A. ADMINISTRATIVE DETAILS OF THE CASE FOR ... · Web viewCPCCCA3024 Erect and dismantle formwork for footings and slabs on ground New unit Unit replaces CPCCCA2003A - Erect and dismantle

Artibus Innovation373 Elizabeth Street, North HobartTasmania 7000p 03 6218 2841 e [email protected] www.artibus.com.au

© 2017 Commonwealth of Australia

CPCv5.0 Case for Endorsement – Concreting

CPC Construction, Plumbing and Services Training Package

ARTIBUS INNOVATION

CPC Construction, Plumbing, and Services Training Package – Version 5 page 2 of 31

ARTIBUS INNOVATION

Artibus Innovation is the Skills Service Organisation supporting the Industry Reference Committees (IRCs) for the Construction, Plumbing and Services and Property Services sectors in Australia. It develops, manages, and supports nationally recognised Training Packages.

The IRCs are responsible for providing guidance, direction, and advice in relation to the workforce training and skills development needs of these two industry sectors. More than 1 million Australians work in over 526,000 enterprises within these sectors. Together industry employees and enterprises contribute significantly to Australia's infrastructure, underpinning the nation’s economic and social fabric.

ARTIBUS INNOVATION

This case for endorsement responds to the policy to align training package endorsed components to the 2012 Standards for Training Packages.

In complying with these standards and all other corresponding policy requirements, Artibus Innovation has developed an industry-based comprehensive process to transition training package endorsed components to the 2012 Standards for Training Packages.

Work presented within this case for endorsement has been carried out under Activity Order: AA/2015-16-02 and incorporates one qualification and 30 units of competency for endorsement.

Approximately 80 organisations were consulted on the work associated with this case for endorsement.


EXECUTIVE SUMMARY

ARTIBUS INNOVATION

ContentsA. ADMINISTRATIVE DETAILS OF THE CASE FOR ENDORSEMENT.....................................................................................6

NAME OF ALLOCATED IRC(S).........................................................................................................................................6NAME OF THE SSO.......................................................................................................................................................6PROPOSED TRAINING PACKAGE COMPONENTS...................................................................................................................6PROCEDURAL INFORMATION...........................................................................................................................................6ACTIVITY ORDER: AA/2015-16-02................................................................................................................................6

Type of Activity: Transition................................................................................................................................................6Qualifications: 1.................................................................................................................................................................6

Total Units of Competency: 30............................................................................................................................6AISC REQUIREMENTS...................................................................................................................................................6

B. DESCRIPTION OF WORK AND REQUEST FOR APPROVAL..............................................................................................7

DESCRIPTION OF WORK UNDERTAKEN..............................................................................................................................7Methodology.......................................................................................................................................................8

AISC DECISION............................................................................................................................................................8

C. EVIDENCE OF INDUSTRY SUPPORT.............................................................................................................................. 9

INDUSTRY REFERENCE COMMITTEE (IRC)..........................................................................................................................9INDUSTRY AND STAKEHOLDERS........................................................................................................................................9STATE TRAINING AUTHORITY (STA).................................................................................................................................9

Alternative approaches explored.........................................................................................................................9REPORT BY EXCEPTION..................................................................................................................................................9

D. INDUSTRY EXPECTATIONS ABOUT TRAINING DELIVERY.............................................................................................10

ADVICE ABOUT INDUSTRY’S EXPECTATIONS OF TRAINING DELIVERY......................................................................................10QUALITY PRINCIPLES: FLEXIBILITY, RECOGNITION, ACCESS, AND EQUITY................................................................................10

Flexibility...........................................................................................................................................................10Recognition.......................................................................................................................................................10Access................................................................................................................................................................11Equity................................................................................................................................................................11

IRC(S) RECOMMENDATION(S) ON TRAINEESHIP AND APPRENTICESHIP..................................................................................11Traineeship........................................................................................................................................................11Apprenticeship...................................................................................................................................................11

E. IMPLEMENTATION OF THE NEW TRAINING PACKAGE................................................................................................12

ADVICE ON OCCUPATIONAL AND LICENSING REQUIREMENTS..............................................................................................12IMPLEMENTATION ISSUES OF NOTE AND MANAGEMENT STRATEGY......................................................................................12ADVICE ON STUDENT PLACEMENT AVAILABILITY AND WORK PLACEMENT REQUIREMENTS........................................................12ADVICE ON DOWNSTREAM EFFECTS OF THE CHANGES.......................................................................................................12

