Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
2011 Product Catalog
1 2
Everything you need to equip your fleet tomeet the tough demands of the job
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
1 2
IndexPrisoner Transport Products
Pro-cell Prisoner Transport Systems ..................................................................3-4Prisoner Transport Partitions .............................................................................5-6Transport Seats ...............................................................................................7-8Floor Pans .......................................................................................................7-8Window Armor ..................................................................................................9Rear Door Panels ................................................................................................9Cargo Barriers ..................................................................................................10
Electronic ProtectionFront Passenger, AOI Airbag On/off Control Switches .....................................11-12Side Curtain, AOI Airbag On/off Control Switches ...........................................11-12Safestop Vehicle Anti-theft System ................................................................13-14
Exterior ProtectionStandard Push Bumpers ....................................................................................15Standard LED Push Bumpers .............................................................................15X Push Bumpers ...............................................................................................16Ballistic Door Panels..........................................................................................17Skid Plates .......................................................................................................18
Weapon RacksPartition Mount Gun Racks ...............................................................................19Choosing the Right Gun Rack ............................................................................20Self Supporting Gun Racks ................................................................................21Roof Mounted Gun Racks ..................................................................................22
Organization & Storage ProductsCargo Cabinets .................................................................................................23Trunk Style Duty Gear Organizers ......................................................................24Trunk Trays ......................................................................................................24Seat Style Duty Gear Organizers ........................................................................25Ballistic Ticket Boards .......................................................................................26
STRONG │ RELIABLE │ SECURE
Law Enforcement Products
Everything you need to equip your fleet tomeet the tough demands of the job
Prisoner Transport Products
Pro-cell Prisoner Transport Systems
Pro-gard’s Pro-cell Prisoner Transport Systems offer a higher level of containment than standard partitioned vehicles. Our clear seat divider attaches firmly to both the seat and partition, creating a sturdy barrier through the middle of the prisoner transport area. Prisoners are confined to a smaller area of the rear seat which, offers better control of thrashing around.
Our patented design can be ordered in three different styles. All provide the maximum protection for your officers as well as prevent prisoners from stashing contraband. These easy to clean, fully contained systems minimize cracks and crevices where paraphernalia and evidence can otherwise be stuffed.
Our single transport systems offer an added benefit for officer comfort because they do not limit driver seat positions like standard partitions. While our dual transport system offers the unique means to safely confine two prisoners during transport, eliminating the need for a second vehicle.
Optional Gun Racks for both single and dual Pro-cell Prisoner Transport Systems
P1000 ½ Cage, Single Prisoner Transport System
P1500 ½ Cage, Single Prisoner TransportSystem with Full Roll Bar
P1826 Full Cage, Dual Prisoner Transport System
• Offers the full safety benefits of a prisoner transport partition and more without compromising seating space for the officer or the prisoner; this system allows full recline and travel of the driver seat because there is no partition located directly behind the driver’s seat
• Mount single or dual weapons with a G6300 Series Pro-cell Weapon Mount (see page 20 for more information)
• Clear, Polycarbonate Divider compartmentalizes the prisoner area and provides additional storage space behind the driver’s seat
• Offers the full safety benefits of a prisoner transport partition and more with minimal compromise to officer or prisoner seating space; allows for full recline of the driver seat with the added benefit of full roll bar partition coverage
• Mount single or dual weapons with a G6300 Series Pro-cell Weapon Mount (see page 20 for more information)
• Clear, Polycarbonate Divider compartmentalizes the prisoner area and provides additional storage space behind the driver’s seat
• Offers the full safety benefits of a prisoner transport partition and more
• Eliminates the need for a second transport vehicle when transporting two prisoners while keeping them completely confined and separated from one another
• Ideal for male/female or adult/juvenile transports• Mount single or dual weapons with a G5000 Series Weapon
Mount (see page 20 for more information)
3 4
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
Pro-cell Prisoner Transport Systems
P1000 Pro-cell shown in a 2011 Dodge Charger
Clear ⅜” Polycarbonate divider attaches to both seat and partition to provide a solid barrier down the middle of the prisoner area
