7th International Conference on Tube Hydroforming

TUBEHYDRO 2015

Preliminary

Conference Program

September 9-11, 2015, Xi’an, China

7th International Conference on

Tube Hydroforming

September 9-11, 2015

Xi’an, China

Organized by

Harbin Institute of Technology, China

National Key Laboratory for Precision Hot Processing of Metals, China

Xi’an Jiaotong University, China

State Key Laboratory of Metal Extrusion and Forging Equipment Technology

The China Society for Technology of Plasticity

The Japan Society for Technology of Plasticity

The Korean Society for Technology of Plasticity

The Taiwan Society for Technology of Plasticity

Table of Contents

Welcome Message...................................................................................1

Topics and Sessions..................................................................................1

Conference Committee ............................................................................2

Registration..............................................................................................3

Registration Desks....................................................................................3

Program Schedule ....................................................................................4

Important time and place ........................................................................5

Conference Program ................................................................................6

Conference Venue..................................................................................10

Accommodations ...................................................................................11

City Traffic ..............................................................................................11

Accommodation Map ............................................................................12

Technical tour ........................................................................................13

Cultural tour...........................................................................................13

Contact ..................................................................................................13

1

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

Welcome Message

TUBEHYDRO 2015 is the 7th in a series of international conference on

tube hydroforming. Following the former six TUBEHYDRO conferences held in

Japan, Korea and China, this conference will focus not only on the recent

experimental, computational and theoretical research achievements on

tube/sheet hydroforming technologies, but also on the industry application

development, solutions for mass production and topics concerning quality

control, die life and energy saving, etc. The delegates will have an opportunity

to exchange their new ideas and results, even cultures. You are welcome to

contribute in the conference and make it fruitful together with us.

Shijian Yuan

Harbin Institute of Technology

Chair of TUBEHYDRO2015

Topics and Sessions

Session A1: Tube hydroforming

Session A2: Warm hydroforming and hydroforming of high strength

material tube

Session B : Sheet forming

Session C : Tube bending and others

2

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

Conference Chair

Shijian Yuan, China

Steering Committee

Ken-ichi Manabe, Japan

Shijian Yuan, China

Heon-Young Kim, Korea

Yeong-Maw Hwang, Taiwan

Yukihisa Kuriyama, Japan

Organizing Committee

Gang Liu (Chairman)

Zhubin He

Wei Liu

Jun Zhang

Qi Zhang,

Scientific Committee

Jun Chen, China

Fuh-Kuo Chen, Taiwan

Sadakatsu Fuchizawa, Japan

Huiwen Hu, Taiwan

Haomin Jiang, China

Kazuaki Katou, Japan

Gyo Sung Kim, Korea

Hyung-seop Kim, Korea

Yoon-Kyu Kim, Korea

Young-Suk Kim, Korea

Takashi Kuboki, Japan

Lihui Lang, China

Myoung-Gyu Lee, Korea

Young-Seon Lee, Korea

Gang Liu, China

Rendong Liu, China

Xin lu, China

Ninshu Ma, Japan

Masaaki Mizumura, Japan

Younghoon Moon, Korea

Atsushi Shirayori, Japan

Noah Utsumi, Japan

Wencai Xie, China

Yoshinori Yoshida, Japan

Mei Zhan, China

Shengdun Zhao, China

3

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

Registration

Category After June 30 Fee Includes

Regular 450$

(about 2800RMB)

Proceedings

Technical tours

Banquet dinner, lunches, and

refreshments

Accompanying

person

200$

(about 1250RMB)

Banquet dinner, lunches, and

refreshments

Registration Desks

Sep. 9(Wed.) : 10:00—20:00, Registration

1) Tang-paradise Hotel (Chinese name is芳林苑酒店)

Address: No.99 West of FuRong Road Xi’an

(The east gate of Tang Paradise)

Tel: 029-85513888

芳林苑酒店 地址：西安市芙蓉西路 99号，大唐芙蓉园东门

电话：029-85513888

2) Lotus Hotel(Chinese name is芙蓉坊酒店)

Address: No.1, Yannan Yi Road Xi’an

(The west gate of Tang Paradise

Tel: 029-85573115

芙蓉坊酒店 地址：西安市曲江新区雁南一路，大唐芙蓉园西门

电话：029-85573115

4

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

Program Schedule

Sep.9, 2015 (Wed.)

