Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
F I E R C E L Y I N D E P E N D E N T , S I N C E 1 9 4 9
Our Mission:We make a difference by innovating, designing, and manufacturing products that make our world safer, healthier, more accessible, and fashionable.
Thank you!
Trimco was founded in 1949 in Los Angeles, California. More than 70 years later, we continue to operate as a family owned and operated, independent business. Trimco has a team of more than 100 dedicated professionals focused on providing a remarkable customer experience.We take pride in being an independent, family-owned business. We strive every day to exceed our customers’ expectations.
2019 was a fantastic year of growth and further transformation for Trimco. We continue to be amazed at the support from our customers.
i
1.
4.
5.
6.
U.S. Govt. BHMA Description316P 316 Bright Stainless Steel316S 316 Satin Stainless Steel
Prime Coat - Grey600W Prime Coat - White
US3 Polished Brass, Clear CoatedUS3NL* Polished Brass, No LacquerUS4 Satin Brass, dull, clear coatedUS5* Satin Brass, blackened, relieved, clear coatedUS7* Satin Brass, blackened, bright relieved, clear coatedUS9* Polished Bronze, clear coatedUS10* Satin Bronze, clear coatedUS10B Dark Oxidized Satin Bronze, Oil Rubbed
613E Dark Oxidized Satin Bronze (Equivalent)US11* Satin Bronze, blackened, satin relieved, clear coatedUS15* Satin Nickel Plated, clear coatedUS15A* Satin Nickel, blackened, relieved, clear coatedUS19* Matte BlackUS26 Bright Chrome plated over nickelUS26D Satin Chrome plated over nickelUS28 Satin Aluminum, clear anodizedUS32 Bright Stainless SteelUS32D Satin Stainless Steel
630TG Trimguard Antimicrobial CoatingDark Bronze anodized AluminumBlack anodized Aluminum
710CU Healthy Hardware - Steralloy (Silver Color)RPC Red Powder Coat
Finishes with asterisks (*) are considered "Special" and are available upon request at the following prices (minimum will apply):
Some finishes are available on limited products. $1000 minimum NET or $500.00 Minimum NET set-up charge.Lifetime finishes are available by quotation.The lacquer finish on any brass or bronze product is not guaranteed. We suggest that these products be ordered withoutlacquer but be polished and waxed.
HOW TO USE THIS PRICE LIST
616
620622625
629
335
612
630
613
626
619
609610611
Pricing is as indicated for standard finishes. 605, 613, 625, 626, 628, 629 and 630. Additional finishes are available as shown below. If a price is not shown for a particular finish, it may be available at the special price or by special quotation if quantaties warrant. Minimum quantities may apply.
Items formerly offered, but not in this price list are available by special order and quotation only, provided basic materials & tooling are available.
Printed versions of this price list are for reference only. Please visit www.trimcohardware.com for the most recent revision.
2.
3.
313
628
Some products are marked with the following logos:
Products with a UL listing.
Products that meet ADA requirements.
600
When ordering, please use numbers and finishes as indicated in price list. It will expedite the entering of your order, and reduce the chance of error due to incorrect interpretation.
AVAILABLE FINISHES
10 or more pieces: pricing in "Special Finishes" columnLess than 10 pieces: pricing at 2x "Special Finishes" column
As a matter of convenience, those items commonly stocked are marked with a box surrounding the price. We will attempt to have the boxed items in-stock.
Products that can be manufactured with special bactericidal copper alloys.
605
606499
613/US10B is a true "living" finish and will patina over time. Due to the natural and expected changes, these finishes are not warrantied.
ii
Freight Policy:
Terms:
Minimum:
Packing, Handling & Invoicing:
Returns:
Discrepencies:
Cancellations:
Restocking Fees:
Pricing Misc:
Send Orders to [email protected]
b. 50 to 75% for fOCAL Pulls (in some cases not returnable - check with CSR)c. 50 to 75% for all Engineered Products:
• Terms are 1% 10, NET 30 days. Interest at the rate of 1.5% per month charged on overdue accounts.
• Items are priced individually unless otherwise indicated.• Invoiced price will be that which is in effect at time the order is received by TRIMCO, unless covered by a valid quotation.• All prices are subject to change or withdrawal without notice.
• All shipment and delivery dates on acknowledgements are estimates only. We will not be liable for air freight or other charges ifgoods are not shipped on estimated date.
• Quantity and pricing discrepencies; Trimco must be notified of quantity or pricing dircrepencies within 30 days ofinvoice date.
• For the service of itemizing and marking items by door number, 5% of NET invoice will be added to the total cost.
ORDER ACCEPTANCE CONDITIONS
• Returned goods will not be accepted unless the amount is over $100.00 NET and is authorized in writing by TRIMCO. All returnedgoods are subject to a minimum 40% charge for restocking and/or refinishing. Special or custom-made products including units thatare modified from standard units cannot be returned for credit. Exceptions to this policy will not be granted.
• While we will attempt to comply with customer's telephone or written change orders and/or cancellations, we cannot guaranteethat the change can be accomplished before shipment. Appropriate handling charges on returns will be assessed if the order hasbeen shippped before processing a change order request. Special or custom orders may not be cancelled after a 3 working daysperiod following date of acknowledgement. A cancellation charge of up to the price of the product will be made on any special orcustom-made items cancelled after such 3-day period.
a. 40% for standard items
• Full freight is allowed on orders of $1,000 or more, NET billing within continental U.S.. Canada- $2,500 or more. Other freightarrangements are available. TRIMCO retains the right to select the carrier. Hawaii - Trimco pays freight on all orders of $2,000 ormore. This includes ocean and delivery charges. Orders less than $2,000, customer pays all freight charges. Mexico- Trimco paysfreight on all orders of $1,000 or more (up to the U.S. border), customer pays balance from there on. Puerto Rico- Trimco paysground, ocean and island delivery on all orders of $3,000 or more. Orders of $1,000 to $2,499, Trimco pays ground continental U.S.only & customer pays ocean & island delivery charges. Less than $1,000, customer pays all freight charges. Others (Europe,Saudi Arabia, Japan, England, India, China Egypt, Etc.) Customer pays ALL freight Charges.• Oversized items must be shipped LTL. Minimum freight.
• Special bends on kick, mop or armor plates, by quotation only:- Type WA-A, WA-C, WA-B, WA-D, WA-E.
• Special finishes listed on the previous page, are available and priced in the price list. Special finishes not listed are available byquote only. Minimum quantities may apply.
• The minimum charge is $100.00 NET per invoice. The minimum online order is $50.00 NET per invoice. Orders less than thestated minimum will have a $20.00 NET processing fee added.
• No Credit will be allowed beyond 90 days after invoice date.• We will not accept after purchase labor charges.• We reserve the right to make product changes without notice.
- Automatic and Semi-automatic Flushbolts, coordinators, Hospital latches & 3900 Double bolts.d. Not returnable
- AP Series Architectural Pulls, Push bars, Push/pull bar sets, 612, 613 & special finishes, and custom products.
iii
700's Signage1000's 1/16" Push Plate1010's Pull Plates1060's Flush Pulls and Pocket Door Pulls1070's Pocket and Barn Door Pulls1080's Lock Guards1090's Anti-Vandal Pulls1100's Grips / Pulls1200's Stops / Bumpers / Holders
1300's - 1400's Modern Masterpiece: Elegant Entry Hardware1500's Latches, Push/Pull, Roller
1600's - 1700's Push Bars / Sets1800's 1/8" Push / Pull Plates1900's 3/16" Push / Pull Plates2000's Mail Plates / Accessories3090's Coordinators / Accessories3400's Handrail Brackets
3800's Automatic / Semi-Automatic Flushbolts / Accessories3900's Manual Flushbolts / Heavy-duty Surface Bolts4000's Door Guards / Commercial & Residential, Residential Surface Bolts5000's Astragals / Lock Indicators7000's fOCAL Architectural Hardware
FG8000's Frame GuardsPG 8000's Panic Guards
81's urbān Levers - Mortise90's urbān Levers - Mortise
K prefix followed by: Door ProtectionE then # Edge GuardsS then # Stretcher PlateA then # Armor PlateM then # Mop PlateØ then # Kick Plate
AP Architectural PullsDC Door Cap
LDH Lockdown HardwareT-Etch T-Etch Customized Push/Pull Plates and Protection PlatesT-Print T-Print Customized Pulls
Fantom Fantom Door Stops
GENERAL PRODUCT NUMBER CATEGORIES
iv
WE WARRANT THAT OUR PRODUCTS ARE GENERALLY FIT FOR THE PURPOSE FOR WHICH THEY WERE DESIGNED. PROPERLY SELECTED, PROPERLY INSTALLED AND NOT ABUSED IN USE, THEY WILL SERVE THE PURPOSE FOR WHICH THEY WERE INTENDED. WE DO NOT WARRANT THE MERCHANTABILITY OF OUR PRODUCTS, nor do we offer any other warranty of any kind, expressed or implied, and the customer may not extend any warranty on our behalf to anyone. Any such unauthorized extensions shall be the customer's responsibility. In no event shall we be liable to the customer in warranty, contract, strict liability or otherwise for any damages alleged to be caused by one or more of our products, beyond the cost to the customer of the subject product or products, refund of the purchase price being the customer's sole and exclusive remedy against us upon proof of any alleged claim. Incidental and consequential damages, including labor costs relating to installation or removal, shall not be our liability, and customer shall not have remedy against us for such damages, this sole and exclusive remedy for a proven claim having been stated above.
All materials and finishes meet ANSI/BHMA standards at time of shipment. We do not warrant finishes exposed to hostile environments.Customer is responsible for determining the suitability of our products for customer's use or resale, or for incorporating them into objects, or for applications which customer designs, assembles, constructs or manufactures.
WARRANTY DISCLAIMER; EXLUSIVE REMEDY
v
Part Description List Price
ADH Adhesive Application - Push PlateAdhesive Application - Kick PlateAdhesive Application - Armor PlateAbrasive Application
HB Beveled Edge - 4 Edges, Heavy Bevel - Kick PlateBeveled Edge - 4 Edges, Heavy Bevel - Armor Plate
CSK Counter Sinking for Kick & Mop Plates, eachCounter Sinking for Armor Plates, each
CFC Cut for Cylinder (Push/Pull Plates only)CUT-LOUVRE Cut for Louvre in Kick/Armor PlatesCUT-MORTISE Cut for Mortise Lock in Armor/Stretcher PlateCUT-ROSETTE Cut for Rosette in Armor/Stretcher PlateCYLT Cut for T-Turn (Push/Pull Plates only)
EXP-SHIELD Expansion Shield (Each)EXT-FAST Corrosion Resistant Fasteners for External Use 10.00
FLUSH MOUNT Attach Pull to Plate with Threaded InsertFR Full Round (Push/Pull Plates only)
HO Hold Open Feature for 1260's
PREP-COORD Prep Coordinator for Exit DevicePREP-SURFMOUNT Prep for Surface Mounting
RC Round Corners - Push/Pull PlatesRC-KP Round Corners - Kick PlatesRC-AP Round Corners - Armor PlatesROD-3917 Special Length up to 42" long (Specify)
SECURITY-SCREW Spanner, Tek, and Torx Head Screws EachSEX-BOLT-1420 Sex Bolt 1/4-20 x 1-1/2", eachSEX-BOLT-0832 Sex Bolt 8-32 x 1/2", eachSP-GRIPS Adapt Plate for Pull/GripSP-KNURL Knurled ApplicationSP-MOUNT Special MountingSP-SCREW Special Screws
UL UL Label - Protection Plates 15.00ULS UL Stamp - Protection Plates 25.00
NOTE: If more than one hole in plate, call for quote.
SPECIAL PRICE INFORMATION
35.00
30.00
8.75
5.008.75
25.00
20.00
30.0025.00
150.00
20.00
60.00
42.00
40.00
70.00
30.00
125.00
20.0015.00
15.0020.00
20.0019.0035.00
275.00
5.00
12.00
75.0060.0012.00
vi
LIST PRICE ADDER PER LOCATION FOR NON-STANDARD MOUNTING
MOUNTING METHODS AND PRICING
Thru-bolt & Finish Washer3/4" Dia. or Less: 1/4-20 Thread1" Dia. or More: 5/16-18 ThreadRight Hand Thread (RHT) StandardLeft Hand Thread (LHT) Add: $15.00/Loc. 3/18-16 Add: $15.00/Location
E - MountPrice: Standard Mounting
G - MountPrice: $10.50/Location
Back-to-BackThreaded Shoulder Bolt & Set Screws (x2)3/4" Dia. or Less: 1/4-20 Thread1" Dia. or More: 5/16-18 ThreadSpecial Shoulder Bolts Add: $23.00/Location
J - MountPrice: $10.50/Location
Concealed Mounting(Shown with Bushing)Threaded Shoulder Bolt & Set Screws (x2)3/4" Dia. or Less: 1/4-20 Thread1" Dia. or More: 5/16-18 ThreadSpecify Riv-Nut or Bushing if required.Special Shoulder Bolts Add: $23.00/Location
Back-to-Back Concealed MountingSpanner Turning Washer & StudFor Round BasesSpecify Metal, Wood or Glass Doors.
Concealed Mounting(Shown with Riv Nut)Spanner Turning Washer - Single MountFor Round BasesSpecify Metal or Wood Doors.
Thru-bolt with Flow-thru ButtonSingle Mount for Round BasesRight Hand Thread (RHT) StandardLeft Hand Thread (LHT) Add: $30.00/Loc.Specify Metal, Wood or Glass Doors.
L - MountPrice: $42.00/Location
M - MountPrice: $42.00/Location
N - MountPrice: $25.00/Location
W - MountPrice: $10.50/Location
Riv-NutPrice: $8.00/Each
BushingPrice: $8.00/Each
Glass Door KitIncludes clear spacer, (2) back plates &(2) felt washersSpecify glass thickness & hole diameterRequires mounting kit (i.e. N-Mount)
Riv-NutFor J or M Mounting on Aluminum DoorsR3: 1/4-20 ThreadR4: 5/16-18 ThreadR5: 3/8-16 Thread
Wood Thread to Machine ThreadFor J or M Mounting on Wood DoorsB3: 1/4-20 ThreadB4: 5/16-18 ThreadB5: 3/8-16 Thread
vii
FASTENER KITS
Grip Dia.Door
Thickness E G J L M N3/4" 3/8"-1/2" E2.X G2 J2 L31.6YY - N23.6YY3/4" 1-3/8" E3.X G3 J2 L32.6YY M37.6YY N33.6YY3/4" 1-3/4" E4.X G4 J2 L32.6YY M37.6YY N43.6YY3/4" 2-1/4" E5.X G5 J2 L33.6YY M37.6YY N53.6YY1" 3/8"-1/2" E7.X G7 J7 L41.6YY - N24.6YY1" 1-3/8" E8.X G8 J7 L42.6YY M47.6YY N34.6YY1" 1-3/4" E9.X G9 J7 L42.6YY M47.6YY N44.6YY1" 2-1/4" E10.X G10 J7 L43.6YY M47.6YY N54.6YY
1-1/4" 3/8"-1/2" E7.X G7 J7 L51.6YY - N25.6YY1-1/4" 1-3/8" E8.X G8 J7 L52.6YY M57.6YY N35.6YY1-1/4" 1-3/4" E9.X G9 J7 L52.6YY M57.6YY N45.6YY1-1/4" 2-1/4" E10.X G10 J7 L53.6YY M57.6YY N55.6YY
Finishes: E-Mount Finishes (.X) G & J Mounts For L, M & N Mounts, specify finish (.6YY).1 > 605/606 No finish code required For example: .605.2 > 611/612.3 > 613/613E/622.4 > 625, 626, 628, 629, 630
W-KITS: GLASS DOOR KITS
Grip Dia.Glass
ThicknessDia. of Hole
in GlassG & N
MountingL
Mounting3/4" 1/2" 1/2" W1.XXX W21.XXX .XXX- Specify Finish3/4" 1/2" 5/8" W2.XXX W22.XXX For example: 6303/4" 1/2" 3/4" W3.XXX W23.XXX3/4" 1/2" 7/8" W4.XXX W24.XXX3/4" 3/8" 1/2" W5.XXX W25.XXX1" 1/2" 1/2" W6.XXX W26.XXX1" 1/2" 5/8" W7.XXX W27.XXX1" 1/2" 3/4" W8.XXX W28.XXX1" 1/2" 7/8" W9.XXX W29.XXX1" 3/8" 1/2" W10.XXX W30.XXX
1-1/4" 1/2" 1/2" W11.XXX W31.XXX1-1/4" 1/2" 5/8" W12.XXX W32.XXX1-1/4" 1/2" 3/4" W13.XXX W33.XXX1-1/4" 1/2" 7/8" W14.XXX W34.XXX1-1/4" 3/8" 1/2" W15.XXX W35.XXX
Mounting Type
Mounting Type
MOUNTING KITS
viii
Trimco Type Model Plate CTC" Pull Number Pull Profile Pull Diameter16 Pull Plate 15 5" 1117-1 Cast Cast
18 Pull Plate 17 5" 1183-1 Cast Cast
51 Pull Plate 50 5" 1117-1 Cast Cast
1010 Pull Plate -2 1001-2 5" 1117-1 Cast Cast
-3 1001-3 5" 1117-1 Cast Cast
1012 Pull Plate -2 1001-2 5-1/2" 1109-1 Cast Cast
-3 1001-3 5-1/2" 1109-1 Cast Cast
1013 Pull Plate -2 1001-2 5-1/2" 1193-1 3/4" Ø
-2B 1001-2 8" 1193-2 3/4" Ø
-3 1001-3 5-1/2" 1193-1 3/4" Ø
-3B 1001-3 8" 1193-2 3/4" Ø
1014 Pull Plate -2 1001-2 6" 1199-1 1" Ø
-3 1001-3 6" 1199-1 1" Ø
-3B 1001-3 8" 1199-2 1" Ø
1015 Pull Plate -2 1001-2 6" 1139-1 1" X 3/8"
-3 1001-3 6" 1139-1 1" X 3/8"
-3B 1001-3 8" 1139-2 1" X 3/8"
1017 Pull Plate -2 1001-2 6" 1194-1 3/4" Ø
-2B 1001-2 8" 1194-2 3/4" Ø
-3 1001-3 6" 1194-1 3/4" Ø
-3B 1001-3 8" 1194-2 3/4" Ø
-3C 1001-3 10" 1194-3 3/4" Ø
1018 Pull Plate -2 1001-2 8" 1195-1 1" Ø
-2B 1001-2 10" 1195-2 1" Ø
-3 1001-3 8" 1195-1 1" Ø
-3B 1001-3 10" 1195-2 1" Ø
1035 Pull Plate -1 1001-1 6" 1135 Cast Cast
-2 1001-2 6" 1135 Cast Cast
-3 1001-3 6" 1135 Cast Cast
PULL PLATE COMPONENT CHART
3/4 Round
1/2 Round
Full Round
Full Round
ix
Trimco Type Model Plate CTC" Pull Number Pull Profile Pull Diameter1056 Pull Plate -4 1041-4 8" 1139-2 1" X 3/8"
1071-2 Pull Plate -2 1070-2 8" 58 Cast Cast
1802 Pull Plate -4 1807-4 6" 1139-1 1" X 3/8"
-25 1807-25 8" 1139-2 1" X 3/8"
1804 Pull Plate -4 1807-4 5" 1117-1 Cast Cast
1835 Pull Plate -2 1807-3 6" 1135 Cast Cast
-3 1807-4 6" 1135 Cast Cast
1894 Push/Pull Plate -3 1807-3 6" 1194-1 3/4" Ø
-3B 1807-3 8" 1194-2 3/4" Ø
-4 1807-4 6" 1194-1 3/4" Ø
-4B 1807-4 8" 1194-2 3/4" Ø
1895 Push/Pull Plate -3 1807-3 8" 1195-1 1" Ø
-3B 1807-3 10" 1195-2 1" Ø
-4 1807-4 8" 1195-1 1" Ø
-4B 1807-4 10" 1195-2 1" Ø
1896 Push/Pull Plate -4B 1807-4 10" 1195-1 1" Ø
1900 Pull Plate 1901 6-1/4" 1136 Cast Cast
1729 Pull Set Straight 1740 10" 1194-3 3/4" Ø
1731 Pull Set Straight 1741 10" 1195-2 1" Ø
1732 Pull Set Straight 1741 12" 1195-3 1" Ø
1737 Pull Set Offset 1741 10" 1191-3 1" Ø
1738 Pull Set Offset 1741 12" 1191-4 1" Ø
1746 Pull Set Straight 1745 18" 1195-6J 1-1/4" Ø
1746-1 Pull Set Straight 1745 12" 1195-3J 1-1/4" Ø
1747 Pull Set Offset 1745 18" 1191-5J 1-1/4" Ø
1747-1 Pull Set Offset 1745 12" 1191-4J 1-1/4" Ø
PULL PLATE COMPONENT CHART
Full Round
Full Round
Full Round
Full Round
x
PRODUCT NAME SERIES NUMBER
Anti-Vandal Trim - Tuf-Lok 1090 34-35Anti-Vandal Trim for Cylindrical Locks 1090 34-35Anti-Vandal Trim / Pulls 1090 34-35"Adjustre" Door Stop & Holder 1283 44Armor Plate KA 62Barn Door Latch 1074 33Cane Bolt 243 / 244 26Catch 3-Way 802 / 804 28Closet Ball Catch 1555 45Concealed Door Pull 1062 / 1063 31-32Coordinators and Accessories 3090 / 3092 / 3093 / 3094 53Crash Chain Stop 4048 57Cremone Bolt 3928 56Cylinder Pull 1822 51Deadbolt Only Pull 1822-2 51Decal Signage 771 / 773 28Door Guards 4015 / 4016 / 4017 57Door Knocker 620 / 621 / 625 27Door Pull - Architectural Pulls 3-24Door Pull - Varied Styles Various 25,37,38,44,45Door Pull - Classic Various 26Door Pull - Offset Entrance (Rd. Bar) 1191 38Drawer Pull 553 / 562 / 571 27Dubl-Bolt 3900 54Dust-proof Strike 3910 / 3911 55Edge Guards KE 63-64Escutcheon - Classic DISCONTINUEDFantom Stops 1Finger Guard KE39 64Round Flush Cup Pull / Drive Mount 1059 / 7059 31,58Finish Kit - Flushbolts 3830 54Flushbolt - Corner Mount 3999 56Flush Pulls 242 / 248 / 1060 / 1061 / 1110 / 1111 / 1113 / 1115 26,31,36Flush Pulls - Spindle Type 1066 / 1067 / 1068 32Flushbolt - Manual 3913 / 3915 / 3916 / 3917 55Flushbolt - Automatic, Semi-Automatic 3810 / 3820 / 3815L / 3825L 54fOCAL Contemporary Architectural Hardware Various 58-59Frame Protector FG8000 59Handrail Brackets 3405 / 3406 53Holders Various 39,41,42Hooks - Coat and Hat 3070 / 3071 / 3072 / 7010 / 7208 53,58,59Hospital Pulls 1134 / 1135 37Self-Illuminated "EXIT" Kick Plate 10X34.ILLUM.630 63Kick Plates K0 62
PRICE LIST PAGE
INDEX BY PRODUCT
xi
PRODUCT NAME SERIES NUMBER
Lockdown Hardware 2Lock Guard 1082 34Lock Astragal 5000T / 5001 / 5002 / 5022A 57Mail Plate and Accessories 2082 / 2085 / 2091 52Mastercraft Various 25Modern Masterpieces Various 44-45Mop Plates KM 62Panic Guards PG8000 60Pipe Adapter Strike 1260P 42Plate, Anchor 1268 43Pocket Door Pulls 1064 / 1065 / 1069 32-33Pull Plates - Classic Various 25Pull Plates - Varied Styles Various 30,31,50,51,52Push Bars, Sets 1600 / 1700 49-50Push Plates 1001 / 1807 / 7001 / 7009 25,29,58Push Plates - Classic Various 25Push / Pull Latches 1562 / 1563 / 1580 / 1581 / 1591 46-48Restroom Signage 500 26-28Risers 1211CL / 1211CH / 1257R 40,42Roller Latches 1554 / 1559 45-46Signage - Engraved 760 / 793 28Silencers 1229A, 1229B, 1229EL 41Sliding Door Pull 1064 / 1065 / 1069 / 1074 32-33Stops Various 39,42,44,58,59Stretcher Plates KS 62Strikes 1559 46Surface Bolts 3920 / 3921 / 3922 / 3923 / 4800 56-57Universal Stops 1211 40urbān 81 / 90 61Viewers 975 / 976 29Wall Bumper 1270 / 1275 / 1277 / 1278 / 7276 / 7278 43,44,59
PRICE LIST PAGE
INDEX BY PRODUCT
xii
Tria
ngle
Bra
ss M
fg.,
Com
pany
1351
Roc
ky P
oint
Driv
e, O
cean
side
, CA
9205
6PH
: (32
3) 2
62-4
191
FX:
(800
) 637
-874
6
Mfg
Hdw
/Par
t #
EXA
LHR
SCH
LAG
EL9
080
630
2-3/
4"N
ON
ESI
NG
LE
1-1/
4"
EXB
RH
RVO
N D
UPR
IN99
NLO
P63
03-
3/8"
4954
299
PAIR
1-1/
4"
1 2 3 4 5 6 7 8 9 10 DO
AN
Y AD
D'L
MTG
PO
STS
NEE
D T
O B
E AD
DED
FO
R L
OC
KSE
T W
/ IN
TER
IOR
ESC
UTC
HEO
N P
LTS?
IF Y
ES, P
LEAS
E AT
TAC
H T
EMPL
ATE
WIL
L YO
U B
E U
SIN
G A
NY
RIG
ID O
R A
DJU
STAB
LE A
STR
AGAL
S, S
EALS
, BR
USH
ES, E
TC?(
ex: P
EMK
O/N
GP)
*PLE
ASE
NO
TE:
YOU
MU
ST S
UPP
LY T
EMPL
ATE
FOR
EXI
T D
EVIC
E, E
SCU
TCH
EON
, C
YLIN
DER
PR
EP, S
EALS
, ET
C.
LNQ
TYC
OM
PLET
E 10
90
SERI
ES P
ART
#Ha
ndin
g of
Do
or
Mat
ing
info
rmat
ion
Mar
king
s
NC
=No
Cyl
inde
r / R
C=R
ound
Cor
ners
/ SP
=Mou
ntin
g Po
st M
ated
to P
anic
or L
ock
Fini
shB
acks
et to
Ce
nter
of C
yl.
Mul
lion
Type
(If a
pplic
able
)St
rike
type
Door
Typ
e (S
ingl
e / P
air)
Dia
. of C
yl. H
ole
I-1/4
or 1
-1/2
FRO
M:_
____
____
____
____
____
____
____
____
____
____
__
CO
NTA
CT:
____
____
____
____
____
____
___
P
O#:
____
____
____
____
__
TO: T
RIM
CO
AT
TN:O
RD
ER E
NTR
Y
EMAI
L:C
SR@
TRIM
CO
HAR
DW
ARE.
CO
M
SO#:
____
____
____
____
__
DAT
E:
CU
ST ID
:
**N
OTE
: BEF
OR
E W
E PR
OC
ESS
YOU
R O
RD
ER, W
E N
EED
TH
E FO
LLO
WIN
G IN
FOR
MAT
ION
**10
90, 1
091,
109
6, &
109
7 SE
RIE
S AN
TI V
AND
AL P
ULL
INFO
RM
ATIO
N S
HEE
TPL
EASE
NO
TE:
YOU
MU
ST S
UPP
LY T
EMPL
ATE
FOR
EXI
T D
EVIC
E, E
SCU
TCH
EON
, C
YLIN
DER
PR
EP, S
EALS
, ET
C.
NO
YES
NO
IF Y
ESM
ANU
FAC
TUR
ERM
OD
EL #
YES
xii
With Trimco Online, you will have access to:
1.
2.3. Check product inventory and product availability.3. Find order status and shipment tracking information.4.
Company name:
Address (Street or P.O. Box and City, State & Zip):
Tele #: Fax #:
Administrator:(Print or type clearly)
(Print or type clearly first and last name of user)
Email #1:(Print or type clearly)
(Print or type clearly first and last name of user)
Email #2:
(Print or type clearly first and last name of user)
Do you prefer to receive your acknowledgements (sales and/or quotes) via fax, mail or email? (circle one)
Purchasing Fax #: A/P Fax #:
Authorizing signature: Print Name: (Print or type clearly)
Title: Date:
ONLINE STORE APPLICATION
The administrator is responsible for authorizing access to the Online Store to place orders and check on orders. This person will also be responsible for taking away access to the Online Store from people who you no longer want to have the ability for place orders online for your company. Trimco will not be held responsible for any order placed online by an unauthorized
View date entered and anticipated ship date.