Pro-cell Prisoner Transport Systems are available in three distinct styles to match your agency’s preference, each system comes complete with• (1) Prisoner Transport Partition• (1) Set of Extension Panels/Seat Protectors• (1) Prisoner Transport Seat• (1) Floor Pan• (1) Clear, Polycarbonate Seat Divider• (1) Pair, Window Armor• (1) Pair, Rear Door Panels
Each Pro-cell comes with a solid steel, Prisoner Transport Partition that provides a protective barrier between the prisoner transport and officer areas
Floor Pans provide an
added layer of protection against stashing contraband by enclosing the foot area and removing gaps between the seat and floor area
3 4
Rear Door Panels further confine prisoners by eliminating access to
window controls and door latches
Window Armor provides a solid frame that protects
side windows from being kicked out or
shattered from the inside
Prisoner Transport Seats inhibit a prisoner’s ability to stash contraband between cracks by
providing a continuous, solid surface
Seat belt pucks provide a barrier around the factory
seat belt to further eliminate potential locations for hiding
contraband and other evidence
See the following five pages for more specific
information about each of the individual
components of ourPro-cell Systems
ABS Seats and Floor Pans are designed to drain
through the floor board allowing for easy cleaning
and sanitizing
Prisoner Transport Products
Partitions
Choose from two styles of wings that accommodate either shutting off side curtain airbags or leaving them active
Rigid wings must be used with AOI Airbag On/off Control Switches if vehicle has side curtain airbags (see page 11-12 for more information)
Flexible wings yield against the force of a side curtain airbag yet provide ample
resistance in limiting access to the front passenger area
Variety of window configurations to meet your agency’s preference:
Passenger ½ Sliding Stationary Polycarbonate Center Sliding Full, 7 Gauge Steel Wire ½ Polycarbonate, Polycarbonate Window Window Polycarbonate Window Screen Window ½ Expanded Metal Window
Vented Polycarbonate Stationary Polycarbonate Polycarbonate Center Sliding ½ Slider Polycarbonate Solid Window Window & Center Window w/ Expanded Window w/ Expanded Metal Insert Metal Insert Metal Insert
Durable Polycarbonate windows are easy to clean Choose from up to nine different window configurations (shown above)
Rugged steel wire used in all expanded
metal window inserts
Sturdy, 14 gauge steel construction provides ample resistance against even the most aggressive transports
Coated foam padding resists snags and tears of normal wear and tear
Optional Accessories are available as well:
Recessed Panels andExtension Panels/Seat Protectors
Recessed Panels for verticalmounted Gun Racks
Horizontal mounted Gun Racks
5 6
Anodized aluminum window frames are easy to clean and resist corrosion
Ergonomic window latches are easy to open from driver’s position
Optional Recessed Panels for mounting
Vertical Gun Racks
Optional Lower Extension Panels
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
Choose from two styles of wings that accommodate either shutting off side curtain airbags or leaving them active
Passenger ½ Sliding Stationary Polycarbonate Center Sliding Full, 7 Gauge Steel Wire ½ Polycarbonate, Polycarbonate Window Window Polycarbonate Window Screen Window ½ Expanded Metal Window
Vented Polycarbonate Stationary Polycarbonate Polycarbonate Center Sliding ½ Slider Polycarbonate Solid Window Window & Center Window w/ Expanded Window w/ Expanded Metal Insert Metal Insert Metal Insert
Nothing is more important than maintaining control over a prisoner during transport. Our Prisoner Transport Partitions are designed to give your officers peace of mind about prisoner confinement. Their rugged steel construction provides a secure barrier between the prisoner transport and officer areas that withstands even the most aggressive assaults.
Pro-gard offers both a Universal, Sedan Partition and a Universal, SUV Partition that fit all Police Package vehicles*. These partitions are designed to be transferable from one vehicle to another with the simple addition of a transfer kit. Pro-gard has been working very closely with all the major manufacturers to ensure that these economical partitions will not only fit your current cruisers but the ones you plan to purchase in the coming years.
Universal Partitions shown with Recessed Panel and Extension
Panels in a 2012 Ford Interceptor
5 6
* Universal Sedan Partitions will fit current Crown Victorias, Impalas, Chargers, and upcoming Sedan Interceptors, and Caprices. Universal SUV Partitions will fit Expeditions, Explorers, Tahoes, F150s and upcoming Utility Interceptors.
Prisoner Transport Products
Transport Seats & Floor Pans
Contoured Seat and Floor Pan shown in a 2011 Crown Victoria
Molded from sturdy ABS plastic, our seats and floor pans fit the curves and contours of each different vehicle. Our seats and floor pans are designed to provide a continuous surface in the prisoner seating and foot area that makes for quick, easy cleaning and sanitizing that reduces concerns about contamination from biohazards. Our floor pans are made to drain via the floor of the vehicle so that cleaning can be as easy as sudsing up the seating area and flushing with a hose.
Sturdy enough to stand up to repeated assaults but comfortable enough to even transport personnel in comfort. Our Transport Seats and Floor Pans are designed to fit snug against one another as well as against vehicle molding to prevent prisoners from stashing contraband and evidence. By eliminating the cracks and crevices of factory seating you can maintain better control of evidence that might otherwise be lost.
With the transport areas shrinking in most police vehicles, our seats can increase the leg room for passengers in the rear seating area over OEM seats significantly. This means more foot room for prisoners as well as better control for your officers when placing prisoners in the vehicle.
