025-2011-en-CeMAT Preview Exhibitorslogistiek.nl.s3-eu-central-1.amazonaws.com/app/... · At CeMAT, the world’s largest trade fair for intralogistics (May 2–6, Hanover), Meisenheim-based

No. 025/2011 – EN

1 / 35

Deutsche Messe AG Messegelände • 30521 Hannover • Tel. +49 511 89-0 • Fax +49 511 89-36694 www.messe.de

Press Release

08. April 2009

16 February 2011

CeMAT 2011 (2 – 6 May):

CeMAT Preview 2011: the exhibitors

– in alphabetical order

Hall 27, Booth C47

Company: Axxom Software AG

Speaker: Jens Verstaen, Manager Marketing & Public

Relations

Highlight: ORion-PI® Staff Planning & Scheduling – Integrated,

intelligent material flow and staff planning for

optimum scheduling of staff in logistics and

distribution centers

Information:

Axxom Software AG presents their ORion-PI® Staff Planning & Scheduling

solution at CeMAT for the first time. The software makes efficient staff

scheduling in logistics and distribution centers possible and is the first,

and until now only, solution on the market to combine material flow and

staff planning.

To achieve this, ORion-PI® Staff Planning & Scheduling relies on a virtual

warehouse model for determining the expected workload and the

scheduling of the employees. In this model for example, shelving and

container types and dimensions are defined and paths, aisles and

No. 025/2011 – EN

2 / 35


conveyor technology established. With the help of intelligent system

support, similar to custom warehouse logic or drag and drop operation,

even large logistics centers with several thousand storage areas can be

depicted within a relatively quick timeframe. The special feature of the

Axxom warehouse model is that the components, such as the individual

shelving units, as well as the processes performed there, are stored with

time components, such as Refa or MTM schedules.

Using these time components, ORion-PI® calculates the required time for

all of the individual processes on the basis of the existing and expected

orders from the warehouse management or ERP systems, in order to

process these orders in the warehouse. The total of the individual process

steps forms the total processing time required. By dividing the total time

into individual steps, when and where in the warehouse which workload

will be required is determined precisely and visually. The necessary

employee hours are then compared against the employees that are

actually available. In this manner, ORion-PI® discovers overlapping

capacity and staff shortages and determines efficient staff scheduling

plans.

The results from practical experience prove that the need for temporary

staff can be reduced by up to 50 percent through the usage of ORion-PI®

Staff Planning & Scheduling and flex-time accounts can be reduced by 15

percent. Thereby, significant cost reduction can be achieved, while

sustaining or increasing the level of service and improving employee

satisfaction.

Press Contact:

Jens Verstaen

Tel.: +49 (0)89 568 23 321

E-mail: [email protected]

No. 025/2011 – EN

3 / 35


Hall 27, Booth H32

Company: BEUMER Group GmbH & Co. KG

Speaker: Regina Schnathmann, Director communications and

public relations

Highlight: BEUMER stretch hood i

Information:

At the CeMAT, the world's leading trade fair for intralogistics the BEUMER

Group will exhibit jointly together with its group companies Crisplant a/s

and KOCH Holding a.s - for the very first time. In the last two years, the

intralogistics supplier headquartered in Beckum made two significant

acquisitions: Crisplant a/s, a worldwide leader in sortation and

distribution technology with headquarters in Denmark and the Czech

company KOCH Holding, which specializes in pipe conveying technology.

This year, the BEUMER Group will showcase the entire product portfolio of

all group members in Hall 27 at stand H32.

The BEUMER Group's trade fair presence will be focused on innovative and

sustainable solutions for the following fields of expertise: conveying and

loading technology, palletising and packaging technology, and sortation

and distribution systems. In the field of sortation and distribution

technology, the Group will exhibit a BEUMER sorter loop type used in

numerous distribution centres. The BEUMER Sorter BS 7/25/55 BT

consists of a series of conveyor belts and, compared with other cross-belt

sorters, utilizes 50 % fewer components. The energy consumption of this

high-speed sorter is up to 75% lower compared to conventional

technology, which allows for improved CO2 balance.

At the CeMAT, BEUMER will also demonstrate the energy-efficient Tilt Tray

Sorter LS-4000 developed by Crisplant, which uses the linear synchronous

motor (LSM) technology.

The sector of conveying and loading technology will be duly represented

by a KOCH pipe conveyor. This machine may be used to transport various

bulk materials over large distances and tackles off-road terrain with ease.

No. 025/2011 – EN

4 / 35


The newly developed BEUMER stretch hood®i, the next generation of the

established packaging system series BEUMER stretch hood®, will represent

BEUMER's latest achievements in pallet packaging technology. The stretch

hood® i offers superior load stability, reduced energy and film

consumption and has a smaller footprint, creating a more efficient work

routine.

Press Contact:

Regina Schnathmann

Tel.: + 49 (0) 2521 24381


Hall 13, Booth A16

Company: BITO-Lagertechnik Bittmann GmbH

Speaker: Silvia Feder, Leitung Marketing und Werbung

Highlight: heavy-duty plastic containers

Information:

At CeMAT, the world’s largest trade fair for intralogistics (May 2–6,

Hanover), Meisenheim-based Bito-Lagertechnik Bittmann GmbH will

present a wide range of new products. Among them is a new series of

heavy-duty plastic containers. Measuring 800 x 600 mm and able to carry

loads of up to 500 kg, these containers open up totally new possibilities for

logistics in the areas of production, storage and transport. They are sturdy

and versatile, but much lighter than skeleton boxes or steel containers.

This makes them ideal for lean production. In addition, they can be stacked

safely, with a permissible dynamic load of 1,000 kg and a static load of up

to 1,500 kg.

The storage specialist will also present the PROmotion system, an

enhanced version of its PRO pallet storage system. PROmotion features a

No. 025/2011 – EN

5 / 35


battery-driven, remote-controlled shuttle for handling and conveying

pallets in pallet racking. The shuttle moves independently in its lane on

special guide tracks, without being connected to another carrier vehicle. It

organizes loading and unloading operations, ensures continuous unloading

and assumes inventory functions.

