[ Owners-Manual ] MODEL 7756Vpdf.ampire.de/viper/7756V_bedienung_englisch.pdf · • The Control button, for placing the system into Valet Mode* and to perform the Emergency Override**

[ Owners-Manual ] M O D E L

7 7 5 6 V

3© May 2015 ampire Electronics - All rights reserved

Inhalt

Getting Started ..............................................................8 • Charging the remote control ........................................... 8 • Keystousingthismanual ................................................. 9

Responder LC Remote Control ...................................10

Control Center .............................................................11

Status Screen Icons .....................................................12

Using your System ......................................................15 • Commands and Confirmations ....................................... 15 • PerformingCommands ................................................... 15 • ResponderLCCommandtable ................................. 16 / 17 • FaultConditionAlerts ..................................................... 17

Basic Commands (Direct Access) ................................18 • Arm .................................................................................. 18

• ToArmandPanic ............................................................ 18 • Disarm .............................................................................. 18 • AUX/Trunk ....................................................................... 19 • RemoteStart(only5606V) ............................................. 19

Advanced Commands: (Level 1) .................................20 • SilentArm ........................................................................20• SilentDisarm ...................................................................20

• AUX1 ...............................................................................20• RuntimeReset(only5606V) ...........................................20

CA

R S

EC

UR

ITY

ICARAUDIOICARMEDIA

54 © May 2015 ampire Electronics - All rights reserved © May 2015 ampire Electronics - All rights reserved

• TempRequest .................................................................. 21

Advanced Commands: (Level 2) .................................22 • SensorBypass .................................................................. 22 • RemoteValet ................................................................... 22 • AUX2 ............................................................................... 22 • TimerStart(only5606V) ................................................. 23 • RuntimeRemaining(only5606V) .................................. 23

Advanced Commands: (Level 3) .................................24 • SensorSilentArm ............................................................ 24 • Carfinder ......................................................................... 24 • AUX3 ............................................................................... 24 • SmartStart(only5606V) ................................................. 24

• AlarmReport ................................................................... 25

Advanced Commands: (Level 4) .................................26 • FullSilentArm ................................................................. 26 • AUX4 ............................................................................... 26 • Defogger(only5606V) ................................................... 26

Responder LC Configuration ......................................27 • Navigatingmenusandoptions ...................................... 27 • Buttonoperation ............................................................ 27 • Accessmenuitems .......................................................... 28

Main Menu ...................................................................29 • SetupRemotemenu ....................................................... 29 • SensorAdjust ................................................................... 32 • PairRemote ..................................................................... 33 • Demomode ..................................................................... 34

• PowerOff ........................................................................ 35 • Exit ................................................................................... 35

1-way Companion Remote Control ......................36 / 37 • Usingthe1waycompanionremote .............................. 37

• AccessingCommands ...................................................... 37 • ButtonAutoLock ............................................................ 38 • CarSelect ......................................................................... 38 • Programming .................................................................. 38

Alarm Features ............................................................41 • NormalArmProtection .................................................. 41 • SensorSilentArmprotection ......................................... 42 • FullSilentArmProtection .............................................. 42 • SensorWarn-awayMessages ......................................... 42 • FullTriggerMessages ...................................................... 42 • EmergencyOverride ....................................................... 42 • TriggerZoneFaultReport .............................................. 43 • AlarmReportwhendisarming ....................................... 44

• TableofZones ................................................................. 44 • AlarmReportwhenrequested ....................................... 45 • NuisancePrevention(NPC) ............................................. 45

Remote Start Features (only 5606V) ..........................46 • KeyTakeover ................................................................... 46 • RemoteStartSafe-lock ................................................... 46 • DisablingRemoteStart ................................................... 46 • AdvancedStart ................................................................ 47 • TemperatureReporting .................................................. 49

• RemoteStartTime-outAlert .......................................... 49 • PitStopMode .................................................................. 49


• ManualTransmissionStart(MTSmode) ........................50• TurboTimerMode .......................................................... 51 • RemoteStartError .......................................................... 52

Remote and System Operations .................................54 • PassiveArming ................................................................ 54 • AutoRe-arming ............................................................... 54 • OnetimeBypass ............................................................... 54 • ValetMode ...................................................................... 55 • PowerSave ...................................................................... 55 • RapidResume .................................................................. 56 • AutomaticRemoteUpdates ........................................... 56 • OutofRange ................................................................... 56 • NoRemoteOutput ......................................................... 56 • FeaturenotAvailable ..................................................... 57 • ResetnachTiefentladung ............................................... 57

System Expansion Options .........................................58 • Controllingtwovehicles(CarSelect) ............................. 58 • Ownerrecognition .......................................................... 58 • Comfortclosure ............................................................... 58 • Alarmoutputduration ................................................... 58 • ArmingandWarn-awaychirpcontrol ........................... 59 • Driverdoorpriorityunlocking ....................................... 59 • AuxiliaryChannels .......................................................... 59

Battery Information (Responder LC) .........................60 • LowBattery .....................................................................60 • BatteryLife ...................................................................... 61

Battery Information (1-Way) ......................................62 • BatteryReplacement ...................................................... 62 • BatteryDisposal .............................................................. 62

Glossary of Terms ........................................................63


Note!

Ifthebatteryisexcessivelydepletedwhencharging,func-tionalitymaybedelayedwhileitchargestotheminimumvoltagerequiredtooperatethedisplay,afterwhichnor-mal charging resumes.

Keys to using this manual Specificactions(inboldtype)andstyleconventionsareusedconsistentlythroughoutthismanual,theyareasfollows:

• Press:impliespushinginandreleasingabutton.

• Hold:isusedafterPressactionswhenabuttonneedstobeheld in position for an extendedperiodof time, typicallyseveralseconds.

• „ARMED“: this styledenotes the textwhichappears in thetextfieldportionoftheDisplayduringoperationsdescribedinthemanual.Ifthetextstringistoolongforthetextfield,itthenplaysandloopssequentiallywordbyword.

• Italicizedwordsdenote section/subheadings in thisguideandcanbelocatedthroughthetableofcontents.

• Anasterisk (*)whenusedafterawordorphrasedenotesthatadditionaldetailscanbefoundinrelatedsectionsusu-allynotedatthebottomofthepageorendofthesection.

Getting Started

Your Responder LC remote is powered by an internal rechargeablebatterythatcanonlybeservicedbyanautho-rizedDirecteddealer.Duetotransitandstoragetimepriortoyourpurchase,thebatterychargemayhavedepleted.Toensureproperoperation,checkthebatterylevelandifnotfullycharged,usetheprovidedcabletoconnecttotheUSBportona computer. See“Battery Information (ResponderLC)”onpage49and“Status Screen Icons”onpage8 formoreinformationaboutthebattery.

Charging the remote control

• PlugtheUSBendoftheprovidedUSBcable intotheUSBportonacomputer.Insertthemini-USBconnectorintothemini-USBportlocatedonthesideoftheremotecontrol.Thetextfieldwilldisplay„CHARGE“ to indicate the remote con-trol is charging (The remote remains operational whilechargingandcancommandthesystem).

• Oncefullychargedthetextfieldwilldisplay„FULL“.

• The remote control is then ready for use. Disconnect thecablefromtheremotecontrolendfirst.