7 8
Standard Seat shown in Chevy Tahoe
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
Pro-gard’s Transport Seats and Floor Pan meet and exceed NHTSA’s requirements for fire retardation and passenger restraint specifications. Our Crown Victoria Seats offer a unique design that accommodates Ford’s
Fire Suppression System.
Pro-gard’s Seat Belt Pucks seal the opening around the OEM seat belts to prevent stashing contraband/
evidence in a usual and convenient hiding place
Standard Back Seat
Floor Pans
Contour Back Seat
Our Contour Back design provides increased comfort for prisoners when behind the back cuffing procedures are necessary
Pro-gard’s Transport Seats are designed to work seamlessly with
our Floor Pans to provide the maximum protection against
stashing contraband/evidence by eliminating gaps between the seat and floor board
Drain holes in the bottom of each floor
pan match up with existing OEM channels
to make for easy installation
Molded from high
strength ABS material that can take the daily abuse of transporting
prisoners
7 8
Drain hole grommets are provided with every floor pan to provide a watertight seal between the pan and undercarriage that allow for easy drainage when cleaning the prisoner transport area
Pro-gard’s Floor Pans
work seamlessly with our Transport Seats to eliminate stashing contraband/evidence
Foam padding provides added comfort for transports
Our Straight Back design features the traditional seat style that agencies have relied on for years
Our seats and floor pans are designed specifically for each vehicle to ensure that there are no gaps around
the seams that create potential locations for prisoners to stuff contraband/evidence.
All of our seats and floor pans are molded from one seamless piece of plastic so that there are no seams for stashing contraband
Prisoner Transport Products
Window Armor & Rear Door Panels
Steel Bar Window Armor shown on a 2011 Dodge Charger
Polycarbonate is reinforced with a steel frame that prohibits flexing while maintaining a less
aggressive look*
Rugged Steel Bars provide maximum protection*
Pro-gard’s Window Armor is designed to withstand the force of a prisoner trying to kick their way out of the vehicle. Choose from steel bars or reinforced polycarbonate panels*.
Our Rear Door Panels eliminate prisoner access to window controls and door latches from inside the vehicle. This further prevents their ability to escape from confinement.
Window Armor is quick and easy to install and can be used with
OEM door panels or Pro-gard’s smooth surface, Rear Door
Panels
Our Rear Door Panels are an attractive alternative to OEM door panels
Will not interfere with side curtain airbag deployment
9 10
Choose from two window armor options to match your
agency’s preference
Rear Door Panels eliminate access to
door latches from inside the vehicle
Stop the costly cycle of replacing rear-side windows because of prisoner destruction
Eliminate access to window controls from the rear seat
*available for select models
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
Cargo Barriers
¼” Polycarbonate Window
7 Gauge, Steel Wire Window
When transporting loose equipment is part of the job, choose Pro-gard’s Cargo Barriers. They offer a safer means to secure the rear end of your SUV from the passenger compartment.
Mounts to floor
and roof utilizing
pre-existing OEM holes
for an easier installation
Rugged steel panels
are easy to clean and resist corrosion
If you are planning to use one of our Cargo Barriers with a Pro-gard Prisoner
Transport Seat in your SUV, we offer special package pricing (see pages 7-8 for more information about our Prisoner
Transport Seats)
Polycarbonate Window, Cargo Barrier in a Chevy Tahoe
9 10
Choose from two window configurations to match your agency’s preference
Pro-gard’s Cargo Barriers are the perfect companion if you are using a Cargo Cabinet in the back of your SUV
Pro-gard offers two standard Cargo Cabinet designs that feature dual gun racks
(see page 23 for more details about our cabinets)
Mounts outside of side curtain airbag deployment zones
Electronic Protection Products
AOI Airbag On/off Control Switches
Pro-gard’s patented, highly visible, LED indicator lights indicate when airbag protection is turned off or on
Key operated switches can be turned off to protect equipment
or on to protect passengers as needed (airbags should remain turned
off anytime equipment is mounted in the airbag deployment zone)
OEM Plug-and-Play adaptors for police package vehicles make for quick and easy installation
Small profile box fits easily under the dash or
other confined spaces
Each switch is tested to 100,000 cycles to ensure quality and reliability
Our patented design switch is available for both dual and single stage airbags
Products such as laptops, LPR systems, cameras, video equipment, and radar equipment mounted in the front passenger airbag’s deployment zone can become potential hazards in the event of a crash.
