PUMP STRAINERS

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900 �

SSC-109STRAINER TO FIT SUNTEC A-70 SERIES PUMPS1 1/8” HighReplaces: 3715101(RS-939)

BOXED WITH S-70 GASKET

SSC-102STRAINER TO FIT SUNTECJ & H MODEL PUMPSReplaces: 131622(RS-950)

BOXED WITH S-7� GASKET

SSC-110STRAINER TO FIT SUNTECB MODEL PUMPS2 STAGE1 3/8” HighReplaces: 3715171(RS-917)

SSC-111STRAINER TO FIT SUNTECA & B MODEL PUMPSWITH HIGH COVER1 5/8” HighReplaces: 3715744(K-2646)



SSC-112STRAINER TO FIT SUNTECB2TA-8851 MODEL PUMPHigh Capacity Strainer16 GPH, 1 5/8” HighReplaces: 3715742


SSC-114STRAINER TO FIT SUNTECB2GA-8852 MODEL PUMPHigh Capacity Strainer23 GPH, 2 1/16” HighReplaces: 3715746


SSC-115“K” STRAINER TO FIT SUNTEC H PUMPNot for gear set with 6 screws.Replaces: 131066(RS-945)

BAGGED WITH S-7� GASKET

SSC-116STRAINER TO FITSUNTEC EARLY A PUMP1” High(RS-955)


SSC-117“P” STRAINER TO FITSUNTEC H PUMPSame dimension as J pump strainer excepthigh capacity.Replaces: 135722BOXED WITH S-7� GASKET

SSC-118STRAINER TO FIT SUNTEC LEVITT R-3 PUMP1 3/8” High


SSC-126STRAINER TO FIT RIELLOFor Mectron Series -3, 5, 10, 15 and 20Replaces: 3005719(O-ring and gasket not included)

SSC-126GSTRAINER TO FIT RIELLOBOXED WITH O-RING (R-64) AND GASKET (R-64A)For Mectron Series - 3, 5, 10, 15 and 20Replaces: 3005719

SSC-127STRAINER KIT TO FIT DANFOSS BFP FUEL PUMPSNew Style Pumps(2-Bolt Cover)Replaces: 071N1392BOXED WITH COVER

O-RING (D-�9)

Note: The SSC-127 also fits the Beckett Clean Cut Pump.

SSC-128STRAINER KITTO FIT DANFOSS CFP FUEL PUMPSOld Style Pumps(4-Bolt Cover)Replaces: 071H0015

BOXED WITH COVER O-RING (D-�8)

PUMP STRAINERS

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900�

PARTS TO FIT SUNTEC

PARTS AND GASKETS TO FIT SUNTEC A & B PUMPS

S-74GASKET TO FIT SUNTECEARLY A PUMP COVERReplaces: 160046(GS-139)Packed 50/Box

S-74ASAME AS ABOVE EXCEPTPACKED 12/HANGING BAG

S-67AO-RING TO FIT SUNTEC APUMP ADJUSTING SCREWReplaces: 3773201(GS-167)

S-66DIAPHRAGM TO FITSUNTEC A PUMPReplaces: 3773151(GS-165)

ACTUAL SIZE: � 3/4” OD

SP-367LIP SEAL TO FITSUNTEC A & B PUMPSReplaces: 3754734Made of Viton-Brown Color

ACTUAL SIZE: � 9/�6” X � 9/�6”

SHOWN ACTUAL SIZE

S-75COVER GASKET TO FITSUNTEC A-70 PUMPReplaces: 3779051(GS-129)Packed 50/Box


ACTUAL SIZE: � �3/�6” X � 7/�6”

S-70GASKET TO FIT SUNTEC A-70 PUMP COVERNew StyleReplaces: 3779801(GS-128)Packed 50/Box


ACTUAL SIZE: � �3/�6” X � 7/�6”

SSC-109STRAINER TO FIT SUNTEC A-70 SERIES PUMPS1 1/8” HighReplaces: 3715101(RS-939)


SSC-112STRAINER TO FIT SUNTECB2TA-8851 MODEL PUMPHigh Capacity Strainer16 GPH, 1 5/8” HighReplaces: 3715742


SSC-114STRAINER TO FIT SUNTECB2GA-8852 MODEL PUMPHigh Capacity Strainer23 GPH, 2 1/16” HighReplaces: 3715746


SSC-116STRAINER TO FITSUNTEC EARLY A PUMP1” High(RS-955)


SSC-110STRAINER TO FIT SUNTECB MODEL PUMPS2 STAGE1 3/8” HighReplaces: 3715171(RS-917)

SSC-111STRAINER TO FIT SUNTECA & B MODEL PUMPSWITH HIGH COVER1 5/8” HighReplaces: 3715744(K-2646)



Made of Viton for B5 & B20 Biofuel use

VITON RUBBER-BROWN COLOR

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900 3

PARTS TO FIT SUNTEC

S-79PORT GASKET TO FITSUNTEC A PUMPAluminum RingReplaces: 3773071(GS-166)SHOWN ACTUAL SIZE

SP-3391/4” PIPE PLUGWITH SQUARE HEADTO FIT SUNTECReplaces: 3729241

SP-3441/4” PIPE PLUGWITH HEX HEADTO FIT SUNTECFits intake and return.Replaces: 3729241(RS-914)SP-346

1/8” PIPE PLUGHEX HEADReplaces: 3759251(RS-923)

SP-3473/8” PIPE PLUGWITH HEX HEAD

SP-3511/16” BY-PASS PLUG TOFIT SUNTEC A, B PUMPSReplaces: 3779071(RS-944)

SP-3531/4” BY-PASS PLUG(RS-940)

SP-337BRASS BLEEDER VALVE TO FIT SUNTEC A, B, & J PUMPSUse with vinyltubing #OP-370.Replaces: 3759231(RS-986)

OP-370PLASTIC DRAIN HOSEFOR FUEL UNIT DRAINAGE10” Long

SP-3351/8” BRASS BLEEDER PLUG (PS-267)

SP-3361/4” BRASS BLEEDER PLUG(PS-268)

SP-338ALABEL TO FIT SUNTECA (REBUILT) PUMPSBlack BackgroundReplaces: 3779756(RS-1015)

SP-338BLABEL TO FIT SUNTECA (REBUILT) PUMPSWhite BackgroundReplaces: 3779760(RS-1016)

SP-338CLABEL TO FIT SUNTECB (REBUILT) PUMPSBlack BackgroundReplaces: 3779764(RS-1017)

SP-338DLABEL TO FIT SUNTECB (REBUILT) PUMPSWhite BackgroundReplaces: 3779786(RS-1018)

PM-369A1/8” PAPER MASKING PLUG(K-1378)

PM-369B1/4” PAPER MASKING PLUG(K-1379)

PM-369C3/8” PAPER MASKING PLUG(K-1380)

Ideal for pump rebuilders, use these plugs to prevent sprayed paint from entering and clogging internal pipe threads.

SP-334FUEL UNIT BLEEDER WRENCHIncludes plastic drain hose.

SSC stocks a complete line of Brass Flare Fittings and Brass Compression Fittings. Please see pages 85-88.

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-59004

PARTS TO FIT SUNTEC

PARTS AND GASKETS TO FITSUNTEC J & H PUMPS

SSC-102STRAINER TO FIT SUNTECJ & H MODEL PUMPSReplaces: 131622(RS-950)


S-71GASKET TO FIT SUNTECH, J, K PUMP COVERSReplaces: 110441(GS-135)Packed 50/Box

S-71BGASKET TO FIT SUNTECH, J, K PUMP COVERS1/32” Thick (Twice the Thickness of S-71)Packed 50/Package

S-71B is double the thickness of S-71. It is a more substantial gasket which is ideal for J & H pumps with imperfect sealing surfaces.

S-71ASAME AS ABOVE EXCEPT PACKED 12/HANGING BAG

SP-366LIP SEAL TO FITSUNTEC J PUMPReplaces: 135272(RS-1035)

SP-332SEAL ASSEMBLY (FACE SEAL)TO FIT SUNTEC J, H, K, S1 PUMPSReplaces: 100319-HK(RS-900)Packed with SP-332W washer.

SP-332WSTEEL WASHER FORJ PUMP FACE SEALReplaces: 101861(RS-911)

ACTUAL SIZE: � 5/�6” OD X �” ID

ACTUAL SIZE: 3 �/�” OD

SP-355SEAL POLISH PAPER7/16” HoleDimensions: 1” x 18”(RS-977)

SP-355ASEAL POLISH PAPER5/16” HoleDimensions: 1” x 18”(RS-978)

SP-3521/8” BY-PASS PLUGTO FIT J, H, K, S1 PUMPSAlso Fits WebsterReplaces: 24800(RS-919)

SP-354VALVE DISC TO FITSUNTEC J PUMPPISTON ASSEMBLY(RS-912)

S-67O-RING TO FITSUNTEC J & H PUMPSFor Piston SleeveReplaces: 25815(RS-902)

SHOWN ACTUAL SIZE

S-78END PLUG GASKET TO FIT SUNTECJ, H, S1 PUMPSReplaces: 100901(GS-131)

ACTUAL SIZE: � 3/�6” OD X �” ID

SSC-115“K” STRAINER TO FIT SUNTEC H PUMPNot for gear set with 6 screws.Replaces: 131066(RS-945)

BAGGED WITH S-7� GASKET

face seal to fit J PuMP


s-71 in douBle thickness

SSC-117“P” STRAINER TO FITSUNTEC H PUMPSame dimension as J pump strainer excepthigh capacity.Replaces: 135722BOXED WITH S-7� GASKET


PARTS TO FIT SUNTEC AND WEBSTER

GASKETS AND PARTS TO FIT WEBSTER

W-83FRONT COVER GASKETTO FIT WEBSTER M PUMP(GW-103)

W-86STRAINER & VALVE COVERGASKET TO FIT WEBSTERReplaces: P18Q18(GW-114)ACTUAL SIZE: � �/4” X � �/�6”

W-85VALVE COVER GASKETTO FIT WEBSTERReplaces: P18Q12(GW-109)

W-87STRAINER COVERGASKET TO FIT WEBSTERReplaces: P18T3(GW-107)

ACTUAL SIZE: � 5/�6” X � �/8”

ACTUAL SIZE: � 5/�6” X � �/8”

W-84FRONT COVER GASKETTO FIT WEBSTER R PUMP1R SeriesReplaces: 19871(GW-100)

W-83ASAME AS ABOVE EXCEPTPACKED 12/HANGING BAG


ACTUAL SIZE: 3” X 3 5/�6”

ACTUAL SIZE: 3 �5/�6” X 3 7/�6”



W-101FRONT COVER GASKETTO FIT WEBSTERReplaces: P18T1(GW-113)ACTUAL SIZE: 4 7/�6” X 4 �/8”

S-73ANTI-HUM DIAPHRAGMTO FIT SUNTECReplaces: 101511(GS-133)

S-76PORT HOUSING GASKETTO FIT SUNTECReplaces: 113331(GS-137)ACTUAL SIZE: � 3/8” OD

S-76APORT HOUSING GASKETTO FIT SID HARVEY RJPReversal J Pump

ACTUAL SIZE: � 3/8” OD

MISCELLANEOUS PARTS AND GASKETS TO FIT SUNTEC

S-72COVER GASKET TO FITSUNTEC LSIL, SLIR,S-1, S-2, R-3, R-4 PUMPSReplaces: 100961(GS-130)Packed 50/Box


ACTUAL SIZE: 3 �/4” ODX � 3/8” ID

S-65ANTI-HUM DIAPHRAGM(GS-138)

ACTUAL SIZE: � �5/�6” OD

S-77PORT HOUSING GASKETTO FIT SUNTEC HEAVYOIL PUMPACTUAL SIZE: � 3/8” OD

ACTUAL SIZE: 3 �/4” OD

SHOWN ACTUAL SIZE

S-80END CAP NUT GASKETTO FIT SUNTECReplaces: 100371(GS-134)

SSC-118STRAINER TO FIT SUNTEC LEVITT R-3 PUMP1 3/8” High



PARTS TO FIT WEBSTER

W-81STRAINER & VALVE SEATGASKET TO FIT WEBSTERReplaces: P18Q3(GW-110)

ACTUAL SIZE: � 7/�6” OD X � �/4” ID

W-82SEAL BELLOWS GASKETTO FIT WEBSTERReplaces: P18Q1(GW-111)

ACTUAL SIZE: � �/4” OD X 3/4” ID

W-88VALVE GASKET TO FITWEBSTER 1R SERIESReplaces: 21204(GW-104 / GW-120)

ACTUAL SIZE: �3/�6” OD X 9/�6” ID

WP-247SEAL BELLOWS ASSEMBLYTO FIT WEBSTER Q PUMPReplaces: A30Q4-3(RW-602)

WP-2491/4” NOZZLE PORT TOFIT WEBSTER Q PUMPAlso called valve andplug assembly.(RW-626)

WP-250STRAINER AND SPRINGTO FIT WEBSTER T PUMP(RW-629)

SP-337BRASS BLEEDER VALVE TO FIT WEBSTER PUMPSUse with vinyltubing #OP-370.(RS-986)

OP-370PLASTIC DRAIN HOSEFOR FUEL UNIT DRAINAGE10” Long



WP-207SEAL DIAPHRAGM TOFIT WEBSTER M PUMPReplaces: 42561-1(RW-631)

WP-208SEAL DIAPHRAGM TOFIT WEBSTER R PUMPReplaces: 39435-1(RW-640)

WP-219SEAL KIT TOFIT WEBSTERReplaces: 41466(RW-674)

WP-221SEAL SPRING TO FITWEBSTER R PUMPReplaces: 32672-1

WP-212OIL SEAL TO FITWEBSTER R PUMPReplaces: 44161(RW-668)

WP-228OIL SEAL TO FITWEBSTER M PUMPReplaces: 47986(RW-654)

WP-220PISTON GUIDE TO FITWEBSTER R PUMPNo SlotReplaces: 25122-1(RW-622)

WP-224PISTON TO FITWEBSTER M & R PUMPSReplaces: 25121-5(RW-649)

SP-334FUEL UNIT BLEEDER WRENCHIncludes plastic drain hose.


PARTS TO FIT WEBSTER

WP-214DRIVE SHAFT TO FIT WEBSTER M34 PUMPReplaces: 48061(RW-669)

WP-215DRIVE SHAFT TO FIT WEBSTERM17 PUMPReplaces: 48062(RW-670)

WP-241DRIVE SHAFTTO FIT WEBSTER2M34 PUMPReplaces: 48150-2

WP-206RETAINING RINGTO FIT WEBSTERReplaces: 29641-87(RW-667)

WP-242SHAFT RETAININGRING TO FIT WEBSTERR PUMPReplaces: 29650-24



WP-2093/8” GEAR SETTO FIT WEBSTERReplaces: 49488-3(RW-664)

WP-2251/8” GEAR SETTO FIT WEBSTERFor all M34 and2M34-15 pumps.Replaces: 49490-1(RW-645)

WP-2261/4” GEAR SET TO FIT WEBSTERFor all M17-6 & -15and 2M17-15 pumps.Replaces: 49490-3(RW-646)

WP-2343/32” GEAR SET TO FITWEBSTER M PUMPReplaces: 49490

WP-216CONVERSION KIT TO FITWEBSTER M-17 PUMPReplaces: 47923-1(RW-671)



WP-2391/2” GEAR SETTO FIT WEBSTERReplaces: 49488-4

WP-2403/4” GEAR SET TO FIT WEBSTERReplaces: 49488-5

WP-2443/8” GEAR SET TO FIT WEBSTERReplaces: 49488-3

WP-2171/8” GEAR SETTO FIT WEBSTERHardenedReplaces: 49489

WP-2183/16” GEAR SETTO FIT WEBSTERHardenedReplaces: 49489-1

WP-2371/8” GEAR PLATETO FIT WEBSTERReplaces: 19859-5

WP-2383/32” GEAR PLATETO FIT WEBSTERReplaces: 42639

WP-2433/8” GEAR PLATETO FIT WEBSTERReplaces: 25082-3

WP-233CLEANER SPACER TOFIT WEBSTER M PUMPReplaces: 19867(RW-662)

WP-222CLEANER BLADE TO FITWEBSTER R PUMPReplaces: 49230(RW-650)

WP-230CLEANER BLADE ADD ONTO FIT WEBSTER R PUMPReplaces: 25086

WP-223CLEANER BLADE TO FITWEBSTER M PUMPReplaces: 47776


PARTS TO FIT RIELLO AND DANFOSS

WP-231PUMP LABELTO FIT WEBSTERSingle StageReplaces: 49205-3

WP-235PUMP LABELTO FIT WEBSTERSingle StageReplaces: 49579-2

WP-245PUMP LABELTO FIT WEBSTERTwo StageReplaces: 49579-4

WP-232PUMP LABELTO FIT WEBSTERTwo StageReplaces: 49205-7(RW-661)

PARTS TO FIT RIELLO

SSC-126STRAINER TO FIT RIELLOFor Mectron Series -3, 5, 10, 15 and 20Replaces: 3005719(O-ring and gasket not included)

SSC-126GSTRAINER TO FIT RIELLOBOXED WITH O-RING (R-64) AND GASKET (R-64A)For Mectron Series - 3, 5, 10, 15 and 20Replaces: 3005719

R-64O-RING TO FIT RIELLOFUEL PUMP COVERFor Mectron SeriesReplaces: 3007162


R-64-12SAME AS ABOVE EXCEPTPACKED 12/HANGING BAG

R-64AGASKET TO FIT RIELLOFUEL PUMP COVERReplaces O-ringFor Mectron SeriesPacked 50/Bundle

R-64A-12SAME AS ABOVE EXCEPTPACKED 12/HANGING BAG

ACTUAL SIZE: � �/�” X � �/�”

R-68LARGE PUMP PLUNGER O-RING TO FIT RIELLO FUEL PUMPReplaces: 3007029SHOWN ACTUAL SIZE

R-69SMALL PUMP PLUNGERO-RING TO FIT RIELLOFUEL PUMPReplaces: 3007156

SHOWN ACTUAL SIZE

R-264BLAST TUBE GASKETTO FIT RIELLO BURNERFits All Models

ACTUAL SIZE: 5 �/4” X 5 �/4”

STRAINERS & O-RINGS TO FIT DANFOSS

D-19O-RING TO FIT DANFOSS BFP PUMP STRAINER COVERFor Pump #071N1151New Style Pump(2-Bolt Cover)Replaces: 633B0090

D-19ASAME AS ABOVE EXCEPTPACKED 12/HANGING BAG


SP-349BY-PASS PLUG TO FIT RIELLO PUMPSTakes 2.5mm Hex Key

SSC-127STRAINER KIT TO FIT DANFOSS BFP FUEL PUMPSNew Style Pumps(2-Bolt Cover)Replaces: 071N1392BOXED WITH COVER

O-RING (D-�9)

Note: The SSC-127 also fits the Beckett Clean Cut Pump.

If you would like to see a life-sized illustration of many of the gaskets listed in this catalog, please contact us and we’ll send you our Gasket Picture Posters for free. The two posters we offer measure �4” x 36”.


PARTS TO FIT DANFOSS AND HONEYWELL

SSC-128STRAINER KITTO FIT DANFOSS CFP FUEL PUMPSOld Style Pumps(4-Bolt Cover)Replaces: 071H0015


D-18O-RING TO FIT DANFOSSCFP PUMP STRAINER COVEROld Style Pump(4-Bolt Cover)Replaces: 633B1463

D-18ASAME AS ABOVE EXCEPTPACKED 12/HANGING BAG

ACTUAL SIZE: � 3/4” OD X � 5/8” ID

GASKET TO FIT COMBU & HAGO / DELTA PUMP

C-197GASKET TO FIT COMBUAND HAGO/DELTA OIL PUMPFor Combu Pump #CV2RRACTUAL SIZE: � �/�” X � �/�”

GASKETS TO FIT WINKLER AND STEWART WARNER

W-279AGASKET TO FIT WINKLER,STEWART WARNERPUMP STRAINER COVERReplaces: 170468(GM-121)ACTUAL SIZE: 3 �/4” OD

X � 9/�6” ID

W-279BGASKET TO FIT WINKLER,STEWART WARNERLIFT PUMP(GM-122)ACTUAL SIZE: 3 9/�6” OD

X � �/�” ID

U-600“U” ELEMENT FORSTACK RELAYWith ScrewsReplaces: 36486(RM-809)

H-599BAR RESET (LEVER) TOFIT HONEYWELL RA-117STACK RELAY(RM-822)

H-598RED CONTROL COVERBUTTON TO FIT HONEYWELLR8182 / R8184

H-598ARED CONTROL COVERBUTTON TO FIT HONEYWELLR8184

CC-602CAD CELL EYE(FLAME DETECTOR)For use in Honeywell 630485.Old StyleBubble Packed

PARTS TO FIT HONEYWELL

CC-601CAD CELL EYE (FLAME DETECTOR)For use in Honeywell C554A.Replaces: 130367Bubble Packed

H-597UNION CONNECTION GASKET TO FIT HONEYWELL/SPARCO MIXING VALVEACTUAL SIZE: � 3/8” ID

X �” OD

If we are missing the part you need, let us know and we’ll tool up for it.

See page 56 for our complete line of Immersion Wells to fit Honeywell.

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900�0

OIL FILTER GASKETS

GASKETS TO FIT FULFLO FILTERS

GASKETS TO FIT GENERAL FILTERS

G-90GASKET TO FITGENERAL 1A25A COVERBlack Rubber (Buna-N)(GF-213)ACTUAL SIZE: 3 7/�6” OD

X � 7/8” ID

G-100GASKET TO FIT COVER FORGENERAL FILTER 2A-700AAND EQUALSBlack Rubber (Buna-N)Replaces: 2A-705ACTUAL SIZE: 4 �/8” OD

X 3 �/�” ID

G-103SQUARE CUT BOTTOMGASKET TO FIT GENERALFILTER 2A-710SLBlack Rubber (Buna-N)Goes in GK-1 kit.

G-104TOP GASKET TO FITGENERAL FILTER 2A-710SLCork-Goes in GK-1 kit.ACTUAL SIZE: � 5/8” OD

X �5/�6” ID

G-29GASKET KIT TO FITGENERAL 2A-700AFILTERS AND EQUALSContains:1 G-100 Cover Gasket1 G-91 Vent Screw Gasket1 G-92 Cover Nut Gasket

G-30GASKET KIT TO FITGENERAL 1A-25AFILTERS AND EQUALSContains:1 G-90 Cover Gasket1 G-91 Vent Screw Gasket1 G-92 Cover Nut Gasket

ACTUAL SIZE: 3 3/8” OD X 3 �/�6” ID

G-91GASKET TO FIT GENERALFILTER AIR BLEEDER SCREW(GF-221)SHOWN ACTUAL SIZE

G-92GASKET TO FIT GENERALFILTER HEX COVER NUT(GF-214)

SHOWN ACTUAL SIZE

G-29AGASKET KIT TO FIT GENERAL 2A-710SL FILTERReplaces: GK-1 KitContains:1 G-100 Cover Gasket1 G-91 Vent Screw Gasket1 G-92 Cover Nut Gasket1 G-104 Top Gasket1 G-103 Square Cut Bottom Gasket

Gk-1 kit

F-95GASKET TO FIT FULFLOFB4, 6, 8, 10 COVERBlack Rubber (Buna-N)Replaces: 31300(GF-200)Packed 30/Box

ACTUAL SIZE: 4 �/�6” OD X 3 3/8” ID

F-97GASKET TO FIT HEXCOVER NUT FOR FULFLOFB4, 6, 8, 10 FILTERSReplaces: 32014(GF-216)

SHOWN ACTUAL SIZE

F-96GASKET TO FIT VENTSCREW FOR FULFLOFB4, 6, 8, 10 FILTERSReplaces: 32015SHOWN ACTUAL SIZE

F-31GASKET KIT TO FITFULFLO FB4, 6, 8, 10FILTERS AND EQUALSContains:1 F-95 Cover Gasket1 F-96 Vent Screw Gasket1 F-97 Cover Nut Gasket

F-99GASKET TO FITFULFLO FB3 COVERBlack Rubber (Buna-N)(K-1649)ACTUAL SIZE: � 5/8” OD

X � �/8” ID

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900 ��

MISCELLANEOUS OIL GASKETS

G.I. CAN GASKET SET

K-202G.I. CAN GASKETSet of 2Black Rubber (Buna-N)ACTUAL SIZE: 3 3/8” OD

X � �/4” ID

FILL BOX GASKET

G-263FILL BOX GASKETLeather

ACTUAL SIZE: 3 �/8” OD X � 3/8” ID

O-RING TO FIT PHILLY FILL CAP

G-263AO-RING TO FIT PHILLY CAP ON FILL BOXACTUAL SIZE: � 7/8” OD

X � �/�” ID

GASKETS TO FIT KRAISSEL

K-132GASKET TO FIT KRAISSELBODY/STRAINERFits 1” CoverACTUAL SIZE: 3 3/�6” OD

X � 5/8” ID

K-132AGASKET TO FIT KRAISSELBODY/STRAINERFits 1/2” CoverACTUAL SIZE: � �/4” OD

X � 3/4” ID

K-131GASKET TO FIT KRAISSELBODY/STRAINERFits both 1 1/4” and 1 1/2” covers.ACTUAL SIZE: 3 �5/�6” OD

X 3 �/4” ID

K-130GASKET TO FIT KRAISSELBODY/STRAINERFits both 2” and 2 1/2” covers.ACTUAL SIZE: 4 �3/�6” OD

X 4 �/8” ID

F-32GASKET KIT TO FITFIROMATIC RC-20AND RC-30 FILTERSContains:1 F-94 Cover Gasket1 F-93 Plastic Bolt Washer

GASKET TO FIT PUROLATOR / CUNO FILTERS

F-98GASKET TO FIT PUROLATOR /CUNO COVERSBlack Rubber (Buna-N)(GF-215)ACTUAL SIZE: 3 3/�6” OD

X 3 �/4” ID

GASKETS TO FIT FIROMATIC FILTERS

F-94GASKET TO FIT FIROMATICRC-20, RC-30 COVERSBlack Rubber (Buna-N)ACTUAL SIZE: 4 �/�6” OD

X 3 3/8” ID

F-93AGASKET TO FITFIROMATIC VENT SCREW

F-93PLASTIC WASHER TO FITFIROMATIC RC-20, RC-30For Top ScrewACTUAL SIZE: 7/8” OD

X 7/�6” ID

ACTUAL SIZE: �/�” OD X �/8” ID

VACUUM GAUGE ADAPTER FITTINGS FOR OIL FILTERS

These adapter fittings make it easy to test for a vacuum reading on oil filter cans. Replace the top bolt on the cans with these fittings and then attach a vacuum gauge to get a reading. Available for all of the popular filters.

SSC# FITS THIS OIL FILTER�08030�0803��08034�08036�08040

GENERAL �A�5AGENERAL �A700

FULFLO FB4, FB6, FB8, FB�0FIROMATIC RC-40, RC-30

GAR-BER SPIN ON

�08030 �0803�

�08034 �08036

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900��

K-130AGASKET TO FIT KRAISSELBODY/STRAINERFits 3” CoverACTUAL SIZE: 5 ��/�6” OD

X 5 �/8” ID

K-131RO-RING TO FIT KRAISSEL Buna-N RubberACTUAL SIZE: 5 3/8” OD

X 5 �/8” ID

GASKETS TO FIT PETRO

P-135GASKET TO FIT PETRO1” STRAINER COVERReplaces: 126260ACTUAL SIZE: 3 �/8” OD

X � 5/�6” ID

P-134GASKET TO FIT PETRO1 1/2” STRAINER COVERReplaces: 126261ACTUAL SIZE: 4 �/4” OD

X 3 9/�6” ID

P-133GASKET TO FIT PETRO2” STRAINER COVERReplaces: 125502ACTUAL SIZE: 5 �/8” OD

X 4 �/8” ID

P-133AGASKET TO FIT PETRO2 1/2” STRAINER COVER

ACTUAL SIZE: 6 �/�6” OD X 5 �/8” ID

O-RINGS TO FIT HAYWOOD

H-143O-RING TO FIT HAYWOODLARGE STRAINERACTUAL SIZE: 3 9/�6” OD

X 3 �/4” ID

H-144O-RING TO FIT HAYWOODSMALL STRAINERACTUAL SIZE: � �3/�6” OD

X � 9/�6” ID

GASKETS AND SIGHT GLASSES TO FIT CLEAVER BROOKS

C-139INNER GASKET TO FITCLEAVER BROOKSThickness: 1/32”

ACTUAL SIZE: � 5/8” X � 7/�6”

C-140OUTER GASKET TO FITCLEAVER BROOKSThickness: 1/32”

ACTUAL SIZE: � 5/8” X � 3/4”

C-139EINNER GASKET TO FITCLEAVER BROOKSThickness: 1/64”

C-140EOUTER GASKET TO FITCLEAVER BROOKSThickness: 1/64”

C-139AOIL WICK TO FIT CLEAVER BROOKS AIR PISTON MODULATORACTUAL SIZE: � �3/�6” OD

X � 7/�6” ID

C-141GASKET TO FITCLEAVER BROOKSLARGE SIGHT GLASSAlso for IndustrialCombustion.

ACTUAL SIZE: 4 5/8” X � �/�”

SG-5098 HOLE SIGHT GLASS TO FIT CLEAVER BROOKSLUBE TANKUses C-141 Gasket

C-138GASKET TO FITCLEAVER BROOKSSMALL SIGHT GLASSACTUAL SIZE: 3 9/�6” X � �/�”

SG-5086 HOLE SIGHT GLASSTO FIT CLEAVER BROOKSLUBE TANKUses C-138 Gasket


H-143AO-RING TO FIT HAYWOODLARGER STRAINERACTUAL SIZE: 4 �/4” OD

X 4” ID

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900 �3

I-145GASKET/SHIM TO FITCLEAVER BROOKSMETERING PUMPAlso for Industrial Combustion.Thickness: 1/32”

I-145CGASKET/SHIM TO FITCLEAVER BROOKSMETERING PUMPAlso for Industrial Combustion.Thickness: 1/64”

ACTUAL SIZE: 4” OD X � 7/8” ID

C-203ASHIM GASKET TO FITCLEAVER BROOKSMETERING PUMPFRONT AND BACKThickness: .002”

C-203BSHIM GASKET TO FITCLEAVER BROOKSMETERING PUMPFRONT AND BACKThickness: .004”

C-203CSHIM GASKET TO FITCLEAVER BROOKSMETERING PUMPFRONT AND BACKThickness: .006”

ACTUAL SIZE: 3 3/4” OD X � 3/4” ID

GASKETS TO FIT JOHNSON

J-137GASKET TO FITJOHNSON PUMP

J-136GASKET TO FITJOHNSONACTUAL SIZE: 4 3/8” OD

X 3 �3/�6” ID

ACTUAL SIZE: 4 5/8” X 4 5/8”

GASKETS TO FIT VIKING

V-204AGASKET TO FIT VIKING 1” STRAIGHTPUMP COVERG-432Thickness: .002”

V-204BGASKET TO FITVIKING 1” STRAIGHTPUMP COVERG-432Thickness: .003”

V-204CGASKET TO FITVIKING 1” STRAIGHTPUMP COVERG-432Thickness: .004”

V-204DGASKET TO FITVIKING 1” STRAIGHTPUMP COVERG-432Thickness: .005”

V-204EGASKET TO FITVIKING 1” STRAIGHTPUMP COVERG-432Thickness: .006”

ACTUAL SIZE: 3 3/8” OD X � �/�” ID

V-259AGASKET TO FITVIKING 1” ANGLEPUMP COVERH-432Thickness: .002”

V-259BGASKET TO FITVIKING 1” ANGLEPUMP COVERH-432Thickness: .003”

V-259CGASKET TO FITVIKING 1” ANGLEPUMP COVERH-432Thickness: .004”

V-259DGASKET TO FITVIKING 1” ANGLEPUMP COVERH-432Thickness: .005”

V-259EGASKET TO FITVIKING 1” ANGLEPUMP COVERH-432Thickness: .006”

ACTUAL SIZE: 4 �3/�6” ODX 3 7/�6” ID

GASKETS AND SIGHT GLASSES TO FIT INDUSTRIAL COMBUSTION

C-141GASKET TO FIT INDUSTRIALCOMBUSTION 8 HOLES LUB.Also fits Cleaver Brooks.ACTUAL SIZE: 4 5/8” X � �/�”

SG-5098 HOLE SIGHT GLASSTO FIT INDUSTRIALCOMBUSTIONAlso fits Cleaver Brooks.


I-145DGASKET/SHIM TO FIT INDUSTRIAL COMBUSTION/CLEAVER BROOKS AIR COMPRESSORFits 2”, 2 3/4” & 5”Thickness: .002”

ACTUAL SIZE: 7 �/4” ODX 5 �/�” ID

SSC offers over �50 different Pressure, Compound, Vacuum, Liquid Filled and Water Test Gauges. We have a wide selection at competitive prices. See pages 73-77.



SG-515SIGHT GLASS TO FITINDUSTRIAL COMBUSTIONM.E. BLAST TUBEACTUAL SIZE: � �/�” X 4”

I-145GASKET/SHIM TO FIT INDUSTRIAL COMBUSTIONOIL METERING PUMPAlso for Cleaver Brooks.Thickness: 1/32”

I-145CGASKET/SHIM TO FITINDUSTRIAL COMBUSTIONOIL METERING PUMPAlso for Cleaver Brooks.Thickness: 1/64”

ACTUAL SIZE: 4” OD X � 7/8” ID

I-145AINNER SEAT O-RINGTO FIT INDUSTRIALCOMBUSTIONACTUAL SIZE: � 5/8” OD

X � �/�” ID

I-145BINNER SEAL O-RINGTO FIT INDUSTRIAL COMBUSTION AIR ANDOIL METERING PUMP

SHOWN ACTUAL SIZE

I-179GASKET TO FITINDUSTRIAL COMBUSTIONMETERING PUMPThickness: 1/64”

I-179AGASKET TO FITINDUSTRIAL COMBUSTIONMETERING PUMPThickness: 1/32”

ACTUAL SIZE: 3 �/�6” OD

I-145EGASKET/SHIM TO FIT INDUSTRIAL COMBUSTION AIR COMPRESSORFits Model 7-SThickness: .002”

ACTUAL SIZE: 5 �/4” OD X 3 3/8” ID

I-145DGASKET/SHIM TO FIT INDUSTRIAL COMBUSTION/CLEAVER BROOKS AIR COMPRESSORFits 2”, 2 3/4” & 5”Thickness: .002”

ACTUAL SIZE: 7 �/4” ODX 5 �/�” ID

GASKET TO FIT WARREN

W-142GASKET TO FITWARREN PRE-HEATERACTUAL SIZE: 4 9/�6” OD

X 3 �/4” ID

M-195GASKET TO FIT RAYVISCO BOX HEADACTUAL SIZE: 9 �/�” X 4 3/8”

GASKET TO FIT RAY VISCO

GASKET FOR SOLENOID VALVE

P-153GASKET TO FITSOLENOID VALVEACTUAL SIZE: 3 �/4” OD

X � �/�” ID

GASKETS TO FIT MONITOR HEATERS

M-292ABURNER CLOTH GASKETTO FIT MONITOR M422Replaces: 6113ACTUAL SIZE: 4 �/8” OD

M-292BSTRAINER GASKETTO FIT MONITOR M422Replaces: 6189ACTUAL SIZE: � �/4” X 7/8”

M-292CGASKET TO FITMONITOR M422 & M441Replaces: 6115ACTUAL SIZE: � �/8” OD

X ��/�6” ID

M-292DWINDOW FLAME GASKETTO FIT MONITOR M422 & M441Replaces: 6125ACTUAL SIZE: � ��/�6” X � �/8”

M-292EWINDOW GASKET TO FIT MONITOR M422 & M441Replaces: 6124ACTUAL SIZE: � �/8” X � 7/�6”


GASKETS TO FIT MONITOR / HALLMARK

M-292FPLUG PACKING TO FITMONITOR M422 & M441Replaces: 6119ACTUAL SIZE: � 9/�6” X 9/�6”

M-292GGASKET TO FITMONITOR M422Replaces: 6112ACTUAL SIZE: 4 �/8” OD

M-292HHEATER COVER PACKINGTO FIT MONITOR M422Replaces: 6117ACTUAL SIZE: 3 �/�6” OD

X � 5/8” ID

M-292IGASKET TO FITMONITOR M422Replaces: 6114ACTUAL SIZE: 5 3/8” OD

X 4 �/�” ID

M-292JWINDOW BASE GASKETTO FIT MONITOR M422Replaces: 6126ACTUAL SIZE: 5” X 3 3/8”

M-292KCHAMBER GASKETTO FIT MONITOR M422Replaces: 6130ACTUAL SIZE: 6 ��/�6” OD

X 5 5/�6” ID

M-292LGASKET TO FITMONITOR M422Replaces: 6120ACTUAL SIZE: 6” X 4 5/�6”

M-292MBURNER CLOTH GASKETTO FIT MONITOR M441Replaces: 6363ACTUAL SIZE: 4 �/�6” X 3 �/8”

M-292NSTRAINER GASKETTO FIT MONITOR M441Replaces: 6344ACTUAL SIZE: � 9/�6” X � �/�6”

M-292PWINDOW BASE GASKETTO FIT MONITOR M441Replaces: 6350ACTUAL SIZE: 7 3/8” X 5 �/8”

M-292QGASKET TO FITMONITOR M441Replaces: 6313ACTUAL SIZE: 6 ��/�6” X 5 �/�”

M-292RHEATER COVER PACKING GASKETTO FIT MONITOR M441Replaces: 6354ACTUAL SIZE: 3 �/4” OD X �” ID

M-292TGASKET TO FITMONITOR M441Replaces: 6357


M-292UCHAMBER GASKETTO FIT MONITOR M441Replaces: 6317ACTUAL SIZE: 8 3/8” OD

X 7 �/�6” ID

GASKETS AND KIT TO FIT HALLMARK FURNACES

108402SMALL FLUE COLLAR/HOT PLATE GASKET TO FIT HALLMARK FURNACESFits 6” Flue

6” flue Gasket kit

ACTUAL SIZE: 8” OD X6” ID

108404CONNECTING GASKETTO FIT HALLMARK FURNACESStraight PieceACTUAL SIZE: ��” X � �/4”

108406J GASKET TO FITHALLMARK FURNACESACTUAL SIZE: 9” LONG

108408LARGE FLUE COLLAR/HOT PLATE GASKET TO FIT HALLMARK FURNACES8” FlueACTUAL SIZE: �0” OD

X 8” ID

1084206” GASKET SET TO FITHALLMARK FURNACESKit Contains: 2 - 108402,1 - 108404, 2 - 108406PACKED IN A PLASTIC BAG

8” Flue Gasket Kit on next page.


BURNER FLANGE GASKETS

UNIVERSAL BURNER FLANGE GASKET

U-268UNIVERSAL BURNERFLANGE GASKETNO HOLES

ACTUAL SIZE: 8” OD X 4” ID

GASKET TO FIT HEIL, BRAD, OLSEN

H-267GASKET TO FIT HEIL,BRAD, OLSEN COVERSFits All Burner ModelsACTUAL SIZE: 3” OD

X �” ID

GASKET TO FIT G.E. DOOR

G-266GASKET TO FIT G.E. DOORFits All Burner Models

ACTUAL SIZE: �0” OD X 8” ID

GASKET TO FIT RIELLO BURNER

R-264GASKET TO FIT RIELLOBURNER BLAST TUBEFits All Models

ACTUAL SIZE: 5 �/4” X 5 �/4”

GASKETS TO FIT THERMO PRIDE

T-265GASKET TO FIT THERMOPRIDE COVERFits All Burner ModelsACTUAL SIZE: 4” OD

X 3/8” ID

T-265AGASKET WITH EXTRASLOT TO FIT THERMOPRIDE COVERACTUAL SIZE: 4” OD

X 3/8” ID

GASKETS TO FIT WAYNE BURNERS

W-276GASKET TO FITWAYNE EH, EASRAND EHA FLANGEACTUAL SIZE: 7 3/8” OD

X 5 5/�6” ID

W-277GASKET TO FIT WAYNEMRS FLANGEACTUAL SIZE: 5 �/�” OD

X 4 5/�6” ID

W-278GASKET TO FIT WAYNE HS, HSR AND HSG FLANGE

ACTUAL SIZE: 7 �/�” OD X 4” ID

1084308” GASKET SET TO FITHALLMARK FURNACESKit Contains: 2 - 108408, 1 - 108404, 2 - 108406

8” flue Gasket kit

CLEANOUT GASKET TO FITYORK FURNACES

Y-819CLEANOUT GASKET TO FIT YORK FURNACES Replaces: 028-10709-000ACTUAL SIZE: � �/�” OD

X �” ID

CLEANOUT GASKET TO FITINTER-CITY (ICP)

I-820CLEANOUT GASKET TO INTER-CITY (ICP)Replaces: 1149103ACTUAL SIZE: � 3/4” OD

X � �/8” IDIf you would like to see a life-sized illustration of many of the gaskets listed in this catalog, please contact us and we’ll send you our Gasket Picture Posters for free. The two posters we offer measure �4” x 36”.


PARTS TO FIT CARLIN / BECKETT

GASKETS TO FIT CARLIN BURNERS

C-150GASKET TO FIT CARLINCRD 99/100, EZ1BURNER FLANGEWill Fit Wayne EACTUAL SIZE: 8 5/�6” OD

X 4 3/�6” ID

C-269GASKET TO FITCARLIN 1150 FLANGE

ACTUAL SIZE: ��” OD X �0” ID

C-270GASKET TO FITCARLIN 1050 FLANGE

ACTUAL SIZE: ��” ODX 8 3/4” ID

C-271GASKET TO FIT CARLIN801 PRESSURE FIREDFLANGEACTUAL SIZE: ��” OD

X 5 �/4” ID

C-272GASKET TO FIT CARLIN301, 501, 601 AND 701PRESSURE FIRED FLANGEACTUAL SIZE: �0” OD

X 4 �/8” ID

C-273GASKET TO FIT CARLIN801 STANDARD FLANGE

ACTUAL SIZE: 8 �/�” ODX 5 �/4” ID

C-274GASKET TO FIT CARLIN201, 301, 501, 601 AND701 STANDARD FLANGEACTUAL SIZE: 8 �/�” OD

X 4 �/8” ID

GASKETS AND PARTS TO FIT BECKETT

B-187GASKET TO FIT BECKETT #68 OEM BURNER FLANGE

ACTUAL SIZE: 6 5/�6” X 6 5/�6”

T-262GASKET KIT TO FITBECKETT AFGTRANSFORMERKit Contains T-260 & T-261Replaces: 51304PACKED IN A PLASTIC BAG

T-260GASKET TO FIT BECKETTAFG TRANSFORMERWIRING COMPReplaces: 31519 ACTUAL SIZE: 4 �/�6” X 3 7/�6”

T-261GASKET TO FIT BECKETTAFG TRANSFORMERReplaces: 31520ACTUAL SIZE: 3 3/4” X �”

BF-521FITTING TO FIT BECKETTAF SERIES NOZZLE LINEIncludes Nut(P127-12)

BC-661COUPLING TO FITBECKETT AFReplaces: 2454

B-15GASKET TO FIT BECKETTBURNER FLANGEWill also fit Aero, Ducane, York and Trane.Replaces: 3616

ACTUAL SIZE: 8 �/�” ODX 3 5/�6” ID

SSC-127STRAINER KIT TO FIT BECKETT CLEAN-CUT PUMP


strainer to fit Beckett clean cut PuMP

This also fits the Danfoss BFP Pump

Try out our High Temperature Rope and Knit Tape for insulation and packing of boilers, furnaces, wood stoves and other applications. See page �4 for more details.