Time Program Place

10:00~20:00 Registration

1) Tang Paradise Hotel

(芳林苑酒店)

2) Lotus Hotel

（芙蓉坊酒店）

18:30~20:00 Welcome Reception

Chinese resturant in Tang

Paradise Hotel

(芳林苑酒店中餐厅)

Sep.10, 2015 (Thur.)

09:00~09:15 Opening Ceremony

09:15~10:15 Keynote Speech

10:15~10:30 Group Photo

10:30~11:00 Coffee break

11:00~12:00 Keynote Speech

South room of Pin Chunting

（品春厅南厅）

12:00~13:00 Lunch Zhonghe Room

(中和厅)

Session A1: Tube hydroforming South room of Pin Chunting

（品春厅南厅） 14:00~15:40

Session B: Sheet forming Ying Bingge

（迎宾阁）

15:40~16:00 Coffee break

Session A1: Tube hydroforming South room of Pin Chunting

（品春厅南厅） 16:00~18:00

Session B: Sheet forming Ying Bingge

（迎宾阁）

18:30~20:30 Banquet South room of Pin Chunting

（品春厅南厅）

5

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

Sep.11, 2015 (Fri.)

Session A2: Warm hydroforming and high

strength material tube hydroforming

South room of Pin Chunting

（品春厅南厅） 08:30~10:10

Session C: Tube bending and others Ying Bingge

（迎宾阁）

10:10~10:20 coffee break

Session A2: Warm hydroforming and high

strength material tube hydroforming

South room of Pin Chunting

（品春厅南厅） 10:20~12:00

Session C: Tube bending and others Ying Bingge

（迎宾阁）

12:00~13:00 Lunch Zhonghe Room

(中和厅)

14:00~18:00 Technical tour Collecting at Lobby of Tang

Paradise hotel and Lotus hotel

18:30~20:30 Farewell Party To be confirmed

Sep.12, 2015 (Sat.)

08:00~18:00 Cultural tour Collecting at Lobby of Tang

Paradise hotel and Lotus hotel

Important time and place

Sep. 10, 2015 Opening Ceremony

Tang Paradise hotel: gathering point at the lobby,

depature at 8:30.

Lotus hotel: gathering point at the lobby, depature at

8:40.

Sep. 11, 2015 Technical tour Pick-up at the lobby of Tang Paradise hotel and Lotus

hotel. Depature at 14:00 and return at 18:00.

Sep. 11, 2015 Farewell Party

For those who don’t join the technical tour, gathering

point at the lobby of Tang Paradise hotel and Lotus

hotel. Depature at 17:30 and return at 20:30.

Sep. 12, 2015 Cultural tour Gathering point at the lobby of Tang Paradise hotel and

Lotus hotel. Depature at 8:00 and return at 18:00.

6

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

Conference Program

Thursday, September 10, 2015

9:00~9:15 Opening Ceremony

Conference Chairman: Prof. Shijian Yuan

9:15~10:15 Keynote speech Chairman: H.Y. Kim

9:15~9:45 Material Flow Process Design and Intelligent Process Control System for Tube Hydroforming

Ken-ichi Manabe (Japan)

9:45~10:15 Invest igat ions into Forming Limits and Process Control of Micro-Hydroforming

Christoph Hartl (Germany)

10:15~11:00 Group Photo and Coffee Break

11:00~12:00 Keynote speech Chairman: Y.M. Hwang

11:00~11:30 FE Analysis of Tube Hydroforming Process for Stainless Steel Exhaust Tail Pipe Part

Soo Sik Han (Korea)

11:30~12:00 Constitut ive Modeling and Formability Evaluat ion of Tubular Material for Hydroforming Processes

Zhubin He (China)

12:00~13:00 Lunch

14:00~15:40 Session A1-Tubehydroforming

Chairman: F.K. Chen

Session B-Sheet forming

Chairman: M. G. Lee

14:00~14:20

Study of Hydraulic Compound Forming of Rectangular Tubes(Invited)

