P.O. Box 00000 Abu Dhabi, UAE - Tel.: +971 2 000 0000 - Fax: +971 2 000 0000e-mail: info@adsbs.ae www.adsbs.ae

CONSTRUCTING

STRENGTH

INTRODUCTION

ADSBS uses revolutionary manufacturing process and advanced software to design steel framing solutions that give �exibility of design & speed of assembly that outperform traditional construction methods.

After being briefed, ADSBS engineers, project managers and service in a traditional hands-on manner to a high level of customer satisfaction. However, equipped with industry leading software and technologically advanced steel rolling machines, the solutions provided are revolutionary. So too is the dramatic increase in construction speed when compared to traditional methods.

ADSBS uses steel roll-forming machinery that converts thin galvanized steel in to cold-rolled steel frame components ready for assembly.

The precision, speed and accuracy of the Abu Dhabi Steel Building Systems exceed industry norms. Typical construction details can be adjusted minutes before manufacture.

INTRODUCTION

ADSBS is a leader in steel construction, design, manufacturing and site installation. ADSBS operates in many construction sectors including residential, commercial, and leisure. Using light steel framing Abu Dhabi Steel Building Systems (ADSBS) out performs traditional methods of construction.

AN EVOLUTION IN BUILDING SYSTEM

Architect creates a plan.Architect’s drawing are converted using a framecad software.

Framecad �les are then converted into light steel sections.

ADSBS produces all of the components for self-jigging from their machinery.

Steel sections and compo-nents are assembled at ADSBS factory.

ADSBS steel panels installed on site.

• Rapid construction system.• Construction periods reduced by up to 30%.• ‘Dry” construction technology.• Precaset concrete and light steel framing provide a rapid dry envelop.• Tolerances can be accommodated by ‘Stud and Track’ system.• Pre-fabricated lift over-runs.

• Minimal on-site wastages.• Increased site productivity.• Predictability of process.• Safer construction process.• Increased quality.• Good energy efficiency.

ADVANTAGES OF ADSBS+ABU DHABI STEEL BUILDING SYSTEM EXPLAINED.

65

Build times are typically 50%-60% less than traditional on-site construction. Leading to saving priminaries and an earlier return on investment.

Repetition of prefabricated units leads to the considerable economy of scale in production.

Shorter Build Time.

Economy of Sale.

Manufactured light steel construction is about 30% of the weight of conventional masonry construction.

E�cient factory production techniques are much less wasteful, and installation is less disruptive on site.

Lightweight Construction.

Reduced Environmental Disruption on site.

ADVANTAGES OF ADSBS CONSTRUCTION SYSTEM+BENEFITS OF ADSBS LIGHT STEEL FRAMING SYSTEM

87

The erection and �nishing teams who install complete modular buildings, involves less workers on site than traditional buildings.

Superior quality is achieved by factory based control and pre design of similar modules.

Reduced site Labour.

Superior Quality.

Early enclosure of buildings enables early start of internal �t out, particularly important in areas of high service contents such as hospitals.

ADSBS’s meet, and often exceed, current and proposed building regulations

Rapid dry envelope of early enclosure.

Meeting and exceeding building regulations.

ADVANTAGES OF ADSBS CONSTRUCTION SYSTEM+BENEFITS OF ADSBS LIGHT STEEL FRAMING SYSTEM

109

RESIDENTIAL CONSTRUCTIONS

ADSBS building system has been extremely well received by the construction industry where rapid steel building construction methods meet their demands of high level of acoustic Performance and speed of construction and quality. Multi-story residential building all so bene�t from using in�ll walls and long span �ooring where excellent thermal and acoustic levels can be achieved.

RESIDENTIAL

• Speed of construction and reduced time on site.• Many cladding options improved acoustic and thermal performance.• Good sustainability.• Habitable roof space.• Approved by all official departments and associates.

+ ADVANTAGES OF LIGHT FRAMING IN RESIDENTIAL BUILDINGS

1211

Two �oor residential facility withplain paint �nishing.

