BANK OF BARODA BANK OF BARODABARODA...Tender- Interior Renovation work of Bank of Baroda, Savargaon Branch, Nagpur Region, Maharashtra. Architects S. Nandedkar & Associates - Nagpur

Tender- Interior Renovation work of Bank of Baroda, Savargaon Branch, Nagpur Region, Maharashtra.

Architects S. Nandedkar & Associates - Nagpur 1

BANK OF BANK OF BANK OF BANK OF BARODABARODABARODABARODA

Financial Bid

Interior Renovation Work Bank of Baroda

Savargaon Branch, Nagpur Region, Maharashtra.

OWNER

Dy.Dy.Dy.Dy. General ManagerGeneral ManagerGeneral ManagerGeneral Manager

Bank of Baroda

Regional Office

Nagpur (M.S.)

ArchitectsArchitectsArchitectsArchitects



Financial Bid



INDEX

a. List of Approved Materials 04

b. Schedule B for Interior Work 05

c. Interior Drawings 17



LIST OF APPROVED MATERIALS: FOR INTERIOR RENOVATION WORK

NOTE:

1. No deviation permissible.

2. Wherever Contractor proposes to use ‘equivalent’ makes (i.e. other than specified) the

same shall be done only after prior approval from Architect. Any additional expenditure

time due to this will be on Contractors account and no claims will be entertained.

3. All materials to be used shall be of first quality unless otherwise specified and as

prescribed in Banks Standard Manual.

4. Contractor shall produce proof of purchase and use of the approved material as

prescribed by the Architect, from the company/ manufacturer at the time of presenting

running bill and the final bill.

S.No. ITEM

MAKE

1. ALUMINUM COMPOSITE PANEL ALCOBOND/ALTOMATT/TIMEXBOND

2 PLY WOOD EURO/ CENTURY PLY/ANCHOR/GREEN(OPTIMA

RED)/MAYUR/RAMA PLY/ASSOCIATE

3 LAMINATES

MERINO/ EURO /CENTURY/ASSOCIATE OR AS

DIRECTED BY ARCHITECT

4 STRUCTURAL GLASS

Modiguard, Saint-gobain

5 DOOR CLOSER / FLOOR SPRINGS

OZONE, GODREJ

NOTE: WRITTEN CONSENT OF MANUFACTURER ALONG

WITH OPERATIONAL WARRANTY MUST BE OBTAINED WITH

REFERENCE TO THE LOCATION, SIZE, THICKNESS AND

WEIGHT OF THE DOOR. BANK RESERVES THE RIGHT TO

DEDUCT THE ENTIRE COST OF THIS ITEM FROM

RETENTION AMOUNT IF THE FIXTURE DOES NOT

PERFORM AS EXPECTED.

6 BLINDS, CURTAIN TRACK VISTA OR EQUIVALENT AS DIRECTED BY THE ARCHITECT

7 GYPSUM BOARD/MODULAR

SAINT GOBAIN-GYPROC./ARMSTRONG

8 INTERNAL PAINT Asian / ICI

9 EXTERIOR PAINT Ace/ Weather coat

10 KEY BOARD & CPU TROLLY

Ebco make (Metallic only)

11 VITRIFIED TILES

JOHNSON, ASIAN, NITCO, KAJARIA, SIMPOLO



SCSCSCSCHEDULEHEDULEHEDULEHEDULE----BBBB

Interior Work: Interior Work: Interior Work: Interior Work: Bank of Baroda, , , , SAVARGAON BRANCH, NAGPUR REGION, SAVARGAON BRANCH, NAGPUR REGION, SAVARGAON BRANCH, NAGPUR REGION, SAVARGAON BRANCH, NAGPUR REGION,

MAHARASHTRA.MAHARASHTRA.MAHARASHTRA.MAHARASHTRA.

SR.NO ITEM UNIT QTY. RATE AMOUNT

1 Providing & fixing 1.30 meter high Partition with

6mm thick commercial ply to either side of the

frame of 50 mm x 50 mm x 1mm Aluminum

sections at less than 610 mm c/c in both directions

as per architectural drawing including 1 mm thick

laminate of approved shade and make in multi

colours, having 2mm grooves as per drawing, 10

mm thick etched glass panel with pencil edging fixed

with ‘D’ clips, including three coats of French polish

to teak wood members. The item also includes

grouting frame in wall/ floor etc. complete.

