About KVAL Machinery

About KVAL Machinery KVAL was started in the mid 1940’s by AA Kvalheim. A Norwegian trained furniture maker, who turned to cabinetmaking and carpentry, and eventually machinery manufacturing after immigrating to the United States. One prod-uct produced in the mid 40’s was a panel saw which helped expand the fledgling flush door industry that was developing around the Walled Lake, Michigan area. Early door sizing systems were supplied to companies like Young Door, Walled Lake, Arrow Door, and out on the west coast to Cal Wood Door. In the mid 1950’s, sons Andy and Irv Kvalheim joined in the business. As the company grew, so did the line of products. Door pre-hanging equipment was designed for distributors and high production equipment was designed for manufacturers producing pre-fit units. During the growth years of the 60’s, the company continued as an innovator in the industry with automatic machines for jamb processing, casing trimmers and updated door siz-ers. As the 70’s began, customers began demanding even more automa-tion to cut labor costs and improve product quality. Kval responded with bi-fold door assembly and pre-hanging machines featuring fully automatic screw driving systems. Today, Jerry, David, and Mark Kvalheim…the three grandsons of AA Kval-heim have joined the firm. The company family has also grown to include George Kameoka as head engineer, and Mark Smith as one of the manag-ing partners. KVAL products have continued to evolve and are now faster than ever, but are easier to set up, and produce higher quality doors than ever be-fore. Recent technical innovations include CNC controls and the complete replacement of air logic control systems with solid state programmable con-trollers. Fully automatic positioning and sequencing for door and jamb equipment. Digital readouts with touchscreen controls to guarantee accu-rate setup and operation. When looking for quality door, jamb, casing, and related machines, look to the leader in the industry for over six decades! Look to KVAL!!!

© KVAL Inc. All rights reserved

This document may not be copied, photocopied, reproduced, transmitted, or translated in any form or for any purpose without the express written consent of KVAL Inc.

KVAL Inc. reserved the rights, without notice, to change design and construction of any products.

Price are subject to change without notice. Errors in description, photography, or typographical errors are subject to correction.

Printed in the United States of America

Published on 2/8/2011

Making Quality Door and Jamb Machinery Since 1947

INNOVATION | QUALITY | HONESTY Order Today!

Call 1.800.553.5825

3 Track Your Order Online at STORE.KVALINC.COM

To see our full line of products,

go to kvalinc.com and type in DL-2 Find

DL

-2

DL-2

KVAL's DL-2 Door Light Cut-Out Machine produces rectangular, curved, and multi-light cut-outs in wood or metal doors up to 16 gauge. Face boring is standard with a built-in steel template adjustable for backsets from 2-3/8” to 2-3/4”. The three-speed cutter head is supported by cross- mounted lineal bearing shafts for length and width travel. This design eliminates cut-out templates for rectangular lights since adjustable stops can be locked directly on the shaft to limit cutter head travel. A numeric scale and ratcheting lock handles are provided to make the stops easy to adjust. For curved or multiple light cutouts, plywood templates slide into a holder 1/4" above the door. The same template can be used for 32” or 36” doors. In operation, a door is rolled into the machine from the end until it indexes against a retractable doorstop. The clamp but-ton brings in the adjustable fence to firmly sandwich the door against a fixed rail. With the touch of another button, the cutter head is lowered. The operator begins to manually move the cutter head carriage along the lineal bearing shafts to make the cut. During the cutting operation, the spindle automatically oscillates up and down 3/8” every second to guard against overheating the same part of the cutting tool, thus ensure even tool wear and longer tool life. The pass line height of the DL-2 stands at 33-1/2”. SPECIFICATIONS: Footprint Size: 7'x 10' Crated Dimensions: 115"L x 84"W x 60"H Shipping Weight: 2,000 lbs.

