Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
86 Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.
6 PtSKU 1103577 999937320
Pitman Arm and Ball Joint Front End Service KitSKU 900820 119 9927181• Services Pitman Arm, Tie Rod and Ball Joints• Includes: Pitman
Arm/Tie Rod End Puller, Ball Joint Separator, Pitman Arm Puller, Ball Joint/Tie Rod End Remover
• Comes in a Sturdy Blow Mold Case
23 Piece Hub Bearing Remover and Installer KitSKU 094804 259 99 27205• Removes and Installs
Wheel Bearings with Steering Knuckle and Strut Assembly Still on the Vehicle, Eliminates Need for Alignment
Hub Bearing
Pitman Arm Puller
CV Axle Nut Sockets
GM Upper Control Arm Knock Out Tool SKU 420336 27 9924210• Services Chevrolet and
GMC 1/2, 3/4 and 1 Ton, 2 and 4 Wheel Drive Trucks (1989 to 2001) and All Wheel Drive Chevrolet Astro and GMC Safari Vans (1990 to 2002)
Tomcat Air-Assisted Multiple Camber Adjustment ToolSKU 360484 229 99DOWTC614
Suspension
OTC Hub Grappler™ Wheel Bearing PullerSKU 096847 57999OTC6575• Complete Solution for Servicing Wheel Hubs and
Bearings on the Vehicle without Removing the Steering Components or Knuckle - Eliminates Unnecessary Alignments or the Use of a Shop Press
• Applies Maximum Force with Minimal Effort from an Impact Gun
Torsion Bar Tool
GM, Ford, Chrysler Torsion Bar ToolSKU 1103600 69 9937278 • Safely Loads and Unloads 5-lug, 6-lug and 8-lug GM,
Dodge and Ford Torsion Bar Suspensions for Key Replacement• Extended Long
Reach "C-Clamp" for use with 2011 and Higher GM Heavy Duty Trucks
• Includes Ford/Dodge Adapter
Color May Vary
Brake Drum and Rotor PullerSKU 1125878 129 99 25106• Use with Impact Wrench to Remove Hubs,
Drums and Brake Rotors• Includes (3) Hub Adapters for Use with
Most Common Hub Sizes and Types• Jaw Spread Up to 12-3/4" with 5" Reach• Durable Forged Frame Rated to 7 Tons of Pulling
Force for the Toughest Jobs• Drum and Rotor Pulling Arms Feature with Raised
Stops for Use with Ratchet Straps (Not Included)• Easily Adjust the Arms and Set Puller in Place for Tough Pulling Jobs in Tight Spaces
SEE AZTOOL1.COM FOR FULL LINE OF CV AXLE NUT SOCKETS
12 PtSKU 1103460 999937321
10 Piece Master Spring Compressor Strut/Coil Spring Compressor KitSKU 094802 109 9927203 • Used to Compress Most
Sizes of MacPherson Springs and Coil Springs
• Heat-treated for Toughness
• Comes in a Blow Mold Case
Coil Spring CompressorSKU 1103643 39 9937035• Used to Safely Compress
the Coil Spring on Most Cars and Light Trucks
• Can Also Be Used When Installing Coil Spring Spacers
Model 7600 Strut Spring CompressorSKU 547959 1,059 99BRA7600• Handles the Toughest Applications• Min./Max. Spring Diameters: 3.5"/11.5"• No Adapters Required
Cart for BRA7600SKU 547960 439 99 BRA00-0137
Bench Mount for BRA7600SKU 547962 64 99BRA05-0125
OEM Approved by Major
Automakers
Spring Compressors
Air Operated Strut Spring CompressorSKU 544805 769 9924860• Quickly, Easily, and Safely
Compress and Remove Strut Springs for Replacement and Repair of Automotive Strut Components
• Includes Two Interchangeable Plastic-Coated Lower Yokes and a Suspension Strut Clamp
• Adjustable to Fit a Wide Range of Spring Configurations and Diameters
• Foot Controlled Valve• Maximum Air Pressure: 116 psi• Spring Diameters: 4-6.5"• Maximum Load: 2,200 Lb.
