AUTO PRODUCE BOSS CATALOG 2006

Auto Produce Boss, Ltd. 1370 Kawaishinden

Nagano-shi Japan 380-0913

Table of Contents

About Auto Produce Boss - Profile 3

P R O D U C T S

Exhuast Manifold 4

Turbo Outlet Pipe 6

Downpipe 7

Exhaust System 10

Surge Tank 12

Suction Pipe 13

LAP Fuel Injection Kit 14

LAP ROM tune 16

LAP Original Fuel Injector 18

Fuel Injection System 20

Other Parts 22

Carbon Parts 24

Auto Produce Boss is always incorporating cutting edge technology in order to meet the demands of the "Street Car" world; where "Speed" is achieved from the culmination of consistent and safe performance. In this level of motorsports, 1/1000th of a second is the determining factor of competition. We strive to be the "Professional Force" who supports the motorsport and tuning activities of the leaders of the street car world, the automotive manufacturers and aftermarket manufacturers. In the racing world, we have provided CPUs and exhaust manifolds to various JGTC teams. We have also provided many N1 endurance teams with our CPUs, resulting in numerous records. With street cars, we have set many record setting times at time attack events held by different media at Tsukuba Circuit. More recently, we have been involved in the preparation of vehicles for the All Japan Professional Drift Series(D1) and have gained the trust and respect from many top level drivers. By placing ourselves in the "Street Car" world through parts development, we have become well versed in CPU tuning during a time where automotive electronic parts are making continuous advancements. Keeping CPU tuning at the heart, we also strive in parts development such as exhaust components, providing a constant link between race vehicles and the street cars. The knowledge and skills acquired through our activities is applied to the services of other parts manufacturers in the form of research and development for suspension systems(ie. shocks, springs, pillow ball control arms etc.) From motorsports to the street and the street to motorsports. We are constantly active to providing a link between the street and motorsports. All of the knowledge acquired through our activities is applied to each and every product we develop. We are constantly striving to produce parts by looking at the car as a whole; by clarifying the purpose of each part and not looking at it on an individual basis. Company Data Company name: Auto Produce Boss Ltd. Address: 1370 Kawaishinden, Nagano-shi 380-0913 TEL: 026-266-6388 FAX: 026-266-6387 Opening date: September, 1991 Incorporation date: November, 1996

Exhaust Manifolds – Boss parts are designed with the strictest performance in mind. Our parts are not showy, but work properly and effectively. Anything less is a waste.

Image Engine Vehicle Price Description

SR20DET PS13/ S14/ S15 ￥136,500 T25 flange for stock, HKS, Trust and IHI turbos

SR20DET S14/ S15 ￥144,900 Manifold designed for Yasuyuki Kazama(Kei Office) Custom made to order

SR20DET S14/ S15 ￥207,900 For HKS 3037 turbocharger

CA18DET RS/S13 ￥136,500 T25 flange for factory turbo

CA18DET RS/S13 ￥136,500 To change turbo position when using after market turbo(HKS, Trust, IHI)

RB26DETT BNR32, BNR33, BNR34

￥172,200 2pcs

4G63 CD/CE9A ￥144,900 Replacement manifold for factory turbo

4G63 CN/ P/ T9A ￥144,900 Replacement manifold for factory turbo(For JDM engine only)

4G63 CN/ P/ T9A Ask Manifold for External Wastegate(JDM engine only) note: Made to order

GDB EJ207C, E ￥136,500 Made to order for JDM Engine after C

JZA80 2JZ ￥417,900 Custom made to order(In house only)

4AG AE86 ￥168,000 For turbo application

4AG AE86 ￥115,500 Custom made to order

EK9 B16B Ask Titanium custom made to order

RB20DET/ RB25DET

A31, HR32, ECR33, ER34

￥188,000 3pcs manifold, outlet pipe and suction pipe. T25 flange for upgrage turbo

4G63 EVO 1, 2, 3 ￥197,400 Turbo upgrade kit

Manifold, outlet pipe and suction. T25 flange for turbo upgrade

Turbo Outlet Pipes Image Engine Vehicle Size Price Description

SR20DET R, PS13/ S14/ S15 70mm ￥40,950 O2 sensor bung included

SR20DET R, PS13/ S14/ S15 75mm ￥44,100 O2 sensor bung included

CA18DET S13/ RS13 70mm ￥40,950 For factory turbo, O2 sensor bung

CA18DET S13/ RS13 70mm ￥40,950 For upgraded turbo, O2 sensor bung

RB25DET R33, ER34 70mm ￥40,950 Type M

RB26DETT BNR32, BNR33, BNR34 76.3mm ￥81,900 2 pipes in set

4G63 CD/ CE9A 70mm ￥50,400 For factory turbo, Changes to EVO III flange

4G63 CN/ CP9A 70mm ￥50,400 For factory turbo, O2 sensor bung

4G63 CT9A 70mm ￥50,400 For factory turbo, O2 sensor bung

Down Pipe *Due to the fluctuating price, please contact us on pricing for all parts made out of titanium.