Yeong-Maw Hwang and Ren-Kai Wu (Taiwan)

Numerical Study of Micro Hydro Deep Drawing(Invited)

Liang Luo, Zhengyi Jiang, Dongbin Wei, Xianming Zhao, Di Wu, Ken-ichi Manabe

and Hideki Sato (Australia)

14:20~14:40

Deformation Behavior Analysis of S-Shaped Bellows in Hydroforming

Jing Liu, Xing Zhang, Yang Liu, Xiao Li and Lanyun Li (China)

Calibrat ion of the Bauschinger Behavior of Aluminum Alloy Sheet by Prestrain-Bending Approach

Shun-lai Zang and Fang Shao (China)

7

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

14:40~15:00

New Tool Concept for Internal-High-Pressure Forming of Long Thin-Walled Tubes

Mathias Liewald MBA, Martin Barthau and Stefan Wagner (Germany)

Experiment and Simulat ion on Strengthening Behavior of Al-Cu-Mn aluminum alloy by Sheet Hydroforming

Yizhe Chen, Wei Liu and Shijian Yuan (China)

15:00~15:20

Numerical and Experimental Invest igat ions of Cross Shaped Micro Tube Hydroforming

Hideki Sato, Dai Kobayashi and Ken-ichi Manabe (Japan)

Invest igat ion on the Forming Characterist ics of Hybrid Impact Hydroforming

Lijing Lin, Lihui Lang and Marai Murhaf (China)

15:20~15:40

Applicat ion of Tube Hydroforming and Bending to Scooter Frame Design

Huiwen Hu, Kai-Ti Fan and Tingyu Chen (Taiwan)

Enhanced formability and strength of solut ion treated Al-Mg-Si alloy sheet during warm deep drawing

Xiaobo Fan, Zhubin He, Yang Fang, and Shijian Yuan (China)

15:40~16:00 Coffee Break

16:00~18:00 Session A1-Tubehydroforming

Chairman: G. Liu

Session B-Sheet forming

Chairman: Z.Y. Jiang

16:00~16:20

Tube Bending in Hydroforming a High-Strength Automotive Subframe(Invited)

Sin-Liang Lin, Zheng-Hao Zhang, Heng-Kuang Tsai and Fuh-Kuo Chen

(Taiwan)

Predict ion of Fracture Edge Shape in Blanking Process for the Weldability of Coupled Torsion Beam(Invited)

Chung An Lee, Heon Young Kim, Dae-Young Kim, Myoung-Gyu Lee and

Jong Kyu Park (Korea)

16:20~16:40

THF Failure Indicators for Adaptive FEM Simulat ion Based Methodology

Ramil Kesvarakul, Thanasan Intarakumthornchai

and Suwat Jirathearanat (Thailand)

Simulat ion of Welding Thermal Stress and Strain in Tube Forming Parts and Stamping Parts Using Accelerated Explicit FEM and GPU(Invited)

Nin-shu Ma, Jian Zhao, Rong-feng Liu and Shi-jian Yuan (Japan)

16:40~17:00

The Development of Crash Box Hydroforming and the Defect Improving

Ruodong Lu, Haomin Jiang and Lei Wu (China)

Hole-flanging by Incremental Sheet Forming Process

Tingt ing Cao, Bin Lu and Jun Chen (China)

17:00~17:20

Effect of Flow Pattern to Tube Hydroforming via Insert Modificat ion

Purit Thanakijkasem, Neranuch Usamith, Li Zhang, Sasawat Mahabunphachai

(Thailand)

An Algorithm of Counter-roller Flow-forming Force

Chengcheng Zhu, Shengdun Zhao, Qi Zhang, Chao Zhang and Shuqin Fan

(China)

8

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

17:20~17:40

Fuzzy Adaptive Process Control of Y-shape Tube Hydroforming with Die-embedded Sensors

D.Kobayashi, T. Nakamori, X. Chen, K. Tada and K. Manabe (Japan)

Improvement of Simulat ion Precision by Reasonable Regression of Hydro-bulging Experimental Data