Responder LC Remote Control

Feature Description

InternalAntenna Usedfortransmittingandreceivinginformation

Display

Status screen-theupperportionofthedisplaycontainsstatusiconsfortheSystem,Siren,Alarmzones,RemoteStartandRemoteControl.Text field -thelowerportionofdisplay-showstheClock,RuntimeorTemperatureduringRe-moteStart,aswellasCommandconfirmations,Pagemessagesandprogrammingmenus

Command buttons(4) Usedtoperformarming,disarming,auxiliary

channel and remote start commands

Functionbutton Usedtoaccessfunctionlevelsforcommands,configurationmenusforprogramming,CarSelection,andtorequestreports.

Mini-USBPortTheUSBcableplugsintothisport(locatedonremotecontrolside).

Control Center

TheControlCenter, typically locatedontheupperpartofthefrontwindshieldsendsandreceivescommandsormes-sagestoandfromyoursystem.

Itconsistsof:

• TheIn-vehiclesystemantenna,for2waycommunication.

• TheStatusLED,asavisualindicatorofthesystem’sstatus.

• TheControlbutton,forplacingthesystemintoValetMode*andtoperformtheEmergencyOverride**operation.

* See“RemoteandSystemOperations”onpage54fordetails.** See“AlarmFeatures”onpage41fordetails.


Symbol Beschreibung

RemoteStart(5606V)

Remotestartisactive,theengineisrunning.

TimerStartOn;RemoteStartOn.Withoutarrow:TimerStartenabled:RemoteStartOff

SmartStartOn;RemoteStartOn.Withoutarrow:SmartStartOn;RemoteStartOff.

ManualTransmissionStartmodeisenabled,theenginecanbestarted

Displaysthevehicleinteriortemperature

OnduringRemoteStartafterperform-ingtheDefoggerOncommand

ZoneStatus

OnduringWarn-awayandFullTriggermessageoutput

OnduringTrunkZoneFullTriggerout-putandAux/Trunkchannelactivation

OnduringFaultReporttoindicatetheTrunkisopenandbypassedwhenarming

OnduringaSensorZoneFullTriggeroutput

OnduringFaultReporttoindicateaSen-sorisactiveandbypassedwhenarming

OnduringtheDoorZoneFullTriggeroutput

OnduringFaultReporttoindicateaDoorisopenandbypassedwhenarming

OnduringaHoodZoneFullTriggeroutput

OnduringFaultReporttoindicatetheHoodisopenandbypassedwhenarming

Status Screen Icons

ALL

Thetablebelowdescribesallthestatusscreenicons.

Symbol Beschreibung

SystemStatus

Armed:ThesystemisArmed,thealarmisenabled.

Locked:ThesystemisLockedinValet,thealarmisdisabled.

Disarmed:ThesystemisDisarmed,thealarmisdisabled.

Unlocked:ThesystemisUnlockedinValet,thealarmisdisabled.

SirenStatus

Sirenisdisabledforsensortriggers;remoteispagedforalltriggers(SensorSilentArm).

Sirenisdisabledforalltriggers;remoteispagedforalltriggers(FullSilentArm).


Symbol Beschreibung

RemoteControl Status

On when remote is set to command the systemprogrammedasCar1*

On when remote is set to command the systemprogrammedasCar2*

BarsindicatebatterylevelisFull,¾,½,¼orEmpty

On while the remote control is transmit-ting a command

Onwhiletheremotecontrolisreceivinga message

OnwithOutofRangefaulttonetoindicatetheremotefailedtoreceiveacommand confirmation

Pageron:Theremotewillwakeuptolisten for messages

Pageroff:Theremotewillnotwakeupto listen for messages

TheremotewillVibratewhenmessagesarereceived

TheremotewillemitBeepsandToneswhenmessagesarereceived

DisplaystheClock,Runtime,Tempera-ture,messagetextandfeaturemenus

OnaftertheGarageOpen**messagehasbeenreceived.

OnaftertheGarageClosed**messagehasbeenreceived.

Using your System

Commands and Confirmations Commands,BasicorAdvanced,areusedtoactivatesystemfea-turesandareperformedbypressingoneoftheCommandbut-tons.Basiccommandscontrolthemostoftenusedsecurityandremote start featureswhileAdvanced commands controlmorespecializedfeaturesandrequestreports.ConfirmationsforBasicorAdvancedcommandsareindicatedfirstbysirenchirpsandparkinglightflashes,andthenbyText,Iconsandbeepsortonesonthere-motecontrol.AdescriptionofeachfeatureconfirmationisfoundinthefollowingBasiccommandandAdvancedcommandsections.

Performing Commands PerformBasiccommandsbypressingoneofthecommandbuttonswhileintheDirectAccesslevel.Directaccessisavail-ablewhilethetextfielddisplaystheClock,TemperatureorRuntime. Perform Advanced commands by first accessingone of the Function Levels and then pressing one of thecommandbuttonswhilewithinalevel.FunctionLevelsareavailablewhenthetextfielddisplaysLEVEL1,2,3or4.

Advanced command example: Silent Arm• Press the -button once to access Function Level 1, thetextfieldwilldisplay„LEVEL 1“.

• Pressthe -buttonwhile„LEVEL 1“textisstillontoperformtheSilentArmcommand.

• TheResponderLCremotewilldisplay„SILENTARMED“inthetextfieldandupdatethestatusscreenicons.

* ThisiconnotpresentuntiltheCar2isturnedonintheSetupRemoteconfiguration menu. ** Thisiconnotpresentuntiltheremoteispairedwithanoptionalgaragedooropener


Responder LC Command table

Button Direct Access x1 LEVEL 1 x2 LEVEL 2 x3 LEVEL 3 x4 LEVEL 4

Arm/Lock(Panic) SilentArm SensorBypass SensorSilentArm FullSilentArm

Disarm/Unlock SilentDisarm RemoteValet CarFinder

RemoteStart RuntimeReset TimerStart SmartStart Defogger

Aux/Trunk AUX1 AUX2 AUX3 AUX4

AdvanceLevelChangeCar(3s),Enterprogramming(8s)

TemperatureCheck RuntimeRemaining AlarmReport

Fault Condition Alerts If,whenperformingacommand,aconditionexiststhatdoesnotallowactivationofanAlarmfeature*orRemoteStartfea-ture**,the„NOT AVAILABLE“ or „REMOTE START ERROR“textandafaulttonewillplay.

* Alarmfeaturenotavailablewhenthesystemstatusisincorrectuponreceivingthe command.(Example:Sensorbypasscommandisreceivedwhendisarmed).Referto thenotesincludedinthefollowingcommanddescriptionsthataddressthesefaults orgoto“FeaturenotAvailable”onpage57formoredetails. ** RemoteStart(only5606V)featurenotavailablewhentheRemoteStartstatusisin correctuponreceivingthecommand. (Example:Runtimeresetcommandreceived whenremotestartisoff).Refertothenotesincludedinthecommanddescriptions that address. Thesefaultsorgoto“RemoteStartError”onpage52formoredetails.


AUX/Trunk – Press and hold TheTrunkopens(ifconnected)whenthisbuttonispressedfor2seconds.The„TRUNK“textandtonesplaytoconfirm.

Remote Start (only 5606V) – Press and release Activates(orifOn,deactivates)theremotestarter.Theen-gineandparking lights turnOnand the„REMOTE START ON“textandtonesplay,ortheengineandparkinglightsturn Off and the „REMOTE START OFF“textandtonesplaytoconfirm,theRemoteStartstatusiconsupdate.