GASKETS & FURNACE PADS TO FIT MILLER (MOBILE HOME BURNERS-OLD STYLE)

M-147GASKET TO FIT MILLERBURNER FLANGEReplaces: 3000010000ACTUAL SIZE: 6 �/�” OD

X 4 3/8” ID

M-148GASKET TO FIT MILLERBURNER PLATEReplaces: 301205000

ACTUAL SIZE: �5 �/�” X �0 �/4”

PARTS TO FIT MILLER FURNACES

MP-405OIL LINE PARTS KITTO FIT MILLERContains:1 3/16” TH x 11” L Copper Oil Line1 3/16” TH x 7” L Copper Oil Line1 Adapter Flare Reducer1 Fitting Elbow

M-149GASKET TO FITMILLER POUCHReplaces: 301181000

ACTUAL SIZE: �3 3/4” X �0”

M-186GASKET TO FITMILLER FLUEReplaces: 3011950000ACTUAL SIZE: 7 3/�6” OD

X 5 �/8” ID

M-185GASKET KIT TO FITMILLER-GUN MOBILEHOME FURNACEContains:1 M-147 Burner Gasket1 M-148 Burner Plate Gasket1 M-149 Pouch Gasket1 M-186 Flue Gasket

PACKED IN A PLASTIC BAG WITH LABEL

MFP-401FURNACE PAD TOFIT MILLERSize: 15 3/4” x 17 1/4”x 1/4” TH

MFP-402FURNACE PAD TOFIT MILLERSize: 15 3/4” x 26 1/4”x 1/4” TH

MFP-403FURNACE PAD MATERIALFOR USE ON MILLERSize: 15 3/4” x 9 ft. x 1/4” TH

SSC’s foam media pads will fit the most popular Miller Furnaces in the field.

SAVE MONEY BY CUTTING YOUR OWN SIZE!

GASKETS & FURNACE PAD TO FIT MILLER MI SERIES FURNACE

M-187AGASKET TO FIT MILLER MI SERIES FURNACE6 1/2” ODACTUAL SIZE: 6 �/�” OD

X 4 3/8” ID”

M-187BGASKET TO FIT MILLER MI SERIES FURNACE9 3/4” ODACTUAL SIZE: 9 3/4” OD

X 7 3/4” ID

M-187GASKET KIT TO FIT MILLER MI SERIES MOBILEHOME FURNACEReplaces: 730534Contains:1 M-187A 6 1/2” OD Gasket2 M-187B 9 3/4” OD Gasket1 M-187C 17” x 13” Gasket1 M-187D 2 1/2”x1 1/2” GasketPACKED IN A PLASTIC

BAG WITH LABEL

M-186AGASKET TO FITMILLER MSH FLANGEReplaces: 689505

ACTUAL SIZE: �� 3/�6” X 4 9/�6”


M-187CGASKET TO FIT MILLER MI SERIES FURNACE17” x 13”

ACTUAL SIZE: �7” X �3”

M-187DGASKET TO FIT MILLER MI SERIES FURNACE2 1/4” x 1 1/2” ACTUAL SIZE: � �/4” X � �/�”

MILLER M1 PADS / OIL LINES / CO2 TOOLS

COPPER OIL LINES (NOZZLE LINES)

SSC# DESCRIPTION OL-30� �/4” BRASS FLARE NUTOL-30� 3/�6” BRASS FLARE NUTOL-306 �/4” x ��” OIL LINE WITH FLARE NUTSOL-307 �/4” x �8” OIL LINE WITH FLARE NUTSOL-308 3/�6” x �8” OIL LINE WITH FLARE NUTSOL-309 3/�6” x ��” OIL LINE WITH FLARE NUTSOL-3�0 3/�6” x 8” OIL LINE WITH FLARE NUTSOL-3�� 3/�6” x 5” OIL LINE WITH FLARE NUTS

Our oil lines are made of annealed, soft copper with attached, flared fittings. All lines are packed in a plastic bag.

CO2 BLOWOUT GUNS

SSC-451CO2 BLOWOUT GUN

Use these guns for clearing plugged oil lines. They use standard CO2 charges.

CO2 BLOWOUT GUN CHARGES

SSC-450CO2 CHARGESPacked 10 cartridgesto a box.

SSC’s high pressure CO2 charges are used in blowout guns. They use high pressure to clear obstructions in fuel, hydraulic, or instrument transmission lines and pipes.

FLEXIBLE OIL LINES WITH STEEL BRAID FOR BOILER SWING DOORS

ul listed

- The Buna-N rubber lining (impervious to oil) is covered with a blue striped galvanized steel braid for protection- Supplied with an instruction/warranty label and a 1/4” adapter fitting that fits most burner fuel pumps- Successfully tested to UL 296-95- 5 year warranty

SSC# SIZE�08900�0890�

3/8” ID x �4” LONG3/8” ID x 36” LONG

MFP-404FURNACE PAD TOFIT MILLER M1Size: 20” x 28” x 1/4” THReplaces: 669064

Miller M1 furnace Pad

FLEXIBLE OIL LINE WITH STEEL BRAID TO FIT RIELLO BURNERS

108906FLEXIBLE OIL LINE TO FIT RIELLO BURNERS36” LongStainless steel braided cover.3/8” flare female swivelon both ends.

ul listed

3/8” ADAPTER FOR FLEXIBLE OIL LINES

1302203/8” FLARE MALE ADAPTERFOR FLEXIBLE OIL LINESTurns 1/4” ends to 3/8”.

�/4” x 3/8” REDUCING FLARE UNION

standard

With Built in safety ValVe

SSC-451ACO2 BLOWOUT GUN WITH BUILT IN SAFETY VALVE

O-10011REPLACEMENT O-RINGFOR BLOWOUT GUN

SHOWN ACTUAL SIZE

Tridicators and Thermometers are on page 77.


HAND PUMPUse this hand pump as an alternative to CO2 charges when blowing out lines. The center access port allows the Service Technician to install a compound gauge to monitor the system pressure and vacuum during operation. Compound Gauges can be found on page 74.

SSC-452HAND PUMPWith 1/8” NPT centeraccess port.

GAUGE NOT INCLUDED

DUPLEX TANK BUSHINGS WITH FITTINGS

SSC’s oil tank bushings are used to slip tubing into the oil tank and consist of 2” heavy cast iron hexagon shapes with brass connectors.

SSC# SIZE�0800��0800�

�” x 3/8”�” x �/�”

FLOATING SUCTION LINE FOR OIL TANKSThe Oventrop Floating Suction Kit is a device used for the supply of #1 and #2 heating oil and diesel fuel from any oil supply tank having a height of no more than 68”. It floats 1 1/2” below the surface of the top of the oil inside the tank, thus drawing clean oil into the heating system. It helps to prevent service problems due to dirty tank bottoms (sludge), cold (viscous) fuel and water in the fuel tank.

108005FLOATING SUCTION LINE FOR OIL TANKS

OIL TANK VALVES

SSC# DESCRIPTION�080�0�080��080�4

3/8” FLARE X �/�” MPT3/8” FLARE X 3/4” MPT�/�” FLARE X 3/4” MPT

SCHRADER VALVEThis bicycle type air valve allows the service technician to enter air into any system with a compressor or hand pump. It’s handy for pressure testing tanks, plumbing systems, heating systems, pipe, etc.

107140SCHRADER VALVE1/8” NPT

NOZZLE ADAPTERS

SHORT STANDARD LONG

SSC# TYPE SIZENA-700ANA-700BNA-70�ANA-70�BNA-70�ANA-70�B

SHORTSHORT

STANDARDSTANDARD

LONGLONG

�/8”�/4”�/8”�/4”�/8”�/4”

NOZZLE WRENCH

NW-705NOZZLE WRENCH

OIL BURNER SAFETY LABELS

These safety labels are used by service technicians to alert homeowners of the proper procedures to follow in case of burner failure. They are printed on fluorescent orange label stock which has high visibility. The peel-and-stick label stock is easily affixed to equipment.

IS-623INSTRUCTION STICKERFluorescent OrangePeel-and-Stick Label Stock

ACTUAL SIZE: 3 �/�” X � 3/4”

IS-624RESET STICKERFluorescent OrangePeel-and-Stick Label StockACTUAL SIZE: � 7/8” X �”

DUPLEX BUSHINGS / LABELS / HAND PUMP

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900 ��

OIL BURNER COUPLINGS

OIL BURNER COUPLINGS

SSC’s flexible Oil Burner Couplings offer tough neoprene sleeves (1” wide) with high density plastic end pieces. This combination gives you a strong, lightweight connector which is unaffected by most humidity, oil, temperature and chemical extremes. In addition, the molded end pieces require no set screws and the sleeve is easily cut for a proper installation every time.

carded and Boxed kits

BC-6495” COUPLING KITContains:1 5” Rubber Sleeve1 1/2” End Fitting (BC-690)1 7/16” End Fitting (BC-691)1 5/16” End Fitting (BC-692)Available Carded or Boxed

BC-6506” COUPLING KITContains:1 6” Rubber Sleeve (BC-685)1 1/2” End Fitting (BC-690)1 7/16” End Fitting (BC-691)1 5/16” End Fitting (BC-692)Available Carded or Boxed

BC-6526” COUPLING KIT WITHEXTRA FITTINGSContains:1 6” Rubber Sleeve (BC-685)2 1/2” End Fittings (BC-690)1 7/16” End Fitting (BC-691)2 5/16” End Fittings (BC-692)Available Carded or Boxed

BOXED

CARDED

12 Piece kit

BC-65312 PIECE COUPLING KITContains:12 6” Rubber Sleeves (BC-685)12 1/2” End Fittings (BC-690)12 5/16” End Fittings (BC-692) 5 7/16” End Fittings (BC-691) 5 Torrington Adapters (BC-693)Available Boxed

6-Pack

BC-654COUPLING 6-PACKContains:6 6” Couplings With Fittings

asseMBled (ready-to-use) couPlinGs

SSC# WILL FIT LENGTH/FITTING SIZE

BC-661COUPLING TO FIT BECKETT AFReplaces: 2454

BC-660BC-66�BC-66�BC-663BC-664BC-665BC-666BC-667BC-668BC-670BC-67�BC-67�BC-673

BECKETT (��90)BECKETT AF (�454)CARLIN 99-�00 (99RA�0�08)CARLIN CRD (99RA5��0)CARLIN CRDA (�0�0J)DUCANE (B�0��503)LENNOX (65A4�0�)WAYNE E (�3�79)WAYNE (�34�4) -- -- -- --

� 7/8”L/7/�6” X �/�”3 �3/3�”L/5/�6”X�/�”� 3/�6”L/5/�6” X �/�”3 �/�6”L/7/�6” X �/�”� 3/4”L/7/�6” X �/�”

3 �3/�6”L/5/�6”X�/�”3 5/8”L/5/�6” X �/�”4 5/�6”L/5/�6”X�/�”

3 �3/�6”L/5/�6”X�/�”4 7/�6”L/7/�6” X �/�”

4”L / 7/�6” X �/�”5 �/4”L/5/�6” X �/�”

6”L / 5/�6” X �/�”

couPlinG 10-Pack

BC-661KCOUPLING 10-PACKTO FIT BECKETT AFReplaces: 245410 couplings in a boxwith label.

BC-662KCOUPLING 10-PACKTO FIT CARLIN99RA1020810 couplings in a boxwith label.

sleeVe (tuBinG) lenGths

SSC# SLEEVE SIZEBC-685BC-686BC-687BC-688

6” LENGTH X �” WIDE��” LENGTH X �” WIDE�4” LENGTH X �” WIDE36” LENGTH X �” WIDE

couPlinG cutter

BC-695COUPLING CUTTER

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900��

CAD CELL EYES / JUMPERS / TERMINALS

couPlinG end fittinGs

BC-690COUPLING ENDFITTING1/2” Shaft SizeColor: BLACK

BC-691COUPLING ENDFITTING7/16” Shaft SizeColor: BLUE

BC-692COUPLING ENDFITTING5/16” Shaft SizeColor: RED

BC-693TORRINGTONADAPTER

1/2” - BLACK 7/16” - BLUE

5/16” - RED

ELECTRICAL JUMPERS (TEST LEADS)

SSC# DESCRIPTION LENGTHEJ-609EJ-6�0EJ-6��EJ-6�4EJ-6�5EJ-6�6AC-6�7AC-6�7INBAC-6�7INR

STANDARD JUMPERS-PAIRSTANDARD JUMPERS-PAIRSTANDARD JUMPERS-PAIRINSULATED JUMPERS-PAIRINSULATED JUMPERS-PAIRINSULATED JUMPERS-PAIRALLIGATOR CLIP ONLYAL. CLIP W/ BLACK INSULATORAL. CLIP W/ RED INSULATOR

��”�8”36”��”�8”36”---------

IGNITION WIRE (CABLE)

SSC’s Ignition Wire is listed with Underwriters’ Laboratories. It is flame retardant and is resistant to heat, oil and moisture. Temperature range is -40o to 140o.

SSC# DESCRIPTION LENGTHIC-6�9IC-6�0IC-6��IC-6��

GTO-�5, �4 GAUGEGTO-�5, �4 GAUGEGTO-�5, �4 GAUGEGTO-�5, �4 GAUGE

�5 FT. PACKAGE�00 FT. ROLL500 FT. ROLL

�000 FT. ROLL

CAD CELL EYES

CC-601CAD CELL EYE (FLAME DETECTOR)For use in Honeywell C554A.Replaces: 130367Bubble Packed

CC-602CAD CELL EYE(FLAME DETECTOR)For use in Honeywell 630485.Old StyleBubble Packed

IGNITOR & TRANSFORMER TERMINAL CONNECTORS

IT-640STRAIGHT CAGE TERMINALPACKED �0/PACK

IT-641SPRING SNAP CABLE TERMINALPACKED �0/PACK

IT-642RING TERMINAL FORIGNITION CABLEPACKED �0/PACK

IT-643SPRING/ANGLEEXTENDED NYLON CAP

PACKED �0/PACK

IT-644SPRING/SOLDERLESSBRASS FERULEPACKED �0/PACK

IT-645SPRING/EXTENDEDWITH NYLON CAP

PACKED �0/PACK


ELECTRODES (IGNITORS)

109001ELECTRODE TO FITBECKETT AF & AFGSet of 2

109002ELECTRODE TOFIT BECKETTSet of 2

109051ELECTRODE TO FIT CARLIN 98THRU 301 CRDSet of 2

109052ELECTRODE TO FITCARLIN 501, 600, 601,701, 801, 1050 & 1150Set of 2

109053ELECTRODE TO FITCARLIN ELITE (EZ1)THRU 9” AIRTUBESet of 2

109130ELECTRODE TO FITWAYNE EH, HSR, MSRSet of 2

109131ELECTRODE TO FITWAYNE BURNERSAlso Fits Miller, LSI

109132ELECTRODE TO FITWAYNE EE, ER, ERA,EHASR, OE, OEA, M & MHSet of 2

109133ELECTRODE TO FITWAYNE MODEL M3” TO 3 1/2” AIRTUBESet of 2

ELECTRODES / SMOKE CANDLES109134ELECTRODE TO FITWAYNE BLUE ANGEL HS NEW STYLE TO 18”Set of 2

109135ELECTRODE TO FITWAYNE BLUE ANGELHS OLD STYLESet of 2

109145ELECTRODE TO FITWEIL MCLAIN QB180, QB300Set of 2

PICTURE NOT AVAILABLE

SMOKE CANDLES

Smoke Candles are handy for locating leaks in heating equipment. Place the smoke candle in the area you want to inspect, light it and look for the leak.

SSC# SMOKING TIMESM-605SM-606SM-607

�/� MINUTE� MINUTE

3 MINUTES

SMOKE PELLETS AND SMOKE MATCHES

SSC’s Smoke Pellets and Matches let you quickly test flues, chimneys, exhaust hoods, ductwork, furnaces and plumbing for leaks and backdrafts. The Pellets and Matches have significantly less smoke volume than our popular Smoke Candles for smaller test areas.

SMOKE PELLETS SMOKE MATCHES

SSC# DESCRIPTION TIME SMOKE VOLUMESM-550SM-55�SM-55�SM-553

PELLETPELLETPELLET

MATCHES

30 SEC.60 SEC.60 SEC.�0 SEC.

�00 CU./FT.400 CU./FT.500 CU./FT.50 CU./FT.


SMOKE TEST PAPER / HIGH TEMP. ROPE

SMOKE TEST PAPER

STP-604SMOKE TEST PAPERFits Bacharach, Dwyer and equivalent testers.50 pre-cut strips per package.Each strip is 7 1/2” long x 3/4” wide.

PACKED 50 STRIPS PER ZIP-LOCK BAG

HIGH TEMPERATURE ROPE

-Gasketing, insulation and packing material for boilers, wood stoves, ovens and other applications-Good to 1000oF (538oC)-Contains no asbestos-Easily bondable-Excellent chemical resistance-Can be cut to any desired lengthPACKED IN A ZIP-LOCK

BAG WITH LABEL

SSC# DIAMETER LENGTHHTR-470HTR-470AHTR-470BHTR-47�HTR-47�AHTR-47�BHTR-47�HTR-47�AHTR-47�BHTR-473HTR-473AHTR-473BHTR-474HTR-474AHTR-474B

�/4”�/4”�/4”3/8”3/8”3/8”�/�”�/�”�/�”3/4”3/4”3/4”�”�”�”

�5’�0’50’�5’�0’50’�5’�0’50’�5’�0’50’�5’�0’50’

HIGH TEMPERATURE KNIT TAPE

Made from the same fiberglass material as high temperature rope, our fiberglass knitted tape can be used for insulating pipe, lining furnaces and many other applications.

PACKED IN A PLASTIC BAG

SSC# SIZE LENGTHHTR-475HTR-477HTR-478

�/8” THICK x �” WIDTH�/8” THICK x � �/�” WIDTH�/8” THICK x �” WIDTH

�5’�5’�5’

HIGH TEMPERATURE RUBBER COATED TADPOLE TAPE

Our Tadpole Tape is coated with rubber to make installation easier.

PACKED IN A ZIP-LOCK BAG

ALUMINUM FOIL TAPE

EACH ROLL ISSHRINK-WRAPPEDFOR PROTECTION

SSC# SIZEDT-3�8DT-3�8A

�” x 50 yds.3” x 60 yds.

SMOKE TESTER

STP-605SMOKE TESTERIncludes Smoke Tester, Smoke Test Paper, Smoke Scale and carrying case.

Our Smoke Tester is made of a virtually unbreakable polycarbonate barrel. It features brass and stainless steel hardware and silicone lubrication. The sampling tube hooks into the smokepipe and the device will fit into Brigon and Bacharach cases.

DUCT TAPE

DT-317GRAY COLOREDDUCT TAPE2” x 60 yds.Each roll is shrink-wrappedfor protection.

DT-320BLACK COLOREDDUCT TAPE2” x 50 yds.Each roll isshrink-wrappedfor protection.

Gray Black

SSC# SIZE LENGTHHTR-479HTR-479AHTR-479B

3/8” BALL x � �/�” WIDTH3/8” BALL x � �/�” WIDTH3/8” BALL x � �/�” WIDTH

�5’�0’50’


V-BELTS / BLOWER BEARINGS / PULLEYS

V-BELTS

SSC’s V-Belts come packed in a sleeve with the number clearly marked. Antistatic, oil and heat resistant, these belts give you superior performance at a competitve price.

SSC# LENGTH4L-�704L-�804L-�904L-�004L-��04L-��04L-�304L-�404L-�504L-�604L-�704L-�804L-�904L-3004L-3�04L-3�04L-3304L-3404L-3504L-3604L-3704L-3804L-3904L-4004L-4�04L-4�04L-4304L-4404L-450

�7”�8”�9”�0”��”��”�3”�4”�5”�6”�7”�8”�9”30”3�”3�”33”34”35”36”37”38”39”40”4�”4�”43”44”45”

OUTSIDESSC# LENGTH4L-4604L-4704L-4804L-4904L-5004L-5�04L-5�04L-5304L-5404L-5504L-5604L-5704L-5804L-5904L-6004L-6�04L-6�04L-6304L-6404L-6504L-6604L-6704L-6804L-6904L-7004L-7�04L-7�04L-7304L-740

46”47”48”49”50”5�”5�”53”54”55”56”57”58”59”60”6�”6�”63”64”65”66”67”68”69”70”7�”7�”73”74”

OUTSIDE

BELT TO FIT LENNOX OIL BURNERSL-1600V-BELT TO FIT LENNOX16” Outside LengthReplaces: 0160

VARIABLE PITCH MOTOR PULLEYS

SSC# BORE SIZE OUTSIDE DIAMETERVP-850AVP-850BVP-850CVP-850DVP-850EVP-85�AVP-85�BVP-85�CVP-85�DVP-85�EVP-85�AVP-85�BVP-85�C

�/�”�/�”�/�”�/�”�/�”5/8”5/8”5/8”5/8”5/8”3/4”3/4”3/4”

�.5”�.87”3.�5”3.75”4.�5”�.5”

�.87”3.�5”3.75”4.�5”3.�5”3.75”4.�5”

BLOWER SHAFTS

Our Blower Shafts are machined for a precise fit and packed in a sleeve for protection. Any excess shaft can be cut off.

SSC# LAU# DESCRIPTIONBL-84�BL-84�BL-843BL-844

38-��05-0�38-�096-0�38-�095-0� ---

5/8” X �0” SHAFT3/4” X �0” SHAFT

�” X �5” SHAFT�” X 35” SHAFT

BLOWER THRUST COLLAR KITS TO FIT LAU

PACKED IN SETS OF � WITH THRUST WASHERS IN HANGING BAG WITH LABEL

SSC# LAU# DESCRIPTIONBL-83�BL-833

38-��06-0�38-��07-0�

3/4” THRUST COLLAR KIT�” THRUST COLLAR KIT

4L-410

FIXED HUB PULLEYS

SSC# BORE SIZE OUTSIDE DIA. LAU#VP-853AVP-853BVP-853CVP-853D

3/4”3/4”3/4”3/4”

4.80”6”7”8”

38��30��833�40�38��50�38��70�

V-BELT, FAN BELT DRESSING

V-931V-BELT, FAN BELTDRESSING12 oz. Spray Can

Use SSC’s V-Belt Dressing to temporarily shore up worn or slipping belts before replacing.


SHEET METAL SCREWS

- #8 thread- Self piercing- Hard steel -- zinc plated- Hex head type with screwdriver slot

PACKED �00/BOX

SSC# SIZE PACKAGE TYPESH-635ASH-635BSH-635C

�/�”3/4”�”

�00/BOX�00/BOX�00/BOX

BLOWER BEARINGS TO FIT LAU

SSC’s Blower Bearings are made of sintered bronze, oil impregnated with an oil cup. They are self-aligning, self- oiling and come with rubber spacers. They are packed two per plastic bag with hanging label and include insulators.

PilloW Block BearinGs

SSC# LAU# DESCRIPTIONBL-80�BL-80�BL-803

38-��04-0�38-�086-0�38-�087-0�

5/8” PILLOW BLOCK BEARING3/4” PILLOW BLOCK BEARING

�” PILLOW BLOCK BEARING

oil tyPe BearinGs

SSC# LAU# DESCRIPTIONBL-8�5BL-8�6BL-8�7

38-�404-0�38-�44�-0�38-�44�-0�

5/8” OIL TYPE BEARING3/4” OIL TYPE BEARING

�” OIL TYPE BEARING

sealed BearinGs

SSC# LAU# DESCRIPTIONBL-8��BL-8��BL-8�3

38-�443-0�38-�694-0�38-�443-03

5/8” SEALED BEARING3/4” SEALED BEARING

�” SEALED BEARING

BLOWER BEARINGS / PILOT TUBING

ALUMINUM PILOT TUBING

AT-524A1/4” OD ALUMINUMPILOT TUBING FORGAS APPLIANCES5 Foot Length

AT-524B3/8” OD ALUMINUMPILOT TUBING FORGAS APPLIANCES5 Foot Length

PACKED IN A PLASTIC BAG

AGA / CSA APPROVED BRASS BALL VALVE GAS COCK

122032AGA/CSA APPROVEDBRASS BALL VALVEGAS COCKRed Handle1/2”


1081401/4” GAS FLARE ADAPTER FOR GAS VALVE IN WATER HEATERBrass

BRASS

1081423/8” GAS FLARE ADAPTER FOR GAS VALVE IN WATER HEATERBrass

GAS FLARE ADAPTERS FOR WATER HEATERS

12” PILOT LIGHTERST-35812” PILOT LIGHTER Plated HandleNon-telescoping

NYLON FLEXIBLE DUCT STRAPSSSC’s Duct Straps are used in attaching flex-duct to registers and grilles.

SSC# DESCRIPTION FITS TUBE DIA.WT-637AWT-637BWT-638AWT-638B

WHITE-�75LB TENSILE, 3�” LBLACK-�75LB TENSILE, 3�” LWHITE-�75LB TENSILE, 43” LBLACK-�75LB TENSILE, 43” L

�” - 9”�” - 9”

6” - �3”6” - �3”

PACKED �5/BAG


VACUUM BAGS TO FIT MASTERCRAFT

SSC’s Vacuum Bags will fit the most popular vacuums in the field including Mastercraft.

PACKED 5/BAG

VB-632APACKAGE OF 5 VACUUM BAGS TO FIT MASTERCRAFTSMALL SIZED CLEANERS3 1/2 GallonsStyle #: 4464

VB-632BPACKAGE OF 5VACUUM BAGSTO FIT MASTERCRAFTMEDIUM SIZED CLEANERS5 GallonsStyle #: 4465

DISPOSABLE VINYL GLOVES

Our vinyl disposable gloves are an economical way to protect the hands from dirt, grease and other harmful chemicals while working in the field. Unlike rubber surgical gloves, vinyl gloves do not become slippery when covered with #2 oil. Available in large and medium sizes, they can be thrown out after each job or used over and over. PACKED �00/BOX

GL-627DISPOSABLE VINYL GLOVESMedium Size

GL-628DISPOSABLE VINYLGLOVESLarge Size

ANTI-VIBRATION TUBE CLAMPS

Anti-Vibration Tube Clamps can be used to stop annoying vibrations in tubing. They are also used as a safety feature when hanging copper oil lines since the clamp’s rubber cushion eliminates any copper-against-metal situations.

TC-630ANTI-VIBRATIONTUBE CLAMP3/8” ID

TC-631ANTI-VIBRATIONTUBE CLAMP1/2” ID

DUST MASKS

108510DUST/PARTICLE MASK

Use these economical dust masks for protection against soot and undesirable particles while cleaning boilers, burners, furnaces, etc.

PACKED 50/BOX

SOOT SNAKE FLEXIBLE VACUUM CLEANER HOSE

This handy attachment reaches places impossible to get with a standard hose during vacuum clean-ups. It works well with today’s compact boilers and it slips easily onto any standard 1 1/2” rubber vacuum cleaner hose.

VB-632CSOOT SNAKE FLEXIBLEVACUUM CLEANER HOSE7/8” Diameter x 48” Long

SOOT SHOVEL

VB-632DSOOT SHOVEL4 1/2” W x 19 1/2” LSteel with black enamel finish.

SOOT SAW

VB-632EFLEXIBLE SOOT SAW FOR CLEANING BOILERS & FURNACESZinc Coated Steel Soft Vinyl Handle

NITRILE GLOVES - BLUE COLOR

SSC# SIZEGL-6�6GL-6�6A

LARGEMEDIUM

PACKED �00 GLOVES PER BOX

PLASTIC DISPOSABLE SHOE COVERSShoe covers minimize the chance of getting customers’ homes dirty by tracking in dirt on shoes.

108512PLASTIC DISPOSABLE SHOE COVERSBlue Color with Elastic100/Bag

VAC BAGS / TUBE CLAMPS


COUPLERS TO FIT BELL & GOSSETT

COUPLERS TO FIT BELL & GOSSETT

SSC-779COUPLER TO FIT B&G MODELS 75 TO 150 (100 SERIES), 1 1/2, 2, HV, PR; ARMSTRONG MODELSS-25, S-34, S-35, H-32, H-411/2” x 1/2” Shafts1/12 to 1/6 HPOld #: PZ-4291New #: 118705Arm. #: 806026-001(RM-876)

MADE OF DURABLE CAST IRON WITH SHIELDED SPRINGS

SSC-790SPRING-FLEX COUPLERTO FIT B&G AND ARMSTRONGCIRCULATORSCan be used on majority of1/2” x 1/2” shaft curculators.1/12 to 1/3 HPOld #: PZ-4291New #: 118705Arm. #: 806026-001(RW-675)

SPRING-FLEX COMPENSATES FOR ANY SHAFT MISALIGN-

MENT AND OPERATES SILENTLY IN START-UP AND

RUNNING MODES

SSC-780COUPLER TO FIT B&GMODELS 1 1/2, LD3, HD3;ARMSTRONG MODELSS-45, S-461/2” x 1/2” Shafts1/4 to 1/3 HPHeavy SpringsOld #: PSZ-12291New #: 118723Arm. #: 806168-001(RM-858)

MADE OF DURABLE CAST IRON WITH HEAVY-DUTY SPRINGS

SSC-781COUPLER TO FIT B&GMODELS 60-1, 60-2 (OLD),60-11 (NEW); ARMSTRONGMODELS H-51, H-521/2” x 1/2” YokeOld #: PDZ-12291New #: 118473Arm. #: 810120-003(RM-798)MADE OF DURABLE CAST IRON

WITH HEAVY-DUTY SPRINGS

SSC-790ASPRING TYPE COUPLER TO FIT B&G MODELS 60-1, 60-2 (OLD), 60-11 (NEW); ARMSTRONG MODELS H-51, H-521/2” x 1/2” YokeOld #: PDZ-12291New #: 118473Arm. #: 810120-003

COMPENSATES FOR ANY SHAFT MISALIGNMENT AND

OPERATES SILENTLY IN START-UP AND RUNNING

MODES

SSC-782COUPLER TO FIT B&GMODELS PD35, PD37, 60-3, 60-4 (OLD), 60-13,60-14 (NEW); ARMSTRONGMODELS H-54, H-541/2” x 5/8” KeywayOld #: P4Z-4291New #: 118709Arm. #: 810120-006(RM-799)

MADE OF DURABLE CAST IRONWITH HEAVY-DUTY SPRINGS

SSC-783COUPLER TO FIT B&GMODELS PD39, 60-5 TO 60-10 (OLD), 60-15 TO 60-21 (NEW); ARMSTRONGMODELS S-69, H-63 TO H-685/8” Keyway x 1/2” YokeOld #: PWHZ-6291New #: 186410Arm. #: 810120-008(RM-791)


SSC-784COUPLER TO FIT B&G5/8” Keyway x 5/8” KeywayOld #: PD2Z-12291New #: 118476(RM-794)


BP-394COUPLER SET SCREWOld #: P-453New #: PO1800(RM-451)


WOODS COUPLINGS / PARTS TO FIT B&G

WOODS SURE-FLEX COUPLERS

SSC# DESCRIPTION WC-79�AWC-79�BWC-79�CWC-79�DWC-79�EWC-79�FWC-793AWC-793BWC-793CWC-793DWC-793EWC-793FWC-794AWC-794BWC-794CWC-794DWC-794EWC-794FWC-794GWC-794HWC-794IWC-794JWC-795AWC-795BWC-795CWC-795DWC-795EWC-795FWC-795GWC-795HWC-795IWC-795JWC-796AWC-797AWC-798AWC-799A

3JE RUBBER SLEEVE3JE FLANGE-�/�”3JE FLANGE-5/83JE COMPLETE COUPLER-�/� X �/�3JE COMPLETE COUPLER-5/8 X 5/83JE COMPLETE COUPLER-�/� X 5/84JE RUBBER SLEEVE4JE FLANGE-�/�4JE FLANGE-5/84JE COMPLETE COUPLER-�/� X �/�4JE COMPLETE COUPLER-5/8 X 5/84JE COMPLETE COUPLER-�/� X 5/85JE RUBBER SLEEVE5JE FLANGE-�/�5JE FLANGE-5/85JE FLANGE-3/45JE COMPLETE COUPLER-�/� X �/�5JE COMPLETE COUPLER-5/8 X 5/85JE COMPLETE COUPLER-3/4 X 3/45JE COMPLETE COUPLER-�/� X 5/85JE COMPLETE COUPLER-�/� X 3/45JE COMPLETE COUPLER-5/8 X 3/46JE RUBBER SLEEVE6JE FLANGE-5/86JE FLANGE-3/46JE FLANGE-�6JE COMPLETE COUPLER-5/8 X 5/86JE COMPLETE COUPLER-3/4 X 3/46JE COMPLETE COUPLER-� X �6JE COMPLETE COUPLER-5/8 X 3/46JE COMPLETE COUPLER-5/8 X � 6JE COMPLETE COUPLER-3/4 X �7JE RUBBER SLEEVE8JE RUBBER SLEEVE9JE RUBBER SLEEVE�0JE RUBBER SLEEVE

MOTOR PARTS TO FIT BELL & GOSSETT

BP-395COUPLER-MOTOR MOUNT KIT TO FIT 1/12 HP B&G100 SERIES CIRCULATORSContains 1 cast iron SSC-779coupler and 1 set of BP-399motor mounts with ground wire.PACKED IN A PLASTIC BAG

A broken coupler is usually the result of sagging motor mounts. Both should be replaced at the same time. This kit offers a handy combination.

BP-399MOTOR MOUNTSTO FIT B&G 1/12 HPSold By SetReplaces: 118223(RM-539)

BP-397MOTOR MOUNTSTO FIT B&G 1/6 HPSold By Set-Front & RearMOT 102-6121Replaces: 118227(K-1174)

BP-382SWITCH PLATE ASSEMBLY TO FIT B&G1/12 HPMOT 100Z-516(RM-549)

BP-382MYMYLAR INSULATORTO FIT NEW STYLE DIECAST BELL & GOSSETTMOTORS(RM-549-N)

BP-383KLIXON OVERLOADPROTECTOR1/12 HPMOT 100-547Replaces: 118181(K-1181)

PACKED PAIR/BOX WITH COPPER GROUNDING WIRE

1/12 hP Mounts 1/6 hP Mounts

Need Plumbing Parts? We stock Bath & Shower specialties, Lav & Sink specialties and Toilet specialties. See pages 94-�03 for our complete line.


OPEN IMPELLER WRENCH

ST-361OPEN IMPELLER WRENCHFits all open-faced impellers.

CLOSED IMPELLER WRENCH

ST-362CLOSED IMPELLER WRENCHFits all closed impellers. Haslarge handle for leverage.

MOTOR PARTS TO FIT BELL & GOSSETT

BP-398AMOTOR SPACERTO FIT 1/12 HPB&G MOTORS(RM-885A)

SHOWN ACTUAL SIZE

BP-398BMOTOR SPACERTO FIT 1/6 HPB&G MOTORS(RM-886A)

SHOWN ACTUAL SIZE

SC-737SILVER CONTACTReplaces: Hydrovalve# RD-737

SC-739SILVER CONTACTReplaces: Hydrovalve# RD-739

BALL BEARINGS

SSC’s single row deep groove ball bearings have double, non-contact seals with a high temperature lubricant. They provide quiet, long-life performance with minimum vibration for most electric motors.

SSC# I.D. (BORE) OD WIDTH6�0�6�0�-�66�036�03-6�56�046�056�066�0763036304

.59�”

.6�9”

.669”

.6�5”

.787”

.984”�.�8�”�.378”.669”.787”

�5mm�6mm�7mm�5.875mm�0mm�5mm30mm35mm�7mm�0mm

�.378”�.378”�.574”�.574”�.854”�.047”�.440”�.834”�.854”�.047”

35mm35mm40mm40mm47mm5�mm6�mm7�mm47mm5�mm

.433”

.433”

.47�”

.47�”

.55�”

.590”

.6�9”

.669”

.55�”

.590”

��mm��mm��mm��mm�4mm�5mm�6mm�7mm�4mm�5mm

MOTOR START AND RUN CAPACITORS

SSC# TYPE MFD VOLTMC-5�0MC-5��MC-5��MC-5�3MC-5�4MC-5�5MC-5�6MC-5�7MC-5�8MC-5�9MC-5�0MC-5��MC-5��MC-5�3MC-5�4MC-5�5MC-535MC-536MC-537MC-540MC-54�

START CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORSTART CAPACITORRUN CAPACITORRUN CAPACITOR

7�-7888-�08

�08-�30��4-�49�45-�75�6�-�93�89-��7�00-�40�43-�9��70-3�43�4-388340-408378-440400-480460-55�540-648

36-4353-6435UF

�530

��5��5��5��5��5��5��5��5��5��5��5��5��5��5��5��5��0��0370370370

MOTOR BEARING PULLER

ST-377MOTOR BEARING PULLER

This is a special two armed puller designed to fit behind all pool motor bearings, eliminating the need for bearing puller adapters.

ARMATURE HOLDING TOOLThis tool holds old style Century and Franklin armatures so the impeller can be removed. It fits into a 5/8” socket wrench.

ST-375ARMATURE HOLDING TOOL

SEAL SETTING TOOL

ST-379SEAL SETTING TOOL

This makes setting seals a snap. Works on pumps up to 3 HP.

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900 3�

SEAL KITS TO FIT B&G

SEAL KITS TO FIT BELL & GOSSETT

BP-381SEAL KIT #7 TO FIT B&GMODELS 75 TO PD37,HV TO 60-14; ARMSTRONGMODELS S-25 TO S-571/2” ShaftOld #: #7 KitNew #: 118681Arm. #: 816706-001(RM-880W / K-1339)

1/2” shaft

rePlaces #7seal kit

BP-380SEAL ASSEMBLYTO FIT B&G MODELS 75 TO PD37, HV TO 60-14Used primarily on castiron circulators where noceramic is needed.New #: 118680(RM-880)

BP-379SEAL CERAMIC ANDRUBBER CUP TO FITB&G MODELS 75 TOPD37, HV 50 60-14;ARMSTRONG S-25, S-57New #: 118619Arm. #: 816558-000(RM-880S / K-1249)

BP-384SEAL KIT TO FITB&G 60 SERIES3/4” ShaftNew #: 186499

BP-386SEAL KIT TO FIT B&G1 1/4” SHAFTReplaces: 186862

BP-386ASEAL KIT TO FIT B&G1 1/2-2-51 1/4” For 3531 PumpReplaces: 186877

1/2” shaft

3/4” shaft

1 1/4” shaft

1 1/4” shaft

The BP-400K and the BP-371K seal kits eliminate expensive machine work such as grinding, refacing and lapping. It also converts cast iron assemblies into brass fitted pumps that can be used for fresh water service. We offer this as a kit or in individual pieces.

BP-400KSEAL KIT WITH BRASS PLATE TO FIT B&G1/12 HP CAST IRONCIRCULATORSContains:1 BP-400 Seal1 BP-400P Brass Plate1 BP-400W Brass Washer1 B-52 Body Gasket(K-1150)

BP-371KSEAL KIT WITH BRASSPLATE TO FIT B&G1/6 HP CAST IRONCIRCULATORSContains:1 BP-400 Seal1 BP-371P Brass Plate1 BP-400W Brass Washer1 B-53 Body Gasket(K-1151)

PACKED IN A PLASTIC BAG WITH LABEL

BP-400SEAL ONLY TO FITB&G 1/12 HP CAST IRONWill Fit 1/12 & 1/6 Brass Plates(K-1150Y)

BP-400PBRASS PLATE ONLYWill Fit 1/12 HP Only

BP-371PBRASS PLATE ONLYWill Fit 1/6 HP only

BP-400CCERAMIC FORSEAL ONLYWill Fit 1/12 & 1/6Brass Plates

BP-400WBRASS WASHER ONLY

1/12 hP kit 1/6 hP kit

MS-356SEAL KIT TO FIT B&G1 1/8” SHAFTReplaces: DP0476, 180017

MS-359SEAL KIT TO FIT B&G5/8” SHAFTReplaces: 180014

5/8” shaft

1 1/8” shaft

For a complete list of replacement pump seals for other manufacturers please turn to our Pump Seal OEM Cross Reference on pages 63-69.


CIRCULATOR PARTS TO FIT BELL & GOSSETT

BP-387FLANGED FRONT BEARINGTo fit larger B&G andArmstong pumps.(RM-892)

BP-388FRONT BEARINGTO FIT B&G(RM-828)

CIRCULATOR PARTS TO FIT B&G

BP-389FRONT BEARINGTO FIT B&GThin WallFor Late Models(K-1152)

BP-389NFRONT BEARINGTO FIT B&GKnurled(K-1152-N)

BP-372PUMP SHAFT & SLEEVETO FIT B&G AND ARMSTRONGOld #: PZ-440CNew #: 189035Arm. #: 106028-000(RM-881)

BP-372CCOPPER SLEEVE TO FIT B&G, ARM. SHAFT(RM-881-B)

BP-372KSHAFT KEY TO FITB&G, ARM. SHAFTOld #: P-4138, PO4940Arm. #: 974507-100(RM-519)

BP-385ASPRING ONLY TOFIT B&G OIL WELLCOVER ASSEMBLY(RM-535C)

BP-390PRESSURE REDUCINGVALVE STRAINER TO FIT B&GNew #: 118036(K-1276)

B-63STRAINER GASKETTO FIT B&G PRESSUREREDUCING VALVES(K-1277)ACTUAL SIZE: � �/4” OD X �” ID

ZOOM SPOUT OILER

ZM-322ZOOM-SPOUT OILER4oz. Tubes WithZoom-Spout

Use the high quality turbine oil in SSC’s Zoom-Spout Oiler to oil bearing assemblies, electric motors, heaters, blowers, bushings, shafts, air conditioners and home and shop appliances. The handy telescoping pole reaches into hard-to-get places.

