EFI carburetor & intake - Who-Sells-it

8 EFI carburetor & intake

8.02

EFI, ca

rburet

or & i

ntake

8

EFI INTRODUCTION

OPEN LOOP OPERATION

ElectronicControlModule

Base Map

AirFuel

Spark

EngineOperation

CLOSED LOOP OPERATION

Wide BandOxygenSensors

AutoTuneModule

ImmediateAFR

Feedback

ElectronicControlModule

Base Map

AirFuel

Spark

EngineOperation

Electronic fuel injection (EFI) performs similar to a carburetor/ignition system except exceptionally more

accurately. Since the first open-loop system used on FL models in 1995 we have come a long way with the current closed-loop system now being used on new bikes. By the end of 2009 models production there will be over 1.5 million H-D’s® on the road with injected engines.

How does EFI work? The EFI system works essentially like a carb yet with much more accuracy. It meters a specific amount of fuel and spark for the engine as per the demand of throttle position or load, engine temperature and RPM of the engine. Sensors on the engine feed back to the Electronic Control Module (ECM) what is happening and the computer determines the amount of fuel pulse for the engine requirement. There are two types of systems used on the motorcycles for measuring engine fuel demand; the current original equipment Speed Density system and aftermarket Alpha-N systems.

The O.E. Speed Density system approach is performed by using the universal gas law PV=nRT to calculate airflow in the engine. By measuring the vacuum in the intake manifold, the airflow can be determined using the gas law. The appeal of the speed density system is it’s forgiveness to blend maps or look-up tables for fuel delivery directly propor-tional to the manifold pressure. The disadvantage of the current O.E. closed loop system is that it uses narrow-band sensors for feedback which only tune or adjust low-load cruise rpm ranges; the system reverts back to open loop in other RPM areas. Adding post fuel devises or specialty software requires an initial tuning session and in most cases follow up tuning as the ambient conditions that the vehicle is operated in change.

Alpha-N throttle-position/RPM based systems are favored for their simplic-ity, accuracy and performance by using engine rpm, throttle position, intake air temperature and engine temperature to determine fuel flow. It is by far the best

performance system, yet also requires the most tuning to establish the all-important base map. ThunderMax® has rewritten the book on this task by providing a vast library of base maps for most all factory and aftermarket engine combinations. Its AutoTune system equipped with wide-band oxygen sensors automatically fine-tunes the base map to perfectly match the engine’s requirements as the bike is ridden. Constant wide-band feedback keeps the engine in an optimum state of tune no matter what conditions or elevations the motorcycle is operated in.

In addition, this system is virtually the only way a high performance engine that carries little vacuum can be properly tuned. High lift/wide overlap cams can cause pressure reversions that fool the MAP sensor on a speed density system into improper fuel delivery for the map sensor reading. Throttle-position/RPM based systems are widely used on per-formance engines like Indy car and F1, and now Harley-Davidson® motorcycles thanks to ThunderMax®.

ElectronicFuel

Injection

*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. Please see cautionary information in back of catalog.

WWW.CUSTOMCHROME.COM 8.03

TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

EFI INTRODUCTIONABOUT THUNDERMAX®

The ThunderMax® EFI is a complete, stand alone ECM for all Delphi® based H-D motorcycles. This high-resolution Alpha/N-based system is the easiest to use yet most advanced engine management system available. The ThunderMax® ECM is not a post-fuel device, or a “signal modifier”. It is a complete, powerful and accessible ECM equipped with a Wide Band AutoTune module that replaces the original equipment unit. The ThunderMax® EFI system is a joint development and distribution project between two industry leaders, Zipper’s Performance Products and Thunder Heart Performance Corporation. Since 1981 Zipper’s has been at the forefront of engine development for aftermarket engine components and kits for the H-D aftermarket. Thunder Heart Performance Corporation engineers, designs and manufactures high technology systems and components for motorcycle manufacturers. Nine years ago Dan Fitzmaurice and the team at Zipper’s meet with Jerry Korrect and Shane Scott of Thunder Heart to discuss the need of a powerful aftermarket injection system for use on Harley-Davidson® motorcycles. This meeting was the seed to the creation of the ThunderMax system. The technical and engineering background of both groups has help propel ThunderMax to an upward ascent as the most powerful system available today. The phrase ‘EFI Made Simple’ means the engineering makes the system powerful, yet easy to use.

Our companies are committed to developing the best engine manage-ment and fuel injection products in the industry. Our staff is dedicated to top-notch customer support. The ThunderMax comes with a 3 year limited warranty.

For additional information including software and instruction updates as well as ThunderMax Cams by Red Shift, please visit the ThunderMax website www.Thunder-Max.com

“I just had my 2007 Softail fitted with the 103” kit and cams. A hi-flow air cleaner, etc... I opted for the ThunderMax with Auto Tune unit as to avoid dyno-ing all the time and I liked the idea of the Auto Tune. WOW! No popping on back throttle, awesome power, response, smoothness, idle and sound! My bike is now twice as good as it ever was… I am totally impressed.”

M.H.P. – Western Australia

“Installed this on my 2007 SE Ultra 110. Before the bike was excessively hot and the rear cylinder would ping and the bike would lose power. Since the ThunderMax and Auto Tune, the bike has excel-lent throttle response and power. Rode it in the 99 degree South Texas heat with no heat issues and excellent power! I installed the entire system in two hours (hardest part was replacing the NB-O2 sensors with the WB-O2 sensors). Very easy!”

L.D. , Texas

“This unit has transformed my FXSTC into some-thing I actually enjoy riding now. Pulls strong, runs cooler and still gets 44 mpg.”

R.B. – Canada

EFI GLOSSARY OF TERMS Accel Fuel – Factor of fuel enrichment during rapid throttle movement.

AFR (Air Fuel Ratio) – Percentage of air and fuel as measured from a single engine cycle. Example an AFR of 14:1 = 14 parts of air per 1 part of fuel by weight.

Auto-Tune – A feedback devise with complex algorithms using Wide Band sensors, which works specifically with ThunderMax ECM.

Barometric Pressure – The measured atmospheric pressure at the ECM, this is a variable factor relative to absolute atmospheric pressure, and ultimately effects the AFR in your engine. Base Map – A set of curves that determine the amount of fuel and ignition timing required for each operating condi-tion, for one engine configuration.

Crank Position Sensor – Determines the precise location and speed of the crankshaft.

DTC Warnings – Diagnostic Trouble Codes

ECM – Electronic Control Module IAC (Idle Air Control) –A stepper motor which controls bypass air function in the throttle body. The IAC’s main purpose is to control airflow requirements at idle. IAC Stop – A virtual lower limit for the IAC position. Ignition Timing – A variable point at which ignition spark occurs, measured by degrees of advance or retard relative to top dead center position of the piston.

Injector Duty Cycle – Percentage of time the injector is powered by the ECM per combustion stroke. Narrow-Band Oxygen Sensor – An oxygen sensor used to measure the amount of unburned oxygen in the exhaust stream of an operating engine. The term narrow band refers to the small range of AFRs that the sensor can report to the ECM. A factory sensor is a narrow band, typically a 2, 3 or 4 wire oxygen sensor.

Wide-Band Oxygen Sensor – A type of sensor which is capable of precisely measuring exact air/fuel ratios.

Open Loop – No feedback “loop”; manual changes to the base map required to alter or adjust the AFR. The ECM operates solely off of the Base Map File regardless of the engine’s operation.

Closed Loop - The use of a feedback sensor (oxygen sensor) to correct fuel delivery based on past air/fuel ratio readings.

Oxygen Sensor – An electronic sensor that measures the proportion of (O2) in gas being analyzed. Stoichiometric Air-Fuel Ratio (Stoichiometry) – This is the Ideal balance of reactants and products for the chemical equation associated with the operation of combustion. For gasoline applications, a stoichiometric mixture is found to have an air-fuel ratio (AFR) of 14.7:1, or 6.8% Fuel. TPS (Throttle Position Sensor) – A potentiometer attached to the throttle shaft which communicates throttle position to the ECM using a voltage signal.

8.04

EFI, ca

rburet

or & i

ntake

8

THUNDERMAX FUEL INJECTION ECM

ThunderMax® ECM with Auto-Tune Closed Loop System by Zipper’s®

Does Your EFI Bike Pop? Spit? Backfire? Start Hard? Run Hot? Deliver Poor Fuel Mileage and Performance? Would you like to have full control of your EFI system, freedom to make major or minor adjustments without a master’s degree in electronics and computers? Here is a simple solution—ThunderMax® with AutoTune! The ThunderMax® is a completely new product that replaces the factory module, not an add-on box or signal modi-fier. The ThunderMax® is purpose-built to deliver uncompromising performance but you don’t have to be a rocket scientist to install it, program it or make adjustments.Just how easy is it? Installation is a straightforward replacement of the factory module and oxygen sensors*. The ThunderMax® SmartLink software contains hundreds of base maps that cover over 80% of popular factory and aftermarket combinations, dyno-developed by Zipper’s on real motorcy-cles. Choosing a map is a quick and easy process thanks to SmartLink’s sorting filters; loading a map takes less than a minute. After that, you’re ready to start the motorcycle. Once running, let the bike warm up at idle to operating temperature while the Smartlink software automatically dials in idle and warm-up settings for that particular engine and you’re ready to ride! During your ride, every time you ride, the ThunderMax® AutoTune module analyzes the air/fuel ratio read by the wide-band oxygen sensors at warp speed after every cylinder fire and makes any necessary adjustments to the injector pulse width to achieve the desired air/fuel ratio while compensating for variations in injectors, fuel pressure, throttle body or exhaust flow. With every tank of fuel, at any temperature or elevation, your engines’ tune is optimized by ThunderMax®! As simple as we’ve made it to install and use, don’t be fooled into thinking that this not one of the most sophisticated systems you can buy for your Harley®. Using the supplied SmartLink software and communication cable, you can adjust or monitor virtually every parameter of the system.

Adjust and monitor:

645515 645516

645519

645520645521

645500

• Select Closed Loop AFR/RPM Targets • Adjust Idle Speed RPM• Adjustable Rev Limit • Igniting Timing • Automatic IAC Calibration• Speedometer Calibration • Decel Pop Control • Read Diagnostic Codes • Running Statistics / Logs

• Accel Pump Simulation • Start Fuel Pulse • Engine Temp Alarm • Injector Size Compensation • Live Engine Tuning • Live Monitoring • Live Recording • Map Analysis Feature• Digital Tech Compatible

• Nitrous Compatible • Supercharger Compatible • Specific Racing Settings• Warm-up Settings • One-Button Support• Three Year Warranty• And Many More!

The ThunderMax® makes sense in the long run as the system can grow and change as your engine does—just load a new map! ThunderMax software, firmware and maps updates are free and accessible 24/7 with an Internet connection so you’re only a mouse-click away from the latest available data and product support. Dyno Tuners can access Advanced User SmartLink software that allows full custom mapping of virtually any engine combina-tion. The ThunderMax® is designed and manufactured right here in the USA and backed by a 3-year warranty! Requires exhaust system equipped for or modified for use with two oxygen sensors.645500 ThunderMax® ECM with AutoTune Closed Loop System. Fits 2002 to 2007 Touring models, 2001 to 2009 Softail models and

2004 to 2009 Dyna Glide models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $930.99

645514 ThunderMax® ECM with AutoTune Closed Loop System for 2007 to 2009 XL Sportster® models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $899.99

645515 ThunderMax® ECM with AutoTune Closed Loop System for 2002-2009 V-Rod® models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $899.99

645516 ThunderMax® ECM with AutoTune Closed Loop System for 2008 to 2009 Touring models with Throttle By Wire.. . . . . . . . . . . . . . . . . . . . . . . . $989.99

Note: Legal in California only for racing vehicles which may never be used upon a highway.