The iconwill display in the status screenand the textfieldwilldisplaytheRuntime,TemperatureorClockaspro-grammed.IfRemoteStartfailstoactivate,„REMOTE START ERROR“textandafaulttoneplaywhiletheparkinglightsflashtoidentifythereason.***

Basic Commands (Direct Access)

Arm – Press and release The alarm arms, doors lock (if connected), and the sirenchirpsandparkinglightsflashonce.The„ARMED“textandbeepsplaytoconfirmandtheSystemStatusIconsupdate.IfValetmode*isOn,thedoorslockandthe „VALET“textandtoneplay.ExitValetmodetoarmthealarmnormally.

IfatriggerzonefaultisdetectedthesirenchirpsonceagainandtheTriggerZoneFaultreport**plays.

To Arm and Panic – Press and hold The alarm Arms (or Locks in Valet) and, after 2 seconds,soundsthesirenandflashestheparkinglights.The„PANIC“ textandsirentonesplaytoconfirm.Pressthe or but-tontostoptheoutput.

Disarm – Press and release The alarm disarms, doors unlock (if connected), and the siren chirps andparking lights flash twice. The „DISARM“ textandbeepsplaytoconfirmandthesystemstatusiconsupdate. If Valet mode* is On, the doors unlock and the „VALET“textandtoneplay.

Morethan2sirenchirpsandremotebeepsindicateatriggerhasoccurred.The„DISARM“text isreplacedbytheAlarmreport.**

* See“RemoteandSystemOperations”onpage54fordetails.** See“AlarmFeatures”onpage41fordetails.***See“RemoteStartError”onpage52fordetails. ForManualtransmissionvehiclessee“ManualTransmissionStart(MTSmode)”on page50formoredetails.


Advanced Commands: (Level 1)

Pressandreleasethe buttononetimefirst,beforepressingoneofthefollowingcommandbuttons.

Silent Arm – Press and release The alarm arms, doors lock (if connected), and the parkinglightsflashonce.The„SILENT ARMED“textplaystoconfirmandtheSystemStatus iconsupdate.Valetmode*orTriggerZoneFaultreport**messagesmaybereceived.

Silent Disarm – Press and release Thealarmdisarms,doorsunlock(ifconnected),andthepark-inglightsflashtwice.The„SILENT DISARM“textplaystocon-firmandtheSystemStatusiconsupdate.TheAlarmreport**mayreplacetheSilentDisarmtext.

AUX 1 – Press and release Activates(orifOn,deactivates)theAux1output.The„AUX

CHANNEL“textandOntonesorOfftonesplaytoconfirm.

Runtime Reset (only 5606V) – Press and release Ifmoretime isneededwhile remotestart isactive, runtimeresetwill resettheruntimecountertothepre-programmedsetting.The„RUNTIME“ textandtonesplaytoconfirm.Thetextfieldwillupdateifsettodisplayruntime.

Note!

RemoteStartmustbeOntousethisfeature.

Temp Request – Press and hold the -button Requests the vehicle’s interior temperature and temporarilydisplaysitviastatusscreenicon andtextfield.

* See“RemoteandSystemOperations”onpage54fordetails. ** See“AlarmFeatures”onpage41fordetails.


CHANNEL“ text and On tones or Off tones play to confirm.

Timer Start** (only 5606V) – Press and release Activates (or if On, deactivates) Timer Start. The parkinglightsflashquicklyfourtimesforOnandslowlyfourtimesfor Off. The „TIMER START ON“ or „TIMER START OFF“ textandbeepsplaytoconfirmandtheRemotestartstatusiconsupdate.

Note!

SystemneedstobearmedorTimerStartwillnotstarttheengine.

Runtime Remaining (only 5606V) – Press and hold the button

RequeststheremainingRemotestartruntimeandtemporarilydisplaysitinthetextfield.

Note!

RemoteStartmustbeOntousethisfeature.


Press and release the button two times first, before pressingoneofthefollowingcommandbuttons.

Sensor Bypass – Press and release Theparkinglightsflasheachtimethiscommandisreceivedto indicate the Sensor bypass type. Two flashes indicatessensorWarnawayzonesarebypassed.„BYPASS WARN“,onebeepandonefaulttoneplaytoconfirm.3flashesindicatessensorWarn-awayandFullTriggerzonesarebypassed.„BY-PASS FULL“,onebeepandtwofaulttoneplaytoconfirm.OneflashindicatessensorbypassisOff,„BYPASS OFF“ and onebeepplaytoconfirm.

Note!

Systemneeds tobearmedtoperformSensorBypass. PerformarmcommandanytimetoturnSensorBypassOff.

Remote Valet* – Press and release Enters (or ifOn, exits)ValetMode. The„VALET“ text andbeeps(oneforOn,twoforOff)playtoconfirmandtheSys-temStatusiconsupdate.SeeValetModeformoredetails


* See“ValetMode”onpage55formoredetails. ** See“AdvancedStart”onpage47formoredetails.


Note!

SystemneedstobearmedorSmartStartwillnotstarttheengine.

Alarm Report* – Press and hold the button Requestsareportofthemostrecenttriggersandtemporarilydisplaysitinthetextfield.Thereportclearswhentheignitionis turned on.


Press and release the button three times first, before pressingoneofthefollowingcommandbuttons.

Sensor Silent Arm* – Press and release The alarm arms, doors lock, the siren chirps and parkinglightsflashthreetimes.The„SENSOR SILENT ARM“textandbeepsplaytoconfirmandtheSystemandSirenStatusiconsupdate.

Car finder – Press and release Thesirenemitsonelongchirpandtheparkinglightsflashfor10 seconds.The„CAR FINDER“ textandbeepsplay toconfirm.TheparkinglightflashesstopifarmedordisarmedwhileCarFinderisinprogress.


CHANNEL“ textandOntonesorOfftonesplaytoconfirm.

Smart Start** (only 5606V) – Press and release Activates (or if On, deactivates) Smart Start. The parkinglightsflashquicklyfivetimesforOnandslowlyfivetimesforOff.The„SMART START ON“ or „SMART START OFF“,textandbeepsplaytoconfirmandtheRemotestartstatusiconsupdate.

* See“AlarmFeatures”onpage41formoredetails. ** See“AdvancedStart”onpage47formoredetails.


Responder LC Configuration

Operations of the Responder LC and how it communicates messages are set in the configuration Main Menu.

Navigating menus and options Navigating menus and features, changing options, and exiting are performed using the remote control buttons.Thefollowinginstructionsdiscusshowtoaccessandconfig-ure the settings.

Button operation

• Toaccessmenus, setoptions,and toperformactions thataredisplayedinthetextfield,usethe button.

• Toscrollthemenulists inthetextfieldusethe & buttons.

Toexitconfiguration:usethe or buttons.

Access menu items

• Pressandholdthe buttonfor8seconds,theremotewillbeeponce,„MAIN MENU“isdisplayed.(IfCar2ison,ignoretheCarSelecttextandbeepafterthreeseconds).

• Releasethe buttontodisplaytheMainMenuitemlist,


Press and release the button four times first, before pressingoneofthefollowingcommandbuttons.

Full Silent Arm* – Press and release Thealarmarms,doorslock,andthesirenchirpsandparkinglightsflash4times.The„FULL SILENT ARM“textandbeepsplaytoconfirmandtheSystemandSirenStatusiconsupdate.


CHANNEL“textandOntonesorOfftonesplaytoconfirm.