BP-372NSHAFT NUT FORB&G SHAFTOld #: P44200(RM-859)

BP-372WLOCK WASHER FOR ABOVE NUT

BP-385OIL WICK TO FIT B&GCIRCULATOR BEARINGASSEMBLIESHeavy Duty WoolReplaces: PO4881, B62-2(RM-506)

BP-372APLASTIC IMPELLER FORB&G 100, ARM. S-25-1/12th HPOld #: P4Z-335New #: 189132Arm. #: 812961-111(RM-887-P-A & B)BLACK PLASTIC

BP-387AREAR BEARING TO FIT B&G 1/12HP; ARMSTRONG S-25Old #: P4Z-4115New #: 118697Arm. #: 816001-000


BP-377CIRCULATOR BEARINGASSEMBLY TO PUMPHOUSING BOLT KITFits B&G 100 and Taco 1104 Bolts Per Bag

BP-378CIRCULATOR BEARINGASSEMBLY TO MOTORBOLT KITFits B&G 100 and Taco 1004 Bolts Per Bag

GASKET AND BOLT KITS TO FIT BELL & GOSSETT

BP-392CIRCULATOR BOLT KIT TO FIT B&G, TACO AND MOST CIRCULATORSContains 4 bolts and 4 nuts.PACKED IN A HANGING PLASTIC

BAG WITH LABEL

BP-393CIRCULATOR BOLT & GASKET KIT TO FIT MOST CIRCULATORSContains 4 bolts, 4 nutsand 2 #T-36 gaskets.PACKED IN A HANGING PLASTIC

BAG WITH LABEL

CAST IRON FLANGES PAINTED REDTO FIT BELL & GOSSETT

CAST IRON - PAINTED REDTO MATCH B&G

SSC# SIZE FLANGE KIT CONTENTSBP-373BP-373ABP-373BBP-374BP-374ABP-374BBP-375BP-375ABP-375BBP-376BP-376ABP-376B

3/4”3/4”3/4”�”�”�”

� �/4”� �/4”� �/4”� �/�”� �/�”� �/�”

� FLANGES, 4 BOLTS, 4 NUTS� FLGS., 4 BOLTS, 4 NUTS, � T-36 GASK

� FLANGES ONLY� FLANGES, 4 BOLTS, 4 NUTS

� FLGS., 4 BOLTS, 4 NUTS, � T-36 GASK� FLANGES ONLY




HEATING SECTION - PARTS FOR B&G

CIRCULATOR FLANGE TOOL

TP-442CIRCULATORFLANGE TOOLMade of Steel

Use this tool to speed up the removal or tightening of circulator flanges.

BP-391FLANGE GASKET ANDBOLT KIT TO FIT B&G 100 SERIES CIRCULATORSReplaces: P64910Contains 4 bolts, 4 nuts and 2 B-54 gaskets.

PACKED IN A HANGING PLASTICBAG WITH LABEL

BP-396SET OF 2 CIRCULATORFLANGE GASKETSContains 2 #T-36 gaskets.PACKED IN A HANGING PLASTIC

BAG WITH LABEL

PACKED IN A HANGING PLASTIC BAG WITH LABEL

BP-393BRCIRCULATOR BOLT & GASKET KIT WITH NEOPRENE (BLACK RUBBER) GASKETS TO FIT MOST CIRCULATORSContains 4 bolts, 4 nutsand 2 #T-36BR gaskets.

includes Black ruBBer Gaskets

includes red ruBBer Gaskets

CIRC. FLANGES / CIRC. BOLT & GASK. KITS

Use SSC’s Website to Find Your Replacement Parts and Order Online!

Place orders online using our shopping cart feature.Find your part using our multi-functional search engines.Registration is required. This ensures that only wholesalers & rebuilders, not the trade or general public, can see pricing and use the shopping cart.

•

•

•

www.strainerscreen.com


GASKETS TO FIT BELL & GOSSETT

T-36FLANGE GASKET TO FITB&G, TACO, GRUNDFOS AND OTHER CIRCULATORS1/8” Thick Smooth Finish Red RubberThis will fit the majority of flanges in the field.(Not for use on H.V. Flange)(GF-219)

Material: sMooth finish red ruBBer

ACTUAL SIZE: 4” X � 5/8”

T-36BRT-36 CIRCULATOR FLANGE GASKET IN 1/8” THICKNEOPRENE RUBBER(Black Rubber)

Material: Black neoPrene ruBBer


Material: cloth finish red ruBBer

T-36CLT-36 CIRCULATOR FLANGEGASKET IN 1/8” THICK CLOTH FINISH RED RUBBER


T-36EPT-36 CIRCULATORGASKET IN 1/8” THICKEPDM RUBBER(High-Temp Black Rubber)

Material: ePdM (hiGh-teMP) Black ruBBer


B-54FLANGE GASKET TO FITB&G MODELS 75 TO 150(100 SERIES); ARM. S-25Old #: P-518New #: 118368Arm. #: 816653-000(GB-232)

ACTUAL SIZE: � �/8” ODX � 3/4” ID


B-16FULL FACED FLANGE GASKET TO FIT B&G MODELS 1 1/2, HV(HIGH VELOCITY PUMP);ARMSTRONG S-34, H-32Old #: P-618New #: 118373Arm. #: 804034-000

B-198ROUND FLANGE GASKETTO FIT B&G MODELS 1 1/2,HV (HIGH VELOCITY PUMP);ARMSTRONG S-34, H-32Old #: P-618New #: 118373Arm. #: 804034-000


ACTUAL SIZE: 4 5/8” X � 3/4”

B-188AFLANGE GASKETTO FIT B&G LITTLERED CIRCULATORLR20 PumpACTUAL SIZE: � 3/�6” OD

X � �/4” ID

B-188FLANGE GASKET TO FIT B&G 2” CIRCULATORSFits B&G Pumps 60-14,60-18 to 60-21;Armstrong H-54, H-66 to H-68Old #: P-818New #: 118378Arm. #: 816117-000

ACTUAL SIZE: � �5/�6” ODX � 3/8” ID

B-28FLANGE GASKET TO FITB&G MODELS LD3, HD3, PD35, PD37, PD39;ARMSTRONG S-45, S-55,S-57, S-69Black Rubber-7/32” ThickOld #: GKT2-1454New #: 118129Arm. #: 805201-000(GB-271)

ACTUAL SIZE: 3 7/8” ODX 3 3/8” ID




B-205THIN FLANGE GASKETTO FIT B&G MODEL 2;ARMSTRONG S-35 WITH FLAT FLANGE FACEOld #: F-818New #: 118065Arm. #: 805209-000

ACTUAL SIZE: 3 5/�6” ODX � 5/�6” ID

B-59FLANGE GASKETTO FIT B&G MODEL80 SERIES1/6 HP(GB-253)ACTUAL SIZE: � 9/�6” OD

X � 3/�6” ID

B-56FLANGE GASKET TO FIT B&G MODELS75 AND 100 MADEBEFORE 1956Old #: P3-418New #: 118351(GB-237)


B-57FLANGE GASKET TO FIT B&G 4 BOLTBOOSTER MADEBEFORE 1950Old #: F-418New #: 118054(GB-238)ACTUAL SIZE: � �/8” OD

X � �/4” ID

A-288FLANGE GASKET TO FIT ARMSTRONGH-41, H-51, H-52Replaces: 805176-000

ACTUAL SIZE: � �/4” ODX � �/�” ID

arMstronG only flanGe Gasket

A-21BASE GASKET TO FITB&G 1510 PUMP;ARMSTRONG 4030 PUMPAlso Fits Marlow(K-1442)ACTUAL SIZE: �� /�” OD

X 9 �/�” ID

B-199BODY GASKET TO FITB&G SERIES 1510 PUMPSOld #: P-57770

ACTUAL SIZE: �4” ODX �� 3/4” ID

B-199ABODY GASKET TO FITB&G SERIES 1510 PUMPSOld #: P-80765

ACTUAL SIZE: �� 3/8” ODX �� 7/8” ID

B-200BODY GASKET TO FITB&G SERIES 80 PUMPSOld #: P-48690ACTUAL SIZE: �0” OD X

9 �/�” ID

B-200ABODY GASKET TO FIT B&G 60 SERIES PUMPReplaces: P-57701ACTUAL SIZE: 8 7/8” OD

X 8 �/�6” ID

B-51BODY GASKET TO FIT B&G MODELS PD35, PD37, 60-11 TO 60-14; ARMSTRONG MODELSS-55, S-57, H-51 TO H-54Old #: PWH1-554New #: P57410Arm. #: 106158-000(GB-229)

ACTUAL SIZE: 5 7/�6” ODX 5 �/8” ID

B-51ABODY GASKET WITHBOLT HOLES TO FITB&G 60 SERIES PUMPSAlternate to #B-51


B-205ATHICK GASKET TO FIT B&G MODEL 2; ARMSTRONG S-35 PUMP WITH GROOVED FLANGEThickness: 1/4”ACTUAL SIZE: � 3/4” OD

X �” ID

Please Note: Many B&G parts can be used on Armstrong circulators and vice versa.


GASKETS TO FIT B&G / PARTS TO FIT TACO

B-60BODY GASKET TO FITB&G MODELS PD-39, 60-15 TO 60-21; ARMSTRONG S-69,H-63 TO H-68Old #: PWH-1054New #: P-57700Arm. #: 106592-000(GB-254)

ACTUAL SIZE: 7 7/8” ODX 7 �/�6” ID

B-50BODY GASKET TO FITB&G MODELS 2 1/2, 3LD,3HD, 1 PR; ARMSTRONGMODELS S-45, S-46, H-41Old #: P1-12133New #: PO5800Arm. #: 106050-000(GB-224)

ACTUAL SIZE: 4 5/8” ODX 4 �/4” ID

B-55BEARING GASKET (SHIM)TO FIT B&G MODELS 75 TO PD-37, 60-11 TO 60-14;ARMSTRONG MODELS S-25TO S-57, H-51 TO H-54Old #: P-455New #: PO1830Arm. #: 103408-000(GB-233)

ACTUAL SIZE: � 3/�6” ODX � �/8” ID

B-52BODY GASKET TO FITB&G MODELS 75-150;ARMSTRONG MODELS S-25Popularly known as series100 body gasket.Old #: P-3133New #: PO4080Arm. #: 104442-000(GB-230)

B-53BODY GASKET TO FIT B&G MODELS 1 1/2, 2,HV; ARMSTRONG S-34,S-35, H-32Fiber-1/32” ThickOld #: P-4133New #: PO4890Arm. #: 106049-000(GB-231)


ACTUAL SIZE: 3 �/�6” ODX � ��/�6” ID

B-61GASKET TO FIT B&GREAR BEARINGShim for largerB&G pumps.60 Series(GB-257)


B-58INTERIOR GASKET TO FIT B&G SERIES 100 ALUMINUM BOOSTERS Only for aluminum 1/12 HP.(GB-251)

ACTUAL SIZE: 3 �/�6” ODX � 3/4” ID

B-62INTERIOR GASKET TO FITB&G ALUMINUM MODELSFits all aluminum modelsexcept 1/12 HP.(GB-261)ACTUAL SIZE: 3 7/8” OD

X 3 �/�” ID

PARTS TO FIT TACO CIRCULATORS

TP-425COUPLER TO FIT TACO 110 CIRCULATOR1/2” x 3/8” ShaftReplaces: 110-009RP(RM-883)

TP-427MOTOR MOUNTS TO FITTACO 110, GE ANDMARATHONSold By Set(RM-838)

TP-420WATER SEAL TO FITTACO 110 CIRCULATORReplaces: 110-275RP(RM-860)

TP-420CCERAMIC ONLY FORTACO 110 PUMP SEAL

Many Taco parts will fit Econo, Modern and Metal Master circulators.


SEAL KITS & PARTS TO FIT TACO

TP-420KWATER SEAL KIT TO FITTACO 110, 111, 112, 113,117 AND 120Kit includes gaskets and seal.

SKIN-PACKED FOR DISPLAY

TP-415WATER SEAL KIT TO FITTACO 121-138, ALL 1600SERIES, ALL 1900 SERIESReplaces: 1600-170RPKit includes 3 body gaskets,1 seal, 1 bolt, 1 machinedwasher and 1 packet oflubricant.

1600 seal kit

110 seal kit

SKIN-PACKED FOR DISPLAY

TP-414SEAL ONLY TO FITTACO 1600, 1900SERIES PUMPS

TP-412OIL SEAL TO FIT TACO110 CIRCULATOR(RM-861)

TP-424FELT OIL WICKTO FIT TACO 110CIRCULATOR(RM-871)

TP-422STANDARD BEARING TO FIT TACO 110CIRCULATOR1 1/2” Long(RM-869)

TP-428OIL RETAINERTO FIT TACO 110CIRCULATOR(RM-872)

TP-430SHAFT TO FITTACO IMPELLER4 7/8” Threaded(K-1162)

TP-431SHAFT TO FITTACO IMPELLER5 1/2” Threaded(RM-863)

TP-432SHAFT TO FITTACO IMPELLERStandard4 3/8” Threaded(RM-862)

TP-433SHAFT TO FITTACO IMPELLER4 1/2” Not Threaded(RM-832-A)

TP-434SHAFT TO FITTACO IMPELLER4 3/4” Not Threaded(K-1163)

TP-426SHAFT TO FITECONO CIRCULATORKnurledSee Econo sectionfor illustration.(RM-864)

TP-410INNER OIL SEAL TO FITTACO 110 CIRCULATORFor AluminumReplaces: 110-263RP(K-1447)

TP-411OUTER OIL SEAL TO FITTACO 110 CIRCULATORFor AluminumReplaces: 110-265RP(K-1448)

TP-421BEARING TO FIT TACO110 CIRCULATORFor AluminumReplaces: 110-273RP(K-1450)

TP-415BBOLT ONLY TO FITTACO 1600, 1900SERIES PUMPSReverse Thread

TP-415WWASHER ONLY TO FITTACO 1600, 1900SERIES PUMPSMachined Steel


TP-423CIRCULATOR FELTPAD TO FIT TACO 110For AluminumReplaces: 110-143RP(K-1449)

TP-429SHAFT RETAINER TO FITTACO 110 CIRCULATORTaco #: 110-111RP(RM-836)

ZOOM SPOUT OILER

ZM-322ZOOM-SPOUT OILER4 oz. Tubes WithZoom-Spout

CAST IRON FLANGES PAINTED GREEN TO FIT TACO

CAST IRON - PAINTED GREEN TO MATCH TACO

SSC# SIZE FLANGE KIT CONTENTSTP-438TP-438ATP-438BTP-439TP-439ATP-439BTP-440TP-440ATP-440BTP-44�TP-44�ATP-44�B

3/4”3/4”3/4”�”�”�”

� �/4”� �/4”� �/4”� �/�”� �/�”� �/�”







HEATING SECTION - PARTS FOR B&G

GASKET AND BOLT KITS TO FIT TACO

BP-392CIRCULATOR BOLT KITTO FIT B&G, TACO ANDMOST CIRCULATORSContains 4 bolts & 4 nuts.PACKED IN A HANGING PLASTIC

BAG WITH LABEL

PACKED IN A HANGING PLASTIC BAG WITH LABEL

BP-393BRCIRCULATOR BOLT & GASKET KIT WITH NEOPRENE (BLACK RUBBER) GASKETS TO FIT MOST CIRCULATORSContains 4 bolts, 4 nutsand 2 #T-36BR gaskets.

includes Black ruBBer Gaskets

BP-393CIRCULATOR BOLT &GASKET KIT TO FITMOST CIRCULATORSContains 4 bolts, 4 nutsand 2 T-36 gaskets.PACKED IN A HANGING PLASTIC

BAG WITH LABEL

includes red ruBBer Gaskets

TP-435FLANGE GASKET AND BOLT KIT TO FIT TACO 110, 007, ETC.CIRCULATORSContains 4 bolts, 4 nutsand 2 #T-42 gaskets.


BP-396SET OF 2 CIRCULATORFLANGE GASKETSContains 2 #T-36 gaskets.


CIRCULATOR FLANGE TOOL

TP-442CIRCULATORFLANGE TOOLMade of Steel

Use this tool to speed up the removal or tightening of circulator flanges.


ST-362CLOSED IMPELLER WRENCHFits all closed impellers. Haslarge handle for leverage.






FLANGES, CIRCULATOR KITS TO FIT TACO


GASKETS TO FIT TACO

T-36FLANGE GASKET TO FITTACO, B&G, GRUNDFOSAND OTHER CIRCULATORS1/8” Thick Smooth FinishRed RubberThis will fit a majority of flangesin the field.(GF-219)




T-36CLT-36 CIRCULATOR FLANGEGASKET IN 1/8” THICK CLOTHFINISH RED RUBBER



T-36BRT-36 CIRCULATOR FLANGEGASKET IN 1/8” THICKNEOPRENE RUBBER(Black Rubber)



T-36EPT-36 CIRCULATOR FLANGEGASKET IN 1/8” THICK EPDM RUBBER(High-Temp Black Rubber)



T-45FLANGE GASKET TO FITTACO, GRUNDFOS1/8” Thick Smooth FinishRed RubberReplaces: 110-023RP(GT-218)



T-45CLT-45 CIRCULATOR FLANGEGASKET IN 1/8” THICK CLOTHFINISH RED RUBBER



T-45BRT-45 CIRCULATOR FLANGEGASKET IN 1/8” THICKNEOPRENE RUBBER(Black Rubber)



T-45EPT-45 CIRCULATOR FLANGEGASKET IN 1/8” THICK EPDM RUBBER(High-Temp Black Rubber)


T-42FLANGE GASKET TO FITTACO 007, 110 PUMPSBlack RubberReplaces: 110-339RP(GT-148)ACTUAL SIZE: � �/4” OD

X �” ID

T-43FLANGE GASKET TOFIT TACO OLD STYLE007 CIRCULATORReplaces: 110-227RP(GT-149)ACTUAL SIZE: � 7/�6” OD

X � �5/�6” ID

T-287FLANGE GASKET TO FITTACO 0010, 0012, 0013Replaces: 110-339RPACTUAL SIZE: � 7/�6” OD

X � �/�6” ID

GASKETS TO FIT TACO


T-152FLANGE GASKET TOFIT TACO 120 & 1600CIRCULATORSReplaces: 1600-169RPACTUAL SIZE: 3 3/�6” OD

X � 3/8” ID

T-152AFULL FACED FLANGEGASKET TO FIT TACO120, 1600 CIRCULATORSReplaces: 1600-169RP

ACTUAL SIZE: 6” X 3 3/8”

T-152BGASKET TO FITTACO 120

ACTUAL SIZE: 5 �/4” ODX � �/�” ID

T-286FLANGE GASKET TO FITTACO SHUT-OFF VALVEMaterial: Smooth Red RubberReplaces: 254 for 3/4”, 255for 1”, 256 for 1 1/4”

T-286NFLANGE GASKET TO FITTACO SHUT-OFF VALVEMaterial: Neoprene(Black Rubber)Replaces: 254 for 3/4”,255 for 1”, 256 for 1 1/4”

ACTUAL SIZE: 4 �/8” X � 3/4”

T-44BODY GASKET TO FITTACO 110, 112, 117Commonly For AluminumReplaces: 110-364RP(GT-172)ACTUAL SIZE: 3 9/�6” OD

X � �5/�6” ID

GASKETS TO FIT TACO

T-41BODY GASKET TO FIT TACO 110 PUMPAlso fits Econo, Modernand Metalmaster.Commonly for cast iron.Replaces: 110-364RP(GF-210)ACTUAL SIZE: 3 5/8” X 3 5/8”

T-47BODY GASKETTO FIT TACO HC(GT-235)

ACTUAL SIZE: 4 7/�6” ODX 3 9/�6” ID

T-46BODY GASKET TO FITTACO HDH, 111, 113, 120Replaces: 120-009RP

ACTUAL SIZE: 4 �/4” ODX 3 ��/�6” ID

T-48BODY GASKET (O-RING) TOFIT TACO 006, 007 PUMPSReplaces: 007-003RP(GT-262)ACTUAL SIZE: � 3/8” OD

X � �5/�6” ID

T-49BODY GASKET (O-RING) TOFIT TACO 005, 008 PUMPSReplaces: 008-005RP(GT-263)ACTUAL SIZE: � 3/8” OD

X � �5/�6” ID

T-183BODY GASKET TO FITTACO 1600 SERIES PUMPSPart of #1600-170 (TP-415)Seal Kit.ACTUAL SIZE: 5 �/8” OD

X 4 3/4” ID

T-184BODY GASKET TO FITTACO 1600 SERIES PUMPSPart of #1600-170 (TP-415)Seal Kit.ACTUAL SIZE: 7 �/8” OD

X 6 �/�” ID

T-196BODY GASKET TO FITTACO 1600 SERIES PUMPSPart of #1600-170 (TP-415)Seal Kit.


T-287AFLANGE GASKET TO FITTACO 1400-52Also fits flange #194-2124 for 2” and #194-1543 for 1 1/2”.

ACTUAL SIZE: 5 5/8” X 3 5/8”



PARTS TO FIT ECONO & THRUSH

GASKET AND SHAFT TO FIT ECONO CIRCULATORS

TP-426SHAFT TO FIT ECONO CIRCULATORKnurled, Stainless Steel(RM-864)

E-26FLANGE GASKET TO FITECONO CIRCULATORS(GE-217)

ACTUAL SIZE: 3 5/8” X 3 5/8”

GASKETS TO FIT THRUSH CIRCULATOR

T-201AGASKET TO FIT THRUSHCIRCULATORReplaces: TJ-046-00A(K-1329)

ACTUAL SIZE: 3 �/�” X 3 �/�”

T-201BGASKET TO FIT THRUSHCIRCULATORReplaces: TJ-010-000(K-1360)

ACTUAL SIZE: 4” OD X 3” ID

T-201CGASKET TO FIT THRUSHCIRCULATORReplaces: TJ-001-00(K-1361)ACTUAL SIZE: 4 3/4” OD

X 3 ��/�6” ID

T-201DGASKET TO FIT THRUSHCIRCULATORReplaces: TJ-012-00A(K-1362)ACTUAL SIZE: 5 7/�6” OD

X 4” ID

T-201EGASKET TO FIT THRUSHCIRCULATORReplaces: TJ-001-00A(K-1363)ACTUAL SIZE: 4 �/�” OD

X 3 3/8” ID

T-201FGASKET TO FIT THRUSHCIRCULATORReplaces: TJ-043-000

ACTUAL SIZE: 4 3/4” ODX 4” ID

WATER SEALS TO FIT THRUSH CIRCULATOR

TP-417SEAL TO FIT THRUSHCIRCULATORHVCFits 7/16” Shaft

TP-418SEAL TO FIT THRUSHCIRCULATORGTFits 1/2” Shaft

COUPLERS TO FIT THRUSH ANDGLOBE CIRCULATORS

TP-437COUPLER TO FIT THRUSH CIRCULATORModel #261/2” x 7/16” Bore1 3/4” Long(RM-510)

TP-436COUPLER TO FITGLOBE CIRCULATOR1/2” x 1/2” Bore2” Long(RM-531)

GASKETS TO FIT SUNDSTRAND CIRCULATOR

S-283FLANGE GASKET TOFIT SUNDSTRANDCIRCULATORReplaces: 5478051(GS-157)ACTUAL SIZE: 4 3/�6” X � �/�”

S-283ABODY O-RING TO FITSUNDSTRAND CIRCULATORReplaces: 5479021(GS-158)ACTUAL SIZE: � 7/8” OD

X � 5/8” ID


S-283BO-RING TO FITSUNDSTRANDCIRCULATOR ROTOR(GS-159)ACTUAL SIZE: �” OD

X � 3/4” ID

S-283CGASKET TO FIT SUNDSTRAND CIRCULATOR INDICATORReplaces: 5477081(GS-161)

ACTUAL SIZE: � �/�6” ODX 7/8” ID

GASKETS TO FIT GRUNDFOS, WATTS

W-23GASKET TO FIT WATTSBACKFLOW PREVENTEROld Style9DACTUAL SIZE: � 3/8” OD X �” ID

W-22GASKET TO FIT WATTSPRESSURE REDUCINGVALVEOld Style ValveS1156F

ACTUAL SIZE: � 3/�6” ODX �3/�6” ID

W-22AGASKET TO FIT NEW STYLES OF WATTSPRESSURE REDUCINGVALVES AND BACKFLOWPREVENTERS1/2” S1156F1/2” 9DSM3

ACTUAL SIZE: � �/8” ODX ��/�6” ID

Please Note: The W-22A is used on the majority of backflow preventers and pressure reducing valves out in the field. A good strategy is to stock all three SSC nut gaskets to fit Watts, with a majority of W-22A.

GASKETS TO FIT WATTS

W-24BODY GASKET TO FITWATTS LOW WATERCUT-OFFUsed In: 93A, 89A,101A, 193A(GM-123)ACTUAL SIZE: 3 �/�6” X 3 �/�6”

W-25BODY GASKET TO FITWATTS CIRCULATORS(W-1000-G)

ACTUAL SIZE: 4 7/8” ODX 3 �5/�6” ID

GASKETS TO FIT GRUNDFOS

T-36FLANGE GASKET TO FITGRUNDFOS, TACO, B&G,ETC. CIRCULATORSSmooth Red Rubber(GF-219)

G-20ISOLATIONAL FLANGEGASKET TO FIT GRUNDFOSSHUT-OFF VALVEBlack Neoprene RubberSST-SFFits K-2197, K-2180 & K-2181 Flanges

ACTUAL SIZE: 3 7/8” X � 3/8”


G-20HVFLANGE GASKET TO FITGRUNDFOS HIGH VELOCITY(HV) PUMP FLANGESFits Flange #539615ACTUAL SIZE: � �/�” OD

X � �/8” ID


GASKET TO FIT VALLIANT BOILER

V-291BOTTOM RETURN YOKE FLANGE GASKET TO FITVALLIANT BOILER

See pages 73-77 for our line of Pressure, Vacuum and Compound Gauges. We also have Liquid Filled Gauges, Water Test Gauges, Fire Sprinkler Gauges, Gas Test Gauges, Low Pressure Diaphragm Gauges, Thermometers and Tridicators.


T-168Will Fit: Weil McLain 65-66-68-EG Steam, 76, 86, 88 Steam

ACTUAL SIZE: 6” X �0”

T-163Will Fit: Weil McLain 94 Supply Outlet

ACTUAL SIZE: 5 3/4” X �� /4”

T-157Will Fit: American ArcoleaderAmstel 32Burnham Jubilee 200, Patriot Freedom 6 VP-V3-PFCrown MontegoDunkirk Lexington, Lex Pak DFH.B. Smith OHB 13 WaterMemcoPeerless WBV WaterPortmar-Norse-DeltaTexaco WaterThermo Dynamics VTF, CWL, SWeil McLain Gold 65-66-68 SteamYork-Shipley Levitown Boiler

ACTUAL SIZE: 8” OD

T-156Will Fit: Burnham Fiesta FT, Fiesta II, Liberty, Yellow Jacket

ACTUAL SIZE: 8 �/�” X �� /�”

T-155Will Fit: Burnham V-1, V-7, V-9New Yorker CLW Water, CLS SteamACTUAL SIZE: 5” X �� /4”

T-158Will Fit: Crown Bon-Air ULT, BahamaDunkirk ULTUltimate ULTACTUAL SIZE: 6 �/4” X �� 3/4”

T-162Will Fit: Dunkirk 13 SteamH.B. Smith 50B SteamTexaco SteamUtica GUACTUAL SIZE: 6 �/�” X �7”

T-161Will Fit: Utica Starfire OU, UST

ACTUAL SIZE: 5 �/4” X �3 �/�”

T-164Will Fit: Utica POBT, B-C, STS, Starfire II-III SteamACTUAL SIZE: 6 �/�” X �0 �/�”

T-166Will Fit: Peerless JO-JOT (PE)

ACTUAL SIZE: 6 �/4” X �4 �/4”

T-157BWill Fit: Peerless ECT Side Coil, WBV Steam

ACTUAL SIZE: 5 �/�6” X 9 �5/�6”

T-165Will Fit: Trianco TR

ACTUAL SIZE: 7 �/�” X 7 �/�”T-157AWill Fit: Peerless JO-JOT (PF), LC, WB

ACTUAL SIZE: 8 �/4” ODX 6” ID

TANKLESS HEATER GASKETSMost SSC tankless heater gaskets are available in the following materials: Red Rubber, Neoprene (black rubber) and EPDM which is black rubber of high quality - excellent for higher heat and steam applications. Please see our price list or website for details.

Outside measurements are used.

TANKLESS HEATER GASKETS

T-159Will Fit: New Yorker AP580, 660, I-224, V295, 112, 125ACTUAL SIZE: 4” X 9 �/�”

T-160Will Fit: New Yorker NY

ACTUAL SIZE: 7” X 8”

T-160AWill Fit:Burnham RSANew Yorker 6 & 10 Bolt Hole

ACTUAL SIZE: 8 �/4” X 7 �/�”

T-167Will Fit: Gilbralter Rectangular

ACTUAL SIZE: 5 �/4” X �3”

Check out our Tankless Heater Gasket cross reference chart on page 49.



T-175Will Fit: Burnham RSM, RS

ACTUAL SIZE: 6” X ��”

T-170Will Fit: H.B. Smith FD-12

ACTUAL SIZE: 7 3/4” X 7 3/4”

T-172Will Fit: H.B. Smith SS

ACTUAL SIZE: 6 �/�” X ��”

T-174Will Fit: Crane 15-26Crown Energy Pak (CEP)Hydrotherm VO-WT WaterKoven-V&E-Pietro-O.B.N.ACTUAL SIZE: 6” OD

T-169Will Fit: American V-3, A-3, FRA-3, PFA-3, G-2, G-40Burnham Jubilee 100, Holiday 6-72 Gas, Pacemaker Holiday 60-61Columbia GSFHCrane 2-8-111-12, 202, 300, 302Crown TobagoGilbralterHydrotherm AquariusNational-U.S. 17-18, 70-101-109- 209-300Slant Fin Vantage II, Futura, Liberty WaterThatcher G-OPUtica Starfire II Water STWValliant VAWeil McLain 65-66-68 EG Eater, 42-62 Water

ACTUAL SIZE: 7 - 7 �/�” OD

T-171Will Fit: Slant Fin Liberty Steam (LS)

ACTUAL SIZE: 8 �/8” X �5 5/�6”

T-173Will Fit: National-U.S. Sunray 4-19Thatcher O.C. T-194-198ACTUAL SIZE: 6 �/�” X �7 �/�”

T-176Will Fit: Federal GFS & SDF

ACTUAL SIZE: 7 3/8” X 7 5/8”

T-176AWill Fit: Federal FVW


T-177Will Fit: Thermo Dynamics CWL

ACTUAL SIZE: 6” X �3 3/8”

T-902Will Fit: American Arcoliner Wide Back

ACTUAL SIZE: 6 �/�” X 7 3/4”

T-903Will Fit: American A-5, FRA-5 Water OnlyACTUAL SIZE: 4 �/�” X �4 �/�”

T-904Will Fit: American Exbrook

ACTUAL SIZE: �0” X �3 �/�”

T-905Will Fit: American G-10 - Water Only


T-906Will Fit: American Oakmont 8-11 - Cast Iron Shell

ACTUAL SIZE: 8” X �9 �/�”

T-908Will Fit: American Severn - Extended Shell

ACTUAL SIZE: 7 �/�” X �3 �/�”

T-909Will Fit: Burnham Holiday 70-80-81, Packing FR

ACTUAL SIZE: �0 �/�” DIAMETER

If we are missing the gasket you need, let us know and we’ll tool up for it.


T-910Will Fit: Burnham PF-5, American PFA-5

ACTUAL SIZE: 5 3/4” X ��”

T-911Will Fit: Burnham V11

ACTUAL SIZE: 6 3/�6” X �� 3/8”

T-912Will Fit: Burnham Yellow Jacket


T-914Will Fit: Crown Kingston

ACTUAL SIZE: 5” X �� /4”

T-915Will Fit: Delco DB 3-4-5 Shell Type

ACTUAL SIZE: 8 3/4” X �0”

T-916Will Fit: Delco DB 3-4-5 Shell Type


T-917Will Fit: H.B. Smith Series 8 Steam - 4 or 5 GPM only

ACTUAL SIZE: 7 �/4” X 7 �/4”

T-918Will Fit: H.B. Smith 28 Steam Boilers

ACTUAL SIZE: 7 �/�” X 8 �/�”

T-919Will Fit: H.B. Smith 18-19 Series


T-920Will Fit: H.B. Smith 1100-1500 Flange Type

ACTUAL SIZE: 6 �/�” X �6”

T-921Will Fit: H.B. Smith OB-14, BB-14

ACTUAL SIZE: ��” OD


T-922Will Fit: Hydrotherm OS-SO2


T-923Will Fit: Hydrotherm VOA - Steam, VGA

ACTUAL SIZE: 5 �/4” X �� /4”

T-924Will Fit: National - U.S.-2-9-16-16C- 20-25-28-32-Cast Iron Shell

ACTUAL SIZE: 8 �/4” X �0”

T-925Will Fit: National - U.S.-10-15-27-37- 47, 100-200-300-400Crane 21-31-41

T-926Will Fit: National - U.S.-109SS-SW, 200SS-SWCrane 20255-SW

ACTUAL SIZE: 7 3/4” X �5 3/4”

T-927Will Fit: Crane 15-26

ACTUAL SIZE: 6” OD

T-928Will Fit: National - U.S.-12-12W Flange Type

ACTUAL SIZE: 7” X �� /�”



T-929Will Fit: National - U.S. - Sunray 1-3-46

ACTUAL SIZE: 6 �/�” X �6 �/4”

T-930Will Fit: Crane 14-20

ACTUAL SIZE: 7 �/�” X �3 �/�”

T-931Will Fit: Crane 16


T-932Will Fit: National - U.S. - Crane 73, 70SS-SW

ACTUAL SIZE: 5 �/�” X �� /�”

T-933Will Fit: National - U.S. - Crane 80

ACTUAL SIZE: �� 3/4” OD

T-935Will Fit: Peerless HEO Steam or Water

ACTUAL SIZE: 7 �/4” X ��”

T-937Will Fit: Peerless WBV Steam

ACTUAL SIZE: 5 9/�6” X 9 7/8”

T-938Will Fit: Rheem G-O-PORichmond RWA, H-WFD-R- RW-PRACTUAL SIZE: 5 �/4” X �3 �/�”

T-939Will Fit: Rheem G-O-PORichmond RWA, H-WFD-R- RW-PRACTUAL SIZE: 5 �/4” X �5 �/�”

T-940Will Fit: Slant Fin Galaxy Malibu

ACTUAL SIZE: 8 3/4” X �5 3/4”

T-941Will Fit: Slant Fin 78


T-942Will Fit: Thatcher 015 Thru 020

ACTUAL SIZE: 6” X �0 �/4”

T-943Will Fit: Thatcher 56 Series


T-944Will Fit: Thatcher 525 Series

ACTUAL SIZE: 6 �/4” X �4 �/4”

T-946Will Fit: Weil McLain 80, 78 Series

ACTUAL SIZE: 5 �/4” X �0 �/8”

T-947Will Fit: Weil McLain LG Steam


T-948Will Fit: Weil McLain E Steam Boilers

ACTUAL SIZE: 5 3/4” X �0 3/4”

T-949Will Fit: Weil McLain 62 Steam

ACTUAL SIZE: 5 �/4” X 8 3/4”

T-950Will Fit: Weil McLain 57-77, 78-B5 Cast Iron Shell


T-951Will Fit: Weil McLain 72-73

ACTUAL SIZE: 6 �/4” X �0 �/4”


T-952Will Fit: Weil McLain 82-84


T-953Will Fit: Weil McLain OB-15

ACTUAL SIZE: 5 �/4” X �� 3/4”

T-954Will Fit: Weil McLain OB-18

ACTUAL SIZE: 5 �/4” X �3 �/�”

T-955Will Fit: Weil McLain 92-94K

ACTUAL SIZE: 5 3/4” X 7”

T-956Will Fit: Weil McLain H Gas

ACTUAL SIZE: 8 �/�” X �0”

T-957Will Fit: Williams-Winkler-Stewart Warner Oilomatic

ACTUAL SIZE: 6 �/4” X �4 �/4”

T-958Will Fit: Williams-Winkler-Stewart Warner Oilomatic

ACTUAL SIZE: 6 �/4” X �7 �/�”

T-959Will Fit: Crotty


T-960Will Fit: Zambelli

ACTUAL SIZE: 6 �/4” X �3 �/�”

T-961Will Fit: Gent-Janitor


T-962Will Fit: Diesel-Plymouth


T-963Will Fit: Edwards


T-964Will Fit: Federal FC-FD-FLR-FM- FCA-FM2Portmar-WindsorACTUAL SIZE: 6” X �7”

T-965Will Fit: Fitzgibbons 400Chrysler AirtempPercoflashACTUAL SIZE: 4 3/8” X �3”

T-967Will Fit: Iron FiremanFairbanks MorseUtica-Torrid HeatACTUAL SIZE: 6” X �6 �/�”

T-968Will Fit: Kewanee R


T-969Will Fit: Kewanee 3R

ACTUAL SIZE: 6 �/4” X �5 �/�”

T-970Will Fit: Kewanee 83R

ACTUAL SIZE: 6 �/4” X �5 �/�”

T-971Will Fit: KovenDelcoParagon V&EACTUAL SIZE: 6 �/�” X �3 �/�”


All of our Tankless Gaskets are available in Red Rubber, Neoprene Rubber & EPDM Rubber. Please see our price list or website for details.



T-972Will Fit: Koven Deluxe


T-973Will Fit: National-Pacific Series 200 Thru 700

ACTUAL SIZE: 5 �/�” X �7 �/4”

T-974Will Fit: Percoflash

ACTUAL SIZE: 5 3/4” X �3 �/�”

T-975Will Fit: Fitzgibbons RZU JUR-80- 200-400


T-977Will Fit: Columbia GEM


T-978Will Fit: Axeman Anderson AA


T-979Will Fit: Axeman Anderson PVT

ACTUAL SIZE: 4” X 8 �/8”

T-980Will Fit: Burnham CB, PENN


T-982Will Fit: Columbia Emerald

ACTUAL SIZE: 7” X �� /4”

T-984Will Fit: Cast Iron Boilers - 16 Bolts


T-985Will Fit: Hydrotherm PB150-180 Water

ACTUAL SIZE: 7 3/4” X 7 3/4”

T-986Will Fit: Hydrotherm PB150-180 Steam

ACTUAL SIZE: 7 �/4” X 7 �/4”

T-988Will Fit: Trianco TOC


TANKLESS HEATER BOLT AND NUT

T-178BTANKLESS HEATER BOLT

T-178NTANKLESS HEATER NUTBrass

TANKLESS HEATER GASKET SHEETS

Specifically sized for replacing gaskets on tankless heaters, these packages of gasketing material are rolled and bagged or shrink-wrapped for protection. Red Rubber, Neoprene and EPDM are the materials to choose from.

SSC# MATERIAL SIZEGS-3EGS-3FGS-�0TAGS-�0TBGS-�0TCGS-�0TDGS-��JGS-��KGS-��LGS-��M

RED RUBBERRED RUBBERNEOPRENENEOPRENENEOPRENENEOPRENE

EPDMEPDMEPDMEPDM

��” x �4” x �/8” TH�8” x 36” x �/8” TH��” x �4” x �/8” TH��” x �4” x �/4” TH�8” x 36” x �/8” TH�8” x 36” x �/4” TH��” x �4” x �/8” TH��” x �4” x �/4” TH�8” x 36” x �/8” TH�8” x 36” x �/4” TH

Check out our Tankless Heater Gasket cross reference chart on page 49.