G. IMPLEMENTATION OF THE COAG INDUSTRY SKILLS COUNCIL REFORMS TO TRAINING PACKAGES.............................13

EXPLANATION: AISC DECISION SUPPORTS COAG INDUSTRY SKILLS COUNCIL REFORMS..........................................................13EVIDENCE OF COMPLETION OF THE TRAINING PACKAGE DEVELOPMENT WORK......................................................................13THIS CASE FOR ENDORSEMENT WILL BE PUT FORWARD TO THE AISC NOVEMBER 16, 2017.....................................................13EVIDENCE THAT TRAINING PACKAGE COMPONENTS ARE PREPARED FOR PUBLICATION.............................................................13

Approximate Publication Timeframe.................................................................................................................13


ARTIBUS INNOVATION

F. QUALITY ASSURANCE REPORTS................................................................................................................................. 14

QUALITY REPORTS......................................................................................................................................................14DECLARATION............................................................................................................................................................14

H. PROPOSED ENDORSED COMPONENTS..................................................................................................................... 15

QUALIFICATION..........................................................................................................................................................15QUALIFICATION MAPPING............................................................................................................................................18UNIT OF COMPETENCY MAPPING..................................................................................................................................18IMPORTED UNITS OF COMPETENCY................................................................................................................................25CPC TRAINING PACKAGE MODIFICATION HISTORY...........................................................................................................25


ARTIBUS INNOVATION

A. ADMINISTRATIVE DETAILS OF THE CASE FOR ENDORSEMENTName of Allocated IRC(s) Construction Industry Reference Committee

Name of the SSOArtibus Innovation

Proposed Training Package ComponentsThis submission puts forward the Case for Endorsement for 1 qualifications and 30 units of competency relating to CPC Construction, Plumbing, and Services Training Package Version 5.

Procedural Information Activity Order: AA/2015-16-02Type of Activity: Transition Qualifications: 1

CODE TITLE

CPC30317 Certificate III in Concreting

Total Units of Competency: 30Please refer to Section H: Proposed Endorsed Components of this Case for Endorsement for a complete mapping overview of the endorsed components.

AISC RequirementsThis Case for Endorsement adheres to the policy directive to align the CPC Training Packages to the 2012 Standards for Training Packages.


ARTIBUS INNOVATION

B. DESCRIPTION OF WORK AND REQUEST FOR APPROVAL Description of Work Undertaken This Case for Endorsement responds to the policy to align components in Training Packages to the 2012 Standards for Training Packages.

In complying with this policy, Artibus Innovation established a nation-wide inclusive consultative approach with industry and key stakeholders through the developmental and final validation stages of the project. Feedback was sought from:

industry contractors members of the high risk work technical advisory group peak industry associations registered training organisations regulators –safety, occupational and VET skills training authorities industry funds.

Changes

Industry consultation was undertaken to ensure:

Qualification

reflects industry vocational requirements

Units

application statement has been condensed and written in plain English

elements have been logically sequenced

performance criteria have been consolidated to reduce duplication and respecified in a clear and logical manner

foundations skills have been made explicit

performance evidence of each unit has been reshaped to specify the number of occasions a performance of a task needs to be demonstrated

knowledge evidence has been articulated to align with the internal logic of the given unit

assessment conditions of each unit have been standardised

updated with relevant safety and legislative standards.


ARTIBUS INNOVATION


ARTIBUS INNOVATION

MethodologyStakeholder consultation associated with this project incorporated the following methods for collecting the views of key stakeholders in each state and territory:

1. structured forums2. one on one or small group face to face consultations3. online survey.

Stakeholder feedback has been analysed and provides conclusive direction for this case for endorsement. Table 1 outlines the number of individual organisations, by state and territory, consulted for the training package components relevant to Certificate III in Concreting.

Table 1:Organisations consulted by state

ADL BNE CBR DRW HBA MEL PER SYD Total

Certificate III in Concreting 11 21 5 5 1 11 17 6 77

AISC Decision Pending


ARTIBUS INNOVATION

C. EVIDENCE OF INDUSTRY SUPPORT Industry Reference Committee (IRC)Pending

Industry and StakeholdersArtibus Innovation has consulted with 77 organisations through a series of state/territory forums, one on one meetings and online surveys. All feedback received has been documented and analysed. The gathered intelligence has been used to direct this case for endorsement.