Geared to specific market needs

Bito’s development division has also upgraded the “heart” of the mobile

racking system, its control and safety system. Up to now a standard

programmable logic controller (PLC) was used. Now the system has been

thoroughly adapted to the specific needs of the market, given a general

overhaul and brought up to the state of the art. Bito will present the

advantages of this new technology at CeMAT.

At CeMAT Bito will also present new standardized brake rollers for SDS

dynamic carton flow lanes. These ensure that all containers, whether

empty or filled to the maximum, travel in a lane at the same slope. The

slope of the lanes is set for the light container. The brake rollers provide

optimum braking for containers of differing weights, ensuring that they

travel safely and require no extra equipment (hooks).

Press Contact:

Silvia Feder

Tel.: 06753/122-217


Hall 25, Booth D12

Company: CARGOTEC

Speaker: Thomas Malmberg, Oliver Kah, Ralf Gowin

Information:

Cargotec improves the efficiency of cargo flows on land and at sea –

wherever cargo is on the move. We create solutions that improve the

cost efficiency as well as environmental and health & safety

No. 025/2011 – EN

6 / 35


effectiveness of our customers’ operations. Cargotec’s daughter brands,

Hiab, Kalmar and MacGregor are recognized leaders in cargo and load

handling solutions around the world. Cargotec’s global network is

positioned close to customers and offers extensive services that ensure

the continuous, reliable and sustainable performance of equipment. We

are committed to responsible operating practices, international safety

standards and well-being at work. Cargotec’s sales totalled EUR 2.6

billion in 2010 and it employs approximately 10,000 people. Cargotec’s

Class B shares are quoted on the NASDAQ OMX

Helsinki.www.cargotec.com

Services

Cargotec’s solutions are supported by a variety of services ranging from

warranty work, basic inspections and spare parts to on-call service,

refurbishment work, maintenance contracts and other customer-specific

services. With our extensive service network, we serve our customers

around the globe in their own language and based on the same quality

promise.

CeMAT2011

The first time Cargotec will present the daughter brands Kalmar and

Hiab under the roof of Cargotec.

“We keep cargo on the move” is the main message for Cargotec to

present their actual products and novelties. The CeMAT in Hannover is

the perfect platform, for setting new local and international trends. The

latest developments in logistics will be shown in concentrated form.

Press Contact:

Bettina Kuppert

Tel.: +49 (0) 511 77 05 123,


No. 025/2011 – EN

7 / 35


Hall 25, Booth J 11

Company: Continental Reifen Deutschland GmbH,

Rubber Group, BU Industriereifen

Speaker: Ute Weiß

Highlight: ContiRT20 and ContiRV20

Information:

The ContiRT20 Performance, a pneumatic radial tyre, can be relied on to

move extremely heavy loads at speeds of up to 40 km/h (25 mph). The

new tyre manages to achieve up to 30% greater life expectancy. The tyre

also fulfills greater demands in terms of even wear and suspension

characteristics, without making compromises in stationary stability or

protection against stone trapping.

Developers took into account the heavy stress to which such a product is

subjected later when used in the wood, steel or cement industry, in

shipyards, logistics centres, or in air- and seaports in both indoor and

outdoor applications. The tread depth, for example, was increased to the

maximum to ensure the longest possible service life. The tread pattern

design, featuring wide grooves, guarantees reliable traction at all times

on both surfaced and unsurfaced ground. Rolling resistance was

substantially reduced to ensure low energy consumption, without

adversely affecting driving comfort. The ContiRT20 has high performance

reserves, which make it a very reliable tyre.

The ContiRV20 is a powerful all-rounder for typical airport applications.

This radial pneumatic tire, which is also suitable for use in production

plants, plant engineering and construction as well as in logistics centres,

has three major advantages: Up to 50% longer service life compared with

a crossply pneumatic tire, a maximum authorised speed of 50 km/h,

ideal for transport needs and a greater fuel efficiency and handling.The

reason for these advantages is the specific mix of compounds, the

balanced tread depth, and the ribbed design.

The mix of materials is specifically tailored by Continental to provide

extra efficiency. “It facilitates less rolling resistance, which is 30 percent

No. 025/2011 – EN

8 / 35


less than with a cross-ply tire the same size,” explains Ralf Krieger,

Product Development Manager, Industrial Pneumatic Tires at

Continental. “For each metre travelled, fuel costs are saved and thus CO2

emissions reduced.”

A tough reinforced sidewall completes the components of this balanced

tire whether being used on a tug, tractors or fork lift trucks at airports,

the radial pneumatic ContiRV20 tire moves large loads quickly and

reliably thus protecting the driver and goods to be transported with

maximum comfort.

Press Contact:

Ute Weiss

Tel: +49 (0) 511/ 938-2131


Hall 13, Booth E 11

Company: Paul Craemer GmbH

Speaker: Sandra Kübler

Highlight: Craemer TC1, ECOmax

Information:

Craemer at the CeMAT 2011

Well equipped for 2011 through investments in product innovation

With about 600 employees at its four European sites in Germany,

Slovakia, Great Britain and France, the Craemer Group is one of the

world’s leading producers of high quality reusable plastic pallets. With

over 40 years’ know-how in pallets and 50 years’ experience in injection

moulding, Craemer now offers unique expertise in the area of

development and manufacturing. The service offer ranges from the

development and manufacturing of load carriers to the realisation of

No. 025/2011 – EN

9 / 35


complex logistic solutions based on RFID technology for pallet

management.

At this year’s CeMAT, Craemer – hall 13, stand E11 – will present

innovative solutions and the latest products in pallet logistics:

• The new Craemer TC1 – the TOP solution among closed plastic

pallets in the European size 1,200 x 800mm;

• The eco-friendly ECOmax is the first half-size plastic pallet and

stands for sustainability and value creation. The “new one from

Duesseldorf” offers higher functionality and durability than the

half-size wood pallet and can be used universally;

• Europe’s best-selling RFID pallet – impresses with its possibilities

for efficient load carrier management and an optimised flow of

goods;

Craemer was the first pallet manufacturer to introduce RFID-tagged

plastic pallets in Germany in 2004, and is thus one of the pioneers in the

pallet industry who quickly understood how valuable the use of these

transponders was for clients.

