16
WELCOME

Abrasive Wheel

  • Upload
    vfq3481

  • View
    95

  • Download
    1

Embed Size (px)

DESCRIPTION

HSE - Abrasive Wheel

Citation preview

Page 1: Abrasive Wheel

WELCOME

Page 2: Abrasive Wheel

Agenda

• Checks

• Precautions

• Abrasive wheel setup

• Eye and face protection

• Storage and Inspection

• Using grinder

• Completion of the job

Page 3: Abrasive Wheel

• Check wheel spins freely

• Check for cracks

• Check for chips in wheel

• Check for alignment

Page 4: Abrasive Wheel

Check the rest is close to the wheel but does not touch

Page 5: Abrasive Wheel

Check the guard is in place and safe to use

Page 6: Abrasive Wheel

Check Personal Protective Clothing and Equipment

Page 7: Abrasive Wheel

Check switch works correctly

Page 8: Abrasive Wheel

grinders should be permanently mounted or secured.

The maximum RPM rating of each abrasive wheel must be compatible with the RPM rating of the grinder motor.

Each electrically operated grinder should be effectively grounded.

Each grinder should have an individual "On" and "Off" control switch.

Page 9: Abrasive Wheel

The side of a wheel should not be used for grinding, unless it is a special type of wheel designed for that purpose.

Defective abrasive wheels (cracked, broken, out of balance) should not be used.

Abrasive wheels that have been discarded should not be re-used.

Page 10: Abrasive Wheel

• Grinding wheels should be equipped with a work rest, also referred to as a tool rest, that holds the work firmly.

• The work rest must be kept adjusted close to the wheel with a maximum opening of 1/8” to prevent the work from being jammed between the wheel and the rest.

Page 11: Abrasive Wheel

Grinding wheels must also have an adjustable tongue guard.

The tongue guard must be adjusted to within 1/4" of the wheel.

Page 12: Abrasive Wheel

Eye injuries at grinders have demonstrated that safety glasses alone are insufficient protection.

ALWAYS wear a face shield when using a grinder.

Ensure PPE is of the correct sort and worn correctly

Page 13: Abrasive Wheel

Abrasive wheels must not be stored where they would be exposed to high temperature or humidity, water or other liquids or where they would be subjected to physical damage from falling tools or materials.

Before new abrasive wheels are used they should be visually inspected and ring tested.

Page 14: Abrasive Wheel

Use the front of

the wheel only

Do not use the side

of the grinding wheel

Page 15: Abrasive Wheel

Do not use the wheel for grinding wood only metals

Page 16: Abrasive Wheel

Switch off

Stow safety equipment