Image Vechicle Material Size Price Description

PS. RPS13 / S14 Stainless 80mm ￥30,240 Stock Turbo

PS. RPS13 / S14 Stainless 75mm ￥29,190 Stock Turbo

S15 Stainless 80mm ￥30,240 Stock Turbo

S15 Stainless 75mm ￥29,190 Stock Turbo

PS. RPS13 / S14 Steel, Heat Coated 80mm ￥24,150 Stock Turbo

PS. RPS13 / S14 Steel, Heat Coated 75mm ￥23,100 Stock Turbo

S15 Steel, Heat Coated 80mm ￥24,150 Stock Turbo

S15 Steel, Heat Coated 75mm ￥23,100 Stock Turbo

EVO 4, 5, 6 Stainless 80mm ￥30,240 Stock Turbo

EVO 4, 5, 6 Stainless 75mm ￥29,190 Stock Turbo

EVO 4, 5, 6 Steel, Heat Coated 80mm ￥24,150 Stock Turbo

EVO 4, 5, 6 Steel, Heat Coated 75mm ￥23,100 Stock Turbo

EVO 4, 5, 6 w/ WG Stainless 80mm ￥39,900 With wastegate

EVO 7, 8 MR Steel, Heat Coated 75mm ￥23,100 Stock Turbo

EVO 7, 8 MR Steel, Heat Coated 80mm ￥24,150 Stock Turbo

EVO 7, 8 MR Stainless 75mm ￥29,190 Stock Turbo

EVO 7, 8 MR Stainless 80mm ￥30,240 Stock Turbo

JZA80 Stainless 80mm ￥30,240 Stock Turbo

EVO 4, 5, 6 Titanium 75, 80mm Ask Stock Turbo

EVO 7, 8 MR Titanium 80mm Ask Stock Turbo

PS. RPS13 / S14 Titanium 75, 80mm Ask Stock Turbo

S15 Titanium 75, 80mm Ask Stock Turbo

JZA80 Titanium 80mm Ask Stock Turbo

R32 GT-R Titanium 80mm Ask Stock Turbo

Exhaust System All the following exhaust systems are made out of titanium. They are also available in a stainless version at half the listed price. *Note: Due to the fluctuating cost of titanium, please contact us on pricing for all mufflers.

Photo Vehicle Muffler Type Price Description

R/ PS13/ S14/ S15 Type 1 Ask N1 style canister for high flow

R/ PS13/ S14/ S15 Type 2 Ask Oval type canister for quiet

operation

EVO 4, 5, 6 G-type Ask Gymkana-spec exhaust

EVO 4, 5, 6 H-Type Ask Straight piping design for highest flow, Fires to the right.

EK9 Type 2 Ask Oval type canister for quiet operation

GC8 G-Type Ask Gymkana-spec exhaust

GDB Type 2 Ask Available for type A-E, Type E differs from the rest.

JZA80 Type 2 Ask 90mm piping

R32/ R33/ R34 Type 2 Ask 90mm piping

Z33 Type 2 Ask Dual muffler

Z33 Type 2 Ask True dual exhaust system

Surge Tank Photos Engine Vehicle Price Description

CA18DET S13/ RS13 ￥302,400 Complete set with Intake manifold(not pictured), plenum and 70mm throttle

body

CA18DET S13/ RS13 ￥207,900 Plenum and 70mm throttle body

CA18DET S13/ RS13 ￥176,400 Plenum only(minus pictured throttle body)

4G63 EVO 4-8 ￥207,900 Plenum only

Throttle Adaptor Universal ￥6,825 Flange for N15 pulsar throttle body

Throttle Body N15 Pulsar ￥19,110 70mm throttle body For over size application

Intake - Under boost conditions above stock levels, the factory suction pipe has a tendency to fail or collapse. Changing it to a hard pipe gives a more consistent boost characteristic. Each one of our kits are custom made to order at our facility.