4 KVALINC.COM More Products Online



Call 1.800.553.5825

DL

-2

Replacement Parts

Chipout,DL-2,Door Cutoff Opt-B KVAL P/N: 37-0B-AAA

Router Bit Carbide Tipped 1/2" Dia. 1/4" Shank 2-1/8" OAL 1/2" CE KVAL P/N: RB080433

Router Bit Carbide Tipped 1/2" Dia. X 1/2" Shank 5" OAL 2-1/4" Carbide Tipped KVAL P/N: RB080880

Router Bit Carbide Tipped 1/2" Dia. 1/2" Shank 5-1/2" OAL 2-1/2" CE KVAL P/N: RB080888

Router Bit Carbide Tipped 1/2" Dia. Stagger Cut 1/2" Shank 5" OAL 2-5/8" CE KVAL P/N: RBST0888D

Router Bit Carbide Tipped 1/2" Dia. Stagger Cut 1/2" Shank 5-1/2" OAL With 2-5/8 Car-bide Length KVAL P/N: RBST0888F-SE1

Twist Drill, 15/16 Dia., 7/16 Thread Screw On, 4" Twist, Brad Point, Carbide Tipped KVAL P/N: TD1564-BPCT7

Twist Drill, 1" Dia., 7/16" Screw On, 4" Twist, Brad Point, Carbide Tipped. KVAL P/N: TD1664-BPCT7

Router Bit, Onsrud 15-53, 1/2" Dia. X 3" Cut Edge Gold-Tin Coating 5-1/2" OAL, Door Lite Bits KVAL P/N: ONS1553G

B3 Collet, 1/2" Round, 7/16-20 Thread, Hardinge KVAL P/N: HARB3

Router Bit, Onsrud 26721, 1/2” Dia., 3 Cutting Edge Hollow Metal, 5-1/2" OAL Tin Coated Special Hollow Metal Bit. KVAL P/N: ONS26721G

Router Bit CT 1/2" Dia. 1/2" Shank 5-1/2". 2-1/2" Cutting Edge, Solid Carbide Two Flute Compres-sion Spiral. Door light Cutout Bit. KVAL P/N: RB-8311

Collet, 1/2" FRL90, 7.5-HP Perske Motor. KVAL P/N: PERFRL90B

Router Bit,1/2" Dia., 1/2" Shank,5-1/2" OAL,3" CL Compression KVAL P/N: RB0808550-K

Collet, 1/2" 3/8-24 NF Thread Used with DL2-28CQ Draw Bar KVAL P/N: HARB4

Cover Nut, FRL 90 M48 X 2 RH, 7.5 HP Per-ske Motor. KVAL P/N: PERFRL90N

DL-2, Frame, Template Pin Kit, Includes 1/4-20 X 3/4 FH with (Nut C250 "T" Nut) and Template Pin KVAL P/N: 37-00-UPK5

Cylinder, Advance, Style #3, 300 X 1 KVAL P/N: ADV300A37

Spare

Spare

Spare

Spare

Spare

Spare




DL

-2

Spare Parts

Sprocket,40G16 Taper Bore Use G Split Bush-ing,#40 Chain,16 Tooth Sprocket KVAL P/N: BRO40G16

Directional Control Valve, Fabco 18 Series, PMD-4,1/8" NPT, 4-WAY, Detented (Push-Pull), Panel Mount Button KVAL P/N: FAB18PMD4

Valve, Fabco, 3-Way Single 18 PMS-3 1/8. KVAL P/N: FAB18PMS3

Valve, Fabco, 1800 PMS-4 1/8, 4 Way Single 18 Series Palm Button Actuated KVAL P/N: FAB18PMS4

Hairline Pointer, Plastic KVAL P/N: HLPOINTR1

Cylinder, Fabco Pancake C-221-X 3/4 Stroke, 1-5/8 Bore KVAL P/N: FABC221X

Cylinder, Stroke Pancake G-221-X 3 Cylinder, Bore Fabco 1-5/8 KVAL P/N: FABG221X

Cylinder, Fabco Pancake, Hardware, RC-38, Rod Clevis For 221 Series KVAL P/N: FABRC38

