” .47PESHM34 3/4”X3/4” .61PESHM100 1”X1” .80PESHM114 1 1/4”X1 1/4” 1.37PESHM112 1 1/2”X1 1/2” 2.37

NYLON 90° HOSE BARB ELBOWOrder No. NPT/HB PricePEEL38HB 3/8”X3/8” .62PEEL34HB 3/4”X3/4” .76PEEL100HB 1”X1” 1.47PEEL200HB 2”X2” 5.53

NYLON 900 ELBOWPELL12 1/2” 2.80PELL34 3/4” 3.10PELL100 1” 4.10

NYLON HOSE BARB TEEOrder No. Hose Barb PricePET14 1/4”x1/4”x1/4” .63PET38 3/8”x3/8”x3/8” .66PET12 1/2”x1/2”x1/2” .70PET58 5/8”x5/8”x5/8” .71PET34 3/4”x3/4”x3/4” .80PET100 1”x1”x1” 1.25PET114 1 1/4”x1 1/4”x1 1/4” 2.47

STRAIGHT TEEOrder No. NPT Size PricePETT14 1/4” 2.73PETT12 1/2” 3.55PETT34 3/4” 4.40PETT100 1” 7.00PETT114 1 1/4” 9.00PETT112 1 1/2” 8.75PETT200 2” 13.00

NYLON CLOSE NIPSOrder No. NPT PricePEM14 1/4” .38PEM38 3/8” .39PEM12 1/2” .41PEM34 3/4” .50PEM100 1” .81PEM114 1 1/4” 1.42PEM112 1 1/2” 2.66PEM200 2” 3.34

HOSE BARB FOR GARDEN HOSE THREAD SWIVEL NUTSOrder No. Hose Barb PricePEC14 1/4” .33PEC38 3/8” .36PEC12 1/2” .37PEC58 5/8” .41

NYLON PLUGSOrder No. Size PricePEF18 1/8” .34PEF14 1/4” .35PEF38 3/8” .39PEF12 1/2” .41PEF34 3/4” .44PEF100 1” .62PEF114 1 1/4” 1.08PEF112 1 1/2” 1.37

NYLON HOSE INSERTS ELBOWS

Male Tapered Pipe Thread(NPT) x Hose Barb



-45-

IRON FITTINGSIRON CLOSE NIPSOrder No. NPT Size PriceZZCN-18 1/8” 1.49ZZCN-14 1/4” 2.07ZZCN-38 3/8” 2.25ZZCN-12 1/2” 1.66ZZCN-34 3/4” 1.82ZZCN-10 1” 3.47ZZCN-114 1 1/4” 4.63ZZCN-112 1 1/2” 4.63ZZCN-20 2” 11.61

IRON CROSSESOrder No. NPT Size PriceZZCR-18 1/8” 8.29ZZCR-14 1/4” 8.29ZZCR-38 3/8” 8.29ZZCR-12 1/2” 16.59ZZCR-34 3/4” 18.25ZZCR-10 1” 23.23ZZCR-114 1 1/4” 19.91ZZCR-112 1 1/2” 21.57ZZCR-20 2” 36.50

IRON COUPLINGSOrder No. NPT Size PriceZZCU-18 1/8” 2.07ZZCU-14 1/4” 3.31ZZCU-38 3/8” 3.31ZZCU-12 1/2” 3.47ZZCU-34 3/4” 4.63ZZCU-10 1” 5.81ZZCU-114 1 1/4” 9.95ZZCU-112 1 1/2” 7.95ZZCU-20 2” 13.27

IRON REDUCING BUSHINGSOrder No. NPT Size PriceZZRB-10-12 1”x1/2” 4.99ZZRB-10-14 1”x1/4” 7.65ZZRB-10-34 1”x3/4” 4.99ZZRB-10-38 1”x3/8” 4.99ZZRB-112-10 1 1/2”x1” 8.61ZZRB-112-114 1 1/2”x1 1/4” 9.34ZZRB-112-12 1 1/2”x1 1/2” 8.61ZZRB-112-34 1 1/2”x3/4” 6.25ZZRB-114-10 1 1/4”x1” 7.33ZZRB-114-12 1 1/4”x1/2” 6.25ZZRB-114-34 1 1/4”x3/4” 6.25ZZRB-12-14 1/2”x1/4” 3.41ZZRB-12-38 1/2”x3/8” 3.41ZZRB-20-10 2”x1” 11.35ZZRB-20-112 2”x1 1/2” 11.35ZZRB-20-114 2”x1 1/4” 11.35ZZRB-212-20 2 1/2”x2” 22.86ZZRB-34-12 3/4”x1/2” 3.85ZZRB-34-14 3/4”x1/4” 3.41ZZRB-34-38 3/4”x3/8” 3.41