Photo Vehicle Price Description

BNR32 ￥102,900 Suction Pipe Kit

R32 ￥40,950 Suction Pipe Kit

ECR33 ￥40,950 Suction Pipe Kit

R/PS13 ￥40,950 Suction Pipe Kit

S14/ 15 ￥40,950 Suction Pipe Kit

EVO 4/ 5/ 6 ￥39,900 Suction Pipe Kit

EVO 7/ 8 MR/ 9 ￥39,900 Suction Pipe Kit

EVO 4/ 5/ 6 ￥71,400 I/C Pipe kit

LAP Injection Kit – Boss fuel injection kits are designed to compliment a tuned vehicle. It is necessary to match the fuel tuning to the parts installed on the engine. With our injection kits, you could be assured that your fuel and ignition is tailored to the upgraded parts you have installed in your engine.

Photo Engine Price Parts included

SR20DET ￥260,400 LAP rom tune, Injectors(550cc), Injector holder, Z32 air flow meter, R33 fuel pump, adaptor kit

SR20DET ￥270,900 above plus filter adaptor kit and filter

CA18DET ￥228,900 Lap rom tune, Injectors(530cc), Z32 air flow meter, R33 fuel pump, air flow meter adaptor

CA18DET ￥239,400 above plus filter adaptor kit and filter

RB26DETT ￥260,400 Lap rom tune, Injectors, Z32 air flow meter, air flow meter harness

RB26DETT ￥291,900 above plus filter adaptor kit and filter

RB20DET ￥260,400 Lap rom tune, Injectors(550cc) Z32 air flow meter, air flow meter harness, R33 fuel pump

RB20DET ￥270,900 above plus filter adaptor kit and filter

EJ20 ￥197,400 LAP rom tune, Z32 air flow meter, R33 fuel pump, air flow meter harness, Nismo fuel regulator

EJ20 ￥207,900 above plus filter adaptor kit and filter

4G63 ￥197,400 LAP rom tune, Injectors(660cc), 2JZ fuel pump, Pump relay

4G63 ￥228,900 LAP rom tune, Injectors(660cc), 2JZ fuel pump, pump relay, harness adaptor for EVO 4

4AG ￥165,900 LAP rom tune, Injector(210cc)

4AG ￥273,000 For N/A - includes Apexi PowerFC, Harness(by Neko), Data, Injectors(327cc), Z32 air flow meter

4AG ￥291,900 For Turbo application - includes Apexi PowerFC,

Harness(by Neko), Data, Injectors(327cc), Z32 air flow meter

LAP Rom Tune – From our years of experience, we offer our full line of ECU programming. Using a our state of the art tools(Data logger, A/F meter, 4WD Dynapack) and a combination of street and track testing. You can be assured that our ECU’s will provide power and the assurance that your engine is running at safe levels.

Photo Maker Type Price

Toyota EP71/ AE86 ￥100,800

Toyota EP82 /AE101 /SW /ST /JZX /JZS 1 CPU Type ￥144,900

Toyota SW /ST /JZX /JZA /JZS 2 CPU Type ￥197,400

Toyota JZX100 3 CPU Type ￥249,900

Nissan S13/ R32/ Z32 EPROM Type ￥102,900

Nissan R. PS13 /S14 /R33 /Z32 New ￥117,600

Nissan Z33 ￥102,900

Nissan M35 ￥102,900

Mitsubishi C73 /CA4A /CD5 /CD9A /CE9A ￥102,900

Mitsubishi CN9A /Z16A ￥144,900

Mitsubishi EVO 5, 6, 7, 8 MR ￥102,900

Mitsubishi EVO 7, 8 MR Active Center Differntial ￥50,400

Mazda FC3S ￥102,900

Mazda FD3S ￥144,900

Subaru GC8/ BD5/ BG5 (EJ20G) ￥117,600

Subaru GC8/ BD/ BG (EJ20K) ￥144,900

Subaru GDB (EJ207) ￥102,900

LAP Original Injector – From the tuner’s stand point, fuel injectors are a critical part in an engine. We are very particular about the type of injector that we use. For this we developed our own line of injectors. It is a small price to pay for the life of your engine. *All parts should be installed by a qualified mechanic as improper installation may cause leakage, fire hazard or engine failure.