Yanli Lin, Zhubin He and Shijian Yuan (China)

17:40~18:00

Influence of Axial Feedings on Hydro-Forming of 780MPa Torsion Beam

W.W. Zhang, C. Han, S. J. Yuan (China)

Optimization Research on Warm Hydroforming Process of Thin-walled 2060 Al-Li Alloy Part by FEM Simulat ion

Lihui Lang, Kangning Liu, Wei Wu and Baosheng Liu (China)

18:30~20:30 Banquet

Friday, September 11, 2015

8:30~10:10 Session A2-Warm hydroforming and high strength material tube

hydroforming Chairman: S.H. Li

Session C-Tube bending and others

Chairman: N.S. Ma

8:30~8:50

In-Situ Manufacturing of Metal–Plast ic Composite Structures by Process Combination of Hydroforming and Inject ion Molding(Invited)

Frank Schieck, Dirk Landgrebe

and André Albert (Germany)

Study on the Mechanism of Detachments and Axial Offset in Numerical Control Bending of Mechanically Bonded Bimetallic Clad Tube(Invited)

Mei Zhan, Jing Guo and He Yang (China)

8:50~9:10

Microstructure Evolut ion of TRIP Seamless Steel Tube in Free Hydraulic Bulge Process

Zicheng Zhang, Chenxi Zhao, Peng

Huang and Ken-ichi Manabe (China)

Deformation Behavior in Rotary Draw

Bending of High Strength Steel

Shohei Tamura, Keinosuke Iguchi,

Masaaki Mizumura and Noriyuki Suzuki

(Japan)

9:10~9:30

Finite Element Predict ion of Martensite

Volume Fract ion in SS304 Tube

Hydroforming

Purit Thanakijkasem, Vitoon Uthaisangsuk, Nattavut Ormsuptawee,

Sasawat Mahabunphachai and Li Zhang (Thailand)

Effect of Different Tube Diameters on

Thickness Distribut ion and Springback

Angles in NC Rotary Draw Bending of

Al-Mg-Mn Alloy Tubes

Xuegang Li, Xiaoqiang Li, Xueshan Bai

and Xingmin Zhang (China)

9:30~9:50

Pract icality and Formability of Integrally St iffened Tube Hydro-Assisted Forming

G.N. Chu, W. Li and K. Zhang (China)

Numerical Predict ion of Thermal

Deformation in the Welding Process of

Tube Components

Seung-Kyu Lee, Heon Young Kim, Hyung

Jong Kim, Kyoungteak Lee, Ji Hoon Kim

and Daeyong Kim (Korea)

9

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

9:50~10:10

Design and Analysis of Car Rearview Mirror Aluminum Alloy Shell

Dyi-Cheng Chen, Ci-Syong You,

Yu-Ping Tseng and Chieh-Hsin Ni (Taiwan)

Study on Cross-Sect ional Deformation of

H-Typed Rotary Draw Bending of H96

Brass Double-Ridged Rectangular Tube

with Different Ridge Groove Filler

Materials

Fan Jiang, Yuli Liu and He Yang (China)

10:10~10:20 Coffee Break

10:20~12:00

Session A2-Warm hydroforming and high strength material tube

hydroforming Chairman: F. Schieck

Session C-Tube bending and others

Chairman: M. Zhan

10:20~10:40

Full Process Design for Tube

Hydroforming of Sub-frame(Invited)

Bin Gu, Shanshuai Wang, Shuhui Li

and Zhongqin Lin (China)

R&D of Key Technology for Internal

Variable Diameter Tubes Indirect

Extrusion Product ion(Invited)

Jun Zhang, Hongjuan Yang, Jian Yang,

Yongjia Chen and Sheng Huang (China)

10:40~11:00

Influence of Forming Condit ion on

Residual Stress of Pipe Torsion Beam

Keinosuke Iguchi, Manabu Wada,

Masaaki Mizumura and Noriyuki Suzuki

(Japan)

Development of Laser Assisted Dieless

Tube Forming Apparatus for Fabricat ion of

Micro Metal Bellows

Tsuyoshi Furushima, Ryo Kitamura

and Ken-ichi Manabe (Japan)