90° ELBOWS - IRONOrder No. NPT Size PriceZZEL-18 1/8” 4.97ZZEL-14 1/4” 2.81ZZEL-38 3/8” 2.65ZZEL-12 1/2” 3.31ZZEL-34 3/4” 4.14ZZEL-10 1” 7.05ZZEL-114 1 1/4” 11.61ZZEL-112 1 1/2” 13.27ZZEL-20 2” 14.93

90° IRON STREET ELBOWS

Order No. Size PriceZZSE-18 1/8” 6.44ZZSE-14 1/4” 6.44ZZSE-38 3/8” 6.44ZZSE-12 1/2” 6.44ZZSE-34 3/4” 6.84ZZSE-10 1” 9.66ZZSE-114 1 1/4” 11.27ZZSE-112 1 1/2” 19.33ZZSE-20 2” 17.72

STRAIGHT TEE IRONOrder No. Size PriceZZTW-18 1/8” 4.97ZZTW-14 1/4” 4.97ZZTW-38 3/8” 6.63ZZTW-12 1/2” 4.97ZZTW-34 3/4” 6.63ZZTW-10 1” 9.95ZZTW-114 1 1/4” 14.93ZZTW-112 1 1/2” 16.59ZZTW-20 2” 21.57

IRON SIDE OUTLET TEE

Order No. Size PriceZZSTW-12 1/2” 20.94ZZSTW-34 3/4” 22.55

45° IRON STREET ELBOWS

Order No. Size PriceZZSE-45-14 1/4” 4.07ZZSE-45-38 3/8” 4.80ZZSE-45-12 1/2” 4.02ZZSE-45-34 3/4” 4.83ZZSE-45-10 1” 8.05ZZSE-45-114 1 1/4” 12.88ZZSE-45-112 1 1/2” 14.49ZZSE-45-20 2” 38.66

REDUCING TEE IRONOrder No. Size PriceZZRTW-12-12-34 1/2”x1/2”x3/4” 6.44ZZRTW-12-38-12 1/2”x3/8”x1/2” 4.83ZZRTW-34-34-38 3/4”x3/4”x3/8” 11.27ZZRTW-34-12-12 3/4”x1/2”x1/2” 6.44ZZRTW-12-12-38 1/2”x1/2”x3/8” 4.83ZZRTW-12-38-38 1/2”x3/8”x3/8” 4.83ZZRTW-34-34-12 3/4”x3/4”x1/2” 9.66ZZRTW-10-10-34 1”x1”x3/4” 9.66ZZRTW-38-38-12 3/8”x3/8”x1/2” 4.83ZZRTW-34-12-34 3/4”x1/2”x3/4” 6.44ZZRTW-34-34-10 3/4”x3/4”x1” 12.88

IRON REDUCING NIPPLESOrder No. NPT Size Length PriceZZRN-34-12 3/4”x1/2” 23/4” 16.59ZZRN-10-34 1”x3/4” 3” 21.57ZZRN-114-10 1 1/4”x1” 31/2” 21.57

REDUCING ELBOWS IRON

Order No. Large NPT Small NPT PriceZZRE-34-12 3/4”x1/2” 1/2” 6.63ZZRE-10-34 1”x3/4” 3/4” 8.29ZZRE-114-10 1 1/4”x1” 1” 14.93ZZRE-112-10 1 1/2”x1” 1” 9.95

SWAGGED HOSE NIPPLESOrder No. Male NPT Hose Barb PricePEA34S 3/4” 3/4” 5.15



-46-

LEGACY PRO & SPORTREPLACEMENT PARTS FOR OIL RESERVOIR, COOLER, MOTORS, HUBS & TIRES

ITEM 2693 HYDRAULIC OIL RESERVOIRRef. Part No. Quan. Description18 BR12172 1 Oil Reservoir Tank NOTT-SES-3-40-S80 1 Filler breather assembly TM2501-10-8 1 #8 pipe to #10 JIC male elbow TM2503-8-8 1 Male Branch Tee TM5406-SHP 1 1/4” pipe plug, square TM4311-10 1 #10 brass push on fitting TM4311-8 1 #8 brass push on fitting