Defogger** (only 5606V) – Press and release ActivatesthevehicleDefoggercircuit(ifconnected)whileRe-moteStartisactivated.The„DEFOG ON“textandbeepsplaytoconfirmandtheRemoteStartstatusiconsupdate.Forconve-nience,theDefoggercircuitwillalsoautomaticallyactivate10secondsafterremotestartingifthetemperatureisbelow55°F.

Note!

RemoteStartmustbeactivetousethisfeature.

* See“AlarmFeatures”onpage41formoredetails. ** ThisfeaturemustbeinstalledandturnedonbyanauthorizedDirecteddealer.


„SETUP REMOTE“isdisplayed.

• TheMainMenuhasbeenaccessedandconfiguringcanbe-gin.UsethefollowingprocesstoviewtheMainMenufea-tures,optionsandsettings inthetextfield.Thefollowingactions are commonly used throughout the configurationoperation.

• Pressthe or buttonstochangethefeatureoropti onthatisdisplayedinthetextfield.

• Pressthe buttontochoosethefeatureinthetextfield andviewitsoptions.Pressitwhenthedesiredfeatureor optionisinthetextfieldtosetitasthenewsetting.

Main Menu

The followingMainMenu list of features is available forconfiguration of the remote control.

Setup Remote menu

• Keypad Lock Options:„OFF“,„AUTO“

When„OFF“,thebuttonsdonotlockandalwaysperformacommandwhenpressed.Whensetto„AUTO“,theremotebuttonslockaftera20secondlapsebetweenbuttonspress-estopreventunintentionaloperations.Ifabuttonispressedwhenlockedafaulttoneplaysasanalertfollowedbyun-lockinstructionsinthetextfield.

Tounlockthebuttons,pressthe buttonfollowedbythe

button.Theunlocktonesplayand„READY“isdisplayedinthetextfield,acommandcannowbeperformed.

Auto unlocking Afterturningtheignitionoff,amessagetotheremotewillunlockthekeypadbuttonsthenextcommandisperformed.IfAutoUnlockingisnotdesiredthismessagecanbeturnedoffbyanauthorizedDirectedDealer.

• Page Mode Options:„POWER SAVE“, „OFF“, „ON“• Paging is how the Responder LC remote monitors your


system’smessages.„POWER SAVE“ extendsbattery lifebyturningPagingOffafteroneweekiftheremotecontrolisnotusedduringthisperiod.Justpressanybuttontoresumesystemmonitoring.Whensetto„ON“itwakesupeveryfewsecondstolistenforpagesfromthesystem.Whensetton„OFF“itdoesnotwakeuptoreceiveremotestartoralarmtriggerpages.

Note!

When„OFF“,responsesarestillreceivedwhenacommandisperformedbutalarmtriggerpageswillnotbereceived.

• Page Alert Options:„TONE VIBE“, „TONE“, „VIBE“, „SCREEN ONLY“

There are severalways for theResponder LC to alert youwhen it has received a message from the system. „TONE VIBE“will alert by both emitting tones and vibrating theremote. Select „TONE“ to be alerted by tones that areuniqueforeachmessage.Select„VIBE“andtheResponderLCwill silentlyalert youwithagentlevibration,or select„SCREEN ONLY“whenyoudon’twanttobeinterrupted.

• Remote Start Info (only 5606V) Options:„RUNTIME“, „TEMP“, „CLOCK“

Thetextfieldcanbesettodisplaytheinformationyoupre-fer during remote start. „RUNTIME“:RemoteStartRuntime,„TEMP“:vehicleinteriorTemperature,orthe„CLOCK“ will bedisplayedinthetextfieldwhileRemoteStartison.

• Runtime Alert (only 5606V) Options:„ON“, „OFF“

The main unit will send a page to alert you when the runtime is about to expire.When set to „ON“, an alert isgenerated when the Remote Start Time-out message is received. When „OFF“, no alert output is emitted for the message.

• Car 2 Options:„OFF“, „ON“,„HOME“

Thisremotecancontroltwosystemsindependently.Whenset to „OFF“,theCar2selectoptionisnotavailable.Whenset to „ON“theremotecanbesettocontroltwosystems.The„HOME“optionisforpairingtoahomesecuritysystem.

• Screen Color Options: „OFF“, „WHITE“, „LT GRN“, „VIOLET“, „AQUA“,

„RED“, „GREEN“, „BLUE“

Thestatusscreenbacklightingcanbe„OFF“,orwillilluminatewitha selectedcolorduringoutputwhenset tooneof the optioncolors.

• Temp Unit Options:„F“, „C“

Temperaturecanbedisplayedinyourchoiceoftemperaturescales,Fahrenheit or Celsius.


• Button Beep Options:„ON“, „OFF“ Whensetto„ON“,theremotewillemitabeepasconfirmationofabuttonpress.Whensetto„OFF“,beepsarenotemittedforbuttonpresses.

• System Type Options:„SEC“, „RKE“ Selectsthetypeofsystem,namely;SecurityorRemote Key-

less Entrytowhichtheremotehasbeenpaired,andadjuststhetextandmainmenuaccordingly.Thishasbeenpre-setbythefactoryforyoursystem.

• Clock Set Options:„HOUR“, „MIN“

• Review Displaysfirmwareversion • Exit Exitsandreturnstothemainmenu

Sensor Adjust Ifyoufeelyoursecuritysystemshocksensoristoosensitiveornotsensitiveenough,itishighlyrecommendedthatyoucontact your authorized Directed dealer/professional andhave the sensor adjusted foroptimized securitydetectionperformance.

Pair Remote RemotePair isaprocesswheretheResponderLCandthesysteminthevehiclelearneachothersencryptedidentifica-tion, securing their communication from intruders. Pleasenotethatyourremotecontrolscomepre-programmedfromthefactory.

Prepare the vehicle system to be Paired with a new remote

• Openatleastoneofthevehicle’sdoors.

• TurnthekeytotheOnposition.

• WithinfivesecondspressandreleaseonetimetheControlbuttonontheControlCenter.

• Withinfiveseconds,pressandholdtheControlbutton.ThestatusLEDwillflashonetimeandthesirenwillchirponcetoconfirmthesystemisreadyforremotepairing.

• ReleasetheControlbuttonandproceedbelow.

Note!

Ifpairingdoesnot resultwithin60 seconds, the systemwillexitandthesirenwillchirp.

Prepare the new remote to be Paired with the system

• MakesuretheremotecontrolissetforthedesiredCar1orCar2operation.


• PerformthestepsunderAccess menu items section to access thePairRemotemode.

• Whentheremotebeepsthreetimesand„PAIR“isdisplayedtheremoteisreadytopair.

• Pressthe button.

• Waitseveralsecondsforfeedbackastheremotegeneratesa security encryption and sends it to the Control Center. IfPair is successful thesirensoundsandtheremoteemitsseveraltones.ThescreendisplaysifthePairingissuccessfulor failedwithcorrespondingtext. Ifpairing failed, repeatstep4.

Demo mode DemoModeplaysapre-selectedgroupofanimationsasademonstration tool to show friends or family. RunningDemomodeshortensthebatterylifeovertimeifusedex-cessively

• „SINGLE SILENT“: The remotewilldisplaya selectionof icons on the status screen without beepsandtonesthenstop.

• „SINGLE SOUND“: The remotewilldisplaya selectionof iconson the status screenwithbeeps andtonesthenstop.