Current demand for this qualification

During the 2014 to 2106 data collection period there have been more than 12,2001 enrolments in Certificate III in Concreting. Of these, approximately 50% of students have completed their training. Queensland and Northern Territory data shows completion rates of 78% and 0%2 respectively when enrolment and completion data is compared over the same period.

Less than 10%3 of enrolments during the same period were recorded as being undertaken via an Australian Apprenticeships pathway. Unemployed students account for approximately 1.5% and the vast majority, at almost 90%, identified as being employed and not under an Australian Apprenticeships pathway.

Future demand for this qualification

Employment demand for workers with skill level 3 (Commensurate with a Certificate IV or III - including at least 2 years on-the-job training) is expected to rise by almost 58,000 places by 20224.

Employment demand for concreters is projected to rise by 6,0005 by 2022 representing an increase of 14% of the current workforce. This is a significant statistic which accounts for approximately 10% of the overall increase in demand for all skill level 3 vocational requirements.

State Training Authority (STA)Pending

1 VOCSTATS - TVA program enrolments 2014-2016

2 Northern Territory data shows mainly only enrolment numbers during 2016, so their completion rates may increase in future collection periods

3 VOCSTATS - TVA program enrolments 2014-2016 - Apprentice/trainee status and Labour force status

4 Australian Government Department of Employment - 2017 Skill Level projections – five years to 2022

5 Australian Government Department of Employment - Occupational projections – five years to 2022


ARTIBUS INNOVATION

Alternative approaches exploredNo alternative approaches were suggested by industry.

Report by Exception Several stakeholders in the consultation forums held in Sydney and Melbourne requested that various streams be introduced into the Certificate III in Concrete to cater for the varying sub sectors of concreting work, such as footpaths, residential and commercial application. This request did not form a pattern during consultation and did not emerge as an issue from the twenty nine registered training organisations consulted. Request was not actioned.

Several stakeholders in the consultation forums held in Adelaide, Canberra and Sydney requested that CPCCCC03053 - Slump test concrete be moved from electives to core. This request could in fact limit the effective vocational application of the qualification as concreters involved in footpath, road gutter and residential footing construction rarely use this testing method. Request was not actioned.

One stakeholder in the consultation forums held in Brisbane requested that CPCCC03051 - Conduct off form vertical concrete operations be moved from electives to core. Off form application has many uses in commercial construction and sound dampening walling along major transport corridors, among others, however there is no application in footpath and residential footing construction for this method. Request not actioned.

There was strong support by stakeholders in most states and territories for a separate qualification in concrete pumping. As the vocations of concrete worker, concrete pump operator or concrete pump line hand are so different, the Certificate III in Concreting cannot be restructured to effectively deal with each of these vocations. Artibus intends to prepare a separate case for change to develop a qualification to match the requirements of the concrete pumping industry.


ARTIBUS INNOVATION

D. INDUSTRY EXPECTATIONS ABOUT TRAINING DELIVERYAdvice about Industry’s Expectations of Training DeliveryThe revised units of competency (outlined in section H) have been transitioned to align with the 2012 Standards for Training Packages.

The proposed endorsed components supersede and are equivalent to their preceding unit of competency in all but three cases.

The impact of the changes of the proposed endorsed components is as follows:

registered training providers (RTOs) will be notified by training.gov.au of the changes in the units of competency and the assessment requirements

RTOs will be required to adapt all aspects of training and assessment to the changes in structure and content in the units of competency and assessment requirements.

RTOs can expect a series of changes. RTOs will be required to:

assess and implement the mandatory delivery and assessment requirements specified in the endorsed components

adjust training and assessment strategies review delivery and assessment resources address and enhance supporting material and resources to align with assessment requirements.

Quality Principles: Flexibility, Recognition, Access, and Equity FlexibilityThe proposed qualification provides a range of elective choices which facilitate vocational outcomes in a range of occupational contexts. Examples include, sole traders who may require a very broad range of skills including job planning, specifying concrete supply requirements and briefing the work team. The proposed qualification also provides vocational outcomes for specialist contractors constructing tilt panels on site or those working with high performance concrete.

The development of the endorsed components aligns with current industry regulatory and skills needs and expectations.

RecognitionStudents entering the proposed qualification from Certificate I or II in Construction may be granted credit transfer for up to six units of competency under the proposed qualification framework.