One floor residential facility withdecorative cladding

COMMERCIAL CONSTRUCTIONS

ADSBS has an excellent portfolio in commercial buildings .ADSBS works includes complete design solutions and a variety of applications including renovation, in�ll walls, over-roo�ng, o�ce planning and curved structures. ADSBS designers can o�er design led solutions to speci�c projects brief. ADSBS is well suited for design requiring detailing such as curved structures. Our frame card software can easily produce alternative design options.

COMMERCIAL

• Demountable walls and versatile office planning.• Rapid dry envelop additional floors.• Speed of construction.• Many cladding options.• Reduced time on site.• Building conversion.

+ ADVANTAGES OF LIGHT FRAMING IN COMMERCIAL BUILDINGS

Showroom, Dubai Storage Facility and Horse Stable, Al Ain

ADSBS fast track system met the demands of complex refresh-ment project in Birmingham city centre. ADSBS frames were designed and installed in complex existing openings and used to create a new public house and commercial facilities. Site surveys enabled accurate bespoke frames to be installed, thus insuring the contractor to met the dead line. Improvement large fashion retail store in stock-on-Trent allowed the versatility of ADSBS system to be fully explored. The curved facade (below) was achieved by using light frames, formed in curved panels and supported with light steel flat plate.

1413

ACCOMMODATION

The labour residential sector is expanding rapidly as labour numbers and expec-tation of the quality increase.

Any labour accommodation project is a design and build scheme. The primary structure of the building can be a novel ‘hybrid’ of precast concrete structures cross-walls and �oors, and ADSBS light steel façade walls and parapets or a fully ADSBS light steel components. It is essentially a ‘dry’ construction technology, which optimizes the speed of construction, and early start for follow-on trades, and represents the second major collaboration, and early start for follow-on trades, and represents the second major collaboration between precast concrete and ADSBS.

Full cities with its complete facilities were designs and implemented various technologies for wall claddings and roof trusses providing many spans and spaces. Either with complete ADSBS light steel buildings or in-�ll technology to assure rapid erection and pro�tability. Most of ADSBS projects are turn key projects including all requirement as well as any civil designs, execution and implementation.

EMPLOYEE & LABOUR ACCOMMODATION

The NBB Workers’ City is a housing accommodation for laborers available fore leasing to both the private and government sectors. It is located 60 kilometer west of Abu Dhabi City, of an area of 122,500 square meters, and constructed to accommodate nearly 30,000 people.

NBB WORKERS’ CITY

1615

Labour Accommodation O�ces and VIP Facilities

VARIOUS PROJECTS

1 - Labour City in Al Raha Beach, Abu Dhabi2 - Dining Facility3 - Mosque4 - Other Facilities5 - Storage Facilities6 - Storage Facilities

1 2 3

4 5 6

Labour City inAl Raha Beach

Abu Dhabi

Perspective View Floor Plan

18

VARIOUS PROJECTSIN-PROGRESS

1 - Swimming pool facility, Al Ain 2 - Multi-purpose O�ces 3 - Employees’ Accommodation 4 - Horse track Stadium 5 - Horse track Stadium 6 - Horse track Stadium 7 - Management O�ces, Al Ain 8 - Multi-purpose O�ces

9 - VIP O�ces 10 - Finest Interior Design 11 - Finest Interior Design 12 - Interior decoration2019

VARIOUS PROJECTSIN-PROGRESS

1 - Management O�ces, Al Ain 2 - VIP O�ces, Al Ain 3 - Decorative External Finishes 4 - Management O�ces 5 - Floor Finishes 6 - Toilets 7 - Horse Stables 8 - Service Facility

9 - Storage Facility 10 - Kitchen Units 11 - Cold Storeroom 12 - Swimming pool Service Facility, Al Ain2221

QUALITY ASSURANCE

24

From Designing Stages

TO EQUIVALENT RESULTS, the quality of our work will exceed the client’s expectations.

DES

IGN

ING

STA

GE

RESU

LT