Power Off Whenanextendedperiodofnon-operationisanticipated,turningthepoweroffwillpreservethebatterycharge.Pressthe buttonwhile„POWER OFF“isdisplayed.Thestatusscreeniconsclearasthepowerofftonesplay,theremoteisturned off.

To turn the remoteon,Pressandhold the button forthreeseconds,thestatusscreeniconsrefreshasthepoweron tonesplay. The remotealso turns itself onandbeginschargingwhenthebatterychargerisconnected.

Exit Toreturntonormaloperation,pressthe buttonwhileEXITisdisplayed.


1-way Companion Remote Control

Button Direct Access x1 LEVEL 1 x2 LEVEL 2 x3 LEVEL 3 x4 LEVEL 4

Arm/Lock(Panic) SilentArm SensorBypass SensorSilentArm FullSilentArm

Disarm/Unlock SilentDisarm RemoteValet CarFinder

RemoteStart(only5606V)RuntimeReset(only5606V)

TimerStart (nur5606V)

SmartStart (nur5606V)

Defogger (nur5606V)

Aux/Trunk AUX1 AUX2 AUX3 AUX4

NotUsed UsedtoaccessfunctionlevelsforAdvancedCommands

Using the 1 way companion remote The companion 1way remote commands the system fea-turesasshownintheprevioustable,butwithoutthemes-sagedisplayoftheResponderLCremote.Sirenchirpsandparkinglightflashesareusedtoindicatethatacommandhas been received and activated as described in theBasic and Advanced command sections.

Accessing Commands Similar to the Responder LC remote, Basic commands areperformed when a command button is pressed directly. ToperformAdvancedCommandspressthe buttonone


to four times to access function x4inthetableforexampleimpliespressing fourtimes.TheLEDflashesingroupsforafewsecondstoindicatethelevel.PressthedesiredcommandbuttonwhiletheLEDisflashingtoperformthecommand.

Button Auto Lock WhenOn,theremotecontrolbuttonslockifmorethan20secondslapsesbetweenbuttonpresses.Ifabuttonispressedwhenlocked,afaulttoneisemitted.Tounlockthebuttons;pressthe buttonfollowedbythe button,thebuttonsunlockandtonesplaytoconfirm.

Car Select Car2mustfirstbeturnedOn(SeeRemoteFeaturesmenuunder “Programming” on page 44 to turn on). Press andhold the buttonfor3seconds.TheremoteflashestheLEDandbeepsonceortwicetoindicatetheselectedCaris1or2,releasethebuttonforCarSelectorcontinuetoholdfor programming. Release the button, thenpress andreleasewhile theLEDandbeeps continue toperformCarSelect.Oncethecarisselectedacommandcanbeperformedbypressingoneofthecommandbuttons.

Programming Toenter:Pressandholdthe buttonforeightseconds,theremoteemitsonelongbeepandturnstheLEDon,theprogrammingmainmenuhasbeenaccessed(seemenulist-ingsbelow).Toexit:Pressandreleasethe buttononce,thenpressandholdthe buttonagain.Oneshortandone

longbeepisemittedforeachstepback,theLEDturnsoffwhenprogrammingisexited.

1. Sensor Adjust Toavoidunintendedalarmtriggers,itisrecommencedthatanauthorizedDirecteddealerperformallsensoradjustments.

2. Remote Features menu Afterenteringtheprogrammingmode:Pressandholdthe

button,twoLEDflashesandbeepsindicatetheremotefeaturesmenuisaccessedandcanbeset.Pressbuttonsindi-catedbelow,1beepandflashturnsthefeatureon,2beepsand flashes turns the feature off.

• Autolockfeature:Press to turn on/off.• RemoteBeeps:Press to turn on/off.• Car2feature:Press to turn on/off. Tosaveandexittheremotefeatureprogramming,pressthe

buttononceandthenpress/hold,thetransmitLEDshutsoffconfirmingexit.

3. Remote Learning Preparethethevehiclesystemtobepairedwithanewremote:• Openatleastoneofthevehicle’sdoors• Turnthekeytotheonposition• Withinfivesecondspressandrelease1timethecontrolbut-

ton on the control center.• Withinfivesecondspressandholdthecontrolbutton.thestatusLEDwillflashonetimeandthesirenwillchirponcetoconfirmthesystemisreadyforremotepairing.

• Releasethecontrolbuttonandproceedbelow.


Note!

Ifpairingdoesnot resultwithin60 seconds, the systemwillexitandthesirenwillchirp.

Prepare the 1-way remote to be paired with the system• Makesuretheremotecontrolissetforthedesiredcar1orcar2operation.

• Press/holdthe buttonontheremoteforeightseconds,the transmitLEDcomeson, theprogrammingmainmenuhasbeenaccessed.

• Press/holdthe buttonuntilthetransmitLEDflashesandcomes on solid.

• Pressthe buttonontheremote.• WaitseveralsecondsforfeedbackastheremotegeneratesasecurityencryptionandsendsittotheControlCenter.Ifpairingissuccessfulthesirenwillchirp.

Ifpairingisnotsuccessfulpressandreleasethe buttononceandthenrepeatsteps3and4.

Alarm Features

Normal Arm Protection

• StatusLED:TheControlCenterStatusLEDflashesasavisualindicatorthatyourvehicle’ssecuritysystemisactive.

• StarterKill:TheFailsafestarterkillrelaypreventstheenginefrom starting

Note!

Mayrequireadditionalpartsandinstallation

• Sensortriggers:Theshocksensorcandistinguishminorim-pactsfrommajorimpactstothevehicleexterior.Minorim-pacts causes the system to emit a Warn-away output bychirpingthesirenandflashingtheparkinglightsforthreeseconds.Majorimpactscausedforexamplebyaforcibleen-tryattempt,resultsinaFullTriggeroutput.Thesirensoundsandtheparkinglightsflashfor30secondsorlonger.BothWarn-awayandFullTriggerssendamessagetotheremotecontrol.

• Pointofentrytriggers:OpeningthehoodortrunkcausesaFullTriggeroutput,whileopeningaDoororturningontheIgnition causes the the siren to chirp three secondsbeforebeginning the Full Trigger output. This three seconddelayallows time to disarm and silence the siren in case of acciden-taltrigger.TheFullTriggermessageisstillsenttotheremote.


Sensor Silent Arm protection SensorWarn-awayandSensorFullTriggeractivationsonlysendmessagestotheremote,whiletheparkinglightflashandsirenoutputsaredefeated.Pointofentrytriggerswillactivate the parking light flash, siren, and sendmessagesnormally.

Full Silent Arm Protection SensorWarn-away, Sensor Full Trigger and Point of Entryactivations will only send messages to the remote, withparkinglightflashandsirenoutputsdefeated.

Sensor Warn-away Messages WhentheremotereceivesaSensorWarn-awaymessageitemits 10 beeps (if on) and displays a sensor zone specific„SENSOR WARN“textfor30seconds.Warn-awaymessagescannotbereviewedordisplayedinreports.

Full Trigger Messages A Full Triggermessagegenerates a Full Triggeroutputofsirentonesandzonespecific„TRIGGER“textfollowedbyanalertthatconsistsofonelongbeepperminutefor10min-utes.Tostoptheoutputandalert,pressacommandbuttontoperformacommand,orPressthe button.

Emergency Override The following procedure disarms the systemwhen a pro-

grammedremoteisnotavailable.Numberofpresses______

• TurntheignitionOn.

• PressthecontrolbuttonontheControlCenterthecorrectnumberoftimes(thedefaultisonepress).