ARTIBUS INNOVATION

The skills and knowledge embedded in the endorsed components facilitate and support:

student movement between VET qualifications

the application of skills and knowledge acquired by the student in a range of workplaces

transferability and portability of skills in different industries.

Please refer to the CPC Version 4.0 Companion Volume Implementation Guide.

Access There are no entry requirements for the proposed qualification.

Equity The units of competency include foundation skills and support equitable access and progression of learners by:

allowing direct entry facilitating occupational pathways in the sector.

The unit selections within the proposed qualification promote and support cross-sector movement.

Please refer to the CPC Version 4.0 Companion Volume Implementation Guide.

IRC(s) Recommendation(s) on Traineeship and ApprenticeshipTraineeshipPending

ApprenticeshipPending


ARTIBUS INNOVATION

E. IMPLEMENTATION OF THE NEW TRAINING PACKAGE Advice on Occupational and Licensing RequirementsLicensing requirements apply to concrete contractors in all states and territories except Tasmania. Concrete workers who are employed by concrete contractors do not need to be licensed. Each jurisdiction has varying requirements for education to support a licence application, ranging from a full qualification to one or more units of competency.

Implementation Issues of Note and Management Strategy No issues have been identified.

For further information on implementation support, please consult the CPC Companion Volume Implementation Guide available through VETNet.

Advice on Student Placement Availability and Work Placement Requirements DT - I have requested that Sheridan seek an out of session response from the TAG to answer this section

Advice on Downstream Effects of the ChangesNo downstream effects of the changes have been identified.


ARTIBUS INNOVATION

G. IMPLEMENTATION OF THE COAG INDUSTRY SKILLS COUNCIL REFORMS TO TRAINING PACKAGESExplanation: AISC Decision Supports COAG Industry Skills Council ReformsThe decision being sought from the AISC will support the COAG Industry and Skills Council reforms to training packages by endorsing components that have been developed to ensure they reflect:

best practices in the industry jurisdictional legislative requirements workplace safety measures industry occupational standards.

In this way, the endorsement of the components will enhance the:

usability of the units of competency in the industry clarity and intent of the units of competency training and delivery.

Evidence of Completion of the Training Package Development WorkThis case for endorsement will be put forward to the AISC November 16, 2017.

Evidence that Training Package Components are Prepared for PublicationUpon endorsement and the official release of the AISC communique, the endorsed components will be ready for publication approximately ? weeks following the AISCs meeting.

Approximate Publication Timeframe??????????


ARTIBUS INNOVATION

F. QUALITY ASSURANCE REPORTSQuality ReportsPending

DeclarationArtibus Innovation declares that the proposed endorsed components of the CPC Training Package Version 4 adhere to the requirements of the 2012 Standards for Training Packages, Training Package Products Policy, and Training Package Development and Endorsement Process Policy.

The CPC Companion Volume Implementation Guide can be located on the VETNet website at:

??????????????.

Artibus Innovation official website, through an external link: www.artibus.com.au.


http://www.artibus.com.au/

ARTIBUS INNOVATION

H. PROPOSED ENDORSED COMPONENTS QualificationCODE TITLE


Qualification Description

This qualification reflects the role of concreters working in concreting operations on residential and commercial projects.

Occupational titles could include:

concreter concrete tilt panel fabricator.

The qualification has core unit of competency requirements that cover common skills for the construction industry, as well as a specialist field of work.

The construction industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context.

Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCWHS1001 Prepare to work safely in the construction industry covers this requirement.

Licensing, legislative, regulatory or certification requirements apply to concreting in some States. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.

This qualification is suitable for an Australian apprenticeship pathway.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To achieve this qualification, competency must be demonstrated in:

20 units of competency: 14 core units 6 elective units.

The elective units must ensure the integrity of the AQF alignment and contribute to a valid,


ARTIBUS INNOVATION

industry-supported vocational outcome and are to be chosen as follows:

a minimum of three elective units must be chosen from the specialist concreting elective units listed below, coded ‘CO’

up to three units may be chosen from the elective units listed below, or from other Certificate III or Certificate IV qualifications in CPC, CPC08, or other current Training Packages provided they do not duplicate the outcome of another unit chosen for the qualification.

An asterisk against a unit code listed below indicates that there are prerequisite requirements that must be met when packaging the qualification. Users are referred to the list of units with prerequisite unit requirements available for this purpose in the Training Package Implementation Guide.