TANKLESS GASKETS CROSS REF. CHART

KOVEN KOVEN-DELCO-PARAGON V&E T-97� KOVEN KOVEN-DELUXE T-97� KOVEN KOVEN-V&E-PIETRO-O.B.N. T-�74 MEMCO MEMCO T-�57 NATIONAL NATIONAL-U.S. SUNRAY 4-�9 T-�73 NATIONAL-PACIFIC NATIONAL-PACIFIC SERIES �00 THRU 700 T-973 NATIONAL-U.S. CRANE �5-�6 T-9�7 NATIONAL-U.S. NATIONAL-U.S. �7-�8, 70-�0�-�09-�09-300 T-�69 NATIONAL-U.S. NATIONAL-U.S.-�0-�5-�7-37-47, �00-�00-300-400; T-9�5 CRANE ��-3�-4� NATIONAL-U.S. NATIONAL-U.S.-�09SS-SW, �00SS-SW, T-9�6 CRANE �0�55-SW NATIONAL-U.S. NATIONAL-U.S.-��-��W FLANGE TYPE T-9�8 NATIONAL-U.S. NATIONAL-U.S.-�-9-�6-�6C-�0-�5-�8-3�- T-9�4 CAST IRON SHELL NATIONAL-U.S. NATIONAL-U.S.-SUNRAY �-3-46 T-9�9 NATIONAL-U.S.-CRANE NATIONAL-U.S.-CRANE-73, 70SS-SW T-93� NATIONAL-U.S.-CRANE NATIONAL-U.S.-CRANE-80 T-933 NEW YORKER NEW YORKER AP580, 660, I-��4, V�95,��, ��5 T-�59 NEW YORKER NEW YORKER CLW-WATER, CLS STEAM T-�55 NEW YORKER NEW YORKER NY T-�60 PEERLESS PEERLESS JO-JOT (PE) T-�66 PEERLESS PEERLESS ECT SIDE COIL, WBV STEAM T-�57B PEERLESS PEERLESS HEO STEAM OR WATER T-935 PEERLESS PEERLESS JO-JOT (PF), LC, WB T-�57A PEERLESS PEERLESS WBV STEAM T-937 PEERLESS PEERLESS WBV WATER T-�57 PERCOFLASH PERCOFLASH-5 3/4" X �3 �/�" T-974 PORTMAR-NORSE-DELTA PORTMAR-NORSE-DELTA T-�57 RHEEM / RICHMOND RHEEM-G-O-PO, RICHMOND-RWA, T-938 H-WFD-R-RW-PR-5 �/4"x�3 �/�" RHEEM / RICHMOND RHEEN-G-O-PO, RICHMOND-RWA, T-939 H-WFD-R-RW-PR-5 �/4"x�5 �/�" SLANT FIN SLANT FIN 78 T-94� SLANT FIN SLANT FIN GALAXY MALIBU T-940 SLANT FIN SLANT FIN LIBERTY STEAM-LS T-�7� SLANT FIN SLANT FIN VANTAGE II, FUTURA, T-�69 LIBERTY WATER TEXACO TEXACO STEAM T-�6� TEXACO TEXACO WATER T-�57 THATCHER THATCHER O.C. T-�94-�98 T-�73 THATCHER THATCHER 0�5 THRU 0�0 T-94� THATCHER THATCHER 5�5 SERIES T-944 THATCHER THATCHER 56 SERIES T-943 THATCHER THATCHER G-OP T-�69 THERMO DYNAMICS THERMO DYNAMICS CWL T-�77 THERMO DYNAMICS THERMO DYNAMICS VTF, CWL, S T-�57 TRIANCO TRIANCO TOC T-988 TRIANCO TRIANCO TR T-�65 ULTIMATE ULTIMATE ULT T-�58 UTICA UTICA GU T-�6� UTICA UTICA POBT, B-C, STS, STARFIRE II-III STEAM T-�64 UTICA UTICA STARFIRE II WATER STW T-�69 UTICA UTICA STARFIRE OU, UST T-�6� VALLIANT VALLIANT VA T-�69 WEIL MCLAIN WEIL-MCLAIN 65-66-68 EG EATER; 4�-6�-WATER T-�69 WEIL MCLAIN WEIL-MCLAIN 65-66-68-EG STEAM, 75, 86, 88 T-�68 STEAM WEIL MCLAIN WEIL-MCLAIN 94 SUPPLY OUTLET T-�63 WEIL MCLAIN WEIL-MCLAIN GOLD 65-66-68 STEAM T-�57 WEIL MCLAIN WEIL-MCLAIN 57-77, 78-B5-CAST IRON SHELL T-950 WEIL MCLAIN WEIL-MCLAIN 6� STEAM T-949 WEIL MCLAIN WEIL-MCLAIN 7�-73 T-95� WEIL MCLAIN WEIL-MCLAIN 80, 78 SERIES T-946 WEIL MCLAIN WEIL-MCLAIN 8�-84 T-95� WEIL MCLAIN WEIL-MCLAIN E STEAM BOILERS T-948 WEIL MCLAIN WEIL-MCLAIN H-GAS T-956 WEIL MCLAIN WEIL-MCLAIN LG STEAM T-947 WEIL MCLAIN WEIL-MCLAIN OB �8 T-954 WEIL MCLAIN WEIL-MCLAIN OB-�5 T-953 WEIL MCLAIN WEIL-MCLAIN-9�-94K T-955 WILLIAMS WINKLER WILLIAMS-WINKLER STEWART WARNER T-957 OILOMATIC-6 �/4"x�4 �/4" WILLIAMS WINKLER WILLIAMS-WINKLER STEWART WARNER T-958 OILOMATIC-6 �/4"x�7 �/�" YORK-SHIPLEY YORK-SHIPLEY LEVITOWN BOILER T-�57 ZAMBELLI ZAMBELLI T-960

FITS OEM TANKLESS HEATER MODEL SSC# FITS OEM TANKLESS HEATER MODEL SSC#AMERICAN AMERICAN A-5, FRA-5-WATER ONLY T-903 AMERICAN AMERICAN ARCOLEADER T-�57 AMERICAN AMERICAN ARCOLINER WIDE BACK T-90� AMERICAN AMERICAN EXBROOK T-904 AMERICAN AMERICAN G-�0-WATER ONLY T-905 AMERICAN AMERICAN OAKMONT 8-��-CAST IRON SHELL T-906 AMERICAN AMERICAN PFA-5 T-9�0 AMERICAN AMERICAN SEVERN-EXTENDED SHELL T-908 AMERICAN AMERICAN V-3, A-3, FRA-3, PFA-3, G-�, G-40 T-�69 AMSTEL AMSTEL 73� T-�57 AXEMAN ANDERSON AXEMAN ANDERSON AA T-978 AXEMAN ANDERSON AXEMAN ANERSON PVT T-979 BURNHAM BURNHAM CB, PENN T-980 BURNHAM BURNHAM FIESTA FT, FIESTA II, LIBERTY, T-�56 YELLOW JACKET BURNHAM BURNHAM HOLIDAY 70-80-8�, PACKING FR T-909 BURNHAM BURNHAM JUBILEE �00, HOLIDAY 6-7� GAS, T-�69 PACEMAKER HOLIDAY 60-6� BURNHAM BURNHAM JUBILEE �00, PATRIOT FREEDOM T-�57 6 VP-V3-PF BURNHAM BURNHAM PF-5 T-9�0 BURNHAM BURNHAM RSA, NEW YORKER 6&�0 BOLT HOLE T-�60A BURNHAM BURNHAM RSM, RS T-�75 BURNHAM BURNHAM V�� T-9�� BURNHAM BURNHAM VI, V-7, V-9 T-�55 BURNHAM BURNHAM YELLOW JACKET T-9�� CAST IRON BOILERS CAST IRON BOILERS-�6 BOLTS T-984 COLUMBIA COLUMBIA EMERALD T-98� COLUMBIA COLUMBIA GEM T-977 COLUMBIA COLUMBIA GSFH T-�69 CRANE CRANE �4-�0 T-930 CRANE CRANE �5-�6 T-�74 CRANE CRANE �6 T-93� CRANE CRANE �-8-��-��, �0�, 300, 30� T-�69 CROTTY CROTTY T-959 CROWN CROWN BON-AIR ULT, BAHAMA T-�58 CROWN CROWN ENERGY PAK (CEP) T-�74 CROWN CROWN KINGSTON T-9�4 CROWN CROWN MONTEGO T-�57 CROWN CROWN TOBAGO T-�69 DELCO DELCO DB 3-4-5-SHELL TYPE T-9�5 DIESEL-PLYMOUTH DIESEL-PLYMOUTH T-96� DUNKIRK DUNKIRK �3 STEAM T-�6� DUNKIRK DUNKIRK LEXINGTON & LEX PAK DF T-�57 DUNKIRK DUNKIRK ULT T-�58 EDWARDS EDWARDS T-963 FEDERAL FEDERAL FC-FD-FLR-FM-FCA-FM�, T-964 PORTMAR-WINDSOR FEDERAL FEDERAL FVW T-�76A FEDERAL FEDERAL GFS & SDF T-�76 FITZGIBBONS FITZGIBBONS 400, CHRYSLER AIRTEMP, T-965 PERCOFLASH FITZGIBBONS FITZGIBBONS RZU JUR-80-�00-400 T-975 GENT-JANITOR GENT-JANITOR T-96� GILBRALTER GILBRALTER T-�69 GILBRALTER GILBRALTER RECTANGULAR T-�67 H.B. SMITH H.B. SMITH ��00-�500 FLANGE TYPE T-9�0 H.B. SMITH H.B. SMITH �8-�9 SERIES T-9�9 H.B. SMITH H.B. SMITH �8 STEAM BOILERS T-9�8 H.B. SMITH H.B. SMITH 50B STEAM T-�6� H.B. SMITH H.B. SMITH FD-�� T-�70 H.B. SMITH H.B. SMITH OB-�4, BB-�4 T-9�� H.B. SMITH H.B. SMITH OHB �3 WATER T-�57 H.B. SMITH H.B. SMITH SERIES 8 STEAM-4 OR 5 GPM ONLY T-9�7 H.B. SMITH H.B. SMITH SS T-�7� HART & CROUSE HART & CROUSE-BRYANT COMPACT T-9�6 �30-�3�-�34 HYDROTHERM HYDROTHERM AQUARIUS T-�69 HYDROTHERM HYDROTHERM OS-S0� T-9�� HYDROTHERM HYDROTHERM PB�50-�80 STEAM T-986 HYDROTHERM HYDROTHERM PB�50-�80 WATER T-985 HYDROTHERM HYDROTHERM VOA-STEAM, VGA T-9�3 HYDROTHERM HYDROTHERM VO-WT WATER T-�74 IRON FIREMAN IRON FIREMAN, FAIRBANKS MORSE, T-967 UTICA-TORRID HEAT KEWANEE KEWANEE 3R T-969 KEWANEE KEWANEE 83R T-970 KEWANEE KEWANEE R T-968


DIRT POCKET CAP AND KIT

SSC-300DIRT POCKET CAP WITHGASKET AND BOLTSTO FIT MCDONNELL &MILLERCast Iron; 3/4” NPTPart #: 309510Used In: 47, 67(RM-889)

BOXED WITH GASKET AND4 HEXHEAD SCREWS

SSC-300ABLOWDOWN KITReplaces: 14B

PARTS TO FIT MCDONNELL & MILLER

SSC’s Blowdown Kit to fit McDonnell & Miller low water cut-offs contains one Dirt Pocket Cap boxed with gasket and 4 hexhead screws, one 3/4” ball valve (full port) and one 3/4” Nipple (4” long).

PACKED IN A ZIP-LOCK BAG WITH LABEL

MP-294BOLT TO FIT MCDONNELL& MILLER DIRT POCKETCAP AND STRAINER BASKET ASSEMBLYCatalog #: 37-134Part #: 313650Used In: 21, 25A, 27,47, 51, 53, 3155, 67,70, 101A

TUBE, NUT AND KIT TO FIT MCDONNELL & MILLER®

Please Note: McDonnell & Miller is a registered trademark of ITT Corporation

MP-297BRASS TUBE TO FIT MCDONNELL & MILLERCatalog #: 66-35Part #: 318300Used In: 67

MP-296BRASS COMPRESSION NUT TO FIT MCDONNELL & MILLERCatalog #: 66-133Part #: 318700Used In: 67

MP-299TUBE AND NUT KITTO FIT MCDONNELL& MILLERKit includes #MP-296and #MP-297.

MP-295BRASS TUBE TO FITMCDONNELL & MILLERFits Utica Oil Steam boilers.45o Angle

STRAINER BASKET ASSEMBLIESTO FIT MCDONNELL & MILLER

MP-290STRAINER BASKETASSEMBLY TO FITMCDONNELL & MILLERCatalog #: SA101-38Part #: 347100Used In: 47, 51, 101

MP-291STRAINER BASKETASSEMBLY TO FITMCDONNELL & MILLERStrainer Height: 3 3/16”Catalog #: SA37-38Part #: 340700Used In: 51S, 53

BOXED WITH � M-38 GASKET AND 4 HEXHEAD SCREWS

This item features a cast iron base and pleated stainless steel mesh for more filtering area.

GASKETS TO FIT MCDONNELL & MILLER

M-38GASKET TO FIT MCD. & MLR.BLOW OFF VALVE, STRAINERBODY, DIRT POCKET CAPCatalog #: 37-39Part #: 313200Used In: 47, 53, 67, 70ACTUAL SIZE: � 3/8” X � 3/8”

M-154SQUARE CUT O-RINGTO FIT MCD. & MLR.Part #: 324435Used In: 21, 25A, 47,51, 53, 101A

ACTUAL SIZE: �” OD X � �3/�6” ID


M-39GASKET TO FITMCD. & MLR. HEADSpecifically designedfor raised flange heads.Catalog #: 150-14Part #: 325500Used In: 93, 193, 150(K-3508)

GASKETS TO FIT MCDONNELL & MILLER


M-39AGASKET TO FITMCD. & MLR. HEADSpecifically designedfor flat flange heads.Catalog #: 150-14Part #: 325400Used In: 93, 193, 150

ACTUAL SIZE: 4 �/4” ODX 3 3/�6” ID

M-40GASKET TO FITMCD. & MLR. BODYCatalog #: CO-12Part #: 302600Used In: 42, 61, 63,64, 65(K-3509)

ACTUAL SIZE: 5” ODX 3 3/8” ID

M-37GASKET TO FIT MCD. & MLR. FLOAT BODYCatalog #: 37-26Part #: 312700Used In: 47(GF-236)ACTUAL SIZE: 7 �/4” OD

X 6 5/�6” ID

M-35GASKET TO FITMCD. & MLR.Catalog #: F-26Part #: 304100Used In: 221, 25A51, 53, 3155ACTUAL SIZE: 7 7/8” OD

X 6 7/8” ID

M-33GASKET TO FIT MCD. & MLR. FLOATCatalog #: 67-12Part #: 318800Used In: 61, 64, 67,70, 80

ACTUAL SIZE: � 3/4” OD X � 9/�6” ID

M-34GASKET TO FITMCD. & MLR. HEADCatalog #: 69-112Part #: 320500Used In: 69ACTUAL SIZE: 3 �/8” OD

X � 9/�6” ID

M-12GASKET TO FIT MCD. &MLR. VALVE BRACKETCatalog #: 21-27Part #: 311100Used In: 21, 25A, 27ACTUAL SIZE: 3 �/8” OD

X � �/4” ID

M-11GASKET TO FIT MCD. & MLR. VALVE BRACKETCatalog #: 37-27Part #: 312800Used In: 47, 51, 53, 3155ACTUAL SIZE: � 7/8” OD

X � �/4” ID

M-9GASKET TO FITMCD. & MLR.Catalog #: CO-11Part #: 302500Used In: 63ACTUAL SIZE: � ��/�6” OD

X � 5/8” ID

M-14GASKET TO FITMCD. & MLR.Catalog #: 37-28Part #: 312900Used In: 53, 3155,21, 25A, 51

ACTUAL SIZE: � �5/�6” ODX � �/�6” ID

M-8GASKET TO FIT MCD. &MLR. BELLOWS BASECatalog #: 150-9Part #: 325300Used In: 42, 150ACTUAL SIZE: � 7/8” OD

X � �/8” ID

M-4GASKET TO FITMCD. & MLR. CAPCatalog #: 159-37Part #: 328900Used In: 42A, 47, 64A

ACTUAL SIZE: � 3/8” ODX 7/8” ID

Our replacement gaskets to fit McDonnell & Miller are made of a superior gasket material designed to keep a positive seal under the most strenuous temperatures and conditions. They are treated with an anti-stick coating for easy removal.


M-2GASKET TO FIT MCD.& MLR. SINGLE PROBESENSOR COVERPart #: 354370Used In: RS-1ACTUAL SIZE: 3 �/4” OD

X � �/�” ID

M-10GASKET TO FITMCD. & MLR.Catalog #: 21-12Part #: 310800Used In: 21ACTUAL SIZE: 3 5/�6” OD

X � 7/�6” ID

M-1GASKET TO FITMCD. & MLR. VAPORPROOF COVERPart #: 354380Used In: VFC, VFS,DFC, DFSACTUAL SIZE: 5 �/�” X 5 �/�”

M-146GASKET TO FITMCD. & MLR.Catalog #: 355-73Part #: 333800ACTUAL SIZE: 4 �/�” X 3 5/�6”

M-13GASKET TO FIT MCD. & MLR. 2, 3 & 4 PROBESENSOR COVERPart #: 354410Used In: PCLACTUAL SIZE: 3 �/�6” X 3 �/�6”

M-6GASKET TO FITMCD. & MLR. HEADCatalog #: 847-26Part #: 335400Used In: 21, 847, 851ACTUAL SIZE: 6 5/8” OD

X 4 3/4” ID

M-27GASKET TO FITMCD. & MLR. HEADPart #: 355081Used In: DFC, DFSACTUAL SIZE: 8 �5/�6” OD

X 5 �/�” ID

M-5GASKET TO FITMCD. & MLR.Catalog #: 27-T-13Part #: 312100Used In: 25AACTUAL SIZE: 3 5/8” OD

X � 5/8” ID

M-7GASKET TO FITMCD. & MLR. HEADCatalog #: 92-68Part #: 323300Used In: 94-194ACTUAL SIZE: 5 3/8” OD

X 3 ��/�6” ID

M-3GASKET TO FIT MCD. &MLR. PFC, VFC HEADPart #: 354310Used In: VFC, VFS, PFCACTUAL SIZE: 5 �/�” OD

X 3 �/4” ID

PIGTAIL STEAM SYPHONS

straiGht

PT-711STRAIGHT PIGTAIL STEAM SYPHONBlack Iron1/4” I.P.S.

PT-712STRAIGHT PIGTAILSTEAM SYPHONBrass1/4” I.P.S.

anGle

PT-714ANGLE (90O) PIGTAILSTEAM SYPHONBlack Iron1/4” I.P.S.

PT-715ANGLE (90O) PIGTAILSTEAM SYPHONBrass1/4” I.P.S.

GASKETS TO FIT MCD. & MLR. / PIGTAILS



STEAM GAUGE GLASS PARTS

5/8” GAUGE GLASS VALVE KITS

GG-2805/8” GAUGE GLASS VALVE KITFits 1/2” Pipe SizeIncludes:2 Valves With Needle Drain on Lower Valve2 Brass Nuts2 Brass Friction Rings2 Gauge Glass Gaskets2 Support Rods1 5/8” x 12” Gauge GlassWHOLE KIT IS BOXED

GG-281VALVES ONLY FOR 5/8” GAUGE GLASSSame as above exceptwithout gauge glass andsupport rods.PACKED PAIR/BOX

5/8” STANDARD, RED LINE &HIGH PRESSURE GAUGE GLASS

SSC# DESCRIPTION LENGTH PKG.GG-5�5AGG-5�5BGG-5�5CGG-5�5DGG-5�5EGG-5�5FGG-5�5GGG-5�5HGG-5�6AGG-5�6BGG-5�6CGG-5�6DGG-5�6EGG-5�6FGG-5�7AGG-5�7BGG-5�7C

5/8” STANDARD 5/8” STANDARD 5/8” STANDARD 5/8” STANDARD5/8” STANDARD 5/8” STANDARD 5/8” STANDARD 5/8” STANDARD 5/8” RED LINE5/8” RED LINE 5/8” RED LINE 5/8” RED LINE 5/8” RED LINE 5/8” RED LINE 5/8” HIGH PRESSURE5/8” HIGH PRESSURE5/8” HIGH PRESSURE

8”�0”��”��”�4”�8”�4”36”�0”��”�4”�8”�4”36”�0”��”�4”

STEAM GAUGE GLASS PARTS

G-193GAUGE GLASS GASKETREPLACEMENT KITContains:2 G-17 Gauge Glass Gaskets2 G-191 Brass Nuts2 G-192 Brass Friction Rings

AVAILABLE PACKED IN A HANGING BAG OR BOXED

GauGe Glass Gasket rePlaceMent kit

5/8” GauGe Glass Washer

G-175/8” GAUGE GLASSWASHER / GASKET

5/8” Brass friction rinG

G-192BRASS FRICTION RINGFOR 5/8” GAUGE GLASS

G-191BRASS NUT FOR5/8” GAUGE GLASS

5/8” Brass nut

suPPort rods

GG-28214” LONG STAINLESS STEEL SUPPORT ROD FOR 5/8” GAUGE GLASS(Order 2 For Set)

GG-282A24” LONG STAINLESS STEEL SUPPORT ROD FOR 5/8” GAUGE GLASS(Order 2 For Set)

��


MISCELLANEOUS STEAM PARTS

MarVel hiGh Pressure GauGe Glass Washers

SSC# TYPE SIZE OD DEPTHG-�85G-�85AG-�85BG-�85C

#3#7#��#53

5/8”3/4”3/4”3/4”

7/8”� �/4”� 3/�6”� �/4”

9/3�”�3/3�”�3/3�”�/�”

RADIATOR VALVES AND PARTS

radiator steaM and hot Water ValVes

STEAM VALVE HOT WATER VALVE

SSC# TYPE SIZE �08�05�08�06�08�07�08��0�08��08��4�08��6�08��8

RADIATOR HOT WATER VALVE-ANGLERADIATOR HOT WATER VALVE-ANGLERADIATOR HOT WATER VALVE-ANGLERADIATOR STEAM VALVE-ANGLERADIATOR STEAM VALVE-ANGLERADIATOR STEAM VALVE-ANGLERADIATOR STEAM VALVE-ANGLERADIATOR STEAM VALVE-ANGLE

BRASS

�/�”3/4”

�”�/�”3/4”

�”� �/4”� �/�”

coin / key air ValVe

CK-518COIN / KEYAIR VALVENickle Plated

radiator handle

108100THREE LUG RADIATOR HANDLEThree lugs will fit mostvalves in the field.Black Plastic

108130ECONOMY AIR VALVE1/8” IPS male threadconnection. Single fixed vent toward radiator with a maximum operating pressure of 5 PSI.

radiator air ValVe - 1/8” anGle

�” DIA. X 3” LONG

radiator (niPPle) sPud Wrench

111040RADIATOR SPUD WRENCH

key for coin / key air ValVe

RV-517RADIATOR VENT KEYNickle Plated

3 in 1 radiator rePair tool

1081033 IN 1 RADIATORREPAIR TOOL

This handy tool extracts broken air valves, retaps the radiator and rethreads air valves.

BRASS “Y” STRAINERS

SSC# SIZE��340��34��344��346��348��350��35�

3/8” IPS�/�” IPS3/4” IPS

�” IPS� �/4” IPS� �/�” IPS

�” IPS



•

•

•



AQUASTAT WELL ADAPTER

SSC’s Aquastat Well Adapter is made of heat conducting brass. This enables the service technician to replace obsolete Aquastats without replacing the existing well in the boiler. The W-603 fits existing wells of L444, L170, B6510 and L165. It also adapts to White-Rogers, Perfex and Detroit wells.

W-603AQUASTAT WELL ADAPTERBrass

siGht Glass to fit h.B. sMith Boiler

SG-507SIGHT GLASS TOFIT H.B. SMITHThickness: 1/4”

ACTUAL SIZE: � �/4” X � �/4”

siGht Glass to fit industrial coMBustion

SG-515SIGHT GLASS TO FITINDUSTRIAL COMBUSTIONBLAST TUBE SIGHT GLASSACTUAL SIZE: � �/�” X 4”

siGht Glasses to fit cleaVer Brooks



sliPnuts for Boiler siGht Glass circles

SN-5001 1/4” X 1 1/4” SLIPNUTFOR 1 1/4” SIGHT GLASS

SN-5011 1/2” X 1 1/4” SLIPNUTFOR 1 1/2” SIGHT GLASS

SN-5022” X 1 1/2” SLIPNUTFOR 2” SIGHT GLASS

ACTUAL SIZE: � �/8” ODX � �/�” ID

G-182SIGHT GLASS/SLIPNUTGASKET FOR 2”

G-181SIGHT GLASS/SLIPNUTGASKET FOR 1 1/2”

ACTUAL SIZE: � �/4” ODX � 5/�6” ID

BOILER SIGHT GLASSES

Boiler siGht Glass circles

SG-510SIGHT GLASS CIRCLEFOR 1 1/4” SLIPNUT

Our Boiler Sight Glass Circles are made of a 1/8” thick clear Pyrex glass which is capable of withstanding high temperatures.

SG-511SIGHT GLASS CIRCLEFOR 1 1/2” SLIPNUT

APPROXIMATE SIZE: � 7/�6” OD

APPROXIMATE SIZE: � ��/�6” OD

SG-512SIGHT GLASS CIRCLEFOR 2” SLIPNUT

APPROXIMATE SIZE: � 3/�6” OD

Boiler siGht Glass circle Gaskets

G-180SIGHT GLASS/SLIPNUTGASKET FOR 1 1/4”

ACTUAL SIZE: � �/�” ODX � 5/�6” ID

BOILER SIGHT GLASSES

Available in various thicknesses, SSC’s Gasket Sheets are perfect for emergency repairs and for replacing hard to find gaskets and washers. See pages 70-7�.


WELLS/MISCELLANEOUS STEAM GASKETS

W-590W-59�W-59�W-593W-594

W-595W-596

W-597W-597AW-597B

��3869A / ��37�A��37�L / ��387�A��37�B / ��3870A��37�M, N / ��387��555

��373�AA��4�99AA

�38�34C / �38�34E��387�E��555E

�/�”�/�”3/4”3/4”3/4”

�/�”3/4”

3/4”3/4”3/4”

3 �/8”3 �/8”3 �/8”3 �/8”3 �/8”

3 �/8”3 �/8”

3 �/8”3 �/8”3 �/8”

IMMERSION WELLS

SSC# HONEYWELL# TAP LGTH. DEPTH

� 5/8”3”

� 5/8”3”

4 �/4”

� 3/4”� 3/4”

� �/4”3”

4 �/4”

STANDARD STYLE

W-590 and W-592 are used on L4006, L6006, L8124, L8148, R8182.W-593 and W-594 are used on long insersion water heaters.

REMOTE ELEMENT WITH SET SCREW

DUAL ELEMENT

D-190GASKET TO FIT SMALL DYNATHERM NOZZLE ASSEMBLY

D-190AGASKET TO FIT LARGE DYNATHERMNOZZLE ASSEMBLY

GASKETS TO FIT DYNATHERM

D-190BGASKET TO FITLARGE DYNATHERMNOZZLE ASSEMBLY

ACTUAL SIZE: 3 5/8” OD X 3” ID

ACTUAL SIZE: 4 3/8” OD X 3 5/8” ID

ACTUAL SIZE: 7” X 4 �/4”

GASKET TO FIT ARMSTRONG / WATSON MCDANIEL BUCKET STEAM TRAP

M-195AGASKET TO FIT ARMSTRONG/WATSON MCDANIEL BUCKETSTEAM TRAPFits: Armstrong 800, 801, 860, 880; Part #: A1433Also Fits: Watson McDaniel 1031, 1041


GASKETS TO FIT ARMSTRONG FLOAT AND THERMOSTATIC STEAM TRAPS

A-288AGASKET TO FIT ARMSTRONG FLOAT AND THERMOSTATIC STEAM TRAPSFits Traps: 15B2, 15B3, 15B1-2, 15B1-3, 30B2, 30B-3, 30B1-2, 30B1-3Replaces #: A21348-1

ACTUAL SIZE: 5 �/8” X 4 �/4”

A-288BGASKET TO FIT ARMSTRONG FLOAT AND THERMOSTATIC STEAM TRAPSFits Traps: 15A3, 30A3, 75-A3, 125A3, 175A3Replaces #: A21958-1

ACTUAL SIZE: 4 3/8” X 3 �/4”

GASKET TO FIT VENT-RITE CONDENSATE PUMP

V-293BODY GASKET TO FITVENT-RITE CONDENSATE PUMP

ACTUAL SIZE: 8” OD X 6 3/8” ID

GASKETS TO FIT HOFFMAN TRAPS AND PUMPS

H-289ACOVER GASKET TOFIT HOFFMAN TRAPSFTH, FT1, B1, B2, B1030A, B11808,B1250A, B1075AReplaces: 604030ACTUAL SIZE: 5 3/8” X 3 �/�”

H-289B1 1/2” COVER GASKETTO FIT HOFFMAN TRAPReplaces: 601270

ACTUAL SIZE: 7 ��/�6” X 6 7/�6”

H-289CCOVER GASKET TO FIT HOFFMAN TRAP FTReplaces: 600345

ACTUAL SIZE: �0 �/8” X 6 5/8”

Well Adapter is on previous page.


DUNHAM BUSH GASKETS / O-RING CORD

If we are missing the gasket you need, let us know and we’ll tool up for it.

GASKETS TO FIT DUNHAM BUSH TRAPS AND PUMPS

D-151AGASKET TO FITDUNHAM BUSH TRAPFor 30-1A & 302AReplaces: C5698

ACTUAL SIZE: 4 �/�” X 3 3/4”

D-151BGASKET TO FIT DUNHAM BUSH TRAPFits: 1 1/4” or 1 1/2” TrapFor 40-515 & 40-715Replaces: D5449

ACTUAL SIZE: 5 �3/�6” X 5 �/�”

D-151CGASKET TO FITDUNHAM BUSH TRAPFits: 3/4” or 1” TrapFor 40-215 & 40-415Replaces: D5442

ACTUAL SIZE: 5 ��/�6” X 4 �5/�6”

D-151DGASKET TO FITDUNHAM BUSH TRAPFor 30-7 & 30-AReplaces: D263

ACTUAL SIZE: �� /8” X 8”

H-289EGASKET TO FIT HOFFMAN CONDENSATE TANK PUMPReplaces: DG0060

ACTUAL SIZE: 6 �/4” X 4”

H-289FVOLUTE BODY GASKETTO FIT HOFFMAN PUMPReplaces: DG0092


H-289DGASKET TO FITHOFFMAN601-A TRAPReplaces: 601273ACTUAL SIZE: 3 3/�6” OD

X � �/�” ID

D-151EGASKET/SHIM TO FIT DUNHAM BUSH OIL PUMPFor Models H-100/200/300Thickness: .003”

ACTUAL SIZE: 5 7/8” X 4”

D-151HGASKET/SHIM TO FIT DUNHAM BUSH OIL PUMPFor Models H-100/200/300Thickness: .004”

D-151GASKET TO FIT DUNHAMBUSH A5 PUMPReplaces: D5352ACTUAL SIZE: 7 ��/�6” OD

X 5 �/4” ID

D-151FFRONT GASKET TO FIT DUNHAM BUSH A5 PUMPACTUAL SIZE: � 7/8” OD

X � �3/�6” ID

O-RING CORD

Priced by the foot, O-ring cord is handy to have in case you have to make emergency O-rings in the field.

SSC# DIAMETER SSC# DIAMETEROC-7000OC-7000AOC-700�OC-700�AOC-700�OC-7004OC-7005

�/�6” 3/3�”�/8”

5/3�”3/�6”�/4”

9/3�”

OC-7006OC-7008OC-70�0OC-70��OC-70�4OC-70�6

5/�6”3/8”

7/�6”�/�”

.535”9/�6”

O-RING CORD INSTANT ADHESIVE

Use this adhesive to bond together O-rings. It’s good to have on hand in case you don’t have the right O-ring in stock. Sold in 3 gram tubes.

OCAD-7025O-RING CORD INSTANT ADHESIVE3 Gram Tube

D-151GGASKET/SHIM TO FIT DUNHAM BUSH OIL PUMPFor Models H-100/200/300Thickness: 1/64”


BOILER HANDHOLE / MANHOLE GASKETS

BOILER HANDHOLE & MANHOLE GASKETS - DIE CUT

All SSC Boiler Gaskets are made of 1/4” thick EPDM Rubber. Whether using SSC’s Boiler Gaskets or someone else’s, always make sure the material is 1/4” EPDM rubber. EPDM has excellent resistance to steam and high temperature, while other types of rubber may not.

SSC# SIZE TYPE

oBround - “oB”

HH-�0�BHH-�03BHH-�04BHH-�05BHH-�07BHH-�08BHH-��0BHH-��B

HH-��BHH-��4B

HH-��5BHH-��6BHH-��7BHH-��8BHH-��9BHH-��0BHH-��BHH-��BHH-��3BHH-��5BHH-��8BMH-�30BMH-�3�B

�” x 3” x 3/8” OB� �/4” x 3 �/4” x �/�” OB� �/�” x 3 �/�” x �/�” OB� �/4” x 3 3/4” x �/�” OB� �/�” x 3 3/4” x �/�” OB� 3/4” x 3 �/�” x �/�” OB� 3/4” x 3 3/4” x �/�” OB� 3/4” x 4 �/�” x �/�” OB3” x 4 �/4” x �/�” OB3” x 4” x �/�” OB3” x 4 �/�” x 9/�6” OB3 �/4” x 4 �/4” x 9/�6” OB3” x 5” x 9/�6” OB3 �/4” x 4 �/�” x �/�” OB3 �/4” x 4 3/4” x �/�” OB3 �/�” x 4 �/�” x �/�” OB3 �/�” x 5” x 9/�6” OB3 �/�” x 5 �/�” x 5/8” OB4” x 5” x �/�” OB4” x 6” x 3/4” OB4 �/�” x 5 �/�” x 5/8” OB4 �/�” x 6 �/�” x 5/8” OB5” x 7” x �/�” OB��” x �5” x � �/4” OB��” x �6” x � �/�” OB

HANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLE

MANHOLEMANHOLE

round - “r”

SSC# SIZE TYPEHH-�0�RHH-�03RHH-�04RHH-�07RHH-��0RHH-��RHH-��5RHH-��6RHH-�34PHH-�35P

� �/�” x �/�” TH ROUND� 3/4” x �/�” TH ROUND3” x �/�” TH ROUND3 �/4” x �/�” TH ROUND3 �/�” x �/�” TH ROUND4” x �/�” TH ROUND4 �/�” x �/�” TH ROUND5” x �/�” TH ROUND3 5/8” x 4 3/4” x �/�” PEAR4” x 5 �/�” PEAR

HANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLE

Pear - “P”

[ - Gaskets marked with this symbol will fit both sizes listed.

Please Note: Inside measurements are used.

[

[

elliPtical - “e”

SSC# SIZE TYPEHH-�EHH-4EHH-7EHH-8E

HH-9EHH-�0E

HH-��EHH-�4EHH-�7EHH-�8EHH-�0EHH-��EHH-�3EHH-�6EHH-�7EHH-�8EHH-3�EHH-3�EHH-33EHH-35EHH-39EHH-40EHH-4�EHH-44EHH-45EHH-46EHH-47EHH-50EMH-56EMH-63EMH-67E

MH-69EMH-75E

MH-80E

MH-8�EMH-83EMH-84E

�” x 3” x 3/8” E� �/4” x 3 �/4” x �/�” E� �/�” x 3 �/�” x �/�” E� �/�” x 3 3/4” x �/�” E� 3/4” x 3 �/�” x �/�” E� 3/4” x 3 3/4” x �/�” E� 7/8” x 3 7/8” x �/�” E3” x 3 3/4” x �/�” E� 3/4” x 4 �/�” x �/�” E3” x 4” x �/�” E3” x 4 �/�” x �/�” E3” x 5” x �/�” E3 �/4” x 4 �/4” x �/�” E3 �/4” x 4 �/�” x �/�” E3 �/4” x 5” x 9/�6” E3 �/�” x 4 �/�” x �/�” E3 �/�” x 4 �/�” x 5/8” E3 �/�” x 5” x �/�” E3 �/�” x 5 �/�” x 5/8” E3 3/4” x 4 3/4” x �/�” E3 3/4” x 5 �/�” x �/�” E4” x 5” x 5/8” E4” x 6” x 3/4” E4 �/�” x 5 �/�” x �/�” E4 �/�” x 6 �/�” x 9/�6” E5” x 6” x 5/8” E5” x 7” x 9/�6” E5 3/4” x 7 �/4” x 9/�6” E6” x 8” x 3/4” E6” x �0” x 5/8” E9” x �4” x � �/4” E�0” x �4” x � �/�” E�0 �/�” x �4 �/�” x � 3/8” E�0” x �5” x � 3/8” E��” x �4 �/�” x �” E��” x �5” x � �/4” E�0” x �6” x � �/4” E��” x �6” x � �/4” E��” x �5” x � �/4” E��” x �6” x � �/4” E��” x �6” x � 3/8” E�4” x �8” � �/�” E

HANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLEHANDHOLE

MANHOLEMANHOLEMANHOLEMANHOLEMANHOLEMANHOLEMANHOLEMANHOLEMANHOLEMANHOLEMANHOLEMANHOLE

[

[

[

[

[

Inside measurements are used.



PIPE FLANGE GASKETS

PIPE FLANGE GASKETS

For 150 lb. flanges and fittings. Old standard or new ANSI. Inside measurements are used.

Material: 1/8” thick red ruBBer

SIZE RING GASKET FULL FACE GASKET�/�3/4�� /4� �/�� /�33 �/�44 �/�5678�0��

PF-50RR8PF-75RR8PF-�00RR8PF-��5RR8PF-�50RR8PF-�00RR8PF-�50RR8PF-300RR8PF-350RR8PF-400RR8PF-450RR8PF-500RR8PF-600RR8PF-700RR8PF-800RR8PF-�000RR8PF-��00RR8

PF-50RF8PF-75RF8PF-�00RF8PF-��5RF8PF-�50RF8PF-�00RF8PF-�50RF8PF-300RF8PF-350RF8PF-400RF8PF-450RF8PF-500RF8PF-600RF8PF-700RF8PF-800RF8PF-�000RF8PF-��00RF8

Material: 1/16” thick red ruBBerSIZE RING GASKET FULL FACE GASKET�/�3/4�� /4� �/�� /�33 �/�44 �/�5678�0��

PF-50RR�6PF-75RR�6PF-�00RR�6PF-��5RR�6PF-�50RR�6PF-�00RR�6PF-�50RR�6PF-300RR�6PF-350RR�5PF-400RR�6PF-450RR�6PF-500RR�6PF-600RR�6PF-700RR�6PF-800RR�6PF-�000RR�6PF-��00RR�6

PF-50RF�6PF-75RF�6PF-�00RF�6PF-��5RF�6PF-�50RF�6PF-�00RF�6PF-�50RF�6PF-300RF�6PF-350RF�6PF-400RF�6PF-450RF�6PF-500RF�6PF-600RF�6PF-700RF�6PF-800RF�6PF-�000RF�6PF-��00RF�6

Material: 1/8” thick neoPrene (Black) ruBBer


PF-50NR8PF-75NR8PF-�00NR8PF-��5NR8PF-�50NR8PF-�00NR8PF-�50NR8PF-300NR8PF-350NR8PF-400NR8PF-450NR8PF-500NR8PF-600NR8PF-700NR8PF-800NR8PF-�000NR8PF-��00NR8

PF-50NF8PF-75NF8PF-�00NF8PF-��5NF8PF-�50NF8PF-�00NF8PF-�50NF8PF-300NF8PF-350NF8PF-400NF8PF-450NF8PF-500NF8PF-600NF8PF-700NF8PF-800NF8PF-�000NF8PF-��00NF8

Material: 1/16” thick neoPrene (Black) ruBBer


PF-50NR�6PF-75NR�6PF-�00NR�6PF-��5NR�6PF-�50NR�6PF-�00NR�6PF-�50NR�6PF-300NR�6PF-350NR�6PF-400NR�6PF-450NR�6PF-500NR�6PF-600NR�6PF-700NR�6PF-800NR�6PF-�000NR�6PF-��00NR�6

PF-50NF�6PF-75NF�6PF-�00NF�6PF-��5NF�6PF-�50NF�6PF-�00NF�6PF-�50NF�6PF-300NF�6PF-350NF�6PF-400NF�6PF-450NF�6PF-500NF�6PF-600NF�6PF-700NF�6PF-800NF�6PF-�000NF�6PF-��00NF�6

Material: 1/16” thick non-asBestos


PF-50AR�6PF-75AR�6PF-�00AR�6PF-��5AR�6PF-�50AR�6PF-�00AR�6PF-�50AR�6PF-300AR�6PF-350AR�6PF-400AR�6PF-450AR�6PF-500AR�6PF-600AR�6PF-700AR�6PF-800AR�6PF-�000AR�6PF-��00AR�6

PF-50AF�6PF-75AF�6PF-�00AF�6PF-��5AF�6PF-�50AF�6PF-�00AF�6PF-�50AF�6PF-300AF�6PF-350AF�6PF-400AF�6PF-450AF�6PF-500AF�6PF-600AF�6PF-700AF�6PF-800AF�6PF-�000AF�6PF-��00AF�6

ACTUAL SIZES OF PIPE FLANGE GASKETSSIZE RING GASKET FULL FACE GASKET BOLT HOLES�/�3/4�� /4� �/�� /�33 �/�44 �/�5678�0��

�3/�6” ID x � 7/8” OD�5/�6” ID X � 5/�6” OD� �/4” ID X � 5/8” OD� 5/8” ID X 3” OD� 7/8” ID X 3 3/8” OD� �/4” ID X 4 �/8” OD� �3/�6” ID X 5” OD3 �/�” ID X 5 �/�” OD4” ID X 6 3/8” OD4 �/�” ID X 6 7/8” OD5” ID X 7” OD5 �/�” ID X 7 3/4” OD6 �/�” ID X 8 5/8” OD7 �/�” ID X �0” OD8 �/�” ID X ��” OD�0 5/8” ID X �3 �/4” OD�� /�6” ID X �5 5/8” OD

�3/�6” ID X 3 �/�” OD�” ID X 3 7/8” OD� �/4” ID X 4 �/4” OD� 9/�6” ID X 4 5/8” OD� �5/�6” ID X 5” OD� 5/�6” ID X 6” OD� 7/8” ID X 7” OD3 �/�” ID X 7 �/�” OD4” ID X 8 �/�” OD4 �/�” ID X 9” OD4 �5/�6” ID X 9 �/�” OD5 �/�” ID X �0” OD6 5/8” ID X ��” OD7 9/�6” ID X �� /�” OD8 5/8” ID X �3 �/�” OD�0 �/�” ID X �5 5/8” OD�� 7/8” ID X �8 3/4” OD

444444448888888

��


Material: 1/8” thick non-asBestos

SIZE RING GASKET�/�3/4�� /4� �/�� /�3

PF-50AR8PF-75AR8PF-�00AR8PF-��5AR8PF-�50AR8PF-�00AR8PF-�50AR8PF-300AR8

BOLT PACKS / WATER PUMP GASKETS

GASKET TO FIT ACE

108202GASKET TO FITACE PUMPSUniversal TypeACTUAL SIZE: 6 �5/�6” X 6 �5/�6”

GASKETS TO FIT AEROMOTOR

108221GASKET TO FITAEROMOTOR PUMPReplaces: 26360

ACTUAL SIZE: 7 5/8” OD X 6” ID

BOLT PACKS

SSC’s Bolt Packs include any of the above listed Pipe Flange Gaskets individually packed with the appropriate ASTM-A307 Grade 2 hex head bolts with finished hex nuts. These kits offer the convenience of having all flange parts in one package. To order a kit just add the letters “BP” to the end of the gasket number listed above. For example to order a 4” full faced flange gasket (1/8” Red Rubber) bolt pack, use part #PF-400RF9BP. See our price list or website for details.

PIPE FLANGE BOLTS AND NUTS

SSC# DESCRIPTIONPF-�00BPF-�00NPF-�00BPF-�00NPF-500BPF-500NPF-�000BPF-�000N

BOLT FOR �/�”,3/4”,�”,� �/4”,� �/�” PIPE FLGS.NUT FOR �/�”, 3/4”,�”,� �/4”, � �/�” PIPE FLGS.

BOLT FOR �”,� �/�”,3”,3 �/�”,4”, 4 �/�” PIPE FLGNUT FOR �”,� �/�”,3”,3 �/�”,4”,4 �/�” PIPE FLGS.

BOLT FOR 5”, 6”, 7”, 8” PIPE FLANGESNUT FOR 5”, 6” 7” 8” PIPE FLANGES

BOLT FOR �0”, ��” PIPE FLANGESNUT FOR �0”, ��” PIPE FLANGES

108222GASKET TO FITAEROMOTOR PUMPReplaces: 27687

ACTUAL SIZE: 4 �/8” X 3 �/4”

108223GASKET TO FITAEROMOTOR PUMPReplaces: 27749ACTUAL SIZE: 9 �/�” OD

X 7 �3/�6” ID

GASKET TO FIT ALLIS CHALMERS

108231GASKET TO FITALLIS CHALMERSPUMPACTUAL SIZE: 6 7/�6” OD

X 5 3/4” ID

GASKETS TO FIT BERKELY

108241GASKET TO FITBERKELY PUMP



ACTUAL SIZE: 6 �5/�6” X 6 �5/�6”


ACTUAL SIZE: 6 7/8” OD X 5 �5/�6” ID

GASKETS TO FIT ALLIED PUMP

108227GASKET TO FITALLIED WATER PUMP RESEVOIR


108228GASKET TO FITALLIED WATER PUMP VOLUTEThickness: 1/64”ACTUAL SIZE: 6 �/�” OD

X 5 5/8” ID

108229GASKET TO FITALLIED WATER PUMP VOLUTEThickness: 1/32”ACTUAL SIZE: 6 �/�” OD

X 5 5/8” ID


WELL & MISC. WATER PUMP GASKETS

108244GASKET TO FITBERKELY PUMPReplaces: S0-4757ACTUAL SIZE: 7 5/8” OD

X 6 5/8” ID

108245GASKET TO FITBERKELY PUMPReplaces: S0-5126ACTUAL SIZE: �0” OD

X 9 �/8” ID

GASKETS TO FIT FLINT & WALLING (F&W)

108250GASKET TO FITFLINT & WALLINGPUMPACTUAL SIZE: 6 �3/�6” OD X 4” ID

108251GASKET TO FITFLINT & WALLINGPUMPReplaces: 103969ACTUAL SIZE: 4 �/�6” X 3 �/�”

108252GASKET TO FITFLINT & WALLINGPUMPReplaces: 130968ACTUAL SIZE: 7” OD X 4 �/�” ID

108253GASKET TO FITFLINT & WALLINGPUMPReplaces: 125994ACTUAL SIZE: 8 7/�6” OD

X 5 �/�6” ID

108254GASKET TO FITFLINT & WALLINGPUMPReplaces: 127782

ACTUAL SIZE: 6 �/8” OD X 5” ID

108255GASKET TO FITFLINT & WALLINGPUMPReplaces: 131743ACTUAL SIZE: 4 3/�6” OD

GASKETS TO FIT FAIRBANKS

108260GASKET TO FITFAIRBANKS PUMP

ACTUAL SIZE: 6 7/8” ODX 6 �/4” ID

108261GASKET TO FITFAIRBANKS PUMPReplaces: 40039765ACTUAL SIZE: 7 �/4” OD

X 6 5/8” ID

108262GASKET TO FITFAIRBANKS PUMPReplaces: 40039766

ACTUAL SIZE: 7 5/�6” X 8 �/8”

108263GASKET TO FIT FAIRBANKS PUMPReplaces: 40071117ACTUAL SIZE: 8 3/8” X 7 3/8”

108264GASKET TO FITFAIRBANKS PUMPPerfected SeriesACTUAL SIZE: 9 3/4” OD

X 8 �/8” ID

108265GASKET TO FITFAIRBANKS PUMPSWP SeriesACTUAL SIZE: 7 3/�6” OD

X 6 �/�” ID

GASKET TO FIT GEORGIA PACIFIC

108271GASKET TO FITGEORGIA PACIFICPUMP

ACTUAL SIZE: 7” OD X 6 �/�” ID

GASKETS TO FIT GOULDS

108275GASKET TO FITGOULDS PUMPReplaces: 5K5

ACTUAL SIZE: 9 �/8” OD

Pump Seals for the above pumps start on page 64.




