2008“Generating value through knowledge”“Generating value through knowledge”

Engineering and Industrial Development Centre

2008

R&D AND SPECIALIZED SERVICES ON COMPOSITE STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING

TECHNOLOGY

Composite material specimen preparation. Hand lay up with prepreg. Preparation in autoclave and hot plates compression press. (laminates of fiber reinforced composite materials with polymeric matrix, different fiber orientation).

Determination of mechanical properties; complete characterization considering the material anisotropy. Tension, compression, bending testing at temperatures -129 a 540°C.

Fatigue and fracture analysis of composite materials: High cycle fatigue, low cycle fatigue, fracture toughness, Poisson modulus, interlaminar shear, dynamic testing.

Nondestructive testing of composite materials, using ultrasonic with phase arrays, immersion ultrasonic, “C” scan, Lamb waves, acoustic emission, radiography, infrared thermography.

Failure analysis of composite materials using optical microscopy and scanning electron microscopy.

Noise and vibration analysis.

Autoclave, Econoclave 2×4, ASC Process Systems

Manual Hydraulic Compression Press, Q-230H,

PHI

Mechanical Testing System MTS-810

SEM

Instron 8872

ACTUAL CAPACITIES

2008

ASTM D 3529/D 3529M – 97 (Reapproved 2008) Standard test method for matrix solids content and matrix content of composite prepreg.

ASTM D 3530/D 3530M – 97 (Reapproved 2008) Standard test method for volatiles content of composite material prepreg.

ASTM D 3531 – 99 (Reapproved 2004) Standard test method for resin flow of carbon fiber-epoxy prepreg.

ASTM D 3532 – 99 (Reapproved 2004) Standard test method for gel time of carbon fiber-epoxy prepreg.

ACTUAL CAPACITIES

R&D AND SPECIALIZED SERVICES ON COMPOSITE STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY BODE 100 - PC Controlled

vector network analyzer

OMNISCAN MX PA, OLYMPUS

Ultrasonic immersion system

Hopkinson bar

Noise and vibration analysis

Infrared thermography

2008

MECHATRONICS FOR INDUSTRY. Turnkey automation solutions: Assembly & automated manipulation; Machinery for special testing

ASSEMBLY. Design and integration of solutions in: Automated transport & transfer systems; Handling & integration of robots; Positioning & indexing systems. Insertion, clamping, riveting & other assembly operations.

MACHINING. Machining Solutions: Automated drilling systems; Automated regrinding systems; Other machining operations.

TESTING. Design of special machines for inspection testing: Machines for inspection in industrial laboratories; Machines for automated testing; Machines for the inspection and operations of in-line testing; Optical machines.

AUTOMATION SIMULATION AND MACHINERY ANALYSIS. FEM & dynamic analysis; Production line simulations & human factors.

APPLIED ELECTRONICS. Integrated systems in industrial inspection for: Product quality checking, detection of defects; Barcode inspection in 1d

& 2d; Assembly verification; Inspection of dimensions.

ACTUAL CAPACITIES

R&D AND SPECIALIZED SERVICES ON METALLIC STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY

2008

ADVANCED MANUFACTURING

Product Design: Design and development of structural components for manufacturing processes and assembly with DELMIA-CATIA (Robotics simulations & work cells design)

Modeling and simulation

Plastic and other materials prototype manufacturing

Rapid prototyping by stereolitography

High speed and high precision machining

Die and tooling manufacturing

Manufacturing processes development

Optimization of operations sequence, production logistics and production diagnostic systems.