Core units

CPCCCM1012 Work effectively and sustainably in the construction industry

CPCCCM1013 Plan and organise work

CPCCCM1014 Conduct workplace communication

CPCCCM1015 Carry out measurements and calculations

CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry

CPCCCM3004 Identify and apply information in construction plans, drawings and specifications

CPCCCM2006 Apply basic levelling procedures

CPCCCO2022* Select, check and maintain concreting plant, tools and equipment

CPCCCA3024* Erect and dismantle formwork for footings and slabs on ground

CPCCCO2021* Handle concreting materials

CPCCSF2004* Place and fix reinforcement materials

CPCCCO3041* Place concrete

CPCCCO3042* Finish concrete

CPCCCO3043* Cure concrete


ARTIBUS INNOVATION

Elective units

CPCCCA3001* Carry out general demolition of minor building structures

CPCCCM1016 Identify requirements for safe tilt-up work

CPCCCM2008* Erect and dismantle restricted height scaffolding

CPCCCM3007* Set up, operate and maintain indirect action explosive power tools

CPCCCO3035* Assess and specify concrete supply requirements

CPCCCO3036* Plan concrete work and brief team

CPCCCO3044* Carry out decorative finishes to concrete

CPCCCO3046* Repair and rectify concrete

CPCCCO3047* Cut and core concrete

CPCCCO3048* Construct tilt panels on site

CPCCCO3049* Apply and finish sprayed concrete

CPCCCO3050* Carry out high performance concreting

CPCCCO3051* Conduct off-form vertical concrete operations

CPCCCO3053* Slump test concrete

CPCCCO3054* Operate concrete agitator trucks

CPCCCO3055* Install topping slabs

CPCCLBM3001 Licence to operate a concrete placing boom

CPCCSF2003* Cut and bend materials using oxy-LPG equipment

CPCCSF3001* Apply reinforcement schedule

CPCCWHS3001 Identify construction work hazards and select risk control strategies

Qualification Mapping Information


Links

An Implementation Guide to this Training Package is available at ????????


ARTIBUS INNOVATION

Qualification MappingMAPPING OF QUALIFICATIONS

Code and TitleRelationship to CPC V4

CommentsEquivalent/ Not Equivalent



Replaces superseded qualification: CPC30313

E

Unit of Competency MappingMAPPING OF UNITS OF COMPETENCY

Code and Title Relationship to CPC V4

Comments Equivalent/ Not Equivalent


CPCCCM1012AWork effectively and sustainably in the construction industry

Unit replaces superseded unit CPCCCM1012A.

Other changes to provide clarity, remove duplication, and reflect requirements of Standards for Training Packages.

E

CPCCCM1013 Plan and organise work

CPCCCM1013A Plan and organise work


Minor changes to provide clarity, remove duplication, and reflect requirements of Standards for Training Packages.

E

CPCCCM1014 Conduct workplace communication

CPCCCM1014A Conduct workplace communication



E

CPCCCM1015 Carry out measurements and calculations

CPCCCM1015A Carry out measurements and calculations

Unit replaces superseded unit: CPCCCO2021A.

Minor changes to provide clarity,

E


ARTIBUS INNOVATION

MAPPING OF UNITS OF COMPETENCY



remove duplication, and reflect requirements of Standards for Training Packages.

CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry

CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

Unit replaces superseded unit: CPCCOHS2001A.

Minor changes to unit code and title.

Minor changes to provide clarity, new safety terminology, remove duplication, and reflect requirements of Standards for Training Packages.

E

CPCCCM3004 Identify and apply information in construction plans, drawings and specifications

Currently endorsed

CPCCCM2006 Apply basic levelling procedures

Currently endorsed

CPCCCO2022 Select, check and maintain concreting plant, tools and equipment

CPCCCO2022A Use and maintain concreting plant, tools and equipment


Significant changes to title, elements 1 and 2, performance criteria, and assessment requirements.

All references to the use of tools and equipment removed.


N

CPCCCA3024 Erect and dismantle formwork for footings and slabs on ground

New unit Unit replaces CPCCCA2003A - Erect and dismantle formwork for footings and slabs on ground.

Other changes to provide clarity, remove duplication, and reflect requirements of

E


ARTIBUS INNOVATION




Standards for Training Packages.