ACTUAL SIZE: �0” OD

108277GASKET TO FITGOULDS PUMPReplaces: 5K107ACTUAL SIZE: 7 3/4” OD




108280GASKET TO FITGOULDS PUMPReplaces: 5K110ACTUAL SIZE: 9” OD

108281GASKET TO FITGOULDS PUMPReplaces: 5K122ACTUAL SIZE: �0” OD


X 5 �/�” ID


X 6 7/8” ID


X 6 3/4” ID


ACTUAL SIZE: 4 �/�” X 4 5/�6”



GASKET TO FIT F.E. MEYERS

108301GASKET TO FITF.E. MEYERS PUMPReplaces: 5059A-332ACTUAL SIZE: 6 7/8” OD

X 6 �/8” ID

GASKETS TO FIT PEABODY BARNES

108305GASKET TO FITPEABODY BARNESPUMPACTUAL SIZE: 6 �/�” OD

X 5 �5/�6” ID

108306GASKET TO FITPEABODY BARNESPUMPACTUAL SIZE: 5 �/4” X 3”

108307GASKET TO FITPEABODY BARNESPUMPReplaces: 27344ACTUAL SIZE: 9 �/4” OD

X 7 �/�” ID

108288GASKET TO FITGOULDS PUMP5K2 pattern forBalance Flow.Replaces: 5K2

ACTUAL SIZE: 7 3/4” OD X 3 7/8” ID

GASKETS TO FIT JET AERATOR

108330RELAY COVER GASKET TO FIT JET AERATORReplaces: 4600102Buna-N Rubber

108332CENTER GASKET TO FIT JET AERATORReplaces: 660290Buna-N Rubber

ACTUAL SIZE: 4” ODX 3 �/4” ID

ACTUAL SIZE: �” OD X 3/4” ID


STICKY SPRAYThis spray holds O-rings and gaskets in place during installa-tion. Spray the surface where you are installing the part, wait 1-2 minutes until it becomes tacky and apply the part. The part can easily be separated from the surface at a later date.

LUB-990STICKY SPRAY4oz. Spray Bottle

108312GASKET TO FITRAPID DAYTONPUMPACTUAL SIZE: 7 3/�6” OD

X 4 �/�” ID

108314GASKET TO FITRAPID DAYTONPUMPACTUAL SIZE: 7 �/8” OD

X 6 5/�6” ID

108315GASKET TO FITRAPID DAYTONPUMPACTUAL SIZE: 7” OD

X 4 �/4” ID

108316GASKET TO FITRAPID DAYTONPUMPReplaces: W-16675ACTUAL SIZE: 7 �/8” OD

X 5 7/8” ID

GASKET TO FIT VAK PAK

108320GASKET TO FITVAK PAK PUMPReplaces: 9118ACTUAL SIZE: �0” OD

X 9 �/8” ID

GASKETS TO FIT RAPID DAYTON

108310GASKET TO FITRAPID DAYTON PUMPACTUAL SIZE: 7 3/�6” OD

X 4 �/�” ID

GASKET TO FIT STERLING

108319CONDENSATE RETURN GASKET TO FIT STERLING PUMPHot Water UseACTUAL SIZE: 6 3/8” OD

X 5” ID

PLUMBERS TEFLON GREASEThe U.S.D.A. has rated this lubricant as Food Grade Acceptable. Safely lubricate everything from O-rings and seals to valves and faucet components. This is a waterproof, non-melting, pure synthetic grease which will seal out water and lubricate under the most adverse conditions.

LUB-985TEFLON LUBRICANT/SEALANTU.S.D.A. H-1 Rated3 OZ. TUBE

PLUMBERS SILICONE GREASESSC’s Silicone Lube has similar uses as the teflon lube except that it is silicone based, making it a higher grade product than the teflon. It is also rated as Food Grade Acceptable by the U.S.D.A.

LUB-987SILICONE LUBRICANT/SEALANTU.S.D.A. H-1 Rated3 OZ. TUBE

SILICONE BASED SPRAY LUBRICANTA coating of this food-grade rated spray lubricant will protect everything from O-rings to nuts and bolts. The superior and safe lubrication properties of silicone are packaged here in a spray for a cleaner and easier application.

LUB-989SILICONE BASEDSPRAY LUBRICANT

4 OZ. SPRAYBOTTLE

GASKET REMOVING SOLUTION

GR-957GASKET REMOVING SOLUTION18 oz. Spray Can

Make the removal of stubborn, baked-on gaskets easy. With this product’s foaming action you can remove gaskets without the work and without damage to the part. Sold in 18 oz. spray cans.


Pump Seals for the above pumps start on page 64.


REPLACEMENT PUMP SEALS

We stock replacement pump seals for the more popular pumps on the market. Below is a cross reference listed by pump manufacturer and the corresponding seals that go in that equipment. On page 67 is a reverse cross reference which shows the seals in SSC part number order and the listings they fit.

PuMP seal oeM cross referenceFITS OEM SSC# DIA. FITS OEM#Ace Pump MS-�00 5/8” ACH-�5,33,50,75,�00 MS-�0� 3/4” ACX-H�50 MS-�85V � �/4” 30�65FAdvance MS-�00 5/8” Aeromotor MS-�00 5/8” MS-�00 5/8” MS-�0� 3/4” SJ-47AG Chemical EQP MS-�85V � �/4” 5�3745Air Injector MS-�00 5/8” SEA-�A, �AAllis Chalmers MS-359 5/8” 5�-�04-945-804 MS-�00 5/8” 5�-�04-969-803,8�3.8�3 MS-358 3/4” 607986 MS-356 � �/8” 5�-�04-945-806 MS-�85 � �/4” 5�-��3-59�-80� MS-758 � �/�” 5�-��-870-80�American Machine MS-�00 5/8” MS-6�6V MS-356 � �/8” �87-�5A/BAmerican Products MS-�000 5/8” 397,0��,397,0�0 MS-�000 5/8” 3970��, 3970�0 MS-�0� 3/4” 395005 MS-�0� 3/4” 395005Ampro MS-�000 5/8” AP-304DAmpro-Diaclear MS-�000 5/8” AP-304DAnthony MS-�000 5/8” 4380 MS-�000 5/8” 4380 MS-�00 5/8” 4547 MS-�00 5/8” 4547Aqua Chem MS-358 3/4” 9�5-75�6Aqua Flo MS-309 7/8” 9�500000 MS-�00 5/8” 90500�50 MS-��3� 5/8” 9�049000 MS-�000 5/8” 9�509040, 9�500050Armstrong Pump MS-�85 � �/4” 975000-99�Arneson MS-�00 5/8” A-8Atlantic Fluidics MS-�000 5/8” MS-356 � �/8” MS-�85 � �/4” Aurora Pump MS-�00 5/8” 7��-704�-750 MS-358 3/4” 7��-�004-753 MS-356 � �/8” 7��-0907-735 MS-�85 � �/4” MS-758 � �/�” 7��-�0�0-753Baker MS-�00 5/8” MI-�9-3Baker-Hydro MS-�00 5/8” 35B��78Barnes, John S. MS-358 3/4” 6756�Beach Russ MS-�85 � �/4” Bell & Gossett MS-359 5/8” �800�4 MS-356 � �/8” DP0476, �800�7 MS-�85V � �/4” �86877, P705�3Berkeley MS-�00 5/8” S80�9, S-�0790 MS-�0� 3/4” S-�079�, S-�079� MS-�0� 3/4” S-5646, S-��96� MS-356 � �/8” S-3�690Braden Winch MS-�0� 3/4” Browne & Sharp MS-�85 � �/4” (W/P66)��3-744-�74 MS-�85 � �/4” 7�3-9�45-�70

FITS OEM SSC# DIA. FITS OEM# BSM Pump MS-�85V � �/4” 466-�9�-�Burks Pumps MS-�00 5/8” �7038 MS-358 3/4” MS-�0� 3/4” �7039 MS-�85 � �/4” 99�7 MS-�85V � �/4” 99�6C.B. Tool Co. MS-�00 5/8” �66� MS-�0� 3/4” �66�C.H. & E. Mfg. MS-�00 5/8” W-�05-7 MS-�0� 3/4” W-�05-� MS-�85 � �/4” W-�05-�5ACarter, Ralph B. MS-�00 5/8” �S-5005A, �S-505 MS-�00 5/8” �S-50�0 MS-�0� 3/4” �S-5039Carver MS-�00 5/8” B�0-�, B�-�-�-�/4 (NAMEPL) MS-359 5/8” BB�0-� (NAMEPLATE) MS-�0� 3/4” K�/�, L�0-�� (NAMEPL) MS-358 3/4” MODEL T�4C6 MS-356 � �/8” A300-8�0 (NAMEPLATE) MS-�85V � �/4” 090-��5-0�-0�03 (NAMEPL) MS-�85 � �/4” K�L-�0-9 (NAMEPLATE)Chainbelt MS-�0� 3/4” X77�8 MS-�85 � �/4” X80�3Chicago Pump MS-�00 5/8” �658090 MS-�00 5/8” �665�7�Clay Equipment MS-�85 � �/4” 0-90�7�8-0 MS-758 � �/�” 0-90�7�9-0Clayton Mark MS-50� 5/8” �9304BCleaver Brooks MS-358 3/4” 9�5-65Clow Corp. MS-�85 � �/4” C3-�-57Consol. Dies./Elect. MS-758 � �/�” 0338-0�75Construction Mach MS-758 � �/�” Continental Pump MS-359 5/8” V8-�5A, U8-�5QCooper MS-�85 � �/4” �-0�S-073-003Crane-Deming MS-�00 5/8” �5 MS-359 5/8” 344�7 MS-50� 5/8” 5/8 PACKAGE SEAL MS-�0� 3/4” 59 MS-�85V � �/4” 0088458, 0088459 MS-�85 � �/4” 30880 MS-758 � �/�” 30884Decatur Pump MS-359 5/8” MS-50� 5/8” �0888 MS-358 3/4” 899� MS-�85 � �/4” 99�7 MS-�85V � �/4” 99�6Dempster Ind. MS-�00 5/8” 907-06030 MS-358 3/4” 907-060403Denison MS-�0� 3/4” 6��-03�0�Detroit Harvester MS-�00 5/8” Devilbiss MS-358 3/4” QM4509Dixie Pump MS-�00 5/8” MS-�0� 3/4” Doerr MS-359 5/8” Domestic Pump MS-�00 5/8” �800�3 MS-359 5/8” �800�4 MS-�0� 3/4” MS-358 3/4” �800�0Doughboy MS-�000 5/8” 306-�00� MS-�00 5/8” 306-�006Douglas Motor MS-�0� 3/4” 47406Dresser MS-�00 5/8” ��5-�0�/��3-�Dunham-Bush MS-359 5/8” S-47�East Side Mfg. MS-�00 5/8” MS-359 5/8” MS-�000 5/8” MODEL BTH MS-�00 5/8” P�83�� MS-358 3/4” MS-�0� 3/4” Economy Pump MS-�00 5/8” Enpo-Cornell MS-�0� 3/4” Essick MS-358 3/4” 90�4009 MS-�85 � �/4” 90�40�5

PUMP SEALS


FITS OEM SSC# DIA. FITS OEM#Everite MS-50� 5/8” MS-�00 5/8” �544 MS-359 5/8” �584Fairbanks Morse MS-359 5/8” MS-�00 5/8” 8�480-75, 8�7�3 MS-50� 5/8” S6�5, 8�635-60,8�70�-75 MS-�0� 3/4” MODEL AC,AEC,AS,AES MS-356 � �/8” HYD�AC MS-�85 � �/4” HYD�AC�Finn Corp. MS-�85 � �/4” 80485Flint & Walling MS-800 5/8” AC-�6,�3��00,�3�377 MS-�0� 3/4” ��6544, ��6545Frederick Pump/Eng MS-�85 � �/4” Geco Sales MS-�000 5/8” General Pump MS-�00 5/8” Georgia Pacific MS-200 5/8” GG Industries MS-�00 5/8” P-M03885 MS-�000 5/8” P-SEAL, 4/P-SEALGilbert Barker MS-�000 5/8” K8��59XGorman Rupp MS-633 5/8” �5�7�-8�4 MS-�00 5/8” S-�53�, S-756 MS-359 5/8” S-765 MS-�� 3/4” S-�679 MS-358 3/4” S-936, S-�575 MS-�35 �” S-�906,S-�83� MS-446 � 3/4” S-�8�� MS-�85V � �/4” �5�7�-888 MS-756 � �/4” S-�6�� MS-36�-�� /4” S-335 MS-758 � �/�” S-��50Goulds Pumps MS-70� 5/8” �0K�, 70470-506� MS-70� 5/8” 7�598-�06�, �0-83-��00 MS-446 � 3/4” 9�5�09�00� MS-356 � �/8” �0K�� MS-�85 � �/4” �0K�3, 9�5�07�00� MS-�85V � �/4” �0K�9 MS-�85V � �/4” �0K�5 (W/CMS)Gusher Pumps MS-�35 �” 8400�-�H & F Mfg. Co. MS-�000 5/8” Hale Products MS-�0� 3/4” �9�-5040-00-3 MS-�35 �” �5D-G444,�00�-0�-�0-00 MS-356 � �/8” �96-5��0-00 MS-758 � �/�” �96-50��-03Hall Scott MS-�00 5/8” Hayward MS-�00 5/8” 6�7�9 MS-�00 5/8” SPX-��50-Z-� MS-��3� 5/8” SPX-�500-KA MS-�0� 3/4” A759�� MS-�0� 3/4” SPX-�600-Z-� MS-�35 �” 47046 MS-446 � 3/4” 46�50Heinecke MS-�0� 3/4” MODEL �THobart Mfg. MS-�35 �” R-79�05 MS-758 � �/�” Homart-Sears MS-�00 5/8” 4�G�377WHydromatic Pump MS-�00 5/8” 83 MS-358 3/4” 00�00-000-� MS-�0� 3/4” �7048-0-� MS-�35 �” 00300-000-� MS-446 � 3/4” ��049-00�-� MS-�85 � �/4” 049�6-000-� MS-�85V � �/4” 049�6-00�-� MS-758 � �/�” 009�0-00�-�Hypro Corp. MS-�35 �” ��399Ingersoll Rand MS-633 5/8” CPM-6�5�7� MS-359 5/8” CPM-6�5�C� MS-�00 5/8” CPM-6�5�C�, 6�58C� MS-�85V � �/4” CPM-�06�3AJacuzzi MS-�90 5/8” �0-��0�, �0-��03 MS-�00 5/8” �0-467,�0-�436-00, �0- 000�-06 MS-�0� 3/4” �0-477,�0-486,�0-��0,�0- �390-04 MS-359 5/8” �0-478, �0-506

FITS OEM SSC# DIA. FITS OEM# MS-358 3/4” �0-479 MS-�35 �” �0-504,�0-��99-063 MS-�05-�� 3/4” �0-330 MS-�85 � �/4” �0-0369-�9, �0-�400-0� MS-758 � �/�” �0-�348-07Jaeger MS-�0� 3/4” Kenco MS-�00 5/8” MODEL �39AKinney Vac Pump MS-358 3/4” KC�.5-�5, KS-�3, KC-5, KC-8(49�) MS-358 3/4” KC-5, KC-8(49�)Lancaster MS-�00 5/8” �66� MS-�000 5/8” 5�3-6 MS-358 3/4” �36� MS-�0� 3/4” �66�Leland Faraday MS-800 5/8” LFP-333 TO 6�5, �4�07 TO�4��0 MS-�000 5/8” MDL LFP-�075, ��00, ��50, ��00Lomart MS-�000 5/8” Luitweiler Pump MS-�0� 3/4” MS-36�-�� /4” Marine Swim Pool MS-�0� 3/4” Marlow MS-�0� 3/4” 3859�-00 MS-978 � �/4” 4567�-�0McDonald, A.Y. MS-50� 5/8” 5MCD4 MS-�0� 3/4” 5MCD5Memphis MS-�00 5/8” 06�5-6BC MS-�0� 3/4” Metal Master MS-�00 5/8” MS-70� 5/8” �5��0Midland Products MS-�0� 3/4” 6070-0Monarch Ind. MS-�00 5/8” �40�60 MS-�0� 3/4” �4034/MS�7, �40�70 MS-�85 � �/4” �40070 MS-�85V � �/4” �40359Montgomery Ward MS-358 3/4” �4�8�MP Pump MS-�� 3/4” �5�� MS-358 3/4” �5�5�Murphy Diesel MS-358 3/4” MD-4090Myers, F.E. MS-309 7/8” ��576A MS-�00 5/8” �45�5A, �6�75A MS-359 5/8” ��447A MS-�0� 3/4” ��4�6A, A�, A3 MS-�85 � �/4” ��577A MS-758 � �/�” ��9��ANash Elmo MS-�00 5/8” HTG PUMP MS-758 � �/�” PK -79�National Ice Corp. MS-359 5/8” Oberdorfer MS-359 5/8” A5935 MS-�35 �” 3�3�5Osmonics Inc. MS-359 5/8” ��35�5Pac Fab MS-�00 5/8” 354545 MS-�00 5/8” P�8�80 MS-50� 5/8” P�83��, 07�733 MS-�000 5/8” P�83�3, 07�734 MS-�0� 3/4” P�8300, 07�7�8, 35400�Paco MS-�00 5/8” SL-7�0�, 774�, K�0�-� MS-�0� 3/4” K�0�-� MS-�35 �” SL-7735 MS-446 � 3/4” K�04-� MS-�05-�� 3/4” SL-7090, �4007090 MS-36�-�� /4” �4007099 MS-756 � �/4” SL-7094 MS-758 � �/�” SL-7�07Peabody-Barnes MS-�00 5/8” ��397-��839, ��703 MS-359 5/8” �8873A MS-�0� 3/4” �3��0, �40�7�� MS-358 3/4” �5344, 6756� MS-�35 �” �8004-30090 MS-�85 � �/4” 707�3, �9�46 MS-758 � �/�” �4998Peerless MS-�00 5/8” �658090 MS-�00 5/8” �665�7�

PUMP SEALS


FITS OEM SSC# DIA. FITS OEM# MS-�05-�� 3/4” �663044 MS-36�-�� /4” �657093, �663048Perfecting MS-359 5/8” 73�0�5 (Division of Duff-Norton) MS-356 � �/8” 73�049 (Division of Duff-Norton)Polaris MS-�000 5/8” P55Premier MS-�000 5/8” 3�-8�3 MS-�0� 3/4” 3�-8��Price Pump Co. MS-359 5/8” 84� MS-�0� 3/4” MODEL SP-�5 MS-758 � �/�” MODEL E�50, E�00Prosser Pump MS-359 5/8” �-3�00� MS-756 � �/4” �5 & 40HP MOD. 9-�603�-3Purex MS-�00 5/8” P�8�80 MS-50� 5/8” P�83��/07�733 MS-�000 5/8” P�83�3/07�734 MS-�0� 3/4” P�8300/07�7�8Rainbow Irrigation MS-�85 � �/4” �48��Red Jacket MS-�00 5/8” C76-98A-C, C76-78A, �76-037 (Veeder Root) MS-�0� 3/4” 76-��9, 76-�89 (Veeder Root)Reliance Electric MS-446 � 3/4” 64�6�-��C MS-�85 � �/4” 64�6�-��ARice MS-�00 5/8” ��-0�4 MS-�0� 3/4” ��-0�3Robbins & Myers MS-359 5/8” 3�-0�4�4 MS-�00 5/8” POD-3054 MS-�0� 3/4” 3�-0�6�5, 48-65C MS-358 3/4” 3�-03945-000Romar Filter MS-�00 5/8” 6�8-00�Ruth Berry MS-�0� 3/4” 60�, 60�AScot Pump MS-309 7/8” �0�-000-�56 MS-�00 5/8” �0�-000-340 MS-50� 5/8” ��8-000-340D MS-446 � 3/4” �0�-000-�96 MS-�85 � �/4” �0�-000-�04,�0�-000-�04, �0�-000-�94 MS-�85V � �/4” �0�-000-�94AService Filtration MS-309 7/8” 55-488 MS-358 3/4” 55-407Sethco Mfg. MS-359 5/8” Shelter Pump MS-�00 5/8” MS-�0� 3/4” Sherwood Brass MS-�00 5/8” �0�59Sigmund MS-356 � �/8” MS-758 � �/�” Simmons MS-�00 5/8” MODEL 6Skidmore MS-309 7/8” 506�5-�, �4�-54055 MS-�90 5/8” �4�-54009 MS-�00 5/8” �4�-54049 MS-359 5/8” 506�5-� MS-356 � �/8” 506�5-3, �4�-54058Somat Corp. MS-309 7/8” 5430� MS-359 5/8” 54300SPP Pump MS-633 5/8” MS-359 5/8” MS-356 � �/8” MS-758 � �/�” Sta Rite MS-50� 5/8” ��8-000-340 MS-�00 5/8” �7304-0�00S MS-�000 5/8” U�09-�36SS MS-�00 5/8” U�09-6,U�09-6A,U�09-93SS, U9-48,�735�-0�0�S MS-�0� 3/4” U�09-358SS,U9-��,U�09- 37�SS, �735�-0�0�S, 37400-00�7S MS-358 3/4” U�09-99 MS-�35 �” �6504 MS-446 � 3/4” S-3�0�5 MS-�85 � �/4” U�09-433SS,U�09- ��0, S-3�0�4Sterling Machinery MS-�0� 3/4”

FITS OEM SSC# DIA. FITS OEM#Sterling Machinery MS-358 3/4” �6�6 MS-�85 � �/4” �636Stevens Pump Co. MS-�00 5/8” �6-06�-03Stone Construction MS-�0� 3/4” 3��3, 3��3�H MS-446 � 3/4” 377�8�H MS-�85 � �/4” 3769� MS-758 � �/�” 3769�, 3769��HSwaby Mfg. Co. MS-359 5/8” MS-758 � �/�” MS-446 � 3/4” Swim-Quip MS-�0� 3/4” AS-�0�Taco MS-359 5/8” ��-009, ��-009 MS-633 5/8” �70-�0�RP,�600-�70RP MS-�00 5/8” �7�-009, �7�-0�7 MS-356 � �/8” 950-670RP, 95�-3�6�DRP MS-758 � �/�” 950-67�RPTait MS-�0� 3/4” �506�Teel Pump MS-359 5/8” �R304, �P567, 5P386 MS-800 5/8” �R307, 5P387, 5P-4�� MS-�00 5/8” �R3��, 5P404, 5P403 MS-�00 5/8” �R3��, 5P406, 5P405 MS-50� 5/8” �R3�5, 5P4�0, 5P409 MS-�000 5/8” �R3�7, �R3�8, 5P368, 5P369 MS-�0� 3/4” �R3�3, 5P4��, 5P4��, �R�99, 5P4�4 MS-�0� 3/4” �R3�9, 5P4�6 MS-�35 �” 5P390 MS-�05-�� 3/4” 5P-378 MS-356 � �/8” �R30�, 5P39�, 3P608 MS-�85 � �/4” �R439, 5P394 MS-36�-�� /4” 5P-374 MS-756 � �/4” 5P-396Toledo MS-50� 5/8” A�4067Trupar MS-�0� 3/4” P-��0�Uniflow MS-200 5/8” US Electric Motor MS-358 3/4” PUL�� MS-356 � �/8” Vertiflow MS-358 3/4” SJ-2112-C1-00 MS-�85V � �/4” SJ��0-C�-X0Vico MS-��36 3/4” PPSFSEALWaterway MS-�000 5/8” 3�9-3�00BWatts MS-�000 5/8” Waukesha Motors MS-�0� 3/4” �5��43-B MS-�85 � �/4” �78033Wayne Home Equip. MS-�00 5/8” �5559/56�04 MS-�000 5/8” �5996/56�09 MS-�0� 3/4” �5693/56�05Weber Ind. MS-�85V � �/4” 70X��3-MWeil Pump Co. MS-�000 5/8” MS-�00 5/8” �7-30009-005 MS-�0� 3/4” �7-6�37�-008 MS-358 3/4” �05-0�6-�0� MS-356 � �/8” �37-000-��9Weinman MS-309 7/8” Q�6-394-Y0� MS-50� 5/8” Q�6-77 MS-�05-�� 3/4” Q�6-��-Y03,Q�6-��7-Y03 MS-36�-�� /4” Q�6-�43-Y03 MS-�85 � �/4” Q�6-395-40�, Q�6-�66-40� MS-756 � �/4” Q�6-395-Y34Wells Bloomfield MS-359 5/8” 35902Wet Institute MS-�000 5/8” �000White MS-�00 5/8” Worthington MS-�00 5/8” 43008 MS-359 5/8” 50675 MS-�0� 3/4” Zoeller Co. MS-356 � �/8” 65�0

Please see our Bell & Gossett and Taco sections on pages �8-4� for seals and replacement parts for those manufacturers. Also, please see our separate ��7 page Pool & Spa Parts Catalog for our complete listings of seals, gaskets, O-rings and motor parts for the Pool & Spa Industry.

PUMP SEALS


PuMP seal reVerse cross referenceSSC# FITS OEM DIA. FITS OEM#MS-�00 Ace Pump 5/8” ACH-�5,33,50,75,�00(Type: A) Aeromotor 5/8” Anthony 5/8” 4547 Anthony 5/8” 4547 Aurora Pump 5/8” 7��-704�-750 Baker 5/8” MI-�9-3 Carter, Ralph B. 5/8” �S-50�0 Chicago Pump 5/8” �665�7� Detroit Harvester 5/8” East Side Mfg. 5/8” P�83�� Economy Pump 5/8” Homart-Sears 5/8” 4�G�377W Memphis 5/8” 06�5-6BC Nash Elmo 5/8” HTG PUMP Pac Fab 5/8” P�8�80 Peerless 5/8” �665�7� Purex 5/8” P�8�80 Red Jacket 5/8” C76-98A-C, C76-78A, �76-037 (Veeder Root) Skidmore 5/8” �4�-54049 Sta Rite 5/8” U�09-6,U�09-6A, U�09-93SS,U9-48, �735�-0�0�S Teel Pump 5/8” �R3��, 5P404, 5P403 Weil Pump Co. 5/8” �7-30009-005MS-�0� Heinecke 3/4” MODEL �T(Type: A) Myers, F.E. 3/4” ��4�6A, A�, A3 Teel Pump 3/4” �R3�9, 5P4�6MS-�� Gorman Rupp 3/4” S-�679(Type: C) MP Pump 3/4” �5��MS-�85 Allis Chalmers � �/4” 5�-��3-59�-80�(Type: C) Armstrong Pump � �/4” 975000-99� Atlantic Fluidics � �/4” Aurora Pump � �/4” Beach Russ � �/4” Browne & Sharp � �/4” (W/P66)��3-744-�74 Browne & Sharp � �/4” 7�3-9�45-�70 Burks Pumps � �/4” 99�7 C.H. & E. Mfg. � �/4” W-�05-�5A Carver � �/4” K�L-�0-9 (NAMEPLATE) Chainbelt � �/4” X80�3 Clay Equipment � �/4” 0-90�7�8-0 Clow Corp. � �/4” C3-�-57 Cooper � �/4” �-0�S-073-003 Crane-Deming � �/4” 30880 Decatur Pump � �/4” 99�7 Essick � �/4” 90�40�5 Fairbanks Morse � �/4” HYD�AC� Finn Corp. � �/4” 80485 Frederick Pump/Eng � �/4” Goulds Pumps � �/4” �0K�3, 9�5�07�00� Hydromatic Pump � �/4” 049�6-000-� Jacuzzi � �/4” �0-0369-�9, �0-�400-0� Monarch Ind. � �/4” �40070 Myers, F.E. � �/4” ��577A Peabody-Barnes � �/4” 707�3, �9�46 Rainbow Irrigation � �/4” �48�� Reliance Electric � �/4” 64�6�-��A Scot Pump � �/4” �0�-000-�04,�0�-000-�04, �0�-000-�94 Sta Rite � �/4” U�09-433SS,U�09- ��0, S-3�0�4 Sterling Machinery � �/4” �636 Stone Construction � �/4” 3769� Teel Pump � �/4” �R439, 5P394 Waukesha Motors � �/4” �78033

SSC# FITS OEM DIA. FITS OEM# Weinman � �/4” Q�6-395-40�, Q�6-�66-40� Zoeller Co. � �/4” 8�65MS-�85V Ace Pump � �/4” 30�65F(Type: C) AG Chemical EQP � �/4” 5�3745 Bell & Gossett � �/4” �86877, P705�3 BSM Pump � �/4” 466-�9�-� Burks Pumps � �/4” 99�6 Carver � �/4” 090-��5-0�-0�03 (NAMEPL) Crane-Deming � �/4” 0088458, 0088459 Decatur Pump � �/4” 99�6 Gorman Rupp � �/4” �5�7�-888 Goulds Pumps � �/4” �0K�9 Goulds Pumps � �/4” �0K�5 (W/CMS) Hydromatic Pump � �/4” 049�6-00�-� Ingersoll Rand � �/4” CPM-�06�3A Monarch Ind. � �/4” �40359 Scot Pump � �/4” �0�-000-�94A Vertiflow 1 1/4” SJ2120-C1-X0 Weber Ind. � �/4” 70X��3-MMS-�00 Advance 5/8” (Type: A) Aeromotor 5/8” Air Injector 5/8” SEA-�A, �A Allis Chalmers 5/8” 5�-�04-969-803,8�3.8�3 American Machine 5/8” MS-6�6V Aqua Flo 5/8” 90500�50 Arneson 5/8” A-8 Baker-Hydro 5/8” 35B��78 Berkeley 5/8” S80�9, S-�0790 Burks Pumps 5/8” �7038 C.B. Tool Co. 5/8” �66� C.H. & E. Mfg. 5/8” W-�05-7 Carter, Ralph B. 5/8” �S-5005A, �S-505 Carver 5/8” B�0-�, B�-�-�-�/4 (NAMEPL) Chicago Pump 5/8” �658090 Crane-Deming 5/8” �5 Dempster Ind. 5/8” 907-06030 Dixie Pump 5/8” Domestic Pump 5/8” �800�3 Doughboy 5/8” 306-�006 Dresser 5/8” ��5-�0�/��3-� East Side Mfg. 5/8” Everite 5/8” �544 Fairbanks Morse 5/8” 8�480-75, 8�7�3 General Pump 5/8” Georgia Pacific 5/8” GG Industries 5/8” P-M03885 Gorman Rupp 5/8” S-�53�, S-756 Hall Scott 5/8” Hayward 5/8” 6�7�9 Hayward 5/8” SPX-��50-Z-� Hydromatic Pump 5/8” 83 Ingersoll Rand 5/8” CPM-6�5�C�, 6�58C� Jacuzzi 5/8” �0-467,�0-�436-00, �0-000�-06 Kenco 5/8” MODEL �39A Lancaster 5/8” �66� Metal Master 5/8” Monarch Ind. 5/8” �40�60 Myers, F.E. 5/8” �45�5A, �6�75A Pac Fab 5/8” 354545 Paco 5/8” SL-7�0�, 774�, K�0�-� Peabody-Barnes 5/8” ��397-��839, ��703 Peerless 5/8” �658090 Rice 5/8” ��-0�4 Robbins & Myers 5/8” POD-3054 Romar Filter 5/8” 6�8-00� Scot Pump 5/8” �0�-000-340 Shelter Pump 5/8” Sherwood Brass 5/8” �0�59 Simmons 5/8” MODEL 6 Sta Rite 5/8” �7304-0�00S

PUMP SEALS

TYPE: A TYPE: B TYPE: C


SSC# FITS OEM DIA. FITS OEM# Stevens Pump Co. 5/8” �6-06�-03 Taco 5/8” �7�-009, �7�-0�7 Teel Pump 5/8” �R3��, 5P406, 5P405 Uniflow 5/8” Wayne Home Equip. 5/8” �5559/56�04 White 5/8” Worthington 5/8” 43008MS-�0� Ace Pump 3/4” ACX-H�50(Type: A) Aeromotor 3/4” SJ-47 American Products 3/4” 395005 American Products 3/4” 395005 Berkeley 3/4” S-�079�, S-�079� Berkeley 3/4” S-5646, S-��96� Braden Winch 3/4” Burks Pumps 3/4” �7039 C.B. Tool Co. 3/4” �66� C.H. & E. Mfg. 3/4” W-�05-� Carter, Ralph B. 3/4” �S-5039 Carver 3/4” K�/�, L�0-�� (NAMEPL) Chainbelt 3/4” X77�8 Crane-Deming 3/4” 59 Denison 3/4” 6��-03�0� Dixie Pump 3/4” Domestic Pump 3/4” Douglas Motor 3/4” 47406 East Side Mfg. 3/4” Enpo-Cornell 3/4” Fairbanks Morse 3/4” MODEL AC,AEC,AS,AES Flint & Walling 3/4” ��6544, ��6545 Hale Products 3/4” �9�-5040-00-3 Hayward 3/4” A759�� Hayward 3/4” SPX-�600-Z-� Hydromatic Pump 3/4” �7048-0-� Jacuzzi 3/4” �0-477,�0-486,�0-��0, �0-�390-04 Jaeger 3/4” Lancaster 3/4” �66� Luitweiler Pump 3/4” Marine Swim Pool 3/4” Marlow 3/4” 3859�-00 McDonald, A.Y. 3/4” 5MCD5 Memphis 3/4” Midland Products 3/4” 6070-0 Monarch Ind. 3/4” �4034/MS�7, �40�70 Pac Fab 3/4” P�8300, 07�7�8, 35400� Paco 3/4” K�0�-� Peabody-Barnes 3/4” �3��0, �40�7�� Premier 3/4” 3�-8�� Price Pump Co. 3/4” MODEL SP-�5 Purex 3/4” P�8300/07�7�8 Red Jacket 3/4” 76-��9, 76-�89 (Veeder Root) Rice 3/4” ��-0�3 Robbins & Myers 3/4” 3�-0�6�5, 48-65C Ruth Berry 3/4” 60�, 60�A Shelter Pump 3/4” Sta Rite 3/4” U�09-358SS,U9-��, U�09-37�SS�735�- 0�0�S, 37400-00�7S Sterling Machinery 3/4” Stone Construction 3/4” 3��3, 3��3�H Swim-Quip 3/4” AS-�0� Tait 3/4” �506� Teel Pump 3/4” �R3�3, 5P4��, 5P4��, �R�99, 5P4�4 Trupar 3/4” P-��0� Waukesha Motors 3/4” �5��43-B Wayne Home Equip. 3/4” �5693/56�05 Weil Pump Co. 3/4” �7-6�37�-008 Worthington 3/4” MS-�05-�� Jacuzzi � 3/4” �0-330(Type: C) Paco � 3/4” SL-7090, �4007090 Peerless � 3/4” �663044 Teel Pump � 3/4” 5P-378

SSC# FITS OEM DIA. FITS OEM# Weinman � 3/4” Q�6-��-Y03,Q�6-��7-Y03MS-�35 Gorman Rupp �” S-�906,S-�83�(Type: C) Gusher Pumps �” 8400�-� Hale Products �” �5D-G444,�00�-0�-�0-00 Hayward �” 47046 Hobart Mfg. �” R-79�05 Hydromatic Pump �” 00300-000-� Hypro Corp. �” ��399 Jacuzzi �” �0-504,�0-��99-063 Oberdorfer �” 3�3�5 Paco �” SL-7735 Peabody-Barnes �” �8004-30090 Sta Rite �” �6504 Teel Pump �” 5P390MS-�90 Jacuzzi 5/8” �0-��0�, �0-��03(Type: C) Skidmore 5/8” �4�-54009MS-309 Aqua Flo 7/8” 9�500000(Type: C) Myers, F.E. 7/8” ��576A Scot Pump 7/8” �0�-000-�56 Service Filtration 7/8” 55-488 Skidmore 7/8” 506�5-�, �4�-54055 Somat Corp. 7/8” 5430� Weinman 7/8” Q�6-394-Y0�MS-356 Allis Chalmers � �/8” 5�-�04-945-806(Type: C) American Machine � �/8” �87-�5A/B Atlantic Fluidics � �/8” Aurora Pump � �/8” 7��-0907-735 Bell & Gossett � �/8” DP0476, �800�7 Berkeley � �/8” S-3�690 Carver � �/8” A300-8�0 (NAMEPLATE) Fairbanks Morse � �/8” HYD�AC Goulds Pumps � �/8” �0K�� Hale Products � �/8” �96-5��0-00 Perfecting � �/8” 73�049 (Division of Duff-Norton) Sigmund � �/8” Skidmore � �/8” 506�5-3, �4�-54058 SPP Pump � �/8” Taco � �/8” 950-670RP, 95�-3�6�DRP Teel Pump � �/8” �R30�, 5P39�, 3P608 US Electric Motor � �/8” Weil Pump Co. � �/8” �37-000-��9 Zoeller Co. � �/8” 65�0MS-358 Allis Chalmers 3/4” 607986(Type: C) Aqua Chem 3/4” 9�5-75�6 Aurora Pump 3/4” 7��-�004-753 Barnes, John S. 3/4” 6756� Burks Pumps 3/4” Carver 3/4” MODEL T�4C6 Cleaver Brooks 3/4” 9�5-65 Decatur Pump 3/4” 899� Dempster Ind. 3/4” 907-060403 Devilbiss 3/4” QM4509 Domestic Pump 3/4” �800�0 East Side Mfg. 3/4” Essick 3/4” 90�4009 Gorman Rupp 3/4” S-936, S-�575 Hydromatic Pump 3/4” 00�00-000-� Jacuzzi 3/4” �0-479 Kinney Vac Pump 3/4” KC�.5-�5, KS-�3, KC-5, KC-8(49�) Kinney Vac Pump 3/4” KC-5, KC-8(49�) Lancaster 3/4” �36� Montgomery Ward 3/4” �4�8� MP Pump 3/4” �5�5� Murphy Diesel 3/4” MD-4090 Peabody-Barnes 3/4” �5344, 6756� Robbins & Myers 3/4” 3�-03945-000 Service Filtration 3/4” 55-407 Sta Rite 3/4” U�09-99 Sterling Machinery 3/4” �6�6 US Electric Motor 3/4” PUL�� Vertiflow 3/4” SJ-2112-C1-00 Weil Pump Co. 3/4” �05-0�6-�0�

PUMP SEALS


SSC# FITS OEM DIA. FITS OEM#MS-359 Allis Chalmers 5/8” 5�-�04-945-804(Type: C) Bell & Gossett 5/8” �800�4 Carver 5/8” BB�0-� (NAMEPLATE) Continental Pump 5/8” V8-�5A, U8-�5Q Crane-Deming 5/8” 344�7 Decatur Pump 5/8” Doerr 5/8” Domestic Pump 5/8” �800�4 Dunham-Bush 5/8” S-47� East Side Mfg. 5/8” Everite 5/8” �584 Fairbanks Morse 5/8” Gorman Rupp 5/8” S-765 Ingersoll Rand 5/8” CPM-6�5�C� Jacuzzi 5/8” �0-478, �0-506 Myers, F.E. 5/8” ��447A National Ice Corp. 5/8” Oberdorfer 5/8” A5935 Osmonics Inc. 5/8” ��35�5 Peabody-Barnes 5/8” �8873A Perfecting 5/8” 73�0�5 (Division of Duff-Norton) Price Pump Co. 5/8” 84� Prosser Pump 5/8” �-3�00� Robbins & Myers 5/8” 3�-0�4�4 Sethco Mfg. 5/8” Skidmore 5/8” 506�5-� Somat Corp. 5/8” 54300 SPP Pump 5/8” Swaby Mfg. Co. 5/8” Taco 5/8” ��-009, ��-009 Teel Pump 5/8” �R304, �P567, 5P386 Wells Bloomfield 5/8” 35902 Worthington 5/8” 50675MS-36�-�� Gorman Rupp � �/4” S-335(Type: C) Luitweiler Pump � �/4” Paco � �/4” �4007099 Peerless � �/4” �657093, �663048 Teel Pump � �/4” 5P-374 Weinman � �/4” Q�6-�43-Y03MS-446 Gorman Rupp � 3/4” S-�8��(Type: C) Goulds Pumps � 3/4” 9�5�09�00� Hayward � 3/4” 46�50 Hydromatic Pump � 3/4” ��049-00�-� Paco � 3/4” K�04-� Reliance Electric � 3/4” 64�6�-��C Scot Pump � 3/4” �0�-000-�96 Sta Rite � 3/4” S-3�0�5 Stone Construction � 3/4” 377�8�H Swaby Mfg. Co. � 3/4” MS-50� Clayton Mark 5/8” �9304B(Type: A) Crane-Deming 5/8” 5/8 PACKAGE SEAL Decatur Pump 5/8” �0888 Everite 5/8” Fairbanks Morse 5/8” S6�5, 8�635-60,8�70�-75 McDonald, A.Y. 5/8” 5MCD4 Pac Fab 5/8” P�83��, 07�733 Purex 5/8” P�83��/07�733 Scot Pump 5/8” ��8-000-340D Sta Rite 5/8” ��8-000-340 Teel Pump 5/8” �R3�5, 5P4�0, 5P409 Toledo 5/8” A�4067 Weinman 5/8” Q�6-77MS-633 Gorman Rupp 5/8” �5�7�-8�4(Type: C) Ingersoll Rand 5/8” CPM-6�5�7� SPP Pump 5/8” Taco 5/8” �70-�0�RP,�600-�70RPMS-70� Goulds Pumps 5/8” �0K�, 70470-506�(Type: A) Goulds Pumps 5/8” 7�598-�06�, �0-83-��00 Metal Master 5/8” �5��0MS-756 Gorman Rupp � �/4” S-�6��(Type: C) Paco � �/4” SL-7094 Prosser Pump � �/4” �5 & 40HP MOD. 9-�603�-3 Teel Pump � �/4” 5P-396

SSC# FITS OEM DIA. FITS OEM# Weinman � �/4” Q�6-395-Y34MS-758 Allis Chalmers � �/�” 5�-��-870-80�(Type: C) Aurora Pump � �/�” 7��-�0�0-753 Clay Equipment � �/�” 0-90�7�9-0 Consol. Dies./Elect. � �/�” 0338-0�75 Construction Mach � �/�” Crane-Deming � �/�” 30884 Gorman Rupp � �/�” S-��50 Hale Products � �/�” �96-50��-03 Hobart Mfg. � �/�” Hydromatic Pump � �/�” 009�0-00�-� Jacuzzi � �/�” �0-�348-07 Myers, F.E. � �/�” ��9��A Nash Elmo � �/�” PK -79� Paco � �/�” SL-7�07 Peabody-Barnes � �/�” �4998 Price Pump Co. � �/�” MODEL E�50, E�00 Sigmund � �/�” SPP Pump � �/�” Stone Construction � �/�” 3769�, 3769��H Swaby Mfg. Co. � �/�” Taco � �/�” 950-67�RPMS-800 Flint & Walling 5/8” AC-�6,�3��00,�3�377(Type: C) Leland Faraday 5/8” LFP-333 TO 6�5,�4�07 TO �4��0 Teel Pump 5/8” �R307, 5P387, 5P-4��MS-978 Marlow � �/4” 4567�-�0 (Type: C)MS-�000 American Products 5/8” 397,0��,397,0�0(Type: B) American Products 5/8” 3970��, 3970�0 Ampro 5/8” AP-304D Ampro-Diaclear 5/8” AP-304D Anthony 5/8” 4380 Anthony 5/8” 4380 Aqua Flo 5/8” 9�509040, 9�500050 Atlantic Fluidics 5/8” Doughboy 5/8” 306-�00� East Side Mfg. 5/8” MODEL BTH Geco Sales 5/8” GG Industries 5/8” P-SEAL, 4/P-SEAL Gilbert Barker 5/8” K8��59X H & F Mfg. Co. 5/8” Lancaster 5/8” 5�3-6 Leland Faraday 5/8” MDL LFP-�075, ��00, ��50, ��00 Lomart 5/8” Pac Fab 5/8” P�83�3, 07�734 Polaris 5/8” P55 Premier 5/8” 3�-8�3 Purex 5/8” P�83�3/07�734 Sta Rite 5/8” U�09-�36SS Teel Pump 5/8” �R3�7, �R3�8, 5P368, 5P369 Waterway 5/8” 3�9-3�00BM Watts 5/8” Wayne Home Equip. 5/8” �5996/56�09 Weil Pump Co. 5/8” Wet Institute 5/8” �000MS-��3� Aqua Flo 5/8” 9�049000(Type: A) Hayward 5/8” SPX-�500-KAMS-��36 Vico 3/4” PPSFSEAL (Type: A)

PUMP SEALS

SEAL SETTING TOOL



Please see our Bell & Gossett and Taco sections on pages �8-4� for seals and replacement parts for those manufacturers. Also, please see our separate ��7 page Pool & Spa Parts Catalog for our complete listings of seals, gaskets, O-rings and motor parts for the Pool & Spa Industry.