Pro-gard’s AOI Airbag On/off Control Switches meet and exceed all federal
requirements
NHTSA will allow vehicles used in emergency situations to install airbag on/off switches
Optional remote status lights are available when mounting the switch in glove boxes, under dash, or other “invisible” locations to keep switch in compliance with NHTSA regulations for warning light visibility
No more conflicts between aftermarket equipment and airbag deployment zones
11 12
Most municipal insurance plans already compensate
for airbag on/off controls
Side Curtain Airbag On/off Switch provides means to shut off airbags when gun racks or rigid wing partitions are present in the airbag deployment zone
Front Passenger Airbag On/off Switch provides means to shut off airbags when radar, cameras, LPR systems, and other aftermarket equipment is mounted in the airbag deployment zone
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
The sheer force of an airbag deployment is extremely powerful. So much so that it can cause objects in its path to become dangerous projectiles.
Pro-gard’s patented, Airbag On/off Control Switches provide officers the security they need to do their job without the fear of conflicts between the airbag deployment zones and the aftermarket equipment mounted in those areas.
Our airbag control switches also offer fleet managers the peace of mind to know that damage to this expensive equipment can be greatly minimized by the absence of an airbag deployment.
Eliminate Conflicts with ANY Rigid Wing PartitionRigid wing partition panels are not designed to give easily under the force of an airbag deployment. It is possible that they can snap loose (or into many pieces) and become projectiles in the event of an airbag deployment. By shutting off the side curtain airbags, fleets who prefer this partition design can still use their preferred equipment style without fear of an airbag deployment.
Eliminate Conflicts with ANY Roof Mounted Gun RackLikewise, side curtain airbags may deploy from the area where roof mounted gun racks connect to the vehicle’s headliner. In such cases, should an airbag deployment occur, the consequences could be catastrophic if a weapon or part of the gun rack becomes a projectile object. This gun mounting style can be safely utilized when an AOI Airbag On/off Switch is used to shut off the airbag.
Eliminate Conflicts with Aftermarket EquipmentMuch of the aftermarket surveillance equipment that is becoming necessary mainstays for officers to perform their duties is mounted in the front passenger airbag deployment zone for obvious reasons. However, should there be an airbag deployment, what happens to this equipment? As with the above two situations, it can and usually does become a projectile object. Installing a front passenger AOI Airbag On/off Control Switch can eliminate this potential hazard, not only protecting your officers but also this costly equipment, and possible bystanders.
No more conflicts between roof mounted weapon racks and airbag deployment zones
No more conflicts between airbags and rigid wing partitions
11 12
AOI Electrical, LLCA Pro-gard Products Company
“The Switch”
TM
AOIMAKE A SWITCHTO THE SWITCH
Over 50,000 currently in use!
Electronic Protection Products
Safestop Vehicle Anti-theft SystemsVehicle thefts are on the rise and police fleets have not been spared this concern. Almost daily, police vehicles fall victim to vehicle theft. Because officers must often leave their vehicles running unattended, their vehicles can be an easy target for theft.
Pro-gard’s Safestop Vehicle Anti-theft System provides the necessary protection against such theft without requiring officers to remember additional steps for activating the theft protection. With the system turned on, simply removing the key activates our system.
Because our system can remain on continuously, Safestop is capable of protecting your cruisers 24/7 whether running or not. And it is the only system one on the market that can provide additional protection for your gun racks and trunk contents.
13 14
This feature will protect the contents of the trunk from being accessed via the factory trunk latch release as long as the Safestop Anti-theft System is activated
Once the Safestop Vehicle Anti-theft System is activated, anytime that the key is removed from the ignition, the vehicle will be protected from theft as well as gun locks and
trunk contents
The Safestop Anti-theft System is activated through a toggle switch that can literally be
turned on once and left on for as long as the anti-theft system is installed in
the vehicle, there is no need to ever shut it off
Trunk Lock Secure
This feature will protect your weapons mounted in an electronic gun rack from theft anytime the Safestop Anti-theft System is activated, even when
the momentary switch is pressed
Gun Lock Secure
24/7 Always On ProtectionThe key is the KEY
A Pro-gard Products Company
®The key is the KEYto preventing cruiser theft
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
Vehicle maintains functionality of all electronic functions including:• Air-conditioning and heat• Surveillance Equipment (cameras, radar, etc)
• Radios• Lights and Sirens• Computers
Low profile housing fits neatly and discretely out of sight, underneath dash
Plug-and-Play adaptors easily integrated into the vehicle ignition system for quick and easy installations
Extremely low amp draw means that the system can be left activated 24/7 without worries of battery drain
13 14
If there is property damage or personal injury involved, the true cost of replacing a stolen vehicle can far exceed just the vehicle replacement/repair costs
Once the system is turned on, the anti-theft functions allow the vehicle to remain running even after the ignition key is removed
With the ignition key removed the shifter is locked and the anti-theft functions cannot be overridden, even if the toggle switch is turned off
Step one turns the system on via a toggle switch that can be left on indefinitelyStep two activates the anti-theft functions anytime
the ignition key is removed while the system is turned on
Unit connects to the ignition system and offers additional connections for protecting both gun racks and trunk contents
Exterior Protection Products
Standard Push BumpersStudies have shown that prompt removal of disabled vehicles from traffic patterns can greatly reduce chances of additional accidents occurring. The addition of a Pro-gard Push Bumper allows for safe and easy removal of such vehicles.