StrutTamer™ II Extreme with StandSKU OUTSIDE BUY/EPO 1,289 99OTC6637-ST• Meets the New ASME PASE Standards
for Spring Compressors• Capable of Safely Compressing the
Largest Strut Springs• New Forged Locking Jaws Include
Larger Pads and Offset to Clamp onto and Compress Springs Even Tighter Than Before
• Unique Trunnion Locking Mechanism to Eliminate Arm Movement for Stable Compression
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
Color May Vary
STORE STOCKED
Tie Rod Tools
Inner Tie Rod ToolSKU 094645 19 9925296• Use to Easily Turn Tie Rods• Use with an Extension,
Tighten Nuts on U-Bolt as Needed
• Tool Can Remove Inner Tie Rod without Removing Outer Tie Rod
Inner Tie Rod Tool KitSKU 217377 54 9927185 • Removes and Installs Tie Rod End
on Rack and Pinion Steering• Includes: 1-3/16", 1-5/16" and 1-7/16"
Master Inner Tie Rod Tool SetSKU 344979 1449927178 Works on Both Small Cars and SUVs • Tube Handle Has an Inner Diameter of 2.125" to
Service Small Cars, Pickups and Large SUVs• Includes 12 Crowfoot Style
Adapters, Sizes: 29 mm, 1-3/16", 1-1/4", 32.5 mm, 1-5/16", 33.6 mm, 1-3/8", 1-7/16", 1-1/2", 38.4 mm, 40 mm and 42 mm
• Comes in a Blow Mold Case
Master Inner Tie Rod ToolSKU 080557 139 99LIS46800• Works on Inner Tie Rods with Inaccessible
Wrench Flats• Includes 9 Crowfoot Style Adapters to Work
on Various Applications • Long Socket Slips Over the Tie Rod End and the
Crowfoot Engages on the Socket for Easy Removal and Installation
Inner Tie Rod Tool SKU 291414 9499LIS45750
• 6 Sizes: 1-3/16", 1-1/4", 1-5/16", 1-7/16", 1-1/2" and 33.6 mm
Volvo Shock Retaining Nut Strut Removal Socket ToolSKU 300125 29 9924365• Includes Holding Socket
with “Double D” Axle Center Socket
• Fits Several Volvo Models (1999 to 2010)
Universal Shock Absorber Tool SKU 036202 27 9925038• For Removing and
Installing Shock Nuts• Fits Many
Shock Stems
Shock Tools
MacPherson Strut ToolSKU 1149178 74 99LIS62300• Fits all Strut Spring Sizes,
Import and Domestic• Heavy Duty Clamps and Bolts
Securely Hold Spring During Operation
• Safe, Strong and Universal
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
2,200 Lb. Capacity Floor Mounted Strut CompressorSKU OUTSIDE BUY/EPO 37499CAL91300• For Strut Assemblies on Passenger Cars,
Light-trucks, Vans, and SUV’s.• For Coils 3.5" to 8.75" Wide and Up to 19" High• Can be Used with Varying Coil Diameters Up to 5/8"″• Can Be Mounted to the Floor• Adaptive Spring Bracket Can be Configured
in Multiple Configurations• Safe and Easy, One-person Use
Axle Nut Socket Sets • Includes Sizes: 29, 30, 32,
34, 35, 36, 38 and 39 mm
NEW
NEW
NEW
CHASSIS & SUSPENSION
87Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.