Cylinder, Stroke Pancake X-121-X 3/4 1-1/8 Bore Fabco. KVAL P/N: FABX121X

Cylinder, Fabco, Hardware, 221-1D, Pivot Mount For 221 Series KVAL P/N: FAB2211D

Bearing, Pillow Block, PB 250 X 1, Setscrew Locking Relube. KVAL P/N: HUBPB2503

Safety Exhaust Ball Valves, 1/2" NPT KVAL P/N: BBVALVE08

Cylinder, Bimba 123D 3" Double Acting Front Nose Mount 1-1/4 Bore. KVAL P/N: BIM123D

Cylinder, Bimba, Hardware, 120,170 Foot Bracket .75 Bore 2.50 Long Slotted Base KVAL P/N: BIMD241

Cylinder, Bimba Hydraulic H176DUZ 6" Stroke with Poly Pack Seals Double Acting 1-1/2" Bore KVAL P/N: BIMH78129-A-6

Shuttle Valve, 1/8", SV10B, NPT KVAL P/N: DELSV10B

Coupler, 1" Dia. Bore Sleeve 3" Long with Keyseat, CS 16 K KVAL P/N: BROCS16K

Air Piloted Valve, Humphrey 125A-3-11-20 Normally Open, 1/8" (3.2mm) Orifice, 3-Way Pilot KVAL P/N: HUM125A02




Call 1.800.553.5825

DL

-2

Replacement Parts | Main Frame

Air Piloted Valve, Humphrey 250A-3-10-20, Normally Closed 1/4" (6.4mm), 3-Way Pilot KVAL P/N: HUM250A01

Valve, Humphrey, Operator Fingertip, 1/4 Min 3/8 Max Movement KVAL P/N: HUM34T

Valve, Humphrey, 3P Spring Return Normally Closed. KVAL P/N: HUM3P

Valve, Humphrey, 4-Way Normally Closed/ Normally Open 5-Port, Spring Return. KVAL P/N: HUM41P

Valve, Humphrey, 4-Way Toggle 3-Position, Detented Valve. KVAL P/N: HUM41TD3

Valve, Humphrey, TAC Valve, Hardware, 8-600 Angle Bracket Single KVAL P/N: HUM8600

Valve, Humphrey, Fitting, 10-32" Barbed to 1/4" ID Hose KVAL P/N: HUMBF1

Valve, Humphrey, Fitting, Elbow 10-32 1 Male - 2 Female KVAL P/N: HUMUEF

Bearing, 1-1/2" Open Super Linear Pillow Block,KGXO-24PP KVAL P/N: INASPB240

Template Spring Plunger Fully Retractable L Shaped 1/4-20 Thread (FR-250P) KVAL P/N: MC3403A71

Handle, Kip 1/2-13 Thread, 1.77 Long, Adjust-able KVAL P/N: KIP38455

Chain, Connecting link, 40 Chain KVAL P/N: LIN400001

Chain, Offset Link, 40 Chain KVAL P/N: LIN400002

Wheel, 3" Dia. X 1-1/4" Wide 3/8" ID Wheel With Simi Precision Roller Bearing KVAL P/N: INDXS0303106

Pad, Delrin 1-1/2" Dia. X 1/2" 7/16 NF Thread KVAL P/N: P240807FD

Pad, Delrin 1-1/2" Dia. X 5/8", 7/16 NF Thread KVAL P/N: P241007FD

DL-2, Frame, Template Pin Kit, Includes 1/4-20 X 3/4 FH with (Nut C250 "T" Nut) and Template Pin KVAL P/N: P633006-N

Regulator, 1/2" Ports with built in 150 PSI Gauge KVAL P/N: REGG08

Spare




DL

-2

Spare Parts

Filter, 1/2" With Auto Drain KVAL P/N: SMC40004F

Valve, SMC 4-Way Double Pilot Without Base, NVSA4214-00O KVAL P/N: SMCNVSA04

Tape 12' Stick-Down 1/2 Wide Reads L-R KVAL P/N: TAPE12RI

Tape 12' Stick-Down 1/2 Wide Reads R-L KVAL P/N: TAPE12LI

Air Motor, 4Z231, 56C Face Flange Mount KVAL P/N: DAY4Z231F

Knob, DK-6, Fluted, 2-3/8" Dia. Knob, 3/8-16 Threaded, 2" Long Stud KVAL P/N: REIDK06