• Special size load carriers – are manufactured according to

invidual customer requirements and thus guarantee maximum

flexibility;

Palpool –rounding off the product portfolio is Palpool - a web-based

solution for renting pallets cost-effectively on the basis of the latest RFID

technology with a 0% rate of pallet loss. With the Palpool service,

Craemer has created a unique pallet pooling system, allowing 100%

transparency with regards to costs and stocks.

We cordially invite you to visit us at the CeMAT in hall 13 / stand E11.

Press Contact

Sandra Kübler

Tel.: +49 (0)5245 43 – 235


No. 025/2011 – EN

10 / 35


Hall 025, Booth F11

Company: Coil Secure Systems

Speaker: Dietmar Kupferschläger, Prof. Dr. Axel Jäger

Highlight: Coil Carrier

Information:

The charge should be sent to the customer safe, quick and efficient. By

using the CSS COIL CARRIER you will reduce the charging time, provide

more security during the handling procedure and use your cargo area to

full capacity.

Just as well it is important that your coils arrive at your client without any

damages. With the CSS COIL CARRIER all these problems will be solved.

The CSS COIL CARRIER can be customized to every round or oval material

for every purpose –whether for light stackable material (CSS COIL CARRIER

lightweight construction) or even for very heavy-weighted materials. His

combinability and possibility of form closure warrants an optimal axle

load and cargo load distribution.

We have patented the CSS COIL CARRIER to range from a writing utensil

to the extent of trailer measures.

As a logistic overall system solution it is now possible to handle round

material continuously in the same transport device, the CSS COIL CARRIER,

via different routes of transport. The CSS COIL CARRIER can be used for

every way of transport: by truck, by train or by ship and thereby reduces

your expenses apparently.

The CSS COIL CARRIER simplifies all workflows at the customer. The

continuous concept of simple stacking in the CSS COIL CARRIER, the

optimized protection against accidents and the reduced set-up times

provide more confidence of your customers. The CSS COIL CARRIER cares

here again time saving and cost reduction.

No. 025/2011 – EN

11 / 35


CSS COIL CARRIER helps you to enhance the environment. The CSS COIL

CARRIER makes a lot of recurrent work processes unnecessary – to vary

from assembling fitting pallets for transport, via repeated rotating of the

coil during the reloading and for the manufacturing to the point of the

storage of stock remainders.

All these savings pollute the environment evidently less than all well-

known past methods of transport and stocking.

Press Contact:

Dietmar Kupferschläger

Tel.: +49 6381 998 990


Hall 27, Booth E31

Company: Forbo Siegling GmbH

Speaker: Matthias Eilert, Sascha Falkenberg

Highlight: Amp Miser™ conveyor belts

Information:

Amp Miser™ conveyor belts are eco and climate friendly, promising up to

40% energy savings when conveying unit goods and fewer CO2

emissions.

A sliding layer on the belt’s underside decreases friction, permanently

cutting energy consumption as a result. Renowned conveyor operators

tested the belts thoroughly in real-world conditions. Almost all the

results indicated between 25 and 40 percent in energy savings, for

example:

- Distribution centre at T.N.T., Kingsbury (UK)

Horizontal conveyors, approx. 16 m long for parcels, energy

saving: 39.8%

- Düsseldorf Airport

No. 025/2011 – EN

12 / 35


Collecting belt behind the check-in, approx. 45 m long, energy saving:

32.4%

Airports in Amsterdam, Denver, Dallas, Copenhagen, Madrid,

Manchester, Sydney and the Siemens Airport Center in Fürth reported

massive savings too. Parcel and goods distribution centres in Aarhus, as

well as Hamburg, Bremen and Oldenburg equally made huge savings.

Forbo Siegling currently has four, European-manufactured Amp Miser™

belts in its range. Two of them are flame retardant to comply with airport

specifications.

The energy/cost saving can be calculated with a free tool online at:

www.ampmiser.com

Forbo Siegling employs more than 1,800 people globally in eight

production sites and 25 international companies. Forbo Siegling belts

made of synthetic materials are used in nearly all industries, but also in

the retail and services industries. Key competencies are the food and

packaging industries, logistics and airports, as well as paper, print and

raw materials industries. Siegling was founded in 1919 in Hanover,

Germany. Since 1994 Siegling has belonged to the Swiss company Forbo

International. The products have been marketed since 2007 under the

master brand "Forbo Movement Systems".

Press Contact:

Matthias Eilert

Tel.: +49 (0)511 67 04 232


No. 025/2011 – EN

13 / 35


Hall 27, Booth G19

Company: EffizienzCluster Management GmbH

Speaker: Thorsten Hülsmann, CEO

Carina Neveling, Marketing and Communications

Dr. Udo Riedesel, Projectmanagement

Info: Logistic faces some major challenges. These include the conservation of the environment and the careful handling of resources. At the same time, supply in urban systems must be secured as individualisation increases and the flow of goods must be maintained. Efficiency is therefore the most important thing. In February of 2010, the EffizienzCluster LogistikRuhr won the Leading-Edge Cluster competition of the Federal Ministry of Education and Research to work on those future challenges. To develope the location's leading global position in the field of logistics, the EffizienzCluster LogistikRuhr aims to establish itself as a worldwide centre for innovative design of high-quality logistics services. The key issues in the cluster include adaptable logistics systems, goods traffic management and logistical organisation expertise. More than 130 partners are working together on 30 projects, which are based on a support of 40 million Euro and which form the so far most extensive research project in Logistics.

After a period of five years, the projects will have results in more than 100 new products and innovations as well as 4 000 new jobs. Consequently, one aims at tapping a market potential of more than two billion Euro until 2015.

The answers to the major social and economic challenges can be found only by science and industry together. Due to this, the partners of the EffizienzCluster LogistikRuhr do have both backgrounds. There are 120 companies and 11 research institutes working together.