Optional and replacement parts for ThunderMax® ECM systems.645519 Replacement O2 sensors for all ThunderMax® EFI with Auto tune module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $107.99

645520 Y- harness: The ThunderMax® AutoTune gets its power and communicates to the ECM through the motorcycle’s factory data port plug. This “Y” harness allows the AutoTune module to be plugged in with an additional plug remaining open for other tasks . . . . . . . . . . . . . . . . $34.99

645521 Pigtail harness: This pigtail harness allows a second port for the communication cable connection to the ThunderMax® ECM. It is installed to the bike’s wire harness at the 36-pin ECM connector. Handy for models with tight clearances around the ECM such as Dyna®,Softail® Rocker® and 2002-2005 V-Rod® models. Requires ThunderMax® ECM with serial number 114000 or higher (produced beginning August 2008) Will not work on previous model ThunderMax® ECM’s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

THUNDERMAX FUEL INJECTION ECM

645517

645519

645520 645521

Thundermax® 50ECM with Auto Tune ARB-Legal, Closed Loop System by Zippers®

The ThunderMax® ‘50’ is a self-tuning closed-loop engine management system for 2001-2006 88” Twin Cam® bikes originally equipped with Delphi® open-loop EFI. The ThunderMax® ‘50’ installs easily and optimizes your engines’ tune as you ride. Because the ThunderMax® ’50’ is a closed-loop system, the ThunderMax® ‘50’ ECM uses feedback data from the wide-band oxygen sensors and AutoTune module to ensure that the engine con-stantly maintains the optimum air/fuel ratio to maintain excellent throttle response, power and economy. Requires an exhaust system modified for or equipped with two oxygen sensor bungs.

Features:

• Easy installation.• Increase torque and power over

stock system.• Maintains excellent fuel economy.• System properly self tunes aftermarket

exhaust systems.• Adjust Idle Speed RPM.

• Adjustable Rev Limit.• Speedometer Calibration.• Decel Pop Control.• Read Diagnostic Codes.• Running Statistics / Logs.• Engine Temp Alarm.• Live Monitoring.

• Live Recording.• Map Analysis Feature.• Digital Tech Compatible.• One-Button Support.• California Legal Product.• ARB Executive Order # D-644

645517 Fits fuel injected Twin Cam 88”® Softail® models from 2001 thru 2005, Touring models from 2002 thru 2005 and Dyna Glide models from 2004 thru 2005. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $899.99

645518 Fits fuel injected Twin Cam 88”® Softail® and Touring models 2006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $899.99

Optional and replacement parts for ThunderMax® ECM systems.645519 Replacement O2 sensors for all ThunderMax® EFI with Auto tune module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $107.99

645520 Y- harness: The ThunderMax® AutoTune gets its power and communicates to the ECM through the motorcycle’s factory data port plug. This “Y” harness allows the AutoTune module to be plugged in with an additional plug remaining open for other tasks. . . . . . . . . . . . . . . . . $34.99

645521 Pigtail harness: This pigtail harness allows a second port for the communication cable connection to the ThunderMax® ECM. It is installed to the bike’s wire harness at the 36-pin ECM connector. Handy for models with tight clearances around the ECM such as Dyna®,Softail® Rocker® and 2002-2005 V-Rod® models. Requires ThunderMax® ECM with serial number 114000 or higher (produced beginning August 2008) Will not work on previous model ThunderMax® ECM’s.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $18.99

THUNDERMAX

8.06

EFI, ca

rburet

or & i

ntake

8Features• Simultaneously auto-tune fuel curves for front and rear cylinders

under actual riding conditions with new WEGO IIID dual channel wide-band oxygen sensor interface

• Fully programmable plug-in replacement for Delphi® controller• Robust alpha-N (throttle position and RPM based) fuel control elimi-

nates problems with long duration/high overlap camshafts• Full support for SAE J1850 data bus used on 2004-2008 models

(except 2008 Touring bikes with electronic throttle control) • Powerful Windows software for custom programming and extended

data logging and diagnostics• Support for new 6th gear indicator on 2007 and later modelsThe TCFI solves tuning problems with highly modified engines using the same system as High-end automotive racing. Alpha-N (throttle position and RPM based) fuel control. Alpha-N eliminates any dependence on manifold pressure and is unaffected by long duration/high overlap cam-shafts. The TCFI brings this proven technology to the H-D® marketplace.The TCFI kit includes the new WEGO IIID dual channel wide-band exhaust gas oxygen interface that allows auto-tuning during actual on-

road riding conditions. The kit includes Bosch LSU 4.2 wide-band sen-sor for both front and rear cylinders. The user programs a table with the desired air/fuel ratios - the system then does the rest. No Dyno tuning required!Idle air control including idle RPM and cold start characteristics are fully programmable. This facilitates the use of aftermarket throttle bodies with higher airflow.The third generation TCFI fully supports the new SAE J1850 data bus used by 2004-2008 H-D® motorcycles for communications between the engine control module, instrument cluster, turn signal/security module, and diagnostic scan tools. The TCFI also has built-in data logging that stores data for the last 60 minutes of operation at 10 samples/second. PC communications is by means of a USB interface that plugs directly into the existing H-D® diagnostic connector. Windows compatible soft-ware allows use of laptop for programming and data analysis.672531 TCFI III Fuel Injection Kit 2001-2008

Twin-Cam with Delphi® system. . . . . . . . . . . . . . . . . . . . . . . . . $879.99Note: (not for 2008 Touring bikes with electronic throttle body). Includes TCFI III Plug-in Fuel Injection Controller, USB Interface for PC Link, WEGO IIID Dual Channel Wide-band Exhaust Gas Oxygen Sensor Interface, two Bosch LSU 4.2 Wide-band Exhaust Gas Oxygen Sensors, and two 18 x 1.5mm Weld Nuts for exhaust pipe. Not Legal for sale or use on pollution controlled vehicles.

672531

Daytona Twin Tec TCFI Gen III Fuel Injection Controller Kit

Daytona Twin Tec® Twin TunerPermits you to easily adjust your fuel injection to match the requirements of peformance parts including camshafts, free flowing exhausts, and low restriction air filters, by adding or subtracting fuel. Installation only takes 10-15 minutes and is very easy, with no splicing, cutting, crimping, or bulky interconnection. The Twin Tuner also has an advanced mode, where you can use the optional USB Interface and PC Link Tuner software to make precise fuel adjustments. The PC Link Tuner software uses the same RPM rows and throttle position columns as the Dynojet Power Commander. If you have created Dynojet Power Commander files for your applications, you can enter the same values into our tables. You can make independent adjustments to the front and rear cylinders.• Increased horsepower• Improved throttle response• Easy plug-in installation and setup• Very compact size – only 4"-long x 2"-wide x 1/2"-tall• Can use Dynojet Power Commander maps• Compatible with Twin Scan II and Tuning Aid• Low cost672530 Fits all fuel-injected Big Twins from 2001 thru 2007 . . . . .$209.99

DAYTONA TWIN TEC

Notice: If your highway motorcycle is emission-controlled, that is, if it is newer than a 1978 model, any modification to the carburetor is a violation of Federal law and the laws of some states. Further, modifications to the air cleaner which affect the air flow, or change the configuration of the air cleaner or air inlet system, is likewise a violation of law. Such modification may not be per-formed on any motorcycle in which is used on public roads or highways.

Daytona Twin Tec



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

DAYTONA TWIN TEC FUEL INJECTION COMPONENTS

Twin Scan II Plus Kit by Daytona Twin TecWhen the WEGO IIID is connected, the Twin Scan II will log engine data along with the actual air/fuel ratio (AFR). Logged AFR data can be analyzed and displayed for Twin Cam 88® or V-Rod™ applications with Delphi® system.You can also display and print out the required volumetric efficiency (VE) correction (in percent) based on the AFR command. You can add data from an unlimited number of files that you previously saved. The data will be analyzed and incorporated into the table. Cells that vary more than ±0.5 AFR from the target value are shaded blue for rich or red for lean. You can easily make the required corrections in the SERT Tuning Mode or PC program by referring to the printed VE percent correction table and marking off cells as you edit them.

Features• Ideal tuning aid for Screamin Eagle® Race Tuner (SERT), Dynojet Power

Commander (PC), and Daytona Twin Tec Twin Tuner. Twin Scan soft-ware analyzes logged data and displays front and rear cylinder air/fuel ratio (AFR) and the required volumetric efficiency (VE) correction (in percent) with the same RPM rows and throttle position sensor (TPS) columns used in the SERT, PC, and Twin Tuner tables.

• Includes all features of the standard Twin Scan II.• Sold as a complete kit including the WEGO IIID dual channel wide-

band exhaust gas oxygen sensor Interface for logging AFR data along with engine data.

Twin Scan II Plus Kit, (includes Twin Scan II, WEGO IIID)672496 Interface, two Bosch LSU 4.2 wide-band oxygen sensors, two

18 x 1.5 mm weld nuts, two 18 x 1.5 mm hex socket plugs, USB cable, and software on CDROM. . . . . . . . . . . . . . . . . . . . . . . . . $522.99

672496

WEGO III Wide Band Air Fuel Ratio Aid by Daytona Twin TecFeatures• Complete air/fuel ratio metering system with built-in data logging.

Includes WEGO III Wide-Band Exhaust Gas Oxygen Sensor Interface, Bosch LSU4.2 5-wire wide-band oxygen sensor, 18x1.5mm weld nut for mounting sensor on exhaust pipe, and software on CDROM.

• Versatile tuning aid for all carbureted and fuel injected engines displays AFR (air/fuel ratio) and logs over 2 hours data including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure.

• Can be used for on-road or dyno testing. • Highly accurate with less than ±0.10 AFR error over 10.3 – 19.5

AFR range.• Easy free-air calibration procedure corrects for sensor aging effects. • 0-5V analog AFR output for interface to dyno instrumentation.• Water-proof ultra-bright daylight readable blue LED display with

automatic dimming under low light conditions.• Wide supply voltage range from 11-16V allows operation from

battery on small engines and race vehicles without an alternator. Current drain is approx. 1 amp

• Built-in USB interface.• Compact size: 4”L x 2”W x 0.5”H.• WEGO data logging software runs under Windows 98/ME/XP/Vista. The

software allows viewing AFR, engine RPM and analog data with user defined scaling. Data can also be exported to Excel for further analysis.

672497 Wide-Band AFR Metering System. Includes WEGO III with 42” harness for motorcycle applications, Bosch LSU4.2 5-wire sensor, 18x1.5mm weld nut, and software on CDROM. Sold each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $399.99

C C C672497

Progressive Nitrous Controller & Data Loggerby Daytona Twin TecThe NC-2 can directly drive two nitrous stages with progressive control (modulated flow).

Features 672495

• Drives two nitrous stages and purge solenoid. NC-2 is capable of 40 amp out-put on each stage.

• Each stage is independently program-mable based on throttle position, RPM, vehicle speed, time delay, and first gear lockout. NC-2 adds capability for RPM or time based progressive control.

• Output for purge solenoid (requires external relay). Programmableautomatic purge when system is armed.

• Flexible RPM input compatible with high voltage coil drive (vehicles with coil packs or distributor ignition), standard 12 volt tach signal, or low level logic drive (newer vehicles with coil-on-plug).

• General purpose input/output (GPIO) terminal. Programmable for use as shift light output, additional stage enable input, or control output for ignition retard.

• Status LED output (ideal for use with arming switch containing LED).

• Built-in data logging. Ideal as basic vehi-cle data logger during dyno tuning or drag racing. Logs data whenever system is armed. Stores last 5 minutes of data at 10 samples/second.