ITEM 2700 OIL COOLER23 PS-10215VI-135 1 Oil Cooler TM5502-12 1 #12 female pipe thread elbow ZZN-34X212 1 3/4” pipe nipple x 2 1/2” long TM5406-12- 2 #12 pipe reducing bushing to #8 pipe thread TM2404-6-8 2 #8 male pipe to #6 male JIC straight connector15 PS-FA3N12-25 1 Filter Head17 PS-FA35-CC10 1 Filter Element16 BR12111 1 Filter Head Mount23 BR12082 1 Oil Cooler bracket23 UI-784658 1 3/4” rubber coated conduit clamp

ITEM 2703 HYDRAULIC MOTORS/FITTINGS/HUBS/TIRES7 PS-158-3134 2 Rear drive motors (tapered shaft) TM6801-8-10 4 #10 male o-ring to #8 male JIC elbow TM2603-8-8-8 2 #8 male JIC tee1 PS-101-2829 1 Front drive motor with end Ports TM6801-6-8 2 #8 o-ring to #6 male JIC elbow CRT28-296-P 3 Wheel/tire assembly, 22-11.00-8 tire, 8x8.5 ATV 5 on 4.5 rim and 1/2-20 lug nuts FH5552 15 1/2-20 lug nuts SCB-CK18X112 3 1/8” x 1 1/2” cotter key20 PS-1120-045 1 Hydrostatic pump with tow valve8 PS-30922-CEN 1 Eaton control valve, less handles19 AH-13292P 2 Lift Cylinder

DOMESTIC2010 POLICY, TERMS & CONDITIONS

EFFECTIVE OCTOBER, 2009

PRODUCT DEFINITIONS: Broyhill New Product Warranty as stated below. Broyhill Demo Product Warranty applies to units demonstrated by The Broyhill Company personnel only. Warranty will be the same as on new product stated below. Broyhill Used Product Warranty applies to units that have been traded in on new products and are not new or demo equipment. Warranty is 30 days from date of invoice. Broyhill Warranty Cards must be filled out and returned by the user/dealer on all products to receive Broyhill warranty. MSDS sheets must accompany all returns for any/all chemicals that have passed through the parts.

LIMITED WARRANTY: Broyhill fabricated sprayers and sprayer accessories are warranted FOR ONE (1) YEAR FROM THE DATE OF SHIPMENT TO THE ORIGINAL PURCHASER/USER as determined by the dealer of our records against defects in material and workmanship only. Broyhill’s 3 & 4 wheel vehicles are warranted for one (1) year or up to 540 vehicle hours whichever comes first. No warranty expressed or implied extends beyond this one (1) year period. All other oursourced parts used in the assembly of Broyhill’s TerraSport, TerraForce, Legacy, Load-And-Pack, Turf, OPE, Ag, Refuse and Lawn & Garden equipment will be covered by the component manufacturer’s warranty policy. Broyhill’s Stock Tank Heater is warranted for a maximum of one (1) year from the date (by our records) on the product invoice. WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT OF THE PART AFTER FACTORY APPROvAL FOLLOWING FACTORY INSPECTION TO DETERMINE CAUSE OF DEFECT. Tanks are subject to the applicable warranty only. The loss of chemicals within the tank are not covered by warranty. PHOTOS OR WARRANTY PARTS MUST ACCOMPANY THE WARRANTY CLAIM. Expenses, inconveniences, or other damages that may occur are not subject to warranty consideration. Warranty is void if the vessel or vessel lining failed because of inadequate support of vessel, misuse or lack of reasonable care, or use of chemical formulations not recommended by the vessel manufacturer. Check all labels for the information on known chemicals that are detrimental to vessel or vessel lining. User shall determine the suitability of the product for his intended use and assume all risks and liability in connection therewith. The salesman may have made statements about Broyhill products described in this warranty provision. Such statements do not constitute warranties, shall not be relied upon by buyer, and are not part of the warranty provision. The entire limited warranty is embodied in this writing. THE BROYHILL COMPANY NEITHER ASSUMES NOR AUTHORIzES ANY PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH ITS EqUIPMENT. Warranty parts or products reported within the warranty period must be returned to the factory transportation prepaid; they will be returned transportation prepaid; or digital photo must be emailed to [email protected] to determine if return of part is necessary. Parts furnished to The Broyhill Company by other manufacturers for resale or assembly by the Company are subject to the warranty of that manufacturer. Warranty claims will be processed by The Broyhill Company under that supplier company’s warranty when returned to The Broyhill Company transportation prepaid. MSDS sheets must accompany all returns for any/all chemicals that have passed through the parts. Note: some states do not allow limitations on how long an implied warranty lasts, nor do they allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

