iCLASS®

INSTALLATION GUIDE

RK40

RWK400

RPK40

13.56 MHz Contactless Smart Card Readers with Keypad

6404-901 A.3

iCLASS RK40, RWK400, RPK406404-901 A.3

Parts List

PARTS• 1-iCLASSReader• 1-InstallationManual• 2-3 5mmx.6pitchx12mmPhillipsmachinescrews• 3-#6-32x.375”Phillipsself-tapping(mv)machinescrews• 2-#6x1.5”Phillipssheetmetalscrews• 1-#6x 375”Spannersecurityscrew,anti-tamper• 2-Terminalconnectorsforterminalreaders• 1-MountingGasket• 1-Baseplate

Recommended• Upto9wiresplices(pigtail)• Cable,5-9conductor(WiegandorRS232),22or24AWG[65mmor51mm](pigtail)

• LinearDCPowersupply• Metalorplasticjunctionbox• SecurityTool(foranti-tamperscrew)HID04-0001-03

6404-901 A.3 RK40, RWK400, RPK40 iCLASS

PRODUCT BASE PART NUMBER

INPUT VOLTAGE (VDC) CURRENTOPERATING TEMPERATURE CABLE LENGTH UL REF NUMBER

NSC PEAK

RK406130**/6138/6139/6132BxH/6132BxP

5-16VDC

75mA 120mA

-30 -150 F(-35 -65 C)

Wiegand = 500ft -22AWG(152.4m)300ft - 24AWG(91.44m)

RS232 = 50ft(15.24m)RS485 = 4000ft(1,219.2m)USB = 16ft(4.9m)UART = <1ft(0.3m)

RK40Cx1x2N

RWK400 6131** 104mA 153mA RWK400Cx1x3N

RPK40 6136**/6133/6134 *120mA 145mA RPK40Cx1x N

Junctionboxnotincluded.

Specifications

Mounting1

InadditiontoWiegandorClock-and-Data,RWreaderssupportRS232,RS485,USB,orUARTcommunications.

* Proxmodules-HIDProx:16mAless.

** ULlisted.

Note:Cablelengthover200feetmayrequirealargergaugewire.

NSC=NormalStandbyCondition

UL Reference Number Decipheringx1 ReaderColors: K=Black, G=Grayx2 Wiring: N=Pigtail, T=Terminalx3 RWReaderInterface:

T=RS232,U=USB,B=UARTtoUART,4=RS485x multiCLASSProximity: N=HID/AWIDProx,D=IndalaProx,X=Proxmodulenotinstalled

iCLASS RK40, RWK400, RPK406404-901 A.3

ATTENTIONObserveprecautionsforhandling

ELECTROSTATICSENSITIVEDEVICES

Wiring

Terminal ReaderPigtail (RP) Reader

BEEPER (YEL)HOLD (BLU)

TAMPER (V O)DATA1 (WHT)DATA0 (GRN)

GRN LED (ORN)RED LED (BRN)

+VDC (RED)GND (BLK)SHLD (DR)

2BEEPGRNRTN

+VDCSHLD

REDHOLD

GPI01GPI02OC/TMPRDATA1DATA0GPI03GPI04

18in(0.46m)

* Drainwirecanbe“datareturn”linewhenaseparatepowersupplyisused.** ExcludingmultiCLASS(RPReaders),requiresExpansionModule[RS232,RS485,USB,UARTtoUART].

GPIOsignifiesaGeneralPurposeInput/Output.*** TamperOutput.Whenactivated,outputsyncstoground(default).**** Dependentuponreaderconfiguration.

SeeHTOGWiegandandClock-and-Dataconfigurationsformoreinformation.

Pigtail Terminal Description Pigtail Terminal Description

Yellow P1-1 BeeperInput P2-7 ** GPIO1(RS232-T/RS485-A/HADP-OSDP-A/USB-5V/UART-T)

Orange P1-2 Green(GRN)LEDInput P2-6 ** GPIO2(RS232-R/RS485-B/HADP-OSDP-B/USB-D+/UART-R)

Black P1-3 Ground(RTN) Violet P2-5 *** OpenCollectorOutput

Red P1-4 +VDC White P2-4 **** WiegandData1/Clock

Drain P1-5 *Shield(SHLD) Green P2-3 **** WiegandData0/Data

Brown P1-6 RedLEDInput P2-2 ** GPIO3(RS485-Z/USB-D-)

Blue P1-7 HoldInput P2-1 ** GPIO4(RS485-Y)

6404-901 A.3 RK40, RWK400, RPK40 iCLASS

Power & Testing

Turnpoweron

Testcard

4

Install Reader to Backplate3

iCLASS RK40, RWK400, RPK406404-901 A.3

BEEPGRNRTN

+VDCSHLD

REDHOLD

GPI01GPI02OC/TMPRDATA1DATA0GPI03GPI04

CAUTION: Once installed, do not remove expansion modules.

Expansion Module Installation

BEEPGRNRTN

+VDCSHLD

REDHOLD

GPI01GPI02OC/TMPRDATA1DATA0GPI03GPI04

ExpansionModule

part #

3122anb - uart3122ane - rs2323123ane - rs4853123anm - hadp/osdp3124ane - usb3126ane - hid prox

3127ane - indala prox

3128ANE -em prox

3170ane - hi-o

ExpansionModulesconnecttoterminalreaders,installwhenpowerisoff.OnlymultiCLASSpigtailreadersprovideproxexpansionmodulecapabilities.RS232,RS485,andUARTexpansionmodulesarenotcompatiblewithmultiCLASS(RPreaders).

6404-901 A.3 RK40, RWK400, RPK40 iCLASS

Optional Features

• ExpansionModulesprovideoptionalfunctionalityforallterminalreaders.3122ANB-UARTtoUART,3122ANE-RS232,3123ANE-RS485(Full),3123ANH-RS485(Half),3123ANM - hadp/osdp,3124ANE-USB,3126ANE-HIDProx,3127ANE-IndalaProx,3128ANE-EMProx,3170ANE - hi-o

• OpenCollectorOutput-Controlsanexternaldevice(16VDCMax)operatinginHostModeonly.Sink-40mA/Source-1mA.SeetheiCLASSApplicationNotefordetails.• OpticalTamper-AconfigurationcardisnecessarytoactivatetheOpticalTamper.Onceactivated,andwhenthemountingplateisremoved,theOpticalTamperisactivated.ContactH DTechnical

SupportforOpticalTamperoptions.SeeTamperApplicationNote,AN0112.• ConfigurationCards-Withtheuseofconfigurationcards,thereadercanbemodifiedtomeetthespecificrequirementsofaninstallation.Configurationoptionsinclude;audiovisual,CSNoutputsand

keypadoutputs.ContactHIDTechnicalSupportforallreaderconfigurationoptions.

• HoldInput-whenasserted,thislineeitherbuffersacardordisablesacardreaduntilreleased,asconfigured.