• Data logged includes throttle posi-tion, RPM, vehicle speed, status of all inputs and outputs, and two 0-5 volt analog inputs.

• 0-5 Volt analog inputs are compatible with Daytona Sensors single or dual channel WEGO II systems for logging wide-band air/fuel ratio data.

• Heavy duty industrial grade clamping terminal blocks allow easy and reliable hookup without soldering or crimping.

• Compact size: NC-1 is 3.3”L x 2.4”W x 1.1”H and NC-2 is 4.1”L x 2.8”W x 1.1”H (not including mounting feet and terminal block).

• USB interface to laptop PC. Powerful Windows soft-ware for programming controller and downloading logged data.

672495 Progressive Nitrous Controller and Vehicle Data Logger. . . . . . . . . . . . . . . . . . . $306.99

Not legal for sale or use on pollution controlled vehicles.

8.08

EFI, ca

rburet

or & i

ntake

8

Terminal Velocity III Closed-Loop Fuel Management System by Terry Component

FUEL INJECTION TUNERS


CARB Compliant

• California Street Legal• The only “Closed Loop” Fuel Management System that utilizes the

factory Dephi® ECU and factory sensors• Quick connect plugs for easy installation• Available for all 2008-up Throttle by Wire models• Available for all Harley® Delphi® & Magneti-Marelli® ECU• Works in conjunction with factory “Close Loop System” and uses both

factory O2 sensors• No manual adjusting ”Tamper proof” surface mount design

• Maximizes performance and efficiency while decreasing emissions and fuel consumption

• Replaces costly and punishing Dyno time• Automatically adjust as you ride and compensates for changes in load

conditions• Re-calibrates for specific modifications made to your motorcycle such

as pipes, air cleaner, etc.• Increases horsepower and torque up to 20% for most motorcycles• Works in conjunction with both factory and race tuner downloads• Made in USA

602410 Fits 2001 Softail® models, all models with Delphi® fuel injection 2002 thru 2004 and V-rod® models 2002 thru 2007. Has Flat “Throttle Position Sensor” plug and includes one O2 sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99

602411 *Fits 2005 Dyna Glide™ models, all Softail® and Touring® models 2005 thru 2006. Has Round “Throttle Position Sensor” plug and includes one O2 sensor . . . . . . . . . . . . . . . . . . . . . . . .$499.99

Note: On 2005 Harley® models they had two different Throttle Position Sensor plugs. If it’s a Flat Throttle Position Sensor plug you should use CCI# 602410 Terminal Velocity III unit.

602412 Fits all Big Twin models with Magneti Marelli® fuel injection from 1995 thru 2001. Has Flat “Throttle Position Sensor” plug and includes one O2 sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$499.99

602413 Fits Softail® models 2007 thru 2009, Dyna Glide™ models 2006 thru 2009 and all 2007 Touring® models. Has Round “Throttle Position Sensor” plug and uses factory O2 sensors . . . . . . .$479.99

602414 Fits Touring® models 2008 thru 2009. Has 6 pins Oval “Throttle Position Sensor” plug and uses factory O2 sensors . . . . . . .$499.99

602415 Fits Sportster® models 2007 thru 2009. Has Flat “Throttle Position Sensor” plug and uses factory O2 sensors . . . . . . .$479.99

602416 Fits V-Rod® models 2008 thru 2009. Has Flat “Throttle Position Sensor” plug and uses factory O2 sensors . . . . . . .$499.99

602405 Replacement O2 sensor (sold each). . . . . . . . . . . . . . . . . . . . . .$114.99

602406 Replacement O2 sensor bung (sold each) . . . . . . . . . . . . . . . . .$17.99

The Only Closed Loop Fuel Management module that is now Street Legal in all states including

California


TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

FUEL INJECTION TUNERS

RideMaxx™ Plus Wireless EFI Tuner by American Micro-Fuel Device Corp. (AMFD)With a few more up-graded features the RideMaxx™ Plus really lets you feel the power of what your bike can do. Made in USA.• New RideMaxx Plus features fuel accelerator pump• Fuel accelerator delivers extra fuel to match the engine’s needs

during quick throttle movements• Fuel accelerator pump delivers a considerably snappier

throttle response• Software for most portable Bluetooth enabled devices included• Wireless and Cable free for 5 minute installation• Comes pre-programmed for true plug-and-play installation• RideTuner Handlebar mount includes pre-set Power, Economy,

and Auto settings• Works with any air filter and exhaust• Full Map database included with software CD for Windows PC’s and

most Bluetooth enable handhelds, Windows PC Software is available on www.americanmicrofuel.com

• Bluetooth enabled for full wireless tuning capabilities• Offers full range of rich and lean fuel adjustment• Eliminates backfiring, pinging, popping on deceleration• Up to 15% increase in Horsepower• Up to an added 3 – 6 miles to the gallon (15 – 30 miles per tank)• Includes FuelMaxx, RideTuner, Software, and Battery640210 Fits Twin Cam® Touring models from 2002 thru 2006 open loop

system with no O2 sensors and 36 pin ECU plug . . . . . . . . $329.99

640211 Fits Twin Cam® Softail® models from 2001 thru 2006 open loop systems. with no O2 sensors and 36 pin ECU plug . . . . . . . $329.99

640212 Fits Twin Cam® Touring models 2007 only, close loop system with O2 sensors and 36 pin ECU plug. . . . . . . . . . . . . . . . . . . $359.99

640213 Fits Twin Cam® Softail® models from 2007 to present close loop system with O2 sensors and 36 pin ECU plug. . . . . . . . . . . . $359.99

640214 Fits Twin Cam® Touring models from 2008 to present close loop system with O2 sensors and 73 pin ECU plug. . . . . . . . . . . . $359.99

Note: Not legal for sale or use in California on any pollution controlled motor vehicles.

640210

RideMaxx™ Wireless EFI Tuner by American Micro-Fuel Device Corp. (AMFD)RideMaxx™ leads the EFI Control Industry with its wireless handlebar controlled EFI Tuner. RiderMaxx™ is comprised of two units – the wireless RideTuner handlebar mount, and the wireless FuelMaxx ECU module. The RiderTuner mounts directly on to your handlebar and enables you to select from three separate modes-Power, Economy, or Auto. The RideMaxx™ unit takes only a few minutes to install. It plugs directly into the ECU, and talks wirelessly to the RiderTuner. It’s that simple – two maps, three settings, all your choice. Used only on Delphi® EFI equiped models. Made in USA.• Comes pre-programmed for true plug-and-play installation• RideTuner Handlebar mount includes pre-set Power, Economy, and

Auto settings• Works with any air filter and exhaust• Full Map database included with software CD for PC’s, and available

on www.americanmicrofuel.com• Bluetooth enabled for full wireless tuning capabilities• Offers full range of rich and lean fuel adjustment• Eliminates backfiring, pinging, popping on deceleration• Up to 15% increase in Horsepower• Up to an added 3 – 6 miles to the gallon (15 – 30 miles per tank)• Includes FuelMaxx, RideTuner, Software, Battery, and

Installation tools640200 Fits Twin Cam® Touring models 2002 thru 2006 open loop sys-

tem with no O2 sensors and 36 pin ECU plug . . . . . . . . . . $299.99

640201 Fits Twin Cam® Softail® models 2001 thru 2006 open loop sys-tems, with no O2 sensors and 36 pin ECU plug. . . . . . . . . . $299.99

640202 Fits Twin Cam® Touring models 2007 only, close loop system with O2 sensors and 36 pin ECU plug. . . . . . . . . . . . . . . . . . . $333.99

640203 Fits Twin Cam® Softail® models 2007 to present close loop sys-tem with O2 sensors and 36 pin ECU plug . . . . . . . . . . . . . . $333.99

640204 Fits Twin Cam® Touring models 2008 to present close loop sys-tem with O2 sensors and 73 pin ECU plug . . . . . . . . . . . . . . $333.99

Note: Not legal for sale or use in California on any pollution controlled motor vehicles.

Ness® Big Shot™ Adjustable Fuel Injection TunerA load-based fuel injection module that does not require any splicing or modifications to your motorcycle during installa-tion. Big Shot™ modules come pre-loaded with base maps for different models which can then be fine tuned for each individual’s riding style and bike with three buttons. Tuning is so easy that laptops and dyno machines are not required to maximize your motorcycle’s performance.The Big Shot™ detects the exact amount of load on the engine at any RPM and any road speed and delivers the perfect amount of fuel to the engine for optimum performance. This is a superior design over fuel injection modules that work off of throttle position. As throttle posi-tions can be the same at different speeds and with different loads on the engine, with the same amount of fuel injected into the engine in these varying conditions, performance can suffer.

Available in CARB

Compliant Models

49 State Models618600 Fits all fuel-injected Big Twins from 1995 thru 2005. . . . . $253.99

618602 Fits 2006 fuel-injected Softail® and Touring models . . . . . $253.99

618604 Fits 2006 Dyna Glide® models . . . . . . . . . . . . . . . . . . . . . . . . . . $292.99

618609 Fits 2007 thru 2008 Sportster® models . . . . . . . . . . . . . . . . . . $292.99

618610 Fits all 2007 thru 2008 Big Twin models (Except 08 FLT). . $301.99

631166 Fits all 2008 FLHT / FLTR Models . . . . . . . . . . . . . . . . . . . . . . . . $299.99

631167 Fits all 2008 V-Rod Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $299.99

CARB Compliant Models618611 Fits 1995 thru 2005 Big Twins . . . . . . . . . . . . . . . . . . . . . . . . . . $249.99

618612 Fits 2006 Softail® and FLT models. . . . . . . . . . . . . . . . . . . . . . . $249.99

618613 Fits 2006 Dyna™ models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $299.99

618616 Fits 2007 thru 2008 Sportster® models . . . . . . . . . . . . . . . . . . $299.99

618617 Fits 2007 thru 2008 Big Twin models (Except 08 FLT). . . . . $299.99

e toll

8.10

EFI, ca

rburet

or & i

ntake

8

8.10

EFI, ca

rburet

or & i

ntake

8

REVTECH DFO STEALTH

THE RED RUN IS A STOCK EFI ROAD GLIDE THE BLUE

RUN IS WITH A POWER COMMANDER INSTALLED. THE

GREEN RUN IS WITH THE DFO ADDED.


RevTech® DFOOptimize your fuel injection without the need for expensive dyno tuning! Developed by Mark Dobeck, the inventor of the original Jet Kit, the DFO allows you to quickly dial in your engine’s fuel delivery, whether on a stock bike, or with freer flowing air fil-ter and/or exhaust added. Installation takes less than an hour, and adjustments are made by the simple turn of a screwdriver. A little experimentation produces results you can feel, whether simply removing a lean hiccup or flat spot on your stock bike or maximizing the effect of your aftermarket exhaust.

• Simple screwdriver dial-in• Provides crisper throttle response• Three range adjustable fuel delivery curve• Compact size, only 31/2" x 11/2" x 3/4",

allows convenient mounting• Simple, reliable, and excellent for expert

mechanics or do-it-yourselfers!• New DFO HP provides additional tuning

capabilities for highly modified engines

How it worksThe RevTech® DFO modi-fies the outgoing signal from the ECU to your injectors, increasing the duration of the spray of fuel, thereby richening the mixture. Adjustable pots allow you to add fuel where it is needed over three areas of the rev range. A fourth pot allows you to set a transition point from light-load cruise to high-fuel performance mode. This allows both basic tuning and more sophisticated fine-tuning for specific racing situations. The transition feature also has a load sensitive function that overrides the base rpm setting to allow an earlier crossover whenev-er large throttle openings are introduced at low rpm's. If, while operating in the light load/cruise mode, the DFO detects a rapid opening of the throttle, a pre-determined amount of additional fuel is added to further increase throttle response and acceleration beyond what a factory fuel map will deliver.


TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

RevTech® Stealth DFO for 2006-Up Big TwinsThe Stealth DFO has OEM-style connectors for an effortless installation. It is designed for use on high-compression/high horse power engines between 88” and 96”in displacement and the stealth technology is required on 2006-up Big Twins.601206 Stealth DFO for 2006 Softail® and Touring models

(except Dyna Glide® models) . . . . . . . . . . . . . . . . . . . . . . . . . . .$235.99

601208 Stealth DFO for 2006 thru 2009 Dyna Glide® models, 2007 thru 2009 Softail® models and 2007 Touring models. . . . .$259.99

RevTech® Stealth DFO HP for 2006-Up Big TwinsThe Stealth DFO HP has OEM-style connectors for an effortless installa-tion and allows for more fuel to be added for applications with 95" or more of displacement. Its stealth technology is required on 2006-up Big Twins.601207 Stealth DFO HP for 2006 Softail® and Touring models

(except Dyna Glide® models) . . . . . . . . . . . . . . . . . . . . . . . . . . .$235.99

601209 Stealth DFO HP for 2006 thru 2009 Dyna Glide® models, 2007 thru 2009 Softail® models and 2007 Touring models. . . . .$259.99

RevTech® Stealth DFO for 1995 thru 2005 Big TwinsThe Stealth DFO has OEM-style connectors for an effortless installation. Its stealth technology is required on 2005 Big Twins.601203 Stealth DFO for 1995 thru 2005 Softail® and Touring

models, and 2004 thru 2005 Dyna Glide® models. . . . . . . .$235.99

RevTech® Stealth DFO HP for 1995 thru 2005 Big TwinsThe Stealth DFO HP has OEM-style connectors for an effortless instal-lation. Designed for high-compression/high horse power engines. Allowing for more fuel to be added for applications with 85 or more horsepower. Its stealth technology is required on 2005 Big Twins.601205 Stealth DFO HP for 1995 thru 2005 Softail® and Touring

models, and 2004 thru 2005 Dyna Glide® models. . . . . . . .$235.99

RevTech® Stealth DFO for 2002 thru 2007 V-Rod® ModelsThe Stealth DFO has OEM-style connectors for an effortless installation. Its stealth technology is required on 2005 V-Rod® models.601204 Stealth DFO for 2002 thru 2007 V-Rod® models . . . . . . . . .$235.99

RevTech® Stealth DFO for 2007 thru 2009 Sportster® ModelsThe Stealth DFO has OEM-style connectors for an effortless installation.601197 Stealth DFO for 2007 thru 2009 Sportster® models . . . . . .$249.99

RevTech® Stealth DFO HP for 2007 thru 2009 Sportster® ModelsThe Stealth DFO HP has OEM-style connectors for an effortless installa-tion and allows for more fuel to be added for applications with high-compression engines putting out 90 or more horsepower.601198 Stealth DFO HP for 2007 thru 2009 Sportster® models . . .$249.99

RevTech® Stealth DFO for 2008 thru 2009 Touring ModelsThe Stealth DFO has OEM-style connectors for an effortless installation.601888 Stealth DFO for 2008 thru 2009 Touring Models . . . . . . . .$249.99

RevTech® Stealth DFO HP for 2008 thru 2009 Touring ModelsThe Stealth DFO HP has OEM-style connectors for an effortless instal-lation. Allows for more fuel to be added for applications with high-compression/high horse power engines.601889 Stealth DFO HP for 2008 thru 2009 Touring Models . . . . .$249.99

RevTech® Stealth DFO for 2008 thru 2009 V-Rod modelsThe Stealth DFO has OEM-style connectors for an effortless installation.601890 Stealth DFO for 2008 thru 2009 V-Rod models . . . . . . . . . .$249.99

REVTECH DFO STEALTH

RevTech Digital Fuel Optimizer

601203

8.12

EFI, ca

rburet

or & i

ntake

8

THUNDERMAX THROTTLE BODIES

ThunderMax® Air Cleaner by Zipper’s®

This assembly is designed for use with all ThunderMax EFI throttle bod-ies. Substantially increases intake airflow capabilities to the levels nec-essary to maximize the performance and efficiency of your ThunderMax throttle body. Features billet backplate construction, heavy-duty sup-port brackets that are adjustable for different height engines, breather hardware and a washable, oil-type MaxFlow 2 3/4” deep filter element. 645509 For use with all ThunderMax throttle bodies . . . . . . . . . . . $244.99Note: Legal in California only for racing vehicles which may never be used upon a highway

ThunderMax® Throttle Body by Zipper’s®

Building a performance big-inch EFI engine? Zipper’s ThunderMax EFI throttle body, manifold, and high-flow air cleaner assembly provide the big airflow required for high performance engines. These oversize 50mm and 54mm CNC-machined castings replace the 44mm factory throttle body used on Delphi®-equipped models, and are designed to accept the factory electronic components, including injectors, making assembly a snap.645503 50mm throttle body ONLY for Big Twins from 2001

thru 2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $389.99

645504 54mm throttle body ONLY for Big Twins from 2001 thru 2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $389.99

Note: Manifold, throttle body, air filter and cover sold separately. Requires professional EFI mapping after installation.

ThunderMax® EFI Manifolds by Zipper’s®

Available in different widths to match cylinder lengths used on stock and larger displace-ment engines. They are also available in two intake port sizes; standard 1.625" I.D. to fit stock port diameters and oversize 1.780" I.D. to fit larger ports found in S&S and Zipper’s High Output heads. Matching ThunderMax® EFI manifolds are available for both 50mm and 54mm ThunderMax® throttle bodies and for most popular engine kits from 95" up to 124". For use with ThunderMax® Throttle Bodies in Big Twin appli-cations from 2001 thru 2005.645505 For stock length cylinders with standard

1.1625" port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $191.99

645506 For stock length cylinders with oversized 1.780" port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $191.99

645507 For 5.013"-5.016"-length cylinders with oversized 1.780" port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $191.99

ThunderMax® One-Piece Throttle Body/Manifold Assembly by Zipper’s®

Building a performance big-inch EFI engine? Zipper’s ThunderMax EFI components provide the big airflow required for high performance engines. These oversize 54mm and 60mm CNC-machined castings replace the 46mm factory throttle body and manifold used on models with throttle cables from 2006 to present. They are designed to accept the factory electronic components, including injectors, making assembly a snap.645501 54mm throttle body for Big Twins from 2006

thru 2009*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $614.99

645502 60mm throttle body for Big Twins from 2006 thru 2009* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $614.99

Note: Requires ThunderMax air filter (sold separately). Requires professional EFI mapping after installation. Legal in California only for racing vehicles which may never be used upon a high-way. *Not for 2008-up Touring models

hunderMax®xxFI Manifolds by ipper’s®

vailable in different



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

FUEL INJECTION COMPONENTS

Parts for Fuel Injected Models by Standard Motor ProductCompetitively prices and high quality American made alternative to the Original Equipment replace-ment components for Electronic Fuel Injection (EFI) systems for Delfi™ & Magneti Marelli. Sold each.

617535

617531

17516

617520

61752217517

617524

617536

617529

617527

617532

617528

617521

617523

617530

617520 Fuel injector for Twin Cam® models from 2001 thru 2005 with Delfi™ EFI system (repl. OEM# 27609-01 & 27609-04) . . . . .$136.99

617521 Fuel injector for Twin Cam® Touring models from 1999 thru 2001, green cap (repl. OEM# 27135-97) . . . . . . . . . . . . .$243.99

617527* High flow fuel injector .47 lbs/hr flow rate (3 bar) for Twin Cam® models from 2001 thru 2005 with Delfi™ EFI system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$189.99

17517 Air temperature sensor for Big Twin models from 1995 thru 2005 (repl. OEM# 27270-95). . . . . . . . . . . . . . . . . . . . . . . . .$39.99

617522 Engine temperature sensor for Twin Cam® fuel injected models from 1999 thru 2005 (repl. OEM# 32466-99). . . . . . .$34.99

617523 Throttle position sensor for Twin Cam® models from 2001 thru 2005 with Delfi™ EFI system (repl. OEM# 27629-01). . . . . . . .$62.99

617532 Throttle position sensor for Twin Cam® models from 2006 thru 2008 with Delfi™ EFI system (repl. OEM# 27659-06). . . . . . . .$30.99

617524 Map / barometric sensor 100 kpa for fuel injected Evolution® Touring models from 1995 thru 1998 with Magneti Marelli EFI system (repl. OEM# 32424-95) . . . . . . . . . . . . . . . . . . . . . . . .$57.99

617531* High performance map / barometric sensor 250 kpa for fuel injected Evolution® Touring models from 1995 thru 1998 with Magenti Marelli EFI system. . . . . . . . . . . . . . . . . . . .$67.99

617528 Map / barometric sensor with seal for Twin Cam® models from 1999 thru 2007 (repl. OEM# 32316-99) . . . . . . . . . . . . . .$62.99

617529 Idle air control motor for Twin Cam® models from 2001 thru 2005 (repl. OEM# 27628-01). . . . . . . . . . . . . . . . . . . . . . . . .$45.99

617536 Idle air control motor for Twin Cam® models from 2006 thru 2008 (repl. OEM# 27658-06). . . . . . . . . . . . . . . . . . . . . . . . .$45.99

17516 Fuel pressure regulator 300 kpa for Touring from models 1995 thru 2001 with Magenti Marelli EFI system. (repl. OEM# 27219-95). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

617530* Fuel pressure regulator 350 kpa Touring models from 1995 thru 2001 with Magenti Marelli EFI system. . . . . . . . . .$76.99

617535 Engine coolant temperature sensor for V-Rod® models from 2006 thru 2008 (repl. OEM# 32315-01) . . . . . . . . . . . . . .$15.99

*Note: Not legal for sale or use in California on any pollution controlled motor vehicles.

8.14

EFI, ca

rburet

or & i

ntake

8

23404

23405

23401

23866

Mikuni HSR42/HSR45 CarburetorsCustom bike builders looking for Mikuni per-formance and show-winning style will find everything they’re looking for in these ver-sions of the popular Mikuni carburetors. Mid-range jetted for easy bolt-on installation to a wide variety of bikes. Comes without cables or intake adapter to permit tailoring to specific custom applications. Available in polished and standard aluminum finishes.23871 Polished HSR45 carb ONLY . . .$569.99

23420 Standard HSR45 carb ONLY . .$431.99

23866 Polished HSR42 carb ONLY . . .$499.99

23411 Standard HSR42 carb ONLY . .$358.99

Replacement Parts23864 Rebuild kit for HSR42/45 carbs $37.99

23860 K&N 21/2"-wide filter element $73.99

23421 K&N 3"-wide filter element . . .$74.99

23861 Chrome air cleaner cover (without cutout) . . . . . . . . . . . . .$54.99

23422 Chrome air cleaner cover (with cutout) . . . . . . . . . . . . . . . .$49.99

23863 Short idle adjusting screw (does not include spring). . . . . .$13.99

23427 Long idle adjusting screw (does not include spring). . . . . .$11.99

260804 42/45 Intake manifold for Twin Cam 88® models with MAPS hole . . .$60.99

23438 42/45 Intake manifold for Evolution® models without hole . . . . . . . . .$68.99

23439 Rubber flange adapter for late 42mm carb. Black w/stainless clamp. . . . . . . . . . . . .$25.99

675003 Rubber flange adapter for late 45mm carb. Black w/stainless clamp. . . . . . . . . . . . .$24.99

23440 Clamp for CCI #’s 23438 and 23439 only. . . . . . . . . . . . . . . . . . .$2.99

23857 Rubber flange adapter for early HSR42 carbs. Black w/stainless clamp. . . . . . . . . . . . .$25.99

23796 Rubber flange adapter for early HSR45 carbs. Black w/stainless clamp. . . . . . . . . . . . .$25.99

Cables for Mikuni HSR42 and HSR45Throttle Idle Cable

23423 23424 38"-long, 1996-up . . . . .$28.99

23425 23426 47"-long, 1996-up . . . . .$28.99

23433 23434 38"-long, 1970-1995 . . .$28.99

23435 23436 47"-long, 1970-1995 . . .$28.99

23859 Choke cable . . . . . . . . . . . . . . . . . . .$25.99Note: Applications listed here are for early Mikuni kits ONLY. Kits manufactured after May of 1999 use stock cables.