Place orders online for stock items and receive a sales order acknowledgement emailed within minutes. Orders can be placed for "ship complete" or "ship & B/O". Custom and special items will still need to be emailed or faxed into the factory
All orders placed through the Online Store will receive an additional 2% discount, included in each items pricing. $50.00 minimum for online orders only.
To set-up an online account, fill-in the form below and email it to [email protected], Attn: Alicia Mirando. A return e-mail with login information will be sent when available. Additional users can be added on a seperate form.
xiv
FANTOM MAGNETIC DOOR STOPS
TRIMCO DESCRIPTION CLEAR BLACK WHITE 605 625 626 Special Finishes
PREMIUM FANTOM
FANTOM-P Fantom Premium Door Stop 42.00 42.00 42.00 50.00 50.00 50.00 BY QUOTEMagnetic door stop for swing doors.
FIRE FANTOM
FANTOM-F Fire Fantom Door Stop 72.00 BY QUOTEMagnetic door stop for fire doors.
BARN DOOR FANTOM
FANTOM-B Barn Door Fantom Stop 44.00 44.00 44.00 52.00 52.00 52.00 BY QUOTEMagnetic door stop for barn doors.
FANTOM ACCESSORIES
FANTOM-INSTALL Installation kit for Fantom Stops 38.006-piece installation kit.
FANTOM-CARPET 14mm Punch for Carpet Installations 30.00
FANTOM-TILE 15mm Diamond Corer for Tile Installations 30.00
FANTOM-ALUMDOOR Magnet Housing for installation on 9.00hollow aluminum or steel doors.
FANTOM-SHIM For use with doors exceeding 10mm 9.00(roughly 5/16") door gap.
FANTOM-FACEMOUNT Kit to change a Premium Fantom Stop 25.00 25.00 BY QUOTEto Fire Fantom Stop.
MOUNTED FANTOM SAMPLES
FANTOM-SAMPLE-P Mounted Fantom Premium Sample 75.00
FANTOM-SAMPLE-F Mounted Fantom Fire Sample 75.00
PRICE LIST 20
FANTOM DOOR STOPS
1
LDH100 SERIES: LOCKDOWN HARDWARE
TRIMCO DESCRIPTION 605/606 690 625 626Red
Powder Coat (RPC)
Special Finishes
PRECISION: APEX 2000 SERIES
LDH100-PHI Precision - Lockdown Hardware 270.00 270.00 270.00 240.00 280.00 QUOTEFor use with Apex 2000 Series 690 Finish
LDH100-PHI-48-TUBE Kit for 48" PHI Apex 2000 Devices 25.00Includes replacement tube and cotter pin
DORMA: 9000 SERIES
LDH100-DM Dorma - Lockdown Hardware 270.00 270.00 270.00 240.00 280.00 QUOTEFor use with Dorma 9000 Series Devices 690 Finish
LDH100-DM-48-TUBE Kit for 48" Dorma 9000 Series Devices 25.00Includes replacement tube and cotter pin
VON DUPRIN: 98/99 AND 33/35 SERIES
LDH100-VD Von Duprin - Lockdown Hardware 270.00 270.00 270.00 240.00 280.00 QUOTEFor use with 98/99 and 33/35 Devices 690 Finish
LDH100-VD-48TUBE Kit for 48" VD Devices 25.00Includes replacement tube and cotter pin
LDH100-VD-97CAM Cam Replacement Kit: Pre-1997 Devices 25.00Includes replacement cam and cotter pin
MLDHVD00013 VD replacement end cap bracket 20.00
Note(s): Simple one-touch mechanical lockdown for panic devices.Cost-effective, aftermarket or new construction solution.Does not require a key or hex-wrench to lock down doors.Durable construction.ADA compliant.Easy installation requires no special tools or removal of hardware.Works with hex or cylinder dogging devices.
PRICE LIST 20
LDH100 SERIES - LOCKDOWN HARDWARE
LDH100-DM
LDH100-VD
LDH100-PHI
2
E Standard 0 • Custom 25.00G 21.00 1 • 3/8" No Charge 50.00J 21.00 2 • 1/2" No Charge 50.00 18" - 23" 750.00L 84.00 3 • 1-3/8" No Charge 85.00 24" - 35" 1100.00M 84.00 4 • 1-3/4" No Charge 36" - 48" 1450.00N 50.00 5 • 2" No Charge 100.00
6 • 2-1/4" 10.00 100.007 • 2-1/2" 10.00 170.008 • 3" 10.00
Family CTC Size 605/606 611/612 613 613E 622 625/626 628 629 316P 630 316S 710Special
Finishes3/4" Diameter - Bent Pulls
18" 98.00 126.00 98.00 74.00 74.00 98.00 53.00 67.00 89.00 56.00 74.00 140.00 132.00
24" 170.00 219.00 170.00 127.00 127.00 170.00 91.00 117.00 153.00 97.00 127.00 243.00 230.00
36" 288.00 369.00 288.00 214.00 214.00 288.00 153.00 197.00 257.00 164.00 214.00 410.00 389.00
48" 404.00 520.00 404.00 301.00 301.00 404.00 216.00 278.00 362.00 231.00 301.00 577.00 545.00
1" Diameter - Bent Pulls24" 233.00 300.00 233.00 174.00 174.00 233.00 124.00 160.00 209.00 133.00 174.00 333.00 315.00
36" 396.00 508.00 396.00 294.00 294.00 396.00 211.00 271.00 353.00 226.00 294.00 565.00 534.00
48" 558.00 717.00 558.00 415.00 415.00 558.00 297.00 383.00 498.00 319.00 415.00 797.00 752.00
1-1/4" Diameter - Bent Pulls24" 495.00 636.00 495.00 368.00 368.00 495.00 263.00 339.00 442.00 283.00 368.00 706.00 668.00
36" 657.00 844.00 657.00 489.00 489.00 657.00 350.00 451.00 587.00 375.00 489.00 938.00 886.00
48" 819.00 1053.00 819.00 609.00 609.00 819.00 436.00 562.00 732.00 468.00 609.00 1170.00 1106.00
3/4" Diameter - Mitered Pulls8" 377.00 270.00 377.00 281.00 281.00 377.00 233.00 243.00 337.00 216.00 281.00 510.00
10" 410.00 293.00 410.00 305.00 305.00 410.00 254.00 263.00 367.00 234.00 305.00 555.00
12" 419.00 299.00 419.00 312.00 312.00 419.00 259.00 268.00 374.00 239.00 312.00 566.00
18" 493.00 353.00 493.00 366.00 366.00 493.00 304.00 316.00 439.00 282.00 366.00 666.00
24" 567.00 405.00 567.00 422.00 422.00 567.00 351.00 363.00 506.00 324.00 422.00 766.00
36" 726.00 519.00 726.00 539.00 539.00 726.00 449.00 465.00 647.00 415.00 539.00 980.00
48" 764.00 545.00 764.00 567.00 567.00 764.00 471.00 489.00 680.00 436.00 567.00 1032.00
1" Diameter - Mitered Pulls8" 509.00 364.00 509.00 379.00 379.00 509.00 315.00 326.00 455.00 291.00 379.00 688.00
10" 551.00 394.00 551.00 409.00 409.00 551.00 340.00 353.00 492.00 315.00 409.00 743.00
12" 572.00 409.00 572.00 426.00 426.00 572.00 354.00 367.00 511.00 327.00 426.00 773.00
18" 635.00 454.00 635.00 472.00 472.00 635.00 393.00 407.00 567.00 363.00 472.00 857.00
24" 697.00 498.00 697.00 518.00 518.00 697.00 430.00 446.00 622.00 398.00 518.00 941.00
36" 819.00 586.00 819.00 609.00 609.00 819.00 506.00 525.00 732.00 468.00 609.00 1107.00
48" 887.00 634.00 887.00 660.00 660.00 887.00 548.00 569.00 792.00 507.00 660.00 1198.00
1-1/4" Diameter - Mitered Pulls8" 690.00 493.00 690.00 512.00 512.00 690.00 426.00 441.00 615.00 394.00 512.00 931.00
10" 740.00 529.00 740.00 549.00 549.00 740.00 457.00 474.00 660.00 423.00 549.00 999.00
12" 785.00 561.00 785.00 583.00 583.00 785.00 485.00 503.00 701.00 449.00 583.00 1060.00
18" 821.00 587.00 821.00 610.00 610.00 821.00 507.00 526.00 733.00 469.00 610.00 1109.00
24" 857.00 612.00 857.00 637.00 637.00 857.00 529.00 548.00 765.00 490.00 637.00 1157.00
36" 927.00 663.00 927.00 690.00 690.00 927.00 573.00 594.00 828.00 530.00 690.00 1252.00
48" 1034.00 739.00 1034.00 768.00 768.00 1034.00 638.00 662.00 921.00 591.00 768.00 1395.00
1-1/2" Diameter - Mitered Pulls8" 860.00 614.00 860.00 638.00 638.00 860.00 531.00 549.00 766.00 491.00 638.00 1205.00
10" 884.00 632.00 884.00 656.00 656.00 884.00 546.00 566.00 788.00 505.00 656.00 1287.00
12" 926.00 662.00 926.00 688.00 688.00 926.00 572.00 593.00 826.00 530.00 688.00 1383.00
18" 952.00 681.00 952.00 707.00 707.00 952.00 588.00 610.00 850.00 544.00 707.00 1396.00
24" 982.00 701.00 982.00 730.00 730.00 982.00 606.00 628.00 876.00 562.00 730.00 1411.00
36" 1048.00 749.00 1048.00 780.00 780.00 1048.00 648.00 671.00 935.00 599.00 780.00 1435.00
48" 1157.00 827.00 1157.00 859.00 859.00 1157.00 714.00 741.00 1030.00 662.00 859.00 1636.00
All ColorsSame Price
AP100 SERIES: STRAIGHT BENT & MITERED PULLS
NEW AP SERIES ARCHITECTURAL PULLS
Mounting Types/Pull Door Thickness Leather Wrapped
PRICE ADDERS - LIST PRICE PER PULL
AP1811-1/4" DiameterStraight PullsMitered
BTB Pulls
Single PullEngraving
Z • CustomizeY • PULL/Interior & PUSH/ExteriorX • PUSH/Interior & PULL/Exterior
AP1311-1/4" DiameterStraight PullsBent
AP1711-1/4" DiameterStraight PullsMitered
AP1611" DiameterStraight PullsMitered
AP1513/4" DiameterStraight PullsMitered
AP1113/4" DiameterStraight PullsBent
AP1211" DiameterStraight PullsBent
W • CustomizeV • PULLU • PUSH
AP100Straight Bent Pulls AP100
Straight Mitered Pulls
3
E Standard 0 • Custom 25.00G 21.00 1 • 3/8" No Charge 50.00J 21.00 2 • 1/2" No Charge 50.00 18" - 23" 750.00L 84.00 3 • 1-3/8" No Charge 85.00 24" - 35" 1100.00M 84.00 4 • 1-3/4" No Charge 36" - 48" 1450.00N 50.00 5 • 2" No Charge 100.00
6 • 2-1/4" 10.00 100.007 • 2-1/2" 10.00 170.008 • 3" 10.00
Family CTC Size 605/606 611/612 613 613E 622 625/626 628 629 316P 630 316S 710SpecialFinishes
3/4" Diameter12" 166.00 214.00 166.00 123.00 123.00 166.00 89.00 114.00 149.00 95.00 123.00 237.00 224.00
18" 194.00 249.00 194.00 144.00 144.00 194.00 103.00 133.00 174.00 111.00 144.00 277.00 261.00
24" 267.00 344.00 267.00 199.00 199.00 267.00 142.00 183.00 239.00 153.00 199.00 382.00 361.00
36" 387.00 497.00 387.00 287.00 287.00 387.00 206.00 265.00 345.00 221.00 287.00 552.00 522.00
48" 507.00 650.00 507.00 376.00 376.00 507.00 269.00 347.00 452.00 289.00 376.00 723.00 683.00
1" Diameter24" 326.00 419.00 326.00 243.00 243.00 326.00 174.00 224.00 292.00 186.00 243.00 466.00 440.00
36" 500.00 643.00 500.00 372.00 372.00 500.00 266.00 344.00 447.00 286.00 372.00 714.00 676.00
48" 676.00 868.00 676.00 502.00 502.00 676.00 360.00 464.00 603.00 386.00 502.00 964.00 912.00
1-1/4" Diameter24" 558.00 717.00 558.00 414.00 414.00 558.00 297.00 383.00 497.00 319.00 414.00 796.00 753.00
36" 732.00 941.00 732.00 544.00 544.00 732.00 390.00 502.00 654.00 418.00 544.00 1045.00 989.00
48" 907.00 1166.00 907.00 674.00 674.00 907.00 482.00 622.00 809.00 518.00 674.00 1295.00 1224.00
AP2211" DiameterOffset Pulls
AP2311-1/4" DiameterOffset Pulls
AP2113/4" DiameterOffset Pulls
Mounting Types/Pull Door Thickness
Y • PULL/Interior & PUSH/ExteriorZ • Customize
AP200 SERIES: OFFSET BENT PULLS
NEW AP SERIES ARCHITECTURAL PULLS
PRICE LIST 20
PRICE ADDERS - LIST PRICE PER PULL
Engraving Leather WrappedSingle Pull All Colors
Same PriceU • PUSHV • PULLW • Customize
BTB PullsX • PUSH/Interior & PULL/Exterior
AP200Offset Bent Pulls
4
AP300 SERIES: ADJUSTABLE & CONFIGURABLE PULLS (Formerly 1185 Series)
Family Standoffs End Cap OA Size 630 710Special
Finishes
18" 309.00 390.0024" 361.00 476.0036" 412.00 559.0048" 464.00 641.0060" 515.00 724.0072" 567.00 806.0018" 320.00 400.0024" 371.00 487.0036" 423.00 569.0048" 474.00 651.0060" 526.00 734.0072" 577.00 816.0018" 330.00 410.0024" 382.00 497.0036" 433.00 579.0048" 485.00 662.00 A 71060" 536.00 744.00 B 60572" 588.00 827.00 C 60618" 340.00 421.00 D 60924" 392.00 507.00 E 61136" 443.00 590.00 F 61248" 495.00 672.00 G 61360" 546.00 754.00 H 62872" 598.00 837.00 I 62918" 351.00 431.00 J 63024" 402.00 518.00 K 33536" 454.00 600.00 End Cap Insert - Per Pull48" 505.00 682.00 B Black60" 557.00 765.00 N None72" 608.00 847.0018" 361.00 441.0024" 412.00 528.0036" 464.00 610.0048" 515.00 693.0060" 567.00 775.0072" 618.00 857.00
Call for Quote
75.00
3 • 1-3/8"
0 • Custom
Call for Quote
Call for Quote
Call for Quote
Call for Quote
75.0075.00
No Charge
PRICE LIST 20
AP3131-1/4" DiameterAdjustable Ladder PullStraight Standoffs2" End Caps
Straight 2.0"
AP3141-1/4" DiameterAdjustable Ladder PullOffset Standoffs0.5" End Caps
Offset 0.5"
8 • 3" 10.00
5 • 2" No Charge6 • 2-1/4" 10.00
21.00
Mounting TypesNo ChargeE
75.00
No Charge4 • 1-3/4" No Charge
75.00
7 • 2-1/2" 10.00
End Cap Finish - Per Pull End Cap Options
75.0075.0075.00
AP3151-1/4" DiameterAdjustable Ladder PullOffset Standoffs1" End Caps
Offset 1.0"
NEW AP SERIES ARCHITECTURAL PULLS
No Charge
21.00JDoor Thickness
1-1/4" Diameter
AP3111-1/4" DiameterAdjustable Ladder PullStraight Standoffs0.5" End Caps
Straight 0.5"
PRICE ADDERSLIST PRICE PER PULL
25.001 • 3/8"
G
MidPostP 85.00
AP3121-1/4" DiameterAdjustable Ladder PullStraight Standoffs1" End Caps
Straight 1.0"
2 • 1/2" No Charge
10.00No Charge
No Charge
Standard on 710
AP3161-1/4" DiameterAdjustable Ladder PullOffset Standoffs2" End Caps
Offset 2.0" Call for Quote
5
AP320 SERIES: ALL-ALUMINUM ADJUSTABLE PULLS
Family Standoffs OA Size 628 313 335Special
Finishes
18" 130.00 150.00 150.00
30" 138.00 159.00 159.00
42" 145.00 167.00 167.00
60" 172.00 194.00 194.00
72" 190.00 212.00 212.00
84" 208.00 230.00 230.00
96" 226.00 248.00 248.00
18" 160.00 184.00 184.00
30" 168.00 193.00 193.00
42" 175.00 202.00 202.00
60" 202.00 229.00 229.00
72" 220.00 247.00 247.00
84" 238.00 265.00 265.00
96" 256.00 283.00 283.00
8 • 3" 10.00
P 55.00
MidPost
Offset
AP324 - All Aluminum1-1/4" DiameterAdjustable Ladder PullOffset StandoffsRadius Ends
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
PRICE ADDERSLIST PRICE PER PULL
Mounting Types
E No Charge
1-1/4" Diameter
AP323 - All Aluminum1-1/4" DiameterAdjustable Ladder PullOffset StandoffsSquare Ends
G 21.00
J 21.00
Door Thickness
0 • Custom 25.00
1 • 3/8"
2 • 1/2" No Charge
3 • 1-3/8" No Charge
Offset Call for Quote
Call for Quote
7 • 2-1/2" 10.00
4 • 1-3/4" No Charge
5 • 2" No Charge
6 • 2-1/4" 10.00
No Charge
6
AP300 SERIES: ADJUSTABLE & CONFIGURABLE PULLS (Formerly 1185 Series)
LIST PRICING TO ORDER COMPONENTS
Grips630 710 628 313 / 335
M1185017xxx 1185-18 Grip 128.00 192.00 62.00 72.00M1185029xxx 1185-30 Grip 182.00 277.00 70.00 81.00M1185041xxx 1185-42 Grip 234.00 362.00 78.00 90.00
Notes: Specify finish code for xxxAP310 Family (630/710 finishes): Grips include tube nuts to attach end caps.AP320 Family (628/313/335 finishes): Grips are solid anodized aluminum.
Standoffs (per standoff)630 710
Finishes as Noted
AP310 Family (630/710 finishes)M1185000xxx Straight, E Mount (Thru-bolt) 64.00 64.00M1185001xxx Straight, G Mount (BTB) 75.00 75.00M1185010xxx Offset, E Mount (Thru-bolt) 75.00 75.00M1185011xxx Offset, G Mount (BTB) 85.00 85.00
AP320 Family (628/313/335 finishes)M1185102843 Offset, E Mount (Thru-bolt) > 628 Finish 35.00M1185112843 Offset, G/J Mount (BTB/Concealed) > 628 Finish 45.00M1185101343 Offset, E Mount (Thru-bolt) > 313 Finish 40.50M1185111343 Offset, G/J Mount (BTB/Concealed) > 313 Finish 52.00M1185103543 Offset, E Mount (Thru-bolt) > 335 Finish 40.50M1185113543 Offset, G/J Mount (BTB/Concealed) > 335 Finish 52.00
Notes: Specify finish code for xxxStandoffs include set screw with Loctite.
Mounting Kits (per mounting location)
E9.4 E - Thru-bolt (630 / 710 / 628 finishes) 5.75E9.3 E - Thru-bolt (313 / 335 finishes) 5.75G9.0 G - Back-to-Back 10.50J7.0 J - Singled-Sided Concealed 10.50
Notes: For 1-3/4" thick doors standard. Specify if different door thickness is required.
End Caps (set of 2) 630 710N1185000xxx 0.5" Length 48.50 54.00N1185001xxx 1" Length 54.00 64.00N1185002xxx 2" Length 59.00 76.00
Notes: Only required and used on AP310 family (630/710 finishes)Specify finish code for xxxEnd caps include fasteners with Loctite.
Inserts (set of 2)
M1185002232 B - 1/8" Black 12.00Notes: Optional black architectural insert; between grip and end cap.