LABOR: Warranty labor will be included on Broyhill manufactured parts. THIS WILL INCLUDE ANY IMPROPER ASSEMBLY, WELDS, FABRICATION OF BROYHILL MANUFACTURED PARTS BUT NOT NORMAL NON-WARRANTED ITEMS OR ABUSED PARTS (I.E.; TRAvEL TIME, CHEMICALS, BELTS, STANDARD WEAR PARTS, CLUTCHES, ETC.). THIS IS AT A MAxIMUM RATE OF $80.00 PER HOUR WITH FACTORY CALCULATED TIMES FOR DOING WARRANTY PROCEDURES. Warranty labor excludes items not manufactured, assembled or limited by Broyhill (such as travel, chemicals, pumps, engines, drive trains, axles, hydraulic components, tanks, nozzles, hand guns, hoses, etc.) manufactured and warranted for the industry by allied component manufacturers. ALL WARRANTY WORk MUST BE PREAPPROvED BY BROYhILL FOR ANY CREDIT TO APPLY. ANY AND ALL WARRANTY WORk DONE PRIOR TO APPROvAL BY BROYhILL (IN WRITINg, FAxED OR EMAILED) WILL NOT BE COvERED. AT NO TIME WILL ANY EqUIPMENT WARRANTY TOTAL ExCEED MORE ThAN 10% OF ThE DEALER NET vALUE OF ThE EqUIPMENT IN qUESTION.

DROP ShIPMENTS: The Broyhill Company will allow shipments to be drop shipped from specific suppliers according to dealers request. There will be a $10.00 drop ship charge added to each invoice covering a customer’s order. Drop ship orders from Spraying Systems (TeeJet) will lose all dealer discounts, will be invoiced at list price, plus a $25.00 ‘hot’ order charge, plus $10.00 drop ship charges and shipping. TeeJet will ship UPS Next Day Air only and order must be in our office by 11:00 am CST.

hANDLINg ChARgE/PURChASE MINIMUMS: A handling charge will be added in the amount of $6.00 to each invoice exclusive of orders invoiced by the carrier. All orders must equal a minimum of $20.00 (customer’s cost/net) exclusive of drop ship charges, transportation, insurance and handling charg-es or invoice will be adjusted to equal the $20.00 minimum.

- CONTINUED -

This Policy, Terms & Conditions Supersedes All Other Policy, Terms & ConditionsForm 10695-31 10695-32VG/JD Copyright 09/09

ShIPMENTS: Orders accepted and all agreements are subject to delays occasioned by accidents, strikes, fires and causes beyond our con-trol. Shipments will be made by common carrier, f.o.b. factory or by parcel post or United Parcel Service. Charges for parcel post or United Parcel Service will be prepaid and insured and subsequently invoiced to the customer. Orders for merchandise received by mail, phone, email, or a Broyhill salesman, when designated for factory pickup by the customer, must specify a pickup date. Orders not picked up by the specified or notified date will be shipped by commercial means f.o.b. factory.

MERChANDISE DAMAgED IN ShIPMENT: Freight shipments are insured by the common carrier when the factory is the f.o.b. point. Freight should be inspected for any damage by the receiving party and claims should be filed with the delivering carrier. Title of the merchandise passes from the consignor (factory) to the consignee (customer) when the common carrier receives it at the shipping point. Merchandise shipped by The Broyhill Company to our customers to replace items lost or damaged by common carriers will be filled as a new order to the customer. Our customer should recover loss from the delivering carrier by a claim in the amount of the damage, which must be filed with the delivering carrier. If you receive all items and suspect concealed damage, note accordingly on the freight bill before you sign it. Be sure you receive all items listed on the freight bill. All shortages, damages and any other claims arising from the shipment delivery or factory pickup must be reported to us within ten days. We will not assume the responsibility for these shortages, damages and any other claims that are reported to us after 10 days. All shortages and dam-ages, which are our responsibility, will be replaced by similar parts or equipment at our earliest convenience.

CREDIT: Terms of sale are indicated on all invoices and are subject to payment accordingly. Orders received prior to establishment of credit will be subject to C.O.D., sight draft bill of lading or prepayment depending on our credit department’s judgement. The credit policy also will apply to those accounts in arrears at the time any particular order is received. 1 1/2% interest per month or 18% per annum will be charged on all accounts past due for thirty days or more. All negotiable instruments will bear interest at the same rate from the date of maturity. Any collection action neces-sary to recover monies properly due The Broyhill Company, as a result of orders received, accepted and shipped by us in good faith, will be decided by The Broyhill Company’s credit department or appointed collection agent. All expenses including court costs, collection and legal fees, involved in recovering monies due The Broyhill Company from such collection action will be at the cost of the debtor.