Mikuni ‘HSR42’ and ‘HSR45’ Smoothbore Carburetors and KitsImprove starting, rideability, power and torque. The adjustable accelerator pump and smoothbore design combine to give a big increase in air flow over the earlier ‘HS40’ for excellent throttle response in any riding situation. Other features include a two-piece throttle slide that rolls on stainless roller bearings, a lighter throttle return spring, a low-speed air screw, and an enlarged needle valve and float bowl. All kits are specifically designed for each application.

HSR42 ‘Easy’ Carburetor KitsHigh-performance kits mount to stock intake manifold and include the carburetor, adapters, air cleaner cover (where necessary), and detailed installation/tuning manuals.23403 Fits Twin Cam 88® models from 1999 to 2006 and 1990 thru 1999 Evolution®

Big Twin models using Screamin’ Eagle® air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $388.99

23404 Fits Evolution® Big Twin models with CV carburetors from 1990 thru 1999 . . . . . . . . $448.99

23405 Fits 1200cc Sportster® models from 1994 thru 2004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $448.99

23406 Fits 1200cc Sportster® and carbureted Buell® models from 1994 thru 2006 (requires aftermarket high-performance air cleaner assembly) . . . . . . . . . . . . . . . . . . . $418.99

Deluxe ‘Total’ HSR42 and HSR45 KitsWith a high-performance intake manifold and free-flowing K&N filter assembly, Mikuni’s ultimate performance package has more top-end power and crisper throttle response. Each kit includes a 42mm or 45mm carburetor, manifold, air filter assembly, chrome air cleaner cover, hardware and detailed installation instructions and a tuning manual. These kits include a crankcase breather kit and utilize your stock throttle and idle cables.23400 HSR42 kit for Twin Cam 88® models from 1999 to 2006. . . . . . . . . . . . . . . . . . . . . . . . . . . .$608.99

23401 HSR42 kit for Evolution® Big Twins from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . $578.99

23444 HSR45 kit for Evolution® Big Twins from 1984 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . $659.99

23445 HSR45 kit for Twin Cam 88® models from 1999 to 2006 with performance modifications or 95" big-bore kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $659.99

Note: 1984-1990 models require the use of Original Equipment or aftermarket throttle and idle cables from 1991-1995 models.

MIKUNI CARBURETORS



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

Mikuni 48mm Smoothbore Carburetor KitsSerious performance carburetor for race applications only! Will supply the fuel delivery needs for 120+ horsepower engines when used with an electric fuel pump (not included). This larger version of the HSR42 and HSR45 series carburetors will not clear the gas tank on stock models, and cannot be used as direct replacement for stock carburetor. Features 78mm bolt hole centers and Kits use O.E. style cables.675001 Polished carb kit (contains 48mm polished carb, S&S rubber flange adapter

for “Super G” intake manifold, and four main jets) . . . . . . . . . . . . . . . . . . $719.99

041165 Rubber flange adapter for S&S “Super G” intake manifold . . . . . . . . $24.99

MIKUNI CARBURETORS

Mikuni Carb Kits for Shovelhead and Early Sportster® Engines by Primo RiveraNow you can have the legendary performance of the Mikuni carb for your Shovelhead or early ironhead Sportster® engine. These 42mm Mikuni carburetor kits come complete with Hi-Flow Mikuni air filter assembly with chrome cover, Rivera intake manifold (cast finish) and all required brackets and mounting hardware.041156 Fits Shovelhead Big Twins

from 1966 thru 1984 . . . . . . . . . . . . . . . . . . . . $657.99

041157 Fits Sportster® models from 1957 thru 1983. . . . . . . . . . . . . . . . . . . . . . . . . . $643.99

8.16

EFI, ca

rburet

or & i

ntake

8 Twin DCOE Dual Throat Weber Carburetor KitsAwesome performance and the most intimidating look on the road! These kits contain two Weber factory certified chromed carburetors, intake manifolds, 5" chrome velocity stacks, debris screens, Weber jet kit for fine tuning, dual pull throttle cable, support brackets and a genuine Custom Chrome-Weber full-color Tuning Manual. Fits all carbureted Evolution® Big Twin models from 1984 thru 1999. Note: Some owner/installer modifications may be required. Some bikes with lumpy cams and rigid engine mounting may require additional mount supports to be fabricated by installer.

47547 45mm Throat Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3,399.99

Note: Carburetors which have been chromed and/or modified by third parties/vendors will not be warranted by Weber North America.

Weber carburetors are the best choice for top performance and show quality appearance!Weber North America brings you the best ultra-high performance carburetors, factory designed, chromed and tested. After chroming, each carburetor is machined, assembled and flow tested, then certified to guarantee excellent performance. They are built specifically for V twin applications with enhancements made to the fuel delivery and metering systems. Weber carburetors feature changeable venturis, idle jets, main jets, air corrector jets and accelerator pump jets so they can be tuned to suit any big twin from stocker to stroker while delivering reliability, drivability and performance. Kits are available for all carbureted Evolution® Big Twin models from 1984 thru 1999 and Twin Cam 88® motors from 1999 to 2005.

Single Dual-Throat Forward Facing DCOE Carburetor KitsThese best selling kits increased horsepower 20% and torque 17% over the stock carburetor in independent dyno tests. The individual runner manifold makes perfect tuning easy with this hot set-up. Kit includes a Weber factory certified chromed dual throat carburetor, chrome individual runner intake manifold, linkage, velocity stacks, mounting bracket with hardware, Weber jet kit for tuning, and a genuine Custom Chrome Weber Tuning Manual. Fit all carbureted Evolution® Big Twin models from 1984 thru 1999.

80"–96" engines47540 45mm Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,299.99

WEBER CARBURETORS

DCOE D l Th t W b C b t Kit

47540



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

47548

47549

Parts and Accessories for Weber Carburetors & Kits47544 5"-long velocity stacks (sold in pairs) . . . . . . . . . . . . . . . . . . . $129.99

47548 Velocity stack screens with boots (sold in pairs) . . . . . . . . . . $35.99

47549 Rebuild kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.99

5560003 Replacement K&N air filter for billet air cleaner assy . . . . . $34.99

Calibration Parts for Weber CarburetorsDial in your Weber carburetors right with genuine Weber calibration parts. All jets sold in pairs and venturis sold each.

Jetting KitsInclude a range of each jet type for dialing in your carbs. Kits are for one carb.For DCOE Carburetors ONLY

47401 45mm kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $82.99

Main JetsSold in pairs.For DCOE, MCHH and IDF Carburetors

47921 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.99

WEBER CARBURETORS PARTS . ACCESSORIES

47549

f

47401

47544

Carburetor Parts

8.18

EFI, ca

rburet

or & i

ntake

8 Cable Adjuster for Mikuni CarbsMetric thread adjuster for most Mikuni carbs to keep cables in adjustment. 6mm x .75 mm thread. Sold each27864 Mikuni Cable Adjuster. . . . . . . . . $7.99

Chrome Top Covers for Mikuni CarburetorsBrighten up the top of your carburetor with a chrome cover. Chrome mounting hardware, gasket and wrench included. Fits 42mm and 45mm carburetors. Sold each.23794 Smooth. . . . . . . . . . . . . . . . . . . . . . $22.99

23795 HSR logo. . . . . . . . . . . . . . . . . . . . . $22.99

CV Air Cleaner to Mikuni Adapter KitIncludes everything you need to mount stock or aftermarket air cleaners originally designed for CV carbs to a Mikuni carburetor.23870 Complete kit . . . . . . . . . . . . . . . . . $17.99

23867 Adapter only. . . . . . . . . . . . . . . . . $13.99

23868 Screw set (3) . . . . . . . . . . . . . . . . . . $4.99

23869 O-ring (sold each) . . . . . . . . . . . . . $1.49

Replacement Parts for Mikuni ‘HS40’ Smoothbore CarburetorsYou can still get the service parts to keep that faithful old smoothbore working fine.24014 Rebuild kit . . . . . . . . . . . . . . . . . . . $28.99

17388 Rubber carburetor coupler . . . $17.99

24028 Black vinyl throttle cable . . . . . $23.99

24029 Black vinyl idle cable . . . . . . . . . $23.99

24030 K&N air filter element . . . . . . . . $49.99

24043 Chrome air cleaner cover . . . . . $49.99

Jet Assortment for Mikuni CarbsJet assortment fits HSR42 and HSR45 carburetors. Includes 2 each of 150 thru 170 main jets, 2 each of 22.5 thru 35 pilot jets, 1 each of 95, 96, and 97 needles. 2 #60 accelerator pump nozzles and clips and washers.23882 44-piece jet assortment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.99

Chrome Top Co ersReplacement Parts for Mikuni

JJtn2

CV Adapter23442 Billet adapter for Mikuni

HS40 carburetors . . . . . . . . . . . . . $99.99

23443 Billet adapter for Mikuni HSR42 carburetors . . . . . . . . . . $104.99

Individual Jets for HSR42 and HSR45Sold in packs of 5 . . $12.99Main Jets

29740 #150 main29741 #152.5 main29742 #155 main29743 #157.5 main29744 #160 main29745 #162.5 main29746 #165 main29747 #167.5 main29748 #170 main29749 #172.5 main29750 #175 main29751 #177.5 main29752 #180 main29760 #200 main

MIKUNI CARBURETOR PARTS . ACCESSORIES

CV Adapter

Accelerator Pump NozzlesSold each. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99

23428 5023429 6023430 70

Pilot JetsSold each. . . . . . . . . . .$12.99

29761 #20 pilot29762 #22.5 pilot29763 #25 pilot29764 #27.5 pilot29765 #30 pilot29772 #32.5 pilot29766 #35 pilot29773 #37.5 pilot29767 #40 pilot29768 #45 pilot29769 #50 pilot29770 #55 pilot29771 #60 pilot

Individual Jet NeedlesSold each. . . . . . . . . . . .$9.99

23412 -95 for HSR4223413 -96 for HSR4223414 -97 for HSR4223415 -98 for HSR4223416 -95 for HSR4523417 -96 for HSR4523418 -97 for HSR4523419 -98 for HSR45



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

041000

SU Eliminator II Carburetor Kits by RiveraKits include SU “Eliminator II” carburetor with polished dome, chrome leveling bracket, intake manifold, push-pull throttle bracket, and comprehensive instructions. Carbs are jetted for stock engines. Two extra needles are included to cover most modified engines including strokers to 86 cubic inch. Kits Include solid mount, upswept manifold that works with most fuel tanks including 5.0 gallon Fat Bobs. Air cleaner sold separately.600093 Fits Evolution® Big Twin models from 1984

thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $705.99Note: 1990 thru 1999 models require conversion to pre-1990 throttle cables and 1993 thru 1999 require breather kits.