Besides research institutes like the Fraunhofer Institute for Material Flow and Logistics IML, the Fraunhofer Institute for Software and Systems Engineering ISST, the TU Dortmund and the Centre for Logistics and Traffic at the University of Duisburg-Essen, around 60 small and medium-sized companies belong to the EffizienzCluster LogistikRuhr. Strong partners are e.g. Deutsche Post AG, Deutsche Bahn AG, ThyssenKrupp AG or Accenture Deutschland GmbH.

No. 025/2011 – EN

14 / 35


EffizienzCluster Management GmbH (Mülheim/Ruhr) is the agency of the cluster and working in the fields of communications and marketing, project coordination and the support in form of content.

Press Contact:

Carina Neveling

Tel.: +49 231 9743 607


Hall 27, Booth G19

Company: Fraunhofer Institute for Material Flow and Logistics IML

Speaker: Tim Geißen, Daniel Schlottbohm

Highlight: Fashion Logistics

Information:

Due to the increasing demands of the fashion sector regarding logistics,

the Fraunhofer IML decided to set an industry focus on fashion logistics.

The - to this end established - competence team fashion logistics aims to

conceive interdisciplinary and sector-specific solutions that effectively

increase the whole value creation chain from production to distribution.

Finally, a very successful project with the international lifestyle brand for

men ROY ROBSON has been realized.

Press Contact:

Dipl.-Logist. Daniel Schlottbohm

Tel.: +49 (0)231/ 9743 - 289


The Team warehouse logistics is specialized in the purposeful consulting

of WMS users of all industries and enterprise sizes concerning the

selection and introduction of WMS. As a part of “Fraunhofer IML”, the

Team warehouse logistics looks back on more than 10 years of

interdisciplinary technical and methodical competences. By means of the

No. 025/2011 – EN

15 / 35


world’s largest WMS Database the team offers a functional comparison

of more than 95 systems, thus, allowing a purposeful selection of

qualified software providers.

Press Contact:

Dipl.-Logist. Tim Geißen

Tel.: +49 (0)231/ 9743 - 227


Hall 27, Booth G19

Company: Fraunhofer Institutes for Material Flow and Logistics IML

and for Software and Systems Engineering ISST

Speaker: Andreas Nettsträter

Highlight: Logistics Mall – Cloud Computing for Logistics

Information: To make IT support for logistics processes more flexible for medium-sized

companies, the Fraunhofer Institutes for Material Flow and Logistics IML

and for Software and Systems Engineering ISST, both of Dortmund, in

conjunction with the TU Dortmund University, have been investigating

the topic of “Cloud Computing for Logistics” since 2009.

The work of the Fraunhofer Innovation Cluster on the Logistics Mall also

feeds into the “EffizienzCluster LogistikRuhr,” which on January 26,

2010, under the direction of the Fraunhofer IML, won the German

federal government’s excellence cluster competition.

Logistics Mall is a virtual marketplace where logistics software “as a

service” can be offered. The software is made available through the

Logistics Mall. Once a use agreement has been concluded, the customer

can use a browser to access its own private area of the Logistics Mall and

apply the software. Billing is usage-based and issued through the

operator of the Logistics Mall.

No. 025/2011 – EN

16 / 35


Press Contact:

Dipl. Oec. Maren Meinhardt

Tel.: +49 (0)231/ 9743 - 290


Hall 26, Booth L16

Company: Fronius International GmbH

Ansprechpartner: Boris Ringwald, Salesmarketing

Benjamin Hackl, Productmarketing

Highlight: Battery charging systems with Active Inverter

Technology

Information:

Active Inverter Technology –

Battery Charging Technology that Pays

The main focus of the fair will be the newly developed Active Inverter

Technology, which Fronius launched a few years ago.

The words on everyone's lips at present with regard to battery charging

systems for electrically-powered forklift trucks are 50-Hz transformer

technology and high-frequency technology (HF technology). 50 Hertz

transformer technology is robust, reliable and inexpensive. High-

frequency technology is synonymous with longer battery service life and

higher energy efficiency, but is more error-prone and not as robust due

to the more sensitive technology it employs.

The Active Inverter Technology developed by Fronius combines the best

of each technology: the advantages of the long-lived and robust 50 Hertz

transformer technology and the efficiency and cost effectiveness of high-

frequency technology.

The subject of cost effectiveness addresses the ongoing operating costs

associated with the charging of traction batteries.

Energy efficiency and sustainability are currently hot topics in

intralogistics and are suggested in the tagline for this year's CeMAT -

"Sustainability in Intralogistics". The subject will therefore be well to the

fore on the Fronius stand.

No. 025/2011 – EN

17 / 35


Fronius is presenting some features under the heading of flexibility that

will warm the hearts of forklift service specialists and technicians in the

workshop: two of the standard products, Selectiva Plus 8070 and 4050,

will be demonstrated in a wide variety of applications.

Fronius will be providing updates and demonstrating the progress that

has been made on its energy cell. In addition to the World Energy Globe,

Fronius has now been awarded the VDI Innovation Prize for Logistics for

its "HyLog" project ("Hydrogen powered Logistic System"), a completely

emission-free and efficient logistics operation within a real industrial

environment - in this case the Fronius facility in Sattledt.

As part of its expansion across Europe, Fronius is looking for more

potential sales partners, particularly battery dealers in the northern,

southern and eastern European economic areas.

Press Contact:

Boris Ringwald

Tel. +43 (0)7242- 241-6436


Hall 025, Booth C19

Company: J. Führ GmbH

Speaker: Alexander Führ, Managing Director; Thimo Hopp, sales

Highlight: LED-Lights

Information:

The J. Führ GmbH offers first class solutions for forklift trucks, cranes,

construction and agricultural machinery. The company based in

Hamburg is the specialist when it comes to work and driving lamps,

rotating and strobe beacons and acoustic devices like back up alarms and

horns. Especially in the area of LED technology the company evolved in

recent years the market leadership and now consistently offers LED

No. 025/2011 – EN

18 / 35


variants for each type of headlights, work lights, taillights or warning

lights.

With 32 years of experience not only in the segment for forklift trucks

the company has built a unique market position and successfully

combines the manufacturer (OEM) business with the aftermarket. The J.