• Afterafewsecondsthesirenoutputceasesandthesystemis disarmed.

Note!

Asaprecaution,ifprogrammedforPassiveArmingorAutore-armingthesystemshouldbeplacedintoValetModeun-tilaremoteisavailable.

Trigger Zone Fault Report Whenarmedbyremotecommandthesystemrunsastatuscheck of the alarm trigger zones. Faulty zones (usuallycausedbydomelightdelayoropentrunk)arebypassedandreportedvia thecontrol centerLEDand remote,whileallothertriggerzonesremainactiveandaremonitoredtopro-tect the vehicle. Should a faulty zone self correct (domelight turns off) it becomes active and is then monitored normally.

The siren chirps once again a few seconds following thearming chirps as an audible alert, the control center LEDflashesingroupstoindicatethezonenumber.Theremotewillemitasinglefaulttoneandplayzonespecifictextthatidentifiesthefaultyzones.


Alarm Report when disarming Themostrecentalarmtriggers(ifany)arereportedwhenthealarmisdisarmedviatheremotecontrol,sirenchirps,parkinglight and control center LED flashes. The siren chirps fourtimes(orfivetimesifNPCOn*),theparkinglightsflashthreetimes,andthecontrolcenterLEDflashesingroupstoindicatethelasttwozonesthatweretriggered(seeTableofZones).The„DISARM“textisreplacedby„ALARM REPORT“andtextidentifyingthetriggers.

Table of Zones

Zone (led flashes) Zone Name

1 Trunk

2 ShockSensor

3 Door

4 Sensor2

5 Ignition

6 Hood

* See“NuisancePrevention(NPC)”onpage45formoredetails.

Alarm Report when requested TheAlarmReportdisplaysthetwomostrecentalarmtrig-gersdependingonthesystemstatewhenrequested.Whendisarmed, the reportwill display text to identify the twomostrecenttriggerssincethevehiclewaslastdriven.Whenarmed,thereportwilldisplaytexttoidentifythetwomostrecenttriggerssincethesystemwasarmed.

Note!

TheAlarmReportclearswhenignitionisturnedon.

Nuisance Prevention (NPC) NPCmonitorsallalarmzonesand,ifanyaretriggeredexces-sively, bypasses them until corrected. If a point of entry(trunk,hood,door)isleftopenfollowingaforcedentry,itisbypassed. Itbecomesactiveagainonlyafterbeingclosed.Bypassedsensorsautomaticallyresetafteronehourandaf-terthevehicleisdriven.Disarmingthenre-armingthealarmdoesnotresetbypassedsensors.


Remote Start Features (only 5606V)

Key Takeover Whenyouarereadytodrive.Thesystemkeepstheenginerunninguntilthevehicleisreadytobedriven.ToperformKeyTakeover:

• Disarmthesystemandenterthevehicle,donotsteponthefootbrake.

• Insertthekey,turnittotherunposition,andthensteponthefootbrake,theremotestartthenturnsoff.

• Theparking lights turnoff to indicate remote start isoff,andthenafterafewsecondstheremoteplaysthe„REMOTE START OFF“ message.

• Thevehicleisreadytodrive.

Remote Start Safe-lock Remote start safe-lock makes sure the doors are lockedwhile the engine is running and after, even if they are unlockedwhen remote start is activated. Door locksmay requireadditionalpartsandlabor.

Disabling Remote Start* RemotestartcanbedisabledbymovingtheToggleSwitchtotheOffposition.IfremotestartisattemptedwhileOff,

theenginewillnotstart.MovetheswitchbacktotheOnpositiontoresumenormaloperation.

Advanced Start TheAdvancedstartfeaturesTimerStartandSmartStartwillautomaticallystarttheenginetomaintainbatterychargeorcombatextremecoldwhenparkedforanextendedperiodof time.

Precautions for the Advanced Start features:

• Park the vehicle in a well ventilated area away from windowsanddoorsthatleadintoinhabitedspaces.

• ArmandLockthevehicle, theenginewillnotstartunlessthedoorsarelocked.

• Only one Advanced start feature can be enabled at any giventime.

• FormanualtransmissionvehiclesMTSmodemustbeenabledbeforeTimerStartorSmartStartcanbeactivated.

• TimerStartor Smart Startmodeautomaticallyexitswhenthevehicleisdisarmed.

* See“RemoteStartError”onpage52.


Timer Start operation Activationbeginsacountdowntimerassetbytheinstaller(default3hours).Whenthetimerexpirestheenginestartsand the „REMOTE START ON“ message is sent to the remote control.WhentheRemotestartruntimeexpirestheengineshutsoff,the„REMOTE START OFF“ message is sent to the remotecontrolandthecountdowntimerrestarts.Thiswillrepeatasmanytimesassetbytheinstaller(default6starts).TimerStartisexitedafterthefinalstart.

Smart Start operation SmartStartusesthesettingsforTimerStartinadditiontotemperature and battery level to automatically start the engine.Activationbeginsthecountdowntimer.Whenthetimerexpiresthevehicle interiortemperatureandbatterylevel is checked and, if the Temperature is above 100°F, below0°F,or thebattery level isbelow10.5V, theenginewill start and the „REMOTE START ON“messagewillbesentto the remote controls. When the Remote start runtime expires the engine shuts off, the „REMOTE START OFF“ message is sent to the remote control and the countdown timerrestarts.SmartStartisexitedafterthefinalstart.

Note!

ThetemperatureandbatterythresholdscanbechangedbyanauthorizedDirecteddealerifahigherorlowerthresholdis desired.

Temperature Reporting DuringRemotestartthevehicleinteriorischeckedregularlyfor temperature changes. If a change in temperature is detectedthisreportwillbesenttotheremotefordisplay.Each time the remote receives this report it will beep, update, and display the newest temperature informationusingtheTemperatureGaugeicon.

Note!

Temperature reportmust be turnedonby an authorized Directeddealer.

Remote Start Time-out Alert Duringremotestartamessageissentthreeminutesbeforeandagainatoneminutebeforetheengineturnsoff.The„RUNTIME LOW“textplayswithtonesasanalerttoresetthe runtime if desired.

Pit Stop Mode Toexitvehiclewithenginerunning.Thesystemkeepstheenginerunningduringshorttripsintothehouseorconve-nience store.

To perform Pit Stop:

• Withtheenginerunning,settheparkingbrakeandreleasethefootbrake.


• Pressthe button,theparkinglightswillturnonandthe„REMOTE START ON“messagewillplayontheremotecontrol.

• Turn thekey tooff, and remove it from the ignition, theenginecontinuesrunningfortheprogrammedruntime.

• Exitthevehicleandarmthealarm.

Note!

ForPit Stoponmanual transmissionvehicles followthedirections intheManualTransmissionStart (MTSmode)sectionwiththedooropen.

Manual Transmission Start (MTS mode) When installed into a manual transmission vehicle, the system requires that theMTSmode is properly set whenparking.IfMTSmodeisnotproperlysetorisdefeatedafterbeingproperlysetthesystemwillnotstarttheengineandthe „REMOTE START ERROR“textandtonesplayasanalert.

• Withtheenginerunning,pressthefootbrakethensettheparkingbrakeandleavetheenginerunning.ForPitStoporTurboTimermode(toleavetheenginerunningafterarm-ing)openthedriverdoor.

• Release the foot brake. As long as the engine is runningthereisnotimelimittoperformthisstep.