STORE STOCKED
Dodge Hub Locknut SocketSKU 344964 27 9925968• Fits Dodge 1/2-ton Pickup Trucks (1994-Newer)
with Dana 44 Front Axle and Dana 60 Axle with a Vacuum Disconnect
• Designed to Accommodate the 1-11/16" (43 mm) Wheel Bearing Retaining Nut Which is Recessed into the Hub
Toyota 4 Pin Hub Locknut SocketSKU 298224 219925969• Services High Torque Locknuts on Toyota 4WD
Vehicles Having Free Wheel (Lock Out) Hubs• Tacoma (1995-Newer); T100 and 4Runner
(1996-Newer)• Improved Design
with Solid Pins for Increased Durability
5 Piece Tie Rod and Ball Joint SetSKU 1103626 599937201• Used to Remove Tie Rods and Ball Joints• Includes: 11" x 1-1/8",
11-3/4" x 1-5/8", 11-5/8" x 1-7/16", 16" x 11/16", 16" x 15/16"
5 Piece Pickle Fork SetSKU 466511 549925261• Set Includes: Tie Rod
Spreader with 11/16" Wedge Opening, Ball Joint Separator with 15/16" Jaw Opening, Pitman Arm Wedge with 1-1/8" Opening, 8" Handle
Tie Rod End Puller SKU 004463 119925201• Tapered Fork Wedged Ends with
21/32" Opening• Overall Length: 11-7/8"
Ball Joint Separator SKU 004464 119925202• Tapered Fork Wedged Ends with
15/16" Opening
Spindle Nuts
Pickle Forks
GM Axle Hub Nut SocketSKU 298219 349925967 • Applications: GMT900 Silverado, Sierra HDCS, 2-wheel and
4-wheel Drive Cheyenne, Silverado, Escalade, Sierra and Avalanche Trucks with 10.5" or 11.5" Ring Gear
• Has 9 Pins to Fit GM New Style Retaining Nuts• Unapproved Methods Can Damage the Bearing,
or Result in Shorter Service Life
Stepped Pickle Fork Set SKU 291410 6999LIS41400• 6 Tools in One • Includes: 11/16",
15/16", 1-1/8"• Forks and
2 Handles
1/2" Drive Socket Bearing LocknutSKU 231203 219925243 • Fits Adjusting Nuts Found
on Ford F150 Trucks (1995 to 1996) and Full Sized Broncos with Automatic Locking Hubs
STORE STOCKED
Front Wheel Locknut WrenchSKU OUTSIDE BUY/EPO 49 99OTC7090A • For Use with 1973 to 1981
GM 3/4 and 1 Ton 4WD Trucks
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
4WD Spindle Puller AttachmentSKU OUTSIDE BUY/EPO 449933627104• Use with OEMTOOLS® Slide Hammer
#27033 and #37033.• Works on 3/4" and 5/8" Quick
Connect Couplings Found on Ford and Chrysler Vehicles
• 5/8" x 18 Thread Size
Axle Tools
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
Universal Inner C.V. Joint PullerSKU OUTSIDE BUY/EPOOTC7507
49 99
• CV Joint Fork Only
Available via Outside Buy/EPO, Call 1-877-298-6651 for Ordering Instructions
Case Color May Vary
Toyota 8 Pin Front Hub Locknut Socket SKU 298205 349925962 • Allows for Easy Removal and Installation of Front Hub
Lock Nut without Damage to the Nut• Applications
Toyota 4Runner 2WD (2007 to 2014), Toyota Sequoia (2008 to 2014), Toyota Tundra (2007 to 2014)
• 3/4" Drive
5 Lb. Slide HammerSKU 1103572 49 9937033 • Used to Pull Bushings, Seals, Sleeves, Bearings, Flange-type Rear Axles, Front-wheel
Drive Hubs, Dents and Pressed-in Bolts with Two or Three Jaw Puller Options
Color May Vary
Rear Axle Puller SetSKU 094801 119 9927202• Use for Flange-type Rear Axle
and Bearing Removal on Most Late Model Passenger Cars and Light Trucks
Axle Popper KitSKU 514017 69 99STK71410
• Valuable Tool for Transmission Shops, Garages, Tire Shops and Body Shops
• Shim Included in Kit to Fill Larger Gap Found on Some Vehicles
• Applies Even Pressure to Both Sides of Shaft• Safer and Surer Than a Pry Bar
Axle Spindle Threading SetSKU 1103645 59 9937233• Used to Clean or Repair Axle Threads• Set Comes with a Special Twist Shape
that Provides Easier and Quicker Work• Sizes Included: M20 x 1.25, M20 x 1.50, M22 x 1.00,
M22 x 1.50, M24 x 1.50, M24 x 2.00, 13/16" x 20 UNEF, 3/4" x 20 UNEF and 27 mm Extension Bar.
Axle Popper™ IISKU 010119 44 99 STK71415• Tapered on
Both Ends• Fits in Air
Hammer• Increased
Base Size for Additional Strength
• Safer Than a Pry Bar
1/2" Drive (12 mm) Ford Drive Line Impact SocketSKU 420319 219924212• Applications Include Many Ford Drive
Line Bolts• 12 mm, 12 Pt.