Split Collar, One Piece, 1" Dia., Steel KVAL P/N: SC116F

Regulator, 1/4" Mini With Check Valve (1/8" Body with 1/4" Ports) KVAL P/N: SMC20001R

Regulator, Bracket, 1/4" Mini KVAL P/N: SMC20001Y

Pressure Gauge, SMC, K40, 1/8 NPT Thread, 160 PSI KVAL P/N: SMCK10

Speed Controller, Standard, 1/8" Right Angle, 1/8 NPT, Metal Body Elbow Style KVAL P/N: SMCAS2101




Call 1.800.553.5825

DL

-2

Replacement Parts | Head

DL-2, Draw Bar 7/16-20 Thread, 7/16 Dia. Shaft Complete Assy (Draw Bar With Hex Roll Pins and Washer). KVAL P/N: 37-00-28

DL-2,Modified Set Screw, 10-32 X 1/2", Old P/N: DL2-27A04, Used on short nose spindle KVAL P/N: 37-00-4A

DL-2,Modified Set Screw, 10-32 X 3/8", Old P/N: DL2-27A04, Used on short nose spindle KVAL P/N: 37-00-4B

DL-2, Head, Arbor Shaft, 1144 Stress proof, 1 1/2" Dia. X 17 3/16. KVAL P/N: 37-00-CM

DL-2, Head, Arbor Shaft With Extended Nose, 1144 Stress proof, 1 1/2" Dia. X 17 3/16 KVAL P/N: 37-00-CM1

DL-2, Head, Arbor Template Follower KVAL P/N: 37-00-CO

DL-2, Head, 3-Groove Arbor Pulley, 4.1 Dia. X 2 3/16” KVAL P/N: 37-00-DX1

DL-2, Head, 3-Groove Motor Pulley, 5 Dia. X 2 3/16”. KVAL P/N: 37-00-DY1

DL-2,Arbor Rebuild Kit, Arbor Shaft With Extended Nose KVAL P/N: 37-00-UPK40

Cylinder, Bimba, Hardware, 500 Series, Mounting Nut 1-3/8-12 NF KVAL P/N: BIMD2540

Handle Bar Grips, Black, 5" Long KVAL P/N: BIKEGRIPS

Cylinder, Bimba 501D 1" Double Acting Front Nose Mount 2-1/2 Bore KVAL P/N: BIM501D

Cylinder, Bimba Hydraulic H314DBZ 4" Dou-ble Acting Front Block Mount, 2" Bore KVAL P/N: BIMH314DB

Motor, 3-HP, 3450 RPM, 145T Frame, 208/230-460V, 60 Hz KVAL P/N: BAL35A001T886H2

V-Belt 41.73 Long 7/16 Wide Rib Top Poly-flex KVAL P/N: BLT11M1060

V-Belt,31.50 Long,7/16 Wide Ribbed Top Polyflex, Tool Drive Motor Belt KVAL P/N: BLT11M800

DL-2, Belt Tension Screw With Knob & Pad, 3/8-16NC X 12 Lg KVAL P/N: DL2003BO1

Arbor Pulley (Ver 1991) DL-2 Cutter Head Assy 20-24 Gauge Doors.(3.900/2.000 OD X 1ID) KVAL P/N: DL2-26DX

Spare

Spare

PRE 1991




DL

-2

Spare Parts

DL-2, Head, Arbor Assembly with SMC mist oiler modification Series 1995 Extended Nose ( Through Mounting Holes) KVAL P/N: DL2-ABORAM1A

Cylinder, Fabco, Stack Assembly, DL-2 Cutterhead Post 1996, (1) A721 5/16" Stroke & (1) 721-5 5" Stroke With Brass Guide & Flow Controls KVAL P/N: FAB-A007A

Cylinder, Fabco Pancake Modified A-721-X to 5/16 Stroke, 3 Bore. Use (2) TRC-1220. KVAL P/N: FABA721XM