CPCCCO2021 Handle concreting materials

CPCCCO2021A Handle concreting materials


Performance criterion 1.4 deleted – duplicated in 2.2.


E

CPCCSF2004 Place and fix reinforcement materials

CPCCSF2004A Place and fix reinforcement materials

Unit replaces superseded unit: CPCCSF2004.

Changes to performance criteria and assessment requirements to provide clarity, remove duplication, and reflect requirements of Standards for Training Packages.

E

CPCCCO3041 Place concrete

CPCCCO3041A Place concrete


Changes to elements, performance criteria and assessment requirements to provide clarity, remove duplication, and reflect requirements of Standards for Training Packages.

E

CPCCCO3042 Finish concrete

CPCCCO3042A Finish concrete



E

CPCCCO3043 Cure concrete

CPCCCO3043A Cure concrete


Changes to elements, performance criteria and assessment requirements to provide clarity, remove duplication, and

E


ARTIBUS INNOVATION




reflect requirements of Standards for Training Packages.

CPCCCA3001 Carry out general demolition of minor building structures

CPCCCA3001A Carry out general demolition of minor building structures

Unit replaces superseded unit: CPCCCA3001A.


E

CPCCCM1016 Identify requirements for safe tilt-up work

CPCCCM1016A Identify requirements for safe tilt-up work

Unit replaces superseded unit: CPCCCM1016A.


E

CPCCCM2008 Erect and dismantle restricted height scaffolding

CPCCCM2008B Erect and dismantle restricted height scaffolding


E

CPCCCM3007 Set up, operate and maintain indirect action explosive power tools

CPCCCM2007B Use explosive power tools

Unit replaces superseded unit: CPCCCM2007B.

Changes to title, elements and performance criteria.

Changes to provide clarity, remove duplication, and reflect requirements of Standards for Training Packages.

N

CPCCCO3035 Assess and specify concrete supply requirements

CPCCCO3035A Assess and specify concrete supply requirements



E


ARTIBUS INNOVATION




CPCCCO3036 Plan concrete work and brief team

CPCCCO3036A Plan concrete work and brief team



E

CPCCCO3044 Carry out decorative finishes to concrete

CPCCCO3044A Carry out decorative finishes to concrete



E

CPCCCO3046 Repair and rectify concrete

CPCCCO3046A Repair and rectify concrete



E

CPCCCO3047 Cut and core concrete

CPCCCO3047A Cut and core concrete



E

CPCCCO3048 Construct tilt panels on site

CPCCCO3048A Construct tilt panels on site



E


ARTIBUS INNOVATION




CPCCCO3049 Apply and finish sprayed concrete

CPCCCO3049A Apply and finish sprayed concrete



E

CPCCCO3050 Carry out high performance concreting

CPCCCO3050A Carry out high performance concreting


Updated to include higher MPA and forms of concrete technology.


E

CPCCCO3051 Conduct off-form vertical concrete operations

CPCCCO3051A Conduct off-form vertical concrete operations

Unit replaces superseded non-equivalent unit CPCCCO3051A.

Element 2 removed as this work is performed by carpenters. Element 3 removed as this work is performed by steel-fixers. Elements 2 and 3 were not covered in the critical aspects of evidence in CPCCCO3051A.


N

CPCCCO3053 Slump test concrete

CPCCCO3053A Slump test concrete


E


ARTIBUS INNOVATION





CPCCCO3054 Operate concrete agitator trucks

CPCCCO3054A Operate concrete agitator trucks



E

CPCCCO3055 Install topping slabs

CPCCCO3055A Install topping slabs



E

CPCCLBM3001 Licence to operate a concrete placing boom

Currently endorsed

CPCCSF2003 Cut and bend materials using oxy-LPG equipment

CPCCSF2003A Cut and bend materials using oxy-LPG equipment

Unit replaces superseded unit: CPCCSF2003A.

Changes to performance criteria and assessment requirements to provide clarity, remove duplication, and reflect requirements of Standards for Training Packages.

E

CPCCSF3001 Apply reinforcement schedule

CPCCSF3001A Apply reinforcement schedule

Unit replaces superseded unit: CPCCSF3001A.

Changes to performance criteria and assessment requirements to provide

E


ARTIBUS INNOVATION




clarity, remove duplication, and reflect requirements of Standards for Training Packages.