We’ve designed our push bumpers with wear and tear in mind. Our Standard Bumper features a rugged steel design that allows you to softly push stranded vehicles to safety without fear of compromising the bumpers structure.
Our wrap around style X Push Bumpers are designed extra large to provide full coverage for the front
Black powder coated finish prevents corrosion from salt spray and other environmental conditions
Patented design features “No Holes Drilled” installation and uses existing OEM holes
and slots to mount bumper for a quick and easy installation
Integrated mounting design will
not interfere with the SRS airbag system
New welded frame construction cuts down on
installation time
Integrated LED Lightbar OptionWhelen® Dominator™ LED Lightbar (6 LED on sedan bumper and 8 LED on SUV bumper) available in three options: all red, all blue, or ½ red/½ blue
Precut holes and slots for
mounting auxiliary lighting and speakers
Rugged steel construction ensures a longer, more durable life for the bumper
Mar resistant rubber padding
provides an added layer of protection
between bumper and vehicle being pushed
15 16
Standard LED Push Bumper shown on 2011 Dodge Charger
SUV version features a larger profile that offers a more robust coverage of the grill area
40% wider and 20% taller than sedan version
Standard Push Bumper shown on 2011 Chevy Tahoe
Sedan Push Bumper
SUV Push Bumper
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
X Push Bumpers
Mounting system keeps bumper in balance even when performing PIT maneuvers
Made from heavy duty aluminum that is strong enough to endure impacts yet lightweight enough to not hamper vehicle gas mileage
Black powder coated finish resists salt spray and other environmental conditions
Solid state construction is stamped from a continuous sheet of aluminum that prevents the bumper from twisting or flexing into the vehicle that can cause scuffs and scratches to vehicle
Custom fit designs for each police package vehicle makes for a more solid fit and tailored look
15 16
XPush Bumper shown on 2011 Chevy Tahoe
grill and headlight area against animal strikes and debris.
Our bumpers mount in a manner that does not compromise the vehicles structure or frame, and will not throw the vehicle off balance when pushing other vehicles to safety.
Black Powder Coated finishes protect bumpers from environmental elements and salt spray that can cause corrosion.
Whether you choose the Standard Push Bumpers for their rugged steel construction and conventional design or our wrap around style X Push Bumpers for their large profile, you can rest assured that installation will be both quick and easy.
Broad, oversized design helps to protect entire front end of vehicle
from front on animal strikes
Provides an added layer of
protection to vital engine and cooling components from
obstacles in vehicle’s path
Wrap around design protects front quarter panels and headlights from debris and animal strikes
Exterior Protection Products
Ballistic Door PanelsIt seems that criminals are getting braver these days and many officers have found themselves needing extra protection from weapon fire. Give your officers added protection on their most dangerous beats with our NIJ Level IIIA rated ballistic door panels.
Custom fit to vehicle types for full door coverage. Pro-gard’s drop-in door panels are easy to install and are the perfect addition to any cruiser that comes in the line of fire.
Will not interfere with window operation
Bolt in design requires no vehicle modifications and easy installations
Panels bolt onto the door between the exterior wall and the interior panel for a seamless look
Door panels are tested to NIJ Level
Testing Standards
Panels are tested against humidity and temperatures
Custom cut panels are cut to fit the curves of specific police package vehicles and offer up to
16% more coverage than factory panels
17 18
Results from a shot car doorand a shot panel
NIJ IIIA Kevlar panels are up to 50% lighter than Ford’s factory option
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
Skid Plates
Custom designs to fit individual police package vehicles
Common maneuvers like pulling off the road for routine traffic stops and cutting through medians can take a serious toll on the undercarriage of police package sedans.
Adding an extra layer of protection underneath these cruisers can be a wise investment towards protecting vital components like transmissions and oil pans from the daily grind of pulling onto the shoulder, cutting through medians, high speed pursuits, and pushing stranded vehicles off medians.