Pulley, DL-2 Motor Cutter Head Assy KVAL P/N: DL2301.D26

DL-2, Draw Bar 3/8 Thread. 7/16 Dia. Shaft. 16-5/8” OAL KVAL P/N: DL2-28CQ

Hardened Washer 5/8”-ID X 1”-OD X 1/16” KVAL P/N: DL2-28CQW

DL-2, Head, Arbor Assembly with SMC mist oiler modification Series 1995 Extended Nose ( Taped Base) KVAL P/N: DL2-ABORAM1

Directional Control Valve, Fabco 18 Series, PMD-4,1/8" NPT, 4-WAY, Detented (Push-Pull), Panel Mount Button KVAL P/N: FAB18PMD4

Directional Control Valve, Fabco 18 Series, PMD-3, 1/8" NPT, 3-WAY, Detented (Push-Pull), Panel Mount Button KVAL P/N: FAB18PMD3

Pad, Delrin 1" Dia. X 1/2", 3/8" NC Thread, DL-2 Arbor Drive Belt Tensioner KVAL P/N: P160806CD

Shaft Collar, One Piece, 3/4" Dia., Steel KVAL P/N: SC012F

Regulator, 1/4" Mini With Check Valve (1/8" Body with 1/4" Ports) KVAL P/N: SMC20001R

Valve, Humphrey, 3-Way Normally Closed Toggle (DL-2). KVAL P/N: HUM31V

Bearing, 1-1/2" Open Super Linear Pillow Block, KGXO-24PP KVAL P/N: INASPB240

Fastener, N06 Locknut for 1.173 Shaft, 18 Int. Threads Per Inch. KVAL P/N: LOKNUT06

Fastener,W06 Lockwasher for N06 Bearing Locknut KVAL P/N: LOKWSHR06

Knob, DK-85, 4-Prong, 1/4-20, 1-1/4 Dia. 1 Long. KVAL P/N: REIDK85

Reservoir Hydraulic, Monnier, 2-1000 KVAL P/N: MON21000




Call 1.800.553.5825

DL

-2

Replacement Parts | Head



Pressure Gauge, SMC, K40, 1/8 NT Thread, 30 PSI, K40-MPO.2-N01MS KVAL P/N: SMCK20

Spring,1/4" OD X 3/16" ID X 5" Long,.032 Wire With looped ends

Spring,1/2" OD X 3/8" ID X 3" Long,.0475 Wire With Coiled Ends KVAL P/N: 160300C

DL-2, Main, Lock Bore Template Holder, CRS, 3/8 X 5 X 6-1/4 KVAL P/N: 37-00-EE

DL-2, Main, Lock Bore Template Insert, CRS, 3/8 X 4 X 3 15/16 KVAL P/N: 37-00-EF

Mfg, DL-2, Template, 1-5/8” Lockbore Insert Ring KVAL P/N: 37-00-EFA

Cylinder, Bimba 121 1" Single Acting Front Nose Mount 1-1/4 Bore. KVAL P/N: BIM121

Heavy-Duty 1/2" (13mm) Joist & Stud Drill, DEW124, Modified Right Angle KVAL P/N: DEW124M

Cylinder, Bimba, Hardware, 120,170 Foot Bracket .75 Bore 2.50 Long Slotted Base KVAL P/N: BIMD241

Mfg, DL-2, Template, 1-3/4” Lockbore Insert Ring KVAL P/N: DL2-12AW5

Cylinder, Fabco Pancake C-221-X 3/4 Stroke, 1-5/8 Bore KVAL P/N: PERER16-1/4"

Wheel, 3" Dia. X 1-1/4" Wide 3/8" ID Wheel With Simi Precision Roller Bearing KVAL P/N: INDXS0303106

Pad, Delrin 1-1/2" Dia. X 1/2" 7/16 NF Thread KVAL P/N: P240807FD

Replacement Parts | Movable Fence

Speed Controller, In-line, 1/8" KVAL P/N: SMCAS2001

Spare

Spare




DL

-2

Replacement Parts | Electrical

Relay, Finder, General Purpose Relay, 55.34.8.120.0050, 4PDT, 120 V AC Coil (50/60Hz), 7A, 14 Pin KVAL P/N: 55.34.8.1200050