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
7
E Standard 25.00 P 75.00G 21.00 No Charge 50.00J 21.00 No Charge 50.00L 84.00 No Charge 85.00M 84.00 No Charge
N 50.00 No Charge 100.0010.00 100.0010.00 170.0010.00
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316S 710SpecialFinishes
1" Diameter12" 351.00 380.00 380.00 380.00 185.00 185.00 135.00 171.00 222.00 142.00 185.00 320.00 439.0018" 372.00 402.00 402.00 402.00 213.00 213.00 155.00 196.00 255.00 163.00 213.00 367.00 466.0024" 393.00 425.00 425.00 425.00 240.00 240.00 176.00 221.00 287.00 184.00 240.00 414.00 492.0036" 435.00 471.00 471.00 471.00 294.00 294.00 218.00 271.00 353.00 226.00 294.00 509.00 544.0048" 477.00 516.00 516.00 516.00 349.00 349.00 236.00 322.00 418.00 268.00 349.00 603.00 597.0060" 504.00 545.00 545.00 545.00 385.00 385.00 263.00 355.00 462.00 296.00 385.00 665.00 630.0072" 533.00 576.00 576.00 576.00 420.00 420.00 291.00 388.00 504.00 323.00 420.00 726.00 666.0084" 560.00 605.00 605.00 605.00 455.00 455.00 319.00 420.00 546.00 350.00 455.00 788.00 701.0096" 587.00 635.00 635.00 635.00 492.00 492.00 346.00 454.00 591.00 378.00 492.00 851.00 734.0012" 381.00 410.00 410.00 410.00 215.00 215.00 165.00 201.00 252.00 172.00 215.00 350.00 469.0018" 402.00 432.00 432.00 432.00 243.00 243.00 185.00 226.00 285.00 193.00 243.00 397.00 496.0024" 423.00 455.00 455.00 455.00 270.00 270.00 206.00 251.00 317.00 214.00 270.00 444.00 522.0036" 465.00 501.00 501.00 501.00 324.00 324.00 248.00 301.00 383.00 256.00 324.00 539.00 574.0048" 507.00 546.00 546.00 546.00 379.00 379.00 266.00 352.00 448.00 298.00 379.00 633.00 627.0060" 534.00 575.00 575.00 575.00 415.00 415.00 293.00 385.00 492.00 326.00 415.00 695.00 660.0072" 563.00 606.00 606.00 606.00 450.00 450.00 321.00 418.00 534.00 353.00 450.00 756.00 696.0084" 590.00 635.00 635.00 635.00 485.00 485.00 349.00 450.00 576.00 380.00 485.00 818.00 731.0096" 617.00 665.00 665.00 665.00 522.00 522.00 376.00 484.00 621.00 408.00 522.00 881.00 764.0012" 381.00 410.00 410.00 410.00 215.00 215.00 165.00 201.00 252.00 172.00 215.00 350.00 469.0018" 402.00 432.00 432.00 432.00 243.00 243.00 185.00 226.00 285.00 193.00 243.00 397.00 496.0024" 423.00 455.00 455.00 455.00 270.00 270.00 206.00 251.00 317.00 214.00 270.00 444.00 522.0036" 465.00 501.00 501.00 501.00 324.00 324.00 248.00 301.00 383.00 256.00 324.00 539.00 574.0048" 507.00 546.00 546.00 546.00 379.00 379.00 266.00 352.00 448.00 298.00 379.00 633.00 627.0060" 534.00 575.00 575.00 575.00 415.00 415.00 293.00 385.00 492.00 326.00 415.00 695.00 660.0072" 563.00 606.00 606.00 606.00 450.00 450.00 321.00 418.00 534.00 353.00 450.00 756.00 696.0084" 590.00 635.00 635.00 635.00 485.00 485.00 349.00 450.00 576.00 380.00 485.00 818.00 731.0096" 617.00 665.00 665.00 665.00 522.00 522.00 376.00 484.00 621.00 408.00 522.00 881.00 764.0012" 411.00 440.00 440.00 440.00 245.00 245.00 195.00 231.00 282.00 202.00 245.00 380.00 499.0018" 432.00 462.00 462.00 462.00 273.00 273.00 215.00 256.00 315.00 223.00 273.00 427.00 526.0024" 453.00 485.00 485.00 485.00 300.00 300.00 236.00 281.00 347.00 244.00 300.00 474.00 552.0036" 495.00 531.00 531.00 531.00 354.00 354.00 278.00 331.00 413.00 286.00 354.00 569.00 604.0048" 537.00 576.00 576.00 576.00 409.00 409.00 296.00 382.00 478.00 328.00 409.00 663.00 657.0060" 564.00 605.00 605.00 605.00 445.00 445.00 323.00 415.00 522.00 356.00 445.00 725.00 690.0072" 593.00 636.00 636.00 636.00 480.00 480.00 351.00 448.00 564.00 383.00 480.00 786.00 726.0084" 620.00 665.00 665.00 665.00 515.00 515.00 379.00 480.00 606.00 410.00 515.00 848.00 761.0096" 647.00 695.00 695.00 695.00 552.00 552.00 406.00 514.00 651.00 438.00 552.00 911.00 794.00
AP4111" DiameterStraight StandoffsSquare Ends
AP4121" DiameterStraight StandoffsRadius Ends
AP4131" DiameterOffset StandoffsSquare Ends
AP4141" DiameterOffset StandoffsRadius Ends
6 • 2-1/4" Y • PULL/Interior & PUSH/Exteri7 • 2-1/2" Z • Customize8 • 3"
3 • 1-3/8" W • Customize4 • 1-3/4" BTB Pulls5 • 2" X • PUSH/Interior & PULL/Exteri
0 • Custom Single Pull1 • 3/8" U • PUSH2 • 1/2" V • PULL
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP400 SERIES: STANDARD LADDER PULLS (Formerly 1160 & 1170 Series)
PRICE ADDERS - LIST PRICE PER PULL
Mounting Types/Pull Door Thickness Engraving MidPost
8
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP400 SERIES: STANDARD LADDER PULLS (Formerly 1160 & 1170 Series)
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316S 710SpecialFinishes
1" Diameter12" 381.00 410.00 410.00 410.00 215.00 215.00 165.00 201.00 252.00 172.00 215.00 350.00 469.0018" 402.00 432.00 432.00 432.00 243.00 243.00 185.00 226.00 285.00 193.00 243.00 397.00 496.0024" 423.00 455.00 455.00 455.00 270.00 270.00 206.00 251.00 317.00 214.00 270.00 444.00 522.0036" 465.00 501.00 501.00 501.00 324.00 324.00 248.00 301.00 383.00 256.00 324.00 539.00 574.0048" 507.00 546.00 546.00 546.00 379.00 379.00 266.00 352.00 448.00 298.00 379.00 633.00 627.0060" 534.00 575.00 575.00 575.00 415.00 415.00 293.00 385.00 492.00 326.00 415.00 695.00 660.0072" 563.00 606.00 606.00 606.00 450.00 450.00 321.00 418.00 534.00 353.00 450.00 756.00 696.0084" 590.00 635.00 635.00 635.00 485.00 485.00 349.00 450.00 576.00 380.00 485.00 818.00 731.0096" 617.00 665.00 665.00 665.00 522.00 522.00 376.00 484.00 621.00 408.00 522.00 881.00 764.0012" 411.00 440.00 440.00 440.00 245.00 245.00 195.00 231.00 282.00 202.00 245.00 380.00 499.0018" 432.00 462.00 462.00 462.00 273.00 273.00 215.00 256.00 315.00 223.00 273.00 427.00 526.0024" 453.00 485.00 485.00 485.00 300.00 300.00 236.00 281.00 347.00 244.00 300.00 474.00 552.0036" 495.00 531.00 531.00 531.00 354.00 354.00 278.00 331.00 413.00 286.00 354.00 569.00 604.0048" 537.00 576.00 576.00 576.00 409.00 409.00 296.00 382.00 478.00 328.00 409.00 663.00 657.0060" 564.00 605.00 605.00 605.00 445.00 445.00 323.00 415.00 522.00 356.00 445.00 725.00 690.0072" 593.00 636.00 636.00 636.00 480.00 480.00 351.00 448.00 564.00 383.00 480.00 786.00 726.0084" 620.00 665.00 665.00 665.00 515.00 515.00 379.00 480.00 606.00 410.00 515.00 848.00 761.0096" 647.00 695.00 695.00 695.00 552.00 552.00 406.00 514.00 651.00 438.00 552.00 911.00 794.00
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316S 710SpecialFinishes
1-1/4" Diameter12" 367.00 396.00 396.00 396.00 200.00 200.00 146.00 185.00 241.00 154.00 200.00 346.00 459.0018" 388.00 419.00 419.00 419.00 227.00 227.00 167.00 210.00 273.00 175.00 227.00 393.00 486.0024" 409.00 441.00 441.00 441.00 255.00 255.00 188.00 236.00 307.00 196.00 255.00 440.00 512.0036" 451.00 488.00 488.00 488.00 309.00 309.00 230.00 286.00 372.00 238.00 309.00 535.00 564.0048" 493.00 533.00 533.00 533.00 363.00 363.00 248.00 334.00 435.00 279.00 363.00 627.00 617.0060" 520.00 562.00 562.00 562.00 398.00 398.00 276.00 368.00 478.00 306.00 398.00 688.00 650.0072" 548.00 592.00 592.00 592.00 435.00 435.00 303.00 402.00 522.00 334.00 435.00 752.00 685.0084" 576.00 622.00 622.00 622.00 471.00 471.00 330.00 434.00 564.00 362.00 471.00 813.00 720.0096" 603.00 651.00 651.00 651.00 506.00 506.00 359.00 467.00 607.00 389.00 506.00 875.00 754.0012" 397.00 426.00 426.00 426.00 230.00 230.00 176.00 215.00 271.00 184.00 230.00 376.00 489.0018" 418.00 449.00 449.00 449.00 257.00 257.00 197.00 240.00 303.00 205.00 257.00 423.00 516.0024" 439.00 471.00 471.00 471.00 285.00 285.00 218.00 266.00 337.00 226.00 285.00 470.00 542.0036" 481.00 518.00 518.00 518.00 339.00 339.00 260.00 316.00 402.00 268.00 339.00 565.00 594.0048" 523.00 563.00 563.00 563.00 393.00 393.00 278.00 364.00 465.00 309.00 393.00 657.00 647.0060" 550.00 592.00 592.00 592.00 428.00 428.00 306.00 398.00 508.00 336.00 428.00 718.00 680.0072" 578.00 622.00 622.00 622.00 465.00 465.00 333.00 432.00 552.00 364.00 465.00 782.00 715.0084" 606.00 652.00 652.00 652.00 501.00 501.00 360.00 464.00 594.00 392.00 501.00 843.00 750.0096" 633.00 681.00 681.00 681.00 536.00 536.00 389.00 497.00 637.00 419.00 536.00 905.00 784.0012" 397.00 426.00 426.00 426.00 230.00 230.00 176.00 215.00 271.00 184.00 230.00 376.00 489.0018" 418.00 449.00 449.00 449.00 257.00 257.00 197.00 240.00 303.00 205.00 257.00 423.00 516.0024" 439.00 471.00 471.00 471.00 285.00 285.00 218.00 266.00 337.00 226.00 285.00 470.00 542.0036" 481.00 518.00 518.00 518.00 339.00 339.00 260.00 316.00 402.00 268.00 339.00 565.00 594.0048" 523.00 563.00 563.00 563.00 393.00 393.00 278.00 364.00 465.00 309.00 393.00 657.00 647.0060" 550.00 592.00 592.00 592.00 428.00 428.00 306.00 398.00 508.00 336.00 428.00 718.00 680.0072" 578.00 622.00 622.00 622.00 465.00 465.00 333.00 432.00 552.00 364.00 465.00 782.00 715.0084" 606.00 652.00 652.00 652.00 501.00 501.00 360.00 464.00 594.00 392.00 501.00 843.00 750.0096" 633.00 681.00 681.00 681.00 536.00 536.00 389.00 497.00 637.00 419.00 536.00 905.00 784.00
AP4161" DiameterOffset StandoffsAngled Ends
Specify Handing
AP4211-1/4" DiameterStraight StandoffsSquare Ends
AP4221-1/4" DiameterStraight StandoffsRadius Ends
AP4231-1/4" DiameterOffset StandoffsSquare Ends
AP4151" DiameterStraight StandoffsAngled Ends
9
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP400 SERIES: STANDARD LADDER PULLS (Formerly 1160 & 1170 Series)
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316S 710SpecialFinishes
1-1/4" Diameter12" 427.00 456.00 456.00 456.00 260.00 260.00 206.00 245.00 301.00 214.00 260.00 406.00 519.0018" 448.00 479.00 479.00 479.00 287.00 287.00 227.00 270.00 333.00 235.00 287.00 453.00 546.0024" 469.00 501.00 501.00 501.00 315.00 315.00 248.00 296.00 367.00 256.00 315.00 500.00 572.0036" 511.00 548.00 548.00 548.00 369.00 369.00 290.00 346.00 432.00 298.00 369.00 595.00 624.0048" 553.00 593.00 593.00 593.00 423.00 423.00 308.00 394.00 495.00 339.00 423.00 687.00 677.0060" 580.00 622.00 622.00 622.00 458.00 458.00 336.00 428.00 538.00 366.00 458.00 748.00 710.0072" 608.00 652.00 652.00 652.00 495.00 495.00 363.00 462.00 582.00 394.00 495.00 812.00 745.0084" 636.00 682.00 682.00 682.00 531.00 531.00 390.00 494.00 624.00 422.00 531.00 873.00 780.0096" 663.00 711.00 711.00 711.00 566.00 566.00 419.00 527.00 667.00 449.00 566.00 935.00 814.0012" 397.00 426.00 426.00 426.00 230.00 230.00 176.00 215.00 271.00 184.00 230.00 376.00 489.0018" 418.00 449.00 449.00 449.00 257.00 257.00 197.00 240.00 303.00 205.00 257.00 423.00 516.0024" 439.00 471.00 471.00 471.00 285.00 285.00 218.00 266.00 337.00 226.00 285.00 470.00 542.0036" 481.00 518.00 518.00 518.00 339.00 339.00 260.00 316.00 402.00 268.00 339.00 565.00 594.0048" 523.00 563.00 563.00 563.00 393.00 393.00 278.00 364.00 465.00 309.00 393.00 657.00 647.0060" 550.00 592.00 592.00 592.00 428.00 428.00 306.00 398.00 508.00 336.00 428.00 718.00 680.0072" 578.00 622.00 622.00 622.00 465.00 465.00 333.00 432.00 552.00 364.00 465.00 782.00 715.0084" 606.00 652.00 652.00 652.00 501.00 501.00 360.00 464.00 594.00 392.00 501.00 843.00 750.0096" 633.00 681.00 681.00 681.00 536.00 536.00 389.00 497.00 637.00 419.00 536.00 905.00 784.0012" 427.00 456.00 456.00 456.00 260.00 260.00 206.00 245.00 301.00 214.00 260.00 406.00 519.0018" 448.00 479.00 479.00 479.00 287.00 287.00 227.00 270.00 333.00 235.00 287.00 453.00 546.0024" 469.00 501.00 501.00 501.00 315.00 315.00 248.00 296.00 367.00 256.00 315.00 500.00 572.0036" 511.00 548.00 548.00 548.00 369.00 369.00 290.00 346.00 432.00 298.00 369.00 595.00 624.0048" 553.00 593.00 593.00 593.00 423.00 423.00 308.00 394.00 495.00 339.00 423.00 687.00 677.0060" 580.00 622.00 622.00 622.00 458.00 458.00 336.00 428.00 538.00 366.00 458.00 748.00 710.0072" 608.00 652.00 652.00 652.00 495.00 495.00 363.00 462.00 582.00 394.00 495.00 812.00 745.0084" 636.00 682.00 682.00 682.00 531.00 531.00 390.00 494.00 624.00 422.00 531.00 873.00 780.0096" 663.00 711.00 711.00 711.00 566.00 566.00 419.00 527.00 667.00 449.00 566.00 935.00 814.00
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316S 710SpecialFinishes
1-1/2" Diameter12" 377.00 407.00 407.00 407.00 218.00 218.00 154.00 201.00 262.00 167.00 218.00 376.00 472.0018" 398.00 430.00 430.00 430.00 245.00 245.00 175.00 226.00 294.00 188.00 245.00 424.00 498.0024" 419.00 453.00 453.00 453.00 272.00 272.00 196.00 251.00 327.00 209.00 272.00 471.00 524.0036" 462.00 500.00 500.00 500.00 327.00 327.00 238.00 302.00 393.00 251.00 327.00 565.00 578.0048" 506.00 546.00 546.00 546.00 380.00 380.00 256.00 350.00 455.00 291.00 380.00 656.00 633.0060" 534.00 577.00 577.00 577.00 414.00 414.00 283.00 383.00 498.00 319.00 414.00 717.00 667.0072" 562.00 607.00 607.00 607.00 450.00 450.00 311.00 415.00 540.00 346.00 450.00 779.00 703.0084" 591.00 638.00 638.00 638.00 486.00 486.00 339.00 448.00 582.00 373.00 486.00 839.00 739.0096" 618.00 668.00 668.00 668.00 522.00 522.00 366.00 482.00 627.00 402.00 522.00 903.00 772.0012" 407.00 437.00 437.00 437.00 248.00 248.00 184.00 231.00 292.00 197.00 248.00 406.00 502.0018" 428.00 460.00 460.00 460.00 275.00 275.00 205.00 256.00 324.00 218.00 275.00 454.00 528.0024" 449.00 483.00 483.00 483.00 302.00 302.00 226.00 281.00 357.00 239.00 302.00 501.00 554.0036" 492.00 530.00 530.00 530.00 357.00 357.00 268.00 332.00 423.00 281.00 357.00 595.00 608.0048" 536.00 576.00 576.00 576.00 410.00 410.00 286.00 380.00 485.00 321.00 410.00 686.00 663.0060" 564.00 607.00 607.00 607.00 444.00 444.00 313.00 413.00 528.00 349.00 444.00 747.00 697.0072" 592.00 637.00 637.00 637.00 480.00 480.00 341.00 445.00 570.00 376.00 480.00 809.00 733.0084" 621.00 668.00 668.00 668.00 516.00 516.00 369.00 478.00 612.00 403.00 516.00 869.00 769.0096" 648.00 698.00 698.00 698.00 552.00 552.00 396.00 512.00 657.00 432.00 552.00 933.00 802.00
AP4251-1/4" DiameterStraight StandoffsAngled Ends
AP4261-1/4" DiameterOffset StandoffsAngled Ends
Specify Handing
AP4311-1/2" DiameterStraight StandoffsSquare Ends
AP4321-1/2" DiameterStraight StandoffsRadius Ends
AP4241-1/4" DiameterOffset StandoffsRadius Ends
10
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP400 SERIES: STANDARD LADDER PULLS (Formerly 1160 & 1170 Series)
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316S 710SpecialFinishes
1-1/2" Diameter12" 407.00 437.00 437.00 437.00 248.00 248.00 184.00 231.00 292.00 197.00 248.00 406.00 502.0018" 428.00 460.00 460.00 460.00 275.00 275.00 205.00 256.00 324.00 218.00 275.00 454.00 528.0024" 449.00 483.00 483.00 483.00 302.00 302.00 226.00 281.00 357.00 239.00 302.00 501.00 554.0036" 492.00 530.00 530.00 530.00 357.00 357.00 268.00 332.00 423.00 281.00 357.00 595.00 608.0048" 536.00 576.00 576.00 576.00 410.00 410.00 286.00 380.00 485.00 321.00 410.00 686.00 663.0060" 564.00 607.00 607.00 607.00 444.00 444.00 313.00 413.00 528.00 349.00 444.00 747.00 697.0072" 592.00 637.00 637.00 637.00 480.00 480.00 341.00 445.00 570.00 376.00 480.00 809.00 733.0084" 621.00 668.00 668.00 668.00 516.00 516.00 369.00 478.00 612.00 403.00 516.00 869.00 769.0096" 648.00 698.00 698.00 698.00 552.00 552.00 396.00 512.00 657.00 432.00 552.00 933.00 802.0012" 437.00 467.00 467.00 467.00 278.00 278.00 214.00 261.00 322.00 227.00 278.00 436.00 532.0018" 458.00 490.00 490.00 490.00 305.00 305.00 235.00 286.00 354.00 248.00 305.00 484.00 558.0024" 479.00 513.00 513.00 513.00 332.00 332.00 256.00 311.00 387.00 269.00 332.00 531.00 584.0036" 522.00 560.00 560.00 560.00 387.00 387.00 298.00 362.00 453.00 311.00 387.00 625.00 638.0048" 566.00 606.00 606.00 606.00 440.00 440.00 316.00 410.00 515.00 351.00 440.00 716.00 693.0060" 594.00 637.00 637.00 637.00 474.00 474.00 343.00 443.00 558.00 379.00 474.00 777.00 727.0072" 622.00 667.00 667.00 667.00 510.00 510.00 371.00 475.00 600.00 406.00 510.00 839.00 763.0084" 651.00 698.00 698.00 698.00 546.00 546.00 399.00 508.00 642.00 433.00 546.00 899.00 799.0096" 678.00 728.00 728.00 728.00 582.00 582.00 426.00 542.00 687.00 462.00 582.00 963.00 832.0012" 407.00 437.00 437.00 437.00 248.00 248.00 184.00 231.00 292.00 197.00 248.00 406.00 502.0018" 428.00 460.00 460.00 460.00 275.00 275.00 205.00 256.00 324.00 218.00 275.00 454.00 528.0024" 449.00 483.00 483.00 483.00 302.00 302.00 226.00 281.00 357.00 239.00 302.00 501.00 554.0036" 492.00 530.00 530.00 530.00 357.00 357.00 268.00 332.00 423.00 281.00 357.00 595.00 608.0048" 536.00 576.00 576.00 576.00 410.00 410.00 286.00 380.00 485.00 321.00 410.00 686.00 663.0060" 564.00 607.00 607.00 607.00 444.00 444.00 313.00 413.00 528.00 349.00 444.00 747.00 697.0072" 592.00 637.00 637.00 637.00 480.00 480.00 341.00 445.00 570.00 376.00 480.00 809.00 733.0084" 621.00 668.00 668.00 668.00 516.00 516.00 369.00 478.00 612.00 403.00 516.00 869.00 769.0096" 648.00 698.00 698.00 698.00 552.00 552.00 396.00 512.00 657.00 432.00 552.00 933.00 802.0012" 437.00 467.00 467.00 467.00 278.00 278.00 214.00 261.00 322.00 227.00 278.00 436.00 532.0018" 458.00 490.00 490.00 490.00 305.00 305.00 235.00 286.00 354.00 248.00 305.00 484.00 558.0024" 479.00 513.00 513.00 513.00 332.00 332.00 256.00 311.00 387.00 269.00 332.00 531.00 584.0036" 522.00 560.00 560.00 560.00 387.00 387.00 298.00 362.00 453.00 311.00 387.00 625.00 638.0048" 566.00 606.00 606.00 606.00 440.00 440.00 316.00 410.00 515.00 351.00 440.00 716.00 693.0060" 594.00 637.00 637.00 637.00 474.00 474.00 343.00 443.00 558.00 379.00 474.00 777.00 727.0072" 622.00 667.00 667.00 667.00 510.00 510.00 371.00 475.00 600.00 406.00 510.00 839.00 763.0084" 651.00 698.00 698.00 698.00 546.00 546.00 399.00 508.00 642.00 433.00 546.00 899.00 799.0096" 678.00 728.00 728.00 728.00 582.00 582.00 426.00 542.00 687.00 462.00 582.00 963.00 832.00
AP4341-1/2" DiameterOffset StandoffsRadius Ends
AP4351-1/2" DiameterStraight StandoffsAngled Ends
AP4361-1/2" DiameterOffset StandoffsAngled Ends
Specify Handing
AP4331-1/2" DiameterOffset StandoffsSquare Ends
11
E Standard 25.00G 21.00 No Charge
J 21.00 No Charge
L 84.00 No Charge
M 84.00 No Charge
N 50.00 No Charge
10.0010.0010.00
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinish
1" Diameter12" 322.00 371.00 371.00 371.00 323.00 323.00 231.00 299.00 389.00 248.00 323.00 403.0018" 336.00 385.00 385.00 385.00 339.00 339.00 242.00 312.00 407.00 260.00 339.00 420.0024" 350.00 399.00 399.00 399.00 353.00 353.00 252.00 326.00 424.00 271.00 353.00 438.0036" 363.00 411.00 411.00 411.00 371.00 371.00 266.00 343.00 446.00 285.00 371.00 454.0048" 539.00 588.00 588.00 588.00 486.00 486.00 348.00 448.00 582.00 373.00 486.00 675.0060" 585.00 626.00 626.00 626.00 513.00 513.00 367.00 473.00 615.00 394.00 513.00 732.0072" 630.00 664.00 664.00 664.00 539.00 539.00 386.00 497.00 646.00 414.00 539.00 788.0084" 721.00 762.00 762.00 762.00 574.00 574.00 411.00 530.00 689.00 441.00 574.00 901.0012" 352.00 401.00 401.00 401.00 353.00 353.00 261.00 329.00 419.00 278.00 353.00 433.0018" 366.00 415.00 415.00 415.00 369.00 369.00 272.00 342.00 437.00 290.00 369.00 450.0024" 380.00 429.00 429.00 429.00 383.00 383.00 282.00 356.00 454.00 301.00 383.00 468.0036" 393.00 441.00 441.00 441.00 401.00 401.00 296.00 373.00 476.00 315.00 401.00 484.0048" 569.00 618.00 618.00 618.00 516.00 516.00 378.00 478.00 612.00 403.00 516.00 705.0060" 615.00 656.00 656.00 656.00 543.00 543.00 397.00 503.00 645.00 424.00 543.00 762.0072" 660.00 694.00 694.00 694.00 569.00 569.00 416.00 527.00 676.00 444.00 569.00 818.0084" 751.00 792.00 792.00 792.00 604.00 604.00 441.00 560.00 719.00 471.00 604.00 931.0012" 352.00 401.00 401.00 401.00 353.00 353.00 261.00 329.00 419.00 278.00 353.00 433.0018" 366.00 415.00 415.00 415.00 369.00 369.00 272.00 342.00 437.00 290.00 369.00 450.0024" 380.00 429.00 429.00 429.00 383.00 383.00 282.00 356.00 454.00 301.00 383.00 468.0036" 393.00 441.00 441.00 441.00 401.00 401.00 296.00 373.00 476.00 315.00 401.00 484.0048" 569.00 618.00 618.00 618.00 516.00 516.00 378.00 478.00 612.00 403.00 516.00 705.0060" 615.00 656.00 656.00 656.00 543.00 543.00 397.00 503.00 645.00 424.00 543.00 762.0072" 660.00 694.00 694.00 694.00 569.00 569.00 416.00 527.00 676.00 444.00 569.00 818.0084" 751.00 792.00 792.00 792.00 604.00 604.00 441.00 560.00 719.00 471.00 604.00 931.0012" 382.00 431.00 431.00 431.00 383.00 383.00 291.00 359.00 449.00 308.00 383.00 463.0018" 396.00 445.00 445.00 445.00 399.00 399.00 302.00 372.00 467.00 320.00 399.00 480.0024" 410.00 459.00 459.00 459.00 413.00 413.00 312.00 386.00 484.00 331.00 413.00 498.0036" 423.00 471.00 471.00 471.00 431.00 431.00 326.00 403.00 506.00 345.00 431.00 514.0048" 599.00 648.00 648.00 648.00 546.00 546.00 408.00 508.00 642.00 433.00 546.00 735.0060" 645.00 686.00 686.00 686.00 573.00 573.00 427.00 533.00 675.00 454.00 573.00 792.0072" 690.00 724.00 724.00 724.00 599.00 599.00 446.00 557.00 706.00 474.00 599.00 848.0084" 781.00 822.00 822.00 822.00 634.00 634.00 471.00 590.00 749.00 501.00 634.00 961.00
3 • 1-3/8"2 • 1/2"1 • 3/8"0 • Custom
Door Thickness
8 • 3"7 • 2-1/2"6 • 2-1/4"5 • 2"4 • 1-3/4"
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP500 SERIES: BLACK ANODIZED GRIP PULLS
PRICE ADDERS - LIST PRICE PER PULL
Mounting Types/Pull
AP5111" DiameterStraight StandoffsSquare Ends
AP5121" DiameterStraight StandoffsRadius Ends
AP5131" DiameterOffset StandoffsSquare Ends
AP5141" DiameterOffset StandoffsRadius Ends
609
B
12
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP500 SERIES: BLACK ANODIZED GRIP PULLSB
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinish
1" Diameter12" 352.00 401.00 401.00 401.00 353.00 353.00 261.00 329.00 419.00 278.00 353.00 433.0018" 366.00 415.00 415.00 415.00 369.00 369.00 272.00 342.00 437.00 290.00 369.00 450.0024" 380.00 429.00 429.00 429.00 383.00 383.00 282.00 356.00 454.00 301.00 383.00 468.0036" 393.00 441.00 441.00 441.00 401.00 401.00 296.00 373.00 476.00 315.00 401.00 484.0048" 569.00 618.00 618.00 618.00 516.00 516.00 378.00 478.00 612.00 403.00 516.00 705.0060" 615.00 656.00 656.00 656.00 543.00 543.00 397.00 503.00 645.00 424.00 543.00 762.0072" 660.00 694.00 694.00 694.00 569.00 569.00 416.00 527.00 676.00 444.00 569.00 818.0084" 751.00 792.00 792.00 792.00 604.00 604.00 441.00 560.00 719.00 471.00 604.00 931.0012" 382.00 431.00 431.00 431.00 383.00 383.00 291.00 359.00 449.00 308.00 383.00 463.0018" 396.00 445.00 445.00 445.00 399.00 399.00 302.00 372.00 467.00 320.00 399.00 480.0024" 410.00 459.00 459.00 459.00 413.00 413.00 312.00 386.00 484.00 331.00 413.00 498.0036" 423.00 471.00 471.00 471.00 431.00 431.00 326.00 403.00 506.00 345.00 431.00 514.0048" 599.00 648.00 648.00 648.00 546.00 546.00 408.00 508.00 642.00 433.00 546.00 735.0060" 645.00 686.00 686.00 686.00 573.00 573.00 427.00 533.00 675.00 454.00 573.00 792.0072" 690.00 724.00 724.00 724.00 599.00 599.00 446.00 557.00 706.00 474.00 599.00 848.0084" 781.00 822.00 822.00 822.00 634.00 634.00 471.00 590.00 749.00 501.00 634.00 961.00
