83

84

VERSICONTROLTM RGB CONTROLLER SYSTEMS

DIGITAL DIMMER SWITCHESControl of light levels gives customers added value. The Digital Dimmer Switch options provide aesthetic options for application coordination and levels of light dimming. CSA listed, the Digital Dimmers are designed for the Marine and RV environments.

The ability to control RGB lighting is the key to a fun atmosphere. VersiControlTM controller options allow for physical or wireless control of VersiColorTM RGB Lighting products. The VersiControl controllers offer several options including single, dual, or four zone options for control of the RGB lighting experience on the interior or exterior.

LIGHTING CONTROL

85

Backlit LED Digital Dimmer

Digital Dimmer

ITEM NUMBER DESCRIPTION FACE PLATE FINISH

INTERIOR & BUTTON FINISH LISTING MAX

WATTAGE VOLTAGE MAXAMP DRAW

21030-BKBNBK Backlit LED Digital Dimmer

Black & Nickel Included Black CSA 100 W 10-24 V

8.3 A @ 12 V

4.16A @ 24 V

ITEM NUMBER DESCRIPTION FINISH LISTING MAXWATTAGE VOLTAGE MAX

AMP DRAW

21005 Digital Dimmer w/ Black Knob Black

CSA 80 W 12 V 6.7 A

21006-CH Chrome Cover Plate & Knob Chrome

21006-NI Brushed Nickel Cover Plate & Knob Brushed Nickel

21006-WH White Cover Plate & Knob White

21008-BL Black Cover Plate Black

• 10-24V DC dimmer can handle up to 100 watts of draw

• Works with halogen and LED fixtures• LED backlit power/night light button illuminates

until turned on• Separate power and dimming switches allow for

maintaining desired light output• Size and depth of slim style designed for marine

and RV applications• Dimming range: 5% - 100% with even gradual

transitions• Simple 3 wire installation ( Instructions Available )

• LED compatible• 12V DC 100 watt dimmer can

handle up to 80 watts of draw• Order dimmer and decorative

cover plate/knob separately• Dimming range: 15% - 100% with

even gradual transitions• Cover plates are ordered

separately• Simple wiring: 2 wire input from

power and 2 wire output to light fixtures. (Installation/wiring instructions available)

3.82"2.32"

1.86"

21030-BKBNBK[ Dimmer Comes Complete with Black & Nickel Bezel ]

Shown with nickel cover plate

3.7"2"

2"

.75"

Digital Dimmer Switches

21005

LIGH

TING

CO

NTRO

L

86

VersiControlTM RGB Bluetooth Controller

PIR Motion Sensor Power Switch

• Passive infrared (PIR) sensing technology designed to detect the movement of heat emitting bodies

• Automatic on/off operation. The sensor will turn the light on when motion is detected and off again when motion is not detected for three minutes

• Daisy chain multiple lights to a single PIR• Inline replaceable fuse prevents damage to

the system• Mounting screws included for simple

installation

• Available in black or brushed nickel finishes

• Single or dual zone controller• Free companion basic smartphone app allows

the user to control the color, brightness, and fade speed [ App download instructions included ]

• Simple wiring instructions included with controller allow for easy installation

• Ability to create and save up to 20 presents and save color modes to personal playlists

• RGB controller can be controlled by a smartphone or tablet

3.4"

3.4"

0.9"

4.9"

1.8"

0.9"

Single Zone

Dual Zone

ITEM NUMBER DESCRIPTION VOLTAGE MAX AMP DRAW CONNECTION TYPE IP RATING REMOTE

DISTANCE

230-00028 Single Zone12 - 24 V

4 A MaxBluetooth 4.0

IP2530 M

21070-12 Dual Zone 4 A/Channel12 A Max IP66

VersiColorTM RGB Controllers

ITEM NUMBER DESCRIPTION FINISH LISTING MAXWATTAGE VOLTAGE MAX

AMP DRAW

69300.30.054-XX PIR Motion Sensor Power Switch Black or Brushed Nickel UL 14 W 11 - 14 V 1 A

Specification Key [ Replace XX as indicated below ]

XX = Finish BK = Black Cover | NI = Brushed Nickel Cover

1.2"

2.2"

.5"

87

VersiControlTM RGB Simplified Knob Controller

• Simplified RGB wiring layout allows for easier installation while still maintaining four separate zones

• 10 Amp fuse protection on each RGB wire prevents damage to the controller in the event of a power serge or installation error

• Single knob controller allows for control of up to four zones with the addition of OEM supplied switches. The knob’s LED indicator displays the current color of the lights

• Three control settings including color selection, dimming, and speed of color fade

• Choice of silver for black knob finish options

4.8"

1.2"

1.6"

2.9"