11:00~11:20

Predict ion of Duct ile Fracture Behaviors

for TA15 Titanium Alloy at Elevated

Temperatures

Lei Yang, Baoyu Wang, Gang Liu

and Huijun Zhao (China)

Study on the Microstructure Evolut ion in

Rolling-Spinning Process of

Ti-6Al-2Zr-1Mo-1V Tubes

Jing Guo, Mei Zhan, He Yang, Qiang Deng

and Fei Ma (China)

11:20~11:40

Deformation Behavior of Narrow Copper

Tubes in Tube Hydroforming

Yu Takagi, Shoichiro Yoshihara, Yoshihiro

Amikura, Riku Nakano, Yusuke Okude

and Bryan J. MacDonald (Japan)

Effect of Mandrel Position in Draw

Bending of Copper Tube with Thin Wall

and Small Diameter

Guanghui Wang, Takashi Kuboki, Masato

Watanabe and Akinori Tsuchiya (Japan)

11:40~12:00

Effects of Temperature Fields on Gas

Forming of Titanium Alloy Tube at High

Pressure and Intermediate Temperature

Gang Liu, Jianlong Wang, Yong Wu,

Kai Wang and Shijian Yuan (China)

The Hydro-Forming Process of a

corrugated pipe

Jinbo Xu(China)

12:00~13:00 Lunch

14:00~18:00 Technical tour

18:30~20:30 Farewell Party

10

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

Conference Venue

Imperial Banquet Hall (Chinese name is御宴宫 Yuyan Gong )

Address: The yanta district lotus road west 99 (west gate of datang furong

garden)

Tel: +86-29-85513890

Floor Plan(to be update)

11

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

Accommodations

Hotel Information Distance to Venue

Tang Paradise Hotel

(芳林苑酒店)

The yanta district lotus road west 99

(datang furong garden eastward)

+86-29-85513888

地址：西安市芙蓉西路 99号，大唐芙

蓉园东门

电话：029-85513888

15mins by foot

Lotus Hotel

(芙蓉坊酒店)

Xi 'an Qu Jiang Yannan Yi Road

(near west gate of datang furong

garden)

+86-29-85573115

地址：西安市曲江新区雁南一路，大

唐芙蓉园西门

电话：029-85573115

5mins by foot

City Traffic

From Airport to Tang Paradise Hotel or Lotus Hotel:

Route 1: By Airport Bus Line 4

To the end station, Xi’an Hotel (about 80mins/RMB26); then transfer by

taxi to Tang Paradise Hotel or Lotus Hotel directly(about 25mins/RMB15).

Route 2: By taxi

To Tang Paradise Hotel or Lotus Hotel directly.

(about 100mins/RMB150)

Climate

In September, the temperature in Xi’an will normally range between 16°C at

night and up to 26°C daytime. Although it is mostly sunny, some light rain may

occur.

12

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

Accommodation Map

13

7th

International Conference on Tube Hydroforming

TUBEHYDRO 2015

Technical tour （Sep.11, Afternoon）

1) Shaanxi Automobile Group Co., Ltd.

It annually produces 80,000 heavy trucks, 30,000 medium-sized trucks and

3,000 buses.

2) Shaanxi Hande Axle Co., Ltd.

It’s main products include: steering front axles, hub reduction axles, single

reduction axles, steering drive front axles and tag axles. Among which, the

hub reduction axles and single reduction axles are in the leading position in

China domestic market relying on the unique technical advantage, excellent

loading capability and transmission torque.

Cultural tour (Sep.12)

1) Terra Cotta Warriors and Horses, Mausoleum of the First Qin Emperor (200

B.C.)

2) Huaqing Hot Springs（Emperor Xuanzong and Yang Guifei in the Tang

Dynasty.

Contact

Dr. Wei Liu

428, Harbin Institute of Technology,

West Dazhi Street 92, Harbin 150001, China

Tel:+86-451-86413115, +86-13903600481,

Fax:+86-451-86415776

E-mail: tubehydro2015@163.com

http://www.hydro-forming.com/tubehydro2015.htm