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinish
1-1/4" Diameter12" 339.00 387.00 387.00 387.00 331.00 331.00 238.00 306.00 398.00 255.00 331.00 424.0018" 363.00 403.00 403.00 403.00 352.00 352.00 252.00 325.00 423.00 270.00 352.00 454.0024" 387.00 417.00 417.00 417.00 371.00 371.00 266.00 343.00 446.00 285.00 371.00 483.0036" 402.00 433.00 433.00 433.00 390.00 390.00 280.00 360.00 468.00 300.00 390.00 502.0048" 540.00 588.00 588.00 588.00 506.00 506.00 363.00 467.00 607.00 389.00 506.00 676.0060" 570.00 611.00 611.00 611.00 527.00 527.00 377.00 486.00 632.00 405.00 527.00 712.0072" 600.00 633.00 633.00 633.00 545.00 545.00 391.00 503.00 655.00 419.00 545.00 750.0084" 713.00 745.00 745.00 745.00 613.00 613.00 438.00 565.00 735.00 471.00 613.00 892.0012" 369.00 417.00 417.00 417.00 361.00 361.00 268.00 336.00 428.00 285.00 361.00 454.0018" 393.00 433.00 433.00 433.00 382.00 382.00 282.00 355.00 453.00 300.00 382.00 484.0024" 417.00 447.00 447.00 447.00 401.00 401.00 296.00 373.00 476.00 315.00 401.00 513.0036" 432.00 463.00 463.00 463.00 420.00 420.00 310.00 390.00 498.00 330.00 420.00 532.0048" 570.00 618.00 618.00 618.00 536.00 536.00 393.00 497.00 637.00 419.00 536.00 706.0060" 600.00 641.00 641.00 641.00 557.00 557.00 407.00 516.00 662.00 435.00 557.00 742.0072" 630.00 663.00 663.00 663.00 575.00 575.00 421.00 533.00 685.00 449.00 575.00 780.0084" 743.00 775.00 775.00 775.00 643.00 643.00 468.00 595.00 765.00 501.00 643.00 922.0012" 369.00 417.00 417.00 417.00 361.00 361.00 268.00 336.00 428.00 285.00 361.00 454.0018" 393.00 433.00 433.00 433.00 382.00 382.00 282.00 355.00 453.00 300.00 382.00 484.0024" 417.00 447.00 447.00 447.00 401.00 401.00 296.00 373.00 476.00 315.00 401.00 513.0036" 432.00 463.00 463.00 463.00 420.00 420.00 310.00 390.00 498.00 330.00 420.00 532.0048" 570.00 618.00 618.00 618.00 536.00 536.00 393.00 497.00 637.00 419.00 536.00 706.0060" 600.00 641.00 641.00 641.00 557.00 557.00 407.00 516.00 662.00 435.00 557.00 742.0072" 630.00 663.00 663.00 663.00 575.00 575.00 421.00 533.00 685.00 449.00 575.00 780.0084" 743.00 775.00 775.00 775.00 643.00 643.00 468.00 595.00 765.00 501.00 643.00 922.00
AP5161" DiameterOffset StandoffsAngled Ends
Specify Handing
AP5211-1/4" DiameterStraight StandoffsSquare Ends
AP5221-1/4" DiameterStraight StandoffsRadius Ends
AP5231-1/4" DiameterOffset StandoffsSquare Ends
AP5151" DiameterStraight StandoffsAngled Ends
13
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP500 SERIES: BLACK ANODIZED GRIP PULLSB
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinish
1-1/4" Diameter12" 399.00 447.00 447.00 447.00 391.00 391.00 298.00 366.00 458.00 315.00 391.00 484.0018" 423.00 463.00 463.00 463.00 412.00 412.00 312.00 385.00 483.00 330.00 412.00 514.0024" 447.00 477.00 477.00 477.00 431.00 431.00 326.00 403.00 506.00 345.00 431.00 543.0036" 462.00 493.00 493.00 493.00 450.00 450.00 340.00 420.00 528.00 360.00 450.00 562.0048" 600.00 648.00 648.00 648.00 566.00 566.00 423.00 527.00 667.00 449.00 566.00 736.0060" 630.00 671.00 671.00 671.00 587.00 587.00 437.00 546.00 692.00 465.00 587.00 772.0072" 660.00 693.00 693.00 693.00 605.00 605.00 451.00 563.00 715.00 479.00 605.00 810.0084" 773.00 805.00 805.00 805.00 673.00 673.00 498.00 625.00 795.00 531.00 673.00 952.0012" 369.00 417.00 417.00 417.00 361.00 361.00 268.00 336.00 428.00 285.00 361.00 454.0018" 393.00 433.00 433.00 433.00 382.00 382.00 282.00 355.00 453.00 300.00 382.00 484.0024" 417.00 447.00 447.00 447.00 401.00 401.00 296.00 373.00 476.00 315.00 401.00 513.0036" 432.00 463.00 463.00 463.00 420.00 420.00 310.00 390.00 498.00 330.00 420.00 532.0048" 570.00 618.00 618.00 618.00 536.00 536.00 393.00 497.00 637.00 419.00 536.00 706.0060" 600.00 641.00 641.00 641.00 557.00 557.00 407.00 516.00 662.00 435.00 557.00 742.0072" 630.00 663.00 663.00 663.00 575.00 575.00 421.00 533.00 685.00 449.00 575.00 780.0084" 743.00 775.00 775.00 775.00 643.00 643.00 468.00 595.00 765.00 501.00 643.00 922.0012" 399.00 447.00 447.00 447.00 391.00 391.00 298.00 366.00 458.00 315.00 391.00 484.0018" 423.00 463.00 463.00 463.00 412.00 412.00 312.00 385.00 483.00 330.00 412.00 514.0024" 447.00 477.00 477.00 477.00 431.00 431.00 326.00 403.00 506.00 345.00 431.00 543.0036" 462.00 493.00 493.00 493.00 450.00 450.00 340.00 420.00 528.00 360.00 450.00 562.0048" 600.00 648.00 648.00 648.00 566.00 566.00 423.00 527.00 667.00 449.00 566.00 736.0060" 630.00 671.00 671.00 671.00 587.00 587.00 437.00 546.00 692.00 465.00 587.00 772.0072" 660.00 693.00 693.00 693.00 605.00 605.00 451.00 563.00 715.00 479.00 605.00 810.0084" 773.00 805.00 805.00 805.00 673.00 673.00 498.00 625.00 795.00 531.00 673.00 952.00
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinish
1-1/2" Diameter12" 418.00 450.00 450.00 450.00 390.00 390.00 280.00 360.00 468.00 300.00 390.00 523.0018" 443.00 473.00 473.00 473.00 407.00 407.00 291.00 374.00 487.00 312.00 406.00 554.0024" 467.00 497.00 497.00 497.00 422.00 422.00 302.00 389.00 506.00 324.00 422.00 583.0036" 506.00 538.00 538.00 538.00 467.00 467.00 334.00 431.00 560.00 359.00 467.00 633.0048" 576.00 591.00 591.00 591.00 549.00 549.00 392.00 507.00 659.00 422.00 549.00 720.0060" 628.00 645.00 645.00 645.00 587.00 587.00 420.00 542.00 705.00 452.00 587.00 786.0072" 680.00 698.00 698.00 698.00 626.00 626.00 448.00 578.00 751.00 481.00 626.00 850.0084" 780.00 796.00 796.00 796.00 693.00 693.00 496.00 640.00 832.00 533.00 693.00 975.0012" 448.00 480.00 480.00 480.00 420.00 420.00 310.00 390.00 498.00 330.00 420.00 553.0018" 473.00 503.00 503.00 503.00 437.00 437.00 321.00 404.00 517.00 342.00 436.00 584.0024" 497.00 527.00 527.00 527.00 452.00 452.00 332.00 419.00 536.00 354.00 452.00 613.0036" 536.00 568.00 568.00 568.00 497.00 497.00 364.00 461.00 590.00 389.00 497.00 663.0048" 606.00 621.00 621.00 621.00 579.00 579.00 422.00 537.00 689.00 452.00 579.00 750.0060" 658.00 675.00 675.00 675.00 617.00 617.00 450.00 572.00 735.00 482.00 617.00 816.0072" 710.00 728.00 728.00 728.00 656.00 656.00 478.00 608.00 781.00 511.00 656.00 880.0084" 810.00 826.00 826.00 826.00 723.00 723.00 526.00 670.00 862.00 563.00 723.00 1005.00
AP5251-1/4" DiameterStraight StandoffsAngled Ends
AP5261-1/4" DiameterOffset StandoffsAngled Ends
Specify Handing
AP5311-1/2" DiameterStraight StandoffsSquare Ends
AP5321-1/2" DiameterStraight StandoffsRadius Ends
AP5241-1/4" DiameterOffset StandoffsRadius Ends
14
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP500 SERIES: BLACK ANODIZED GRIP PULLSB
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinish
1-1/2" Diameter12" 448.00 480.00 480.00 480.00 420.00 420.00 310.00 390.00 498.00 330.00 420.00 553.0018" 473.00 503.00 503.00 503.00 437.00 437.00 321.00 404.00 517.00 342.00 436.00 584.0024" 497.00 527.00 527.00 527.00 452.00 452.00 332.00 419.00 536.00 354.00 452.00 613.0036" 536.00 568.00 568.00 568.00 497.00 497.00 364.00 461.00 590.00 389.00 497.00 663.0048" 606.00 621.00 621.00 621.00 579.00 579.00 422.00 537.00 689.00 452.00 579.00 750.0060" 658.00 675.00 675.00 675.00 617.00 617.00 450.00 572.00 735.00 482.00 617.00 816.0072" 710.00 728.00 728.00 728.00 656.00 656.00 478.00 608.00 781.00 511.00 656.00 880.0084" 810.00 826.00 826.00 826.00 723.00 723.00 526.00 670.00 862.00 563.00 723.00 1005.0012" 478.00 510.00 510.00 510.00 450.00 450.00 340.00 420.00 528.00 360.00 450.00 583.0018" 503.00 533.00 533.00 533.00 467.00 467.00 351.00 434.00 547.00 372.00 466.00 614.0024" 527.00 557.00 557.00 557.00 482.00 482.00 362.00 449.00 566.00 384.00 482.00 643.0036" 566.00 598.00 598.00 598.00 527.00 527.00 394.00 491.00 620.00 419.00 527.00 693.0048" 636.00 651.00 651.00 651.00 609.00 609.00 452.00 567.00 719.00 482.00 609.00 780.0060" 688.00 705.00 705.00 705.00 647.00 647.00 480.00 602.00 765.00 512.00 647.00 846.0072" 740.00 758.00 758.00 758.00 686.00 686.00 508.00 638.00 811.00 541.00 686.00 910.0084" 840.00 856.00 856.00 856.00 753.00 753.00 556.00 700.00 892.00 593.00 753.00 1035.0012" 448.00 480.00 480.00 480.00 420.00 420.00 310.00 390.00 498.00 330.00 420.00 553.0018" 473.00 503.00 503.00 503.00 437.00 437.00 321.00 404.00 517.00 342.00 436.00 584.0024" 497.00 527.00 527.00 527.00 452.00 452.00 332.00 419.00 536.00 354.00 452.00 613.0036" 536.00 568.00 568.00 568.00 497.00 497.00 364.00 461.00 590.00 389.00 497.00 663.0048" 606.00 621.00 621.00 621.00 579.00 579.00 422.00 537.00 689.00 452.00 579.00 750.0060" 658.00 675.00 675.00 675.00 617.00 617.00 450.00 572.00 735.00 482.00 617.00 816.0072" 710.00 728.00 728.00 728.00 656.00 656.00 478.00 608.00 781.00 511.00 656.00 880.0084" 810.00 826.00 826.00 826.00 723.00 723.00 526.00 670.00 862.00 563.00 723.00 1005.0012" 478.00 510.00 510.00 510.00 450.00 450.00 340.00 420.00 528.00 360.00 450.00 583.0018" 503.00 533.00 533.00 533.00 467.00 467.00 351.00 434.00 547.00 372.00 466.00 614.0024" 527.00 557.00 557.00 557.00 482.00 482.00 362.00 449.00 566.00 384.00 482.00 643.0036" 566.00 598.00 598.00 598.00 527.00 527.00 394.00 491.00 620.00 419.00 527.00 693.0048" 636.00 651.00 651.00 651.00 609.00 609.00 452.00 567.00 719.00 482.00 609.00 780.0060" 688.00 705.00 705.00 705.00 647.00 647.00 480.00 602.00 765.00 512.00 647.00 846.0072" 740.00 758.00 758.00 758.00 686.00 686.00 508.00 638.00 811.00 541.00 686.00 910.0084" 840.00 856.00 856.00 856.00 753.00 753.00 556.00 700.00 892.00 593.00 753.00 1035.00
AP5341-1/2" DiameterOffset StandoffsRadius Ends
AP5351-1/2" DiameterStraight StandoffsAngled Ends
AP5361-1/2" DiameterOffset StandoffsAngled Ends
Specify Handing
AP5331-1/2" DiameterOffset StandoffsSquare Ends
15
E Standard 25.00 P 75.00G 21.00 No Charge
J 21.00 No Charge
L 84.00 No Charge
M 84.00 No Charge B BlackN 50.00 No Charge D Dark Brown
10.00 T Light Brown10.0010.00
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinishes
1" Diameter12" 876.00 905.00 905.00 905.00 710.00 710.00 660.00 696.00 747.00 667.00 710.00 845.0018" 1002.00 1032.00 1032.00 1032.00 843.00 843.00 785.00 826.00 885.00 793.00 843.00 997.0024" 1233.00 1265.00 1265.00 1265.00 1080.00 1080.00 1016.00 1061.00 1127.00 1024.00 1080.00 1254.0036" 1695.00 1731.00 1731.00 1731.00 1554.00 1554.00 1478.00 1531.00 1613.00 1486.00 1554.00 1769.0048" 1737.00 1776.00 1776.00 1776.00 1609.00 1609.00 1496.00 1582.00 1678.00 1528.00 1609.00 1863.0060" 2237.00 2278.00 2278.00 2278.00 2117.00 2117.00 1995.00 2088.00 2195.00 2028.00 2117.00 2398.0072" 2265.00 2308.00 2308.00 2308.00 2153.00 2153.00 2024.00 2120.00 2237.00 2055.00 2153.00 2459.0084" 2555.00 2600.00 2600.00 2600.00 2450.00 2450.00 2314.00 2415.00 2541.00 2345.00 2450.00 2783.0096" 2582.00 2630.00 2630.00 2630.00 2487.00 2487.00 2341.00 2449.00 2586.00 2373.00 2487.00 2846.0012" 906.00 935.00 935.00 935.00 740.00 740.00 690.00 726.00 777.00 697.00 740.00 875.0018" 1032.00 1062.00 1062.00 1062.00 873.00 873.00 815.00 856.00 915.00 823.00 873.00 1027.0024" 1263.00 1295.00 1295.00 1295.00 1110.00 1110.00 1046.00 1091.00 1157.00 1054.00 1110.00 1284.0036" 1725.00 1761.00 1761.00 1761.00 1584.00 1584.00 1508.00 1561.00 1643.00 1516.00 1584.00 1799.0048" 1767.00 1806.00 1806.00 1806.00 1639.00 1639.00 1526.00 1612.00 1708.00 1558.00 1639.00 1893.0060" 2267.00 2308.00 2308.00 2308.00 2147.00 2147.00 2025.00 2118.00 2225.00 2058.00 2147.00 2428.0072" 2295.00 2338.00 2338.00 2338.00 2183.00 2183.00 2054.00 2150.00 2267.00 2085.00 2183.00 2489.0084" 2585.00 2630.00 2630.00 2630.00 2480.00 2480.00 2344.00 2445.00 2571.00 2375.00 2480.00 2813.0096" 2612.00 2660.00 2660.00 2660.00 2517.00 2517.00 2371.00 2479.00 2616.00 2403.00 2517.00 2876.0012" 906.00 935.00 935.00 935.00 740.00 740.00 690.00 726.00 777.00 697.00 740.00 875.0018" 1032.00 1062.00 1062.00 1062.00 873.00 873.00 815.00 856.00 915.00 823.00 873.00 1027.0024" 1263.00 1295.00 1295.00 1295.00 1110.00 1110.00 1046.00 1091.00 1157.00 1054.00 1110.00 1284.0036" 1725.00 1761.00 1761.00 1761.00 1584.00 1584.00 1508.00 1561.00 1643.00 1516.00 1584.00 1799.0048" 1767.00 1806.00 1806.00 1806.00 1639.00 1639.00 1526.00 1612.00 1708.00 1558.00 1639.00 1893.0060" 2267.00 2308.00 2308.00 2308.00 2147.00 2147.00 2025.00 2118.00 2225.00 2058.00 2147.00 2428.0072" 2295.00 2338.00 2338.00 2338.00 2183.00 2183.00 2054.00 2150.00 2267.00 2085.00 2183.00 2489.0084" 2585.00 2630.00 2630.00 2630.00 2480.00 2480.00 2344.00 2445.00 2571.00 2375.00 2480.00 2813.0096" 2612.00 2660.00 2660.00 2660.00 2517.00 2517.00 2371.00 2479.00 2616.00 2403.00 2517.00 2876.0012" 936.00 965.00 965.00 965.00 770.00 770.00 720.00 756.00 807.00 727.00 770.00 905.0018" 1062.00 1092.00 1092.00 1092.00 903.00 903.00 845.00 886.00 945.00 853.00 903.00 1057.0024" 1293.00 1325.00 1325.00 1325.00 1140.00 1140.00 1076.00 1121.00 1187.00 1084.00 1140.00 1314.0036" 1755.00 1791.00 1791.00 1791.00 1614.00 1614.00 1538.00 1591.00 1673.00 1546.00 1614.00 1829.0048" 1797.00 1836.00 1836.00 1836.00 1669.00 1669.00 1556.00 1642.00 1738.00 1588.00 1669.00 1923.0060" 2297.00 2338.00 2338.00 2338.00 2177.00 2177.00 2055.00 2148.00 2255.00 2088.00 2177.00 2458.0072" 2325.00 2368.00 2368.00 2368.00 2213.00 2213.00 2084.00 2180.00 2297.00 2115.00 2213.00 2519.0084" 2615.00 2660.00 2660.00 2660.00 2510.00 2510.00 2374.00 2475.00 2601.00 2405.00 2510.00 2843.0096" 2642.00 2690.00 2690.00 2690.00 2547.00 2547.00 2401.00 2509.00 2646.00 2433.00 2547.00 2906.00
6 • 2-1/4"7 • 2-1/2"8 • 3"
AP6111" DiameterStraight StandoffsSquare EndsLeather Wrapped
AP6121" DiameterStraight StandoffsRadius EndsLeather Wrapped
AP6131" DiameterOffset StandoffsSquare EndsLeather Wrapped
AP6141" DiameterOffset StandoffsRadius EndsLeather Wrapped
5 • 2"
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP600 SERIES: LEATHER WRAPPED LADDER PULLS
PRICE ADDERS - LIST PRICE PER PULL
Mounting Types/Pull Door Thickness MidPost
Leather WrappedAll Colors
Same Price
0 • Custom1 • 3/8"2 • 1/2"3 • 1-3/8"4 • 1-3/4"
16
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP600 SERIES: LEATHER WRAPPED LADDER PULLS
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinishes
1" Diameter12" 906.00 935.00 935.00 935.00 740.00 740.00 690.00 726.00 777.00 697.00 740.00 875.0018" 1032.00 1062.00 1062.00 1062.00 873.00 873.00 815.00 856.00 915.00 823.00 873.00 1027.0024" 1263.00 1295.00 1295.00 1295.00 1110.00 1110.00 1046.00 1091.00 1157.00 1054.00 1110.00 1284.0036" 1725.00 1761.00 1761.00 1761.00 1584.00 1584.00 1508.00 1561.00 1643.00 1516.00 1584.00 1799.0048" 1767.00 1806.00 1806.00 1806.00 1639.00 1639.00 1526.00 1612.00 1708.00 1558.00 1639.00 1893.0060" 2267.00 2308.00 2308.00 2308.00 2147.00 2147.00 2025.00 2118.00 2225.00 2058.00 2147.00 2428.0072" 2295.00 2338.00 2338.00 2338.00 2183.00 2183.00 2054.00 2150.00 2267.00 2085.00 2183.00 2489.0084" 2585.00 2630.00 2630.00 2630.00 2480.00 2480.00 2344.00 2445.00 2571.00 2375.00 2480.00 2813.0096" 2612.00 2660.00 2660.00 2660.00 2517.00 2517.00 2371.00 2479.00 2616.00 2403.00 2517.00 2876.0012" 936.00 965.00 965.00 965.00 770.00 770.00 720.00 756.00 807.00 727.00 770.00 905.0018" 1062.00 1092.00 1092.00 1092.00 903.00 903.00 845.00 886.00 945.00 853.00 903.00 1057.0024" 1293.00 1325.00 1325.00 1325.00 1140.00 1140.00 1076.00 1121.00 1187.00 1084.00 1140.00 1314.0036" 1755.00 1791.00 1791.00 1791.00 1614.00 1614.00 1538.00 1591.00 1673.00 1546.00 1614.00 1829.0048" 1797.00 1836.00 1836.00 1836.00 1669.00 1669.00 1556.00 1642.00 1738.00 1588.00 1669.00 1923.0060" 2297.00 2338.00 2338.00 2338.00 2177.00 2177.00 2055.00 2148.00 2255.00 2088.00 2177.00 2458.0072" 2325.00 2368.00 2368.00 2368.00 2213.00 2213.00 2084.00 2180.00 2297.00 2115.00 2213.00 2519.0084" 2615.00 2660.00 2660.00 2660.00 2510.00 2510.00 2374.00 2475.00 2601.00 2405.00 2510.00 2843.0096" 2642.00 2690.00 2690.00 2690.00 2547.00 2547.00 2401.00 2509.00 2646.00 2433.00 2547.00 2906.00
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinishes
1-1/4" Diameter12" 892.00 921.00 921.00 921.00 725.00 725.00 671.00 710.00 766.00 679.00 725.00 871.0018" 1018.00 1049.00 1049.00 1049.00 857.00 857.00 797.00 840.00 903.00 805.00 857.00 1023.0024" 1249.00 1281.00 1281.00 1281.00 1095.00 1095.00 1028.00 1076.00 1147.00 1036.00 1095.00 1280.0036" 1763.00 1800.00 1800.00 1800.00 1622.00 1622.00 1543.00 1599.00 1685.00 1550.00 1622.00 1847.0048" 2015.00 2055.00 2055.00 2055.00 1885.00 1885.00 1771.00 1857.00 1958.00 1801.00 1885.00 2150.0060" 2253.00 2295.00 2295.00 2295.00 2131.00 2131.00 2008.00 2100.00 2211.00 2039.00 2131.00 2421.0072" 2438.00 2482.00 2482.00 2482.00 2325.00 2325.00 2193.00 2292.00 2412.00 2224.00 2325.00 2642.0084" 2623.00 2670.00 2670.00 2670.00 2518.00 2518.00 2378.00 2482.00 2612.00 2409.00 2518.00 2861.0096" 2808.00 2856.00 2856.00 2856.00 2711.00 2711.00 2564.00 2672.00 2812.00 2594.00 2711.00 3080.0012" 922.00 951.00 951.00 951.00 755.00 755.00 701.00 740.00 796.00 709.00 755.00 901.0018" 1048.00 1079.00 1079.00 1079.00 887.00 887.00 827.00 870.00 933.00 835.00 887.00 1053.0024" 1279.00 1311.00 1311.00 1311.00 1125.00 1125.00 1058.00 1106.00 1177.00 1066.00 1125.00 1310.0036" 1793.00 1830.00 1830.00 1830.00 1652.00 1652.00 1573.00 1629.00 1715.00 1580.00 1652.00 1877.0048" 2045.00 2085.00 2085.00 2085.00 1915.00 1915.00 1801.00 1887.00 1988.00 1831.00 1915.00 2180.0060" 2283.00 2325.00 2325.00 2325.00 2161.00 2161.00 2038.00 2130.00 2241.00 2069.00 2161.00 2451.0072" 2468.00 2512.00 2512.00 2512.00 2355.00 2355.00 2223.00 2322.00 2442.00 2254.00 2355.00 2672.0084" 2653.00 2700.00 2700.00 2700.00 2548.00 2548.00 2408.00 2512.00 2642.00 2439.00 2548.00 2891.0096" 2838.00 2886.00 2886.00 2886.00 2741.00 2741.00 2594.00 2702.00 2842.00 2624.00 2741.00 3110.0012" 922.00 951.00 951.00 951.00 755.00 755.00 701.00 740.00 796.00 709.00 755.00 901.0018" 1048.00 1079.00 1079.00 1079.00 887.00 887.00 827.00 870.00 933.00 835.00 887.00 1053.0024" 1279.00 1311.00 1311.00 1311.00 1125.00 1125.00 1058.00 1106.00 1177.00 1066.00 1125.00 1310.0036" 1793.00 1830.00 1830.00 1830.00 1652.00 1652.00 1573.00 1629.00 1715.00 1580.00 1652.00 1877.0048" 2045.00 2085.00 2085.00 2085.00 1915.00 1915.00 1801.00 1887.00 1988.00 1831.00 1915.00 2180.0060" 2283.00 2325.00 2325.00 2325.00 2161.00 2161.00 2038.00 2130.00 2241.00 2069.00 2161.00 2451.0072" 2468.00 2512.00 2512.00 2512.00 2355.00 2355.00 2223.00 2322.00 2442.00 2254.00 2355.00 2672.0084" 2653.00 2700.00 2700.00 2700.00 2548.00 2548.00 2408.00 2512.00 2642.00 2439.00 2548.00 2891.0096" 2838.00 2886.00 2886.00 2886.00 2741.00 2741.00 2594.00 2702.00 2842.00 2624.00 2741.00 3110.00
AP6161" DiameterOffset StandoffsAngled EndsLeather Wrapped
Specify Handing
AP6211-1/4" DiameterStraight StandoffsSquare EndsLeather Wrapped
AP6221-1/4" DiameterStraight StandoffsRadius EndsLeather Wrapped
AP6231-1/4" DiameterOffset StandoffsSquare EndsLeather Wrapped
AP6151" DiameterStraight StandoffsAngled EndsLeather Wrapped
613E611111 316P316111 316S31611116222222222
17
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP600 SERIES: LEATHER WRAPPED LADDER PULLS
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinishes
1-1/4" Diameter12" 952.00 981.00 981.00 981.00 785.00 785.00 731.00 770.00 826.00 739.00 785.00 931.0018" 1078.00 1109.00 1109.00 1109.00 917.00 917.00 857.00 900.00 963.00 865.00 917.00 1083.0024" 1309.00 1341.00 1341.00 1341.00 1155.00 1155.00 1088.00 1136.00 1207.00 1096.00 1155.00 1340.0036" 1823.00 1860.00 1860.00 1860.00 1682.00 1682.00 1603.00 1659.00 1745.00 1610.00 1682.00 1907.0048" 2075.00 2115.00 2115.00 2115.00 1945.00 1945.00 1831.00 1917.00 2018.00 1861.00 1945.00 2210.0060" 2313.00 2355.00 2355.00 2355.00 2191.00 2191.00 2068.00 2160.00 2271.00 2099.00 2191.00 2481.0072" 2498.00 2542.00 2542.00 2542.00 2385.00 2385.00 2253.00 2352.00 2472.00 2284.00 2385.00 2702.0084" 2683.00 2730.00 2730.00 2730.00 2578.00 2578.00 2438.00 2542.00 2672.00 2469.00 2578.00 2921.0096" 2868.00 2916.00 2916.00 2916.00 2771.00 2771.00 2624.00 2732.00 2872.00 2654.00 2771.00 3140.0012" 922.00 951.00 951.00 951.00 755.00 755.00 701.00 740.00 796.00 709.00 755.00 901.0018" 1048.00 1079.00 1079.00 1079.00 887.00 887.00 827.00 870.00 933.00 835.00 887.00 1053.0024" 1279.00 1311.00 1311.00 1311.00 1125.00 1125.00 1058.00 1106.00 1177.00 1066.00 1125.00 1310.0036" 1793.00 1830.00 1830.00 1830.00 1652.00 1652.00 1573.00 1629.00 1715.00 1580.00 1652.00 1877.0048" 2045.00 2085.00 2085.00 2085.00 1915.00 1915.00 1801.00 1887.00 1988.00 1831.00 1915.00 2180.0060" 2283.00 2325.00 2325.00 2325.00 2161.00 2161.00 2038.00 2130.00 2241.00 2069.00 2161.00 2451.0072" 2468.00 2512.00 2512.00 2512.00 2355.00 2355.00 2223.00 2322.00 2442.00 2254.00 2355.00 2672.0084" 2653.00 2700.00 2700.00 2700.00 2548.00 2548.00 2408.00 2512.00 2642.00 2439.00 2548.00 2891.0096" 2838.00 2886.00 2886.00 2886.00 2741.00 2741.00 2594.00 2702.00 2842.00 2624.00 2741.00 3110.0012" 952.00 981.00 981.00 981.00 785.00 785.00 731.00 770.00 826.00 739.00 785.00 931.0018" 1078.00 1109.00 1109.00 1109.00 917.00 917.00 857.00 900.00 963.00 865.00 917.00 1083.0024" 1309.00 1341.00 1341.00 1341.00 1155.00 1155.00 1088.00 1136.00 1207.00 1096.00 1155.00 1340.0036" 1823.00 1860.00 1860.00 1860.00 1682.00 1682.00 1603.00 1659.00 1745.00 1610.00 1682.00 1907.0048" 2075.00 2115.00 2115.00 2115.00 1945.00 1945.00 1831.00 1917.00 2018.00 1861.00 1945.00 2210.0060" 2313.00 2355.00 2355.00 2355.00 2191.00 2191.00 2068.00 2160.00 2271.00 2099.00 2191.00 2481.0072" 2498.00 2542.00 2542.00 2542.00 2385.00 2385.00 2253.00 2352.00 2472.00 2284.00 2385.00 2702.0084" 2683.00 2730.00 2730.00 2730.00 2578.00 2578.00 2438.00 2542.00 2672.00 2469.00 2578.00 2921.0096" 2868.00 2916.00 2916.00 2916.00 2771.00 2771.00 2624.00 2732.00 2872.00 2654.00 2771.00 3140.00
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinishes
1-1/2" Diameter12" 902.00 932.00 932.00 932.00 743.00 743.00 679.00 726.00 787.00 692.00 743.00 901.0018" 1028.00 1060.00 1060.00 1060.00 875.00 875.00 805.00 856.00 924.00 818.00 875.00 1054.0024" 1259.00 1293.00 1293.00 1293.00 1112.00 1112.00 1036.00 1091.00 1167.00 1049.00 1112.00 1311.0036" 1775.00 1813.00 1813.00 1813.00 1640.00 1640.00 1550.00 1614.00 1706.00 1564.00 1640.00 1878.0048" 2028.00 2069.00 2069.00 2069.00 1902.00 1902.00 1778.00 1873.00 1978.00 1814.00 1902.00 2178.0060" 2266.00 2309.00 2309.00 2309.00 2147.00 2147.00 2015.00 2115.00 2231.00 2051.00 2147.00 2449.0072" 2452.00 2497.00 2497.00 2497.00 2340.00 2340.00 2201.00 2305.00 2430.00 2236.00 2340.00 2669.0084" 2638.00 2685.00 2685.00 2685.00 2533.00 2533.00 2386.00 2495.00 2630.00 2421.00 2533.00 2887.0096" 2823.00 2873.00 2873.00 2873.00 2727.00 2727.00 2571.00 2687.00 2832.00 2607.00 2727.00 3108.0012" 932.00 962.00 962.00 962.00 773.00 773.00 709.00 756.00 817.00 722.00 773.00 931.0018" 1058.00 1090.00 1090.00 1090.00 905.00 905.00 835.00 886.00 954.00 848.00 905.00 1084.0024" 1289.00 1323.00 1323.00 1323.00 1142.00 1142.00 1066.00 1121.00 1197.00 1079.00 1142.00 1341.0036" 1805.00 1843.00 1843.00 1843.00 1670.00 1670.00 1580.00 1644.00 1736.00 1594.00 1670.00 1908.0048" 2058.00 2099.00 2099.00 2099.00 1932.00 1932.00 1808.00 1903.00 2008.00 1844.00 1932.00 2208.0060" 2296.00 2339.00 2339.00 2339.00 2177.00 2177.00 2045.00 2145.00 2261.00 2081.00 2177.00 2479.0072" 2482.00 2527.00 2527.00 2527.00 2370.00 2370.00 2231.00 2335.00 2460.00 2266.00 2370.00 2699.0084" 2668.00 2715.00 2715.00 2715.00 2563.00 2563.00 2416.00 2525.00 2660.00 2451.00 2563.00 2917.0096" 2853.00 2903.00 2903.00 2903.00 2757.00 2757.00 2601.00 2717.00 2862.00 2637.00 2757.00 3138.00
AP6251-1/4" DiameterStraight StandoffsAngled EndsLeather Wrapped
AP6261-1/4" DiameterOffset StandoffsAngled EndsLeather Wrapped
Specify Handing
AP6241-1/4" DiameterOffset StandoffsRadius EndsLeather Wrapped
AP6311-1/2" DiameterStraight StandoffsSquare EndsLeather Wrapped
AP6321-1/2" DiameterStraight StandoffsRadius EndsLeather Wrapped
613E611111 316P16111 316S31611116222222222
18
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
AP600 SERIES: LEATHER WRAPPED LADDER PULLS
Family OA Size 605/606 609 611/612 613 613E 622 628 629 316P 630 316SSpecialFinishes
1-1/2" Diameter12" 932.00 962.00 962.00 962.00 773.00 773.00 709.00 756.00 817.00 722.00 773.00 931.0018" 1058.00 1090.00 1090.00 1090.00 905.00 905.00 835.00 886.00 954.00 848.00 905.00 1084.0024" 1289.00 1323.00 1323.00 1323.00 1142.00 1142.00 1066.00 1121.00 1197.00 1079.00 1142.00 1341.0036" 1805.00 1843.00 1843.00 1843.00 1670.00 1670.00 1580.00 1644.00 1736.00 1594.00 1670.00 1908.0048" 2058.00 2099.00 2099.00 2099.00 1932.00 1932.00 1808.00 1903.00 2008.00 1844.00 1932.00 2208.0060" 2296.00 2339.00 2339.00 2339.00 2177.00 2177.00 2045.00 2145.00 2261.00 2081.00 2177.00 2479.0072" 2482.00 2527.00 2527.00 2527.00 2370.00 2370.00 2231.00 2335.00 2460.00 2266.00 2370.00 2699.0084" 2668.00 2715.00 2715.00 2715.00 2563.00 2563.00 2416.00 2525.00 2660.00 2451.00 2563.00 2917.0096" 2853.00 2903.00 2903.00 2903.00 2757.00 2757.00 2601.00 2717.00 2862.00 2637.00 2757.00 3138.0012" 962.00 992.00 992.00 992.00 803.00 803.00 739.00 786.00 847.00 752.00 803.00 961.0018" 1088.00 1120.00 1120.00 1120.00 935.00 935.00 865.00 916.00 984.00 878.00 935.00 1114.0024" 1319.00 1353.00 1353.00 1353.00 1172.00 1172.00 1096.00 1151.00 1227.00 1109.00 1172.00 1371.0036" 1835.00 1873.00 1873.00 1873.00 1700.00 1700.00 1610.00 1674.00 1766.00 1624.00 1700.00 1938.0048" 2088.00 2129.00 2129.00 2129.00 1962.00 1962.00 1838.00 1933.00 2038.00 1874.00 1962.00 2238.0060" 2326.00 2369.00 2369.00 2369.00 2207.00 2207.00 2075.00 2175.00 2291.00 2111.00 2207.00 2509.0072" 2512.00 2557.00 2557.00 2557.00 2400.00 2400.00 2261.00 2365.00 2490.00 2296.00 2400.00 2729.0084" 2698.00 2745.00 2745.00 2745.00 2593.00 2593.00 2446.00 2555.00 2690.00 2481.00 2593.00 2947.0096" 2883.00 2933.00 2933.00 2933.00 2787.00 2787.00 2631.00 2747.00 2892.00 2667.00 2787.00 3168.0012" 932.00 962.00 962.00 962.00 773.00 773.00 709.00 756.00 817.00 722.00 773.00 931.0018" 1058.00 1090.00 1090.00 1090.00 905.00 905.00 835.00 886.00 954.00 848.00 905.00 1084.0024" 1289.00 1323.00 1323.00 1323.00 1142.00 1142.00 1066.00 1121.00 1197.00 1079.00 1142.00 1341.0036" 1805.00 1843.00 1843.00 1843.00 1670.00 1670.00 1580.00 1644.00 1736.00 1594.00 1670.00 1908.0048" 2058.00 2099.00 2099.00 2099.00 1932.00 1932.00 1808.00 1903.00 2008.00 1844.00 1932.00 2208.0060" 2296.00 2339.00 2339.00 2339.00 2177.00 2177.00 2045.00 2145.00 2261.00 2081.00 2177.00 2479.0072" 2482.00 2527.00 2527.00 2527.00 2370.00 2370.00 2231.00 2335.00 2460.00 2266.00 2370.00 2699.0084" 2668.00 2715.00 2715.00 2715.00 2563.00 2563.00 2416.00 2525.00 2660.00 2451.00 2563.00 2917.0096" 2853.00 2903.00 2903.00 2903.00 2757.00 2757.00 2601.00 2717.00 2862.00 2637.00 2757.00 3138.0012" 962.00 992.00 992.00 992.00 803.00 803.00 739.00 786.00 847.00 752.00 803.00 961.0018" 1088.00 1120.00 1120.00 1120.00 935.00 935.00 865.00 916.00 984.00 878.00 935.00 1114.0024" 1319.00 1353.00 1353.00 1353.00 1172.00 1172.00 1096.00 1151.00 1227.00 1109.00 1172.00 1371.0036" 1835.00 1873.00 1873.00 1873.00 1700.00 1700.00 1610.00 1674.00 1766.00 1624.00 1700.00 1938.0048" 2088.00 2129.00 2129.00 2129.00 1962.00 1962.00 1838.00 1933.00 2038.00 1874.00 1962.00 2238.0060" 2326.00 2369.00 2369.00 2369.00 2207.00 2207.00 2075.00 2175.00 2291.00 2111.00 2207.00 2509.0072" 2512.00 2557.00 2557.00 2557.00 2400.00 2400.00 2261.00 2365.00 2490.00 2296.00 2400.00 2729.0084" 2698.00 2745.00 2745.00 2745.00 2593.00 2593.00 2446.00 2555.00 2690.00 2481.00 2593.00 2947.0096" 2883.00 2933.00 2933.00 2933.00 2787.00 2787.00 2631.00 2747.00 2892.00 2667.00 2787.00 3168.00
AP6361-1/2" DiameterOffset StandoffsAngled EndsLeather Wrapped
Specify Handing
AP6341-1/2" DiameterOffset StandoffsRadius EndsLeather Wrapped
AP6351-1/2" DiameterStraight StandoffsAngled EndsLeather Wrapped
AP6331-1/2" DiameterOffset StandoffsSquare EndsLeather Wrapped
19
AP700 SERIES: SQUARE & RECTANGULAR PULLS
E Standard 25.00 P 75.00G 21.00 No Charge
J 21.00 No Charge
L 84.00 No Charge
M 84.00 No Charge
N 50.00 No Charge
10.0010.0010.00
Family OA Size 605/606 609 611/612 613 613E 622 628 629 630Special
Finishes3/4" x 3/4" Square
12" 457.00 457.00 457.00 457.00 366.00 366.00 250.00 308.00 276.00 549.0018" 487.00 487.00 487.00 487.00 389.00 389.00 271.00 334.00 299.00 584.0024" 515.00 515.00 515.00 515.00 412.00 412.00 291.00 360.00 321.00 618.0036" 573.00 573.00 573.00 573.00 458.00 458.00 333.00 412.00 368.00 687.0048" 630.00 630.00 630.00 630.00 504.00 504.00 374.00 462.00 413.00 756.0060" 785.00 785.00 785.00 785.00 627.00 627.00 486.00 585.00 536.00 942.0012" 351.00 351.00 351.00 351.00 281.00 281.00 203.00 249.00 224.00 422.0018" 403.00 403.00 403.00 403.00 322.00 322.00 224.00 276.00 247.00 483.0024" 452.00 452.00 452.00 452.00 362.00 362.00 245.00 302.00 270.00 542.0036" 512.00 512.00 512.00 512.00 409.00 409.00 288.00 355.00 318.00 615.0048" 571.00 571.00 571.00 571.00 456.00 456.00 331.00 409.00 365.00 685.0060" 724.00 724.00 724.00 724.00 579.00 579.00 441.00 532.00 488.00 869.00
1" x 1" Square12" 516.00 516.00 516.00 516.00 413.00 413.00 278.00 343.00 305.00 620.0018" 537.00 537.00 537.00 537.00 429.00 429.00 300.00 370.00 330.00 645.0024" 557.00 557.00 557.00 557.00 446.00 446.00 322.00 397.00 354.00 668.0036" 619.00 619.00 619.00 619.00 495.00 495.00 367.00 453.00 405.00 743.0048" 679.00 679.00 679.00 679.00 543.00 543.00 410.00 506.00 453.00 815.0060" 834.00 834.00 834.00 834.00 666.00 666.00 521.00 628.00 576.00 1001.0012" 410.00 410.00 410.00 410.00 328.00 328.00 230.00 284.00 254.00 492.0018" 453.00 453.00 453.00 453.00 362.00 362.00 252.00 311.00 279.00 544.0024" 494.00 494.00 494.00 494.00 395.00 395.00 276.00 340.00 304.00 593.0036" 558.00 558.00 558.00 558.00 446.00 446.00 322.00 396.00 354.00 670.0048" 619.00 619.00 619.00 619.00 495.00 495.00 367.00 452.00 405.00 743.0060" 773.00 773.00 773.00 773.00 618.00 618.00 477.00 575.00 528.00 929.00
1-1/4" x 1-1/4" Square12" 574.00 574.00 574.00 574.00 459.00 459.00 304.00 376.00 334.00 689.0018" 586.00 586.00 586.00 586.00 469.00 469.00 328.00 406.00 362.00 704.0024" 598.00 598.00 598.00 598.00 478.00 478.00 351.00 434.00 387.00 718.0036" 664.00 664.00 664.00 664.00 532.00 532.00 399.00 494.00 441.00 797.0048" 727.00 727.00 727.00 727.00 582.00 582.00 445.00 549.00 492.00 873.0060" 882.00 882.00 882.00 882.00 705.00 705.00 557.00 671.00 615.00 1059.0012" 468.00 468.00 468.00 468.00 374.00 374.00 257.00 318.00 283.00 561.0018" 502.00 502.00 502.00 502.00 402.00 402.00 281.00 347.00 310.00 603.0024" 535.00 535.00 535.00 535.00 428.00 428.00 305.00 376.00 336.00 642.0036" 603.00 603.00 603.00 603.00 482.00 482.00 354.00 437.00 391.00 724.0048" 667.00 667.00 667.00 667.00 534.00 534.00 402.00 495.00 444.00 801.0060" 822.00 822.00 822.00 822.00 657.00 657.00 513.00 618.00 566.00 986.00
2 • 1/2"1 • 3/8"0 • Custom
Door Thickness
7 • 2-1/2"6 • 2-1/4"5 • 2"4 • 1-3/4"3 • 1-3/8"
8 • 3"
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
PRICE ADDERS - LIST PRICE PER PULL
Mounting Types/Pull MidPost
AP7113/4" SquareBridge Posts
AP7123/4" SquareEnd Posts
AP7211" SquareBridge Posts
AP7221" SquareEnd Posts
AP7311-1/4" SquareBridge Posts
AP7321-1/4" SquareEnd Posts
AP712Square PullEnd Posts
AP764Rectangular PullEnd Posts
AP763Rectangular PullBridge Posts
AP712Square PullEnd Posts
20
AP700 SERIES: SQUARE & RECTANGULAR PULLS
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
Family OA Size 605/606 609 611/612 613 613E 622 628 629 630Special
Finishes1/2" x 1-1/4" Rectangular Notes: (F) Face, (D) Depth
12" 446.00 446.00 446.00 446.00 356.00 356.00 249.00 306.00 275.00 535.0018" 565.00 565.00 565.00 565.00 452.00 452.00 325.00 403.00 359.00 679.0024" 684.00 684.00 684.00 684.00 546.00 546.00 403.00 497.00 444.00 822.0036" 895.00 895.00 895.00 895.00 716.00 716.00 555.00 687.00 614.00 1075.0048" 1107.00 1107.00 1107.00 1107.00 886.00 886.00 709.00 877.00 784.00 1329.0060" 1244.00 1244.00 1244.00 1244.00 995.00 995.00 809.00 986.00 894.00 1493.0012" 392.00 392.00 392.00 392.00 313.00 313.00 208.00 258.00 230.00 471.0018" 497.00 497.00 497.00 497.00 397.00 397.00 286.00 353.00 315.00 597.0024" 603.00 603.00 603.00 603.00 482.00 482.00 363.00 448.00 401.00 725.0036" 842.00 842.00 842.00 842.00 672.00 672.00 517.00 639.00 571.00 1010.0048" 1049.00 1049.00 1049.00 1049.00 839.00 839.00 671.00 924.00 741.00 1260.0060" 1187.00 1187.00 1187.00 1187.00 949.00 949.00 770.00 1035.00 850.00 1424.0012" 446.00 446.00 446.00 446.00 356.00 356.00 249.00 306.00 275.00 535.0018" 565.00 565.00 565.00 565.00 452.00 452.00 325.00 403.00 359.00 679.0024" 684.00 684.00 684.00 684.00 546.00 546.00 403.00 497.00 444.00 822.0036" 895.00 895.00 895.00 895.00 716.00 716.00 555.00 687.00 614.00 1075.0048" 1107.00 1107.00 1107.00 1107.00 886.00 886.00 709.00 877.00 784.00 1329.0060" 1244.00 1244.00 1244.00 1244.00 995.00 995.00 809.00 986.00 894.00 1493.0012" 392.00 392.00 392.00 392.00 313.00 313.00 208.00 258.00 230.00 471.0018" 497.00 497.00 497.00 497.00 397.00 397.00 286.00 353.00 315.00 597.0024" 603.00 603.00 603.00 603.00 482.00 482.00 363.00 448.00 401.00 725.0036" 842.00 842.00 842.00 842.00 672.00 672.00 517.00 639.00 571.00 1010.0048" 1049.00 1049.00 1049.00 1049.00 839.00 839.00 671.00 924.00 741.00 1260.0060" 1187.00 1187.00 1187.00 1187.00 949.00 949.00 770.00 1035.00 850.00 1424.00
1" x 1-1/2" RectangularNotes: (F) Face, (D) Depth
12" 498.00 498.00 498.00 498.00 398.00 398.00 279.00 343.00 307.00 598.0018" 633.00 633.00 633.00 633.00 506.00 506.00 364.00 450.00 402.00 760.0024" 765.00 765.00 765.00 765.00 612.00 612.00 450.00 556.00 496.00 918.0036" 1001.00 1001.00 1001.00 1001.00 801.00 801.00 621.00 768.00 686.00 1202.0048" 1237.00 1237.00 1237.00 1237.00 990.00 990.00 793.00 980.00 876.00 1485.0060" 1391.00 1391.00 1391.00 1391.00 1112.00 1112.00 905.00 1103.00 999.00 1669.0012" 438.00 438.00 438.00 438.00 350.00 350.00 234.00 288.00 258.00 527.0018" 556.00 556.00 556.00 556.00 445.00 445.00 321.00 395.00 353.00 667.0024" 675.00 675.00 675.00 675.00 539.00 539.00 406.00 501.00 448.00 810.0036" 940.00 940.00 940.00 940.00 752.00 752.00 578.00 714.00 638.00 1128.0048" 1173.00 1173.00 1173.00 1173.00 938.00 938.00 750.00 1034.00 828.00 1409.0060" 1327.00 1327.00 1327.00 1327.00 1061.00 1061.00 861.00 1157.00 951.00 1592.0012" 498.00 498.00 498.00 498.00 398.00 398.00 279.00 343.00 307.00 598.0018" 633.00 633.00 633.00 633.00 506.00 506.00 364.00 450.00 402.00 760.0024" 765.00 765.00 765.00 765.00 612.00 612.00 450.00 556.00 496.00 918.0036" 1001.00 1001.00 1001.00 1001.00 801.00 801.00 621.00 768.00 686.00 1202.0048" 1237.00 1237.00 1237.00 1237.00 990.00 990.00 793.00 980.00 876.00 1485.0060" 1391.00 1391.00 1391.00 1391.00 1112.00 1112.00 905.00 1103.00 999.00 1669.0012" 438.00 438.00 438.00 438.00 350.00 350.00 234.00 288.00 258.00 527.0018" 556.00 556.00 556.00 556.00 445.00 445.00 321.00 395.00 353.00 667.0024" 675.00 675.00 675.00 675.00 539.00 539.00 406.00 501.00 448.00 810.0036" 940.00 940.00 940.00 940.00 752.00 752.00 578.00 714.00 638.00 1128.0048" 1173.00 1173.00 1173.00 1173.00 938.00 938.00 750.00 1034.00 828.00 1409.0060" 1327.00 1327.00 1327.00 1327.00 1061.00 1061.00 861.00 1157.00 951.00 1592.00
AP7521/2" (F) x 1-1/4" (D)RectangularEnd Posts
AP7531-1/4" (F) x 1/2" (D)RectangularBridge Posts
AP7541-1/4" (F) x 1/2" (D)RectangularEnd Posts
AP7611" (F) x 1-1/2" (D)RectangularBridge Posts
AP7631-1/2" (F) x 1" (D) RectangularBridge Posts
AP7641-1/2" (F) x 1" (D) RectangularEnd Posts
AP7621" (F) x 1-1/2" (D) RectangularEnd Posts
AP7511/2" (F) x 1-1/4" (D)RectangularBridge Posts
21
AP700 SERIES: SQUARE & RECTANGULAR PULLS
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
Family OA Size 605/606 609 611/612 613 613E 622 628 629 630Special
Finishes1" x 2" RectangularNotes: (F) Face, (D) Depth
12" 551.00 551.00 551.00 551.00 440.00 440.00 308.00 380.00 340.00 661.0018" 700.00 700.00 700.00 700.00 559.00 559.00 403.00 497.00 445.00 840.0024" 846.00 846.00 846.00 846.00 677.00 677.00 497.00 615.00 549.00 1015.0036" 1107.00 1107.00 1107.00 1107.00 886.00 886.00 687.00 849.00 759.00 1329.0048" 1368.00 1368.00 1368.00 1368.00 1094.00 1094.00 877.00 1083.00 969.00 1642.0060" 1538.00 1538.00 1538.00 1538.00 1230.00 1230.00 1000.00 1220.00 1104.00 1845.0012" 485.00 485.00 485.00 485.00 387.00 387.00 259.00 319.00 285.00 582.0018" 615.00 615.00 615.00 615.00 492.00 492.00 355.00 437.00 391.00 738.0024" 746.00 746.00 746.00 746.00 596.00 596.00 449.00 555.00 495.00 895.0036" 1039.00 1039.00 1039.00 1039.00 832.00 832.00 639.00 790.00 705.00 1247.0048" 1297.00 1297.00 1297.00 1297.00 1037.00 1037.00 829.00 1143.00 915.00 1557.0060" 1466.00 1466.00 1466.00 1466.00 1173.00 1173.00 953.00 1278.00 1052.00 1760.0012" 551.00 551.00 551.00 551.00 440.00 440.00 308.00 380.00 340.00 661.0018" 700.00 700.00 700.00 700.00 559.00 559.00 403.00 497.00 445.00 840.0024" 846.00 846.00 846.00 846.00 677.00 677.00 497.00 615.00 549.00 1015.0036" 1107.00 1107.00 1107.00 1107.00 886.00 886.00 687.00 849.00 759.00 1329.0048" 1368.00 1368.00 1368.00 1368.00 1094.00 1094.00 877.00 1083.00 969.00 1642.0060" 1538.00 1538.00 1538.00 1538.00 1230.00 1230.00 1000.00 1220.00 1104.00 1845.0012" 485.00 485.00 485.00 485.00 387.00 387.00 259.00 319.00 285.00 582.0018" 615.00 615.00 615.00 615.00 492.00 492.00 355.00 437.00 391.00 738.0024" 746.00 746.00 746.00 746.00 596.00 596.00 449.00 555.00 495.00 895.0036" 1039.00 1039.00 1039.00 1039.00 832.00 832.00 639.00 790.00 705.00 1247.0048" 1297.00 1297.00 1297.00 1297.00 1037.00 1037.00 829.00 1143.00 915.00 1557.0060" 1466.00 1466.00 1466.00 1466.00 1173.00 1173.00 953.00 1278.00 1052.00 1760.00
AP7742" (F) x 1" (D) RectangularEnd Posts
AP7711" (F) x 2" (D)RectangularBridge Posts
AP7721" (F) x 2" (D)RectangularEnd Posts
AP7732" (F) x 1" (D)RectangularBridge Posts
22
APC10: ROUND CLOSET & CABINET PULLS (FORMERLY 571 SERIES)
Family OA Size 605/606 611/612 613 613E 622 628 629 630 Special
4" 60.00 65.00 65.00 37.00 37.00 25.00 31.00 26.00 88.005" 61.00 68.00 68.00 39.00 39.00 26.00 32.00 27.00 92.006" 62.00 69.00 69.00 56.00 56.00 37.00 47.00 38.00 93.008" 66.00 71.00 71.00 63.00 63.00 41.00 53.00 44.00 96.00
10" 70.00 74.00 74.00 68.00 68.00 45.00 56.00 47.00 100.0012" 78.00 86.00 86.00 73.00 73.00 48.00 60.00 50.00 116.0018" 104.00 113.00 113.00 78.00 78.00 52.00 66.00 54.00 153.0024" 119.00 130.00 130.00 95.00 95.00 62.00 79.00 66.00 176.0030" 141.00 152.00 152.00 111.00 111.00 73.00 92.00 76.00 205.00
4" 79.00 84.00 84.00 54.00 54.00 36.00 45.00 37.00 114.005" 80.00 86.00 86.00 60.00 60.00 40.00 50.00 41.00 116.006" 80.00 87.00 87.00 70.00 70.00 46.00 57.00 48.00 117.008" 82.00 89.00 89.00 73.00 73.00 48.00 60.00 50.00 120.00
10" 94.00 102.00 102.00 74.00 74.00 49.00 61.00 51.00 138.0012" 100.00 108.00 108.00 78.00 78.00 52.00 66.00 54.00 145.0018" 138.00 149.00 149.00 103.00 103.00 68.00 86.00 71.00 201.0024" 157.00 170.00 170.00 117.00 117.00 77.00 97.00 80.00 229.0030" 187.00 204.00 204.00 128.00 128.00 83.00 105.00 88.00 276.00
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
APC111/2" Dia.Square Ends
APC11: 1/2" dia. Round "Ladder" Type Closet or Cabinet Pulls
APC12: 5/8" dia. Round "Ladder" Type Closet or Cabinet Pulls
APC125/8" Dia.Square Ends
23
APC20: RECTANGULAR CLOSET & CABINET PULLS
Family Width Depth 313 335 628 712 Special
APC21 1/2" 1/2" 50.00 50.00 45.00 55.00 70.00
APC22 3/4" 1/2" 55.00 55.00 50.00 60.00 75.00
APC23 1" 1/2" 60.00 60.00 55.00 65.00 80.00
No Charge $25
$21 No Charge
$21 No Charge
No Charge
No Charge
No Charge
$10
$10
$10
APC30: MODERN EDGE PULL
Length Width 313 335 628 712 Special
3" 2.5" 28.50 28.50 26.00 31.00 35.00
4" 2.5" 33.00 33.00 30.00 36.00 40.50
6" 2.5" 42.00 42.00 38.00 45.50 51.50
8" 2.5" 50.50 50.50 46.00 55.00 62.00
10" 2.5" 59.50 59.50 54.00 65.00 73.00
12" 2.5" 68.00 68.00 62.00 74.50 83.50
18" 2.5" 97.00 97.00 88.00 105.50 119.00
24" 2.5" 125.50 125.50 114.00 137.00 154.00
PRICE LIST 20
NEW AP SERIES ARCHITECTURAL PULLS
7 • 2-1/2"
8 • 3"
3 • 1-3/8"
4 • 1-3/4"
5 • 2"
6 • 2-1/4"
G • BTB 1 • 3/8"
J • Concealed 2 • 1/2"
APC20: Rectangular Pulls, 9" CTC
PRICE ADDERS - LIST PRICE PER PULL
Mounting Types Door Thickness
E • Thru-bolt 0 • Custom
APC30-24
APC30-18
APC30-12
APC30-10
APC30-8
APC30-6
APC30-4
APC30-3
Family
APC30: Modern Edge Pulls
24
Mastercraft Bronze Notes:DB - Dark BronzeSB - Satin BronzeSND - Satin Nickel Bronze612 - Satin Bronze613 - Oil Rubbed Bronze
TRIMCO DESCRIPTION DB SB SNB 612 613710
Special Finishes
MasterCraft Bronze Pull Plate 915.00 915.00 915.00 915.00 915.00Aberdeen 3-1/2" x 14-3/4" Plate
X Velazquez 6-1/4" ctc Pull
Formerly: 1900 Pull Plate
MasterCraft Bronze Push Plate 512.00 521.00 521.00 521.00 521.00Aberdeen 3-1/2" x 14-3/4"
Formerly: 1901 Push Plate
STANLEY MasterCraft Bronze Push Plate 546.00 546.00 546.00 546.00 546.00 Quote Quote3-1/2" x 20-1/2"
FORMER PART #: 15
PIERCE Classic Pull Plate 752.00 752.00 752.00 752.00 752.00 Quote Quote3-1/2" x 20-1/2"
Note(s): BTB application available. Add $10.50 LIST per location.
FORMER PART #: 16
LAVA Classic Push Plate 546.00 546.00 546.00 546.00 546.00 Quote Quote3-5/8" x 20-1/2"
FORMER PART #: 17
LAVA - CAIRO Classic Pull Plate 910.00 910.00 910.00 910.00 910.00 Quote Quote3-5/8" x 20-1/2"
Note(s): BTB application available. Add $10.50 LIST per location.
FORMER PART #: 18
35 Classic Door Pull 765.00 765.00 765.00 765.00 765.00 Quote Quote12-1/2" ctc
Note(s): BTB application available. Add $10.50 LIST per location.
WENDELL MasterCraft Bronze Push Plate 498.00 498.00 498.00 498.00 498.00 Quote Quote3-3/4" x 15"
FORMER PART #: 50
WENDELL MasterCraft Bronze Pull Plate 582.00 582.00 582.00 582.00 582.00 Quote QuoteX1117-1 3-3/4" x 15" x 5" ctc Pull
FORMER PART #: 50x1117-1
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
25
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
BP1 1" dia. Back Plate for Pulls .125 15.50 15.50 15.50 15.50 14.20 14.00 15.50 14.20 17.60
BP2 1-1/4" dia. Back Plate for Pulls .125 15.50 15.50 15.50 15.50 14.20 14.00 15.50 14.20 17.60
BP3 1-1/2" dia. Back Plate for Pulls .125 17.90 17.90 17.90 17.90 17.60 17.40 17.90 17.60 22.40
BP4 2" dia. Back Plate for Pulls .125 17.90 17.90 17.90 17.90 17.60 17.40 17.90 17.60 22.40
57 Classic Pull - 8" ctc 325.00 325.00 325.00 325.00 313.00 406.00with Decorative Roses
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
58 Classic Pull - 8" ctc 287.00 287.00 287.00 287.00 277.00 359.00
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
59 Classic Pull - 10" ctc 309.00 309.00 309.00 309.00 299.00 387.00
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
111 Escutcheon
242 Flush Pull 9.50 9.50 9.50 10.30 6.60 12.702-1/2" dia.
243T Cane Bolt - Top - 15" 374.00 374.00 374.00 374.00 468.00
244B Cane Bolt - Bottom - 30" 492.00 492.00 492.00 492.00 614.00
Note(s): Cane Bolts can me made to any length required. Price at $7.00/inch.
248 Flush Pull 10.30 10.30 10.30 10.30 9.10 13.201-1/2" x 4"
507 ADA Restroom Sign - Men - Braille 58.00White on Blue ONLY - 8" x 8"1/32" Raised Letters & Pictogram
508 ADA Restroom Sign-Women-Braille 58.00White on Blue ONLY - 8" x 8"1/32" Raised Letters & Pictogram
509 ADA Restroom Sign-Unisex - Braille 64.00White on Blue ONLY - 8" x 8"1/32" Raised Letters & Pictogram
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
DISCONTINUED
X15AO
26
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
527 ADA Restroom Sign-Men/HC-BrailleWhite on Blue ONLY - 8" x 8" 64.001/32" Raised Letters & Pictogram
528 ADA Restroom Sign-Women/HC- 64.00Braille White on Blue ONLY- 8" x 8"1/32" Raised Letters & Pictogram
529 ADA Restroom Sign-Unisex/HC-Braille 64.00White on Blue ONLY - 8" x 8"1/32" Raised Letters & Pictogram
553 Drawer Pull 22.25 22.25 22.25 30.00 21.75 50.75 37.753" ctc
562-3 Drawer Pull 9.30 9.30 9.30 9.50 8.70 10.80 8.70 18.20 13.403-1/2" ctc
562-4 Drawer Pull 11.10 14.00 11.10 10.20 9.20 16.80 9.20 28.50 21.004" ctc
562-96(mm) Drawer Pull 17.25 17.25 17.25 17.25 17.25 20.50 17.25 34.50 25.5096mm ctc
Note(s): Add $1.25 LIST for screws over 1-1/2" long.