Rugged steel construction stands up against daily wear and tear of off road driving and median/shoulder traffic stops
“No Holes Drilled” installation utilizes existing factory holes and slots for a quick and easy installation
Black powder coated finish on steel skid plates resists corrosion from salt spray and other environmental conditions All skid plates allow for quick
and easy access for routine maintenance like oil changes without removing the skid plate
17 18
Skid Plate shown on Chevy Impala
Charger Skid Plate
Impala/Caprice Skid Plate
Ford Crown Victoria Skid Plates
Transmission Cover keeps dirt and debris out of transmission housing
Rear Skid Plate keeps
dirt and debris from
kicking up underneath
back bumper and rear wheel
areas
Provides an added layer of protection for vital components that are otherwise exposed
Weapon Racks
19 20Partition Mounted
Horizontal Partition Mount
Recessed Partition Mount
Vertical Partition Mount
Pro-gard’s most popular mounting style for gun racks is the Partition Mount. Offered in three styles, guns are within easy reach of your officer when they need quick access to their weapons. All gun racks come with 8 second timers and momentary switches to ensure a quick release when time is critical.
Available for single weapons only
Momentary switch with 8 second delay timer on gun lock allows for quick access to weapons with the simple touch of a button
Custom fit to your specific
weapon helps to eliminate road
rattle
“No Holes Drilled” installation
Durable, powder coated steel construction
Available for single or dual weapons
Choose from three different styles of gun lock keys
Momentary switch with 8 second delay timer on gun lock allows for quick access to weapons with the simple touch of a button
Custom fit to your specific weapon helps to eliminate road rattle
“No Holes Drilled” installation
Durable, powder coated steel construction
Available for single weapons only
Momentary switch with 8 second delay timer on gun lock allows for quick access to weapons with the simple touch of a button
Custom fit to your specific weapon helps to eliminate road rattle
“No Holes Drilled” installation
Durable, powder coated steel construction
Horizontal Mount shown in Chevy Impala
Recessed Mount shown in Chevy Tahoe
Vertical Compact Mount shown in Ford F150
Choose from three different styles of gun lock keys
Choose from three different styles of gun lock keys
Don’t forget to purchase a Safestop Vehicle Anti-theft System to protect weapon racks when officers must step away from their vehicles (see pages 13-14 for more details about the Safestop Vehicle Anti-theft System)
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
Front Passenger SeatFloor Mount
Horizontal PartitionMount Roof Mount
Vertical PartitionMount
TrunkMount
Self SupportingMount
19 20Choosing the Right Gun Rack for your Weapon(s)
Step 1:What type of vehicle will the gun rack be placed in?
Step 2:Where will you be mounting the gun rack?
Because all manufacturers create different interiors in their vehicles, we must accommodate these differences with our gun rack mounts.
Therefore, the year, make and model of vehicle determines our first step in building your customized gun rack.
Pro-gard offers many different locations for you to mount your gun rack in the vehicle. Our three most popular locations are the Partition Mount, Self Supporting Mount, and the Roof Mount. We also offer Pro-cell Mounts and Trunk Mounts if that is your preference.
Step 3:What type of weapon(s) are you planning to house in your gun rack?Obviously, the type of weapon you are planning to house in the gun rack is of utmost importance. Now that we have determined where you want the gun rack to go, we can determine how to secure your gun(s). At this point we will also need to know if you need a single or dual gun rack.
There are a great deal of variations between weapon styles that we take into consideration when customizing the mounting brackets and gun lock portion of your gun rack. In order to secure the best fitment, we build the gun rack around your specific weapon and accessories.
At this point, you can choose they type of key access for your rack. We provide a gun lock for each weapon that has either a handcuff, vending, or standard key release (or none at all).
All gun racks come equipped with an 8 second timer and momentary switch that allow for quick, easy access to the weapon(s).
With the vast number of weapons in active duty, we sometimes require additional information and measurements about the weapon(s) being mounted in the gun rack. Our customer service team will work closely with you if necessary to identify specific measurements on your weapon to ensure that we get the best fitment for the weapon(s) into our gun racks The above diagrams point out some of the areas that we may request more specific measurements/information to help establish proper fitment.
Step 4:What weapon accessories will you be using on your weapon?The final step is to build around any accessories (if any) that you will be using on your weapon. Things like sights, lights, shields, and other accessories you place on the mounting rails. We also need to know about any removable accessories (such as lights, grips, and handles) that are on the weapon. The placement of these accessories can greatly effect the way we design the way that your weapon secures into the gun rack. As always, our customer service team will work with you as closely as necessary to ensure that we are able to get the right information to ensure the best fitment of your weapon into the gun rack.
Horizontal Mount shown in Chevy Impala
Pro-cell (vertical or horizontal) Mounts Trunk Mounts Wire Screen Mounts
These other popular mounting styles are also available
Handles/Grips
Scopes/Magnifiers
Lights
Trigger
Front Sight Stock
Carry Handle
stockrange
Pump
Flash Suppressor
Rails/Forearm
GripMagazine/Clip Trigger Stock
Rear Sight Rails
Side SaddleSide
Saddle
Rear Sight
Forearm
Side Saddle
Weapon Racks
21 22Self Supporting Mounts
Dual Gun Rack show from rearseat in a Charger
If you are going to carry weapons, easy access is always a top priority even when you don’t have a partition to mount the weapons to.