GASKET SHEETS

This has been used successfully in the oil industry for over 20 years. It will seal oil or water. Temperature Rating: -20o F to 250o F

tan fiBer (for oil)

The most popular rubber for sealing water applications, it can be used on everything from pipe flanges to pump housings. Not to be put in contact with any petroleum product. Temperature Rating: -20o F to 170o F

SSC# SIZGS-3AGS-3BGS-3CGS-3DGS-3EGS-3FGS-3GGS-3HGS-3I

6” x 6” x �/�6” TH6” x 6” x �/8” TH

��” x ��” x �/�6” TH��” x ��” x �/8” TH��” x �4” x �/8” TH�8” x 36” x �/8” TH

�4” x �4” x �/�6” TH�4” x �4” x �/8” TH

�0” x 36” x �/�6” TH

red ruBBer (rainBoW PackinG)

This black rubber is ideal for sealing oil applications. It has a high nitrile content which means it is oil resistant. Temperature Rating: -40o F to 180o F

SSC# SIZEGS-�AGS-�BGS-�CGS-�DGS-�EGS-�FGS-�GGS-�HGS-�IGS-�JGS-�KGS-�LGS-�MGS-�NGS-�PGS-�Q

6” x 6” x �/3�” TH6” x 6” x �/�6” TH6” x 6” x 3/3�” TH6” x 6” x �/8” TH

��” x ��” x �/3�” TH��” x ��” x �/�6” TH��” x ��” x 3/3�” TH��” x ��” x �/8” TH

�4” x �4” x �/3�” TH�4” x �4” x �/�6” TH�4” x �4” x 3/3�” TH�4” x �4” x �/8” TH

�0” x 36” x �/3�” TH�0” x 36” x �/�6” TH�0” x 36” x 3/3�” TH�0” x 36” x �/8” TH

Buna-n ruBBer

GASKET SHEETS

Available in various thicknesses, SSC’s gasket sheets are perfect for emergency repairs and for replacing hard to find gaskets and washers. All materials can be cut into any shape or size. Available in the following materials and sizes:

The highest quality material of its kind, it can be used to seal applications involving oil or water. It will not shrink, stretch or lose bolt tension. Temperature Rating: -20o F to 250o F

SSC# SIZEGS-�AGS-�BGS-�CGS-�DGS-�EGS-�FGS-�GGS-�H

6” x 6” x �/3�” TH6” x 6” x �/�6” TH

��” x ��” x �/3�” TH��” x ��” x �/�6” TH�4” x �4” x �/3�” TH�4” x �4” x �/�6” TH�0” x 40” x �/3�” TH�0” x 40” x �/�6” TH

cork-ruBBer

hiGh density cork-ruBBer

This high grade material can be used in oil or water applications. It forms to imperfections on the flange and is very durable. Temperature Rating: -20o F to 250o F

SSC# SIZEGS-5AGS-5BGS-5CGS-5D

6” x 6” x �/3�” TH��” x ��” x �/3�” TH�4” x �4” x �/3�” TH�0” x 36” x �/3�” TH

Gasket cuttinG shearsThese high leverage shears give you extra powerful cutting power to make gasket cutting easy, especially when working with thick material.

GS-100SHHEAVY-DUTY SHEARS FOR CUTTING GASKET MATERIALMade of hot drop forged nickel-plated steel.

SSC# SIZEGS-4MGS-4AGS-4BGS-4NGS-4CGS-4DGS-4PGS-4EGS-4FGS-4QGS-4GGS-4H

6” x 6” x �/64” TH6” x 6” x �/3�” TH6” x 6” x �/�6” TH

��” x ��”x �/64” TH��” x ��” x �/3�” TH��” x ��” x �/�6” TH�4” x �4” x �/64” TH�4” x �4” x �/3�” TH�4” x �4” x �/�6” TH�0” x 40” x �/64” TH�0” x 40” x �/3�” TH�0” x 40” x �/�6” TH


GASKET SHEETStan fiBer (for Water)

This fiber material is designed to be used in applications involving the sealing of water. Especially good for pump housings and flanges. Not to be used in oil applications. Temperature Rating: -20o F to 250o F

SSC# SIZEGS-6AGS-6BGS-6CGS-6DGS-6EGS-6FGS-6GGS-6H

6” x 6” x �/3�” TH6” x 6” x �/�6” TH


Black fiBer

This material for higher temperatures can be used in oil or water. It is frequently used for applications like steam and hot water. Temperature Rating: -20o F to 350o F


6” x 6” x �/3�” TH6” x 6” x �/�6” TH


Black fiBer With anti-stick coatinG

Same as black fiber except with the added feature of anti-stick coating. This allows easy removal from flanges.Temperature Rating: -20o F to 350o F


6” x 6” x �/3�” TH6” x 6” x �/�6” TH


non-asBestos

This is the most popular material used for pipe flange gaskets and gaskets used in higher pressure applications. Excellent with water but not with oil/petroleum product. Temperature Rating: -200o F to 572o F


6” x 6” x �/�6” TH6” x 6” x �/8” TH

��” x ��” x �/�6” TH��” x ��” x �/8” TH

�4” x �4” x �/�6” TH�4” x �4” x �/8” TH

�0” x 36” x �/�6” TH�0” x 36” x �/8” TH

neoPreneThis black rubber is the most popular rubber in the world. Automobile tires are made of neoprene. Very effective in sealing water, it will not dry out or harden as fast as Red Rubber. Do not use this rubber in oil/petroleum product as it will swell up and then break down. Temperature Rating: -20o F to 170o F

SSC# SIZEGS-�0AGS-�0BGS-�0CGS-�0DGS-�0EGS-�0FGS-�0GGS-�0HGS-�0IGS-�0JGS-�0KGS-�0LGS-�0MGS-�0NGS-�0PGS-�0QGS-�0RGS-�0SGS-�0TGS-�0UGS-�0VGS-�0WGS-�0XGS-�0YGS-�0TAGS-�0TBGS-�0TCGS-�0TD

6” x 6” x �/3�” TH6” x 6” x �/�6” TH6” x 6” x 3/3�” TH6” x 6” x �/8” TH

6” x 6” x 3/�6” TH6” x 6” x �/4” TH

��” x ��” x �/3�” TH��” x ��” x �/�6” TH��” x ��” x 3/3�” TH��” x ��” x �/8” TH

��” x ��” x 3/�6” TH��” x ��” x �/4” TH

�4” x �4” x �/3�” TH�4” x �4” x �/�6” TH�4” x �4” x 3/3�” TH�4” x �4” x �/8” TH

�4” x �4” x 3/�6” TH�4” x �4” x �/4” TH

�0” x 36” x �/3�” TH�0” x 36” x �/�6” TH�0” x 36” x 3/3�” TH�0” x 36” x �/8” TH

�0” x 36” x 3/�6” TH�0” x 36” x �/4” TH��” x �4” x �/8” TH��” x �4” x �/4” TH�8” x 36” x �/8” TH�8” x 36” x �/4” TH

ePdMThe “Cadillac” of rubber, this black rubber will withstand higher heat and tends not to dry out or harden in extreme environments. This is the material of choice for higher heat steam applications such as boiler handhole and manhole gaskets. Temperature Rating: -40o F to 225o F

SSC# SIZEGS-��AGS-��BGS-��CGS-��DGS-��EGS-��FGS-��GGS-��HGS-��JGS-��KGS-��LGS-��M

6” x 6” x �/8” TH6” x 6” x �/4” TH

��” x ��” x �/8” TH��” x ��” x �/4” TH�4” x �4” x �/8” TH�4” x �4” x �/4” TH�0” x 36” x �/8” TH�0” x 36” x �/4” TH��” x �4” x �/8” TH��” x �4” x �/4” TH�8” x 36” x �/8” TH�8” x 36” x �/4” TH

Don’t Forget - Tankless Heater Gaskets are available in EPDM rubber. While more expensive, EPDM will give your gaskets longer life.


White Buna-n ruBBer

This material has the same properties as the black Buna-N. It is a high grade material and will not stain equipment.Temperature Rating: -25o F to 220o F

SSC# SIZEGS-�4AGS-�4BGS-�4CGS-�4D

6” x 6” x 3/3�” TH��” x ��” x 3/3�” TH�4” x �4” x 3/3�” TH�0” x 36” x 3/3�” TH

fiBerGlass sheets

This high temperature material (good to 1000oF) is perfect for most gasketing or insulating applications involving boilers and furnaces. Temperature Rating: -20o F to 1000o F


6” x 6” x �/8” TH��” x ��” x �/8” TH�7” x �4” x �/8” TH�7” x 36” x �/8” TH

GASKET SHEETS

aluMinized hiGh teMPerature cloth

Rated at 2300o, this material is excellent as a thermal barrier. It is used primarily as a flame shield when welding or soldering. Temperature Rating: -20o F to 2300o F


6” x 6” x �/3�” TH��” x ��” x �/3�” TH�4” x �4” x �/3�” TH �0” x 36” x �/3�” TH

shiM stock MaterialUse this material to shim up an area in small increments.

SSC# COLOR SIZE GS-�6AGS-�6BGS-�6CGS-�6DGS-�6EGS-�6FGS-�6GGS-�6HGS-�6JGS-�6KGS-�6LGS-�6M

6” x 6” x .00�” TH��” x ��” x .00�” TH�0” x 50” x .00�” TH

6” x 6” x .003” TH��” x ��” x .003” TH�0” x 50” x .003” TH

6” x 6” x .004” TH��” x ��” x .004” TH�0” x 50” x .004” TH

6” x 6” x .005” TH��” x ��” x .005” TH�0” x 50” x .005” TH

ORANGEORANGEORANGECREAMCREAMCREAMCLEARCLEARCLEARPURPLEPURPLEPURPLE

FULL ROLLS OF NEOPRENE RUBBER

GS-10TX1/16” THICKNEOPRENE RUBBER100 lb Roll

GS-10TY1/8” THICKNEOPRENE RUBBER100 lb Roll

FULL ROLLS OF BUNA-N RUBBER

GS-2Y1/16” THICKBUNA-N RUBBER100 lb Roll

GS-2Z1/8” THICKBUNA-N RUBBER100 lb Roll

FULL ROLLS OF RED RUBBER (RAINBOW PACKING)

GS-3Y1/16” THICK RED RUBBERRAINBOW PACKING100 lb Roll

GS-3Z1/8” THICK RED RUBBERRAINBOW PACKING100 lb Roll

We stock Blower Parts such as V-Belts, Pulleys, Blower Shafts as well as Pillow, Oil and Sealed Blower Bearings. Please see pages �5-�6.



GAUGES

PRESSURE, VACUUM & COMPOUND GAUGES

SSC’s gauges are constructed with a steel case painted black, all brass internals and a glass lens. Competitively priced, the styles to choose from are pressure, vacuum or compound.

Pressure GauGes

INDIVIDUALLY BOXED

SSC# DIAL SIZE MOUNT PRESSURE

LM = LOWER MOUNTCBM = CENTER BACK MOUNT

�0�90��0�903�0�904�0�905�0�907�0�9��0�9��0�9�3�0�9�4�0�9�5�0�9�6�0�9�7�0300��0300��0�99��03003�0�99��0�993�03004�0�994�0�995�030��030�3�030�4�030�5�030�6�030�7�030�8�030�9�030�3�030�4�030�5�030�6�030�7�030�8�030�9�030�0�030��0303��0303��03033�03034�03035

SSC# DIAL SIZE MOUNT PRESSURE�03036�03037�03039�0304��03008�03009�030�0�0304��030��030��03043�03044�03�04�03�05�03�06�03�07�03�08�03�09�03��0�03��03��03099�03�00�03�0��03�0��03��0�03��03��03��3�03��4�03�00�03�0��03�03�03�04�03�05�03�06�03�07�03�08�03�09�03�0��03��03��03��3�03��4�03��5�03��6�03��7�0330��0330��03303�03304�03305�03306�03307�03308�03309�033��033�3�033�4�033�5�033�6�033�7

�”�”�”�”�”

� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”

�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”

�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM

�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM

�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM

3060

�00�60300�53060

�00�60�00300�53060

�00�60�00300400600�53060

�00�60�00300400�53060

�00�60�00300400600�53060

�00�60

�”�”�”�”�”�”�”�”�”�”�”�”

� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”3 �/�”4 �/�”4 �/�”4 �/�”4 �/�”4 �/�”4 �/�”4 �/�”4 �/�”4 �/�”4 �/�”4 �/�”4 �/�”4 �/�”4 �/�”4 �/�”

�/8” CBM�/8” CBM�/8” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM

�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM

�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM

�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM

�00300600�53060

�00�60�00300400600�53060

�00�60�00300400600�53060

�00�60�00300400600�53060

�00�60�003004006003060

�00�60�00300400600�53060

�00�60�003004006003060

�00�60�00300


GAUGES

VacuuM GauGes

INDIVIDUALLY BOXED

SSC# DIAL SIZE MOUNT VACUUM�04990�0499��0500��0500��05003�05004�050��050��

� �/�”� �/�”

�”�”�”�”

� �/�”� �/�”

�/8” LM�/8” CBM�/8” LM�/4” LM

�/8” CBM�/4” CBM�/4” LM

�/4” CBM

3030303030303030

coMPound GauGes

INDIVIDUALLY BOXED

SSC# DIAL SIZE MOUNT VAC / PRESS�0�000�0�00��0�00��0�003�0�97��0�97��0�973�0�974�0�99��0�99��0�993�0�994�0�98��0�98��0�983�0�984�0�0��0�0��0�0�3�0�0�4�0�0��0�0��0�0�3�0�0�4�0�03��0�03��0�033

�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”

� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”3 �/�”3 �/�”3 �/�”

�/8” LM�/8” LM�/8” LM�/8” LM�/4” LM�/4” LM�/4” LM�/4” LM

�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” LM�/4” LM�/4” LM�/4” LM

�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” LM�/4” LM�/4” LM

30 / 3030 / 6030 / �5030 / 30030 / 3030 / 6030 / �5030 / 30030 / 3030 / 6030 / �5030 / 30030 / 3030 / 6030 / �5030 / 30030 / 3030 / 6030 / �5030 / 30030 / 3030 / 6030 / �5030 / 30030 / 3030 / 6030 / �50

PLASTIC CASE GAUGES

Our plastic case gauges are corrosion and weather resistant. They can be used in extreme environmental situations such as outdoor use or very wet areas where a standard gauge might rust. These economical gauges are constructed with a plastic case, a plastic lens and all brass internals.

Plastic case Pressure GauGes

INDIVIDUALLY BOXED

SSC# DIAL SIZE MOUNT PRESSURE�030�3PL�030�4PL�030�5PL�030�6PL�030�7PL�030�8PL�030�9PL�0304�PL�03008PL�03009PL�030�0PL�0304�PL�030��PL�030��PL

�0500�PL�05004PL

�”�”�”�”�”�”�”�”�”�”�”�”�”�”

�”�”

�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM

�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM

�/4” LM�/4” CBM

�53060

�00�60�00300�53060

�00�60�00300

30VAC30VAC

Plastic case VacuuM GauGes

Liquid Filled Gauges start on next page.

Hose Parts are listed on pages 83-84.


GAUGES

LIQUID (GLYCERIN) FILLED GAUGESSSC’s glycerin filled gauges are good for applications where there is a lot of movement. The liquid inside the gauge acts as a vibration and pulsation damper giving the technician a more accurate read. They are constructed with a stainless steel case, a plastic lens and all brass internals.

liquid filled Pressure GauGes

INDIVIDUALLY BOXED

SSC# DIAL SIZE MOUNT PRESSURE


�0030��0030��00303�00304�00305�00306�00307�003�0�003��003��003�3�003�4�003�5�003�6�003�8�0033��00333�00334�00335�00336�00337�00339�00340�0034��0034��00343�00344�00345�00346�00348�00350�0035��0035��00353�00354�00355�00357�00358�00359�00360�0036��0036��00363

� �/�”� �/�” � �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”

�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”�”

�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM

�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM�/8” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM

�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/8” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM

�53060

�00�60�00300�53060

�00�60�003006003060

�00�60�00300600�53060

�00�60�003006003060

�00�60�00300600�53060

�00�60�00

SSC# DIAL SIZE MOUNT PRESSURE�00364�00366�0038��0038��00383�00384�00385�00386�00387�00388�00389�00390�0039��0039��00393�00394�00395�00396�00397�00398�004�0�004��004��004�3�004�4�004�5�004�6�004�7�004�8�004�9�004�0�004��004��004�3�004�4�004�5�004�6�004�7

�0046��0046��00463�00464�00465�00466�00467�00468�00469

�”�”

� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”

4”4”4”4”4”4”4”4”4”4”4”4”4”4”4”4”4”4”

� �/�”�”�”�”�”

� �/�”� �/�”

4”4”

�/4” CBM�/4” CBM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM

�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM

�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM�/4” CBM

�/8” CBM�/8” LM�/4” LM

�/8” CBM�/4” CBM�/4” LM

�/4” CBM�/4” LM

�/4” CBM

300600�53060

�00�60�00300400600�53060

�00�60�00300400600�53060

�00�60�00300400600�53060

�00�60�00300400600

30VAC30VAC30VAC30VAC30VAC30VAC30VAC30VAC30VAC

liquid filled VacuuM GauGes

Liquid Filled Compound Gauges start on next page...

If we are missing the gauge you need let us know and we’ll try to get it.


GAUGES

106001WATER TEST GAUGE2 1/2” Dial Size3/4” Female Garden Hose Connection; 0-300 PSIMade of all brass internals, brass fitting, plastic body and plastic lens.INDIVIDUALLY BOXED

With lazy hand

INDIVIDUALLY BOXED

106002WATER TEST GAUGE WITH LAZY HAND2 1/2” Dial Size3/4” Female Garden Hose Connection; 0-300 PSIMade of all brass internals, brass fitting, plastic body and plastic lens.

The regular pressure hand pushes the lazy hand to the peak operating or surge pressure point where it remains until you manually reset it. The lazy hand comes in handy when you have to determine if equipment is malfunctioning due to intermittent surging pressure.

Brass adaPter for Water test GauGe Use this adapter to turn any gauge you have on hand temporarily into a water test gauge.

106005BRASS ADAPTER FORWATER TEST GAUGE3/4” female garden hoseconnection x 1/4” female fitting.

WATER TEST GAUGES

SSC# DIAL SIZE MOUNT VAC / PRESS.liquid filled coMPound GauGes

�00�05�00��5�00�50�00�5��00�5��00�53�00�54�00�55�00�56�00�57�00�70�00�7��00�7��00�73�00�74�00�75�00�76�00�77

� �/�”�”

� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”

4”4”4”4”4”4”4”4”

�/8” CBM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM

�/4” CBM�/4” CBM�/4” CBM�/4” CBM �/4” LM�/4” LM�/4” LM�/4” LM

�/4” CBM�/4” CBM�/4” CBM�/4” CBM

30 / 3030 / 3030 / 3030 / 6030 / �5030 / 30030 / 3030 / 6030 / �5030 / 30030 / 3030 / 6030 / �5030 / 30030 / 3030 / 6030 / �5030 / 300

GAS TEST GAUGES

SSC’s Gas Test Gauges feature a horizontal and vertical 3/4” FIP chrome plated steel block with a 1/8” chrome air valve with plastic cap.

HORIZONTAL TYPE SHOWNINDIVIDUALLY BOXED

SSC# DIAL SIZE PRESSURE GAS TEST MOUNT�066��066��066�3�0663��0663��06633

�”�”�”�”�”�”

3060

�003060

�00

HORIZONTALHORIZONTALHORIZONTAL

VERTICALVERTICALVERTICAL

chroMe Plated steel Block for Gas test GauGes

106650HORIZONTAL BODYONLY FOR GAS TESTGAUGESChrome plated steel block with an air valve andplastic cap; 3/4” FIP.

106652VERTICAL BODYONLY FOR GAS TESTGAUGESChrome plated steel block with an air valve andplastic cap; 3/4” FIP.

FIRE SPRINKLER GAUGES

SSC# DESCRIPTION�067�0�067��

300LB, 3 �/�” DIAL, �/4” LM, BRASS CASE300LB, 3 �/�” DIAL, �/4” LM, PLASTIC CASE

INDIVIDUALLY BOXED

SSC stocks a complete line of Brass Flare Fittings and Brass Compression Fittings. Please see pages 85-88.


DIA. GAGE/TRIDICATORS/THERMOMETERS

TRIDICATORS(PRESSURE / TEMPERATURE GAUGES)

SSC’s Tridicators are designed to withstand the extreme conditions found in all hot water heating boilers. These combination temperature and pressure gauges give you an accurate temperature and pressure read similtaneously.

SSC# DIAL TYPE MOUNT PRES. TEMP.

ALL INDIVIDUALLY BOXED

�0650��06505�065�0�065�5�06550�06555�06556

3 �/4” ROUND3 �/4” ROUND� �/�” ROUND� �/�” ROUND

3 �/4” SQUARE3 �/4” SQUARE3 �/�” SQUARE

�/�” CBM�/�” LM

�/4” CBM�/4” CBM-L.S.

�/�” LM�/�” CBM�/�” CBM

757575757575

�00

60-�6060-�6070-3�070-3�075-�6075-�6070-3�0


L.S. = LONG SHANK - 3” LENGTH

THERMOMETERS

GLASS TUBE TYPESTRAIGHT

GLASS TUBE TYPEANGLE

DIAL TYPEANGLE

POCKET TYPE

ALL INDIVIDUALLY BOXED

SSC# TYPE WELL TEMP. CONNECTION�07�0��07�0��07��07��07��07�3��07�3�

GLASS TUBEGLASS TUBEGLASS TUBEGLASS TUBE

DIAL TYPEPOCKETPOCKET

STEELBRASSSTEELBRASSBRASS

----

60O - �60O

60O - �60O

60O - �60O

60O - �60O

60O - �60O

-40O - �60O

0O - ��0O

STR-�/�” LMSTR-�/�” LM

ANG-�/�” LBMANG-�/�” LBMANG-�/�” LBM

�” DIAL�” DIAL

STR = STRAIGHTANG = ANGLE

LM = LOWER MOUNTLBM = LOWER BACK MOUNT

LOW PRESSURE DIAPHRAGM GAUGES (MANOMETERS)

These gauges feature a highly sensitive capsule type diaphragm to measure extremely low positive or negative pressure applications such as gas feed systems. These are a required test gauge for building code inspection in many municipalities.

INDIVIDUALLY BOXED

SSC# DIAL SIZE MOUNT PRESSURE�0680��0680��06803�068��068��068��068��068�3�068�4�068�5�068�6�068�7�06850

� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”� �/�”

�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM�/4” LM

3 PSI5 PSI

�0 PSI�0 OZ./35” WC35 OZ./60” WC

0-�0” WC0-�5” WC0-30” WC0-60” WC

0-�00” WC0-�60” WC0-�00” WC

30-0” WC(VAC) SNUBBERSSnubbers even out spikes in pressure for a more accurate reading.

106868STAINLESS STEEL SNUBBER FOR GAUGES1/4” Female NPT x1/4” Male NPT

106870BRASS SNUBBER FOR GAUGES1/4” Female NPT x1/4” Male NPT

106872BRASS SNUBBER FOR GAUGES1/2” Female NPT x1/2” Male NPT

Screw these plugs into the line and use the needle adapter shown on next page to read the pressure.

106860GAUGE TEST PLUGBrass Body, Rubber Core1/4” Male NPT

106862GAUGE TEST PLUGBrass Body, Rubber Core1/2” Male NPT

TEST PLUGS


Use SSC’s Needle Adapters to read the pressure in a pipe or line with a gauge test plug on it. It is similar to blowing up a ball with a needle on an air pump.

106863NEEDLE ADAPTER FORREADING PRESSURE THROUGH TEST PLUGS1/4” Female NPT x 1/8”Diameter Needle

1/4” IPS FULL PORT BRASS BALL VALVEThe 1/4” ball valve is handy to have when a service technician wishes to permanently leave a gauge on a piece of equipment. Just install the valve, attach the gauge to the valve and turn the valve on or off when you wish to get a reading.

1221301/4” IPS FULL PORTBALL VALVE600 WOG

NEEDLE ADAPTER

BRASS ADAPTER FITTINGS FOR GAUGESOur Brass Adapter Fittings are handy to have in case the service technician needs to convert the pipe thread size for the gauge opening on the equipment he is working on to another size to fit the particular gauge he has in his tool box.

BRASS

SSC# CONVERTS THESE PIPE THREADS�06875�06876�06878�06880�0688��06884�06886�06888�06890

�/8” MALE TO �/4” FEMALE�/4” MALE TO �/8” FEMALE3/8” MALE TO �/8” FEMALE3/8” MALE TO �/4” FEMALE�/�” MALE TO �/8” FEMALE�/�” MALE TO �/4” FEMALE3/4” MALE TO �/8” FEMALE3/4” MALE TO �/4” FEMALE

�” MALE TO �/4” FEMALE

NEEDLE VALVES

SSC’s needle valves are handy to use when leaving gauges on equipment. Open the valve to test pressure and turn off when not in use.

BRASS

FIP x FIP FIP x MIP

SSC# SIZE��040��04��046��048

�/8” FIP x �/8” FIP�/4” FIP x �/4” FIP�/8” FIP x �/8” MIP�/4” FIP x �/4” MIP

SCHRADER VALVEThis bicycle type air valve allows the service technician to enter air into any system with a compressor or hand pump. It’s handy for pressure testing tanks, plumbing systems, pipe, etc.

107140SCHRADER VALVE1/8” NPT

DRAIN COCKS / AIR BLEEDER VALVESinternal seat

BRASS

SSC# SIZE��070��07��074

�/8”�/4”3/8”

PIGTAIL STEAM SYPHONSstraiGht

PT-711STRAIGHT PIGTAILSTEAM SYPHONBlack Iron1/4” I.P.S.

PT-712STRAIGHT PIGTAILSTEAM SYPHONBrass1/4” I.P.S.

anGle

PT-714ANGLE (90O) PIGTAILSTEAM SYPHONBlack Iron1/4” I.P.S.

PT-715ANGLE (90O) PIGTAILSTEAM SYPHONBrass1/4” I.P.S.

SELF-TAPPING SADDLE VALVE

122600SELF-PIERCINGSADDLE VALVEConnects 1/4” bleed lines to copper tubing from 3/8” to 1 3/8”.

INDIVIDUALLY BAGGED

BRASS PLUGSUse SSC’s solid brass plugs for plugging air-relief valves, drain openings, etc. Similar to our drain cocks except solid.

SSC# SIZE��080��08��084

�/8”�/4”3/8”

BRASS

GAUGE ACCESSORIES


BALL VALVES / GAS COCKS / PACKING

AGA / CSA APPROVED BRASSBALL VALVE GAS COCK



FULL PORT FORGED BRASS BALL VALVES - 600 WOG

iPs

SSC# SIZE��30��3��34��36��38��40��4��44

�/4”3/8”�/�”3/4”�”� �/4”� �/�”�”

- Full Port- 600 WOG / 150 WSP- Forged Brass- Yellow Vinyl Covered Handle

c x c- Full Port- 600 WOG / 150 WSP- Forged Brass- Yellow Vinyl Covered Handle

SSC# SIZE��04��06��08��0��4

�/�”3/4”�”� �/4”� �/�”�”

PVC BALL VALVESiPs

SSC# SIZE��3�4��3�6��3�8��330��33��334

�/�”3/4”�”� �/4”� �/�”�”

solVent WeldSSC# SIZE��354��356��358��360��36��364

�/�”3/4”�”� �/4”� �/�”�”

� PIECE CONSTRUCTION�/4 TURN OPERATION

� PIECE CONSTRUCTION�/4 TURN OPERATION

SINGLE UNION PVC BALL VALVESSSC’s Single Union Ball Valves are lightweight and compact and designed for Pool & Spa installations. The full port ball valve gives minimum pressure drop and the valves are rated at 225 psi test pressure and 150 psi working pressure.

NIPPLE END

SSC# SIZE��0�70��0�7��0�80��0�8��0�90��0�9�

� �/�” SOLVENT END�” SOLVENT END

� �/�” IPS (FIP)�” IPS (FIP)

� �/�” NIPPLE END-SOLVENT� �/�” NIPPLE END-THREADED

SOCKET / IPS (FIP) END

MECHANICAL PACKING - GRAPHITE AND TEFLON

SSC’s packing can be used to seal shafts, valve plugs and other general service applications.

PACKED IN � LB. SPOOLS& INDIVIDUALLY BOXED

SSC# TYPE SIZE FT/LB TEMP.PAC-30APAC-30BPAC-30CPAC-30DPAC-30EPAC-30FPAC-3�APAC-3�BPAC-3�CPAC-3�DPAC-3�EPAC-3�F

GRAPHITEGRAPHITEGRAPHITEGRAPHITEGRAPHITEGRAPHITE

TEFLONTEFLONTEFLONTEFLONTEFLONTEFLON

�/8”3/�6”�/4”

5/�6”3/8”�/�”�/8”

3/�6”�/4”

5/�6”3/8”�/�”

�0�60�5

�4.��05.7

75.534.3�0.9�3.48.76

550o

550o

550o

550o

550o

550o

500o

500o

500o

500o

500o

500o

BRASS COMPRESSION BALL VALVESSSC’s Brass Compression Ball Valves will fit copper tubing.

SSC# COPPER PIPE ��84��86��88

�/�” (5/8” OD)3/4” (7/8” OD)�” (� �/8” OD)600 WOG


BOILER DRAINS / SILLCOCKS

BOILER DRAINS

Male iron PiPe

122408BOILER DRAIN WITHSTUFFING BOX3/4” Hose EndBrass1/2” MIP

122410BOILER DRAIN WITHSTUFFING BOX3/4” Hose EndBrass3/4” MIP

STOP AND WASTE VALVES

122606STOP AND WASTE VALVEWith Bleeder CapBrass1/2”

c x c

122608STOP AND WASTE VALVEWith Bleeder CapBrass3/4”

feMale iron PiPe

122404BOILER DRAIN WITHSTUFFING BOX3/4” Hose EndBrass1/2” FIP

stoP and Waste caP

122620STOP AND WASTE CAP5/16” x 24TIncludes WasherBrass

4-WAY SILLCOCK KEY

1110204-WAY SILLCOCK KEYFits 1/4”, 9/32”, 5/16”, 11/32”

HOSE BIBBS

CHROME PLATED BRASS

SSC# TYPE SIZE�600�0�600�0�60030�60035

3/4” HOSE END3/4” HOSE END

PLAIN ENDPLAIN END

�/�” MIP3/4” MIP�/�” MIP3/4” MIP

ANGLE SILLCOCKSfeMale iron PiPe

122544ANGLE SILLCOCK3/4” Hose OutletBrass1/2” FIP

122546ANGLE SILLCOCK3/4” Hose OutletBrass3/4” FIP

c x c122540ANGLE SILLCOCK3/4” Hose OutletBrass1/2” C x C

122542ANGLE SILLCOCK3/4” Hose OutletBrass3/4” C x C

FROST FREE SILLCOCKS

CHROME PLATED BRASS

SSC# DESCRIPTION LENGTH��505��507��509��5��

�/�” MIP x �/�” CxC�/�” MIP x �/�” CxC�/�” MIP x �/�” CxC�/�” MIP x �/�” CxC

6”8”

�0”��”


��5�5��5�7��5�9��53�

ANTI-SYPHON FROST FREE SILLCOCKS

CHROME PLATED BRASS

SSC# DESCRIPTION LENGTH�/�” MIP x �/�” CxC�/�” MIP x �/�” CxC�/�” MIP x �/�” CxC�/�” MIP x �/�” CxC

6”8”

�0”��”

HOSE BACKFLOW PREVENTER

122570HOSE BACKFLOWPREVENTER (Vacuum Breaker)Rough Brass3/4” female hose x 3/4” malewith break-off set screw.

CHECK VALVES/COMPRESSION COUPLINGS

SEWAGE EJECTOR CHECK VALVEcoMBination size - fits 1 1/4” & 1 1/2” iPs

121170SEWAGE EJECTORCHECK VALVEPlastic valve body withrubber ends and hose clamps.Combination Size: 1 1/4” &1 1/2” IPS

PVC COMPRESSION COUPLINGS - LONG PATTERN

SSC# DESCRIPTION PIPE SIZE��4��6��8��30��3�

LONG PATTERNLONG PATTERNLONG PATTERNLONG PATTERNLONG PATTERNLONG PATTERN

�/�”3/4”�”� �/4”� �/�”�”

GALVANIZED COMPRESSION COUPLINGS- LONG PATTERN

SSC# DESCRIPTION PIPE SIZE��53��55��57��59��6��63

LONG PATTERNLONG PATTERNLONG PATTERNLONG PATTERNLONG PATTERNLONG PATTERN

�/�”3/4”�”� �/4”� �/�”�”

BRASS SWING CHECK VALVES

SSC# SIZE��004��006��008��0�0��0��0�4��03��034��036��038��040��04�

�/�” CxC3/4” CxC�” CxC� �/4” CxC� �/�” CxC�” CxC�/�” IPS3/4” IPS�” IPS� �/4” IPS� �/�” IPS�” IPS

Our brass swing check valves have a hinged flap and can be used in water or oil applications.

IPS C x C

IPS

PVC CHECK VALVES - SPRING LOADED

SSC# SIZE��3��50��5�

� �/�” IPS� �/�” SOLVENT

�” SOLVENT

SOLVENT WELD

PVC SCHEDULE 40 UNIONS

SSC# SIZE� �/�” IPS-FEMALE THREAD

�” IPS-FEMALE THREAD� �/�” SOLVENT

�” SOLVENT� �/�” SOLVENT X IPS-FEM. THD �” SOLVENT X IPS-FEM. THD

��0�30��0�3��0�50��0�5��0�60��0�6�

SOLVENTIPS SOLVENT X IPS


PIPE COUPLINGS / ESCUTCHEONS

NO-HUB COUPLINGSSSC’s no-hub pipe couplings are used to join no-hub cast iron soil pipe and fittings. A stainless steel corrugated shield and hose clamps are assembled over a molded neoprene sleeve to give you a strong, positive seal every time.

SSC# PIPE SIZE��0300��030��0304��0306��03�0

� �/�” x � �/�”�“ x � �/�”

�” x �”3” x 3”4” x 4”

FLEXIBLE PIPE (TRANSITION) COUPLINGSOur pipe couplings will fit over plastic and cast iron pipe. They feature all stainless steel clamps and thick-walled neoprene sleeves for strength, durability and an easy installation.

SSC# PIPE SIZE��0�54��0�58��0�64��0�70��0�7�

� �/�” x � �/�”�” x �”3” x 3”4” x 3”4” x 4”

FLEXIBLE PIPE TEST (CLEAN-OUT) CAPS

NEOPRENE RUBBERSTAINLESS CLAMP

SSC# PIPE SIZE� �/�”

�”3”4”

��0380��038��0384��0386

TEST PLUGS (DOLLAR PLUGS)

GALVANIZED STEEL FLANGEMOLDED RUBBER GASKET

SSC# PIPE SIZE� �/�”

�”3”4”

��0�0��0�04��0�06��0�08

RAISED HEAD BRASS CLEANOUT PLUG

CAST BRASS

SSC# SIZE��0�0��0�04��0�06��0�08��0��0��0��

� �/�”�”

� �/�”3”

3 �/�”4”

PLASTIC SPLIT-RING FLOOR & CEILING PLATES (ESCUTCHEONS)

Sure-grip, non-breakable, 100% rustproof, easy to use, beautifully plated and non-corrosive are some of the reasons to use SSC’s plastic split-ring floor and ceiling plates. They can be used on most sized pipe - hot or cold.

chroMe Plated - for iron PiPe

chroMe Plated - for coPPer tuBinG

White - for iron PiPe

White - for coPPer tuBinG

Polished Brass finish

SSC# DESCRIPTION SIZE PKG.��0690��069��0695��0696

��060��0604��0606��0608��06�0��06��06�4��06�6��06�8��06�0��06��

SSC# DESCRIPTION SIZE PKG.CHROME FINISHCHROME FINISHCHROME FINISHCHROME FINISHCHROME FINISHCHROME FINISHCHROME FINISHCHROME FINISHCHROME FINISHCHROME FINISHCHROME FINISH

3/8” IPS�/�” IPS3/4” IPS�” IPS

� �/4” IPS� �/�” IPS

�” IPS� �/�” IPS

3” IPS4” IPS6” IPS

��6

SSC# DESCRIPTION SIZE PKG.��0640��064��0644��0646��0648

CHROME FINISHCHROME FINISHCHROME FINISHCHROME FINISHCHROME FINISH

�/�” COP3/4” COP�” COP

� �/4” COP� �/�” COP

��

SSC# DESCRIPTION SIZE PKG.��0660��066��066��0663��0664��0665��0666��0667��0668��0669

WHITE FINISHWHITE FINISHWHITE FINISHWHITE FINISHWHITE FINISHWHITE FINISHWHITE FINISHWHITE FINISHWHITE FINISHWHITE FINISH

3/8” IPS�/�” IPS3/4” IPS�” IPS

� �/4” IPS� �/�” IPS

�” IPS� �/�” IPS

3” IPS4” IPS

��

SSC# DESCRIPTION SIZE PKG.��0675��0676��0677��0678��0679

WHITE FINISHWHITE FINISHWHITE FINISHWHITE FINISHWHITE FINISH

�/�” COP3/4” COP�” COP

� �/4” COP� �/�” COP

��

POLISHED BRASS FINISHPOLISHED BRASS FINISHPOLISHED BRASS FINISHPOLISHED BRASS FINISH

3/8” IPS�/�” IPS�/�” COP3/4” COP

��


HINGED PIPE REPAIR CLAMPS

SSC# PIPE SIZE��0350��035��0354��0356��0358��0360

�/�”3/4”�”

� �/4”� �/�”

�”

STAINLESS STEEL HOSE CLAMPS WITH PLATED STEEL SCREW

- 304 series stainless steel band- 430 series stainless steel housing- Plated steel screw- 1/2” wide band- Packed 10 clamps in a box

SSC# CLAMP# SIZE��0506��0508��05�0��05��05�6��05�0��05�4��05�8��053��0536��0540��0544��0548��055��0556��0560��0564��057�

68�0��6�0�4�83�364044485�5660647�

3/8” to 7/8”7/�6” to �”

9/�6” to � �/�6”��/�6” to � �/4”�3/�6” to � �/�”�3/�6” to � 3/4”

��/�6” to �”� 5/�6” to � �/4”� 9/�6” to � �/�”� �3/�6” to � 3/4”

� �/�6” to 3”� 5/�6” to 3 �/4”� 9/�6” to 3 �/�”� �3/�6” to 3 3/4”

3 �/�6” to 4”3 5/�6” to 4 �/4”3 9/�6” to 4 �/�”

4 �/8” to 5”

HOSE CLAMPS

STAINLESS STEEL HOSE CLAMPS WITH STAINLESS STEEL SCREW

PACKED �0/BOX PACKED �0/BOX

- 304 series stainless steel band- 304 series stainless steel housing- 302 series stainless steel screw- Commonly known as “Marine Grade”- 1/2” wide band- Packed 10 clamps in a box

SSC# CLAMP# SIZE��0406��0408��04�0��04��04�6��04�0��04�4��04�8��043��0436��0440��0444��0448��045��0456��0460��0464��047�

68

�0��6�0�4�83�364044485�5660647�

3/8” to 7/8”7/�6” to �”

9/�6” to � �/�6”��/�6” to � �/4”�3/�6” to � �/�”�3/�6” to � 3/4”

��/�6” to �”� 5/�6” to � �/4”� 9/�6” to � �/�”

� �3/�6” to � 3/4”� �/�6” to 3”

� 5/�6” to 3 �/4”� 9/�6” to 3 �/�”

� �3/�6” to 3 3/4”3 �/�6” to 4”

3 5/�6” to 4 �/4”3 9/�6” to 4 �/�”

4 �/8” to 5”

MINI HOSE CLAMPS

With Plated steel screW

- 304 series stainless steel band- 430 series stainless steel housing- Plated steel screw- 5/16” wide band- Packed 10 clamps in a box

SSC# CLAMP# SIZE��050��050�

4 Mini6 Mini

7/3�” to 5/8”7/�6” to �5/3�”

With stainless steel screW

PACKED �0/BOX

PACKED �0/BOX

- 304 stainless steel band & housing- 302 stainless steel screw- 5/16” wide band- Packed 10 clamps in a box

SSC# CLAMP# SIZE��040��040�

4 Mini6 Mini

7/3�” to 5/8”7/�6” to �5/3�”

TORQUE WRENCH FOR HOSE CLAMPS

111062TORQUE WRENCHTightens to 60 ft. lbs.