571-6 Cabinet Pull - 6" ctc
571-8 Cabinet Pull - 8" ctc
571-10 Cabinet Pull - 10" ctc
620 Door Knocker 70.00 70.00 70.00 70.00 68.00 87.00
620V With Viewer (975) 92.00 92.00 92.00 92.00 90.00 115.00
620VE With Engraving (3 characters) 114.00 114.00 114.00 114.00 112.00 142.00Prep for Viewer ONLY add $6.25 LIST
621 Door Knocker 100.00 100.00 100.00 100.00 96.00 124.00
621V With Viewer (975) 128.00 128.00 128.00 128.00 120.00 159.00
621VE With Engraving (3 characters) 150.00 150.00 150.00 150.00 142.00 186.00Prep for Viewer ONLY add $6.25 LIST
625CV Door Knocker with Viewer 90.00 90.00 90.00 90.00 88.00 113.00and Card Holder
625CVE Door Knocker with Viewer, 96.00 96.00 96.00 96.00 93.00 120.00Card Holder & 1/2" Engraving (3 characters)
625V Door Knocker with Viewer 96.00 96.00 96.00 96.00 93.00 120.00
625VE Door Knocker with Viewer & 102.00 102.00 102.00 102.00 98.00 128.001/2" Engraving (3 characters)
NEW! - Now the APC10 Series
See APC10 Options & Pricingon Page 23
27
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
751 Handicap Sign with Braille 105.00White on Blue ONLY - 8" x 8"ADA
752 Title 24 Restroom Sign - Unisex 120.0012" Triangle - 12" dia. CircleWhite on Blue ONLY
753 Title 24 Restroom Sign - Men 63.0012" TriangleWhite on Blue ONLY
754 Title 24 Restroom Sign - Women 63.0012" dia. CircleWhite on Blue ONLY
Note(s): 752, 753 & 754 do not have braille. Available upon request. Call for quote.
760 Engraved Plastic Sign Material Per LetterSketch Required 25.50 7.00
32.50 8.0046.25 9.0061.00 109.00
771 Decal Signage "This Door…" 17.75Note(s): 2 Pack: 1 - Black Letters on Clear & 1 - White Letters on Clear
773 Decal Signage "These Doors…" 17.75Black letters on Silver ONLY
793 Engraved Metal Sign Material Per LetterSketch Required 55.00 13.90
62.00 15.6084.00 23.25
146.00 165.00
802 3-Way Catch 14.50 14.25 28.50Machine Finish 3/8" x 1-5/16" 606 only
804 3-Way Catch 20.50 20.25 40.50Machine Finish 1/2" x 2-3/4" 606 only
810 Heavy Duty Magnetic Catch 14.253-1/4" x 1" x 3/4"
Note(s): 603 finish only (Zinc over Steel)
Int'l Code Symbol
Letter Size1/2"1"2"
Letter Size1/2"1"2"
Int'l Code Symbol
28
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
975 Door Viewer 8.20 38.00 8.20160º 605 only
975-1 UL Door Viewer 12.40 12.40160º - 11/16" to 1-1/16" thick door 605 only
975L Door Viewer - Extra Long 9.30 44.75 9.30160º 605 only
975U UL Door Viewer 9.30 44.75 9.30160º 605 only
975U-CAP UL Door Viewr with Cap 15.00 53.00 15.00160º 605 only
975CV Cap only for 975 Viewer (10 pk) 68.00 85.00 68.00605 only
976 Door Viewer 10.90 47.00 11.60200º 605 only
976U UL Door Viewer 12.40 49.00 13.20200º 605 only
976U-CAP UL Door Viewer with Cap 18.75 55.00 18.75200º 605 only
976CV Cap only for 976 Viewer (10 pk) 62.00 78.00 62.00200º 605 only
977U-HDCAP Door Viewer 26.00 22.00 22.00200º 622 Finish
T-Etch Push Plates T-Etch Push Plates - .050"Monochrome
Color Infill Call For Project Quotation 1 Color (per color, per plate)Additional Infill Colors (per color, per plate)
Note(s): Order form and Logo Authorization Form available online at www.trimcohardware.com
1001-1 Push Plate 3" x 12" 31.00 31.00 16.00 29.75 28.25 31.00 13.00 52.00 38.751001-1CFC Push Plate 3" x 12" - Cut for Cyl 42.00 42.00 29.00 41.00 39.00 42.00 23.75 71.00 53.00
1001-2 Push Plate 3-1/2" X 15" 27.75 31.00 20.00 36.50 12.50 36.50 16.25 62.00 45.501001-2CFC Push Plate 3-1/2" X 15" Cut for Cyl 38.75 42.00 33.25 47.75 23.25 47.75 27.75 66.00 48.50
1001-3 Push Plate 4" x 16" 31.00 36.50 20.00 36.50 12.50 36.50 16.25 53.00 45.501001-3CFC Push Plate 4" x 16" - Cut for Cyl 42.00 47.75 33.25 47.75 23.25 47.75 27.25 81.00 60.00
1001-3.BPVC Push Plate 4" x 16" with Cool Touch Coating 54.00
1001-9 Push Plate 6" x 16" 47.75 60.00 32.00 47.75 58.00 63.00 26.25 107.00 78.751001-9CFC Push Plate 6" x 16" - Cut for Cyl 59.00 71.00 45.25 59.00 67.50 75.00 37.00 125.00 93.00
1001-11 Push Plate 8" x 16" 72.00 72.00 57.00 72.00 66.00 72.00 46.75 120.75 90.00
Note(s): CFC - Cut for cylinder.Standard for 1001-1, 1001-2 & 1001-3: 1-1/4" hole, 2" from top of plate to center of hole.Specify for other location and for 1001-9 & 1001-11.
Interior w/ Cap
29
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1010-1 Pull Plate 3" x 12" 92.00 102.00 102.00 102.00 100.00 93.00 97.00 100.00 128.00with 5" ctc Pull
1010-2 Pull Plate 3-1/2" x 15" 92.00 102.00 102.00 102.00 100.00 93.00 97.00 100.00 128.00with 5" ctc Pull
1010-3 Pull Plate 4" x 16" 100.00 107.00 107.00 107.00 107.00 97.00 107.00 103.00 132.00with 5" ctc Pull
1012-2 Pull Plate 3-1/2" x 15" 175.00 175.00 175.00 163.00 175.00 168.00 218.00with 5-1/2" ctc Pull
1012-3 Pull Plate 4" x 16" 175.00 175.00 175.00 163.00 175.00 168.00 218.00with 5-1/2" ctc Pull
1013-2 Pull Plate 3-1/2" x 15" 120.00 79.00 119.00 120.00 65.00 151.00with 5-1/2" ctc Pull
1013-2B Pull Plate 3-1/2" x 15" 133.00 97.00 131.00 133.00 79.00 166.00with 8" ctc Pull
1013-3 Pull Plate 4" x 16" 133.00 100.00 133.00 82.00 166.00with 5-1/2" ctc Pull
1013-3B Pull Plate 4" x 16" 144.00 120.00 180.00 144.00 98.00 225.00with 8" ctc Pull
1014-2 Pull Plate 3-1/2" x 15" 87.00 87.00 78.00 86.00 87.00 64.00 109.00with 6" ctc Pull
1014-3 Pull Plate 4" x 16" 95.00 95.00 80.00 93.00 95.00 66.00 118.00with 6" ctc Pull
1014-3B Pull Plate 4" x 16" 103.00 103.00 103.00 97.00 103.00 84.00 130.00with 8" ctc Pull
1015-2 Pull Plate 3-1/2" x 15" 90.00 90.00 73.00 89.00 90.00 60.00 113.00with 6" ctc Pull
1015-2B Pull Plate 3-1/2" x 15" 102.00 102.00 79.00 102.00 102.00 65.00 128.00with 8" ctc Pull
1015-3 Pull Plate 4" x 16" 96.00 96.00 73.00 95.00 96.00 60.00 119.70with 6" ctc Pull
1015-3B Pull Plate 4" x 16" 102.00 102.00 79.00 101.00 102.00 65.00 128.00with 8" ctc Pull
3/4" - 3/4 Round
1" - 1/2 Round
1"x3/8" Bar
30
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1017-2 Pull Plate 3-1/2" x 15" 82.00 82.00 55.00 81.00 82.00 44.50 139.00 103.00with 6" ctc Pull
1017-2B Pull Plate 3-1/2" x 15" 86.00 86.00 55.00 84.00 78.00 86.00 44.50 143.00 107.00with 8" ctc Pull
1017-3 Pull Plate 4" x 16" 88.00 88.00 56.00 87.00 81.00 88.00 45.50 149.00 110.00with 6" ctc Pull
1017-3B Pull Plate 4" x 16" 94.00 94.00 56.00 93.00 87.00 94.00 45.50 156.00 118.00with 8" ctc Pull
1017-3C Pull Plate 4" x 16" 102.00 102.00 60.00 102.00 102.00 48.75 172.00 127.00with 10" ctc Pull
1018-2 Pull Plate 3-1/2" x 15" 137.00 137.00 87.00 131.00 137.00 71.00 231.00 172.00with 8" ctc Pull
1018-2B Pull Plate 3-1/2" x 15" 154.00 154.00 93.00 154.00 76.00 259.00 192.00with 10" ctc Pull
1018-3 Pull Plate 4" x 16" 154.00 154.00 88.00 154.00 72.00 259.00 192.00with 8" ctc Pull
1018-3B Pull Plate 4" x 16" 182.00 182.00 93.00 182.00 182.00 76.00 307.00 228.00 with 10" ctc Pull
Manufactured with Bactericidal Copper:1035-1 Pull Plate 3" x 12" 80.00 195.00
with 6" ctc Ultimate Restroom Pull
1035-2 Pull Plate 3-1/2" x 15" 83.00 209.00with 6" ctc Ultimate Restroom Pull
1035-3 Pull Plate 4" x 16" 85.00 214.00with 6" ctc Ultimate Restroom Pull
Note(s): For 630TG antimicrobial coating, add 30% to the 630 price
1041-4 Push Plate 8" x 16" 185.00 185.00 167.00 185.00 185.00 139.00 233.00
1056-4 Pull Plate 8" x 16" 272.00 272.00 265.00 272.00 272.00 221.00 341.00with 8" ctc Pull
1059 Round Flush Cup Pull 60.00 66.00 60.00 66.00 59.00 82.00Drive fit
1060 Flush Pull 65.00 54.00 54.00 84.00 45.00 114.00 84.002-3/4" x 4-1/4"
1061 Flush Pull 41.00 41.00 41.00 65.00 40.00 107.00 79.002-1/16" x 3-1/8"
Note(s): Standard inside finish is black.For same finish inside and outside, add $12.00 LIST. Example: 1060.626/626
1062 Concealed Door Pull Edge 76.00 76.00 74.00 76.00 62.00 97.001" x 4-1/4"
THE ULTIMATE RESTROOM PULL
3/4" Round
1" Round
31
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1063 Concealed Center Door Pull 31.75 31.75 25.25 31.75 21.75 40.503-7/8" x 3/4"
1064 Pocket Door Pull - Passage 17.25 20.50 20.50 20.50 17.25 25.50for both a 1-3/8" and 1-3/4" door
1064FCP Pocket Door Pull -Flush Cup Pull 13.50 13.50 13.50 13.50 11.00 17.00
1065 Pocket Door Pull - Privacy 19.50 22.25 21.00 21.00 18.90 27.75for a 1-3/8" door
1065-175 Pocket Door Pull - Privacy 20.50 23.25 22.25 22.25 18.90 29.00for 1-3/4" door
1065CD Pocket Door Pull - Connecting Door 21.75 24.00 24.00 24.00 20.25 30.00for 1-3/8" door. Specify for 1-3/4"
1065PA Pocket Door Pull - Patio Function 20.50 28.25 22.75 19.25for 1-3/8" door. Specify for 1-3/4"
1066S-932 Flush Pull Spindle Type 303.00 303.00 287.00 303.00 249.00 379.009/32" Square Spindle
1066S-516 Flush Pull Spindle Type 303.00 303.00 287.00 303.00 249.00 379.005/16" Square Spindle
1066S-38 Flush Pull Spindle Type 303.00 303.00 287.00 303.00 249.00 379.003/8" Square Spindle
1066S-DUMMY Flush Pull Spindle Type - Dummy 337.00 337.00 324.00 337.00 281.00 421.25
Note(s): 1066/1067/1068 Order Form must accompany PO.Add $80.00 LIST for special prep or modification.
1067-932 Flush Pull Spindle Type 303.00 303.00 287.00 303.00 249.00 379.009/32" Square Spindle
1067-516 Flush Pull Spindle Type 303.00 303.00 287.00 303.00 249.00 379.005/16" Square Spindle
1067-38 Flush Pull Spindle Type 303.00 303.00 287.00 303.00 249.00 379.003/8" Square Spindle
1067-DUMMY Flush Pull Spindle Type - Dummy 337.00 337.00 324.00 337.00 281.00 421.25
Note(s): 1066/1067/1068 Order Form must accompany PO.Add $80.00 LIST for special prep or modification. Must specify lockset.
1068-932 Flush Pull Spindle Type 414.00 414.00 413.00 414.00 359.00 517.009/32" Square Spindle
1068-516 Flush Pull Spindle Type 414.00 414.00 413.00 414.00 359.00 517.005/16" Square Spindle
1068-38 Flush Pull Spindle Type 414.00 414.00 413.00 414.00 359.00 517.003/8" Square Spindle
1068-DUMMY Flush Pull Spindle Type - Dummy 447.00 447.00 451.00 447.00 392.00 559.00
Note(s): 1066/1067/1068 Order Form must accompany PO.Add $80.00 LIST for special prep or modification. Must specify lockset.
32
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1069 Pocket Door - Push/Pull 260.00 260.00 228.00 260.00 198.00 438.00 325.00
1069L Pocket Door Pull - Passage/Latching 371.00 371.00 356.00 371.00 309.00 626.00 464.00
1069FP Pocket Door Pull - Full Privacy 519.00 519.00 513.00 519.00 446.00 876.00 649.00(with emergency key)
Note(s): Specify door thickness and handing for 1069FP.List price above is for frame sizes 4-3/4" to 5-1/2", or A size. For other sizes see below.List price adder for wider frames - price adders are the same for all finishes.For offset pocket and barn doors request a quote.
Frame Size - All Models List Price AdderA • 4-3/4" to 5-1/2" StandardB • 5-3/4" to 7" 62.00C • 7-1/4" to 8-1/2" 72.00D • 8-3/4" to 10" 82.00E • 10-1/4" to 11-1/2" 92.00F • 11-3/4" to 13" 102.00
1070-2 Classic Push Plate 3-1/2" x 15" only 168.00 168.00 168.00 168.00 168.00 210.00
1071-2 Classic Pull Plate 3-1/2" x 15" only 294.00 294.00 294.00 294.00 294.00 368.00 with 8" ctc Pull
613E 622 629 630 SPEC
1074-1 Barn Door Latchset - Tubular - 2-3/8" BS 358.00 358.00 358.00 291.00 400.00Privacy with Push Button (Positive Latching) Rose Trim
1074-2 Barn Door Latchset - Mortise - 2-3/4" BS 912.00 912.00 912.00 729.00 1,096.00Privacy with Cylinder and ThumbturnRose Trim
1074-2E Barn Door Latchset - Mortise - 2-3/4" BS 959.00 959.00 959.00 767.00 1,152.00Privacy with Cylinder and ThumbturnEscutcheon Trim
1074-2C Barn Door Latchset - Mortise - 2-3/4" BS 1,313.00 1,313.00 1,313.00 1050.00 1,573.00Privacy with Cylinder & Constant Latching Rose Trim
1074-2CE Barn Door Latchset - Mortise - 2-3/4" BS 998.00 998.00 998.00 799.00 1,198.00Privacy with Cylinder & Constant Latching Escutcheon Trim
1074-3 Barn Door Latchset - Tubular - 2-3/8" BS 365.00 365.00 365.00 291.00 438.00PassageRose Trim
Note(s): Trimco supplies cylinder for mortise (-2) functions.Specify Urban lever style and handing.Specify door thickness for all models.
Options: 5004 - Indictor (mortise only). Add $340 LIST.1L - Levers only on one side (mortise only).
Special Finishes
Oil Rubbed Bronze
Equivalent
SatinStainless
Steel
MatteBlack
Polished Stainless
Steel
1
1074-1
1074-2
1074-2E
1074-2E x 5004
33
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
613E 622 625 600W 630E SPEC
WS-1074-1 Wall Strike - Direct Mount 195.00 195.00 195.00 195.00 195.00 265.00For 1074-1 Tubular Lock
WSJ-1074-1 Wall Strike - Jamb Mount 215.00 215.00 215.00 215.00 215.00 290.00For 1074-1 Tubular Lock
WS-1074-2 Wall Strike - Direct Mount 195.00 195.00 195.00 195.00 195.00 265.00For 1074-2 Mortise Lock
WSJ-1074-2 Wall Strike - Jamb Mount 215.00 215.00 215.00 215.00 215.00 290.00For 1074-2 Mortise Lock
1082-4 Cylindrical Lock Guard - 4" 70.00 37.50 87.00
1082-6 Cylindrical Lock Guard - 6" 82.00 59.00 102.00
1082-6S Cylindrical Lock Guard - 6" 85.00 109.00With Welded Thru-Bolt Studs
1082-8 Cylindrical Lock Guard - 8" 85.00 109.00Specify Handing > RHR or LHR
1096HA Anti-Vandal Pull with Astragal 469.00 391.00 469.00 320.00 586.00
1096IRHA Anti-Vandal Pull with Astragal 425.00 339.00 425.00 277.00 531.00For Von Duprin 98/99Specify Handing.
1096VD98-99HA Anti-Vandal Pull with Astragal 425.00 339.00 425.00 277.00 531.00For Von Duprin 98/99Non-Handed > Cylinder Mounted Horizontal
1096TL Tuf-Lok System - Anti-Vandal Push & Pull 1,279.00 1,139.00 1,279.00 931.00 1,600.00Classroom Function without CylinderIncludes Mortise Lock for outswing doorsWith Astragal
1096PHI Anti-Vandal Pull with Astragal 425.00 339.00 425.00 277.00 531.00For Precision PHI Apex 2000 Series
TC201880053 Rim Cylinder Cup 7.40Use to mount rim cylinder to 1096/1097
Note(s): Anti-Vandal Order Form must accompany purchase orders.Options: NC No Cylinder No Charge
Use Order Form to Specify Handing, Device and Backset
Special Finishes
MatteBlack
Polished Chrome (use
with 629
White Prime Coat
Specify Exit Device Type, Single or Pair of Doors, Cylinder or No Cylinder, Strike Type and Handing. See Cut Sheet for Details.
Stainless Steel
Equivalent
Oil Rubbed Bronze
Equivalent
Wall StrikeJamb Mount
Wall StrikeDirect Mount
34
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1097HA Anti-Vandal Pull without Astragal 469.00 391.00 469.00 320.00 586.00
1097IRHA Anti-Vandal Pull without Astragal 425.00 339.00 424.00 277.00 531.00For Von Duprin 98/99Specify Handing.
1097VD98-99HA Anti-Vandal Pull without Astragal 425.00 339.00 424.00 277.00 531.00For Von Duprin 98/99Non-Handed > Cylinder Mounted Horizontal
1097TL Tuf-Lok System - Anti-Vandal Push & Pull 1,279.00 1,139.00 1,279.00 931.00 1,600.00Classroom Function without CylinderIncludes Mortise Lock for outswing doorsWith Astragal
1097PHI Anti-Vandla Pull without Astragal 425.00 425.00 277.00 531.00For Precision PHI Apex 2000 Series
TC201880053 Rim Cylinder Cup 7.40Use to mount rim cylinder to 1096/1097
Note(s): Anti-Vandal Order Form must accompany purchase orders.Options: NC No Cylinder No Charge
Use Order Form to Specify Handing, Device and Backset
1098RGHA Anti-Vandal Pull with Astragal 365.00 485.00With/without cylinder prepMated to specified mortice or deadlock.
1098RG Anti-Vandal Pull with Astragal 825.00 1,032.00Mated to BEST/PDQ SFIC Cylindrical LockWith/without hold back.No cores or keys supplied.
1098RGL Anti-Vandal Pull with Astragal 825.00 1,032.00Mated to PDQ LFIC Cylindrical LockWith/without hold back.No cores or keys supplied.
1099RGHA Anti-Vandal Pull without Astragal 365.00 502.00With/without cylinder prep
Mated to specified mortice or deadlock.
1099RG Anti-Vandal Pull without Astragal 825.00 1,032.00Mated to BEST/PDQ SFIC Cylindrical LockWith/without hold back.No cores or keys supplied.
1099RGL Anti-Vandal Pull without Astragal 825.00 1,032.00Mated to PDQ LFIC Cylindrical LockWith/without hold back.No cores or keys supplied.
Specify Exit Device Type, Single or Pair of Doors, Cylinder or No Cylinder, Strike Type and Handing. See Cut Sheet for Details.
35
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1102S Pull - 5-1/2" ctc 60.00 60.00 55.00 60.00 47.25 58.00 76.00
Surface MountedSpecial BTB Application Available
1102CS Pull - 5-1/4" ctc 60.00 60.00 55.00 60.00 47.25 58.00 76.00Surface MountedSpecial BTB Application Available
1102T Pull - 5-1/2" ctc 60.00 60.00 55.00 60.00 47.25 58.00 76.00Thru-bolt MountedSpecial BTB Application Available
1102CT Pull - 5-1/4" ctc 60.00 60.00 55.00 60.00 47.25 58.00 76.00Thru-bolt MountedSpecial BTB Application Available
1109-1 Pull - 5-1/2" ctc Cast 152.00 175.00 152.00 146.00 190.00
1110-8 Flush Pull - 8" x 2-1/2" 81.00 81.00 77.00 69.00 102.00
1110-10 Flush Pull - 10" x 2-1/2" 104.00 104.00 97.00 86.00 131.00
1110-18 Flush Pull - 18" x 2-1/2" 175.00 175.00 174.00 155.00 218.00
Note(s): Custom sizes available. Call for quote.Can be mounted BTB on 1-3/4" or thicker doors.
1111A Flush Pull - 5" x 5" 233.00 233.00 180.00 233.00 147.00 391.00 290.00Mounting Holes in CupBTB Not Available, Use 1111B
1111B Flush Pull - 5" x 5" 233.00 233.00 180.00 233.00 147.00 391.00 290.00Mounting Holes on Face PlateSpecial BTB Application Available
1111C Flush Pull - 6" x 6" 260.00 260.00 239.00 260.00 195.00 438.00 324.00Mounting Holes in CupMeets California Disability RequirementsSpecial BTB Application Available
1111C.BPVC Flush Pull with Cool Touch Coating 457.00Flush Pull - 6" x 6"Mounting Holes in CupMeets California Disability Requirements
1111L Flush Pull - 5" x 5" 260.00 260.00 239.00 260.00 195.00 438.00 324.00Countersunk Holes on Face Platewith Lugs
1113 Flush Pull 60.00 45.50 60.00 38.00 75.001-3/8" x 3-3/16"
1115 Flush Pull - Mounting Holes on Face Plate 80.00 80.00 42.00 80.00 34.75 135.00 100.003-1/2" x 4-3/4"
1115B Flush Pull - BTB / Pair 152.00 152.00 95.00 152.00 76.00 263.00 190.003-1/2" x 4-3/4"
1115C Flush Pull - Mounting Holes in Cup 68.00 68.00 47.50 68.00 38.00 116.00 86.003-1/2" x 4-3/4"
1115P Flush Pull - BTB with Lugs 174.00 174.00 142.00 174.00 114.00 293.00 217.003-1/2" x 4-3/4"
1
1
36
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1117-1 Pull - 5" ctc 55.00 55.00 55.00 55.00 45.00 53.00 68.00
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
1120 Pull - 6" ctc 182.00 182.00 182.00 182.00 166.00 228.00
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
1134 Hospital Pull - 6" ctc 177.00 177.00 177.00 177.00 177.00 299.00 221.00Surface Mounted
1134B Hospital Pull - 4-7/8" ctc 387.00 387.00 387.00 387.00 387.00 651.00 482.00BTB / Pair
1135 Hospital Pull - 6" ctc 149.00 149.00 80.00 90.00 69.00 161.00 223.00
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
1139-1 Pull - 6" ctc 72.00 72.00 49.50 72.00 70.00 72.00 43.00 122.00 90.00
1139-2 Pull - 8" ctc 84.00 84.00 55.00 84.00 82.00 84.00 47.25 142.00 105.00
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
1150 1/2" dia. Pull - 6" ctc 69.00 69.00 61.00 67.00 69.00 53.00 116.00 86.00
1151 1/2" dia. Pull - 8" ctc 75.00 75.00 63.00 75.00 69.00 75.00 55.00 125.00 93.00
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
1160 Series
NEW! - Now the AP400 Series
1170 Series
See AP400 Options & Pricingon Pages 8 - 11
NEW! - Now the AP400 Series
See AP400 Options & Pricingon Pages 8 - 11
1"x3/8" Bar
1/2" Round
Round
Round
37
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1191-1 3/4" dia. 90º Offset Pull - 8" ctc 133.00 133.00 93.00 133.00 133.00 121.00 133.00 81.00 224.00 166.00
1191-2 3/4" dia. 90º Offset Pull - 10" ctc 133.00 133.00 103.00 133.00 133.00 121.00 133.00 90.00 224.00 166.00
1191-3 1" dia. 90º Offset Pull - 10" ctc 172.00 172.00 105.00 172.00 163.00 158.00 172.00 92.00 288.00 214.00
1191-3A 1" dia. 90º Offset Pull - 8" ctc 167.00 167.00 100.00 167.00 158.00 153.00 167.00 87.00 283.00 209.00
1191-3B 1" dia. 90º Offset Pull - 9" ctc 167.00 167.00 100.00 167.00 158.00 153.00 167.00 87.00 283.00 209.00
1191-4 1" dia. 90º Offset Pull - 12" ctc 182.00 182.00 118.00 182.00 182.00 168.00 182.00 103.00 308.00 228.00
1191-4J 1-1/4" dia. 90º Offset Pull - 12" ctc 331.00 331.00 311.00 331.00 331.00 305.00 331.00 270.00 559.00 414.00
1191-5 1" dia. 90º Offset Pull - 18" ctc 248.00 248.00 178.00 248.00 248.00 226.00 248.00 155.00 365.00 310.00
1191-5J 1-1/4" dia. 90º Offset Pull - 18" ctc 365.00 365.00 318.00 365.00 365.00 336.00 365.00 277.00 616.00 455.00
1191E-3-4.BPVC Offset Pull with Cool Touch Coating 129.001" dia. 90º Offset Pull - 10" ctc, 1-3/4" door
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.fOCAL Desiger Option: Add $35.00 LIST
1193-1 3/4" dia. 3/4 Round Pull 90.00 90.00 83.00 90.00 89.00 90.00 72.00 113.005-1/2" ctc
1193-2 3/4" dia. 3/4 Round Pull 90.00 90.00 89.00 90.00 90.00 90.00 78.00 113.008" ctc
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
1194-1 3/4" dia. Straight Pull - 6" ctc 68.00 68.00 40.00 68.00 67.00 62.00 68.00 35.00 114.00 84.00
1194-2 3/4" dia. Straight Pull - 8" ctc 72.00 72.00 42.75 72.00 72.00 66.00 72.00 37.25 121.00 90.00
1194-3 3/4" dia. Straight Pull - 10" ctc 79.00 79.00 48.00 79.00 79.00 72.00 79.00 41.50 133.00 98.00
1194-4 3/4" dia. Straight Pull - 12" ctc 84.00 84.00 59.00 84.00 83.00 77.50 84.00 52.00 142.00 111.00
1194E-1-4.BPVC Straight Pull with Cool Touch Coating 72.003/4" dia. Straight Pull - 6" ctc, 1-3/4" door
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
1195-1 1" dia. Straight Pull - 8" ctc 104.00 104.00 70.00 104.00 102.00 96.00 104.00 60.00 176.00 131.00
1195-2 1" dia. Straight Pull - 10" ctc 116.00 116.00 77.00 116.00 115.00 107.00 116.00 67.00 196.00 145.00
1195-3 1" dia. Straight Pull - 12" ctc 123.00 123.00 92.00 123.00 123.00 114.00 123.00 79.00 197.00 154.00
1195-3J 1-1/4" dia. Straight Pull - 12" ctc 313.00 313.00 242.00 313.00 287.00 285.00 313.00 221.00 392.00
1195-6 1" dia. Straight Pull - 18" ctc 198.00 198.00 142.00 198.00 198.00 183.00 198.00 123.00 333.00 247.00
1195-6J 1-1/4" dia. Straight Pull - 18" ctc 371.00 371.00 302.00 371.00 371.00 341.00 371.00 262.00 464.00
1195E-1-4.BPVC Straight Pull with Cool Touch Coating 96.001" dia. Straight Pull - 8" ctc, 1-3/4" door
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
1185 Series NEW! - Now the AP300 SeriesSee AP300 Options & Pricing
on Page 5
Round
3/4" - 3/4 Round
3/4" Round
Round
38
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1198-1-12 1-1/4" dia. Grab Bar - 12" Manufactured with Bactericidal Copper: 175.00
1198-1-18 1-1/4" dia. Grab Bar - 18" 192.00
1198-1-24 1-1/4" dia. Grab Bar - 24" 208.00
1198-1-30 1-1/4" dia. Grab Bar - 30" 223.00
1198-1-36 1-1/4" dia. Grab Bar - 36" 237.00
1198-1-42 1-1/4" dia. Grab Bar - 42" 293.00
1198-1-48 1-1/4" dia. Grab Bar - 48" 338.00Note(s): Minimum order maybe required
1199-1 1" dia. 1/2 Round Straight Pulls 72.00 72.00 72.00 72.00 72.00 72.00 62.00 90.006" ctc
1199-2 1" dia. 1/2 Round Straight Pulls 84.00 84.00 84.00 84.00 84.00 84.00 75.00 105.008" ctc
Note(s): Thru-Bolt mounting standard. See Mounting Methods for additional options.