Drive Line Impact Socket
Manual Bushing Installation and Removal Tool SetSKU 298214 399 99 27212 • Comprehensive Kit for Fast and Effective
Removal/Installation of Wheel Bearings/Suspension Bushings and Seals
• Allows the Technician to Service a Wide Range of Bushings without Removing Components from the Vehicle
• Comes with 20 Sleeves for Hundreds of Combinations
• External Sleeve Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82 mm
Bushing Tool
3/8" Air Ratchet SKU OUTSIDE BUY/EPO 80-363
VDP ORDERS ONLY
Offer Good Through September 30, 2021
BONUSBONUS VALUE: $49.99
With Purchase of: 27212
STORE STOCKED
Seal PullerSKU 048199 12 9925014• 2 Tips Fit All
Seal Sizes
Seal Tools
Color May Vary
Bearing Race and Seal Master Driver Set SKU 1103639 57 9937119• Installs Most
Standard Wheel Bearings and Races
• Includes Driver Sizes: 1.565", 1.750", 1.965", 2.325", 2.470", 2.555", 2.830", 2.995", 3.180" and Handle
Bearing Race and Seal Driver SKU 1149166 39 99LIS12600• Helps Reduce Damage to Both Race
and Axle Housing• Six Driver Sizes Fit Most
Bearing Race Sizes• Three Larger Drivers Available Separately• Turn Driver Over to Drive Seals
Ball/U-Joint Press with 4WD Adapter SetSKU 1103607 99 99 37089 • Used to Install and Remove Ball
Joints on Most Cars and Light Trucks with Press Fit Ball Joints
• May Also Be Used to Remove and Install U-joints on Most Cars and Light Trucks
Hydraulic Ball Joint SeparatorSKU 177718 11999 25219 • Hydraulic Ram
Rated to 8 Tons• Jaw Capacity:
56 mm (2.25")• Jaw Width: 22 mm (0.86")
3/4" Drive Ball Joint Impact Socket 2-9/64"SKU 462494 27 99 24215 • Used on Chrysler/Dodge
Cars, Light Trucks and Vans
3/4" Drive Ball Joint Impact Socket 1-59/64" SKU 662809 19 99 24238 • Used on Chrysler/Dodge Mid-size Cars,
Light Trucks and Vans
HYDRAULIC BALL JOINT SEPARATOR.
FAST. SAFE. EFFICIENT.
Master Ball Joint Installer/Remover Adapter SetSKU 1103612 1449937310• Expands Capability of Every
OEMTOOLS® Ball Joint Press• Includes All the Receiver Tubes and
Removing/Installing Adapters Needed to Work on Many GM, Ford and Chrysler 2 and 4 Wheel Drive Pick-ups, Vans and SUVs
Master Ball Joint Press - 21 PieceSKU 1142406 129 9925104• Removes and Replaces Press-Fit Upper and Lower Ball Joints
on 2-Wheel Drive (2WD) and 4-Wheel Drive (4WD) Vehicles• Includes Adapters with Specialized Cut-outs to
Maneuver Around Obstructions• Includes Adapters needed for Removing
Upper and Lower Ball Joints on GM, Ford, and Chrysler 2WD and 4WD Light-Duty Trucks, Vans and SUVs
• Heavy Duty Forged Steel Alloy C-Frame for the Toughest Jobs — Ideal for Seized Joints
• Comes in a Sturdy Blow Molded Case for Secure Storage
4WD 4 Lug Spindle SocketSKU 552265 25072
1999
Ball Joint Tools
Transmission/ Transaxle PlugsSKU 298196 219924490• Includes 5 Plugs to Seal Both Transmissions
and Transaxles on Most Import and Domestic Vehicles• Stepped Design for
Retention and Positive Sealing
• Includes Side Gear Centering Pin for Ford Transaxles
NEW
Flange Axle Type Front Hub Puller SKU OUTSIDE BUY/EPO 3499CAL526• For Use on 4, 5, or 6 Bolt Stud Design
and All Non-C Lock GM Axles• For Use on Domestic and Import
Cars and Light Trucks• May be Used With Cal-Van No.498
Flange Type Puller• Range is 3-3/4" to 4-1/2"
NEW