HOSE CAPS AND GASKETSBrass hose caP With Gasket included

HC-305BRASS HOSE CAPFOR 3/4” THREADFor capping boiler drains,valves, hoses etc.Made of knurled brass.Includes G-194 gasket.

INCLUDES GASKET

hose caP Washers

G-194HOSE CAP WASHERNeoprene (Black Rubber)

G-194RRHOSE CAP WASHERRed Rubber

ACTUAL SIZE: � �/�6” ODX 9/�6” ID

MISCELLANEOUS HOSE PARTS

hose inlet filter screen

122569Prevents Sediment3/4”

siaMese hose connection

122568With Dual Shut-OffChrome Plated Zinc3/4”

rePair couPlinG - Male end

122565Plastic3/4”

rePair couPlinG - feMale end

122566Plastic3/4”

HOSE CAPS / HOSE PARTS / HOSE FITTINGS

hose Mender

122567Connects 2 Hose PiecesPlastic3/4”

BackfloW PreVenter (VacuuM Breaker)

122570Rough Brass3/4”

BRASS HOSE FITTINGS

feMale hose to feMale PiPe

1225733/4” FH X 3/4” FIP

Male hose to feMale PiPe

1225763/4” MH X 3/4” FIP

Male hose to Male hose

1225793/4” MH X 3/4” MH

feMale hose to Male PiPe

1225813/4” FH X 3/4” MIP(1/2” FIP TAPPED)

Male hose to Male PiPe

1225843/4” MH X 3/4” MIP(1/2” FIP TAPPED)

feMale hose to feMale hose - With sWiVel

1225873/4” FH X 3/4” FH

feMale hose to feMale PiPe - With sWiVel

1225903/4” FH X 3/4” FIP

Plastic hose caP With Gasket included

HC-306PLASTIC HOSE CAPFOR 3/4” THREADSame as above exceptmade of plastic.Includes G-194 gasket.INCLUDES GASKET

Brass hose caP With chain

HC-307ABRASS HOSE CAPWITH CHAINFOR 3/4” THREADDoes not include gasket.


HOSE BARBS / FLARE FITTINGS

BRASS HOSE BARBS

#29hose BarB to Male PiPe

(Barb refers to hose I.D.)

SSC# BARB x MPT SSC# BARB x MPT�3000��30003�30004�30005�30006�30007�30009�300�0�300��300�4�300�5�300�6

�/8” x �/8”3/�6” x �/8”3/�6” x �/4”�/4” x �/8”�/4” x �/4”�/4” x 3/8”5/�6” x �/8”5/�6” x �/4”5/�6” x 3/8”3/8” x �/8”3/8” x �/4”3/8” x 3/8”

�300�7�300��300��300�3�300�4�300�5�300�6�300�8�300�9�30030�3003�

3/8” x �/�”�/�” x �/4”�/�” x 3/8”�/�” x �/�”�/�” x 3/4”5/8” x 3/8”5/8” x 3/4”3/4” x �/�”3/4” x 3/4”�” x 3/4”�” x �”

45O FLARE TUBE FITTINGS - BRASS

#39PluG

SSC# TUBE SIZE SSC# TUBE SIZE�30�00�30�0��30�04

3/�6”�/4” 3/8”

�30�06�30�08

�/�” 5/8”

#40caP

SSC# TUBE SIZE SSC# TUBE SIZE�30��8�30��0�30��

3/�6”�/4”

5/�6”

�30��4�30��6�30��8

3/8”�/�”5/8”

#41sshort flare nut

SSC# TUBE SIZE SSC# TUBE SIZE�30�40�30�4��30�44�30�46

3/�6”�/4”

5/�6”3/8”

�30�48�30�50�30�5��30�54

�/�”5/8”3/4”7/8”

#41llonG flare nut

SSC# TUBE SIZE�30�56�30�57�30�58�30�59�30�60

�/8”3/�6”�/4”

5/�6”3/8”

#641fsshort forGed flare nut

SSC# TUBE SIZE SSC# TUBE SIZE�30�68�30�70�30�7�

3/�6”�/4”3/8”

�30�74�30�76�30�77

�/�”5/8”3/4”

short forGed flare reducinG nut#641fsr

SSC# TUBE SIZE�30�75�30�78�30�80�30�8�

�/4” x 3/�6”3/8” x �/4”�/�” x 3/8”5/8” x �/�”

BarB to BarB hose sPlicers

#29s

SSC# BARB SSC# BARB�30054�30056�30058

�30060�3006�

3/�6”�/4”5/�6”

3/8”�/�”



•

•

•



#42flare union

SSC# TUBE SIZE SSC# TUBE SIZE�30�00�30�0��30�04�30�06

3/�6”�/�”5/�6”3/8”

�30�08�30��0�30��30��4

�/�”5/8”3/4”7/8”

#42rreducinG flare union

SSC# TUBE SIZE SSC# TUBE SIZE�30��8�30��0�30��

�/4” x 3/�6”3/8” x �/4”�/�” x �/4”

�30��4�30��6�30��8

�/�” x 3/8”5/8” x 3/8”5/8” x �/�”

#44flare tee

SSC# TUBE SIZE SSC# TUBE SIZE�30�36�30�38�30�40�30�4�

�/8”3/�6”�/4”5/�6”

�30�44�30�46�30�48�30�50

3/8”�/�”5/8”3/4”

#44rreducinG flare tee

SSC# TUBE SIZE�30�58�30�60�30�6��30�64

�/4” x �/4” x 3/8”3/8” x 3/8” x �/4”�/�” x �/�” x 3/8”5/8” x 5/8” x �/�”

#45flare x MiP Branch tee

SSC# TUBE X MIP�30�68�30�7��30�74

3/�6” x �/8”3/8” x �/4”3/8” x 3/8”

FLARE FITTINGS

#46flare x fiP couPlinG

SSC# TUBE X FIP SSC# TUBE X FIP�30�78�30�80�30�8��30�84�30�86�30�88�30�90�30�9��30�94�30�96�30�98

3/�6” x �/8”�/4” x �/8”�/4” x �/4”�/4” x 3/8”�/4” x �/�”

5/�6” x �/8”5/�6” x �/4”3/8” x �/8”3/8” x �/4”3/8” x 3/8”3/8” x �/�”

�30300�3030��30304�30306�30308�303�0�303��303�4�303�6�303�8

3/8” x 3/4”�/�” x �/4”�/�” x 3/8”�/�” x �/�”�/�” x 3/4”5/8” x �/�”5/8” x 3/4”3/4” x �/�”3/4” x 3/4”7/8” x 3/4”

#48flare x MiP half union

SSC# TUBE X MIP SSC# TUBE X MIP�303�0�303��303��303�4�303�6�303�8�30330�3033��30334�30336�30338�30340

3/�6” x �/8”3/�6” x �/4”�/4” x �/8”�/4” x �/4”�/4” x 3/8”�/4” x �/�”

5/�6” x �/8”5/�6” x �/4”3/8” x �/8”3/8” x �/4”3/8” x 3/8”3/8” x �/�”

�3034��30344�30346�30348�30350�3035��30354�30356�30358�30360�3036�

3/8” x 3/4”�/�” x �/4”�/�” x 3/8”�/�” x �/�”�/�” x 3/4”5/8” x 3/8”5/8” x �/�”5/8” x 3/4”3/4” x �/�”3/4” x 3/4”7/8” x 3/4”

#49flare x MiP elBoW

SSC# TUBE X MIP SSC# TUBE X MIP�30368�30370�3037��30374�30376�30378�30380�3038��30384�30386

3/�6” x �/8”�/4” x �/8”�/4” x �/4”�/4” x 3/8”

5/�6” x �/8”5/�6” x �/4”3/8” x �/8”3/8” x �/4”3/8” x 3/8”3/8” x �/�”

�30388�30390�3039��30394�30396�30398�30400�3040��30404�30406

3/8” x 3/4”�/�” x �/4”�/�” x 3/8”�/�” x �/�”�/�” x 3/4”5/8” x 3/8”5/8” x �/�”5/8” x 3/4”3/4” x �/�”3/4” x 3/4”

#50flare x fiP elBoW

SSC# TUBE X FIP SSC# TUBE X FIP�30408�304�0�304��304�4�304�6

3/�6” x �/8”�/4” x �/4”�/4” x 3/8”3/8” x �/4”3/8” x 3/8”

�304�8�304�0�304��304�4�304�6

3/8” x �/�”�/�” x 3/8”�/�” x �/�”5/8” x �/�”5/8” x 3/4”

BLOCK FLARING TOOL

111012BLOCK FLARING TOOLProduces 45o FlaresSizes: 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” & 5/8”


FLARE FITTINGS / COMPRESSION FITTINGS

#55flare elBoW

SSC# TUBE SIZE SSC# TUBE SIZE�304�8�30430�3043�

3/�6”�/4”3/8”

�30434�30436

�/�” 5/8”

#70feMale flare sWiVel

SSC# TUBE SIZE SSC# TUBE SIZE�30438�30440�3044�

3/�6”�/4”3/8”

�30444�30446

�/�”5/8”

BRASS COMPRESSION FITTINGS

#60coMPression sleeVe

SSC# TUBE SIZE SSC# TUBE SIZE�3��00�3��0��3��04�3��06�3��08

�/8”3/�6”�/4”5/�6”3/8”

�3��0�3��3��4�3��6�3��8

7/�6”�/�”5/8”3/4”7/8”

#60Pdelrin coMPression ferule sleeVe

SSC# TUBE SIZE SSC# TUBE SIZE�3��0�3��

�/4” 3/8”

�3��4�3��6

�/�” 5/8”

#61coMPression nut


�/8”3/�6”�/4”5/�6”3/8”

�3��40�3��4��3��44�3��46�3��48

7/�6”�/�”5/8”3/4”7/8”

#61ccoMPression caP

SSC# TUBE SIZE�3��60�3��6��3��64

�/4”3/8”�/�”

#62coMPression union


�/8”3/�6”�/4”

5/�6”3/8”

�3��80�3��8��3��84�3��86�3��88

7/�6”�/�”5/8”3/4”7/8”

#62rreducinG coMPression union

SSC# TUBE SIZE SSC# TUBE SIZE�3��88�3��90�3��9�

�/4” x 3/�6”3/8” x �/4”�/�” x 3/8”

�3��94�3��96

5/8” x 3/8”5/8” x �/�”

#63PBrass coMPression insert

SSC# TUBE SIZE SSC# TUBE SIZE�3��98�3�300�3�30�

3/�6”�/4” 3/8”

�3�304�3�306

�/�”5/8”

#64coMPression tee

SSC# TUBE SIZE SSC# TUBE SIZE�3�308�3�309�3�3�0�3�3��3�3�4�3�3�6�3�3�8

3/�6”�/4” x �/4” x 3/�6”

�/4”5/�6”3/8”

3/8” x 3/8” x �/4”�/�”

�3�3�0�3�3��3�3�4�3�3�6�3�3�8�3�330

�/�” x �/�” x 3/8”5/8”

5/8” x 5/8” x 3/8”5/8” x 5/8” x �/�”

3/4”7/8”

#65coMPression elBoW

SSC# TUBE SIZE SSC# TUBE SIZE�3�338�3�340�3�34��3�344�3�346

3/�6”�/4”3/8”�/�”

�/�” x 3/8”

�3�348�3�350�3�35��3�354�3�356

5/8”5/8” x 3/8”5/8” x �/�”

3/4”7/8”


#66coMPression x fiP connector

SSC# TUBE X FIP SSC# TUBE X FIP�3�366�3�368�3�370�3�37��3�374�3�378�3�380�3�38��3�384�3�386

3/�6” x �/8”3/�6” x �/4”�/4” x �/8”�/4” x �/4”�/4” x 3/8”�/4” x �/�”5/�6” x �/8”5/�6” x �/4”3/8” x �/8”3/8” x �/4”

�3�388�3�390�3�39��3�394�3�396�3�400�3�40��3�404�3�406�3�4�0

3/8” x 3/8”3/8” x �/�”�/�” x �/4”�/�” x 3/8”�/�” x �/�”5/8” x �/�”5/8” x 3/4”3/4” x �/�”3/4” x 3/4”7/8” x 3/4”

COMPRESSION FITTINGS

#70coMPression x fiP elBoW

SSC# TUBE X FIP SSC# TUBE X FIP�3�548�3�550�3�55��3�554�3�558�3�560�3�56�

3/�6” x �/8”�/4” x �/8”�/4” x �/4”�/4” x 3/8”3/8” x �/8”3/8” x �/4”3/8” x 3/8”

�3�564�3�566�3�568�3�570�3�57��3�574

3/8” x �/�”�/�” x �/4”�/�” x 3/8”�/�” x �/�”5/8” x �/�”5/8” x 3/4”

#666coMPression x sWeat adaPter

SSC# TUBE X OD�3�4�6 3/8” x 5/8” (�/�” sweat)

#68coMPression x MiP connector

SSC# TUBE X MIP SSC# TUBE X MIP�3�430�3�43��3�433�3�434�3�436�3�438�3�440�3�44��3�444�3�446�3�448�3�450�3�45�

�/8” x �/8”3/�6” x �/8”3/�6” x �/4”�/4” x �/8”�/4” x �/4”�/4” x 3/8”�/4” x �/�”5/�6” x �/8”5/�6” x �/4”3/8” x �/8”3/8” x �/4”3/8” x 3/8”3/8” x �/�”

�3�454�3�456�3�458�3�460�3�46��3�464�3�466�3�468�3�470�3�47��3�474�3�476

3/8” x 3/4”�/�” x �/4”�/�” x 3/8”�/�” x �/�”�/�” x 3/4”5/8” x 3/8”5/8” x �/�”5/8” x 3/4”3/4” x �/�”3/4” x 3/4”7/8” x �/�”7/8” x 3/4”

#69coMPression x MiP elBoW

SSC# TUBE X MIP SSC# TUBE X MIP�3�490�3�49��3�493�3�494�3�496�3�498�3�500�3�50��3�504�3�506�3�508�3�5�0

�/8” x �/8”3/�6” x �/8”3/�6” x �/4”�/4” x �/8”�/4” x �/4”�/4” x 3/8”�/4” x �/�”5/�6” x �/8”5/�6” x �/4”3/8” x �/8”3/8” x 3/8”3/8” x �/�”

�3�5�4�3�5�6�3�5�8�3�5�0�3�5��3�5�4�3�5�6�3�5�8�3�530�3�53��3�534

3/8” x 3/4”�/�” x �/4”�/�” x 3/8”�/�” x �/�”�/�” x 3/4”5/8” x 3/8”5/8” x �/�”5/8” x 3/4”3/4” x �/�”3/4” x 3/4”7/8” x 3/4”

#72coMPression x MiP

Branch tee

SSC# TUBE X MIP�3�584�3�586�3�588�3�590�3�59�

3/�6” x 3/�6” x �/8”�/4” x �/4” x �/8”�/4” x �/4” x �/4”

3/8” x �/4”3/8” x 3/8”

BRASS COMPRESSION BALL VALVESSSC’s Brass Compression Ball Valves will fit copper tubing.

SSC# COPPER PIPE ��84��86��88

�/�” (5/8” OD)3/4” (7/8” OD)�” (� �/8” OD)600 WOG

SSC manufactures many Tankless Heater (Coil) Gaskets in various materials such as red rubber, neoprene rubber and long lasting EPDM rubber. See pages 43-49 for our complete list.


GLOVES / BULBS / TIE DOWNS / WIRE TIES

DISPOSABLE VINYL GLOVES

Our vinyl disposable gloves are an economical way to protect the hands from dirt, grease and other harmful chemicals while working in the field. Unlike rubber surgical gloves, vinyl gloves do not become slippery when covered with #2 oil. They can be thrown out after each job or used over and over.PACKED �00 GLOVES

PER BOX

GL-627DISPOSABLE VINYLGLOVESMedium Size

GL-628DISPOSABLE VINYL GLOVESLarge Size

DUST MASKSUse these economical dust masks for protection against soot and undesirable particles while cleaning boilers, burners, furnaces or while doing general service work.

108510DUST/PARTICLE MASK

PACKED 50/BOX

ROUGH SERVICE BULBS

LB-608A ROUGH SERVICE BULB75 Watt

LB-608BROUGH SERVICE BULB100 WattPACKED 6/PACKAGE

RUBBER TIE DOWN STRAPS

MADE OF EPDM RUBBER FOR MAXIMUM DURABILITY

SSC# LENGTHRS-6�9ARS-6�9BRS-6�9CRS-6�9DRS-6�9E

�0”�5”�0”3�”4�”

WIRE TIES AND MOUNTS

PACKED �00/BAG

SSC# DESCRIPTION LENGTH STRENGTHWT-6�5AWT-6�5BWT-6�5CWT-6�5DWT-6�5EWT-6�5FWT-6�5GWT-6�5HWT-6�5IWT-6�5JWT-6�5KWT-6�5LWT-6�5MWT-6�5NWT-6�5PWT-6�5R

WHITE WIRE TIEBLACK WIRE TIEWHITE WIRE TIEBLACK WIRE TIEWHITE WIRE TIEBLACK WIRE TIEWHITE WIRE TIEBLACK WIRE TIE

MNTG WIRE TIE-WH.MNTG WIRE TIE-BL.

WIRE TIE MOUNTWIRE TIE MOUNTWHITE WIRE TIEBLACK WIRE TIEWHITE WIRE TIEBLACK WIRE TIE

4”4”8”8”8”8”

��”��”

8 �/�”8 �/�”3/4”�”

�4”�4”

�8 �/4”�8 �/4”

�8 LBS.�8 LBS.�8 LBS.�8 LBS.50 LBS.50 LBS.50 LBS.50 LBS.50 LBS.50 LBS.

----

40 LBS.40 LBS.

��0 LBS.��0 LBS.

SHEET METAL SCREWS

- #8 thread- Self piercing- Hard steel--zinc plated- Hex head type with screwdriver slot

PACKED �00/BOX

SSC# SIZE PACKAGE TYPESH-635ASH-635BSH-635C

�/�”3/4”�”

�00/BOX�00/BOX�00/BOX

PLASTIC DISPOSABLE SHOE COVERSShoe covers minimize the chance of getting customers’ homes dirty by tracking in dirt on shoes.

108512PLASTIC DISPOSABLE SHOE COVERSBlue Color with Elastic100/Bag

NITRILE GLOVES - BLUE COLOR

SSC# SIZEGL-6�6GL-6�6A

LARGEMEDIUM

PACKED �00 GLOVES PER BOX


RUBBER GROMMETS

SSC# BORE DIA. PANEL HOLE/THICK. DIA./THICK.RG-634ARG-634BRG-634CRG-634DRG-634ERG-634FRG-634GRG-634HRG-634I

�/8”3/�6”3/�6”5/�6”�/�”3/8”5/8”3/4”7/8”

�/4” / �/�6”5/�6” / �/�6”5/�6” / 3/�6”7/�6” / �/�6”�/�” / �/�6”3/4” / 3/3�”7/8” / �/�6”

� �/�6” / �/�6”� �/4” / �/�6”

��/3�” / 3/�6”�/�” / �/4”

7/�6” / 5/�6”5/8” / 9/3�”5/8” / �/4”

7/8” / ��/3�”� �/8” / 5/�6”� 3/8” / 3/8”� 5/8” / 7/�6”

WINTERIZING EXPANSION PLUGS

Our Winterizing Plugs are made of a high quality rubber for maximum expandability which ensures a tight seal. These plugs are perfect for pressure testing the system for leaks as well as normal winterizing applications. They are made of a stainless steel slotted screw, washers, a rubber plug and a nylon wing nut for easy tightening.

SSC# DIAMETER FITS WP-000WP-00WP-0WP-�WP-�WP-3WP-4WP-5WP-6WP-7WP-8WP-9WP-9 �/�WP-9 3/4WP-�0WP-��WP-��WP-�3WP-�4WP-�5WP-�6

3/8” PIPE�/�” PIPE�/�” PIPE�/�” PIPE3/4” PIPE3/4” PIPE

3/4” FITTING & �” PIPE�” TUBE

�” FITTING� �/4” PIPE� �/�” PIPE

� �/4” FITTING & � �/�” PIPE� �/�” WALL FITTING� �/�” WALL FITTING

� �/�” FITTING�” PIPE

�” FITTING� �/�” PIPE

3” PIPE4” PIPE4” PIPE

.46”

.54”

.63”

.70”

.75”

.89”

.96”�.0�”�.�0”�.39”�.54”�.69”�.73”�.78”�.89”�.�3”�.4�”�.58”3.40”3.86”4.64”

BLOW THRU EXPANSION PLUGSThese plugs allows the service technician to release pressure from the pipe or fitting without removing the entire plug. Blow Thru Winterizing Plugs are made of a rubber plug, nylon wing nut and cap, stainless steel washers and a hollow brass blow thru slotted screw.

SSC# DIAMETER FITS WP-�BTWP-3BTWP-4BTWP-5BTWP-6BTWP-7BTWP-8BTWP-9BTWP-�0BTWP-��BTWP-��BTWP-�3BT

3/4” PIPE3/4” PIPE



� �/4” FITTING & � �/�” PIPE� �/�” FITTING

�” PIPE�” FITTING� �/�” PIPE

.75”

.89”

.96”�.0�”�.�0”�.39”�.54”�.69”�.89”�.�3”�.4�”�.58”

EXTENDED EXPANSION PLUGS

Extended Winterizing Plugs allow you to locate the plug deeper into the pipe or fitting thus ensuring a positive seal. They are made of a rubber plug, nylon wing nut, stainless steel washers, slotted screw and a 1.625” extension.

SSC# DIAMETER FITS WP-�XWP-3XWP-4XWP-5XWP-6XWP-7XWP-8XWP-9XWP-�0XWP-��XWP-��XWP-�3X

3/4” PIPE3/4” PIPE



� �/4” FITTING & � �/�” PIPE� �/�” FITTING

�” PIPE�” FITTING� �/�” PIPE

.75”

.89”

.96”�.0�”�.�0”�.39”�.54”�.69”�.89”�.�3”�.4�”�.58”

UNIVERSAL EXPANSION PLUGS AND UNIVERSAL BLOW THRU PLUGS

These plugs are made of the same material described above and fit the range of sizes listed below.

uniVersal PluGs uniVersal BloW thru SSC# FITS WP-�-5UPWP-5-7UPWP-7-�0UP

� to 55 to 7

7 to �0

SSC# FITSWP-�-5UPBTWP-5-7UPBTWP-7-�0UPBT

� to 55 to 7

7 to �0

GROMMETS / EXPANSION PLUGS


VIBRO-INSULATORSVibro-Insulators are rubber mountings which reduce or prevent the travel of vibrations to or from machinery. They control vibration and reduce noise on electric motors, pumps, compressors, blowers, generators, etc.

VI-633D VI-633E VI-633G

SSC# DESCRIPTION VI-633AVI-633BVI-633CVI-633DVI-633EVI-633FVI-633G

DOUBLE STUD-� 5/8” DIA.x� �/�” Hx5/�6-�8 THRDOUBLE STUD-� 5/8” DIA.x�”Hx5/�6-�8 THREAD

DOUBLE FEMALE-�” DIA.x�”Hx5/�6-�8-�4 THR.DOUBLE STUD-�”DIA.x�”Hx5/�6-�8 THREADDOUBLE STUD-�”DIA.x3/4”Hx�/4-�0 THREAD

SINGLE STUD-� 5/8” DIA.x� �/�”H x5/�6-�8 THR.SINGLE STUD-� 5/8” DIA.x�”Hx5/�6-�8 THREAD

DUCT / ALUMINUM / ELECTRICAL TAPE

DUCT TAPE

DT-317GRAY COLOREDDUCT TAPE2” x 60 yds.Each roll is shrink-wrappedfor protection.

DT-320BLACK COLOREDDUCT TAPE2” x 50 yds.Each roll isshrink-wrappedfor protection.

Gray Black

ALUMINUM FOIL TAPE

EACH ROLL ISSHRINK-WRAPPEDFOR PROTECTION

SSC# SIZEDT-3�8DT-3�8A

�” W x 50 yds.3” W x 60 yds.

ZOOM-SPOUT OILERUse the high quality turbine oil in SSC’s Zoom-Spout Oiler to oil bearing assemblies, electric motors, heaters, blowers, bushings, shafts, air-conditioners and home and shop appliances. The handy telescoping pole reaches into hard-to-get places.

ZM-322ZOOM-SPOUT OILER4 oz. Tubes WithZoom-Spout

STICKY SPRAYSticky Spray is a convenient way to hold O-rings and gaskets in place during installation. Spray the surface where you are installing the part, wait 1-2 minutes until it becomes tacky and apply the part. The part can easily be separated from the surface at a later date.

LUB-990STICKY SPRAY4 oz. Spray Bottle

DUCT TAPE - VARIOUS COLORS

SSC# COLORDT-3�0WDT-3�0BDT-3�0RDT-3�0GDT-3�0YDT-3�0D

WHITEBLUERED

GREENYELLOW

DARK GREEN�” X 50 YDS

ELECTRICAL TAPE

Our Electrical Tape comes in rolls of 3/4” Wide x 60’ Long. It has a temperature range of -10o to 176oF. It is UL approved, suitable for uses under 600V and is 7.0 mil thick. Available in the variety of colors listed below.

SSC# COLORET-3�3ET-3�3BET-3�3GET-3�3YET-3�3WET-3�3R

BLACKBLUE

GREENYELLOW

WHITERED

GASKET REMOVING SOLUTION

GR-957GASKET REMOVING SOLUTION18 oz. Spray Can

Make the removal of stubborn, baked-on gaskets easy. With this product’s foaming action you can remove gaskets without the work and without damage to the part. Sold in 18 oz. spray cans.

V-BELT, FAN BELT DRESSING

V-931V-BELT, FAN BELTDRESSING12 oz. Spray Can


PACKING / TEFLON TAPE / LUBRICANTS

TEFLON TAPEreGular teflon taPe

SSC# SIZETT-3��TT-3�4TT-3�5TT-3�6

3/4” X 5�0”�” X 5�0”

�/�” X �60”�/�” X 5�0”

yelloW Gas seal teflon taPe

Our Yellow Gas Seal Teflon Tape is UL approved, has 1.6” density and is .004” thick. This extra heavy duty tape is made especially for natural gas, propane, butane, water, oil and chemical lines.

.003” THICK

.004” THICK

SSC# SIZETT-3�4TT-3�5TT-3�6

�/�” X �60”�/�” X 5�0”3/4” X 5�0”

TEFLON PASTE (PIPE DOPE)

TT-319TEFLON PASTE(PIPE DOPE)1/2 Pint With Brush Top

PLUMBERS TEFLON GREASEThe U.S.D.A. has rated this lubricant as Food Grade Acceptable. Safely lubricate everything from O-rings and seals to valves and faucet components. This is a waterproof, non-melting, pure synthetic grease which will seal out water and lubricate under the most adverse conditions.

LUB-985TEFLON LUBRICANT/SEALANTU.S.D.A. H-1 Rated3 OZ. TUBE

PLUMBERS SILICONE GREASESSC’s Silicone Lube has similar uses as the teflon lube except that it is silicone based, making it a higher grade product than the teflon. It is also rated as Food Grade Acceptable by the U.S.D.A.

LUB-987SILICONE LUBRICANT/SEALANTU.S.D.A. H-1 Rated3 OZ. TUBE

SILICONE BASED SPRAY LUBRICANTA coating of this food-grade rated spray lubricant will protect everything from O-rings to nuts and bolts. The superior and safe lubrication properties of silicone are packaged here in a spray for a cleaner and easier application.

LUB-989SILICONE BASEDSPRAY LUBRICANT

4 OZ. SPRAYBOTTLE

MECHANICAL PACKING - GRAPHITE, TEFLON AND NON-STAINING GRAPHITESSC’s packing can be used to seal shafts, valve plugs and other general service applications.

PACKED IN � LB. SPOOLS& INDIVIDUALLY BOXED

SSC# TYPE SIZE FT/LB TEMP.PAC-�9APAC-�9BPAC-�9CPAC-�9DPAC-�9EPAC-�9FPAC-30APAC-30BPAC-30CPAC-30DPAC-30EPAC-30FPAC-3�APAC-3�BPAC-3�CPAC-3�DPAC-3�EPAC-3�F

N/S GRAPHITEN/S GRAPHITEN/S GRAPHITEN/S GRAPHITEN/S GRAPHITEN/S GRAPHITE

GRAPHITEGRAPHITEGRAPHITEGRAPHITEGRAPHITEGRAPHITE

TEFLONTEFLONTEFLONTEFLONTEFLONTEFLON

�/8”3/�6”�/4”5/�6”3/8”�/�”�/8”3/�6”�/4”5/�6”3/8”�/�”�/8”3/�6”�/4”5/�6”3/8”�/�”

�0�60�5

�4.��05.7�0�60�5

�4.��05.7

75.534.3�0.9�3.48.76

550o

550o

550o

550o

550o

550o

550o

550o

550o

550o

550o

550o

500o

500o

500o

500o

500o

500o

COMBINATION TEFLON / SILICONEGREASE

LUB-986COMBINATION TEFLON/SILICONE LUBRICANT/SEALANTU.S.D.A. H-1 Rated4 OZ. TUBE

COMBINATION TEFLON/ SILCONE LUBE

The LUB-986 lubricates and seals with a patented barrier of silicone and teflon. The U.S.D.A. has rated this lubricant as Food Grade Acceptable. It will not melt, dry out, form gummy deposits, separate, crack, evaporate, run or drip. It will safely lubricate O-rings, seals, bearings, valves, gears, faucet components and more.


COPPER FITTING BRUSHES

Wire handle

SSC# SIZE��0��04��06

�/�”3/4”�”

Wood handle

SSC# SIZE��4��6

�/�”3/4”�”

OPEN MESH GRIT CLOTH

110031OPEN MESH GRIT CLOTHFully Waterproof180 GritFor brass, copper oraluminum fittings.1 1/2” W x 10 yds.EACH ROLL IS

INDIVIDUALLY BOXED

SANDCLOTH

110037SANDCLOTH120 Grit1 1/2” W x 10 yds.EACH ROLL IS

INDIVIDUALLY BOXED

COPPER TUBING CUTTERSstandard

111030COPPER TUBE CUTTERDouble roller with groovefor cutting flared end andpull out reamer.1/8” to 1” cutting capacity.

Mini

111032MINI (MIDGET) COPPER TUBE CUTTERRequires only 1 1/16”swing clearance.1/8” to 7/8” cutting capacity.

TOOLS

2300O FLAME SHIELDSSC’s Flame Shield protects wood and metal during soldering or brazing. The material is a fire retardant high temperature cloth with an aluminum backing to hold shape. It is rated at 2300o. It can be easily cut to the size you need.

�/3�” THICK


6” x 6”��” x ��”�4” x �4”�0” x 36”

COPPER SWEDGE TOOL

111016COPPER SWEDGE TOOLFor use on 3/8” to 7/8” copper tubing.

WIRE PVC PIPE SAWThis PVC saw is perfect for tight spots as it only needs 1/4” clearance. It easily cuts through water-filled pipes.

ST-365PVC WIRE SAW

PIPE STRAP WRENCH

111014PIPE STRAP WRENCH7”

FIBERGLASS TAPE KIT -USED TO REPAIR PIPES & HOSES

Use our tape kit to repair broken pipe and hose. Just add water to the tape and wrap the broken area of pipe. Let it cure and the hole is patched. Rated at 300+ psi, -60o F to 800o F. It can be used on all types of pipe--plastics, poly, metal and copper.

SW-350FIBERGLASS TAPEPIPE & HOSEREPAIR KIT2” Wide x 60” Long

SEAL SETTING TOOL




BLOCK FLARING TOOL

111012BLOCK FLARING TOOLProduces 45o FlaresSizes: 3/16”, 1/4”, 5/16”,3/8”, 7/16”, 1/2” and 5/8”

3 IN 1 RADIATOR REPAIR TOOLThis handy tool extracts broken air valves, retaps the radiator and rethreads air valves.

1081033 IN 1 RADIATORREPAIR TOOL

TOOLS

RADIATOR (NIPPLE) SPUD WRENCH

111040RADIATOR SPUDWRENCH

WATER HEATER ELEMENT WRENCH

111064WATER HEATERELEMENT WRENCH3” Length

TORQUE WRENCHThis ratchet tool is used to tighten no-hub fittings and hose clamps. The wrench tightens clamps to 60 foot pounds of torque. The bar extends to help back off bolts.

111062TORQUE WRENCH




ST-362CLOSED IMPELLER WRENCHFits all closed impellers. Has large handle for excellent leverage.

BRASS CLEANING BRUSH

SSC-78BRBRASS CLEANING BRUSHHickory HandleToothbrush Size

GASKET SHEET SHEARS

GS-100SHHEAVY-DUTY SHEARS FORCUTTING GASKET MATERIAL

These shears make gasket cutting easy, especially when working with thick material.

4 WAY SILLCOCK KEY

1110204 WAY SILLCOCK KEYFits: 1/4”, 9/32”, 5/16” and 11/32”

GARBAGE DISPOSAL WRENCH

111022GARBAGE DISPOSAL WRENCHLoosens frozen and jammed disposals with a twist of the handle.

4 WAY P.O. PLUG WRENCH

1110044 WAY P.O. PLUGWRENCHPrevents rotation ofpop up plugs and basket strainers during installation.




ARMATURE HOLDING TOOLThis tool holds old style Century and Franklin armatures so the impeller can be removed. It fits into a 5/8” socket wrench.

ST-375ARMATURE HOLDING TOOL


SHOWER VALVE SOCKET WRENCH SET

111046SOCKET WRENCH SETSocket Sizes: 21/32”, 27/32”, 29/32”, 31/32”, 1 1/32”, 1 3/32”, 1 5/32”, 1 9/32”, 1 11/32” and 1 7/16”

These sockets can be used on shower valves, faucets, bibbs and basin cocks. The kit consists of 5 two-sized sockets.

TOOLS / WATER SUPPLY TUBES & STOPS

STAINLESS STEEL BRAIDED FLEXIBLELAVATORY SUPPLY TUBES

PLASTIC (POLYBUTYLENE) LAVATORY SUPPLY TUBES

SSC# SIZE�5005��50054

3/8” OD x ��” L3/8” OD x �0” L

DELRIN SLEEVEINCLUDED

PLASTIC (POLYBUTYLENE)TOILET SUPPLY TUBES

DELRIN SLEEVEINCLUDED

SSC# SIZE�5006��50064

3/8” OD x ��” L3/8” OD x �0” L

RUBBER CONE WASHER CONNECTION

SSC# CONNECTION LENGTH�5000��50006�500�0

3/8” COMP. x �/�” FIP3/8” COMP. x �/�” FIP3/8” COMP. x �/�” FIP

��”�0”30”

STAINLESS STEEL BRAIDED FLEXIBLETOILET SUPPLY TUBES

PLASTIC BALLCOCK NUT - RUBBER CONE WASHERS

SSC# CONNECTION LENGTH�500�0�500�4�500�8

3/8” COMP. x 7/8” BALLCOCK3/8” COMP. x 7/8” BALLCOCK3/8” COMP. x 7/8” BALLCOCK

9”��”�0”

O-RING PULLER TOOLSave those fingers! This inexpensive tool makes O-ring removal fast and easy.

O-10950O-RING PICK

4 IN 1 LOCKNUT WRENCH

1110024 IN 1 LOCKNUT WRENCHFits all sizes of closet spudsand duo locknuts.

BASIN WRENCHES - 11” AND 15”

SSC# SIZE��008��0�0

��” LENGTH�5” LENGTH

SEAT WRENCHESanGle

111042ANGLE SEAT WRENCH1 end tapered, 1 end hex to fit most faucet seats.

straiGht

111044STRAIGHT SEAT WRENCH1 end tapered, 1 end hexto fit most faucet seats.

INSIDE DUO BASKET STRAINER WRENCH

111024INSIDE DUO BASKETSTRAINER WRENCHAlso used on tub drains.4” Length

STANDARD HANDLE PULLER

111060STANDARD HANDLE PULLERWith Screw Action


STOPS / TOILET SPECIALTIES

SUPPLY STOPS

anGle coMPression x iPs

All stops are made of chrome plated brass and celcon stems.

SSC# CONNECTION3/8” COMP. x �/�” IPS3/8” COMP. x 3/8” IPS

�50�50�50�54

anGle coMPression x sWeat

150152ANGLE STOP3/8” Comp. x 1/2” Sweat

anGle coMPression x sWeat With 5” extension

150170ANGLE STOP WITH 5” EXTENSION3/8” Comp. x 1/2” Sweat

straiGht coMPression x iPs

SSC# CONNECTION�50�80�50�84

3/8” COMP. x �/�” IPS3/8” COMP. x 3/8” IPS

straiGht coMPression x sWeat

150182STRAIGHT STOP3/8” Comp. x 1/2” Sweat

straiGht coMPression x sWeat With 5” extension

150199STRAIGHT STOPWITH 5” EXTENSION3/8” Comp. x 1/2” Sweat

straiGht sWeat adaPter - chroMe Plated

150103CHROME PLATED3/8” OD x 1/2” Sweat

straiGht sWeat adaPter - rouGh Brass

150105ROUGH BRASS3/8” OD x 1/2” Sweat

coMPression nut - chroMe Plated

150129CHROME PLATEDFits 3/8” Tubing

PLASTIC ADJUSTABLE ANTI-SYPHON BALLCOCK

200503ADJUSTABLE FIT-ALL MODELFits 8” -12”Anti-SyphonLong Lasting Plastic

Ballcock couPlinG nut

150125PLASTIC7/8”

PLASTIC DOUGLAS TYPE FLUSH VALVE

200233PLASTIC DOUGLAS TYPEFLUSH VALVE ASSEMBLYIncludes Rubber Flapper

RUBBER FLAPPERS - KORKY TYPEBlack ruBBer

200230BLACK RUBBER FLAPPERKorky StyleIncludes Chain

Blue ruBBer - lonGer lastinG200231BLUE RUBBER FLAPPERKorky StyleIncludes ChainGreater chemical resistance than black rubber.

SEAT DISKS TO FIT AMERICAN STANDARD

200153SEAT DISK TO FITAMERICAN STANDARDTILT FLUSH VALVESScew-On Type

200155SEAT DISK TO FITAMERICAN STANDARDTILT FLUSH VALVESSnap-On Type

BLACK RUBBER


ACTUATORS TO FIT AMERICAN STANDARD#4

200160ACTUATOR TO FITA/S #4 FLUSHVALVEReplaces: 147086Includes rubber disk, chain and grommet.

#5200161ACTUATOR TO FITA/S #5 FLUSHVALVEReplaces: 173380Includes rubber disk,chain and grommet.

TANK LEVER

200322STANDARD TANK LEVERIncludes chrome plated zinc handle, zinc plated steel arm and plastic nut.

TOILET SPECIALTIES

CLOSE COUPLED BOLTS

200601CLOSE COUPLED BOLTSBrass Plated

PACKED PAIR/BAG

CLOSET FLANGE BOLTS

Brass

SSC’s toilet flange bolts are packed a pair per bag and have a steel nut and round steel washer.

SSC# SIZE�00665�00669

�/4” x � �/4”5/�6” x � �/4”

Brass Plated

PACKED PAIR/BAG

PACKED PAIR/BAG

SSC# SIZE�00655�00660

�/4” x � �/4”5/�6” x � �/4”

BOLT CAPSround oVal

200269ROUND CAPWhite Plastic

200267OVAL CAPWhite Plastic

adJustaBle (offset)200670ADJUSTABLE (OFFSET)TANK TO BOWL BOLTSThese connect differentmakes of tanks and bowls where holes are not centered.BrassPACKED PAIR/BAG

MISCELLANEOUS TOILET GASKETSBallcock shank Washer

140010Black Rubber

tank to BoWl Gasket

1400323 1/4” x 2 1/4”Rubber

sPud Washers

SSC# SIZE� �/4”� �/�”

�40040�4004�

rePlaceMent VacuuM Breaker to fit sloan

140045FOR V-500

Available in various thicknesses, SSC’s Gasket Sheets are perfect for emergency repairs and for replacing hard to find gaskets and washers. See pages 70-7�.


BATH / SHOWER SPECIALTIES

SHOWER HEADS

sPeakMan tyPe

190050SPEAKMAN TYPE SHOWER HEADChrome plated zinc die cast body.Has volume control.2”INDIVIDUALLY BOXED

chroMe Plated Plastic

190052CHROME PLATEDPLASTIC SHOWER HEAD2”

INDIVIDUALLY BOXED

Mini (Water saVer)

190054MINI SHOWER HEAD(WATER SAVER)Chrome Plated1”

The mini shower head compacts the spray thus saving water and giving you more water pressure (thrust) than most shower heads.

INDIVIDUALLY BOXED

shoWer arMschroMe Plated Brass

190030SHOWER ARMChrome Plated Brass1/2” IPS x 6” Long45O

chroMe Plated Plastic

190032SHOWER ARMChrome Plated Plastic1/2” IPS x 6” Long45OINDIVIDUALLY WRAPPED

INDIVIDUALLY WRAPPED

SHOWER ARM ESCUTCHEONS

190020SHOWER ARM ESCUTCHEONChrome Plated Plastic

190022SHOWER ARM ESCUTCHEONChrome Plated PlasticWith Set Screw

SHOWER ROD HOLDERS - JIFFY TYPE

SSC# MATERIAL�9006��9006�

CHROME PLATED PLASTICCHROME PLATED METAL

These are for installing shower bars without screws. Friction caps secure the holders to wall. They are adjustable.

TUB SPOUTSoVerriM

190105OVERRIM SPOUTChrome Plated ZincDie Cast1/2” FIP

With adJustaBle slide connector

- Chrome plated zamak (hard plastic)- 1 3/4” adjustable telescoping fit- Slide connector for fast installation- Fits 1/2” copper stub

INDIVIDUALLY BOXED

SSC# TYPE�90�0��90�03

REGULAR (SHOWN)WITH DIVERTER

TRIP LEVER FACE PLATE

190112TRIP LEVER FACEPLATE ASSEMBLYSquare handle with coil spring.Chrome plated die cast.Does not include screws.