Pro-gard’s Self Supporting Gun Racks are ideal for supervisor, detective, and other such vehicles that are not utilizing partitions where a weapon rack can be mounted.
Designed to give maximum space for front passengers, your officers won’t have to worry about bumping their elbows into the weapons when moving around.
Strategically placed, their guns are easy to grab should the situation call for a quick access.
Durable, powder coated
steel construction
Choose from three different styles of gun lock keys
Custom fitting to your specific weapon helps to eliminate road rattle
Available for mounting dual or single weapons
“No Holes Drilled” installation utilizes existing OEM bolts and slots for an easy installation
For use in vehicles without partitions Rack lines up with seat edge for easy access that won’t
interfere with drivers range of motion
Fits comfortably behind aftermarket consoles
Momentary switch with 8 second delay timer on gun lock allows for quick access to weapons
with the simple touch of a button (see page 20 for more details on gun lock
options)
Don’t forget to purchase a Safestop Vehicle
Anti-theft System to protect weapon racks when officers must
step away from their vehicles (see pages 13-14 for more details about the Safestop
Vehicle Anti-theft System)
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
21 22
Dual Weapon Mount Pro-clamp shown in a Charger
Durable, powder coated steel construction
Choose from three different styles of gun lock keys
Custom fitting to your
specific weapon helps to eliminate road rattle
Available for mounting dual or single weapons
8 second delay timer on gun lock allows for quick
access to weapons with the simple touch of a button (see page
20 for more details on gun lock options)
Don’t forget to purchase a Safestop Vehicle Anti-theft System to protect weapon racks when officers must step
away from their vehicles (see pages 13-14 for more details about the Safestop Vehicle Anti-theft System)
Roof MountsDepartments who want to mount their weapons in a less conspicuous location will like Pro-gard’s out of the way,Pro-clamp, Roof-Mount Gun Racks.
These gun racks mount securely to the roof in a manner that they are barely visible from outside the vehicle. Weapons are safely out of the way when driving yet easy to reach when needed.
When coupled with our AOI Side Curtain Airbag On/off Control Switches, your fleet won’t have to worry about giving up their choice weapon mount.
If you are using a Pro-clam Roof-Mount Weapon Rack in a vehicle with side curtain
airbags, you’ll need to incorporate an AOI Side Curtain Airbag On/off Control Switch to safely
mount the rack in the airbag deployment zone (see pages 11-12 for more details about the AOI Airbag On/off
Control Switches)
“No Holes Drilled” installation, simply clamp
brackets around the edge of the upper door jams, lock tension bar, and
shut doors
Installs in minutes
For use in vehicles without partitions
Organization & Storage Products
Cargo Cabinets
MDO plywood structure combines the sturdy characteristics of plywood with the addition of resin outer layers that resist moisture
ABS overlaid exterior is easy to clean surface that won’t fade in sunlight
PVC bumpers contour to cabinet edges to protect corners from splitting
Large easy access storage bins are perfect for storing oversized gear and equipment
Gun racks are equipped with 8 second timers, monetary switches, and locks to secure your weapons
Choose from two standard designs that offer either a vertical or
horizontal mounted gun rack
Lonseal© liner is easy to clean and provides a tacky surface
Universal fit accommodates any SUV with a rear cavity that has a four foot clearance between the rear wheel wells
Overall dimensions for both units is 29”h x 48” w x 30”d and 225 lbs
23 24
Vertical Gun Rack, Cargo Cabinet show in Chevy Tahoe
Finding tactical and duty gear quickly can greatly impact the end result of many situations facing your officers on a daily basis.
Help them to stay organized and find what they need quickly with one of our Cargo Cabinets. Our cabinets are easy to clean and maintain and are the perfect way to haul duty gear securely.
We offer two standard designs both with dual gun racks, file drawers,
storage cubbies, and more. Made from the most durable materials, our cabinets are a strong sturdy addition to any SUV with a four foot clearance between the rear wheel wells.
Marine grade carpet can get wet and won’t absorb moisture, excellent for rainy days or humid weather
HDP composite panel doors are sturdy and
impact resistant
Horizontal Gun Rack, Cargo Cabinet
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
Trunk Trays &Trunk Organizers
Removable dividers allow you to customize storage slots
23 24
Trunk Tray and D3825L show in Crown Victoria
Trunk space is a premium to most officers especially when they are not able to store duty gear in the front of the car.
