Embed Size (px)
Citation preview
“LOVE”BOOK COVER
DESIGN PROJECT
2 /16 WWW.CREATE-YOUR-STYLE.COM
BOOK COVER “LOVE”
Article Product Group Article No. Amount Size Colour Colour Code
Single Stone Settings 11990510mh2C F1H 4744 F 001 15 pcs. 10 mm Crystal 001
Beads 5742 5 pcs. 10 mm Siam 208
Supplies
2x Cardboard, beige, 0.5, 34 x 23 cm2x Cardboard, beige, 0.3, 33.5 x 21 cm2x Dacron fi lling material, 34 x 23 cm2x Fabric satin, beige, 33 x 44 cm4 m Nylon thread, transparent, 0.25 mm55 cm Ribbon satin, cream, 1 cm1 spool Sewing silk40 x Sheets of paper, white, A4
Tools
CutterDouble sided sticky tapeFlat nose pliersNeedlePinsPuncherRulerTapeTweezers
CRYSTALLIZED™ – Swarovski Elements Supplies & Tools
Sewing
STEP 1
Level of design: ADVANCED
Have also a look at the text instruction at the last page!
0.5 mm
1:4
23 cm
34 cm Scale 1:4
3 /16 WWW.CREATE-YOUR-STYLE.COM
Repeat step x1
21 cm
33.5 cm
0.3 mm
2.2 cm
2
2
Step 2
1 2
Repeast step x1
1STEP 2
Repeat step x1
Repeat step x1
Step 3
Repeat step x1
23 cm
34 cm
Step 3
23 cm
34 cm
STEP 3
Repeat step x1
4 /16 WWW.CREATE-YOUR-STYLE.COM
Step 4
Repeat step x144 cm
33 cm
STEP 4
Repeat step x1
5 /16 WWW.CREATE-YOUR-STYLE.COM
1:2
STEP 5
Scale 1:2
6 /16 WWW.CREATE-YOUR-STYLE.COM
STEP 6
7 /16 WWW.CREATE-YOUR-STYLE.COM
STEP 7
8 /16 WWW.CREATE-YOUR-STYLE.COM
tep 9
6 cm 5.6 cm
Repeat step 5 - 8 x1
STEP 8
STEP 9
Repeat steps 5 - 8 x1
9 /16 WWW.CREATE-YOUR-STYLE.COM
5.6 cm 5.6 cm 5.6 cm 6 cm
4.5 cm
4.5 cm
5 cm
5 cm
5 cm
Step 10
70 cm
x4
STEP 10
10 /16 WWW.CREATE-YOUR-STYLE.COM
Step 11
Repeat x2Repeat step 11 x19
STEP 11
Repeat step 11 x19Repeat x2
11 /16 WWW.CREATE-YOUR-STYLE.COM
Step 12STEP 12
12 /16 WWW.CREATE-YOUR-STYLE.COM
Repeat step 12 x1step 12 xx11
1.5 cm
1.5 cm
Repeat step 12 x1
13 /16 WWW.CREATE-YOUR-STYLE.COM
STEP 13
14 /16 WWW.CREATE-YOUR-STYLE.COM
Step 14
15 /16 WWW.CREATE-YOUR-STYLE.COM
16 /16 WWW.CREATE-YOUR-STYLE.COM
CREATE YOUR STYLE with CRYSTALLIZED™ – Swarovski Elements Design Project Book Cover “Love”
STEP 1: Cut 2 pieces (23 x 34 cm) of 0.5 mm card board and 2 pieces (33.5 x 21 cm) of 0.3 mm card board.
STEP 2: Take the 0.3 mm card board, score with cutter after 2.2 cm in from edge - do not cut all the way through. Punch 2 holes with punching pliers (see illustration). Repeat step with 2nd 0.3 mm card board piece.
STEP 3: Cut 2 pieces (23 x 34 cm) of Dacron.
STEP 4: Cut 2 pieces (44 x 33 cm) from the satin fabric.
STEP 5: Put the layers together – start with 1 piece of satin (wrong side up) – then 1 piece of Dacron and then 1 piece of 0.5 mm thick card board.
STEP 6: Bend the fabric over card board as you see in illustration and fi x it with some tape.
STEP 7: Affi x the corners with some tape and fold the fabric above card board as you see in illustration.
STEP 8: Fold and tape the last two sides. Repeat steps 5 – 8 to get the second cover of book.
STEP 9: Thread sewing needle with sewing silk and sew lines as you see in illustration (threads will be removed later on).
STEP 10: Cut 70 cm of nylon thread and sew on inside of cover well with back stitches. Punch a hole with pin where the fi rst two sewing silk threads cross.
STEP 11: Stitch with needle and nylon thread to front side of cover and slide on fi rst CRYSTALLIZED™ Bead and stitch to back side. Stitch to front side again and go a 2nd time through the Bead. Repeat step 19 times with other CRYSTALLIZED™ Beads and Fancy Stone Settings in the order that you see in the illustration.
STEP 12: Attach double sided sticky tape onto 0.3 mm card board and glue it onto back side of cover as you see in illustration. Then repeat this step for 2nd cover (which you made in step 8). Slide the satin ribbon through the holes of 1st card board (see illustration).
STEP 13: Punch holes into the sheets of paper as you see in illustration and thread satin ribbon through the holes. Slide satin ribbon through holes of second card board. Tie a bow and cut off excess with scissors.