• Within20secondsoffootbrakerelease,pressanycommand

buttonontheremote,after20secondsreturntoStep2(ForTurboTimerMode,presstheoptionaldashmountedactiva-tionbuttonorsendtheTimerModecommandfromtheAd-vancedStartmenuscreen).

• TheparkinglightsflashfivetimestoconfirmMTSmodeen-ableandtheremotestartactivatestheignitionoutputs.The„REMOTE START ON“textandbeepsplaytoconfirm.

• TurnOffandremovethekeyfromtheignitionswitch,theengine remains running.

• Exitthevehicle,closeallthedoorsandarmthesystem.

• Theengineturnsoffandafterafewseconds,the„REMOTE START OFF“.messageplaystoconfirm.IfthedoorisopenedinStep3thentheenginecontinuestorun.

Turbo Timer Mode Thesystemkeepstheenginerunningfor theTurboTimerruntimeandcanbeactivatedbyremotecontroloroptionaldashmountedactivationbutton.

• Withtheenginerunning,settheparkingbrake.

• Presstheoptionaldashmountedactivationbuttonorper-form the TimerMode command (formanual transmissionvehicleseepreviousMTSmodesection).

• Theparkinglightsturnonandtheremotestartactivatesthe


ignitionoutputs.The„REMOTE START ON“textandbeepsplaytoconfirm.

• TurnOffandremovethekeyfromtheignitionswitch,theengine remains running.

• Exitthevehicle,closeallthedoorsandarmthesystem.

• TheenginerunsfortheTurboModeruntime.

Note!

TurboTimermustbeturnedonbyanauthorizedDirecteddealer.ForTurboTimermodeonmanualtransmissionve-hicles follow the directions in the Manual TransmissionStart(MTSmode)sectionwiththedooropenandinstep3sendtheTimerModecommandfromtheremotecontrol.

Remote Start Error Forusersafety,thesystemmustbeproperlyconfiguredorremotestartwillnotactivate.Iftheremotestartfailstoac-tive,refertothefollowingtableforthescreensandparkinglight flashes thatwill identify the configuration issueandresolution.

Flashes* Possible Fault Solution

5 Brakeon Releasefootbrake

6 Hoodopen Close hood

7

AfterperformingRemo-teStartcommand-MTSnotenabled

EnableMTSmode

AfterperformingTimerStartorSmartStartcommand

CheckallSolutions

8 ToggleSwitchoff Turnswitchon

None Alarmistriggered Disarmorresetalarm

* Referstothenumberofparkinglightflashes.


Remote and System Operations

Passive Arming* Park and exit the vehicle, after the doors are closed the Passive arming countdownbegins. The led flashesquicklyandupon reaching20 seconds the siren thenchirpsonce. At30secondsthesystemarmsitself.

Anytimebeforethesystemarmsyoucanre-enterthevehicleoropenthetrunktoloadorunloaditemsand,afterclosingpassivearmingresumes.

Tostaysecureincaseofaccidentaldisarmingthesystem,ifadoorisnotopenedwithin30secondsthesystemre-armsitselfandlocksthedoors.

Auto Re-arming* Autore-armensuresthevehiclestaysprotectedif it isnotenteredafterdisarmingbyremotecontrol.Afterdisarmingbyremote,thealarmautomaticallyre-armsitself(andlocksthedoorsifprogrammedon)in30seconds.Openanypointofentrytostopthere-armuntilthenextdisarmbyremote.

Onetime Bypass* TurntheignitionOnforonetothreesecondsandthenOff.Thesirenchirpsoncetoconfirmone-timebypassisenabled.One-time bypass can be used to temporarily bypass the

* ThesefeaturesmustbeturnedonbyanauthorizedDirecteddealer.

Passivearmingoperationforonecycle.Italsobypassesthecomfortclosureandauxiliarychanneloutputsprogrammedtoactivatewhenarming.After thenextdisarmallopera-tions return to normal.

Valet Mode Valetmodecanbeenteredandexitedbyperforming theRemoteValetcommandormanuallyusingthevehiclekeyandthecontrolbutton.Whenentered,thealarmfunctionsare defeatedwhile the convenience features still operatenormally.ArmandDisarmcommands lockandunlockthedoors while the „VALET“textandbeepsplaytoconfirm.

Use the following steps to manually enter and exit Valet Mode:

1. TurntheignitionswitchOnandthenOff

2. Immediatelypressandreleasethecontrolbuttononce

3. The control center LED turns On when entering and Offwhenexiting.

Power Save ToreducepowerconsumptionthecontrolcenterstatusLEDmodifiesitsoutputifthevehicleisparkedforanextendedperiod. If Armed the flashing is reduced after 24 hours.WhenValetmodeisOntheLEDwillturnoffonehourandwill reset each time the ignition is turned off.


Rapid Resume If power is everdisconnectedby amechanic or thief, thesystemwillresumethestateitwasinatthetimeofdiscon-nection,whenpowerisreconnected.

Automatic Remote Updates The system sends a silentmessage to all remote controls after any major action has occurred. When the remote receives this message it updates the status screen icons. This way all users are able to quickly review the system statusjustbyaccessingthestatusscreen.

Out of Range Eachtimeacommandisperformedtheremotewillexpect a command confirmation from the system. If a commandconfirmation is not received the out-of-range icon and afaulttonewillplayasanalert.

No Remote Output Occasionally when a command is performed the remotemaynotgenerateacommandconfirmationoutputorOutofRangeoutput.Thisindicatesthatthesystemreceivedthecommandbutitwasanincompletecommand(e.g.Auxbut-tonpressedtooshorttoactivatethetrunkrelease)oritwasanillegalmessage(e.g.thecommandwascorruptedduetolocal RF interference). These are temporary normal func-tions of the system and remote, perform the commandagainwithin10secondstoreturntonormaloperation.

Feature not Available The„NOT AVAILABLE“messageisagenericonewhichvariesincauseandsolutiondependinguponthecommandused:

Command Cause Reason / Solution

RuntimeReset RemoteStartisOffOnlyavailablewhenRemoteStartisOn

SensorBypassSystemisnotarmed

Onlyavailablewhensystemisarmed

DefrosterRemoteStartisOff.Notconfigu-red for this.

OnlyavailablewhenRemoteStartisOn.Onlyavailablewhenconfigured forDefrostercontrol.

LCD Remote Battery Run-Down If the remotebattery isdown so far that the LCDwillnotcomebackon,evenwhenpluggedintothewallcharger.Theremedyforthatistopressandholdthe“F”(function)buttonwhilepluggingitinand/orjustleaveitpluggedinfor15minormoreanditwillcomebackup.


System Expansion Options

Controlling two vehicles (Car Select) TheResponderLCand1waycompanionremotecancontrolsystemsintwodifferentvehiclessavingtheneedformulti-pleremotecontrols.Thisfeaturealsoallowsforcustomizedsystemconfigurationsoneachvehicle thathasmore thanonedriver.SeeOwnerRecognitionfollowingfordetails.

Owner recognition Thesystemcanbeconfiguredtorecognizetheremoteused

when disarming and change selected features to match the remote users preferences.Memory seat adjustment, sirenchirps,passivearming,remotebuttonautounlocking,alarmoutputdurationcanallbecustomsetforeachremoteuserat the time of installation.

Comfort closure ComfortClosureemulatesturningthekeyinthedoorcylinderorholdingthe lockbuttonofanOEMkeylessentry. Itwillautomatically close the windows and sunroof on vehicleswiththistypeofOEMconveniencefeature.