CPCCWHS3001 Identify construction work hazards and select risk control strategies

Currently endorsed

Imported Units of CompetencyIMPORTED UNITS OF COMPETENCY

Code and Title Parent Training Package

There are no imported units in the proposed qualification

CPC Training Package Modification History CPC PROPERTY SERVICES TRAINING PACKAGE MODIFICATION HISTORY

VERSION NO. RELEASE DATE COMMENTS

4.0 31 Oct 2017 endorsement for the revision of 1 qualification equivalent to its superseded version in CPC08:

CPC30317 Certificate III in Concretingendorsement for the revision of 26 equivalent units of competency:

CPCCCA3001 Carry out general demolition of minor building structures


CPCCCM1013 Plan and organise work CPCCCM1014 Conduct workplace communication CPCCCM1015 Carry out measurements and calculations CPCCCM1016 Identify requirements for safe tilt-up work CPCCCM2008 Erect and dismantle restricted height

scaffolding CPCCCO2021 Handle concreting materials CPCCCO3035 Assess and specify concrete supply

requirements


ARTIBUS INNOVATION

CPC PROPERTY SERVICES TRAINING PACKAGE MODIFICATION HISTORY

CPCCCO3036 Plan concrete work and brief team CPCCCO3041 Place concrete CPCCCO3042 Finish concrete CPCCCO3043 Cure concrete CPCCCO3044 Carry out decorative finishes to concrete CPCCCO3046 Repair and rectify concrete CPCCCO3047 Cut and core concrete CPCCCO3048 Construct tilt panels on site CPCCCO3049 Apply and finish sprayed concrete CPCCCO3050 Carry out high performance concreting CPCCCO3053 Slump test concrete CPCCCO3054 Operate concrete agitator trucks CPCCCO3055 Install topping slabs CPCCWHS2001 Apply OHS requirements, policies and

procedures in the construction industry CPCCSF2003 Cut and bend materials using oxy-LPG

equipment CPCCSF2004 Place and fix reinforcement materials CPCCSF3001 Apply reinforcement schedule

endorsement for the revision of 3 non-equivalent units of competency:

CPCCCM3007 Set up, operate and maintain indirect action explosive power tools

CPCCCO2022 Select, check and maintain concreting plant, tools and equipment

CPCCCO3051 Conduct off-form vertical concrete operations

endorsement for the revision of 1 new unit of competency: CPCCCA3024 Erect and dismantle formwork for footings

and slabs on ground3.0 11 April 2017 endorsement for the revision of 2 non-equivalent units of competency:

CPCCPB3014 Install bulk insulation and pliable membrane products

CPCCPB3027 Install ceiling products2.1 8 December

2016minor release for the revision to CPCCWHS1001 Prepare to work safely in the construction industry replacing superseded CPCCOHS1001A Work safely in the construction industry.

2.0 9 September 2016

endorsement for: revision of two qualifications equivalent to their superseded

versions in CPC08:o CPC30116 Certificate III in Shop-fittingo CPC30216 Certificate III in Signs and Graphics

addition of 10 shop-fitting units of competency: CPCCSH3001 Fabricate shop-fitting components using CNC

machines CPCCSH3002 Fabricate and assemble shopfront structures


ARTIBUS INNOVATION


CPCCSH3003 Assemble and install shopfront structures CPCCSH3004 Assemble internal shop-fitting units and prepare for

transport CPCCSH3005 Apply and trim decorative additions to shop-fittings

and components CPCCSH3006 Prepare shop-fittings and surfaces and apply liquid

finishes CPCCSH3007 Install prefabricated internal shop-fitting units CPCCSH3008 Install internal shop walls and fixtures CPCCSH3009 Demolish shopfronts and bulkheads CPCCSH3010 Prepare shop floors for new coverings addition of 18 signs and graphics units of competency:o CPCCSG3001 Design and lay-out digital signs for productiono CPCCSG3002 Produce and apply vinyl signso CPCCSG3003 Colour manage signso CPCCSG3004 Print digital signso CPCCSG3005 Engrave signs

o CPCCSG3006 Apply gilding to signso CPCCSG3007 Paint lines and scrollso CPCCSG3008 Hand draw chalkboards and showcardso CPCCSG3009 Screen-print signso CPCCSG3010 Hand render pictorialso CPCCSG3011 Install LED technology into signso CPCCSG3012 Fabricate signso CPCCSG3013 Paint letters and decorative effects for signso CPCCSG3014 Manufacture gas-charged glass-formed

