Innovation can be beautiful.Pass-ThruRefrigerators

Distinctly

i.Series®

Horizon Series™

Innovation can be beautiful.

Pass-Thru RefrigeratorsPharmacy/Laboratory and Blood BankPrecisely executed.Sharply designed.

Helmer has provided high-quality laboratory equipment and refrigerated products for over 30 years. Our experience and attention to detail allow us to provide a product that offers superior uniformity, outstanding reliability, and exceptional benefi ts that bring value every day. In addition, our commitment to service and support ensures satisfaction throughout the life of your product.

Whether storing blood products, reagents, vaccines, or medication, a Helmer product offers True Blue protection. We’re not like

everyone else, we’re . . . Distinctly Helmer.

Innovation can be beautiful.Innovation can be beautiful.Innovation can be beautiful.

Helmer Refrigerators Deliver

High-Quality Craftsmanship that Stands Up to the Performance Standards Required by the Medical/Scientifi c Industry

· Superior chamber temperature uniformity and quick recovery with heavy-duty, forced-air refrigeration system· Operating temperature range from +2ºC to +10ºC· Meets USP797 Clean Room Requirements· Bacteria-resistant powder coating for added security· Self-closing door with magnetic gaskets ensure secure closure after door opening· Solid, stainless steel drawers· Epoxy-coated wire shelves· Drawer mid-stop catch ensures proper closure to maximize airfl ow, maintain temperature uniformity, and protect glass doors from slide throughs

Secure Monitoring for a Safe Storage Environment

· Digital temperature display (i.Center® Monitoring System included on i.Series models)· Key lock· Password protected confi guration· Chart recorder (blood bank models)

Designed for Convenience and Performance

· Single and double door models 26.5 cu ft (142 liters) and 58 cu ft (1586 liters)· Position fl ush with a countertop, cabinet, or other equipment with no additional clearance required· Recessed fl oor contains spills for easy clean-up· Liquid-tight drawers contain spills and maintain the integrity of other products stored in the refrigerator

Standard Scientifi cRefrigerator75% Average RelativeHumidity with a range of70-80% at 4°C

Humidity ReducedHelmer refrigerator55% Average RelativeHumidity with a range of50-60% at 4°C

100%

0%

55%

75%

Rel

ativ

e H

umid

ity

Reduced Humidity Levels CreateDry Storage Environment

Helmer has developed a proprietary approach torefrigeration for Laboratory and Pharmacy Refrigerators resulting in reduced condensation of boxes and other containers.

Time

2

i.Series® and Horizon Series™ Lines

Helmer has two distinct refrigerator lines. Both the i.Series® and Horizon Series™ lines offer high quality construction and attention to detail throughout.

The i.Series® offers many unique features not found on other refrigerator models including a 7 year compressor warranty. The i.Center® Monitoring System anchors this top-of-the-line series. Password protection, automatic high/low alarm testing, event log of alarm conditions, and LCD viewscreen provide advanced monitoring for the secure storage of valuable products. Visual and audible alarms keep you informed of the operating condition of your unit. In addition, the digital microprocessor temperature controller is independent from the alarm/monitoring system and provides redundancy.

The Horizon Series™ offers a temperature controller with an alarm package. It features an LCD digital temperature display, programmable high and low temperature alarms, manual alarm checks, and a programmable operating range.

i.Series Display

Horizon Series Display - Blood Bank

Horizon Series Display - Pharmacy

Single Door Pass-Thru Models

Double Door Pass-Thru Models

i.Series26.5 cu ft (Pharmacy)

Horizon Series26.5 cu ft (Pharmacy)

i.Series58 cu ft (Pharmacy)

Horizon Series58 cu ft (Pharmacy)

i.Series26.5 cu ft (Blood Bank)

i.Series58 cu ft (Blood Bank)

Horizon Series58 cu ft (Blood Bank)

Horizon Series26.5 cu ft (Blood Bank)

3

Pharmacy / Laboratory

Pharmacy Pass-Thru Refrigerators are designed for use as a boundary between a USP797-regulated clean room, in which air contaminants are controlled, and a non-clean ante room. As such, these models include several features which reduce the accumulation of particles on the clean room side. These include a covered top, an optional skirt, designated wall placement, a fl at metal bezel, and locating the monitoring system, compressor, control boards, and evaporation tray vent on the non-clean room side. Bacteria-resistant powder coating also serves to prevent surface contamination.