Alarm output duration Thelengthoftimethesirensoundscanbeadjustedfrom1to180secondsatthetimeofinstallation.

Arming and Warn-away chirp control ThesystemArm,DisarmandSensorWarn-awaychirpscanbe configured for those thatprefera customsilentalarmoperation.

Driver door priority unlocking ThedoorunlockingoperationcanbeconfiguredtoemulateanOEMstyleofdriverpriorityunlockingforaddedsecurityduring disarming.

Auxiliary Channels TheAuxiliaryChanneloutputsofthissystemcanactivatemanyoftheconveniencefeaturesfoundintoday’svehicles.OnceacommandisperformedtoactivateaconveniencefeaturetheResponder LC displays text that matches the feature. The systeminstallercanclarifyifanyofthebelowlistedfeaturesarecompatiblewithyourvehicle.

• Windowsopen/close• LeftSlidingdooropen/close• RightSlidingdooropen/close• RearHatchopen/close• Sunroofopen/close• Audiosystem• Headlights


Battery Information (Responder LC)

TheResponderLCremotecontrolispoweredbyaninternalrechargeablebatterythatcanbeservicedonlythroughanauthorizedDirectedElectronicsdealer.Theinformationandprecautionsinthissectioncanhelpmaximizeyourbattery’slifeandusageinprovidingyourResponderLCremotecon-trolwithmanyyearsoftroublefreeoperation.

Note!

NEVERuseacableotherthantheoneprovidedorplugintoanunspecifiedsource. Injury,severedamageorex-plosionmayoccurwhenconnectedtoanyotherproductsorusedinawaynotintended.

Chargingthebatterywhenthetemperatureisbelow32°F(0°C)orabove113°F(45°C)maycauseseverebatterydam-ageand/orreducebatterylife.Avoidplacingtheremotecontrol inareasexposedtoextremecoldorheat(directsunlight)whenchargingthebattery.

Low Battery AfteracommandisperformedtheResponderLCand1waycompanion remote controls check their battery level and,when the level requires attention, will begin generatingalerts.Oncethealertsbegintheywillcontinuetocommandthesystemforseveraldaysbutshouldbechargedattheearli-estopportunityorfailuretocontrolthesystemmayoccur

Low Battery Alerts: Whendisarmingthesystemusingaremotewithalowbatterythesirenwillemitoneadditionalchirpasanalert.Ifconfirma-tionchirpsareprogrammedoff,thesystemwillstillemitonechirp as an alertwhen disarming. After performing a com-mand,„LOWBAT“andseveralbeepsplayontheResponderLCremotetoindicatethebatteryneedstobecharged.

Note!

To preserve power at critically low battery levels the ResponderLCturnsthepageroffandstopsreceivingmes-sagesfromthesystem. Itwillcontinuetocommandthesystemuntilthebatterycanbecharged.

Battery Life The Responder LC remote control has many features thatmakeitoneofthemostuniqueremotecontrolsonthemar-kettoday,includingsuperiorlongrangecommunicationwiththesystem.Thedefaultfeaturesettingsprovideforexcellentbatterychargeduration.However,tomaximizethisdurationbetweencharges,thefollowingsuggestionswillhelp:

• TurntheremoteOff:Whennotinuseand/oroutofrangeofthevehicletheremotecanbeturnedoffintheMainmenu.

• TurnPagingoff:Theremotewillnotwakeuptocheckformes-sageswithPagingoffintheSetupRemotemenu.Caution!Theremotewillnotreceivetriggermessagesfromthesystem.

• TurnBeepsoff:TheButtonbeepscanbeturnedoff in theSetupRemotemenu.Thecommandbeepsstillplaynormally.


Battery Information (1-Way)

The1-waycompanionremoteispoweredbyone3Vcoincelllithium battery (PN CR-2032) that will last approximatelyoneyearundernormaluse.

Battery Replacement

• Ifpresent,removethesmallscrewonthebackoftheremote.• Useasmallflatbladescrewdriverandinsertitintotheslotlocatedalongthebottomoftheremote,nearthekeyring.Carefullypryopenthecase.

• Gentlyslideouttheusedbatterytoremoveitfromthehold-ingclip.Orientthenewbatteryforthecorrectpolarityandinsertintoholdingclip.

• Repositioncaseparts,andsnaptogetherbypressingfirmlyandevenlyonthefrontandback.Reinstallscrew(ifappli-cable).

Battery Disposal

Directedcaresabout theenvironment. Ifyouneedtodis-poseof thebattery,pleasedoso inaccordancewithyourmunicipalrequirementsforbatterydisposal.

Glossary of Terms

Document Terminology

Control Module

The“brain”ofyoursystem.Usuallyhiddenunder-neaththedashareaofthevehicle.Ithousesthemicroprocessorwhichmonitorsyourvehicleandcontrolsallofthesystem’sfunctions.

ResponderLC(2-wayRemoteControl)

Ahand-held,remotecontrolwhichoperatesthevariousfunctionsofyoursystemandreceivesmessagesandpagesfromthesystem.

CompanionRemote(1-wayRemoteControl)

Ahand-held,remotecontrolwhichoperatesthevariousfunctionsofyoursystembutdoesnotprovidemessagedisplay.

Control Center

Thecontrolcentercontainsthesystem’sradio-frequencyantenna,thecontrolbutton,andtheStatusLED.Formaximumremote-controlrange,thecontrolcenterisusuallylocatedatthetopofthewindshield,centeredneartherear-viewmirror.

StatusLEDAlightusedtoindicatethestatusofyoursystem.Itislocatedonyoursystem’sControlCenter.

ControlButton

Asmallpushbuttonlocatedonyoursystem’scontrolcenter.Itisusedtooverride(disarm)thealarmwhenaremoteisnotavailableortoenterorexitValetMode.

64 © May 2015 ampire Electronics - All rights reserved

Platz für persönliche Notizen

ampireELECTRONICS

© 2015 AMPIRE ELECTRONICS. Alle Rechte vorbehalten. Nachdruck, auch auszugsweise nur mit schriftlicher Genehmigung.

LangwadenerStraße60D-41516GrevenbroichEmail:[email protected]

TechnischerSupport:Tel.:02181-81955-0

Email:[email protected]

www.ampire.de

AMPIRE ELECTRONICS.

Ein Kundenservice ist in vielenLändernerhältlich.Für nähere Informationen über VertretungenimAuslandwählenSie:+49-2181-81955-0.

Wir fokussieren auf zukunfts- orientierte Entwicklung anwen-derfreudlicherProdukte.Unser hoher Anspruch an Qua-lität, Funktionalität und Designzeichnet unsere Erzeugnisse aus. „GermanDevelopment“wirdbeiAMPIREwörtlichgenommen.

SeitderFirmengründungimJahr1987 hat AMPIRE ELECTRONICSnurdaseineZiel,demKundendiebestmöglichenAutoalarm-,Auto- hifi- und Multimediaproduktezu liefern, die auf dem inter- nationalenMarkterhältlichsind.

AlleFertigungsstättenundZulie-ferersindnachISO-9001bzw.QS-9000zertifiziert.DieQualitätsproduktevonAMPIREwerdenweltweitverkauft.

Documents

[ Owners-Manual ] MODEL 7756Vpdf.ampire.de/viper/7756V_bedienung_englisch.pdf · • The Control button, for placing the system into Valet Mode* and to perform the Emergency Override**