Führ GmbH supplies all major German producers of forklift trucks and

has become the preferred provider of assembly ready components.

As system partner and german represent of international manufacturers

the J. Führ GmbH supplies manufacturers of forklift trucks, construction,

agriculture and cleaning machines in the OEM business. In the

aftermarket sector the J. Führ GmbH serves the accessories and spare

parts market and applies only to resellers.

Here, the extensive product portfolio includes both the products of

represented companies and a wide range of electrical spare parts and

accessories for forklift trucks, cranes and trucks – from work lights,

headlights, strobe lights, rotating beacons, displays, ignition switches,

horns etc. to special products and individual solutions.

The company was founded in 1972 and is family-run in the second

generation.

Press Contact:

Alexander Führ

Tel.: +49 (0)40 303300-10


Hall 27, Booth D46/1

Company: IdentPro GmbH

Speaker: Michael Wack, Managing Partner

Paul Drolshagen, Marketing Manager

Highlight: identPLUS system for precise localization of fork trucks and goods

No. 025/2011 – EN

19 / 35


Information:

A daily chock in efficient production and warehouse logistics is the lack of

transparency and goods/containers that are not be found in the location

stated by the IT system. IdentPro has extended its innovative fork truck

and goods localization tool identPLUS with two new modules:

1. As of now trucks, goods and containers can additionally be located

outdoor with a precision of up to 40 cm.

2. The new module IDEAL allows for identification of cargo without

use of RFID or barcode labels.

For the new outdoor localization IdentPro uses DGPS and an own sensor

for generating precise position data. The position is continuously

calculated directly on the vehicle which makes area-wide availability of

Wi-Fi obsolete. The system automatically switches between indoor and

outdoor localization.

In order to identify goods or containers on the fork truck they needed to

be labeled with RFID or barcode and the truck to be equipped with

respective reader devices. The new module IDEAL allows for automated

identification of cargo that has no labeling at all. The cargo is only once

introduced to the system and then all movements are precisely tracked.

This allows tracking of goods that cannot easily be labeled or where

labeling is economically not reasonable (e.g. pallets). The location of

goods like industrial paper reels or steel coils is now always available with

the new IDEAL module even in chaotic warehouses. Any transportation

order can be automatically controlled. Transparency is rising and the

digital blueprint of the warehouse situation is always correctly matching

reality.

Press Contact:

Paul Drolshagen

Tel.: +49 2241 / 866 392 28


No. 025/2011 – EN

20 / 35


Open Air Site, Pavillon P33

Company: J. Jungheinrich AG

Speaker: Markus Piazza , Jan Kaulfuhs-Berger

Information:

Jungheinrich AG Corporate Profile

Jungheinrich with its headquarters in Hamburg, ranks among the world’s

leading companies in the material handling equipment, warehousing

and material flow engineering sectors. The company, founded in 1953 is

a service provider with manufacturing operations as well as an

intralogistics solution provider, which offers its customers a

comprehensive range of forklift trucks, shelving systems, services and

consulting.

The direct sales network of Jungheinrich in Germany is made up of a

total of 17 sales centers and branch offices. The company is also

represented with its own sales and service companies in 30 other

countries worldwide. In Europe alone Jungheinrich has roughly 100

business locations from Norway to Turkey, and from Finland to Portugal.

In many other countries such as Australia, South Africa and India

Jungheinrich co-operates with a network of dealers.

Jungheinrich maintains a closely-meshed customer service network and

the company’s own highly-qualified, service technicians make certain

that Jungheinrich stackers ensure a high level of availability. A night-time

supply of spare parts is secured via three central spare parts depots, so

that the supply of parts to service vehicles is ensured even at night –

starting out from Norderstedt to Northern Europe, from Lahr in the south

of Baden to Southern Europe and from Bratislava (Slovakia) to Middle

and East Europe. A further central spare parts depot in Shanghai serves

the Asian market.

Jungheinrich has expanded its logistics systems business considerably

over the past few years. In so doing, the company has focussed on tailor-

made solutions, running the gamut from manual storage installations

No. 025/2011 – EN

21 / 35


featuring warehouse management systems and radio communications

to fully automated warehousing systems with shelf operating devices

and conveyor technology and combinations of the two. Jungheinrich

stands by its customers from the first consulting session through

planning, project engineering and system integration to services once

the solutions are up and running.

Press Contact:

Jan Kaulfuhs-Berger

Tel.: +49 (0)40 6948-1503


Hall 13, Booth B40

Company: J. kardex remstar

Speaker: Manfred Schleicher, Tobias Laxa

Highlight: Shuttle XP-Serie, Megamat RS, Power Pick Global

Information:

Kardex Remstar

Kardex Remstar is a leading provider of automated retrieval systems for

storage and picking in the warehouse, manufacturing and office

environment. Kardex Remstar is part of the Swiss company, Kardex AG,

with approx. 2,200 staff in more than 30 countries. More than 165,000

Kardex group storage solutions are currently in use at well-known users

in all sectors all over the world. These include Audi, Bosch, Continental,

Daimler, Fiege, Hilti, Kuka, Liebherr, Lufthansa, Qiagen, Roche, Siemens,

Volkswagen and many others.

Shuttle XP Series

Shuttle XP series automated vertical lifts offer maximum flexibility and

high density storage. The OptiFlex technology automatically records the

dimensions of the goods and determines the optimum storage space for

each storage cycle. The almost continuous grid minimises the distances

between the stored trays; the modular design also means that all the

shuttle systems can be easily expanded and reorganised for future needs.

No. 025/2011 – EN

22 / 35


Megamat RS

The new vertical, automated storage carousel, Megamat RS, is ideal for

storing goods with high access frequency. The Megamat RS is used both

as a stand-alone storage element and in combination with several

systems. The system also features innovative safety systems to protect

goods and people, and an integrated environmental management

system.

Global Power Pick

The Global Power Pick warehouse management software facilitates time

and route-optimised picking in dynamic storage systems. The system is

not only suitable for all the retrieval systems from Kardex, but can also

be used to control and manage automated storage systems from other

manufacturers. All the common interfaces, and picking technologies are

already integrated.