Standard Features

Temperature Control and Monitoringi.Series®

· i.Center® Monitoring System, described on page 6· Two stainless steel monitoring probes in product simulation bottles

Horizon Series™

· Microprocessor temperature controller with built-in alarm/ monitor, described on page 6· Single, stainless steel monitoring probe in product simulation bottle

i.Series® and Horizon Series™

· Digital microprocessor temperature controller factory set to 4°C with the following features: - Temperature probe mounted in the chamber - Digital offset adjustment for calibration

Pass-Thru Refrigerators are offered in both the i.Series® and Horizon Series™ lines. i.Series® Refrigerators feature the i.Center® Integrated Monitoring System. Horizon Series™ Refrigerators offer a microprocessor temperature controller and alarm/monitoring system. Double and single door units are available in both pharmacy and blood bank models. Double door pharmacy models include 6 drawers and 6 shelves. Double door blood bank models include 12 drawers. Single door pharmacy models feature 3 drawers and 3 shelves. Single door blood bank models feature 6 drawers.

Drawersi.Series®

· Coordinated drawer handles with built-in ledge for labels

i.Series® and Horizon Series™

· Adjustable, two-way, solid stainless steel pull out drawers· Drawer mid-stop catch ensures proper closure to maximize airfl ow, maintain temperature uniformity, and protect glass doors from slide throughs· Drawers are 4” (102mm) high · Durable, liquid-tight construction for containment of spills· Stainless steel drawer standards guard against rust and corrosion· Scratch-Guard edge protectors keep glass doors from being scratched by drawers

Refrigeration System· Heavy-duty, forced-air refrigeration system with optimized humidity levels· Non-CFC, commercially available refrigerant· Automatic condensate evaporator is standard· Internal evaporator fan(s) shut off during door openings

Cabinet Construction · Exterior, interior and door handle(s) are galvannealed steel with bacteria-resistant powder coating· Covered top for placement in clean room · Superior engineered frame for maximum rigidity· Heated, dual-pane, insulated glass door(s)· Self-closing Sure-Seal door system eliminating door pops· Standard key lock· Interior lighting with control panel mounted switch· Minimum of 2” (51mm) non-CFC foamed urethane insulation· Dual, swivel locking casters· Access port located in top of cabinet for external monitoring probe(s)· Integrated evaporation tray· Recessed fl oor

(see photos opposite page)

Pass-Thru Refrigerators Pharmacy/Laboratory and Blood Bank

Shelves· Epoxy-coated wire shelves· Stainless steel shelf standards · Side and rear guards prevent items from falling off the shelf

Roll Out BasketsRoll out baskets also available. See custom storage options.

4

Cabinet Constructioni.Series®

· Stainless steel interior (blood bank)

i.Series® and Horizon Series™

· Exterior and door handle(s) are galvannealed steel with bacteria- resistant powder coating· Covered top on clean room side for placement in sterile environments· Superior engineered frame for maximum rigidity· Heated, dual-pane, insulated glass door(s)· Self-closing Sure-Seal door system eliminating door pops· Standard key lock· Interior lighting with control panel mounted switch· Minimum of 2” (51mm) non-CFC foamed urethane insulation· Dual, swivel locking casters· Access port located in top of cabinet for external monitoring probe(s)· Integrated evaporation tray· Recessed fl oor

Dual, swivel locking casters Key lock for securing inventory

Blood Bank

Blood Bank Pass-Thru Refrigerators are designed for use in storing blood bags when access is needed from multiple locations. The bacteria-resistant powder coating prevents surface contamination for a safer storage environment. Adjustable two-way drawers allow easy access to product from both sides of the refrigerators.

Standard Features

Temperature Control and Monitoringi.Series®

· i.Center® Monitoring System, described on page 6· Two stainless steel monitoring probes in product simulation bottles

Horizon Series™ (blood bank)· Microprocessor temperature controller with an independent alarm/ monitor, described on page 6· Single, stainless steel monitoring probe in product simulation bottle

i.Series® and Horizon Series™

· Digital microprocessor temperature controller factory set to 4°C with the following features: - Independent from the i.Center®

- Temperature probe mounted in the chamber - Digital offset adjustment for calibration· 4” (102mm), 7-day circular chart recorder with the following features: - Inkless, pressure-sensitive chart paper with a range of -5°C to +20°C - Electronic drive mechanism for consistent results - Battery backup ensures continuous operation - Touch button controls for chart changes and calibration

Drawersi.Series®

· Coordinated drawer handles with built-in ledge for labels

i.Series® and Horizon Series™

· Adjustable, two-way, solid stainless steel pull out drawers· Drawer mid-stop catch ensures proper closure to maximize airfl ow, maintain temperature uniformity, and protect glass doors from slide throughs· Drawers are 4” (102mm) high · Durable, liquid-tight construction for containment of spills· Stainless steel drawer standards guard against rust and corrosion· Scratch-Guard edge protectors keep glass doors from being scratched by drawersRefrigeration System