RETURNS FOR CREDIT: Merchandise may be returned for credit only if written authorization is issued by The Broyhill Company and a Broyhill Return Authorization number is issued to the customer. After the customer receives authorization, the merchandise must be returned freight prepaid.

Credit of up to 75% will be issued on the invoiced dealer cost of parts previously approved for return. Any special order parts placed by custom-ers are not subject to return privileges. A credit of up to 75% could be issued for equipment (models and items) approved for return. An additional charge will be made if the mer-chandise is accepted but received in less than a saleable condition; i.e., returned shipping damage. The additional charge may be more than what the item is worth. No credit will be given on limited storage life parts, i.e., pumps - broken or damaged or missing parts on items, models, items or parts stored outside and subject to rusting, oxidation of finish on tanks, paint, tires, etc., any items/parts that require refinishing or prepackaging or any inventory purchased prior to 12 months of any requested return. The burden of proof is on the customer wishing to return items that meet these requirements. Copies of invoices will be required proving purchase within the past 12-month period - subject to the above limitation. All returns must meet the unsold, unused, undamaged and complete (no repackaging or reconditioning) criteria to be subject to review for return authorization.

PRICINg: Prices in Broyhill’s literature are suggested list or as otherwise indicated. The Broyhill Company reserves the right to make changes in prices, designs, materials and/or specifications without notice and without liability therefore. Orders will be processed, unless noted to the con-trary; at the prices effective at the date order was received by Broyhill’s Sales Department. Sales literature is available in quantity. Freight charges for literature will be forwarded.

REBUILDINg SERvICES: Parts returned to Broyhill for repair may be sent on to an outside repair service depending on our judgement after receiving and inspecting the part. A net labor charge is made for this service plus parts used which will be invoiced to the customer at the applicable price. Parts shipped to us for repair should be sent transportation prepaid and tagged for identification. Repaired parts will be returned transportation collect. Repair work done for individuals or firms, which do not have a credit record established will be returned C.O.D. MSDS sheets must accom-pany all returns for any/all chemicals that have passed through the parts.

MINIMUM MODIFICATION ChARgE: A modification charge will be made when the factory is requested to modify existing cataloged equip-ment. Modification charge will be a minimum of $80.00 net and based according to modification difficulty, engineering, production and fabrication involvement. The charge will include parts plus $80.00 per hour factory time.

PACkAgINg: Broyhill products are shipped with standard packaging, paperboard or banding. Crating is available for either domestic or export shipping at additional cost. Any special packaging or bagging not provided in our standard cost will be subject to additional cost.

Broyhill Instant Access Minimum Order Hypro Warranty Broyhill Warranty Sales Order: 800.228.1003 X34 $20.00 (dealer cost) Call 800.468.3428 Call 800.228.1003 x34 Fax: 402.987.3601 less shipping Service & Warranty An RGA number must E-Mail: [email protected] & handling charges. on Hypro Pumps. be issued before you return Broyhill.com any product for warranty.-48-



-49-

Notes:



-50-

Notes:

PARTS ORDER FORM

Broyhill Instant Access Minimum Order Hypro Warranty Broyhill Warranty Sales Order: 800.228.1003 X34 $20.00 (dealer cost) Call 800.468.3428 Call 800.228.1003 x34 Fax: 402.987.3601 less shipping Service & Warranty An RGA number must E-Mail: [email protected] & handling charges. on Hypro Pumps. be issued before you return Broyhill.com any product for warranty.

Ordered By: ________________________________________________________________________________________

Name: _____________________________________________________________________________________________

Company: __________________________________________________________________________________________

Shipping Address: ____________________________________________________________________________________

City: ________________________________________________________ State: _______________ Zip: ______________

Phone: ___________________________________________ Fax: _____________________________________________

E-mail: ____________________________________________________________________________________________

Part No. Quan. Description

____________________________________________________________________________________________

____________________________________________________________________________________________

____________________________________________________________________________________________

____________________________________________________________________________________________

____________________________________________________________________________________________

____________________________________________________________________________________________

____________________________________________________________________________________________

____________________________________________________________________________________________

____________________________________________________________________________________________

____________________________________________________________________________________________

____________________________________________________________________________________________

Are we shipping to your customer? If yes, please fill in the following:

Name: _____________________________________________________________________________________________

Address: ___________________________________________________________________________________________

City, State, Zip: ______________________________________________________________________________________

Ship Via: ___________________________________________________________________________________________

One North Market Square • PO Box 475Dakota City, NE 68731-0475

Documents

Broyhill Sprayer Products