Press Contact:

Tobias Laxa

Tel.: 08283-999 286


Hall 27, Booth D24

Company: KNAPP AG

Speaker: Gerald Hofer, CE Customer Relations

Frank Kraus, Sales KNAPP Deutschland GmbH

Highlight: OSR ShuttleTM solutions with Pick-it-Easy workstations

Information:

All-in-Shuttle at CeMAT 2011

• System solutions with focus on OSR ShuttleTM technology

• KNAPP presents new Pick-it-Easy workstation

• Fashion logistics and food/retail solutions expanded

No. 025/2011 – EN

23 / 35


• Brand new: free moving open shuttles

Because of the rising costs of energy and raw materials, and against the

backdrop of the current climate debates, the topic of sustainability is a

particular challenge in the intralogistics sector. KNAPP also pays a great

deal of attention to ergonomic analysis and applies the findings to the

design of the product. From this work KiDesign was developed, an

intelligent design for goods-to-person solutions, fashioned according to

the principles of ergonomics, ergo-dynamics and multi-functionality. In

the OSR ShuttleTM, the customer has a warehouse system especially

distinguished by its energy efficiency. The power requirements are less

than ten percent of the energy consumed by a conventional automated

small parts warehouse.

All-in-Shuttle

Because of the variety of technologies and the design freedom of the OSR

Shuttles™, KNAPP offers systems that are tailor-made to fit the

customer’s requirements. All the main processes, especially storage,

consolidation, sequencing, buffering, picking and handling of returns can

be realized with the OSR Shuttle™.

Premier for Pick-it-Easy

Three different workstations, special solutions for garments in the

fashion sector, and food and retail applications will be presented. The

Pick-it-Easy workstation product family considers a multitude of

ergonomic aspects, with absolutely no loss in performance.

Open shuttles instead of conveyors

In Hanover, KNAPP will be exhibiting the free moving shuttles for the

first time. With further innovation, these open shuttles will have a

lasting influence on the logistics sector. Without rails, the open shuttle

can exit the storage aisles to directly supply the work stations. A

warehouse without a conveyor system is therefore possible, which makes

future solutions highly flexible.

Press Contact:

Margit Wögerer

Tel.: +43 316 495 2501


No. 025/2011 – EN

24 / 35


Hall 27, Booth D18

Company: PSI Logistics GmbH

Speaker: Wolfgang Albrecht, Managing Director

Highlight: Smart Grid for Logistics

Information:

PSI presents innovative logistics solutions at CeMAT

Smart Logistics Grid - the intelligent interconnection of existing logistics

systems.

Berlin, 16th February 2011 - With new modules and functionality PSI

Logistics GmbH will present itself at CeMAT 2011 from 2nd to 6th of May

in Hanover (hall 27, booth D 18) with the slogan “Smart Grid for

Logistics”. The conflict with new thought models for logistics as well as

lecture forums on the trend issues of intralogistics complete the

offerings of this trade fair appearance.

With the Warehouse Management System PSIwms and the planning and

control software PSIglobal, two central software systems for logistical

processes will be presented to the specialist audience for the first time in

Release 2.0. With numerous new functions, the transportation

management system PSItms will also be shown. Result: Further improved

integration capabilities, optimum resource management, and extensive

flexibility in customisation to the individual requirements of the user. All

new system functions and modules will be demonstrated on-site in

impressive live demonstrations by the PSI Logistics experts.

In addition, at CeMAT, the premium software developer raised its profile

as a mastermind for the sector. Even the motto of the trade fair

appearance “Smart Grid for Logistics” refers to a new innovative

approach for PSI Logistics, which will shape further product development

as well as intralogistics in the future: Smart Logistics Grid - the intelligent

interconnection of existing logistics systems.

No. 025/2011 – EN

25 / 35


Last but not least, PSI Logistics will organise several lecture forums each

day focussing on the trend issues of intralogistics and logistics IT. The

individual sequences deal with sample practical applications as well as

new thought approaches for logistics. They are held both mornings and

afternoons on the trade stand for PSI.

PSI AG develops and integrates complete solutions for energy

management (electricity, gas, oil, heating, water) based on their own

software, provides cross-company production management (metals,

automotive, machine and installation construction, raw materials

production, logistics), as well as infrastructure management for

transport and security. PSI was founded in 1969 and has 1,400

employees. www.psi.de

The following contact persons of PSI Logistics are available for an

individual conversation at the press preview:

Press Contact:

Wolfgang Albrecht

Tel. : +49 40 696958-15


Hall 27, Booth E43

Company: RO-BER Industrieroboter GmbH

Speaker: Elmar Stöve, Manager Sales / Project Planning

RO-BER Industrieroboter GmbH, founded in Berlin in 1983, has

established itself as a prominent manufacturer of gantry robots for

automation in material flow and goods distribution and material

handling tasks in the field of logistics in almost all industrial branches.

The core expertise of the company lies in the development and

construction of gantry robot systems. High-performance gantry robots

(area and linear gantry robots) in combination with components of

No. 025/2011 – EN

26 / 35


product transport and handling technology offer a wide range of

solutions for complex tasks in the fields of palletising, depalletising,

order picking as well as material transfer, buffering, storing and (de-

)stacking.

Robust construction and state-of-the-art modular design, which allow for

cost-effective adaptation to specific customer requirements, guarantee

adjustment of the gantry robots of the series GENIX and GIGANT with

100 kg, 300 kg and 1,000 kg payload to almost any task.

By use of reliable gripping systems and individually adjusted, customer-

oriented software as well as intelligent control technology high

performance potential and process stability can be achieved.

High service dependability and safety as well as user-friendliness are

guaranteed by integration of error documentation and remote control

systems and integration of imaging systems. Tailor-made transport

systems and special transport components are delivered by a subsidiary

company which guarantees a flexible reaction to customer requirements.

High quality demands and a well organized service concept, including

special training courses, maintenance and repair through to a 24h/7days

hotline service aim at long-standing partnerships with our customers.

Extensive project know-how and experience with more than 1,000 robot

installations make RO-BER a competent partner for automation.

