Embed Size (px)
Citation preview
amiibo diorama
How to assemble?Kids, ask a grown-up for help.
1. Carefully cut out the background and base piece included on the second page.
2. Carefully cut along the green and red lines to create the slots.
3. Choose your two matching characters and carefully cut them out.
4. Create a loop out of the base piece and secure it by notching the two green slots together.
5. Next, add the background piece to the base by sliding the red slots together.
6. Loop a piece of tape or add some glue to the back of your chosen characters and place them on the background.
7. Place your amiibo™ figure in the middle and enjoy!
Top down view.
Background piece
Characters
Base piece
© 2015-2016 Nintendo Developed by ALPHADREAM. Nintendo properties are trademarks of Nintendo.
Background piece
Base piece
