Upload
jodi-jones
View
21
Download
0
Tags:
Embed Size (px)
DESCRIPTION
dsc keypad programming guide
Citation preview
www.dsc.com
THANK YOUPK/RFK55XX Keypad Zone, PGM or Low Temp Sensor
www.dsc.com
Wiring a keypad with a Zone input
www.dsc.com
Wiring a keypad with a Zone input
Keybus to
the panel
www.dsc.com
Wiring a keypad with a Zone input
www.dsc.com
Wiring a keypad with a Zone input
www.dsc.com
ProgrammingSection [000] Sub-Section [0]
Assign an unique Slot # to the keypad.
Section [001- 004]
Define the zone.
Section [202 – 265]
Verify the zone is active.
Section [020]
Program the keypad slot with the zone number.
www.dsc.com
Wiring a keypad with a PGM output
Keybus to
the panel
www.dsc.com
RM-1
Wiring a keypad with a PGM output
+
-
www.dsc.com
RM-1
+
Wiring a keypad with a PGM output
-
N/O
C
N/C
www.dsc.com
ProgrammingSection [009 - 011]
Define the PGM.
Enter into Keypad Programming (*)
Section [077]
Toggle Option 3 ON.
Section [080]
Select the PGM # to follow.
www.dsc.com
Programming the Keypad as a Low Temp Sensor
Keybus to
the panel
www.dsc.com
Programming the Keypad as a Low Temp Sensor
No additional
wiring needed
Alarm – 43o
Reset – 48o
www.dsc.com
ProgrammingSection [000] Sub-Section [0]
Assign an unique Slot # to the keypad.
Section [001- 004]
Define the zone.
Section [202 – 265]
Verify the zone is assigned to a partition.
Section [020]
Program the keypad slot with the zone number.
www.dsc.com
ProgrammingEnter into Keypad Programming (*)
Section [077]
Toggle Option 3 ON.
Toggle Option 8 ON.
Low Temp Sensor is built into the keypad – no wiring required.
Alarm – 43o
Reset – 48o