1200 Floor Stop 34.25 34.25 33.00 34.25 27.75 43.00Wood Screws
1201 Floor Stop 43.25 43.25 32.75 43.25 27.75 53.75Combo Pack
1201-5* Floor Stop - 5" 146.00 146.00 146.00 146.00 136.00 182.00MS ES only
1201CK Floor Stop 62.00 62.00 62.00 62.00 59.00 77.00Combo Pack - Torx Screws
D1201000073 Rubber only: 1200 & 1201 (Grey) 1.60D1224000073 Rubber only: 1201-5 (Grey) 3.50
1204 Base Stop 36.50 36.50 31.75 36.50 27.00 45.50Wood Screws
1205 Base Stop 36.50 36.50 31.75 36.50 27.00 45.50Combo Pack
D1201000073 Rubber only: 1204 & 1205 (Grey) 1.60
1206 Base Stop & Holder 55.25 55.25 45.25 55.25 38.75 69.00
Wood Screws
1207 Base Stop & Holder 55.25 55.25 45.25 55.25 38.75 69.00Combo Pack
D1201000073 Rubber only: 1206 & 1207 (Grey) 1.60
1208 Base Stop - 3-3/8" Projection 17.25 17.25 18.00 17.25 14.50 22.00Hanger Bolt
D1208000073 Rubber only: 1208 (Grey) 1.60
1
1" - 1/2 Round
39
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1209 Heavy-Duty Floor Stop - 1-3/8" Tall Rubber 63.00 63.00 55.00 47.00 62.70 47.00 78.00Grade 8 Tensile Bolt
1209-3 Heavy-Duty Floor Stop - 3" Tall Rubber 79.00 79.00 72.00 59.00 79.00 59.00 99.00Grade 8 Tensile Bolt
1209W Heavy-Duty Wall Stop 47.00SS Cap Screw
1209HA Extra Heavy-Duty Floor Stop 86.003" High Rubber; 1" dia. 7" long SS Post
1209HO Heavy-duty Floor Stop, Hold-Open 83.00
1209HOHA Extra Heavy-Duty Floor Stop 352.00Hold Open
1211 Cast Universal Dome Stop 12.50 12.50 12.50 12.50 11.50 21.00Low Rise Lip x High Rise RubberCombo Pack
D1211000073 Rubber only: 1211 (Grey) 1.50
W1211 Wrought Universal Dome Stop 12.50 12.50 12.50 12.50 12.50 12.50 12.50 21.00Combo Pack
D121000073 Rubber only: W1211 (Grey) 1.50
1211CL Carpet Riser for Cast 1211 8.00 8.00 7.50 9.901/2" riser (Aluminum) - Specify Stop Finish
1211CH Carpet Riser for Cast 1211 8.60 8.60 8.30 11.103/4" riser (Aluminum) - Specify Stop Finish
Note(s): Each 1211CL and 1211CH comes with a 2-1/4" stem and screwRisers are not available for the W1211
1214 Floor Stop - 1-3/4" high 36.50 35.25 31.50 36.50 27.50 45.50Combo Pack
1214H Floor Stop - 2-1/4" high 40.50 38.75 34.75 40.50 31.00 51.00Combo Pack
1214CK Floor Stop - 2-1/4" high 48.75 43.75 42.00 48.75 37.25 61.00Combo Pack - Torx Screws
3.50D1214CK0073 Rubber only: 1214 (Grey)
1214CK x 1268CK Floor Stop & Anchor Plate 152.00 152.00 136.00 152.00 121.00 189.002-1/4" High with Torx Screws
D1214CK0073 Rubber only: 1214 (Grey) 3.50
1215CKU Universal Floor Stop 39.50 39.50 34.75 39.50 31.00 49.50Low Lip x High RubberCombo Pack
D1215000073 Rubber only: 1215CKU (Grey) 3.50
1217P Angle Stop for Pair of Doors 48.00 48.00 42.00 48.00 37.50 48.00
1217S Angle Stop for Single Door 48.00 48.00 42.00 48.00 37.50 48.00
40
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1220-5 Kickdown Door Holder - 5" 41.00 45.25 42.00 48.75 37.25 76.00
1221-4 Kickdown Door Holder - 4" 18.25 23.25 19.00 16.50 29.00Finish is Sprayed to Match 606 Only
1221-4FF Kickdown Door Holder - 4" 40.00 38.50 42.00 45.50 37.25 61.00Full Finish (Hand Polished)
D1220000073 Rubber only: 1220 & 1221 (Grey) 3.50
1223 Floor Stop & Holder 59.00 59.00 59.00 59.00 54.00 73.00
Wood Screws
1224 Floor Stop & Holder 59.00 59.00 59.00 59.00 54.00 73.00Combo Pack
D1201000073 Rubber only: 1223 & 1224 (Grey) 1.60
1224-5 Floor Stop & Holder - 5" 155.00 155.00 155.00 155.00 130.00 194.00Combo Pack
D1224000073 Rubber only: 1224-5 (Grey) 3.50
1229A Silencers (price per 100) 23.75Sold in multiples of 100For use on metal framesAvailable in grey, black, or brown
1229B Silencers (price per 100) 23.75Sold in multiples of 100For use on wood framesAvailable in grey or white
1229EL Elevator Bumpers (price per 125) 490.00Grey only Sold in multiples of 125
1231 Floor Stop - 2" High 39.50 34.25 26.25 39.50 22.75 49.50Combo Pack
1233 Floor Stop - 2-7/8" High 43.75 39.50 30.50 43.75 27.00 55.00Combo Pack
D1201000073 Rubber only: 1231 & 1233 (Grey) 1.50
1234 Floor Stop & Holder 62.00 62.00 45.25 62.00 38.25 77.00Combo Pack
D1224000073 Rubber only: 1234 (Grey) 1.60
1235 Base Stop 25.75 25.75 25.75 25.75 25.00 32.25Wood Screws3" Projection
1240 Hinge Pin Stop 7.701/4" & 5/16" Hinge Pin 619 Only
41
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1244 Roller Stop 58.00 58.00 48.50 57.75 37.50 73.004-1/4" Projection
1244-6 Roller Stop 62.50 62.50 60.00 62.50 46.50 78.006-1/2" Projection
D1244000073 Rubber only: 1244 & 1244-6 (Grey) 3.50
1245 Roller Stop 77.00 77.00 47.25 77.00 37.25 120.00Curved
D1244000073 Rubber only: 1245 (Grey) 3.50
1254 Wall Stop & Holder 80.00 80.00 59.00 80.00 54.00 100.002-1/8" ProjectionCombo Pack
1255 Plunger Door Holder 49.25 49.25 36.75 49.25 28.75 61.50
D1255000073 Rubber only: 1255 (Grey) 3.50
1257M Floor Stop & Holder 308.00 308.00 335.00 308.00 263.00 385.00MS & ES
1257R Riser for the 1257M 268.00 343.00Aluminum Sprayed to MatchSpecify Stop Finish5" High
1258M Floor Stop 240.00 240.00 240.00 240.00 235.00 300.00MS & ES
1261 Floor Stop & Holder 109.00 109.00 95.00 109.00 79.00 136.001/2" Door Clearance
1263 Floor Stop & Holder 120.00 120.00 103.00 120.00 84.00 151.001-1/16" Door Clearance
1265 Floor Stop & Holder 137.00 137.00 114.00 137.00 93.00 172.001-9/16" Door Clearance
1267 Floor Stop & Holder 149.00 149.00 130.00 149.00 106.00 185.002-1/16" Door Clearance
1260W Wall Stop and Holder with Strike 84.00 84.00 80.00 84.00 71.00 105.00
1260WP Wall Stop and Holder 205.00 205.00 205.00 205.00 191.00 257.00With Pipe Adapter StrikeAdd $25.00 LIST for 12" pipe
1260P Pipe Adapter Strike 103.00 103.00 103.00 103.00 99.00 129.00.75 IPSAdd $25.00 LIST for 12" Pipe
42
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1268 Anchor Plate 60.00 60.00 60.00 60.00 59.00 56.00 76.00Sprayed to Match3-1/2" diameterAdd $5.50 LIST for adapting for a stop
1268CK Anchor Plate 92.00 92.00 92.00 82.00 116.00Sprayed to Match2-3/4" diameterAdd $5.50 LIST for adapting for a stop
1270CV Cast Wall Bumper 15.00 15.00 15.00 18.20 14.50 22.90ConcaveCombo Pack
1270WV Wrought Wall Bumper 7.40 7.40 7.40 7.40 4.50 9.30ConcaveCombo Pack
D1270010073 Concave Rubber: 1270CV & 1270WV (Grey) 2.00
1270CX Cast Wall Bumper 15.00 15.00 15.00 18.20 14.50 22.90ConvexCombo Pack
1270WX Wrought Wall Bumper 7.40 7.40 7.40 7.40 4.50 9.30ConvexCombo Pack
D1270020073 Convex Rubber: 1270CX & 1270WX (Grey) 2.00
1270CVPV Cast Concave Wall Bumper 32.75 30.00 30.00 32.75 24.00 40.75Prison Version with Torx ScrewExpansion Shield & Anti Rotation Pin
1270CVSV Cast Concave Wall Bumper 40.25 36.00 36.00 40.25 24.00 50.25 School Version Surface Mounting
D1270010073 Concave Rubber: 1270CVSV & 1270CVPV 1.60(Grey)
1270CXPV Cast Convex Wall Bumper 32.75 30.00 30.00 32.75 24.00 40.75Prison Version with Torx ScrewExpansion Shield & Anti Rotation Pin
1270CXSV Cast Convex Wall Bumper 40.25 36.00 36.00 40.25 24.00 50.25School VersionSurface Mounting
D1270020073 Convex Rubber: 1270CXSV & 1270CXPV 1.60(Grey)
1275RP Small Wall Bumper 17.25 17.25 12.60 17.25 9.50 21.50Convex Rubber Only
1277 Large Cast Wall Bumper - 4" Diameter 73.00 73.00 61.00 73.00 49.50 91.00Convex Rubber OnlyCombo Pack
D1277000073 Rubber only: 1277 (Grey) 11.60
43
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1278CV Cast Décor Wall Bumper - Concave 22.25 22.25 22.25 22.25 18.00 27.75Combo Pack
1278CX Cast Décor Wall Bumper - Convex 22.25 22.25 22.25 22.25 18.00 27.75Combo Pack
D1270010073 Rubber only: 1278CV (Grey) 1.60
D1270020073 Rubber only: 1278CX (Grey) 1.60
L1280 Door Stop & Holder 72.00 72.00 67.00 72.00 59.00 90.002-3/4" Projection
L1280CI Door Stop & Holder 61.00 61.00 51.00 61.00 44.50 76.00Sprayed to Match
1283-2S "Adjustre" Floor Stop & Holder 166.00 166.00 153.00 166.00 135.00 207.00
1283-4S "Adjustre" Wall Stop & Holder 166.00 166.00 153.00 166.00 135.00 207.00 Adjustable Wall Strike
1283LS "Adjustre" Floor Stop & Holder 277.00 352.00(Lockable)
1283-6S "Adjustre" Wall Stop & Holder 188.00 188.00 188.00 188.00 185.00 235.00 Adjustable Wall Strike
1290 Floor Stop and Holder 397.00 397.00 397.00 397.00 390.00 497.00Heavy-duty
1291 Floor Stop 12.102-1/2" High 603 Only
1296 Base Stop - 4-11/64" Projection 25.50 25.50 24.25 25.50 18.00 32.00With Hanger Bolt
1296S Base Stop - 4-11/16" Projection 25.50 25.50 24.25 25.50 18.00 32.00Surface Mounted
1298 Door Stop 88.00 88.00 86.00 88.00 70.00 110.004-3/16" Projection
D1201000073 Rubber only: 1298 (Grey) 1.60
1301 9" ctc 230.00 243.00 243.00 304.00Special BTB Application Available
1310 Masterpiece Pull 1,528.00 1,528.00 1,517.00 1,909.0012" ctc
1320 Masterpiece Pull 1,213.00 1,250.00 1,562.00
44
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1330 Masterpiece Pull 1,468.00 1,504.00 1,880.00
1350L Masterpiece Pull - Left Hand 1,408.00 1,383.00 1,759.009" ctc
1350R Masterpiece Pull - Right Hand 1,408.00 1,383.00 1,759.009" ctc
1360 Masterpiece Pull 1,274.00 1,262.00 1,592.004-3/4" ctc
1370 Masterpiece Pull 1,093.00 1,067.00 1,364.008" ctc
1380 Masterpiece Pull 1,019.00 1,007.00 1,274.005" x 5"
1410 Masterpiece Pull 1,480.00 1,468.00 1,850.0022-3/4" ctc
1410-1 Masterpiece Pull 1,213.00 1,201.00 1,517.0017" ctc
1502 2-3/4" Backset Latchbolt 89.00 82.00 111.00For Push/Pull Latches Only
1503 3-3/4" Backset Latchbolt 89.00 82.00 111.00For Push/Pull Latches Only
1505 5" Backset Latchbolt 89.00 82.00 111.00For Push/Pull Latches Only
Reversed Action Latchbolt only Add: 108.00 108.00 135.00
1554 Heavy-duty Roller Latch 79.00 79.00 68.00 79.00 57.00 98.00B Strike standard.A & C Strikes available. Add $1.00.
1555 Closet Ball Catch 22.75 22.75 20.75 22.75 17.00 28.50
1555L Closet Ball Catch 22.75 22.75 20.75 22.75 17.00 28.50 with Long Strike
RH Shown
45
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1559WA Heavy-duty Roller Latch 59.00 60.00 55.00 59.00 46.00 74.00With Cast Strike
1559WB Heavy-duty Roller Latch 59.00 60.00 55.00 59.00 46.00 74.00With T-Strike
1559WC Heavy-duty Roller Latch 59.00 60.00 55.00 59.00 46.00 74.00With ASA Strike
1559A Cast Strike 27.75 27.75 27.00 27.75 22.00 34.75For use with 1559W and 1554
1559B T-Strike 22.00 22.00 19.75 22.00 16.25 27.50For use with 1559W
1559C ASA Strike 26.75 26.75 24.75 26.75 20.75 33.25For use with 1559W and 1554
1559BL Roller Latch with Angle Stop 103.00 103.00 91.00 103.00 76.00 129.00 and Modified "A" Strike
1562A Push/Pull Latchset 260.00 319.00 539.00 399.00Both Levers Down5" Backset x 2-3/4" T-Strike (Standard)
1562L Privacy Push/Pull Latchset - Locking 371.00 382.00 477.00Both Levers DownStandard: 5" Backset x 2-3/4" T-Strike
1562HL Passage Push/Pull Latchset - Horizontal 371.00 382.00 477.00Levers HorizontalStandard: 5" Backset x 2-3/4" T-Strike
Note(s): Specify handing, latch and strike when ordering.Latch: Standard 5" (1505); Optional: 3-3/4" (1503) and 2-3/4" (1502)Strike: Standard T-Strike (3651); Optional: ASA Strike (3652) add $6.00 LISTEngraving: "P" Suffix (i.e. 1562AP) add $25.00 LISTLead Lined Escutcheon Plate (1592LLE) add $126 LISTLead Lined Latch Tube (1592LLT) add $126 LISTAvailable in Bactericidal Copper (Finish Code 710CU):
15
156156156
46
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1562 Mortise Push/Pull LatchsetBoth Levers Down Note(s):2-3/4" Backset Must specify handing, mortise lock type and function.ASA Strike 2 year Limited Warranty
Available in Bactericidal Copper (Finish Code 710CU): Engraving: "P" Suffix (i.e. 1562B10-P) add $25.00 LIST
Lock Type (Y):B - BEST (additional costs)Q - PDQM - Corbin Russwin (additional cos
Handing (ZZ):RH - Right HandLH - Left Hand
Q-PDQ: Pricing & Functions (YY)10 - Passage 752.00 752.00 1,270.00 941.00 30 - Privacy 830.00 830.00 1,400.00 1,037.00 51 - Entrance/Office 752.00 752.00 1,270.00 941.00 55 - Classroom 830.00 830.00 1,400.00 1,037.00 57 - Storeroom/Closet 830.00 830.00 1,400.00 1,037.00 60 - Privacy 830.00 830.00 1,400.00 1,037.00 72 - Classroom Security 830.00 830.00 1,400.00 1,037.00
B-BEST & M-Corbin Russwin: Pricing & Functions (YY)10 - Passage 1,089.00 1,089.00 1,607.00 1,362.0030 - Privacy 1,114.00 1,114.00 1,685.00 1,392.0051 - Entrance/Office 1,090.00 1,090.00 1,608.00 1,364.0055 - Classroom 1,064.00 1,064.00 1,635.00 1,330.0057 - Storeroom/Closet 1,064.00 1,064.00 1,635.00 1,330.0060 - Privacy 1,067.00 1,067.00 1,637.00 1,333.0072 - Classroom Security 1,067.00 1,067.00 1,637.00 1,333.00
1562AE Exit/Entrance Push/Pull Latchset 224.00 266.00 451.00 333.00Lever Down, One Side OnlyStandard: 5" Backset x 2-3/4" T-Strike
Note(s): Specify handing, latch and strike when ordering.Latch: Standard 5" (1505); Optional: 3-3/4" (1503) and 2-3/4" (1502)Strike: Standard T-Strike (3651); Optional: ASA Strike (3652) add $6.00 LISTEngraving: "P" Suffix (i.e. 1562AP) add $25.00 LISTLead Lined Escutcheon Plate (1592LLE) add $126 LISTLead Lined Latch Tube (1592LLT) add $126 LISTAvailable in Bactericidal Copper (Finish Code 710CU):
1563A Push/Pull Latchset 261.00 319.00 539.00 399.00Both Levers UpStandard: 5" Backset x 2-3/4" T-Strike
Note(s): Specify handing, latch and strike when ordering.Latch: Standard 5" (1505); Optional: 3-3/4" (1503) and 2-3/4" (1502)Strike: Standard T-Strike (3651); Optional: ASA Strike (3652) add $6.00 LISTEngraving: "P" Suffix (i.e. 1562AP) add $25.00 LISTLead Lined Escutcheon Plate (1592LLE) add $126 LISTLead Lined Latch Tube (1592LLT) add $126 LISTAvailable in Bactericidal Copper (Finish Code 710CU):
1580A Push/Pull Latchset 261.00 319.00 539.00 399.00Push Lever Up, Pull Lever DownStandard: 5" Backset x 2-3/4" T-Strike
Note(s): Specify handing, latch and strike when ordering.Latch: Standard 5" (1505); Optional: 3-3/4" (1503) and 2-3/4" (1502)Strike: Standard T-Strike (3651); Optional: ASA Strike (3652) add $6.00 LISTEngraving: "P" Suffix (i.e. 1562AP) add $25.00 LISTLead Lined Escutcheon Plate (1592LLE) add $126 LISTLead Lined Latch Tube (1592LLT) add $126 LISTAvailable in Bactericidal Copper (Finish Code 710CU):
See Left for Details: X (lock type), YY (function) & ZZ (handing)
To Order: 1562XYY-ZZ
1
L
47
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1581A Push/Pull Latchset 261.00 319.00 539.00 399.00Push Lever Down, Pull Lever UpStandard: 5" Backset x 2-3/4" T-Strike
Note(s): Specify handing, latch and strike when ordering.Latch: Standard 5" (1505); Optional: 3-3/4" (1503) and 2-3/4" (1502)Strike: Standard T-Strike (3651); Optional: ASA Strike (3652) add $6.00 LISTEngraving: "P" Suffix (i.e. 1562AP) add $25.00 LISTLead Lined Escutcheon Plate (1592LLE) add $126 LISTLead Lined Latch Tube (1592LLT) add $126 LISTAvailable in Bactericidal Copper (Finish Code 710CU):
1591A Push Latchset - Push to Latch 425.00 446.00 754.00 559.00Lever Down, One Side OnlyStandard: 5" Backset x 2-3/4" T-Strike
1591B Pull Latchset - Pull to Latch 425.00 446.00 754.00 559.00Lever Down, One Side OnlyStandard: 5" Backset x 2-3/4" T-Strike
Note(s): Latch: Standard 5" (1505); Optional: 3-3/4" (1503) and 2-3/4" (1502)Strike: Standard T-Strike (3651); Optional: ASA Strike (3652) add $6.00 LISTEngraving: "P" Suffix (i.e. 1562AP) add $25.00 LISTLead Lined Escutcheon Plate (1592LLE) add $126 LISTLead Lined Latch Tube (1592LLT) add $126 LISTAvailable in Bactericidal Copper (Finish Code 710CU):
1592LLE Lead Lined Escutcheon Plates (Set of 2) 126.00For the 1500 Series Push/Pull Latchsets Lead only
1592LLT Lead Lined Latch Tube 126.00For the 1500 Series Push/Pull Latchsets Lead only
1593RK Replacement Kit 131.00 131.00 131.00 125.00 163.00Kit for adaptation of 1500 series Push/Pull
Strike Only 82.00 82.00 102.00
1630 Push Bar 3/8" x 2-1/2" 433.00 433.00 433.00 433.00 423.00 541.00
1630B Push Bar 3/8" x 2-1/2" 909.00 909.00 899.00 909.00 899.00 1,122.00BTB (Pair)
Note(s): Specify center-to-center when ordering.All Push Bar Sets and Push/Pull Sets are priced up to 34" ctc.Add $15.50 LIST for each additional inch over 34" ctc.
1633 Push Bar 3/8" x 2-1/2" 411.00 411.00 411.00 411.00 401.00 514.00
Note(s): Specify center-to-center when ordering.All Push Bar Sets and Push/Pull Sets are priced up to 34" ctc.Add $15.50 LIST for each additional inch over 34" ctc.
1633-1 Lever Handle Protector 255.00 255.00 255.00 255.00 250.00 318.003/8" x 1-1/2" x 14" ctc
1637 Push Bar 3/8" x 1-1/4" 411.00 411.00 411.00 411.00 411.00 514.00
J1637 "J" Hook Only: 1637 Push Bar (1 End) 8.70
Note(s): Specify center-to-center when ordering.All Push Bar Sets and Push/Pull Sets are priced up to 34" ctc.Add $16.50 LIST for each additional inch over 34" ctc.
48
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1642 5/8" dia. Push Bar Set 347.00 347.00 347.00 347.00 347.00 585.00 433.002 Bar SetBrackets - 5/8" x 5"
1643 5/8" dia. Push Bar Set 411.00 411.00 411.00 411.00 411.00 695.00 514.003 Bar SetBrackets - 5/8" x 8"
1644 5/8" dia. Push Bar Set 498.00 498.00 498.00 498.00 498.00 840.00 623.004 Bar SetBrackets - 5/8" x 11"
Note(s): Specify center-to-center when ordering.All Push Bar Sets and Push/Pull Sets are priced up to 34" ctc.Add $16.50 LIST for each additional inch over 34" ctc.
1661 1" dia. Push Bar 380.00 380.00 380.00 380.00 380.00 639.00 473.00
1662 1" dia. Push Bar 822.00 822.00 822.00 822.00 822.00 1388.00 1,028.002 Bar Set
Note(s): Specify center-to-center when ordering.All Push Bar Sets and Push/Pull Sets are priced up to 34" ctc.Add $16.50 LIST for each additional inch over 34" ctc.
49
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1698 Push Bar 3/8" x 2-1/2" 520.00 520.00 489.00 489.00 520.00 476.00 650.00
Note(s): Specify center-to-center when ordering.All Push Bar Sets and Push/Pull Sets are priced up to 34" ctc.Add $16.50 LIST for each additional inch over 34" ctc.