illuminated signso CPCCSG3015 Produce airbrushed signso CPCCSG3016 Prepare surfaces for signso CPCCSG3017 Erect and install signso CPCCWHS3001 Identify construction work hazards and

select risk control strategies addition of 9 units of competency and their assessment

requirements, included as core or nominated elective units in the above two qualifications, consisting of:

o CPCCCM2006 Apply basic levelling procedureso CPCCCM2010 Work safely on scaffolding higher than two

metreso CPCCCM3001 Operate elevated work platforms up to 11

metreso CPCCCM3003 Work safely around electrical sources, services

and assetso CPCCCM3004 Identify and apply information in construction

plans, drawings and specificationso CPCCCM3005 Calculate costs of construction worko CPCCCM3006 Carry out levelling operationso CPCCJN3001 Process materials to produce components using


ARTIBUS INNOVATION


static machineso CPCCWC3004 Install suspended ceilings

replacement of imported superseded unit AURVTP2009 Apply vehicle body film wrapping (AUR12) with equivalent imported unit AURVTP009 Apply vehicle body film wrapping (AUR).

1.0 5 June 2015 primary release endorsement for:2 revised qualifications:CPC60115 - Advanced Diploma of Building SurveyingCPC80115 - Graduate Certificate in Fire Systems Design Management1 new qualification:CPC80215 - Graduate Diploma of Building Surveying1 new skill set:CPCSS00004 - Provide building surveying services for residential buildings up to three storeys15 revised units of competency:CPCCBS6001 - Research and evaluate construction methods and materials for residential buildings to three storeysCPCCBS6002 - Research and evaluate construction methods and materials for commercial buildings to three storeysCPCCBS6003 - Apply legal and ethical requirements to building surveying functionsCPCCBS6004 - Assess and advise on compliance of design documentation for residential buildings to three storeysCPCCBS6010 - Conduct and report on building surveying audits of residential buildings up to three storeysCPCCBS6012 - Conduct and report on initial construction inspections of residential buildings up to three storeysCPCCBS6013 - Conduct and report on initial construction inspections of commercial buildings up to three storeysCPCCBS6016 - Assess and advise on performance-based solutions for buildings up to three storeysCPCCBS6017 - Monitor and advise on construction and compliance upgrade work on buildings up to three storeysCPCCLBM3001 - Licence to operate a concrete placing boomCPCMCM8001 - Plan and manage complex projectsCPCMCM8002 - Manage the quality of projects and processesCPCSFS8001 - Define scope of and initiate special hazard fire systems design projectsCPCSFS8002 - Analyse, design and evaluate complex special hazard fire systemsCPCSFS8003 - Develop and submit tenders for fire systems design solutions19 new units of competency:


ARTIBUS INNOVATION


CPCCBS6005 - Assess and advise on compliance of design documentation for commercial buildings to three storeysCPCCBS6006 - Process planning applications for residential buildings up to three storeysCPCCBS6007 - Process planning applications for commercial buildings up to three storeysCPCCBS6008 - Process building applications for residential buildings up to three storeysCPCCBS6009 - Process building applications for commercial buildings up to three storeysCPCCBS6011 - Conduct and report on building surveying audits of commercial buildings up to three storeysCPCCBS6014 - Conduct and report on advanced and final inspections of residential buildings up to three storeysCPCCBS6015 - Conduct and report on advanced and final inspections of commercial buildings up to three storeysCPCCBS8001 - Manage building surveying risks and ensure compliance with ethical and professional standardsCPCCBS8002 - Manage information on construction methods, materials and services for a building surveying teamCPCCBS8003 - Manage information on compliance requirements for a building surveying teamCPCCBS8004 - Advise on compliance of building design documentationCPCCBS8005 - Manage planning approval processes for all building typesCPCCBS8006 - Manage building approval processes for all building typesCPCCBS8007 - Monitor building work and advise on compliance issuesCPCCBS8008 - Conduct and manage the completion of building inspections and auditsCPCCBS8009 - Lead a building surveying teamCPCCBS8010 - Liaise and coordinate with head contractors on building projectsCPCCBS8011 - Assess and advise on performance-based solutions for all types of buildings


Documents

A. ADMINISTRATIVE DETAILS OF THE CASE FOR ... · Web viewCPCCCA3024 Erect and dismantle formwork for footings and slabs on ground New unit Unit replaces CPCCCA2003A - Erect and dismantle