Book Cover Love

7/27/2019 Book Cover Love

1/16

LOVEBOOK COVER

DESIGN PR OJECT


2/162/16WWW.CREATE-YOUR-STYLE.COM

BOOK COVER LOVE

Article Product Group Article No. Amount Size Colour Colour Code

Single Stone Settings 11990510mh2C F1H 4744 F 001 15 pcs. 10 mm Crystal 001

Beads 5742 5 pcs. 10 mm Siam 208

Supplies

2x Cardboard, beige, 0.5, 34 x 23 cm

2x Cardboard, beige, 0.3, 33.5 x 21 cm

2x Dacron filling material, 34 x 23 cm

2x Fabric satin, beige, 33 x 44 cm

4 m Nylon thread, transparent, 0.25 mm

55 cm Ribbon satin, cream, 1 cm

1 spool Sewing silk

40 x Sheets of paper, white, A4

Tools

Cutter

Double sided sticky tape

Flat nose pliers

Needle

Pins

Puncher

Ruler

Tape

Tweezers

CRYSTALLIZED Swarovski Elements Supplies & Tools

Sewing

STEP 1

Level of design: ADVANCED

Have also a look at the text instruction at the last page!

0.5 mm

1:4

23 cm

34 cm Scale 1:4



R epeat step x1

21 cm

33.5 cm

0.3 mm

2.2 cm

2

2

Step 2

1 2

R epeast step x1

1STEP 2

Repeat step x1

Repeat step x1Step 3

R epeat step x1

23 cm

34 cm

Step 3

23 cm

34 cm

STEP 3

Repeat step x1



Step 4

R epeat step x144 cm

33 cm

STEP 4

Repeat step x1



1:2

STEP 5

Scale 1:2



STEP 6



STEP 7



ep 9

6 cm 5.6 cm

R epeat step 5 - 8 x1

STEP 8

STEP 9

Repeat steps 5 - 8 x1



5.6 cm 5.6 cm 5.6 cm 6 cm

4.5 cm

4.5 cm

5 cm

5 cm

5 cm

Step 10

70 cm

x4

STEP 10



Step 11

R epeat x2

R epeat step 11 x19

STEP 11

Repeat step 11 x19Repeat x2



Step 12STEP 12



R epeat step 12 x1step 12 x1

1.5 cm

1.5 cm

Repeat step 12 x1



STEP 13



Step 14


16/16

CREATE YOU R ST YLE with CRYSTALLIZED Swarovski Elem ents Design Project

B ook C over Love

STEP 1: Cut 2 pieces (23 x 34 cm) of 0.5 mm card board and 2 pieces (33.5 x 21 cm) of 0.3 mm card board.

STEP 2: Take the 0.3 mm card board, score with cutter after 2.2 cm in from edge - do not cut all the way through.

Punch 2 holes with punching pliers (see illustration) . R epeat step with 2nd 0.3 mm card board piece.

STEP 3: Cut 2 pieces (23 x 34 cm) of Dacron.

STEP 4: Cut 2 pieces (44 x 33 cm) from the satin fabric.

STEP 5: Put the layers together start with 1 piece of satin ( wrong side up) then 1 piece of Dacron and then

1 piece of 0.5 mm thick card board.

STEP 6: Bend the fabric over card board as you see in i llustration and fi x it with some tape.

STEP 7: Affi x the corners with some tape and fold the fabric above card board as you see in illustration.

STEP 8: Fold and tape the last two sides. R epeat steps 5 8 to get the second cover of book.

STEP 9: Thread sewing needle with sewing silk and sew lines as you see in illustration ( threads will be

removed later on).

STEP 10: Cut 70 cm of nylon thread and sew on inside of cover well with back stitches. Punch a hole with pin where the

fi rst two sewing silk threads cross.

STEP 11:

Stitch with needle and nylon thread to front side of cover and slide on fi rst CRYSTA LLIZED Bead and stitchto back side. Stitch to front side again and go a 2nd time through the Bead. R epeat step 19 times with other

CR YSTA LLIZED Beads and Fancy Stone Settings in the order that you see in the illustration.

STEP 12: Attach double sided sticky tape onto 0.3 mm card board and glue it onto back side of cover as you see in

illustration. T hen repeat this step for 2nd cover (which you made in step 8). Slide the satin ribbon through the

holes of 1st card board (see illustration).

STEP 13: Punch holes into the sheets of paper as you see in illustration and thread satin ribbon through the holes. Slide

satin ribbon through holes of second card board. Tie a bow and cut off excess with scissors.

Documents

Book Cover Love