· Heavy-duty, air-cooled refrigeration system· Forced-air circulation maintains chamber uniformity of +/-1°C and provides quick recovery after door openings· Non-CFC, commercially available refrigerant· Automatic condensate evaporator is standard· Internal evaporator fan(s) shut off during door openings

Covered top on clean room side Integrated drip tray

5

i.Series® Horizon Series™

Pharmacy / LaboratoryHorizon Series™ Blood Bank

Alarm/Monitor Alarm/Monitor Alarm/Monitor

i.Center™ advanced alarm / monitor Microprocessor-based controller with alarm/monitor Microprocessor-based controller with alarms

· i.Center LCD viewscreen· Automatic high/low alarm testing (Peltier based)· Password protected confi guration· Dual temperature probes* · Digital display of upper and lower chamber temperatures*· Ev ent l og records door openi ngs and al arm conditions with date and time · LCD 24-hour temperature graph· Dry contact alarm connection· Digital calibration· Flash memory upgradable· Battery backup with continuous auto battery check· Date and time display· Alarm mute with adjustable ring-back interval· Adjustable alarm volume· Four al arm opti ons: s ingle, doubl e, tri ple, and continuous beep· Optional RS232 data port· High and low temperature alarms· Door ajar alarm· Power failure alarm· Condenser termperature alarm· No battery alarm· Low battery alert**· Change chart paper alert**

· LED digital display· Manual alarm test

· Single temperature probe· LED digital display of upper chamber temperature

· Dry contact alarm connection · Digital calibration

· Battery backup

· Alarm mute with 5 minute ring-back interval· Alarm silence with key switch

· High and low temperature alarms· Door ajar alarm· Power failure alarm

· LCD viewscreen· Manual alarm test

· Password protected confi guration· Single temperature probe· Digital display of upper chamber temperature

· Dry contact alarm connection · Digital calibration

· Battery backup

· Date and time display· Alarm mute with adjustable ring-back interval· Adjustable alarm volume· Four alarm options: single, double, triple, and continuous beep

· High and low temperature alarms· Door ajar alarm· Power failure alarm

· Change chart paper alert**

Cabinet Cabinet Cabinet· Interi or: Stai nless s teel (bl ood bank) / Powder-coated (pharmacy)· Exterior: Powder-coated· Sure-Grip coordinated drawer handles

· Contoured bezel

· Interior: Powder-coated

· Exterior: Powder-coated· Standard door handle(s)· Standard metal drawer handles· Powder-coated metal bezel

· Interior: Stainless steel

· Exterior: Powder-coated· Standard door handle(s)· Standard metal drawer handles· Powder-coated metal bezel

i.Center®

i.Series® refrigerators are monitored with Helmer’s exclusive i.Center® technology. The i.Center® constantly monitors the chambertemperature and critical refrigerator functions, safeguarding the products inside and providing valuable information to the user. A large, digital viewscreen provides easy access to all i.Center® functions and features.

Controller / Alarm MonitorThe Horizon Series™ microprocessor temperature controller with independent alarm/monitor provides a controlled, stable temperature environment for products stored in your refrigerator. Audible and visual high/low temperature alarms add the security of constant monitoring.

i.Series® / Horizon Series™ Comparison

Controller / Alarm MonitorThe Horizon Series™ microprocessor temperature controller with alarm/monitor provides a controlled, stable temperature environment for products stored in your refrigerator. The LED display is easy to read and settings are adjustable.

6

Model/Series Operating Range Doors Bag

Capacity*

Volume(cu ft /liter)

Interior Dimensions (w x h x d) (in/

mm)

Exterior Dimensions** (w x h x d) (in/mm) Shelves Drawers Compressor Electrical Net