Photo Type Price Description

550cc ￥13,125 Available in top feed for RB20DET and side feed for SR20DET and RB25DET

700cc ￥13,125 Top feed for RB26DETT, CA18DET and N14 Pulsar

534cc ￥13,125 Top feed for RB26DETT, CA18DET and N14 Pulsar

660cc ￥13,125 Top feed for RB26DETT, CA18DET and N14 Pulsar

210cc ￥13,125 Top feed for AE86

295cc ￥13,125 Top feed for AE86

327cc ￥13,125 Top feed for AE86

850cc ￥13,125 Side feed for SR20DET and RB25DET

540cc ￥13,125 Side feed for 1JZ, 2JZ and VG30DETT

530cc ￥13,125 Top feed injector

550cc SF ￥3,675 Injector Holder, price per injector holder

850cc SF ￥2,625 Injector Holder, price per injector holder

Fuel Injection System Photo Parts Vehicle Price Description

Pump relay harness EVO 4, 5 ￥14,175 Keeps pump voltage constant

Pump relay harness EVO 6 ￥14,175 Keeps pump voltage constant

Pump relay harness EVO 7, 8 MR, 9 ￥14,175 Keeps pump voltage constant

Fuel Pump 2JZ ￥23,415 Factory part

Fuel Pump Coupler 2JZ ￥1,050 Coupler for wiring 2JZ pump

Fuel Pump R33 ￥29,820 Factory part

Fuel Pump EVO 7, 8 MR, 9 ￥29,400 240L/ hr (pump relay highly recommended)

Airflow meter Z32 ￥34,545 For increased boost setting

Air flow meter adaptor SR20 ￥15,750 Adapts Z32 meter to suction pipe

Airflow meter adaptor kit SR20 ￥21,000 Includes adaptor and harness

Airflow meter harness SR20 ￥6,000 for Z32 air flow meter

Z32 MAF Air filter adaptor SR20 ￥7,000 for Blitz filter type C4

Z32 MAF Air filter adaptor SR20 ￥6,300 for K&N filter

Z32 adaptor kit for K&N filter SR20 ￥12,075 (includes filter)

LAP Original Parts - Boss parts are designed with the strictest performance in mind. Our parts are not showy, but work properly and effectively. Anything less is trivial.

Photo Parts Vehicle Price Description

Harness Protector R/ PS13 ￥5,460 Inner fender wiring harness guard

Harness Protector S14/ S15 ￥3,990 Inner fender wiring harness guard

Conversion harness EVO 8 ￥52,500 Converts EVO 8 to run on EVO 7 ECU

NVCS adjustment pulley S14/ S15 ￥43,365 Without core exchange

NVCS pulley S14/ S15 ￥30,240 With core exchange

Turbo water line R/ PS13 ￥39,900 Steel braided line and fittings

Turbo oil line R/ PS13 ￥16,590 Steel braided line and fittings

Turbo water line S14 ￥39,900 Steel braided line and fittings

Turbo oil line S14 ￥16,590 Steel braided line and fittings

Turbo oil line S15 ￥16,590 Steel braided line and fittings

Turbo oil line GC8 ￥16,590 Steel braided line and fittings

Air separator tank Universal ￥39,900 Tank only

Air separator tank set Universal ￥60,900 Set includes fittings and hoses

A/F Meter install kit Titanium ￥4,200 Includes bung, washer and plug bolt

A/F Meter install kit Stainless ￥2,625 Includes bung, washer and plug bolt

A/F Meter install kit Steel ￥2,100 Includes bung, washer and plug bolt

A/F Meter bung Titanium ￥3,150 O2 bung only

A/F Meter bung Stainless ￥1,575 O2 bung only

A/F Meter bung Steel ￥1,050 O2 bung only

Flange adaptor S13 ￥3,150 Flange adaptor for S15 turbo conversion

Carbon Parts – Besides power, weight and aerodynamics play a critical role in speed. For this, we have developed a line of parts to provide sufficient down-force and be efficiently light-weight. This is a cheap yet effective way to increase speed.

Photo Vehicle Price Description

S14 ￥102,900 Hood, Kouki only

S15 ￥102,900 Carbon fiber hood Original lap design

S14 L/ R ￥102,900 Door, Weight: 4Kg Price is per door

S15 L/ R ￥102,900 Door, Weight: 4.8Kg Price is per door

S14 ￥98,700 Trunk, Weight: 7Kg Kouki only

EVO 5, 6 ￥51,240 3D Rear Wing, For painted version please add ¥15,750

EVO 7 ￥51,240 3D Rear Wing, For painted version please add ¥15,750

GDB ￥61,740 3D Rear Wing (Top), Carbon fiber

GDB ￥40,740 3D Rear Wing (Top), Fiber glass (painted black)

GDB ￥61,740 3D Rear Wing (Bottom), Carbon fiber

GDB ￥40,740 3D Rear Wing (Bottom), Fiber glass (painted black)

GDB ￥113,400 3D Rear Wing Complete, Carbon fiber

GDB ￥71,400 3D Rear Wing Complete, Fiber glass (painted black)

Note: Kouki refers to after minor change. Zenki is before minor change.