Chicago Miniature 120V Neon Amber Indica-tor, 6010QM3 KVAL P/N: IDI-6010QM3

Pushbutton Contact Square D 1-NO Green, 9001KA2 KVAL P/N: KA2

END PLATE FOR GROUNDING TERMI-NAL BLOCK ENTRELEC. KVAL P/N: 01036221

Terminal Block, 6mm, 30A, Grey, Screw 30A/600V Max., Accepts 24-10 AWG Wire M4/6, Screw Terminal KVAL P/N: 011511607

GROUNDING TERMINAL BLOCK EN-TRELEC.GREENN/YELLOW, 24-10AWG, 6mm KVAL P/N: 016580901

TERMINAL END SECTION ENTRELEC KVAL P/N: 11836816

Carlo Contactor 18A

KVAL P/N: CGC-18A-120

Finder Relay Socket 94.04 KVAL P/N: 94.04

Pushbutton Illuminated, Maintained (Push/Pull), 2 Position, Green Button, 1 N.C. Con-tact, Type: K, Size: 30mm, 10A, Square D KVAL P/N: KR9P1GH14

Disconnect 6mm Shaft, 290mm long, OXP 6X290 KVAL P/N: OXP6X290

Pistol Handle, Red/ Black, Nema 1, 3R, 12 Accepts 6mm SQ Shaft, 65mm Handle Pad-lockable KVAL P/N: OHB65J6

Pushbutton Contact Square D 1-NC Red, 600VAC 10A 30MM KVAL P/N: KA3

Pushbutton Operator Momentary, Non-Illuminated, Type: K, Size: 30mm KVAL P/N: KR1U

Pushbutton Non-Illuminated, Momentary, Green Button, 1 N.O Contact, Type: K, Size: 30mm, 10A, 600V, Square D

Pushbutton Non-Illuminated, Momentary, Red Button,1 N.C. Contact, Type: K, Size: 30mm, 10A, 600V, Square D KVAL P/N: KR24RH6

Limit Switch Arm Adjustable Radius Up to 3-1/2 Radius 3/4" Wheel 1-3/10 Wide KVAL P/N: LSZ52E

Selector Switch Operator Maintained, 3 Posi-tion, Non-Illuminated, Type: K, Size: 30mm, Square D KVAL P/N: KS42




Call 1.800.553.5825

DL

-2

Replacement Parts | Electrical

Disconnect Switch, 80 Amp, 3 Poles, ABB, OT80F3,1SCA105798R1001 KVAL P/N: OT80F3

Disconnect, Neutral For OT63E3 KVAL P/N: OTPN63EP

DL-2, Face Plate Router Upgrade, Porter Cable Router Model 7310, 5.6 amps Single Phase, 30,000 RPM. Includes Motor, Modified Base and Mounting Plate. KVAL P/N: 37-00-UPK26

DL-2,Dust Collection Assembly, Includes Hood With (1) 5” Outlet. Unit includes Brushes, rear spacer, Modified Front Belt Guard & Longer Belt KVAL P/N: 37-00-UPK19

Label, Warning, Avoid Injury, Do Not Operate Machine Without All Guards in Place. KVAL P/N: LABELKVAL43L

Label, Danger This Machine ...Disconnect All Power ... KVAL P/N: LABELQS3198

Label, Danger, Read and Understand Instruc-tion Manual, Label For All KVAL Machines. KVAL P/N: LABELKVAL11

Label, ISO, Electrical Shock KVAL P/N: LABELKVAL48A

Power Pole For OT63E3 KVAL P/N: OTPS63EP

Label, Danger, Moving Parts Can Crush and Cut KVAL P/N: LABELKVAL25J

Label, Warning, Read and Understand Opera-tor's Manual Before Using This Machine. KVAL P/N: LABELKVAL45J