600092 Fits Shovelheads 1966-1984 with close-in manifold. If used with single pull throttle order CCI #041031 bracket. . . . . . . . . . . . . . . . $612.99

Accessories040011 K&N replacement filter element . . . . . . . . . . . $39.99

041001 Chrome air cleaner . . . . . . . . . . . . . . . . . . . . . . . . $49.99

041031 Bracket for single pull throttle cable . . . . . . . $13.99

041036 SU carburetor rebuild kit . . . . . . . . . . . . . . . . . . $39.99

632300 Replacement filter element. . . . . . . . . . . . . . . . . $3.49

041001

Zenith/Bendix Carburetors38mm CarburetorsDuplicates of the Original Equipment Bendix carb with optional adjustable mainjet. Fits all Sportster® models from 1957-early 1976 and all Big Twin models from 1969 thru 1975. May also substitute in most Keihin ‘butterfly’ applications.24305 Carb with adjustable mainjet (repl. OEM 27155-72B). . . . . . . . . . . . . . . . . $335.99

24264 Carb without adjustable mainjet (OEM 27155-72TB) . . . . . . . . . . . . . . . . . $319.99

24262 American-made rebuild kit (repl. OEM 27132-71T) . . . . . . . . . . . . . . . . . . . . $39.99

15903 Imported rebuild kit (repl. OEM 27132-71). . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99

26202 Imported accelerator pump only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99

40mm CarburetorFeatures a 40mm venturi and an adjustable mainjet, and is set-up for ‘push-pull’ throttle cables and a VOES switch. Fits Big Twin models from 1969 thru 1989 and Sportster® models from 1957 thru 1987.24306 40mm carburetor (repl. OEM 27155-72B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . $465.99Note: Installation on Evolution® models requires the additional purchase of a CCI #15917 Cable Accessory Kit.

15916 40mm carburetor rebuild kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $54.99

Replacement Float Bowl for Bendix/Zenith CarbsManufactured in the U.S.A. by Zenith (formerly Bendix). Fits all Sportster® models from 1972-early 1976 and Big Twins from 1971 thru 1975 as well as aftermarket Zenith or Bendix carbs.24267 Replaces OEM 27645-71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $69.99

Bendix Carburetor Float040501 Replacement float for 1971-up Bendix carburetors

(replaces OEM 27630-71) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99

Main Jets040505 .95 (C66-183-19). Replaces OEM 27651-75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

040506 1.00 (C66-183-20). Replaces OEM 27652-75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

040507 1.05 (C66-183-21). Replaces OEM 27653-75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

040508 1.10 (C66-183-22). Replaces OEM 27654-75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

040509 1.15 (C66-183-23). Replaces OEM 27655-75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

040510 1.20 (C66-183-24). Replaces OEM 27656-75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

Fuel Inlet Fitting For Bendix CarburetorsChrome inlet fitting fits stock Bendix/Zenith carbs on Big Twin and Sportster® models from 1971-early 1976 (replaces OEM 63578-52).020534 Sold in a pack of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.99

SU . ZENITH BENDIX CARBURETOR KITS

24305 2430624305 24306

8.20

EFI, ca

rburet

or & i

ntake

8Accelerator Pump

CutawayVenturi CutawayEnrichener Detail

S&S ‘Super E’ and ‘Super G’ Carburetors and Carburetor KitsThe next generation of high performance carburetors from S&S is here. The ‘Super E’ carburetor has a 17/8" throat and is approximately 17/16" shorter than previous models providing an overall installation length the same as stock.The ‘Super G’ carburetor’s throat is 21/16" and is designed for high per-formance use on 74 cubic inch and larger Big Twin models with modified heads, cams, stroker flywheels and big bore cylinders.Both the ‘Super E’ and ‘Super G’ carburetors have a fully adjustable idle and interchangeable midrange and high speed jets.All carburetor kits include: S&S teardrop air cleaner, fuel line, clamps, extra main jets, intake manifold for stock-length cylinders, bracket and complete instructions.

S&S Carburetors ONLYJetted for stock 80 cubic inch applications. Other applications may require carburetor re-jetting.260195 “Super E” for all models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $304.99

260196 “Super G” for all models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99

S&S Dealer KitsThe S&S Dealer Stocking Parts kit contains a selection of “must have” parts. It’s designed to help dealers by making it easier for them to service S&S products, and ultimately to provide better service to their customers. CCI #601766 contains all the parts needed to service and tune S&S car-buretors. In addition, the kit contains the most commonly needed gaskets and parts to service S&S oil pumps, as well as top end gaskets for S&S engines of various styles and bore sizes. The CCI #601767 Jet Kit and CCI #601768 Carb Parts Kit may be purchased separately.601766 S&S Dealer Master Parts Kit . . . . . . . . . . . . . .$1,356.99

601767 S&S Dealer Jet Kit . . . . . . . . . . . . . . . . . . . . . . . . $285.99

601768 S&S Dealer Carb Parts Kit . . . . . . . . . . . . . . . . . $307.99

S&S Throttle Cable Guides for Stock CablesIt is no longer necessary to change throttle cables for Super “E” or “G” carburetor installations on Big Twins. The new longer cable guide CCI #040595 fits 1990 and later “CV” (constant velocity) throttle cables for Big Twins. The origi-nal short throttle cable guide fits the 1981-1989 style stock H-D and S&S “butterfly” style throttle cables for Big Twins040595 Fits 1990-up Big Twins with CV carburetors . . $10.99

040596 Fits Big Twins with Butterfly carburetors from 1981 thru 1989 . . . . . . . . . . . . . . . . . . . . . . $10.99

Note: Not for Sportster® models.

040595

l C bl G id

Float Bowl Cutaway

S&S Carburetor KitsFor Big Twin ModelsSuper E Super G Fit Information

45708 n/a Fits Panhead and Knucklehead models with O-ring intake seals$499.99 45815 n/a Fits Shovelhead models with O-ring manifold seals from $474.99 1966-early 1978 45821 45819 Fits Shovelhead models with rubber band manifold seals late $486.99 $499.99 1978 thru 1984

45672 45677 Fits Evolution® Big Twin models from 1984 thru 1992$484.99 $529.9945670 45675 Fits Evolution® Big Twin models from 1993 thru 1999 $504.99 $524.99 (except fuel injected)

45979 45978 Fits Twin Cam 88® models from 1999 to 2006 $509.99 $529.99 (except fuel injected)

Super B Super G Fit Information

632185 n/a Fits Shovelhead models with rubber band manifold seals late $534.99 1978 thru 1984

For Sportster® ModelsSuper E Fit Information

45822 Fits Sportster® models with O-ring manifold seals from 1957-early 1978. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $466.99

45817 Fits Sportster® models with rubber band manifold seals late 1978 thru 1985 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $489.99

45674 Fits Evolution® Sportster® models from 1986 thru 1990 . . . . . . . . . . . . . $506.99

45673 Fits 5-speed Sportster® models from 1991 thru 2003 . . . . . . . . . . . . . . . . . $514.99

S&S CARBURETORS



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

S&S Master Jetting KitIncludes one each of intermedi-ate: jets .025, .0265, .028, .0295, .031, .032 and .033. One each of main jets: .062, .064, .066, .070, .072, .074, .076, .078, .080, .082 and .084.45620 Fits S&S Super ‘E’ and

‘G’ carburetors . . $72.99

S&S Mast Jetting KitS&S Master Jettie

S&S Super “E/G” Replacement PartsIndividual replacement parts for popular S&S “E/G” model carburetors. Refer to S&S instruction sheet. All items are sold in packs of 10 unless noted otherwise.040575 O-ring, accelerator pump cap (S&S #371) . . . . . . . . . . . . . . . . . $8.49

040576 Check ball, accelerator pump (S&S #272) . . . . . . . . . . . . . . . . . $3.99

040577 Diaphragm, accelerator pump (S&S #282) sold each. . . . . . $12.99

040578 Seat, float needle (S&S #465) sold each . . . . . . . . . . . . . . . . . . $10.99

040579 Needle, float bowl (S&S #195) sold each . . . . . . . . . . . . . . . . . $10.99

040580 O-ring, carb-to-manifold (“E” models only, S&S #387) . . . . . $7.99

040581 O-ring, carb-to-manifold (“G” models only, S&S #356). . . . . $7.49

040582 O-ring, injector nozzle (S&S #287) . . . . . . . . . . . . . . . . . . . . . . . . $6.99

040583 O-ring, float needle seat (S&S #345) . . . . . . . . . . . . . . . . . . . . . . $9.99

645820 Bowl gaskets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.99

Adjustable Enrichener for S&S CarburetorsThis adjustable enrichener replac-es the stock fixed enrichener on all S&S Super “B” and “D” carbu-retors. Allows for easier starting and warm up. Sold each040448 S&S Adjustable

Enrichener . . . . . . . $9.99

S&S Super “E/G” Replacement Parts

040578

040577

040576

040575

040579

040581040580040582

040583

645820

S&S Carburetor JetsFit S&S carburetors. Sold in packs of 3 to 6. . . . . . . . . . . . . . . . . .$9.99 to $20.99

Main Jets Intermediate Jets

Main Jet Tuning PacksFit S&S Super ‘B’ and ’E’ carbs.84314 .062 thru .072 (6 jets)84315 .066 thru .076 (6 jets)84316 .072 thru .082 (6 jets)84317 .078 thru .088 (6 jets)84318 .090 thru .098 (5 jets)84319 .100 thru .108 (5 jets)84320 .110, .115, .120 (3 jets)84331 .062 for TÜV carbs

(5 jets)

Intermediate JetsFit S&S Super carburetors (except Two Throat). Sold in packs of 3.Part # Size Part # Size

84322 .0250 84327 .032084323 .0265 84328 .033084324 .0280 84329 .036084325 .0295 84330 .040084326 .0310

S&S Carb Rebuild KitsBody Rebuild KitKits contain all the necessary parts needed to rebuild S&S carburetor bodies.19503 Fits ‘Super A’ and ‘Super B’ (17/8") carburetors (imported). . . .$16.99

45801 Fits Super ‘E’ carburetors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.99

45802 Fits Super ‘G’ carburetors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $36.99

Master Rebuild KitsEverything for a complete rebuild including the throttle shaft and plate with screws and needle/seat assembly.260090 Fits ‘Super A’ and ‘Super B’ (17/8")

carburetors (imported) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99

45695 Fits ‘Super E’ carburetors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $70.99

45696 Fits ‘Super G’ carburetors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $73.99

45801

Adjustable Choke Device for S&S Super CarbsA must when installing custom air cleaners to S&S Super B/E/G carbs. This fully adjustable device avoids the mixture getting too rich and reduces fouling. Works with the Super B air cleaner also.Sold each84332 S&S Adjustable

Choke Device . . . $29.99

Idle Mixture Screw for S&S Super CarbsReplacement idle mixture screw and spring for all S&S Super0 E/G carbs.684311 Idle mixture screw

(pack of 5) . . . . . . $33.99

684312 Idle mixture spring (pack of 10) . . . . . . $5.99

260090

S&S CARBURETOR PART . ACCESSORIES

S&S Carburetor Main Jet Tool45693 Fits S&S

main jets. . . . . . . . $11.99

S&S Carburetor Main Jet Tool

Adjustable Choke fbl E i h

8.22

EFI, ca

rburet

or & i

ntake

8Flange-Style AdaptorsAdaptors for Mikuni and Lectron® carbs. Constructed of reinforced, temperature-resis-tant synthetic rubber, these versatile adaptors permit the mounting of 36-44mm spigot-style carbs to all stock flange-style manifolds.17372 Fits mounting 36-38mm spigot-style

carbs to flange-style manifolds with a 23/4" center-to-center stud spacing . . . . . . . . . . . . . . . . . $17.99

17373 Fits mounting 40-44mm spigot-style carbs (except Mikuni smoothbore) to flange-style manifolds with a 35/16" center-to-center stud spacing . . . . . . . . . . . . . . . . . $19.99