SQ.M 10.00

Rate in Words-Rupees-

2 Providing & fixing 65mm thick Full height partially

glazed partition with 6mm thick commercial ply to

either side of frame of 50 mm x 50 mm x 1mm

Aluminium sections at 610 mm c/c in both direction

with 1 mm thick laminate of approved shade and

make on both side with 6 mm thick clear etched

glass panel, including 33 x 25 mm size T.W. door

frame to stop fully glazed door shutter out of 35mm

thk. Solid core BWP Flush door panel duly cut

forming 150mm rails & styles with 1mm thk.

Laminate of approved make & shade as per drawing & to hold 8 mm thick clear etched glass with T.W.

beading, 300mm Brush finish S.S. handles, Mortised

lock, door closer, door stopper and three coats of

French polish of approved shade to all exposed

T.W. members (Al. sections shall carry upto slab

with required grouting in wall/slab soffit.

Measurement up to ceiling only will be paid.)

SQ.M 10.00


3 Providing & fixing 65mm thick Full height Dead

partition with 6mm thick commercial ply to either

side of frame of 50 mm x 50 mm x 1mm Aluminium

sections at 610 mm c/c in both direction with 1 mm

thick laminate of approved shade and make on both

side, including 33 x 25 mm size T.W. door frame to

stop fully glazed door shutter out of 35mm thk.

Solid core BWR Flush door panel duly cut forming

150mm rails & styles with 1mm thk. Laminate of

approved make & shade as per drawing with T.W.

beading, 300mm Brush finish S.S. handles, Mortised

lock, door closer, door stopper and three coats of

French polish of approved shade to all exposed

T.W. members (Al. sections shall carry upto slab

with required grouting in wall/slab soffit.

Measurement up to ceiling only will be paid.)

SQ.M 7.00




4 Providing & Fixing Writing desk out of 18mm thk

.Commercial ply with 1mm laminate of approved

make & shade including 8mm plain glass fixed in ply

boxing as per detail drawing with required T.W.

beading having minimum 03 coats of French polish

with finishing etc. complete.

NO 1.00


5 Providing & fixing in position 1200mm high, 430mm

deep Storage Cabinet made of 18 mm commercial

ply at top front and side with 6 mm commercial ply

at back, finished with 1 mm thk laminate to all

exposed surfaces & 0.8mm thk. Laminate to all

internal surfaces, including remaining internal

surfaces painted with three coats of synthetic

enamel paint over a single coat of primer, with

locking and handle arrangement of approved make

complete with open able type shutter, T.W lipping

to exposed ply edges with French polish and

finishing etc complete.

SQ.M 5.00


6 Providing and fixing as per approved make 100 mm

wide vertical fabric blinds complete with handling

chain, sliding & tilting system in drawn position,

fabric vanes to overlap by minimum 10 mm (every 1

m. length to have at least 12 Nos. 100 mm wide

fabric-vanes).Length of blinds bottom end to be at

least 12 mm from horizontal surface fabric strip as

that of fabric vanes, to be fixed on both sides on

aluminum top channel. Lower end of vanes to be

weighed down & tight with each other on both

corners with ball chains .Items to be completed in all

respects including fixing with brackets on wall or

partition with rawl plugs.

SQ.M 4.00


7 Providing & fixing Notice Board 1000 x 750 mm

made up of 12 mm soft board fixed on 6 mm

commercial ply & fully covered by approved

upholstery with 25 mm x 18 mm T.W. beading on

periphery including three coats of French polish of

approved shade & colour etc. complete.

No. 2.00


10 Providing and fixing MS powder coated three

seater units with handle including all necessary

fittings & fasteners etc. complete. (Sample shall be

got approved by Architect)

Nos. 2.00

GRAND TOTAL

In Words Rupees________________________________________________________________ Date: Place:

Signature & Seal of the Contractor



Abstract of Schedule B

Schedule B Amount in Rupees 1 Schedule B for Work

Final Total Amount Put to Tender

Total Amount Put to Tender (in Words):

Signature & Seal of the Tenderer FOR OFFICE USE ONLY

Documents

BANK OF BARODA BANK OF BARODABARODA...Tender- Interior Renovation work of Bank of Baroda, Savargaon Branch, Nagpur Region, Maharashtra. Architects S. Nandedkar & Associates - Nagpur