Pro-gard’s Trunk Trays and Trunk Organizers offer a wide variety of options for officers to store weapons, electronics, and other duty gear in an organized manner. Officers will be able to find what they need quickly without the hassle of sorting through gear and equipment.
Our trunk trays offer an out of the way platform to house aftermarket electronic equipment. Trays pull out easily to allow for maintenance while keeping wires and cords from becoming tangled with other trunk contents.
Trunk Organizers
Trunk Trays
D3805
D3825
Removable lid allows for storing oversized objects when necessary
Lightweight and durable ABS construction
D3825L also available that fits perfectly into the Crown Victoria spare wheel well
Easy slide out drawers keeps electronics out of the way while providing quick, easy access
Store electronic equipment, vaults, and safes for easy access
Located in upper half of trunk, allowing for plenty of storage space underneath
Durable steel construction
Organization & Storage Products
Duty Gear OrganizersKeep paperwork, handcuffs, flashlights, and other small duty gear within reach and easy to find with Pro-gard’s seat organizers.
Choose from three designs made from strong, durable materials that are meant to meet the strenuous demands of the job. Seat organizers can mount either on the front or back side of a passenger seat, file organizers can strap into a passenger or rear seat.
Their portable design makes them easy to move between car, desk, locker, and home making them the ideal organizer for pool cars.
Perfect for keeping
multiple smaller items (handcuffs,
mace, clipboards, forms, and more) secure
25 26
Multi Slot Organizer shown in Ford Crown Victoria
Portable PrinterD2951
Open SlotD3000
Multi-Slot D2950
SlottedFile D500
Adjustable dividers to fit your paperwork
Lightweight and durable ABS construction
Built in handle for easy carrying
Durable, 14 gauge steel construction
Portable design features adjustable straps that adapt to any seat
Accommodates portable printers up to 14” x 8½” x 5”
Secures to either passenger
or rear seat via the appropriate seat belt
Perfect for keeping duty gear plus a
portable printer secure
Mounts to any flat surface
20” x 14¾” x 10”
19¼” x 14¼” x 4¼”
19¼” x 14¼” x 3½”
Non-reflective finish prevents glare
Pro-gard Products, LLC • 800.480.6680 • www.pro-gard.com
Ballistic Ticket Boards
Choose from either left hand or right hand orientations to match individual officer dexterity
Every patrol officer needs a ticket board for daily tasks. Why not give them an increased sense of security? Equip them with a ballistic ticket board that serves as an added level of security against a surprise weapon assault in the course of their everyday duties.
Pro-gard’s Ballistic Ticket Boards are available in both NIJ Level I and NIJ Level II ratings. They are completely translucent so officers can see what is happening on the other side of the board should such a situation arise.
Designed with your officers in mind, they are available in left or right hand orientations.
Independently tested and certified to meet NIJ Standards
No spall and no penetration occurred during testing
Sturdy stainless steel clips won’t rust or easily snap off
Ergonomically positioned handle for a comfortable grip when writing
NIJ Level I ticket board is ¾” thick and weighs 3⅜ lbs
NIJ Level II ticket board is 1” thick and weighs 4½ lbs
Both horizontal and vertical license
cutouts to match ID orientation
25 26
Actual results from a shot, NIJ Level II Ballistic Ticket Board
Standard ticket board size of 9” x 11¾”
Ballistic Ticket Boards are available in either NIJ Level I or NIJ Level II ratings
Ticket boards are made of polycarbonate panels secured by an inner layer bond
NIJ Level I Ballistic TicketBoard, Left Hand Orientation
Lower clip is perfect for securing vehicle registrations while writing tickets
Upper clip is ideal for holding tickets steady while writing
7988 Centerpoint Drive, Suite 400 • Indianapolis, IN 46256p 800.480.6680 /317.579.6680 • f 317.579.6681www.pro-gard.com • [email protected]
Prisoner TransPorT ProducTs
• Prisoner Transport Partitions• Pro-cell Prisoner Transport Systems• Transport Seats & Floor Pans• Window Armor & Rear Door Panels• Cargo Barriers
exTerior ProTecTion ProducTs
• Standard Push Bumpers• Standard LED Push Bumpers• XPush Bumpers• Ballistic Door Panels• Skid Plates
WeaPon racks• Partition Mounts (vertical or horizontal)• Self Supporting Mounts• Roof Mounts• Pro-cell Mounts• Trunk Mounts
organizaTion & sTorage ProducTs• Cargo Cabinets• Trunk Trays• Duty Gear Seat Organizers• Duty Gear Trunk Organizers• Ballistic Ticket Boards
Fro elecTronic ProTecTion ProducTs
• Safestop Vehicle Anti-theft Systems• Front Passenger, AOI Airbag On/off Control
Switches• Side Curtain, AOI Airbag On/off Control
Switches