www.renmar.co.uk0844 6933225

ANCILLARYSPECIALISTS

www.renmar.co.uk

MATERIAL HANDLING EQUIPMENTWorking with SB Plastics Machinery and Engin Plast, Renmar provide a range of material handlingequipment enabling us to offer the very best solutions, including blenders, dosers and loaders.

COLOUR DOSERSThe Colour range of volumetric dosing units from SB Plastics Machineryhave a throughput range of 0.08 to 125kg/hr

• Brushless motor

• Stainless steel components

• Compact dimensions

• Complete discharge hopper

• Static mixer

• Automatic or manual controller

• Maintenance programme

FSB LOADERSThe FSB loader is our economical single phase loader with a 950wmotor, complete with built-in filter cleaning facility. Stainless steel construction body with easy to use controls. The FSB units can be usedin conjunction with a proportional valve for introducing virgin and regrind.

FTB LOADERSThe FTB is our competitive three phase hopper loaders with a rangeof vacuum pump sizes. They can also be used in conjunction witha proportional valve.

Full details on our material handling and storagerange can be found on our website www.renmar.co.uk

T: 0844 693 3225T: 0844 693 3225

MATERIAL DRYING EQUIPMENTAs the UK distributor for SB Plastics Machinery we supply a full range of dehumidifying and hot airdryers.

DB/N DEHUMIDIFYING AIR DRYERSThe range of plastic material dehumidifying air dryers starts with theDB/N104 which has air-flow of 40m3/h through to the largest dryerDB/N720 with an air-flow of 2000m3/h.

The SB Plastics Machinery accompanying HB/N hoppers range from30 litres right up to models with hopper sizes of 5000 litres.

• Automatic programming with daily /week timer

• Electronic microprocessor with PID control

• High pressure suction blowers with high filter surface

• Wide range of drying hoppers in stainless steel with ceramic fiberinsulation

• Safety protections such as:- compressed air failure- over temperature, change-over valve position etc.

• High pressure blowers

• Compact design

• Dew point - 40ºC

EDB HOT AIR DRYERSThe SB Plastics Machinery range of plastic material EDB hot air dryers hasbeen developed for the drying of all non-hygroscopic plastic material.

The EDB hot air dryers are ideal when installed directlyon the barrel of the machine or extruder, they can also beinstalled at the most convenient side of the machine.

• Stable hopper air flow

• Electronic process temperature control with digital display

• Alarm with digital display

• Process thermoregulatory with alarm

www.renmar.co.uk

PRODUCT HANDLINGEQUIPMENTMarket-leading Virginio Nastri belt conveyorsystems and product handling equipment

• INCLINE BELT CONVEYORS

• SWAN NECK BELT CONVEYORS

• FLAT BED BELT CONVEYORS

• CUSTOM-BUILT BELTCONVEYORS

• BELT & ROLLER TRACKCENTRALISED CONVEYORSYSTEMS

• BOX CAROUSELS

• MANUAL AND AUTOMATICSPRUE SEPARATORS

• TUNNEL AND UNDERBELTMETAL DETECTORS AVAILABLEAS OPTIONAL EXTRAS

• FULL SPARE PARTS - BELTS,MOTORS, GEAR BOXES ETC

Full details and specifications can be found on our website,including centralised conveyors systems and multi-level lift conveyors.

T: 0844 693 3225

TEMPERATURE CONTROLAs the UK distributor for MARSE we offer a wide range of temperature control equipment includingmould heaters and oil heaters.

MOULD HEATERS• PID temperature control in heating and cooling process• Pump works under pressure and reverse sense• Hose break and leakage monitor• Sensor failure monitor• Tank and heaters made of stainless steel• Indirect cooling system• Water level sensor throught electrode• Automatic water feeding• Security thermostat• Acoustic alarm

Options:• Double outlets kit• Flow rate control• 60 lit/min 5.8 bar pump• External sensor• Return of process temperature indication• Serial Interface TTY 20mA, RS85,• Analogue signals input / output 4-20mA, 0-10 volt signals

For more information on mould heaters and chillers visit the website.

www.renmar.co.uk

MATERIAL MIXERS• Vertical batch mixers

• Capacity 200 - 17000 Kgs

• Force feeder option

• Load cell option

• Painted mild steel or stainless steel

MATERIAL BINS• Material storage bins

• Capacity 80 - 400 litres

• Stainless steel

• Castor mounted

• Suction probe outlet

BIG BAG FRAMES• Big bag storage frame

• Single or Double

• Auto change over

• Load cell option

• Adjustable height

• Bag unloading systems available

MATERIAL HANDLING SOLUTIONS

T: 0844 693 3225

PLASTICS MACHINERY

STATIC CONTROLSOLUTIONS

What Is Static Discharging?

Many industrial processes create static charges, whichcan often be disruptive to the processor even create discomfort to theoperators

Static discharging involvesreducing these chargesto level where they donot affect the processor the operators,improving qualityand efficiency

High quality andreliable equipment

Optimised equipmentfor best performance

Realistic quotes

Prices to suit all budgets

Many years’ experience

What Is Static Charging?

Many industrial processes can be improved bytemporarily sticking materials together and staticcharging is an economical means to accomplishthis in a highly controlled manner. Examplesinclude reducing necking in filmcasting, holding printed ribbonsin register through a folderand improving inktransfer in gravureprinting Renmar Plastics Machinery

Unit 2 Sanders CloseFinedon Road Industrial Estate

WellingboroughNorthamptonshire. NN8 4HQ

Tel 0844 6933225Email sales@renmarstatic.co.uk

Web www.renmarstatic.co.ukWeb www.renmar.co.uk

Working in partnership with Eltex,a well-established German developerand manufacturer of static controlequipment, Renmar Plastics Machinery(formally Arrowquint) can provide youwith a solution to your static control issues.

STATIC CONTROLSOLUTIONS

Unit 2 Sanders Close • Finedon Road Ind EstateWellingborough • Northamptonshire • NN8 4HQ

Tel: 0844 6933225 • Email: info@renmar.co.uk • Web: www.renmar.co.uk

PLASTICS MACHINERY

Working with carefully selected manufacturers with quality products, Renmar PlasticsMachinery has an impressive range of ancillary equipment and machinery for many differentindustries such as plastics, print, packaging, medical, automotive and food.

As we are family-run our customers are at the heart of the business and more than justanother number.

Proud suppliers of ancillary equipment to -

Big enough to deliver,small enough to care…

®

Scorpion Mouldings

RAS0921