17388 Replacement adapter for Mikuni ‘HS40’ smoothbore carburetor kits with 215/16" center-to-center stud spacing . . . . . . . . . . . . . . . . . $17.99

Chrome Intake ClampsChrome clamps machined into matched halves for a tight, perfect fit combined with supe-rior sealing and strength. Include sockethead hardware. Sold in pairs.11100 Fit Shovelhead, Sportster® and

Panhead models from 1955-early 1978 . . . . . . . . . . . . . . . .$16.99

11103 Fit Shovelhead and Sportster® models from late 1978 thru 1985 . . . . . . .$16.99

Intake Manifold SealsO-ring style for Shovelhead, Panhead and Sportster® intake manifolds from 1955-early 1978. Pack of 10.12085 Replaces OEM 27060-55. . . . . . . . . .$4.99

Rubber band style for Shovelhead and Sportster® models from 1978 thru 1985. Pack of 10.25102 Replaces OEM 27062-78. . . . . . . . .$17.99

Intake Seals for Sportster® ModelsCarburetor to intake manifold seals for Big Twin and Sportster® models with CV carbs from 1991 thru 2006 (pack of 10).54422 Replaces OEM 27002-89 . . . . . . $37.99

Stainless Steel Aircraft-Style Intake ClampsImproved by reducing the T-bolt diameter size and bending it to conform to the clamp’s contour, making it easier to install. Includes manifold seals and self-locking nuts. Sold in pairs.11099 Fit Shovelhead, Sportster® and

Panhead models from 1955-early 1978 . . . . . . . . . . . . . . . .$15.99

11098 Fit Shovelhead and Sportster® models from late 1978 thru 1985 . . . . . . .$15.99

Intake Manifold SealsO-ring style for Shovelhead, Panhead and Sportster® intake manifolds from 1955-early 1978. Pack of 10.12085 Replaces OEM 27060-55. . . . . . . . . .$4.99

Rubber band style for Shovelhead and Sportster® models from 1978 thru 1985. Pack of 10.25102 Replaces OEM 27062-78. . . . . . . . .$17.99

Late Chrome Intake ClampsSpring steel clamp assemblies complete with late-style rubber band manifold seals. Fit Sportster® and Shovelhead models from late 1978 thru 1985. Sold in pairs.11251 Replaces OEMs 27063-78,

27063-80 . . . . . . . . . . . . . . . . . . . . . .$15.99

Intake Manifold SealsRubber band style for Shovelhead and Sportster® models from 1978 thru 1985. Pack of 10.25102 Replaces OEM 27062-78 . . . . . . $17.99

Spigot-Style AdaptorsStraight-thru and stepped spigot-style mani-fold adaptors. Double internal lip ensures an air tight seal while a thick 1/4"-wall and full 3/8"-thick center section provide a strong, stable mounting.17390 Stepped manifold adapter for use with

36-38mm spigot-style carbs. . . . . . . .$10.99

17391 Straight-thru manifold adapter for use with 40-44mm spigot-style carbs . .$10.99

Compliance FittingsReplacement compliance fittings with extra-thick flanges to eliminate leakage at the head surface. Fit Evolution® Big Twin models from 1984 thru 1989. Sold in pairs.17396 Replaces OEMs 27008-83A,

27012-83A . . . . . . . . . . . . . . . . . . . . .$22.99

Intake Seal KitThis kit contains the parts necessary to reseal the intake manifold on Big Twins from 1990 to present and Sportster® models from 1988 to 2007.091016 Kits sold in packs of 5 (repl. OEM

26995-86A and 27002-89). . . . . $16.99

Early Chrome Intake ClampsSpring steel clamp assemblies complete with early-style O-ring manifold seals. Fits Shovelhead, Sportster® and Panhead models from 1955-early 1978.Sold in pairs11250 Intake Clamps. . . . . . . . . . . . . . . . $12.99

Intake Manifold SealsO-ring style for Shovelhead, Panhead and Sportster® intake manifolds from 1955-early 1978. Pack of 10.12085 Replaces OEM 27060-55 . . . . . . . $4.99

INTAKE MANIFOLD PARTS

ntake Seals for Sportster®rr Mode

inless Steel craft-Style Intake Clamps



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

040333

040332

S&S Intake ManifoldsGenuine S&S, single throat, intake mani-folds for Big Twins 1966 to present and Sportsters® 1957-1985. Compatible with Bendix, Keihin, Tillotson and S&S including “E” model carbs with throats up to 17/8". Available for O-ring or rubberband heads with stock length cylinders.040332 Fits Big Twins from 1966-early

1978 and Sportster® models from 1957-early 1978 with O-ring style heads. . . . . . . . . . . . . . . . . . . $69.99

040333 Fits Big Twin Shovelheads from late 1978 thru 1984 and Sportster® mod-els from late 1978 thru 1985 with rubber band-style heads . . . . . . $69.99

Manifold Adapter KitThese adapters allow almost any possible combination of early (O-ring) or late (rubber-band) manifolds and heads to be converted to the superior sealing 1978-1985 style rub-berband intake seals and clamps. Kit includes 4 standard adapters and 2 stroker adapters. Standard adapters also work great on dam-aged O-ring style heads or cylinders. Stroker adapters convert most O-ring manifolds to stroker length.040351 Adapter kit . . . . . . . . . . . . . . . . . . . $5.49Note: Manifold not included.

S&S Manifold Conversion KitThis kit replaces the troublesome rubber compliance fittings with a rigid mount, alumi-num intake manifold. Designed for use with 17/8" or smaller diameter carbs, these kits will accept S&S, Bendix, Keihin (except CV) and many other aftermarket units with 2-bolt pat-tern. Kit includes aluminum manifold, mount-ing flanges, seals and spacers.260092 Fits Evolution® Sportster® models

from 1986 thru 2003 . . . . . . . . . $84.99

Billet Flange Manifold AdapterThis adapter allows the use of a Mikuni HSR42 or late model Keihin CV carburetor on a Shovel-head, Panhead, Sportster®, or early Evolution® model with 2-bolt flange manifold. Each unit is CNC-machined from billet aluminum. Sold each040324 Flange Manifold Adapter. . . . . $31.99

S&S Carburetor Spacer BlockA 1"-thick alloy spacer for use with 17/8"-bore flange mount carburetors like S&S, RevTech, some QwikSilver carbs, and others. Useful for clearance with large gas tanks. Sold each45749 Carb Spacer Block . . . . . . . . . . . . $33.99

Panhead Intake ManifoldExternally-polished 38mm flange-style manifold is 41/4"-long. When combined with CCI #17372 flange-style adapter, it will accept spigot-style carburetors, or by simply drilling the flange holes out with an 11/32" drill, it accepts flange-style carburetors with 23/4" center-to-center distance. Additional spacing for flange-style carbs may be acquired by using a CCI #17375 insulated spacer.18825 Sold each . . . . . . . . . . . . . . . . . . . . $29.99

Vulcan Engineering S&S1” & 3/8” Carb SpacersBillet Aluminum, O-ringed Groved Works with 5 & 6 Gallon Fat Bobs668158 1” Super B&E . . . . . . . . . . . . . . . . $32.99

668159 1” Super G. . . . . . . . . . . . . . . . . . . $32.99

668160 1” Super D. . . . . . . . . . . . . . . . . . . $38.99

668161 3/8”Super B&E . . . . . . . . . . . . . . . $32.99

V l E i i S&S

Vulcan Engineering MikuniHi-Flo Carb Back ManifoldsPrecision Machined bore. Tappers from Mikuni outlet diameter to S&S manifold inlet size. Substantial flow increase using S&S’s larger plenum intake manifold. Ideal for stroker & big bore motors that require odd length intake manifolds. Includes O-ring & metric hardware. Sold each

Mikuni to S&S668153 HSR-42 B&E manifold. . . . . . . . . . . $99.99

668154 HSR-45 B&E manifold. . . . . . . . . . . $99.99

668155 HSR-45 G manifold . . . . . . . . . . . . . $99.99

668156 HSR-48 G manifold . . . . . . . . . . . . . $99.99

668157 HSR-48 B&E manifold. . . . . . . . . . $114.99

ulcan Engineering Mikuni

INTAKE MANIFOLDS

040333

040332

M if ld Ad t Kit

8.24

EFI, ca

rburet

or & i

ntake

8

268071

Fuel Inlet Fittings for Keihin CarburetorsStock type replacement fuel inlet fitting. Presses into the carburetor body. Sold each 268071 Fits 4-speed Big Twins from 1979

thru 1980; Sportster® models from late 1976 thru 1980 and 1983 thru 1987 (repl. OEM 27594-76). . . . . $9.99

268072 Fits Big Twin models from 1976 thru 1978 and 1981 to present; Sportster® models from 1981 thru 1982 and 1988 thru 2003 (repl. OEM 27371-76). . . . . . . . . . . . . . . . $9.99

Sockethead Float Bowl Screws for Keihin CarbsThis part will improve the stock Keihin car-buretor (except CV type) on all models from 1976 thru 1989. Includes a hex wrench.15913 Sockethead Float Bowl Screws

Replaces OEM 27350-93T . . . . . . $3.99Manifold Spacer for Flange-Mount Carbs7/16"-thick insulating spacer with gaskets for all carbs having 23/4" center-to-center stud mounting. Original Equipment on Bendix and Keihin carbs from 1978 thru 1989 to prevent engine heat from being transferred to the carburetor. Replaces OEMs 29250-78A and 27077-78.17375 Manifold Spacer Sold each. . . . . $5.99

‘VOES’ SwitchesThese are Original Equipment parts. Replace-ment vacuum operated electric switches.75295 Fits Softail®, FXR and Dyna Glide®

models from 1991 thru 1995 (repl. OEM 26566-91) . . . . . . . . . $64.99

75294 Fits Softail® and 4-speed FX models from 1984 thru 1990 and Sportster® models from 1986 thru 1993 (repl. OEM 26558-84) . . . . . . . . . $89.99

75293 Fits all FXR models from 1984 thru 1990 and Sportster® models from 1983 thru 1985 (repl. OEM 26557-83) . . . . . . . . . $64.99

Cable BlocksAttaches inner cable to the carburetor on all models thru 1970. Includes screw and cotter key.20068 Cable Blocks - Card of five . . . . $19.99

INTAKE PARTS

Chrome Manifold Flange KitFits Big Twin models from 1990 thru 2005 and Sportster® models from 1986 thru 2003.260097 Chrome Manifold Flange Kit

Replaces OEMs 27009-86A and 27010-86A . . . . . . . . . . . . . . . . . . . $19.99

Intake Manifold FlangesFit Evolution® Sportster® models from 1986 thru 2003 and Big Twin models from 1990 thru 2005. Also fit RevTech® and S&S manifolds for Evolution® models.59432 Front and rear (sold in pairs) . . . $6.99

59430 Rear flange ONLY (replaces OEM 27010-86A) sold each. . . . . . . . . . $2.99

54150 Intake manifold seals (replaces OEM 26995-86A) pack of 10. . . . . . . . $17.99

Fuel Line SupportRoutes the fuel line between the cylinders. Chrome duplicate of the support on most models 1966 thru 1989. Installs on lower intake manifold flange bolt. Card of 10. Sold each.15895 Chrome Fuel Line Support

Replaces OEM 45092-66 . . . . . . . $9.99

hrome Manifold Flange Kit

268071



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

Rebuild Kits for Bendix/Zenith CarburetorsThe complete rebuild kits include an accelerator pump.15903 Bendix/Zenith kit (imported). . $19.99