FACE PLATE SCREW190115FACE PLATE SCREW1/4”-20 x 1 3/4” LPhillips HeadChrome Plated

BLANK FACE PLATE WITH 2 HOLES

190110BLANK FACE PLATEFOR TRIP LEVER ASSEMBLY2 HolesChrome Plated


BATH / SHOWER / SINK SPECIALTIES

TIP-TOE DRAIN ASSEMBLIES AND CARTRIDGES

Screw in the tip-toe drain to replace the trip lever assembly.This ends the difficult process of tearing down walls and reaching into tight places to fix or replace the old trip lever assembly. Use the blank face plate with two holes, shown on previous page, to fill the hole left by the old trip lever face plate.

chroMe Plated Brass

180510TIP-TOE DRAIN ASSEMBLYChrome plated brasswith C.P. plastic cap.1 1/2” x 3/8”

chroMe Plated zinc

INDIVIDUALLY BOXED

INDIVIDUALLY BOXED

180514TIP-TOE DRAINASSEMBLYChrome plated zincwith C.P. plastic cap.1 1/2” x 3/8”

rePlaceMent cartridGes / stoPPers

SSC# SIZE�805�8�805�9

5/�6”3/8”

DOMED STRAINER GRID FOR BATH DRAINS

180500DOMED STRAINER GRIDFOR BATH DRAINSStainless SteelPACKED IN A PLASTIC

BAG WITH SCREW

MISCELLANEOUS BATH GASKETS

140015BEVELED WASTE ANDOVERFLOW GASKETSponge Rubber

140021FLAT BATH SHOE WASHERRubber

SINK STRAINERSall stainless duo strainer

180200STANDARD DUO STRAINERStainless Steel4 1/2” Includes S.S. Basket Strainer

Plastic Body duo strainer

INDIVIDUALLY BOXED

INDIVIDUALLY BOXED

180204PLASTIC BODY DUO STRAINERABS Plastic Body with Stainless Steel Flange4 1/2”Includes S. S. Basket Strainer

quick connect strainer

INDIVIDUALLY BOXED

180208QUICK CONNECT STRAINERStainless Steel4 1/2”Includes S.S. Basket Strainer

deeP cuP strainer

INDIVIDUALLY BOXED

180212DEEP CUP DUOSTRAINERStainless Steel4 1/2”Includes S.S. Basket Strainer

Junior duo strainer

INDIVIDUALLY BOXED

180216JUNIOR DUO STRAINERStainless Steel2 1/2”Includes Basket

stainless steel Basket strainer

180201BASKET STRAINERStainless steel withchrome plated post.Has rubber sealand fits most drains.


LAV & SINK SPECIALTIESduo strainer Washer

140019DUO STRAINER WASHERRubber

SLIPNUTSchroMe Plated die cast

SSC# SIZE�3060��30604�30608

� �/4” x � �/4”� �/�” x � �/4”� �/�” x � �/�”

Plastic

SSC# SIZE� �/4” x � �/4”� �/�” x � �/�”

�306��306�8

SLIP JOINT WASHERS

ruBBer

PACKED �00/BAG

SSC# SIZE�40��0�40��40��4

� �/4” x � �/4”� �/�” x � �/4”� �/�” x � �/�”

taPered Plastic

PACKED �00/BAG

SSC# SIZE�403�0�403��403�4

� �/4” x � �/4”� �/�” x � �/4”� �/�” x � �/�”

TAILPIECE WASHERSnylon

140329NYLON TAILPIECE WASHER1 1/2”

ruBBer

W-189SINK TAILPIECE WASHERNeoprene (Black Rubber)1 1/2”

TUBULAR PIPE CONNECTOR

180010TUBULAR DRAIN PIPECONNECTORRubber1 1/2” x 1 1/2”For Under Sink

DISHWASHER / DISPOSAL CONNECTION WITH 4 CLAMPS

This rubber connector makes a quick seal between the drain and disposal or dishwasher.

180102DISHWASHER / DISPOSALCONNECTION WITH 4 HOSE CLAMPSBlack Rubber

AIR GAP FOR DISHWASHERS

180100AIR GAP FOR AUTOMATICDISHWASHERSPlastic with Chrome Top

LAVATORY POP-UP WASTE ASSEMBLIES

180402CHROME PLATED BRASS

180400ABS PLASTIC WITHSTAINLESS STEEL RIM

Hose Parts are listed on pages 83-84.

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900 �0�

LAV & SINK SPECIALTIES

RINSE GUN, HOSE AND HOLDERcoMPlete unit

170150RINSE GUN, HOSE AND HOLDERBlack

PACKED TOGETHERIN A PLASTIC BAG

sPray Gun only

170155SPRAY GUN ONLYBlack

BASIN FAUCETS

170101SELF-CLOSING BASIN COCKChrome Plated Brass

reGular

170103BASIN FAUCETChrome Plated Brass

self closinG

Basin cock couPlinG nut

130529BASIN COCKCOUPLING NUTBrass

HOSE BIBBS

CHROME PLATED BRASS

AERATOR WASHERS - BLACK RUBBER

�00/PACKAGE

SSC# SIZE�4000��40004

THICKTHIN

SSC# TYPE SIZE�600�0�600�0�60030�60035

3/4” HOSE END3/4” HOSE END

PLAIN ENDPLAIN END

�/�” MIP3/4” MIP�/�” MIP3/4” MIP

MACK BASIN WASHERS

SSC# SIZE�400�4�400�6

� �/�” BATH� �/4” BASIN

BEVELED FAUCET WASHERS

�00/PACKAGE

SSC# SIZE�40�0��40�03�40�05�40�07�40�09�40��40��40��5�40��7

000

�/4M�/4L3/83/8L3/8M�/��/�L

PLUMBER’S O-RING ASSORTMENT KITSSC’s Plumber’s O-ring Assortment Kit contains the O-rings the Plumber is most often called upon to replace. This handy assortment kit contains 150 total O-rings which fit the majority of residential requirements. Every service truck and shop should have one.

O-10960O-RING ASSORTMENT KIT12 Different Sizes150 Total O-rings

SSC# SIZE QTY.O-�00�0O-�00��O-�0��0O-�0��O-�0��O-�0��3O-�0��4O-�0��5O-�0��6O-�0��0O-�0��O-�0��

�/4” ID x 3/8” OD x �/�6” TH5/�6” ID x 7/�6” OD x �/�6” TH3/8” ID x 9/�6” OD x 3/3�” TH7/�6” ID x 5/8” OD x 3/3�” TH�/�” ID x ��/�6” OD x 3/3�” TH9/�6” ID x 3/4” OD x 3/3�” TH5/8” ID x �3/�6” OD x 3/3�” TH��/�6” ID x 7/8” OD x 3/3�” TH3/4” ID x �5/�6” OD x 3/3�” TH3/4” ID x �” OD x �/8” TH�3/�6” ID x � �/�6” OD x �/8” TH7/8” ID x � �/8” OD x �/8” TH

�0�030�0�0�0�0�0�0�0�0�0

O-RING PULLERSave those fingers! This inexpensive tool makes O-ring removal fast and easy.

O-10950O-RING PICK

Order Online! www.strainerscreen.com Call 1-800-863-5800 - Fax 1-800-863-5900�0�

LAV & SINK SPECIALTIES

O-RING LIST

SSC’s O-rings are made of durable Buna-N Rubber which will give you a superior performance in either oil or water.

SSC# SIZEO-�0006O-�0007O-�0008O-�0009O-�00�0O-�00��O-�00��O-�00�3O-�00�4O-�00�5O-�00�6O-�00�7O-�00�8O-�00�9O-�00�0O-�00��O-�00��O-�00�3O-�00�4O-�00�5O-�00�6O-�00�7O-�00�8O-�00�9O-�0030O-�003�O-�003�O-�0033O-�0034O-�0035O-�0036O-�0�08O-�0�09O-�0��0O-�0��O-�0��O-�0��3O-�0��4O-�0��5O-�0��6O-�0��7O-�0��8O-�0��9O-�0��0O-�0��O-�0��O-�0��3O-�0��4O-�0��5O-�0��6O-�0��7O-�0��8O-�0��9O-�0�30

�/8” ID x �/4” OD x �/�6” TH5/3�” ID x 9/3�” OD x �/�6” TH3/�6” ID x 5/�6” OD x �/�6” TH

7/3�” ID x ��/3�” OD x �/�6” TH�/4” ID x 3/8” OD x �/�6” TH

5/�6” ID x 7/�6” OD x �/�6” TH3/8” ID x �/�” OD x �/�6” TH

7/�6” ID x 9/�6” OD x �/�6” TH�/�” ID x 5/8” OD x �/�6” TH

9/�6” ID x ��/�6” OD x �/�6” TH5/8” ID x 3/4” OD x �/�6” TH

�3/�6” ID x ��/�6” OD x �/�6” TH3/4” ID x 7/8” OD x �/�6” TH

�3/�6” ID x �5/�6” OD x �/�6” TH7/8” ID x �” OD x �/�6” TH

�5/�6” ID x � �/�6” OD x �/�6” TH�” ID x � �/8” OD x �/�6” TH

� �/�6” ID x � 3/�6” OD x �/�6” TH� �/8” ID x � �/4” OD x �/�6” TH

� 3/�6” ID x � 5/�6” OD x �/�6” TH� �/4” ID x � 3/8” OD x �/�6” TH

� 5/�6” ID x � 7/�6” OD x �/�6” TH� 3/8” ID x � �/�” OD x �/�6” TH� �/�” ID x � 5/8” OD x �/�6” TH� 5/8” ID x � 3/4” OD x �/�6” TH� 3/4” ID x � 7/8” OD x �/�6” TH

� 7/8” ID x �” OD x �/�6” TH�” ID x � �/8” OD x �/�6” TH

� �/8” ID x � �/4” OD x �/�6” TH� �/4” ID x � 3/8” OD x �/�6” TH� 3/8” ID x � �/�” OD x �/�6” TH

�/4” ID x 7/�6” OD x 3/3�” TH5/�6” ID x �/�” OD x 3/3�” TH3/8” ID x 9/�6” OD x 3/3�” TH7/�6” ID x 5/8” OD x 3/3�” TH

�/�” ID x ��/�6” OD x 3/3�” TH9/�6” ID x 3/4” OD x 3/3�” TH

5/8” ID x �3/�6” OD x 3/3�” TH��/�6” ID x 7/8” OD x 3/3�” TH3/4” ID x �5/�6” OD x 3/3�” TH

�3/�6” ID x �” OD x 3/3�” TH7/8” ID x � �/�6” OD x 3/3�” TH

�5/�6” ID x � �/8” OD x 3/3�” TH�” ID x � 3/�6” OD x 3/3�” TH

� �/�6” ID x � �/4” OD x 3/3�” TH� �/8” ID x � 5/�6” OD x 3/3�” TH� 3/�6” ID x � 3/8” OD x 3/3�” TH� �/4” ID x � 7/�6” OD x 3/3�” TH� 5/�6” ID x � �/�” OD x 3/3�” TH� 3/8” ID x � 9/�6” OD x 3/3�” TH� 7/�6” ID x � 5/8” OD x 3/3�” TH

� �/�” ID x � ��/�6” OD x 3/3�” TH� 9/�6” ID x � 3/4” OD x 3/3�” TH

� 5/8” ID x � �3/�6” OD x 3/3�” TH

SSC# SIZEO-�0�3�O-�0�3�O-�0�33O-�0�34O-�0�35O-�0�36O-�0�0�O-�0�03O-�0�04O-�0�05O-�0�06O-�0�07O-�0�08O-�0�09O-�0��0O-�0��O-�0��O-�0��3O-�0��4O-�0��5O-�0��6O-�0��7O-�0��8O-�0��9O-�0��0O-�0��O-�0��O-�0��3O-�03�7O-�03�8O-�03�9

� ��/�6” ID x � 7/8” OD x 3/3�” TH� 3/4” ID x � �5/�6” OD x 3/3�” TH

� �3/�6” ID x �” OD x 3/3�” TH� 7/8” ID x � �/�6” OD x 3/3�” TH

� �5/�6” ID x � �/8” OD x 3/3�” TH�” ID x � 3/�6” OD x 3/3�” TH

�/4” ID x �/�” OD x �/8” TH5/�6” ID x 9/�6” OD x �/8” TH

3/8” ID x 5/8” OD x �/8” TH7/�6” ID x ��/�6” OD x �/8” TH

�/�” ID x 3/4” OD x �/8” TH9/�6” ID x �3/�6” OD x �/8” TH

5/8” ID x 7/8” OD x �/8” TH��/�6” ID x �5/�6” OD x �/8” TH

3/4” ID x �” OD x �/8” TH�3/�6” ID x � �/�6” OD x �/8” TH

7/8” ID x � �/8” OD x �/8” TH�5/�6” ID x � 3/�6” OD x �/8” TH

�” ID x � �/4” OD x �/8” TH� �/�6” ID x � 5/�6” OD x �/8” TH

� �/8” ID x � 3/8” OD x �/8” TH� 3/�6” ID x � 7/�6” OD x �/8” TH

� �/4” ID x � �/�” OD x �/8” TH� 5/�6” ID x � 9/�6” OD x �/8” TH

� 3/8” ID x � 5/8” OD x �/8” TH� 7/�6” ID x � ��/�6” OD x �/8” TH

� �/�” ID x � 3/4” OD x �/8” TH� 5/8” ID x � 7/8” OD x �/8” TH

� 3/4” ID x � �/8” OD x 3/�6” TH� 7/8” ID x � �/4” OD x 3/�6” TH

�” ID x � 3/8” OD x 3/�6” TH


MFG.# SSC# PG.# MFG.# SSC# PG.#MFG.# SSC# PG.#AEROMOTOR�6360 �08�� 60�7687 �08�� 60�7749 �08��3 60

AMERICAN STANDARD�47086 �00�60 97�73380 �00�6� 97

ARMSTRONG PUMP�03408-000 B-55 36�0444�-000 B-5� 36�060�8-000 BP-37� 3� �06049-000 B-53 36�06050-000 B-50 36�06�58-000 B-5� 35�0659�-000 B-60 36804034-000 B-�98 34804034-000 B-�6 34805�76-000 A-�88 35805�0�-000 B-�8 34805�09-000 B-�05 358060�6-00� SSC-779 �8806�68-00� SSC-780 �88�0��0-003 SSC-78� �88�0��0-006 SSC-78� �88�0��0-008 SSC-783 �88��96�-�� BP-37�A 3�8�600�-000 BP-387A 3�8�6��7-000 B-�88 348�6558-000 BP-379 3�8�6653-000 B-54 348�6706-00� BP-38� 3�974507-�00 BP-37�K 3�

ARMSTRONG TRAPA��348-� A-�88A 56A��958-� A-�88B 56

BELL & GOSSETT��8036 BP-390 3��8054 B-57 35��8065 B-�05 35��8��9 B-�8 34��8�8� BP-383 �9��8��3 BP-399 �9��8��7 BP-397 �9��835� B-56 35��8368 B-54 34��8373 B-�98 34��8373 B-�6 34��8378 B-�88 34��8473 SSC-78� �8��8476 SSC-784 �8��86�9 BP-379 3��8680 BP-380 3��868� BP-38� 3��8697 BP-387A 3��8705 SSC-779 �8��8709 SSC-78� �8��87�3 SSC-780 �8

OEM CROSS REFERENCE CHART

�800�7 MS-356 3��864�0 SSC-783 �8�86499 BP-384 3��8686� BP-386 3��86877 BP-386A 3��89035 BP-37� 3��89�3� BP-37�A 3�P44�00 BP-37�N 3�P48690 B-�00 35P574�0 B-5� 35P57700 B-60 36P5770� B-�00A 35P57770 B-�99 35P649�0 BP-39� 33P80765 B-�99A 35PO�800 BP-394 3�PO�830 B-55 36PO4080 B-5� 36PO488� BP-385 3�PO4890 B-53 36PO4940 BP-37�K 3�PO5800 B-50 36

BECKETT�454 BC-66� �736�6 B-�5 �73�5�9 T-�60 �73�5�0 T-�6� �75�304 T-�6� �7

BERKELYSO-4757 �08�44 6�SO-5��6 �08�45 6�

DANFOSS07�N�39� SSC-��7 8633B0090 D-�9 8633B�463 D-�8 9

DUNHAM BUSHC5698 D-�5�A 57D�63 D-�5�D 57D535� D-�5� 57D544� D-�5�C 57D5449 D-�5�B 57

F.E. MEYERS5059A-33� �0830� 6�

FAIRBANKS40039765 �08�6� 6�40049766 �08�6� 6�4007��7 �08�63 6�

FLINT & WALLING�03969 �08�5� 6��5994 �08�53 6��778� �08�54 6��30968 �08�5� 6��3�743 �08�55 6�

FULFLO3�300 F-95 �03�0�4 F-97 �03�0�5 F-96 �0

GENERAL�A-705 G-�00 �0GK-� G-�9A �0

GOULDS5K�07 �08��7 6�5K�08 �08�78 6�5K�09 �08�79 6�5K��0 �08�80 6�5K�� 08�76 6�5K�� 08�8� 6�5K�44 �08�8� 6�5K�45 �08�83 6�5K�46 �08�84 6�5K�5� �08�85 6�5K�6� �08�86 6�5K�56 �08�87 6�5K� �08�88 6�5K5 �08�75 6�

HOFFMAN600345 H-�89C 5660��70 H-�89B 5660��73 H-�89D 57604030 H-�89A 56DG0060 H-�89E 57DG009� H-�89F 57

HONEYWELL��37�A W-590 56��37�B W-59� 56��37�L W-59� 56��37�M W-593 56��37�N W-593 56��555E W-597B 56��373�AA W-595 56��3869A W-590 56��3870A W-59� 56��387�E W-597A 56��387�A W-59� 56��4�99AA W-596 56�30367 CC-60� 9�38�34C W-597 56�38�34E W-597 5636486 U-600 9R8�8� H-598 9R8�84 H-598A 9

Please visit our Website to see cross reference charts (to SSC#) for Crown Engineering, Westwood Products, Mitco Manufacturing and Wal-Rich Corp. www.strainerscreen.com


MFG.# SSC# PG.# MFG.# SSC# PG.#MFG.# SSC# PG.#


HYDROVALVEGB-��4 B-50 36GB-��9 B-5� 35GB-�30 B-5� 36GB-�3� B-53 36GB-�3� B-54 34GB-�33 B-55 36GB-�37 B-56 35GB-�38 B-57 35GB-�5� B-58 36GB-�53 B-59 35GB-�54 B-60 36GB-�57 B-6� 36GB-�6� B-6� 36GB-�7� B-�8 34GE-��7 E-�6 4�GF-�00 F-95 �0GF-��0 T-4� 40GF-��3 G-90 �0GF-��4 G-9� �0GF-��5 F-98 �0GF-��6 F-97 �0GF-��9 T-36 4�GF-�� G-9� �0GF-�36 M-37 5�GM-�� W-�79A 9GM-�� W-�79B 9GM-��3 W-�4 4�GS-��8 S-70 �GS-��9 S-75 �GS-�30 S-7� 5GS-�3� S-78 4GS-�33 S-73 5GS-�34 S-80 5GS-�35 S-7� 4GS-�37 S-76 4GS-�38 S-65 5GS-�39 S-74 �GS-�57 S-�83 4�GS-�58 S-�83A 4�GS-�59 S-�83B 4�GS-�6� S-�83C 4�GS-�65 S-66 �GS-�66 S-79 3GS-�67 S-67A �GT-�48 T-4� 39GT-�49 T-43 39GT-�7� T-44 40GT-��8 T-45 39GT-�35 T-47 40GT-�6� T-48 40 GT-�63 T-49 40GW-�00 W-84 5GW-�03 W-83 5GW-�04 W-88 6GW-�07 W-87 5GW-�09 W-85 5GW-��0 W-8� 6GW-�� W-8� 6GW-��3 W-�0� 5GW-��4 W-86 5GW-��0 W-88 6

K-��50 BP-400K 3�K-��50Y BP-400 3�K-��5� BP-37�K 3�K-��5� BP-389 3�K-��5�N BP-389N 3�K-��6� TP-430 37K-��63 TP-434 37K-��74 BP-397 �9K-��8� BP-383 �9K-��49 BP-379 3�K-��76 BP-390 3�K-��77 B-63 3�K-�3�9 T-�0�A 4�K-�339 BP-38� 3�K-�360 T-�0�B 4�K-�36� T-�0�C 4�K-�36� T-�0�D 4�K-�363 T-�0�E 4�K-�378 PM-369A 3K-�379 PM-369B 3K-�380 PM-369C 3K-�44� A-�� 35K-�447 TP-4�0 37K-�448 TP-4�� 37K-�449 TP-4�3 38K-�450 TP-4�� 37K-�649 F-99 �0K-�646 SSC-�� K-3508 M-39 5�K-3509 M-40 5�PS-�67 SP-335 3PS-�68 SP-336 3RD-737 SC-737 30RD-739 SC-739 30RM-45� BP-394 �8RM-506 BP-385 3�RM-5�0 TP-437 4�RM-5�9 BP-37�K 3�RM-53� TP-436 4�RM-535C BP-385A 3�RM-539 BP-399 �9RM-549 BP-38� �9RM-549-N BP-38�MY �9RM-79� SSC-783 �8RM-794 SSC-784 �8RM-798 SSC-78� �8RM-799 SSC-78� �8RM-809 U-600 9RM-8�� H-599 9RM-8�8 BP-388 3�RM-83�-A TP-433 37RM-836 TP-4�9 38RM-838 TP-4�7 36RM-858 SSC-780 �8RM-859 BP-37�N 3�RM-860 TP-4�0 36RM-86� TP-4�� 37RM-86� TP-43� 37RM-863 TP-43� 37RM-864 TP-4�6 4�, 37RM-869 TP-4�� 37RM-87� TP-4�4 37

RM-87� TP-4�8 37RM-876 SSC-779 �8RM-880 BP-380 3�RM-880S BP-379 3�RM-880W BP-38� 3�RM-88�-B BP-37�C 3�RM-883 TP-4�5 36RM-885A BP-398A 30RM-886A BP-398B 30RM-887PA BP-37�A 3�RM-887PB BP-37�A 3�RM-889 SSC-300 50RM-89� BP-387 3�RS-�0�5 SP-338A 3RS-�0�6 SP-338B 3RS-�0�7 SP-338C 3RS-�0�8 SP-338D 3RS-�035 SP-366 4RS-900 SP-33� 4RS-90� S-67 4RS-9�� SP-33�W 4RS-9�� SP-354 4RS-9�4 SP-344 3RS-9�7 SSC-��0 �RS-9�9 SP-35� 4RS-9�3 SP-346 3RS-939 SSC-�09 �RS-940 SP-353 3RS-944 SP-35� 3RS-945 SSC-��5 4RS-950 SSC-�0� 4RS-955 SSC-��6 �RS-977 SP-355 4RS-978 SP-355A 4RS-986 SP-337 3, 6RW-60� WP-�47 6RW-6�� WP-��0 6RW-6�5 WP-�48 6RW-6�6 WP-�49 6RW-6�9 WP-�50 6RW-63� WP-�07 6RW-640 WP-�08 6RW-645 WP-��5 7RW-646 WP-��6 7RW-649 WP-��4 6RW-650 WP-�� 7RW-654 WP-��8 6RW-655 WP-��9 7RW-656 WP-��7 7RW-66� WP-�3� 8RW-66� WP-�33 7RW-664 WP-�09 7RW-665 WP-��0 7RW-666 WP-�� 7RW-667 WP-�06 7RW-668 WP-�� 6RW-669 WP-��4 7RW-670 WP-��5 7RW-67� WP-��6 7RW-674 WP-��9 6RW-675 SSC-790 �8W-�000-G W-�5 4�




ICP��49�03 I-8�0 �6

JET AERATOR4600�0� �08330 6�660�90 �0833� 6�

LAU38-�086-0� BL-80� �638-�087-0� BL-803 �638-�095-0� BL-843 �538-�096-0� BL-84� �538-��04-0� BL-80� �638-��05-0� BL-84� �538-��06-0� BL-83� �538-��07-0� BL-833 �538-�404-0� BL-8�5 �638-�44�-0� BL-8�6 �638-�44�-0� BL-8�7 �6�8-�443-0� BL-8�� 638-�443-03 BL-8�� 638-�694-0� BL-8�3 �6

LENNOX�60 L-�600 �5

MASTERCRAFT4464 VB-63�A �74465 VB-63�B �7

MCDONNELL & MILLER30�500 M-9 5�30�600 M-40 5�304�00 M-35 5�3095�0 SSC-300 503�0800 M-�0 5�3��00 M-�� 5�3��00 M-5 5�3��700 M-37 5�3��800 M-�� 5�3��900 M-�4 5�3�3�00 M-38 503�3650 MP-�94 503�8300 MP-�97 503�8700 MP-�96 503�8800 M-33 5�3�0500 M-34 5�3�3300 M-7 5�3�4435 M-�54 503�5300 M-8 5�3�5400 M-39A 5�3�5500 M-39 5�3�8900 M-4 5�333800 M-�46 5�335400 M-6 5�340700 MP-�9� 50347�00 MP-�90 503543�0 M-3 5�354370 M-� 5�354380 M-� 5�3544�0 M-�3 5�

35508� M-�7 5�

MILLER30��8�000 M-�49 �830��05000 M-�48 �830000�0000 M-�47 �830��950000 M-�86 �8669064 MFP-404 �9689505 M-�86A �8730534 M-�87 �8

MONITOR6�� M-�9�G �56��3 M-�9�A �46��4 M-�9�I �56��5 M-�9�C �46��7 M-�9�H �5 6��9 M-�9�F �56��0 M-�9�L �56��4 M-�9�E �46��5 M-�9�D �46��6 M-�9�J �56�30 M-�9�K �56�89 M-�9�B �463�3 M-�9�Q �563�7 M -�9�U �56344 M-�9�N �56350 M-�9�P �56354 M-�9�R �56357 M-�9�T �56363 M-�9�M �5

PEABODY BARNES�7344 �08307 6�

PETRO��550� P-�33 ��6�60 P-�35 ��6�6� P-�34 ��

RAPID DAYTONW-�6675 �083�6 63

RIELLO30057�9 SSC-��6G 830070�9 R-68 83007�56 R-69 83007�6� R-64 8

SUNDSTRAND547708� S-�83C 4�547805� S-�83 4�54790�� S-�83A 4�

SUNTEC�4800 SP-35� 4�58�5 S-67 4�0090� S-78 4�0096� S-7� 5�0�5�� S-73 5

�0�86� SP-33�W 4��044� S-7� 4��333� S-76 5�3�066 SSC-��5 4�3�6�� SSC-�0� 4�35�7� SP-366 4�357�� SSC-��7 4�60046 S-74 �37�5�0� SSC-�09 �37�5�7� SSC-��0 �37�574� SSC-�� 37�5744 SSC-�� 37�5746 SSC-��4 �37�9�4� SP-339 33754734 SP-344 33759�3� SP-337 33759�5� SP-346 33773�5� S-79 33773�0� S-66 �377905� S-75 �377907� SP-35� 33779756 SP-338A 33779760 SP-338B 33779764 SP-338C 33779786 SP-338D 3377980� S-70 �

TACO007-003RP T-48 40008-005RP T-49 40��0-009 TP-4�5 36��0-0�3RP T-45 39��0-��RP TP-4�9 38��0-�43RP TP-4�3 38��0-��7RP T-43 39��0-�63RP TP-4�0 37��0-�65RP TP-4�� 37��0-�73RP TP-4�� 37��0-�75RP TP-4�0 36��0-339RP T-4� 39��0-339RP T-�87 39��0-364RP T-44 40��0-364RP T-4� 40��0-009RP T-46 40�600-�69RP T-�5� 40�600-�69RP T-�5�A 40�600-�70RP TP-4�5 37

THRUSHTJ-00�-00 T-�0�C 4�TJ-00�-00A T-�0�E 4�TJ-0�0-000 T-�0�B 4�TJ-0��-000A T-�0�D 4�TJ-043-000 T-�0�F 4�TJ-046-00A T-�0�A 4�

VAK PAK9��8 �083�0 63




Please Note: Many of the parts that SSC offers are not listed in this cross reference. This is because there is no OEM number for these parts. Please view the main sections of this catalog for a description of these parts.

VIKINGG-43� V-�04A �3H-43� V-�59A �3

WATSON MCDANIELA�433 M-�95A 56

WEBSTER�9867 WP-�33 7�987� W-84 5��04 W-88 6�5086 WP-�30 74�466 WP-��9 64�639 WP-�38 744�6� WP-�� 647776 WP-�33 747986 WP-��8 64806� WP-��4 74806� WP-��5 749�30 WP-�� 749489 WP-��7 749490 WP-�34 7�9859-5 WP-�37 7�508�-3 WP-�43 7�4��-5 WP-��4 6�5��-� WP-��0 6�964�-�00 WP-��9 7�964�-87 WP-�06 7�964�-� WP-��7 7�9650-�4 WP-�4� 73�67�-� WP-�� 639435-� WP-�08 64�56�-� WP-�07 6479�3-� WP-��6 748�50-� WP-�4� 749�05-3 WP-�3� 849�05-7 WP-�3� 849488-� WP-�� 749488-� WP-��0 749488-3 WP-�09 749488-3 WP-�44 749488-4 WP-�39 749488-5 WP-�40 749489-� WP-��8 749490-� WP-��5 749490-3 WP-��6 749579-� WP-�35 849579-4 WP-�45 8A30Q4-3 WP-�47 6P�8Q� W-8� 6P�8Q�� W-85 5P�8Q�8 W-86 5P�8Q3 W-8� 6P�8T� W-�0� 5P�8T3 W-87 5

WINKLER�70468 W-�79A 9

YORK0�8�07�09-000 Y-8�9 �6

Please visit our Website to see cross reference charts (to SSC#) for Crown Engineering, Westwood Products, Mitco Manufacturing and Wal-Rich Corp. www.strainerscreen.com


PRODUCT INDEXAce Type Gasket 60Actuators 97Adhesive-O-ring Cord 57Aerator Washers �0�Aeromotor Type Gaskets 60Air Bleeder Valves 78Air Gap �00Allied Pump Type Gaskets 60Allis Chalmers Type Gaskets 60Aluminum Foil Tape �4, 9�Aluminum Pilot Tubing �6American Standard Type Actuators 97American Standard Type Seat Disks 96Anti-Vibration Tube Clamps �7Armature Holding Tool 30, 94Armstrong Trap Type Gaskets 56Armstrong Type Parts �8-36Backflow Preventer 81, 84Bags-Vacuum �7Ball Bearings 30Ball Valves-Brass 79Ball Valves-PVC 79Ballcock-Adjustable 96Basin Faucets �0�Basin Washers �0�Basin Wrench 95Bath Gaskets 99Bath Specialties 98-99Bearing Puller 30, 38, 94Bearings-Ball 30Bearings-Blower �6Beckett Type Parts �7Bell & Gossett Type Couplers �8Bell & Gossett Type Flanges 33Bell & Gossett Type Gaskets 34-36Bell & Gossett Type Parts �9-36Bell & Gossett Type Seal Kits 3�Belt Dressing �5, 9�Belts-V-Belts �5Berkely Type Gaskets 60-6�Bleeder Wrench-Fuel Unit 3, 6Block Flaring Tool 86, 94Blower Bearings �6Blower Shafts �5Boiler Drains 80Boiler Handhole and Manhole Gaskets 58Bolt Caps-Toilet 97Bolt Kits-Circulator 33, 38Bolt Packs 60Brad Type Gasket �6Braided Stainless Steel Supply Tubes 95Brass Brush 94Brass Cleanout Plugs 78Brass Compression Fittings 87-88Brass Flare Fittings 85-87Brass Swing Check Valves 8�Brush-Brass 94Bulbs-Rough Service 89By-Pass Plugs 3Cad Cell Eyes 9, �3Candles-Smoke �3Capacitors-Motor 30Carlin Type Gaskets �7Check Valve-Sewage Ejector 8�Check Valves-Brass Swing 8�Check Valves-PVC 8�Circulator Bolt Kits 33, 38Circulator Couplings �8, 36, 4�Circulator Flange Tool 33Circulator Flanges 33, 38Clamps-Hose 83Clamps-Pipe 83Cleaver Brooks Type Parts ��-�3Close Coupled Bolts 97CO� Charges �9

CO� Guns �9Coil Gaskets-Tankless 43-49Coin / Key Air Valve 54Combu Type Gasket 9Companion Flange Gaskets 59-60Compound Gauges 74Compression Couplings-Galvanized 8�Compression Couplings-PVC 8�Compression Fittings 87-88Copper Fitting Brushes 93Copper Oil Lines �9Copper Tubing Cutters 93Cord-O-ring 57Couplings-Circulator �8, 36, 4�Couplings-No-Hub 8�Couplings-Oil Burner ��Couplings-Pipe 8�Couplings-Woods �9Cross Reference Chart �03-�06Cuno Type Gasket ��Danfoss Type Parts 8-9Diaphragm Gauges 77Dirt Pocket Cap 50Dishwasher / Disposal Connection �00Dollar Plugs 8�Douglas Type Flush Valve 96Drain Cocks 78Duct Straps-Flexible �6Duct Tape 9�Dunham Bush Type Gaskets 57Duo Basket Strainer Wrench 95Duplex Tank Bushings �0Dust Masks �7, 89Dynatherm Type Gaskets 55Econo Type Parts 4�Electrical Jumpers ��Electrical Tape 9�Electrodes �3Escutcheons-Split Ring 8�Expansion Plugs 90F.E. Meyers Type Gasket 6�Face Plate Screw 98Face Plates-Bath 98Fairbanks Type Gaskets 6�Faucet Washers �0�Faucets-Basin �0�Fiberglass Pipe Repair Kit 93Fill Box Gasket ��Fire Sprinkler Gauges 76Firomatic Type Gaskets ��Fitting Brushes 93Fittings-Brass Compression 87-88Fittings-Brass Flare 85-87Fittings-Brass Hose 84Fixed Hub Pulleys �5Flame Shield 93Flange Bolts-Toilet 97Flange Gaskets-Pipe 59-60Flanges-Circulator 33, 38Flappers 96Flange Tool-Circulator 33, 38Flanges-Circulator 33, 38Flare Adapters �6Flare Fittings 85-87Flaring Tool 94Flexible Oil Lines �9Flexible Pipe Couplings 8�Flint & Walling Type Gaskets 6�Floating Suction Oil Line �0Flush Valve 96Frost Free Sillcocks 80-8�Fuel Unit Bleeder Wrench 3, 6Fulflo Type Gaskets 10Furnace Pads-Miller Type �9G.E. Door Gasket �6

G.I. Can Gaskets ��Galvanized Compression Couplings 8�Garbage Disposal Wrench 94Gas Ball Valves �6 Gas Flare Adapters �6Gas Test Gauges 76Gasket Removing Solution 63, 9�Gasket Sheet Shears 70, 94Gasket Sheets 70-7�Gauge Adapter Fittings 78Gauge Glass 53Gauge Glass Parts 53-54Gauge Glass Valve Kits 53Gauges 73-77General Type Gaskets �0Georgia Pacific Type Gasket 61Globe Type Coupler 4�Gloves-Nitrile �7, 89Gloves-Vinyl �7, 89Goulds Type Gaskets 6�-6�Graphite Packing 79Grease 63, 9�Grit Cloth 93Grommets 90Grundfos Type Gaskets 4�Hago / Delta Type Gasket 9Hallmark Furnace Type Gaskets �5-�6Handhole and Manhole Gaskets 58Handle Puller 95Haywood Type O-rings ��Heil Type Gasket �6High Temperature Knit Tape �4High Temperature Rope �4Hinged Pipe Repair Clamps 83Hoffman Type Gaskets 56Honeywell Type Parts 9Hose Barbs 85Hose Bibbs 80, �0�Hose Caps and Gaskets 84Hose Clamps 83Hose Fittings-Brass 84Hose Parts 84Hot Water Valves 54ICP Type Gasket �6Ignition Wire ��Ignitors �3Immersion Wells 56Impeller Wrenches 30, 38, 94Industrial Combustion Type Parts �3-�4Jet Aerator Type Gaskets 6�Jiffy Rod Holders 98Johnson Type Gaskets �3Jumpers-Electrical ��Keys-Radiator 54Korky Type Flappers 96Knit Tape �4Kraissel Type Gaskets ��-��Lavatory Pop-Up Assemblies �00Lavatory Supply Tubes 96Lennox Type V-Belt �5Light Bulbs-Rough Service 89Lighter-Pilot �6Liquid Filled Gauges 75-76Locknut Wrench 95Lubricants 63Mack Washers �0�Manhole Gaskets 58Manometers 77McDonnell & Miller Type Gaskets 50-5�McDonnell & Miller Type Parts 50-5�Mechanical Packing 79Miller Type Parts �8-�9Monitor Heater Type Gaskets �4-�5Motor Bearing Puller 30, 38, 94Motor Capacitors 30


Motor Mounts �9, 36Motor Pulleys �5Needle Valves 78Nitrile Gloves �7No-Hub Couplings 8�Nozzle Adapters �0Nozzle Lines �9Nozzle Wrench �0OEM Cross Reference Chart �03-�06Oil Burner Couplings ��Oil Burner Pump Strainers �, �, 4, 5, 8, 9Oil Burner Safety Labels ��Oil Filter Gaskets �0-��Oil Filter Vacuum Gauge Adapter ��Oil Lines-Copper �9Oil Lines-Flexible �9Oil Tank Bushings (Duplex) �0Oil Tank Floating Suction Line �0Oil Tank Valves �0Olsen Type Gasket �6Open Mesh Grit Cloth 93O-ring Assortment Kit �0�O-ring Cord 57O-ring Cord Adhesive 57O-ring Puller 95O-rings �0�P.O. Plug Wrench 94Packing 79Peabody Barnes Type Gaskets 6�Petro Type Gaskets ��Philly Type O-ring ��Pilot Lighter �6Pilot Tubing �6Pigtail Steam Syphons 5�, 78Pipe Clamps-Hinged 83Pipe Couplings-No Hub 8�Pipe Couplings-Rubber 8�Pipe Flange Bolts and Nuts 60Pipe Flange Gaskets 59-60Pipe Plugs 3Pipe Repair Clamps-Hinged 83Pipe Repair Kit-Fiberglass 93Pipe Strap Wrench 93Plastic Case Gauges 74Plastic Supply Tubes 95Plugs-Brass 78Plugs-By-Pass 3Plugs-Pipe 3Plumbing Specialties 94-�0�Polybutylene Supply Tubes 95Pop-Up Waste Assemblies �00Pressure Gauges 73Pulleys �5Pump-Hand �0Pump Seals 63-69Pump Strainers-Oil Burner �, �, 4, 5, 8, 9Purolator Type Gasket ��PVC Ball Valves 79PVC Check Valves 8�PVC Compression Couplings 8�PVC Saw 93PVC Unions 8�Radiator Parts 54Radiator Tools 54, 94Radiator Valves 54Rapid Dayton Type Gaskets 63Ray Visco Type Gasket �4Riello Type Flexible Oil Line �9Riello Type Gaskets 8 Riello Type Oil Line Adapter �9Riello Type Parts 8Rinse Gun �0�Rope-High Temperature �4Rough Service Bulbs 89Rubber Flappers 96

Rubber Rolls 7�Saddle Valve 78Safety Labels-Oil Burner �0Sandcloth 93Saw-Boiler Cleaning (Soot) �7Schrader Valve �0, 78Seal Setting Tool 30, 69, 93Seals-Pump 3�, 37, 63-69Seat Disks 96Seat Wrenches 95Sewage Ejector Check Valve 8�Shafts-Blower �5Sheet Metal Screws �6, 89Shoe Covers-Disposable �7, 89Shovel-Soot �7Shower Arm Escutcheons 98Shower Arms 98Shower Heads 98Shower Rod Holders 98Shower Socket Wrench 95Shower Specialties 98-99Sight Glass and Gaskets 55Silicone Grease 63, 9�Silicone Spray 63, 9�Sillcock Key 80, 94Sillcocks-Angle 80Sillcocks-Frost Free 80-8�Single Union Ball Valves 79Sink Pop-Up Assemblies �00Sink Rinse Gun �0�Sink Specialties 99-�0�Sink Strainers 99Slip Joint Washers �00Slipnuts 55, �00Smoke Candles �3Smoke Matches �3Smoke Pellets �3Smoke Test Paper �4Smoke Tester �4Snubbers 77Solenoid Valve Gasket �4Soot Saw �7Soot Shovel �7Soot Snake �7Spouts 98Spring Flex Couplers �8Spud Wrench 54, 94Stainless Steel Supply Tubes 95Steam Parts 5�-54Sterling Type Gaskets 63Stewart Warner Type Gaskets 9Sticky Spray 63, 9�Stop and Waste Valves 80Stops 96Strainer Basket Assemblies 50Strainers-Oil Burner Pump �, �, 4, 5, 8, 9Strainers-Sink 99Strainers-”Y” 54Sundstrand Circulator Type Gaskets 4�-4�Suntec Type Parts �-5Supplies-Sink 95Supplies-Toilet 95Supply Stops 96Swedge Tool 93Taco Type Flanges 38Taco Type Gaskets 39-40Taco Type Parts 36-40Taco Type Seal Kits 36-40Tadpole Tape �4Tailpiece Washers �00Tank Lever 97Tankless Gasket Cross Reference Chart 49Tankless Heater Bolt and Nut 48Tankless Heater Gasket Sheets 48Tankless Heater Gaskets 43-49

PRODUCT INDEXTape-Aluminum Foil �4, 9�Tape-Duct �4, 9�Tape-Electrical 9�Tape-Teflon 92Teflon Grease 63, 92Teflon Packing 79Teflon Paste 92Teflon Tape 92Terminal Connectors ��Test Caps-Flexible 8�Test Leads ��Test Plugs 8�Thermo Pride Type Gaskets �6Thermometers 77Thrush Type Parts 4�Thrust Collar Kits �5Tie Down Straps 89Tip-Toe Drains 99Toilet Bolt Caps 97Toilet Flange Bolts 97Toilet Gaskets 97Toilet Specialties 96-97Toilet Supply Tubes 96Toilet Tank Lever 97Tools-Plumbing 93-95Torque Wrench 83, 94Tridicators 77Trip Lever Face Plate 98Tub Spouts 98Tube Clamps �7Tubing Cutters 93Tubular Pipe Connector �00Unions 8�Universal Burner Gasket �6Vacuum Bags �7Vacuum Cleaner Hose-Soot Snake �7Vacuum Gauge Adapter Fitting ��Vacuum Gauges 74Vak Pak Type Gasket 63Valliant Boiler Type Gasket 4�Valve-Schrader �0Valves-Brass Ball 79Valves-Gas �6Valves-Oil Tank �0Valves-PVC 79Valves-Radiator 54Valves-Single Union 79V-Belts �5Vent-Rite Type Gasket 56Vibro-Insulators 9�Viking Type Gaskets �3Vinyl Gloves �7Warren Type Gasket �4Washers-Slip Joint Nut �00Washers-Tailpiece �00Water Heater Element Wrench 94Water Heater Gas Flare Adapters �6Water Pump Gaskets 60-63Water Test Gauges 76Watson McDaniel Type Gasket 56Watts Type Gaskets 4�Wayne Type Gaskets �6Webster Type Parts 5-8Well Adapter 55Well Pump Gaskets 60-63Wells 56Winkler Type Gaskets 9Winterizing Plugs 90Wire Ties 89Woods Couplers �9Wrench-Fuel Unit Bleeder 3, 6Wrench-Nozzle �0Y Strainers 54York Type Gasket �6Zoom Spout Oiler 9�



Place orders online using our shopping cart feature.Find more than �500 different listings of heating, pump rebuilding and plumbing parts using our multi-functional search engines. Part listings are also accompanied by a picture for your reference.Take advantage of our unique “View Past Orders” section to look at previous orders you’ve placed. You can then order from this list. This website also enables you to save the current order you are working on by using our “Save Cart” feature. You can come back to it at another time if you are interrupted or save all of your orders for future reference. These can be activated to be your current order/cart at any time.Registration is required. This ensures that only authorized Wholesalers and Rebuilders, not the trade or general public, can see pricing and use the shopping cart.Download the SSC catalog, price list and all of our literature from the website.

••

•

•

•

•


WEBSITE INFORMATION

Documents

PUMP STRAINERS