(Aluminum, Stainless Steel, Alloy Steels, Titanium, Engineering plastics)

ACTUAL CAPACITIES

R&D AND SPECIALIZED SERVICES ON METALLIC STRUCTURES DESIGN, OPTIMIZATION AND MANUFACTURING TECHNOLOGY

2008

NDT

NON DESTRUCTIVE INSPECTION (MM-063-006/08)

Radiography (RT) Testing

Ultrasonic Testing

Magnetic Particle Testing

Leak Testing

Eddy Current Testing

Visual testing

Fluorescent penetrant examination in aerospace components

ACTUAL CAPACITIES

Certified PersonnelASNT LEVEL III AND NAS 410

2008

Acredited on ISO-IEC-17025-2005

(NMX-EC-17025-IMNC-2006)

Metallography and Failure Analysis(MM-0031-006/08)

Chemical Analysis(Q-093-073/09 ema)

Mechanical Testing(MM-065-006/08)

OTHER METALLURGICAL SERVICES

ACTUAL CAPACITIES

2008

Management of metrological confirmation programs of measuring equipment.

Installation and set up at operation of calibration laboratories.

Specialized training in Metrology (Courses and Diplomas).

Specializes Consulting in measurement assurance with the MESURA program ® by CENAM and technological institutions.

Development of models and software for estimating uncertainties in measurement processes.

Development and manufacture of measurement equipment.

ACTUAL CAPACITIES

METROLOGY SERVICES

2008

METROLOGY SERVICES

Accreditation NMX-EC-17025-IMNC-2006

Certification NMX-CC-9001-IMNC-2000

Calibration and Measurements: Dimensional Qro. (D-39 ema), S.L.P. (D-102 ema), G.M. Silao (D-108 ema) Mass (M-31 ema) Density (DEN-06 ema) Volume (V-19 ema) Flow (FL-14 ema) Pressure (P-58 ema) Temperature (T-24 ema) Humidity (H-09 ema) Torsional torque, S.L.P. (PT-19 ema)

CANHEFERN

Electric (E-85 ema) Time & Frecuency (TF-14 ema)

MIDE Gas Flow (FL-016 ema)

ACTUAL CAPACITIES

2008

POTENTIAL CAPACITIES ON R&D AND SPECIALIZED SERVICES (no equipments available)

Flammability analysis

Permeability and water absorption analysis

Porosity analysis

Effect of humidity in composite materials

Electrical discharge reception in composite materials

Inspection by shearography

Environmental conditioning

High velocity impact testing

Other validation tests, according with special client requirements

POTENTIAL CAPACITIES

2008“Generating value through knowledge”“Generating value through knowledge”

PROJECTS OF INTEREST COORDINATOR

7.1.1. THE GREENING OF AIR TRANSPORT7.1.1.1. Green aircraftATT 2010.1.1-2 Aerostructures Dr. Carlos Rubio González

Dr. Ulises Sánchez Santana

7.1.3. ENSURING CUSTOMER SATISFACTION AND SAFETY7.1.3.3. Aircraft safetyATT 2010.3.3-1 Aerostructures Dr. Carlos Rubio González

Dr. Ulises Sánchez Santana

7.1.4. IMPROVING COST EFFICIENCY7.1.4.1. Aircraft development costATT 2010.4.1-1 Design Systems and Tools Dr. Hugo Gámez Cuatzin

Dr. Hugo Jiménez HernándezM.C. Antonio Ramírez Martínez

ATT 2010.4.1-2 Aerostructures Dr. Carlos Rubio GonzálezDr. Ulises Sánchez Santana

7.1.4.2. Aircraft operational costATT 2010.4.2-4 Systems Dr. Manuel Bandala Sánchez

Dr. Luis del Llano Vizcaya

7.1.6. PIONEERING THE AIR TRANSPORT OF THE FUTURE7.1.6.1. Breakthrough and emerging technologiesATT 2010.6.1-4 Life-cycle Dr. Luis García Valdovinos

Dr. Luis del Llano VizcayaM.C. Julio César Solano Vargas

7.1.6.2. Step changes in air transportationATT 2010.6.2-2 Guidance and control Dr. Luis García Valdovinos

Dr. Hugo Jiménez Hernández

IDENTIFIED COLLABORATION OPPORTUNITIES CoopAIR - CIDESI

2008“Generating value through knowledge”“Generating value through knowledge”

Tank you very much

Engineering and Industrial Development Centre