Press Contact:

Tel.: +49-2307-94103-0


No. 025/2011 – EN

27 / 35


Hall 12, Booth D40

Company: STAHL CraneSystems GmbH

Speaker: Thomas Kraus, Heike Metzger

Information:

STAHL CraneSystems – Partner of Experts

High-quality crane technology from Künzelsau

As one of the leading suppliers of high-quality crane technology, STAHL

CraneSystems offers the world's widest range of lifting technology and

crane components. The company employs around 650 staff, 500 of

them in Germany. The experience from over 130 years of crane

manufacturing and the expertise from decades of fundamental research

coalesce at our headquarters in Künzelsau. The great production depth in

our German plant accounts for the outstanding quality of our products

and our great flexibility.

Customised solutions and explosion-protected hoists

STAHL CraneSystems occupies an exceptional position in the field of off-

standard hoists: on the basis of our modular hoist series our powerful

engineering team develops matured solutions far beyond the standard

market.

The greatest challenge are explosion-protected hoists. Here we have

been the undisputed world market leader for many years. Since 2010 all

explosion-protected hoists have also been available with the

internationally sought-after IECEx certification in addition to the strict

ATEX regulations.

Partner of Experts

As technology specialist, STAHL CraneSystems regards itself as a partner

of crane manufacturers, clearly expressed by our new claim: "Partner of

Experts". Apart from our wide-ranging training courses, we assist crane

manufacturers with direct contact to our sales team, our professional

factory service department and advice from our engineering department

who gladly assist them on difficult projects. Selected crane

No. 025/2011 – EN

28 / 35


manufacturers are granted the "Partner of STAHL CraneSystems"

certificate, a coveted seal of approval in the industry.

Our hands-on stand at the CeMAT

Look, experience, have a go – on our spacious new stand we offer hands-

on experience of leading edge technology. All the products can be

extensively operated and tested. Visually, the new stand is orientated on

our new brand design which we will present for the first time at the

CeMAT. We look forward to your visit in Hall 12, stand D40!

Press Contact:

Heike Metzger

Tel.: +49 7940 128-2388


Freigelände, Pavillon P35

Company: STILL GmbH

Speaker: Jürgen Wrusch, Internationale

Unternehmensskommunikation

Highlight: STILL RX 70 HYBRID

Information:

STILL presents the first ready for series and deliverable diesel forklift

truck RX 70 HYBRID worldwide.

The new RX 70 HYBRID series has a load capacity of 3.0 and 3.5 tonnes.

They feature the lowest energy consumption in their class – another

contribution by STILL to sustainable intralogistics, because a low energy

consumption means less CO2 emission.

For this the RX 70 HYBRID makes use of “free” energy recuperated from

the kinetic energy of the truck when braking.

This energy is stored and accelerates the truck again together with the

diesel engine in the following work cycle.

No. 025/2011 – EN

29 / 35


Additional benefits: The RX 70 HYBRID works more silently and can do

with a smaller engine. Instead of 44 KW the new RX 70 HYBRID only

needs a 36 KW diesel engine to achieve the same turnover. For this,

driving and lift movements are intelligently controlled – supported by an

electrically adjustable displacement pump.

Altogether the RX 70 HYBRID is another module for higher efficiency and

more eco-friendliness.

Visit us at the CeMAT in the pavilion P35 on the trade show.

Press Contact:

Jürgen Wrusch

Tel.: +49 40/7339-1508


Hall 027, Booth D29

Company: Swisslog AG

Speaker: Dr. Volker Jungbluth, Magaging Director

Highlight: Swisslog presents new SmartCarrier storage and

transport system

Information:

Swisslog brought the new SmartCarrier transport robot to market right

on time for LogiMAT. The technology is predominantly designed for

highly dynamic light goods warehouses. Swisslog as turn-key supplier for

intralogistics solutions now possesses the largest light goods technology

portfolio of the industry. With immediate effect, Swisslog will distribute

AutoStore worldwide. Thanks to successful collaboration in Germany,

Austria, Switzerland and the USA, Swisslog has now secured the rights

for the worldwide distribution of AutoStore. AutoStore is a complete

system for storage and order picking of small parts primarily for mail

order businesses. An important advantage of AutoStore is the ease of

realization in new as well as existing buildings. Due to its flexibility, the

available space is always used in an optimum way. This automated

No. 025/2011 – EN

30 / 35


system for storage and order picking of single items and small cases

complements Swisslog’s portfolio ideally. Besides the new SmartCarrier

and AutoStore, Swisslog also offers the QuickMove conveyor system and

the Tornado stacker crane.

In addition, Swisslog continues to set new standards in energy efficiency.

With GreenLog, a new standard for all products and solutions is

introduced that minimizes the energy consumption of systems and sub-

systems. When Swisslog develops new solutions and products, special

attention is paid to low energy consumption of the systems and

subsystems involved. Swisslog has now introduced the "GreenLog"

energy label which forms a new standard for energy efficiency. It stands

for consistent weight optimization and use of energy-efficient drives,

amongst other things.

SmartCarrier is not the only product carrying the GreenLog label; all

solutions and products in the Swisslog portfolio are classified according

to the new standard. GreenLog ensures that the energy consumption of

the respective technology has been optimally reduced. Beyond the

energy consumption of the individual systems and subsystems the entire

distribution center is taken into account.

Standard GreenLog-certified modules and products will from now on be

used for the design of new systems and facilities. Moreover, existing

systems can be retrofitted with energy-efficient components to meet

Swisslog’s GreenLog standard.

Press Contact:

Monica Caruso

Tel.: +41 62 837 41 41


No. 025/2011 – EN

31 / 35


Hall 26, Booth L02

Company: Toyota Material Handling Deutschland

Speaker: Matthias Fischer, Managing Director

Highlight: Details will follow after the middle of March!