Weight

iPR225i.Series

2º to 10ºC 2 -26.5 / 750

24.75 x 58.25 x 32629 x 1480 x 813

29 x 80 x 36737 x 2032 x 915

3 3.33 HP Air-CooledR134A Non-CFC

115V 60Hz 8.5 FLA530 lb241 kg

HPR225Horizon Series 2º to 10ºC 2 -

26.5 / 750

24.75 x 58.25 x 32629 x 1480 x 813

29 x 80 x 36737 x 2032 x 915

3 3.33 HP Air-CooledR134A Non-CFC

115V 60Hz 8.5 FLA525 lb238 kg

iPR456i.Series

2º to 10ºC 4 -58 / 1642

55 x 58.25 x 321397 x 1480 x 813

59 x 80 x 361499 x 2032 x 918

6 6.5 HP Air-CooledR134A Non-CFC

115V 60Hz 13.5 FLA795 lb361 kg

HPR456Horizon Series

2º to 10ºC 4 -58 / 1642

55 x 58.25 x 321397 x 1480 x 813

59 x 80 x 361499 x 2032 x 918

6 6.5 HP Air-CooledR134A Non-CFC

115V 60Hz 13.5 FLA790 lb359 kg

iB225i.Series

2º to 10ºC 2 43226.5 / 750

24.75 x 58.25 x 32629 x 1480 x 813

29 x 80 x 36737 x 2032 x 915

- 6.33 HP Air-CooledR134A Non-CFC

115V 60Hz 8.5 FLA575 lb261 kg

HB225Horizon Series

2º to 10ºC 2 43226.5 / 750

24.75 x 58.25 x 32629 x 1480 x 813

29 x 80 x 36737 x 2032 x 915

- 6.33 HP Air-CooledR134A Non-CFC

115V 60Hz 8.5 FLA570 lb259 kg

iB456i.Series

2º to 10ºC 4 86458 / 1642

55 x 58.25 x 321397 x 1480 x 813

59 x 80 x 361499 x 2032 x 918

- 12.5 HP Air-CooledR134A Non-CFC

115V 60Hz 13.5 FLA850 lb386 kg

HB456Horizon Series

2º to 10ºC 4 86458 / 1642

55 x 58.25 x 321397 x 1480 x 813

59 x 80 x 361499 x 2032 x 918

- 12.5 HP Air-CooledR134A Non-CFC

115V 60Hz 13.5 FLA845 lb383 kg

Pass-Thru Refrigerator Specifi cations

Specifi cations subject to change Certifi ed to UL and CSA standards by a NRTLMeets AABB, ARC, and FDA standards for blood storage* Capacity based on blood bag volume of 450ml** Add 4” (102mm) to depth for door handles

Pass-Thru Refrigerator shown with shelves, roll-out baskets, and storage trays

Custom Storage Options

For maximum versatility, Helmer refrigerators can be customized with any combination of roll out baskets, drawers, and shelves.

Roll Out Basket with Hardware

Epoxy coated wire baskets are 4” (102mm) high and adjustable in 1” (26mm) increments. Maximum load 100 lb (46 kg) per basket.

Full Size Shelf with HardwareEpoxy-coated wire shelves are adjustable in 1” (26mm) increments. Maximum load 100 lb (46 kg) per shelf.

Solid Stainless Steel Drawer with HardwarePull out drawers are 4” (102mm) high and adjustable in 1” (26mm) increments. Maximum load 100 lb (46 kg) per drawer. i.Series® and Horizon Series™ drawers available.

0086

7

Distinctly

14395 Bergen Boulevard ∂ Noblesville, IN 46060 USAToll Free (U.S. and Canada): 800.743.5637Phone: +1.317.773.9073 ∂ Fax: +1.317.773.9082Email: sales@helmerinc.com Ω www.helmerinc.com

Helmer®, i.Series®, i.Center®, Horizon Series™, and Rel.i™ are registered trademarks or trademarks of Helmer, Inc. in the United States of America

© 2010 Helmer, Inc. 380222-1/B 4/10

Options & Accessories

Heated Glass DoorRemoves fogging and condensation in humid environments

Solid Door OptionIdeal for storage of light-sensitive products

Left-Hinged Single DoorAvailable for single door refrigerators

SkirtMounts to bottom of refrigerator on clean room side, sealing space between refrigerator and fl oor.

Temperature ValidationPackage certifi es the temperature performance of the refrigerator. This option must be ordered at the time the unitis purchased.

Certifi cate of CalibrationCertifi cate for all instrumentation used to test and calibratethe unit. This option must be ordered at the time the unit is purchased.

Stainless Steel Interior Specify when ordering

Custom Access Port1.75” (45mm). Specify location

Temperature Chart Recorder4” (102mm), 7-day inkless chart recorder. Includes battery backup and a supply of 52 charts. Factory installed.

Chart Recorder Paper4” (102mm) diameter, -5°C to +20°C, package of 52

Remote Alarms (RA1 and RA4)Extends existing alarms to remote locations within the facility. The RA1 monitors one device or zone and the RA4 monitors up to four devices or zones. Operational up to 3000 ft / 915m away (wiring not included).

Storage TraysRefrigerator trays from Helmer simplify and organize your storage needs. Each tray comes with dividers and rails so that individualstorage areas can be customized. Several sizes available

Floor Bracket KitSecures unit to the building fl oor. The unit has factory threaded mounting holes. Heavy-gauge, powder coated steel fl oor mounting brackets and cabinet anchor hardware are provided. Customer to provide fl oor anchor hardware and onsite assembly.

Adapter Kit for Remote LocksRemote lock compatible door handle(s) designed to work with select remote lock systems.

Warranty

i.Series® / Rel.i™ Plus7 years compressor / 2 years parts / 1 year labor

Horizon Series™ / Rel.i™

5 years compressor / 2 years parts / 1 year labor

Warranties applicable in the U.S. and Canada.For International warranty information, contact your local distributor.