Label, Caution, Eye Protection Required KVAL P/N: LABELKVAL39J

Label, USA Flag KVAL P/N: LABELKVAL49

Upgrades

Safety Labels




DL

-2

Safety Labels

Cylinder, Stroke Pancake G-221-X 3 Cylinder, Bore Fabco 1-5/8” KVAL P/N: FABG221X

Linear Bearing Block, With Steel Linear Ball Bearing, 1" Dia., 2 Seals & Zirk Fitting Hole, 2-3/4" Long 2 Square. KVAL P/N: KVALBB16B

Label, Caution, Loud Noise Hazard, Ear Pro-tection Must Be Worn KVAL P/N: LABELKVAL42L

Label, Warning, If You Can Read This Sign a Guard Has Been Removed. Do Not Operate With Guard Remove KVAL P/N: LABELKVAL44L

Cylinder, Bimba 501D 1" Double Acting Front Nose Mount 2-1/2 Bore KVAL P/N: BIM501D

Valve, Fabco, 1800 PMS-4 1/8, 4 Way Single 18 Series Palm Button Actuated KVAL P/N: FAB18PMS4

Heavy-Duty 1/2" (13mm) Joist & Stud Drill, DEW124, Modified Right Angle KVAL P/N: DEW124M

Pump Wrench, 1-1/4 Thin Pattern, 1240 KVAL P/N: WRENCH020

Label, 10 Good Reasons ... Keep Clear of Ma-chine KVAL P/N: LABELQS3241

Label, Notice Shut Off Machine when Unat-tended " 3-1/2 X 5 Vinyl Decal KVAL P/N: LABELQS3028

Cylinder, Bimba, Hardware, 500 Series, Mounting Nut 1-3/8-12 NF KVAL P/N: BIMD2540

Twist Drill, 1" Dia., 7/16" Screw On, 4" Twist, Brad Point, Carbide Tipped. KVAL P/N: TD1664-BPCT7


Option-A | Thumb Operated Clamping System

Option-C | Heavy-Duty Edge Drill

Spare




Call 1.800.553.5825

DL

-2

Option-D | Edge Detailing for Wood Edge Doors

Cylinder, Advance, Style #3, 300 X 1

KVAL P/N: ADV300A37

Cylinder, Bimba Hydraulic H176DUZ 6" Stroke with Poly Pack Seals Double Acting 1-1/2" Bore KVAL P/N: BIMH78129-A-6

Valve, Humphrey, 3P Spring Return Normally Closed KVAL P/N: HUM3P

Router Bit Carbide Tipped 1/2" Dia. 1/4" Shank 2-1/8" OAL 1/2" CE KVAL P/N: RB080433

Clamp, Flat-Tip Bonded Neoprene Cap, EDP, 1/4-20 Thread 1-5/8" OAL, 59803 KVAL P/N: DES202208

Template Spring Plunger Fully Retractable L Shaped 1/4-20 Thread (FR-250P). KVAL P/N: MC3403A71

Valve, Humphrey, Operator Fingertip, 1/4 Min 3/8 Max Movement KVAL P/N: HUM34T

Directional Control Valve, Fabco 18 Series, PMD-3, 1/8" NPT, 3-WAY, Detented(Push-Pull), Panel Mount Button KVAL P/N: FAB18PMD3

Valve, SMC 4-Way Single Pilot With 3/8 Base KVAL P/N: SMCNVSA03A

DL-2, 96" Side Light Fixture KVAL P/N: 37-H1

Air Nozzle, UniJet Blow-off nozzle, 1/8 Male Thread, .023in Slot Width KVAL P/N: SPRAY-125

Option-G | Automatic Blow Off System

Option-H1 | Side Light Fixture

Pad, 60 Duro Green, 3-15/16 X 1-7/8 Molded with Steel Insert. KVAL P/N: P633006-N

Spare

Spare




DL

-2

Published on 2/8/2011

Parts Department

Monday thru Thursday 6:00 a.m. to 4:00 p.m. Pacific Time

Friday

6:00 a.m. to 1:00 p.m.

Email: [email protected]

Documents

About KVAL Machinery