1729 3/4" dia. Push/Pull Bar Set 358.00 358.00 358.00 358.00 358.00 347.00 358.00 358.00 448.0010" ctc Straight Pull
1731 1" dia. Push/Pull Bar Set 390.00 390.00 390.00 390.00 390.00 380.00 390.00 390.00 487.0010" ctc Straight Pull
1732 1" dia. Push/Pull Bar Set 444.00 444.00 444.00 444.00 444.00 466.00 444.00 444.00 581.0012" ctc Straight Pull
1737 1" dia. 90º Offset Push/Pull Bar Set 488.00 488.00 488.00 488.00 476.00 466.00 488.00 476.00 609.0010" ctc Offset Pull
1738 1" dia. 90º Offset Push/Pull Bar Set 498.00 498.00 498.00 498.00 488.00 476.00 498.00 488.00 623.0012" ctc Offset Pull
1740 3/4" dia. Push Bar 282.00 282.00 282.00 282.00 271.00 265.00 282.00 191.00 352.00E Mounting Standard
1741 1" dia. Push Bar 303.00 303.00 303.00 303.00 293.00 287.00 303.00 234.00 380.00E Mounting Standard
1745 1-1/4" dia. Push Bar 347.00 347.00 347.00 347.00 347.00 336.00 347.00 325.00 433.00E Mounting Standard
1746 1-1/4" dia. Push/Pull Bar Set 682.00 682.00 682.00 682.00 682.00 649.00 682.00 682.00 812.0018" ctc Straight Pull
1746-1 1-1/4" dia. Push/Pull Bar Set 639.00 639.00 639.00 639.00 628.00 617.00 639.00 628.00 761.0012" ctc Straight Pull
1747 1-1/4" dia. 90º Offset Push/Pull Bar Set 682.00 682.00 682.00 682.00 682.00 661.00 682.00 682.00 852.0018" ctc Offset Pull
1747-1 1-1/4" dia. 90º Offset Push/Pull Bar Set 661.00 661.00 661.00 661.00 661.00 661.00 661.00 649.00 826.0012" ctc Offset Pull
Note(s): Specify Push Bar center-to-center when ordering.All Push Bar Sets and Push/Pull Sets are priced up to 34" ctc.Add $13.00 LIST for each additional inch over 34" ctc.E & G mounting 1-3/4" thick wood or metal door. Concealed mounting, specify door type.fOCAL Desiger Option: Add $35.00 LIST
1748 3/4" dia. "C" Shaped Offset Door 240.00 240.00 240.00 240.00 240.00 235.00 240.00 240.00 300.0012" ctc Pull
1748-1 1" dia. "C" Shaped Offset Door 307.00 307.00 307.00 307.00 296.00 290.00 307.00 296.00 384.0012" ctc Pull
Note(s): 1748 Series pulls are covered by warranty if ordered w/ BP4 Back Plates & L or M Mounting
1802-4 Pull Plate 4" x 16" 244.00 244.00 244.00 244.00 244.00 217.00 305.006" CTC Pull (1"x3/8" bar)
Round
Round
Round
Push Bar w/Straight Pull
Push Bar w/Offset Pull
Push Bar
Round
50
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1802-25 Pull Plate 4" x 25" 279.00 279.00 269.00 279.00 239.00 348.00Options: PL - Engraved "PULL" (i.e. 1802-25PL) 26.25
PH - Engraved "PUSH" (i.e. 1802-25PH) 26.25CC - 1-1/4" dia. Cutout (i.e. 1802-25CC-PL) 12.60CD - 2-1/8" dia. Cutout (i.e. 1802-25CD-PH) 12.60
1804-4 Pull Plate 4" x 16" 302.00 302.00 228.00 302.00 194.00 376.005" ctc Pull
1807-4 Push Plate 4" x 16" 116.00 116.00 75.00 116.00 63.00 196.00 145.00Rounded Bevel Top & Bottom Edges
1807-25 Push Plate 4" x 25" 196.00 196.00 125.00 196.00 107.00 333.00 247.00Rounded Bevel Top & Bottom Edges
1809-4 Push Plate 4" x 16" 152.00 152.00 99.00 152.00 84.00 256.00 189.00B4E
1820 Push/Pull Plate 3-1/2" x 16-1/2" 96.00 96.00 56.00 96.00 47.25 136.00 119.00
1820-11 Push/Pull Plate 8" x 16-1/2" 170.00 170.00 155.00 170.00 131.00 285.00 212.00
1822 Cylinder Pull - 1-1/4" dia. opening 73.00 73.00 47.25 73.00 39.75 105.00 91.002" x 3-3/4"
1822-1 Cylinder Pull 68.25 68.25 54.00 69.00 45.00 99.00 86.00No Cutout--Screw Mount
1822-2 Cylinder Pull - 2-1/4" dia. opening 86.00 86.00 77.00 86.00 65.00 144.00 108.00Adhesive Mount
With Anti-Rotation Pin, Add: 17.50 17.50 17.50 17.50 17.00 22.25
Manufactured with Bactericidal Copper:
1835-2 Push/Pull Plate Combo 255.00 595.003-1/2" x 15" Plate6" ctc Ultimate Restroom PullRounded Bevel Top & Bottom Edges
1835-3 Push/Pull Plate Combo 255.00 595.004" x 16" Plate6" ctc Ultimate Restroom PullRounded Bevel Top & Bottom Edges
Note(s): For 630TG antimicrobial coating, add 30% to the 630 price
THE ULTIMATE RESTROOM PULL
51
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
1894-3 Push/Pull Plate Combo 348.00 348.00 234.00 348.00 199.00 586.00 434.003-1/2" x 15" with 3/4" dia. 6" ctc PullRounded Bevel Top & Bottom Edges
1894-3B Push/Pull Plate Combo 348.00 348.00 234.00 348.00 199.00 586.00 434.003-1/2" x 15" with 3/4" dia. 8" ctc Pull Rounded Bevel Top & Bottom Edges
1894-4 Push/Pull Plate Combo 348.00 348.00 234.00 348.00 199.00 586.00 434.004" x 16" with 3/4" dia. 6" ctc PullRounded Bevel Top & Bottom Edges
1894-4B Push/Pull Plate Combo 348.00 348.00 234.00 348.00 199.00 586.00 434.00 4" x 16" with 3/4" dia. 8" ctc Pull Rounded Bevel Top & Bottom Edges
1895-3 Push/Pull Plate Combo 371.00 371.00 302.00 371.00 257.00 625.00 464.003-1/2" x 15" with 1" dia. 8" ctc PullRounded Bevel Top & Bottom Edges
1895-3B Push/Pull Plate Combo 371.00 371.00 302.00 371.00 257.00 625.00 464.003-1/2" x 15" with 1" dia. 10" ctc Pull .Rounded Bevel Top & Bottom Edges
1895-4 Push/Pull Plate Combo 371.00 371.00 302.00 371.00 257.00 625.00 464.004" x 16" with 1" dia. 8" ctc PullRounded Bevel Top & Bottom Edges
1895-4B Push/Pull Plate Combo 429.00 429.00 313.00 429.00 267.00 869.00 644.004" x 16" with 1" dia. 10" ctc PullRounded Bevel Top & Bottom Edges
1896-4B Push/Pull Plate 464.00 464.00 348.00 464.00 296.00 784.00 610.004" x 16" Grip 10" CC 1" dia with Rounded Bevel Top & Bottom Edges
2082 Mail Plate SetSpring Type Front Plate & Inside FrameAdd "V" to Product for Vertical Mounting
2085 Mail Plate SetInside Hood
2091 Mail Slot Sleeve DISCONTINUED
DISCONTINUED
DISCONTINUED
3/4" Round
1" Round
52
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
3070-1 Coat & Hat Hook 14.25 14.50 15.00 14.25 18.75
3071 Coat Hook - 5-1/2" High 57.00 57.00 57.00 57.00 57.00 38.50 72.00
3071-1 Coat Hook - 4-1/2" High 57.00 57.00 57.00 57.00 57.00 38.50 72.00
3072 Coat Hook 74.00 89.00 64.00 149.00 111.00
3090 Carry Open Bar Assembly 68.00 68.00 68.00 68.00 85.00
3092 UL Retracting Arm Coordinator 206.00Note(s): Not for uneven doors or even doors under 36" width Black
Othe finishes available. Call to inquire.
3093 UL Drop Arm Coordinator 163.00 163.00 163.00 103.00 203.00
3094A2 UL Stop Mounted Coordinator - 32" 175.00 160.0043" - 53" Opening, includes filler bar 689 Black
3094B1 UL Stop Mounted Coordinator - 52" 175.00 160.0053" - 63" Opening, includes filler bar 689 Black
3094B2 UL Stop Mounted Coordinator - 52" 175.00 160.0063" - 75" Opening, includes filler bar 689 Black
3094B3 UL Stop Mounted Coordinator - 52" 175.00 160.0075" - 87" Opening, includes filler bar 689 Black
3094B4 UL Stop Mounted Coordinator - 52" 175.00 160.0087" - 95" Opening, includes filler bar 689 Black
3094C4 UL Stop Mounted Coordinator - 60" 191.00 176.0095" - 107" Opening, includes filler bar 689 Black
3094D UL Stop Mounted Coordinator 366.00 351.00For use with uneven pair of doors 689 Black
Specify door opening size
3094-2 Filler Bar Only - 24" 54.00 43.50689 Black
3095 UL Steel Mounting Bracket 45.00 32.50Stop width 7/8" to 2-1/4" 689 Black
3096 UL Steel Mounting Bracket 45.00 32.50Stop width over 2-1/4" 689 Black
Note(s): All 3094's except 3094D are for even pairs of doors ONLY.Add $65.00 LIST for special prep.Standard finishes: Black and 689 Aluminum Paint. Other finishes also available. Call to inquire.For Coordinators cut for exit devices, specify opening width, exit device manufacturer, active door width and stop dimensions if other than 5/8".
3405 Handrail Bracket 107.00 107.00 107.00 107.00 106.00 103.00 133.00
3406 Handrail Bracket 107.00 107.00 107.00 107.00 106.00 103.00 133.00
53
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
3651 2-3/4" T-Strike (A115.3) 30.50 30.50 30.50 9.50 38.00
3652 4-7/8" ASA Strike (A115.2) 36.00 36.00 36.00 11.40 44.75
3810 UL Automatic Flushbolt 92.00 95.00 95.00 103.00 91.00 103.00 91.00 129.00Metal Doors
3810x3810 UL Automatic Flushbolt 184.00 189.00 189.00 205.00 181.00 205.00 181.00 257.00Metal Doors
3810x3850 UL Automatic Flushbolt with Fire Bolt 184.00 189.00 189.00 205.00 181.00 205.00 181.00 257.00Metal Doors
3820 UL Semi-Automatic Flushbolt 92.00 95.00 95.00 103.00 91.00 103.00 91.00 129.00Metal Doors
3820x3810 UL Semi-Automatic Flushbolt 184.00 189.00 189.00 205.00 181.00 205.00 181.00 257.00Metal Doors
3820x3850 UL Semi-Automatic Flushbolt with Fire Bolt 184.00 189.00 189.00 205.00 181.00 205.00 181.00 257.00Metal Doors
3815L UL Automatic Flushbolt 105.00 109.00 109.00 119.00 103.00 119.00 103.00 149.00Wood Doors
3815Lx3815L UL Automatic Flushbolt 210.00 216.00 216.00 237.00 206.00 237.00 206.00 297.00Wood Doors
3815Lx3850 UL Automatic Flushbolt with Fire Bolt 210.00 216.00 216.00 237.00 206.00 237.00 206.00 297.00Wood Doors
3825L UL Semi-Automatic Flushbolt 105.00 109.00 109.00 119.00 103.00 119.00 103.00 149.00Wood Doors
3825Lx3815L UL Semi-Automatic Flushbolt 210.00 216.00 216.00 237.00 206.00 237.00 206.00 297.00Wood Doors
3825Lx3850 UL Semi-Automatic Flushbolt with Fire Bolt 210.00 216.00 216.00 237.00 206.00 237.00 206.00 297.00Wood Doors
3830A Finish Kit Only 34.25 34.25 34.25 38.00 33.00 38.00 33.00 47.50Automatic Flushbolts
3830AL Long Finish Kit Only 34.25 34.25 34.25 38.00 33.00 38.00 33.00 47.50Automatic Flushbolts
3830M Finish Kit Only 34.25 34.25 34.25 38.00 33.00 38.00 33.00 47.50Semi-Automatic Flushbolt - Metal Door
3830WL Long Finish Kit Only 34.25 34.25 34.25 38.00 33.00 38.00 33.00 47.50Semi-Automatic Flushbolt - Wood Door
3850 Fire Bolt - Edge Mount (630 Only) 134.00
3900 Dubl-Bolt - Two Point Flushbolt 336.00 336.00 336.00 336.00 330.00 420.00Used on Inactive LeafSpecify Door Type, Height and Strike Type
BACK BY POPULAR DEMAND!
381
38
54
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
3910 Dust Proof Strike 28.25 28.25 28.25 28.25 22.00 28.25 22.00 35.75
3910N Dust Proof Strike 23.25 23.25 23.25 23.25 18.75 23.25 18.75 29.50 with No Face Plate
3911 Adjustable Dust Proof Strike 34.75 34.75 34.75 34.75 28.25 34.75 28.25 44.25
3913 UL Manual Flushbolt 41.00 41.00 41.00 41.00 33.50 51.501" x 6-3/4" x 3/4" throwWood Door
W3913 UL Wrought Manual Flushbolt 35.75 35.75 35.75 35.75 30.00 45.251" x 6-3/4" x 3/4" throwWood Door
3915 UL Manual Flushbolt 53.00 53.00 53.00 53.00 39.00 67.001-1/4" x 6-3/4" x 11/16" throw12" Rod StandardMetal Door
3916 Manual Flushbolt 247.00 247.00 247.00 247.00 196.00 309.001" x 15-1/2" x 5/8" throwAvailable up to 40" in LengthAdd per inch over 15-1/2" 5.50 5.50 5.50 5.50 5.40 7.40Wood Door
3917-12 UL Manual Flushbolt - 12" 29.50 29.50 29.50 34.75 23.25 44.251" x 6-3/4" x 11/16" throwMetal Door
3917-18 UL Manual Flushbolt - 18" 45.75 45.75 45.75 51.00 39.25 56.00
3917-24 UL Manual Flushbolt - 24" 46.25 46.25 46.25 52.00 39.75 57.00
3917-36 UL Manual Flushbolt - 36" 47.25 47.25 47.25 52.50 40.75 58.00
3917-48 UL Manual Flushbolt - 48" 48.50 48.50 48.50 54.00 41.75 59.00
3917-12ET Manual Flushbolt - Extended Throw 41.00 41.00 41.00 41.00 34.00 52.001" x 6-3/4"; Throw 1-1/4"Metal Door
W3917-12 UL Wrought Manual Flushbolt - 12" 28.25 28.25 28.25 28.25 22.00 35.751" x 6-3/4" x 11/16" throwMetal Door
W3917-18 UL Wrought Manual Flushbolt - 18" 44.75 44.75 44.75 50.00 38.25 55.00
W3917-24 UL Wrought Manual Flushbolt - 24" 45.25 45.25 45.25 51.00 38.75 56.00
W3917-36 UL Wrought Manual Flushbolt - 36" 46.25 46.25 46.25 52.00 39.75 57.00
W3917-48 UL Wrought Manual Flushbolt - 48" 47.25 47.25 47.25 52.50 40.75 58.00
3917-1B 1-1/2" Long Bolthead for the 3917 (Steel) 14.20
3917-3B 3" Long Bolthead for the 3917 (Steel) 14.20
55
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
3920-4 Heavy-Duty Surface Bolt 34.75 48.75 48.75 34.00 61.00Dutch Door Bolt4-1/4" Long
3920-8 8" Long with Universal Strike 48.25 70.00 70.00 47.25 87.00
3920-8M 8" Long with Mortise Strike 48.25 70.00 70.00 47.25 87.00
3920-8A 8" Long with Angle Strike 48.25 70.00 70.00 47.25 87.00
Add per inch if over 8" 11.10 13.20 10.90 16.50
Note(s): Supplied with Universal Strike. Specify if Angle or Mortise Strike is needed.
3921-8 Heavy-duty Surface Bolt 116.00 116.00 116.00 93.00 145.008" long with Decorative Knob
3921-12 Heavy-duty Surface Bolt 155.00 155.00 155.00 125.00 194.0012" long with Decorative Knob
3921-18 Heavy-duty Surface Bolt 166.00 166.00 166.00 142.00 207.0018" long with Decorative Knob
3921-24 Heavy-duty Surface Bolt 177.00 177.00 177.00 152.00 221.0024" long with Decorative Knob
Add per inch over 24" 12.10 14.20 14.20 11.90 19.00
Note(s): Supplied with Universal Strike. Specify if Angle or Mortise Strike is needed.Angle Strike (3920-3A), Mortise Strike (39201M) and Universal Strike (3920-1U)
3922 UL Heavy-duty Surface Bolt 63.00 39.00 78.00 68.00 49.758" Long 603 only
3923 UL Heavy-duty Surface Bolt 77.00 77.00 50.00 80.00 64.0012" Long 603 only
Add per inch over 12" 14.20 14.20 14.00 17.00 20.00603 only
3922L Heavy-duty Locking Surface Bolt 182.00 108.00 188.00 168.00 214.00Locking "B" - 8"Padlock by OthersTorx Screws Specify SMS or MS
3928K Cremone Bolt with Knob 1,390.00 1,390.00 1,390.00 1,353.00 1,737.00Up to 90"
3928L Cremone Bolt with Lever 1,390.00 1,390.00 1,390.00 1,353.00 1,737.00Up to 90", Specify HandingAdd for each addition 6" over 90" 100.00 100.00 100.00 98.00 125.00
3999 Flushbolt - 6" 13.40 13.40 13.40 11.90 17.00Corner MountRounded End
3999SE Flushbolt - 6" 13.40 13.40 13.40 11.90 17.00Corner MountSquare End
Angle
Mortise
Universal
Angle
Mortise
Universal
56
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
4015 Chain Door Guard 10.00 19.25 17.00 19.25 23.75
4016 Swing Arm Door Guard 34.00 39.50 39.50 39.50 34.00 49.75
4016-ED Edge Protector 8.20 10.60 10.60 10.60 8.20 14.50 with Adhesive TapeMinimum order 30 Pieces
4016S Spacer 18.50Black Nylon ONLY
Note(s): Specify screw finish & spacer size (1/8", 1/4", 3/8", 5/8", 3/4", 7/8")
4017 Security Door Guard 45.00 45.00 45.00 32.00 57.00
4017-ED Edge Protector (1-1/2" x 2") 11.10 14.30 14.30 14.30 11.10 19.30 with Adhesive Tape
4017-ET Emergency Tool for Security Door Guard 8.00
4017-HO Hold Open Tool for Security Door Guard 8.00
4048 Chain Crash Stop (603 only) 44.75
4872 2" Surface Bolt 13.20 13.20 16.00 13.20 20.75
4873 3" Surface Bolt 13.20 14.70 16.00 13.20 20.75
4874 4" Surface Bolt 15.00 16.25 18.00 15.00 22.75
4876 6" Surface Bolt 18.00 19.50 21.25 18.25 27.25
4882 12" Surface Bolt 26.25 30.50 33.00 26.25 42.25
Add per inch over 12" 9.00 9.00 9.00 9.00 12.00Max Height - 48"
5000-T Lock Astragal - Cast 72.00 72.00 72.00 72.00 55.00 89.001-7/8" x 9-1/2"Use with Mortise Lock (1-1/2" lip strike)
5001 Lock Astragal 35.50 Stainless Steel Use with Mortise or Cylindrical Locks
5002 Lock Astragal 32.50Stainless SteelUse with Cylindrical Locks1-9/16" x 6"
5004 Mortise Lock Status Indicator 340.00 425.00Locked or UnlockedSpecify Mortise Lock Manufacturer$50.00 set-up charge for orders <5 pieces
Note(s): 5004 order form required.
5022 Unit Lock to Cylindrical Lock Filler 320.00 255.00 399.00
5022A Unit Lock to Cylindrical Lock Filler 320.00 255.00 399.00With Astragal
57
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
fOCAL Notes:fOCAL products are made to order and are not returnable.Many products can be made to the fOCAL styling:
Pulls/Grips add $35.00 LISTPush/Pull Bar Sets add $35.00 LIST
7001 fOCAL Push Plate - 4" x 16" 62.00 62.00 62.00 62.00 60.00 59.00 62.00 60.00 104.00 77.00No Screw Holes x Adhesive Mounting
7009 fOCAL Push Plate - 6" x 16"No Screw Holes x Adhesive Mounting 73.00 73.00 73.00 73.00 73.00 73.00 73.00 123.00 91.00
7010 fOCAL Robe Hook & Stop 50.00 52.00 52.00 56.00 49.50 73.00 73.00 91.00
7059 fOCAL Round Flush Cup 63.00 63.00 63.00 69.00 69.00 86.00
7060 fOCAL Flush Pull - Large 81.00 94.00 90.00 90.00 80.00 159.00 118.00
7061 fOCAL Flush Pull -Small 69.00 73.00 72.00 72.00 69.00 129.00 95.00
7140 fOCAL 3/4" dia. "D" Pull 152.00 152.00 152.00 152.00 146.00 152.00 146.00 256.00 190.006" ctc with 3" x 12" Plate
7140S fOCAL 3/4" dia. "D" Pull 152.00 152.00 152.00 152.00 146.00 152.00 146.00 256.00 190.006" ctc with Black Style Back Plates
7141 fOCAL 3/4" dia. "D" Pull 170.00 169.05 169.05 169.05 162.00 170.00 162.00 285.00 212.008" ctc with 3" x 12" Plate
7141S fOCAL 3/4" dia. "D" Pull 162.00 162.00 162.00 162.00 162.00 162.00 157.00 323.00 233.008" ctc with Black Style Back Plates
7150 fOCAL 1" dia. Cane Pull 429.00 429.00 429.00 429.00 429.00 429.00 537.0010" ctc x 3/4" dia. Post
Note(s): Custom lengths available by quoteSee Page vi for mounting chartBTB available
7160 fOCAL 1" dia. Offset Cane Pull 556.00 556.00 556.00 545.00 556.00 545.00 696.0010" ctc x 3/4" Post
Note(s): Specify HandingCustom lengths available by quoteSee Page vi for mounting chartBTB available
7170 fOCAL 1" dia. Wing Pull 313.00 313.00 313.00 313.00 272.00 392.0010" ctc
Note(s): BTB Available
58
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
7196-1 fOCAL Cool Touch Pull with PVC 168.00 168.00 168.00 162.00 185.00 162.00 233.008" ctc
7196-2 fOCAL Cool Touch Pull with PVC 168.00 168.00 168.00 162.00 185.00 162.00 233.0010" ctc
7196-3 fOCAL Cool Touch Pull with PVC 168.00 168.00 168.00 162.00 185.00 162.00 233.0012" ctc
Note(s): BTB Available
7208 fOCAL Pencil Stop 36.50 36.50 36.50 36.50 36.50 58.00
7276 fOCAL Cast Wall Stop 31.00 31.00 31.00 31.00 30.00 39.00Concave-Black Rubber
W7276 fOCAL Wrought Wall Stop 24.25 24.25 24.25 24.25 24.00 30.50Concave-Black Rubber
7278 fOCAL Décor Wall Stop 30.50 30.50 30.50 30.50 30.00 38.75Concave-Black Rubber
7280 fOCAL Floor Stop - Small 62.00 62.00 62.00 62.00 59.00 62.00 59.00 77.001-1/4" dia.
7281 fOCAL Floor Stop - Large 92.00 92.00 92.00 92.00 89.00 92.00 89.00 115.001-3/4" dia.Contact factory for wood floor prep.
7285 fOCAL Floor Stop & Holder 162.00 162.00 162.00 162.00 154.00 162.00 154.00 203.00Large with Bail and Hook1-3/4" dia.Contact factory for wood floor prep.
FG8000-24 Frame Protector 24" Overall Length 401.00Spins when an object hits the bar
FG8000-36 Frame Protector 36" Overall Length 488.00
FG8000-42 Frame Protector 42" Overall Length 531.00
PBT8000-1-18 Push Bar Trim Cover for Exit Devices 168.00Von Duprin 98/99 36" Device
PBT8000-1-24 Push Bar Trim cover for Exit Devices 168.00Von Duprin 98/98 - 48" Device
PBT8000-2 Push Bar Trim Cover for Exit Devices 168.00Stanley Apex 2000
59
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
PG8000 Panic Guard 265.00 265.00 265.00 255.00 331.0010" High
PG8002 Panic Guard Combination 718.00 718.00 718.00 693.00 896.001 - Piece10" High x up to 34" Wide
PG8002-1 Panic Guard Combination 419.00 419.00 419.00 411.00 524.002 - Piece10" High x up to 34" Wide
Per Inch over 34" Wide 11.10 11.10 11.10 10.90 14.50
PG8125VV-1 Universal Panic Guard 223.008" long18 Gauge
PG8125VV-4 Universal Panic Guard 213.00 4" long18 Gauge
9560 Offset Entrance Door Pull10" ctcAluminum Pull x Aluminum Insert
9561 Offset Entrance Door Pull10" ctcAluminum Pull x Black Insert
T-Print T-Print Custom Logo PullsMinimum orders may apply.
9550-TP Extruded Economy T- Print Pull Call for Quote6"x9" - standard CTC 7"One color included
9570-TP Premium T-Print Pull Call for Quote5" x 9" - standard CTC 7" Two colors included
9590-TP Boutique Custom T- Print Pull Call for Quote5" x 9" - Larger sizes availableThree colors included
DISCONTINUED
DISCONTINUED
9561 Shown
PG81
60
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
Lever Design Tubular Passg.
Tubular Privacy
Full Dummy *
Single Dummy *
Merryvale 166.00 166.00 142.00 71.00
Frankfurt 127.00 127.00 89.50 45.25
Munich 127.00 127.00 89.50 45.25
Stockholm 127.00 127.00 89.50 45.25
Specify Handing, Backset (2-3/8" or 2-3/4"), Function (Pass. or Priv.) and Door ThicknessSingle & Full Dummy Trims are supplied as rigid mounted levers, unless specified otherwise.
Lever Design
Merryvale
Frankfurt
Munich
Stockholm
Door Cap
Note(s): Heavy-duty door cap for use with flush bolts and concealed vertical rod exit devices.Reinforces doors (top and/or bottom) damaged from high use and abuse.Durable .050" construction.Can be produced to work with any manufacturers flush bolts or CVR devices.Easy installation requires no special tools or removal of the hardware from the door.For use with both beveled and non-beveled doors.Order form available at www.trimcohardware.com.
T-Etch Protection Plates T-Etch Protection Plates - .050"Monochrome
Color Infill CALL FOR PROJECT QUOTE1 Color (per color, per plate)Additional Infill Colors (per color, per plate)
Note(s): Order form and Logo Authorization Form available online at www.trimcohardware.com
90SC051 563.00 563.00
90ST002 519.00 519.00
Store Door Q14
P/N
81SC051
81ST002
81ST001
81ST000
P/N EntryQ10
90ST001 519.00 519.00
90ST000 519.00 519.00
DC Series CALL FOR QUOTE
61
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
Door Protection Plate Notes
1 All odd sizes rounded up to the nearest even inch on both height and width.2 Lot Charge for small lots may apply to the special finishes.3 All Door Protection Plates are priced per 100 square inches, with standard Pencil Beveled edges. 4 We can recommend but not guarantee glue for use with kick plates and edge guards.5 Special bends on kick, mop or armor plates will be quoted.6 Diamond pattern available. 628 finish only. Inquire for pricing.
Less than 5 kick plates: $5.00 NET Adhesive Tape $19.00 LIST - Kick Plate; $35.00 LIST - Armor PlateLess than 3 armor plates: $15.00 NET UL Rating $10.00 LIST per plate (label) - Specify UL
Countersunk Holes $15.00 LIST - Kick Plate; $20.00 LIST - Armor Plate $20.00 LIST per plate (stamp) - Specify ULSHeavy Bevel Edges $15.00 LIST - Kick Plate; $20.00 LIST - Armor Plate RC - Radius Corners $30.00 LIST per plate
KA038 Armor Plate .038 Material 17.2518" to 36" in Height
KM038 Mop Plate .038 Material 18.505"-6" in Height
K0038 Kick Plate .038 Material 17.257" to 16" in Height
KA050 Armor Plate .050 Material 59.00 59.00 26.25 59.00 17.25 99.00 73.0017" to 48" in HeightMaximum height available:605 - 24"; 606/609 - 36"; 611/612/613 - 36"
KM050 Mop Plate .050 Material 61.00 61.00 28.00 61.00 18.50 94.50 76.006" and under in Height
K0050 Kick Plate .050 Material 59.00 59.00 26.25 59.00 17.25 99.00 73.007" to 16" in Height
KS050 Stretcher Plate .050 Material 65.00 65.00 34.75 65.00 22.75 135.00 100.00Countersunk, Oval Head ScrewsHeavy B4E
KH050 Kick Plate - Handicap .050 Material 358.00To Cover Glass on Narrow StileAluminum Doors
Packaging Charges
62
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
K6000 Plastic Kick Plates 1/8" Material4" to 48" in Height - Black 11.604" to 48" in Height - Nubia Brown 12.404" to 48" in Height - Clear Plastic 12.904" to 48" in Height - Khaki Brown, Beige, Grey (1500N-60), Dove Grey and Frosty White 15.25
Self-illuminated "EXIT" sign - 10" x 34", 630, .050"
1 to 10 pieces 326.0011 to 29 pieces 306.0030+ pieces 290.00
Note(s): Available screw or adhesive mount. Specify when ordering.
Edge Guard Notes
1. Trimco's edge guard order form can be found online at www.trimcohardware.com. Order forms required with PO.2. Fasteners: #5 x 5/8" PH FH undercut provided with all edge guards.3. All edge guards with special cut outs or over 42" lentch should be submitted for quotes.4. Packaging charge for <5 edge guards: $20.00 NET5. UL Rating available: Label - $10.00 LIST; Stamp - $20.00 LIST
KE31-1 90º Edge Guard 100.00 100.00 87.00 124.00up to 42" longSpecify mortise or non-mortise
KE32-1 93º Edge Guard 105.00 105.00 105.00 89.00 132.00up to 42" longSpecify mortise or non-mortise
KE33-1 90º Edge Guard 128.00 128.00 128.00 114.00 159.00up to 42" longSpecify mortise or non-mortise
KE33-2 93º Edge Guard 144.00 144.00 125.00 180.00up to 42" longSpecify mortise or non-mortise
KE34-1 Edge Guard - Double Acting Door 177.00 177.00 152.00 221.00up to 42" longSpecify mortise or non-mortise
KE35-1 90º Edge Guard 177.00 177.00 152.00 221.00up to 42" long
KE36-1 93º Edge Guard 155.00 155.00 130.00 194.00up to 42" long
10X34.ILLUM.630
Non-Mortise Shown
Non-Mortise Shown
Mortise Shown
Non-Mortise Shown
Mortise Shown
63
TRIMCO DESCRIPTION 605/606 613 613E/
622 625 626 628 629 630710
Special Finishes
PRICE LIST 20
BOXED PRICES ARE STOCKED IN OCEANSIDE AND AVAILABLE FOR QUICK SHIP.STOCKING LIST FOR OTHER WAREHOUSES ALSO AVAILABLE.
KE37-1 90º Edge Guard-square edged 172.00 172.00 172.00 152.00 214.00up to 42" long
KE37-2 93º Edge Guard-square edged 182.00 182.00 182.00 163.00 227.00up to 42" long
KE38-1 Edge Guard - Double Acting Door 287.00 287.00 238.00 359.00up to 42" long
K39 Finger Guard up to 42" long 299.00 299.00 282.00 387.0060" long maximum Over 42" long by quote only
64