ITEM NUMBER DESCRIPTION KNOB FINISH MAX AMP DRAW VOLTAGE IP RATING OVER CURRENT

PROTECTION

21053-SA Simplified Four Zone RGB Controller

Silver20 A Max 12-24 V IP55 10 A In-Line Fuse

21053-BA Black

VersiControlTM RGB Knob Controller

• Single or four zone control when used with supplied OEM switches

• Simple wiring instructions included with controller allow for easy installation

• Single knob controls all four zones together ensuring matching light color in all zones. Separate zone control with addition of OEM supplied switches

• Three setting options including color selection, dimming, and speed of color fade

• Black or silver knob finish options• The knob’s LED indicator displays the

current light color setting

ITEM NUMBER DESCRIPTION KNOB FINISH MAX AMP DRAW VOLTAGE IP RATING OVER CURRENT

PROTECTION

21050-SAFour Zone

Silver

20 A Max8 A Max Per Zone 12-24 V IP55 25 A In-Line Fuse

21050-BA Black

21060-SASingle Zone

Silver

21060-BA Black

21056-SAFour Zone Battery Saver

Silver

21056-BA Black

810-00190 Replacement Knob Kit N/A

4.8"

1.2"

1.6"

2.9"

LIGH

TING

CO

NTRO

L

88

VersiControlTM RGB Signal Amplifier

VersiControlTM RGB Fixed Color Selector

• Provides an additional power input that helps maintain the RGB signal over long runs

• Prevents dimming or sync issues with other RGB zones

• Recommended for use with flexible lighting lengths of 20' or more when using 14 gauge wire

• Lights can be run in parallel (not daisy chained) if amplifier amperage is not exceeded

• Allows factory to custom program a single color light option from a nearly unlimited RGB color spectrum

• Ideal for applications where a specific color is needed to match a design scheme

• Factory programing ensures the same color is used every time and eliminates the need for field programming

3.1"

1"

2.5"

ITEM NUMBER DESCRIPTION VOLTAGE MAX AMP DRAW IP RATING OVER CURRENT PROTECTION

21080-18 RGB Signal Amplifier 12-24 V 18 A Max6 A Max Per RGB Wire IP66 20 A In-Line Fuse

ITEM NUMBER DESCRIPTION VOLTAGE MAX AMP DRAW IP RATING

21060-001 RGB Fixed Color Selection Module 12-24 V 12 A Max4 A Max Per RGB Wire IP50

2"

3.2"

0.8"

89

VersiControlTM RGB Smart System• The smart system allows the user to independently control up to four zones of

lighting through either the pad controller or phone app• The smart system can be used as a stand alone product or integrated into the

digital dash via a CAN Bus system• Intuitive operation and easy visuals make controlling the lights functional and fun• The pad controller allows for adjustment of the color, brightness or color fades

on each zone, while the app provides even more control and customization features

• Pad and control module are available in 2 or 4 zone options• Small footprint and aesthetics integrate with dash and radio controls• IP66 water resistant rating

ITC VersiColorTM RGB Lighting

ITEM NUMBER DESCRIPTION INPUT VOLTAGE CURRENT BLUETOOTH TYPE REMOTE DISTANCE IP RATING

22500-RGB-XX Four ZoneRGB Control Module

11 - 28 V20 A max

8 A per zone max2.65 A per channel

Bluetooth 4.0 BLE(Operating system:

IOS 10.0/Andriod 5.0 or greater)

100 FT IP6622600-RGB-XX Two Zone

RGB Control Module

21055 Four ZoneRGB Pad Controller

10 - 28 V 0.5 A N/A21055-2Z Two Zone

RGB Pad Controller

Specification Key [ Replace XX as indicated below ]

XX = Connection 00 = No Connector on zone wires | 01 = Four pin Deutch connector on zone wires

Visit out VersiControlTM Help and Support site for operational tutorial videos, a quick reference guide, and frequently asked questions. www.versicontrol .com

LIGH

TING

CO

NTRO

L

90

• Control the color, color fade and brightness of each zone independently or together

• Backlit display provides easy in-the-dark control• Quick white button for convenience, security and

safety• Manual Bluetooth pass code reset

• Provides all the same control features of the control pad including color, color fade, brightness and quick white

• Additional control features available on the app include:

• Music beats• Camera color selection• Set personal custom color effects• On/Off timer• Individual zone lock-out• Personal pass code security

• Custom programming available for brand differentiation (Contact ITC for more information)

• Bluetooth and CAN Bus controlled• Smart FET protection and fusing on return lines• Individual microcontroller per zone and master

micro ensures consistent light output between all zones

• Simple dip switch controls allow for easy customization including:

• Setting the system to power up in either the on or off state

• Password reset back up

Control Module

Control Pad

Phone App

7.5"

5"

TOP VIEW

5"

SIDE VIEW

2"

3.1"

Ø2.6"