Information:

CeMAT Preview: In line with the overall CeMAT 2011 theme

“Sustainability in Intralogistics,” the Toyota Material Handling exhibition

will focus on several key areas, including “Responsible Innovation”,

“Safety” and “Empowering your Business”. One highlight of our

“Empowering your Business” focus area will be Toyota I_Site, which

provides a unique combination of technology, information, expertise and

support to help businesses manage their materials handling operations

more effectively. At CeMAT, Toyota Material Handling Europe will also

launch or preview a number of new products and demonstrate how our

complete offer of products, services and solutions help drive down costs

for customers. More details will be provided in a CeMAT preview press

release in March. We look forward to meeting the international press at

CeMAT!

About Toyota Material Handling Europe (TMHE): TMHE helps businesses

of all sizes across Europe meet today’s materials handling challenges

with a full range of Toyota counterbalanced forklift trucks, BT warehouse

equipment, and services and added value solutions, including service

contracts, short term rental, used trucks and the Toyota I_Site

information service. Active in more than 30 countries across Europe and

with headquarters in Sweden, TMHE has a European Office in Brussels

and production centres in Ancenis (France), Bologna (Italy) and Mjölby

(Sweden).

With about 4,000 service engineers, around 7,500 employees, along with

a network of independent distributors and dealers, TMHE is the European

regional organisation of Toyota Material Handling Group (TMHG), which

is part of Toyota Industries Corporation (TICO) – the global leader in

No. 025/2011 – EN

32 / 35


materials handling equipment. For more information on TMHE, visit

www.toyota-forklifts.eu.

Press Contact:

Volker Sandmann

Tel.: +49 511 7262-247


Hall 27, Booth G24

Company: viastore systems

Speaker: Dr. Matthias Schweizer

Highlight: high-performance storage and retrieval machine

Information:

Focus on high performance and sustainability:

viastore at CeMAT with many innovations

viastore systems is a provider of integrated warehouse and distribution

systems, warehouse management software, material flow systems,

storage and retrieval machines and SAP logistics solutions. At CeMAT

2011, viastore presents sustainable systems that help companies design

their warehouse and distribution center operations to be more efficient,

energy-saving and ergonomic. viastore shows an automated mini-load

system (MLS), a new high-performance storage and retrieval machine

(SRM), a new load-handling device (LHD) and upstream fully automated

pick stations.

The design engineers of the new high-performance SRM viaspeed

focused their attention on providing a machine with a wide dynamic

range and high energy efficiency. The lightweight construction can

optionally be equipped with energy equalization or energy refeed. In

addition, the SRM automatically switches into a stand-by mode when it

has been motionless over a defined period. viastore has also developed a

No. 025/2011 – EN

33 / 35


new LHD for their MLS machines. The new system allows for flexible

multiple-deep storage of totes and cartons of different sizes.

The advanced version of the fully automated picking system viapick will

also be live in action at CeMAT. viapick is specially designed for average-

and slow-moving products. The autonomously working system reaches

into the storage container just like a picker and can put a variety of

products into the order container in a defined way, or can place them, in

order, directly into the shipping carton. viastore will also present a new

high-performance pick station which allows the picker to achieve the

highest possible amount of picks per hour continuously, depending on

the part and order structure.

viastore introduces a new release of their WMS viad@t and innovations

from its SAP Logistics Solutions division. The viastore experts will also

demonstrate step by step how a warehouse may be modernized without

interrupting production.

viastore systems GmbH

viastore systems GmbH has been among the leading international

system providers of turnkey automated intralogistics systems, of

warehouse management systems, material flow and process controls,

and of storage and retrieval machines, for about 40 years. In 2010,

approximately 350 employees generated a turnover of about 75 million

Euros. The independent division viastore SAP Logistics Solutions is

specialized, as a consultant, service provider and vendor of SAP-based

intralogistics solutions, in technologies and add-ons for warehouse

logistics.

Press Contact:

Dr. Matthias Schweizer

Tel.: +49 711 9818-142


No. 025/2011 – EN

34 / 35


Hall 26, Booth G09

Company: ZF Passau GmbH

Speaker: Cornelia Sonnleitner, Marketing &

Communications

Highlight: ZF cPOWER – continuously variable transmissions

Information:

For the first time, ZF will be presenting a continuously variable

transmission for construction machinery and diesel forklifts - ZF cPOWER

- at the CeMAT Hannover in May 2011. (fig. 2)

Because of rising fuel prices and a raising awareness of CO2-emissions

the market asks for more efficient drive systems. New emission

guidelines (USA-EPA and EU directives) implicate technological

restrictions and constraints with diesel engines that would be hardly

achievable in the future.

High loads at low speeds in combination with high dynamic are the

outstanding requirements for off-road machinery. These criteria are met

optimally by the new ZF CVT transmission technology in an up to now

unthinkable degree of efficiency.

A trend towards lower engine speeds and the demand for engine

stabilization by a constant speed concept are the future challenges on

the off-road machinery market. The continuously variable cPOWER from

ZF meets both requirements.

In wheel loader applications, hydrostatic-powersplit transmissions

ensure significant consumption benefits compared to hydrodynamic

transmissions and purely hydrostatic concepts.

The continuously variable transmissions clearly demonstrate their

benefits in all ranges of the typical wheel loader operating cycle, i.e.

during bucket filling, transporting and loading.

No. 025/2011 – EN

35 / 35


In this process the percentage of hydrostatic power is kept low whereby

an optimal degree of efficiency can be achieved.

Already in the start-up process the bigger part of output comes from the

mechanical part of the transmission and even in very short loading cycles

the utility of the CVT technology becomes noticeable in reduced fuel

consumption.

The application of an elaborate hydraulic transmission-control unit and

transmission integrated on-board electronic optimally completes driving

functions in reference to sensitivity and driving comfort and realizes an

aligned power management.

Press Contact:

Cornelia Sonnleitner

Tel.: +49 851 494-2556


Your contact for further information at Deutsche Messe:

Brigitte Mahnken

Tel.: +49 511 89-31024


Further press releases and digital photos can be downloaded at:

www.cemat.de/pressservice

Documents

025-2011-en-CeMAT Preview Exhibitorslogistiek.nl.s3-eu-central-1.amazonaws.com/app/... · At CeMAT, the world’s largest trade fair for intralogistics (May 2–6, Hanover), Meisenheim-based