8/13/2019 AnyMedia LPA832 ADSL-POTS Combination Application Pack Brochure[1]

1/2

AnyMedia Access SystemLPA832 ADSL/POTS Combination Application Pack

This 32-port application pack supports both POTS and ADSL functions on every port. As a

result, it doubles the POTS/ADSL capacity of any new or existing product in the AnyMedia

Access System portfolio, while eliminating the need for external POTS splitters. With this

application pack, you gain a highly cost-effective way to deliver a diverse selection of voice,

data and video services from a single system without increasing your space requirements. It

enables you to meet customers growing demand for broadband services and decrease

churn, while you maintain support for narrowband traffic.

Applications Business-class data services, such

as fast Internet and intranet access,

VPNs, Webcasting and video

conferencing

Residential data services,

including high-speed Internetaccess, streaming video and

online multi-player gaming

Leading-edge video services

like streaming multimedia,

broadcast TV, pay-per-view and

video-on-demand All types of voice services, ranging

from POTS to voice-over-broadband

Features Thirty-two subscriber ports

Supports the ADSL and POTS

services you choose on all 32

portsADSL only, POTS only or

any mix of ADSL and POTS

Combined ADSL/POTS functionality

on a single line cardEssentiallydoubles the POTS and ADSL

capacity of any product in the

AnyMedia Access System

portfolioincreasing costeffectiveness

High-speed data transportOffers

both full-rate (G.dmt) and medium-bandwidth (G.lite) ADSL, with data

rates up to 8 Mbps downstream and

1 Mbps upstream (G.dmt)

Integrated POTS splitters

Minimizes capital expenses and

speeds deployment

Integrated Line TestingProvides

metallic test access path forstreamlined service provisioning

and fault isolation

Robust feature supportMaintains

both broadband and narrowband

functions, including Custom Local

Area Signaling Services (CLASS)

Plug-and-play installation

Streamlines service start up

ADSL performance monitoring

Gives you the information requiredfor dependable service, including

fault reporting and diagnostics

Software downloadSimplifies

upgrades and minimizes costs

Benefits Reduced customer churnGain the

flexibility to add new services

quickly and easily, helping youmeet subscriber demand and stayahead of the competition

Decreased costsServe twice asmany subscribers in the same

spaceand eliminate the need for

external POTS splitters

Economical growthAdd capacity

to your existing AnyMedia Access

System network by using theLPA832 to free up ports for

additional subscribers

Simplified networksSupport a

mix of voice and data services with

a single application pack, instead

of complex dedicated systems

Reliable performanceATM QoS

ensures the highest quality for voicecalls, as well as the performance

you need for premium data

services, backed by SLAs

Increased revenue opportunities

Offer a wide range of high-value

broadband services, while youmaintain support for narrowband

traffic

Enhanced marketing methods

Take advantage of combined

POTS/ADSL support to create

new upselling techniques, suchas 7-day service trials

Investment protectionUse your

existing infrastructure to delivervoice, data and video services to

twice as many subscribers

8/13/2019 AnyMedia LPA832 ADSL-POTS Combination Application Pack Brochure[1]

2/2

1.Operating requirements

Ambient temperature: 40 F to +167 F (40 C to +75 C)

Transportation/storage: Conforms to GR-63 (ES 300 019-1-1)

2.Relative humidity

Operating: 5%95% (non-condensing)

Transportation/storage: Conforms to GR-63 (ES 300 019-1-1)

3.Operating altitude

Up to 13,123 feet (4000 meters)

4.ATM capabilities

ATM cell transport

ATM backplane bus interface

5.QoS

UBR, CBR, nrt-VBR, rt-VBR

6.ADSL metallic interfaces

ANSI T1.413 Issue 2 (1998)

ITU-T G.992.1 (Full rate)

ITU-T G.992.2 (G.lite)

7.ADSL Network Timing Reference support

ITU-T G.992 Section 7.3

8.POTS metallic interfaces

Two-wire loop-start current feed

Subscriber loop interfaces supports all CLASS features,on-hook transmission, automatic loss compensation,TR-008 and GR-303 signaling, V5.x signaling

9.Provisionable transmission and signalling

PCM Encoding A-law/U-law

Reverse battery metering

1800 Ohm at -48V battery and 18 mA

Technical Specifications

ADSL/POTS combination application packs are intended for use in the AnyMedia shelf located in controlled

environments (indoors) or in electronic equipment cabinets in uncontrolled environments (outdoors).

The AnyMedia Access System conforms to the specifications of Telcordia Technologies GR-63 (ETS 300 019-1-3)

NEBS Generic Equipment Requirements and GR-487 (ETS 300 019-1-4) Electronic Equipment Cabinets

General Requirements. When properly equipped, the cabinets are designed to maintain internal environmental

conditions within appropriate operational limits for AnyMedia Access System equipment such that system

performance conforms to TR-NWT-000057. The AnyMedia Access System also conforms to the ETSIspecifications ETS 300019-1-1/class 1.2 (storage), ETS 300019-1-2/class 2.3 (transport) and ETS

300019-1-3/class 3.1E (operation).

10.Subscriber port wiring

Readily accessible via faceplate connector

11.Splitters

On-board the LPA832

12.Port density

32 POTS/ADSL combined

13.LED indicators

Fault Red: Lit when a fault is detected; flashes during self-test

Busy Green: Lit when at least one line is off-hook

14.Performance

Rate adaptive and rate provisionable

Full-rate DMT-ADSL (ITU-T G992.1, ANSI T1.413 Issue 2)

G.lite ADSL (ITU-T G.992.2)

15.System integration

Control and operations communication with AnyMedia ATMFeeder Multiplexer (AFM) and Common Data and Control(COMDAC), serving as the controller cards for the AnyMedia

broadband and narrowband sub-systems respectively

To learn more, contact your dedicated Lucent Technologies

representative, authorized reseller, or sales agent. You can also

visit our Web site at www.lucent.com.

AnyMedia is a registered trademark of Lucent Technologies Inc.

All other trademarks, registered trademarks, service names,

products, or brand names are the sole property of their

respective owners.

This document is provided for planning purposes only and does

not create, modify or supplement any warranties relating to the

products and services described herein.

Copyright 2003

Lucent Technologies Inc.

All rights reserved

INS v1 11/03