24262 Bendix/Zenith kit (repl. OEM 27132-71T) . . . . . . . $39.99

26202 Imported accelerator pump only . . . . . . . . . . . . . . . . . . . . $9.99

Deluxe Rebuild Kit for Keihin CarburetorsAll the rubber components contained in thisexclusive 17-piece kit are molded from a ‘Viton’ material that resists swelling in all types of fuels including methanol and “oxy-genated” fuels. Even the float bowl O-rings don’t swell when removed.15915 Fits all Keihin carburetors (except

CV) from 1976 thru 1989 . . . . . $27.99

Rebuild Kit for Keihin CarbsThis 17-piece rebuild kit includes all the nec-essary parts required to rebuild any Keihin carburetor (except CV type), and is one of the most complete kits available today.15904 Fits all Keihin carburetors

(except ‘CV’ type) from 1976 thru 1989. . . . . . . . . . . . . . . $12.99

Rebuild Kit for Keihin ‘CV’ CarbsIncludes everything necessary to rebuild the Keihin constant velocity carburetors on all Big Twin and Sportster® models from 1988 to 200615799 Complete kit . . . . . . . . . . . . . . . . . $12.99

Motor Factory® Recalibration Kit for Keihin ‘CV’ CarburetorsCure the hesitation and surge with a C.C. Rider® tuning kit. Includes all needed jets, cali-brated drills, springs and full instructions to exorcise the gremlins in your carb.58896 Fits Sportster® and Big Twin models

with accelerator pump from 1989 to 2006 . . . . . . . . . . . . . . . . . $32.99

Motor Factory® ‘CV’ Carburetor Accelerator Pump UpgradeHelps increase fuel mileage after installation of a carburetor recalibration kit such as our CCI #58896.58898 Fits all Keihin CV carburetors from

1992 to 2006 . . . . . . . . . . . . . . . . . $14.99

High-Performance Tuning Kit for ‘CV’ CarburetorsThis precision carb re-calibration kit allows full range performance tuning without sacrificing reliability. Kit includes needles (early and late styles) with adjusting washers, main jets (150 thru 190), main jet holder, slide spring and instructions. Fits 1988 to 2006 Big Twin and Sportster® models with 40mm Keihin ‘CV’ carbs.040561 Complete kit . . . . . . . . . . . . . . . . . $17.99

Hi h P f T i Kit

REBUILD . RECALIBRATION KITS

27892-78

29058-77

27337-76or

27886-78

27385-76

27336-76

27358-76

27311-76 27324-83

27889-7827023-71

27077-78

27892-78or

27360-76

27360-76

27361-76

27362-76

Rebuild Kits for Keihin Carbs040550 Fits Sportster® models from 1976

thru 1978 and Big Twins from 1976-early 1978 . . . . . . . . . . . . . . . . . . . $10.99

040551 Fits Sportster® models from 1979 thru 1982 and Big Twins from late 1978 thru 1983. . . . . . . . . . . . . . . . $8.99

040552 Fits Keihin ‘CV’ type carburetors on Big Twin and Sportster® models from 1983 to 1987, Sportster with Keihin Butterfly carb also Big Twins from 1984 to 1989 . . . . . . . . . . . $12.99

8.26

EFI, ca

rburet

or & i

ntake

8

‘Yost’ Carburetor Power TubeThe ‘Power Tube’ from Yost Performance Products adds performance to S&S and Keihin carburetors. It works by atomizing the incoming fuel to a fine mist. The result is better combustion, crisper throttle response and a smoother running engine. The solid brass construction is compatible with all fuels and comes complete with easy-to-follow instructions.040540 Fits all S&S B, E and G

series carburetors . . . . . . . . . . . . $49.99

040541 Fits stock Keihin ‘CV’ carburetors on Big Twin models from 1990 thru 1995 and Sportster® models from 1988 thru 1995. . . . . . . . . . . . . . . $85.99

040542 Fits stock Keihin CV carburetors on all 1996-up models . . . . . . . . . . $109.99

‘Y t’ C b t P T b

040540

040541

Dynojet Tuner Kits for Keihin ‘CV’ CarburetorsEliminates flat spots in Keihin constant veloc-ity (CV) carburetors. Permits easy tuning of the carbs on stock motors as well as motors with performance cams and exhausts. Each kit includes instructions, a selection of main jets, a needle jet, an adjustable needle with spacers and circlips, a spring, and drill bits.615830 Fits Twin Cam 88® models

from 2000 to 2006 . . . . . . . . . . . $85.99

15798 Fits 1999 Twin Cam 88® models . . . . . . . . . . . . . . . . . . . . . . $85.99

15802 Fits Evolution® Sportster® and Big Twin models from 1996 to present (except 1998-up XL1200S models) . . . . . . . . . . . . . $96.99

15780 Fits Sportster® XL1200S Sport models from 1998 thru 2003 . . $85.99

24210 Fits Sportster® and Big Twin models with accelerator pump from 1989 thru 1995 . . . . . . . . . . . . . . . . . . . . $85.99

‘Thunderslide’ CV CarburetorRe-Calibration Kits by DynojetMuch more than just jets-–-the kit includes arevolutionary new lightweight slide designed to deliver instantaneous throttle response, precision control and increased fuel mileage. Includes everything you need: Thunderslide assembly, main jets, dia-phragm, fuel needle, Thunder Nozzle, check ball, emulsion tube, plug drill, retaining clips, hardware and instructions.615833 Fits Twin Cam 88® models from

2000 to 2006 . . . . . . . . . . . . . . . . $135.99

15797 Fits 1999 Twin Cam 88® models ONLY . . . . . . . . . . . . . . . $139.99

15800 Fits Evolution® Big Twin models from 1990 thru 1999 . . . . . . . . $139.99

15801 Fits Sportster® models from 1989 thru 1999 (except XL1200S Sport models) . . . . . . . . . . . . . . . $139.99

15781 Fits Sportster® XL1200S Sport models from 1998 thru 2003 . . . . . . . . $139.99

Dynojet Stage 7 ‘Thunderslide’ Kits for ‘CV’ Carburetors• Designed for 80+ horsepower engines and

include a taller carburetor top for more slide movement

• Made to optimize jetting for a given tuning specification or racing conditions

• Unique set of lift holes moderate how the slide moves with respect to throttle posi-tion; the faster the slide opens the quicker the throttle response

• Kits include Thunderslide, jets, needles, clips, carburetor top and all other necessary components for CV carbs

• Each Dynojet Jet Kit includes comprehen-sive instructions which show step-by-step installation and testing procedures to ensure a perfect setup every time

615834 Fits Evolution® Big Twin models from 1990 thru 1999 . . . . . . . . $149.99

615835 Fits 1999 Twin Cam 88® models ONLY . . . . . . . . . . . . . . . $149.99

615836 Fits Twin Cam 88® models from 2000 to 2006 . . . . . . . . . . . . . . . . $149.99

Andrews High-Flow Accelerator Pump Kit for Keihin CarburetorsImproves the performance of stock Keihin carburetors. Fits 1980 thru 1989 Big Twin and 1980 thru 1987 Sportster® models. Bolt-on extra power in 30 minutes by simply removing the float bowl, drilling one small hole in it, and installing this high performance accelera-tor pump body. Low and mid-range throttle response are noticeably increase.25186 Accelerator pump kit . . . . . . . . . $22.99

Billet Head Breather Kit by ForceBillet head breather kits for most models.040657 Fits all Evolution® Big Twin models

from 1993 thru 1999 . . . . . . . . $109.99

040658 Fits all Twin Cam 88® models from 1999 to 2007 . . . . . . . . . . . . . . . . $109.99

RECALIBRATION KITS



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

31515

Bracket and Breather Kits for ‘CV’ CarburetorsInstall aftermarket air cleaners on late model bikes with cylinder head crankcase breather systems. Kits include everything needed for the conversion except the air cleaner itself.31658 Fits 5-speed Evolution® Sportster®

models from 1991 thru 2003 . . $64.99

31659 Fits Evolution® Big Twin models from 1993 thru 1999 . . . . . . . . . $57.99

12012 Replacement breather filter . . $13.99

31657 Replacement banjo bolt (sold each) . . . . . . . . . . . . . . . . . . . . $6.99

Note: Brackets do not fit CCI #’s 12028 or 19030 7" round air cleaners.

E

k d h

Chrome Air Cleaner Support BracketsReplace the Original Equipment black plastic air boxes when installing custom air cleaners with flat backing plates, and are complete with gaskets and hardware.Note: Brackets do not fit CCI #’s 12028 or 19030 7" round air cleaners

17398 Fits Evolution® Big Twins from 1984 thru 1989 (repl. OEM 29116-83) . . . . . . . . . . . . . . $22.99

31515 Fits Evolution® Big Twins 1990 thru 1991 . . . . . . . . . . . . . . . . . . . . $29.99

31499 Fits Evolution® Big Twins from 1992 thru 1999 and Sportster® models from 1991 thru 2003 . . . . . . . . . $23.99

31514 Fits Sportster® models from 1988 thru 1990 . . . . . . . . . . . . . . . . . . . . $29.99

17398

Custom Air Cleaner BracesChrome support braces come with all necessary hardware.

For Stock CarburetorsFor Shovelhead Big Twins and Sportster® models with Bendix or Keihin carburetors.28117 Fits Sportster® models

from 1957 thru 1985 . . . . . . . . . . $7.99

28118 Fits all Shovelhead modelsfrom 1966 thru 1984 . . . . . . . . . . $7.99

For Teardrop Air CleanersRecommended when installing Teardrop air cleaners.19012 Fits Shovelheads

from 1966 thru 1984 . . . . . . . . . . $7.99 Breather Kits for Evolution® ModelsFits Big Twin models from 1993 thru 1999 and Sportster® models from 1991 thru 2003 when custom air cleaners or carburetors are installed. Accepts standard 3/8" rubber hose.040485 Breather Kits for Evo

Sold in pairs. . . . . . . . . . . . . . . . . . $19.99

Breather Kits for Custom Air CleanersRequired when installing custom air clean-ers or carburetors on Evolution® Sportster® engines with the crankcase vented through the cylinder head (replaces OEM 29281-91)040466 Fits Sportster® models from 1991

thru 2003 . . . . . . . . . . . . . . . . . . . . $29.99

Breather Kits

CARBURETOR SUPPORTS . ACCESSORIES

31761

CARBURETOR SUPPORTS

31515

17398

h Ki

8.28

EFI, ca

rburet

or & i

ntake

8

Motor Factory® Jet Assortment for S&S Carburetors• All jets are made of brass optimizing high

precision and flow-calibrated for extremely accurate fuel flow rate

• One of the most comprehensive jet kits on the market that contains 42 sets of jets

• Jet kit contains 2 each of the following intermediate jets, .025, .026, .028, .029, .031, .032, .033, .036, .040., and 2 each of the following main jets, .040, .042, .044, .046, .048, .050, .052, .054, .056, .058, .060, .062, .064, .066, .068, .070, .072, .074, .076, .078, .080, .082, .084, .086, .088, .090, .092, .094, .096, .098, .100, .102, .104

• Replacement jets are sold in packs of 5• Kit includes tray with part numbers of indi-

vidual jets for easy identification for re-ordering

640821 Jet kit (set of two trays) . . . . . $199.99

Motor Factory® Intermediate Jets for S&S CarburetorsFit ‘Super G’, ‘Super E’, and ‘Super B’ carbure-tors (sold in packs of 5).. . . . . . . . . . . . . . . . . $21.99

640822 .025640823 .026640824 .028640825 .029640826 .031

640827 .032640828 .033640829 .036640830 .040

Motor Factory® Main Jets for S&S CarburetorsFit ‘Super G’, ‘Super E’, and ‘Super B’ carbure-tors (sold in packs of 5).. . . . . . . . . . . . . . . . . . $8.99

640831 .040640832 .042640833 .044640834 .046640835 .048640836 .050640837 .052640838 .054640839 .056640840 .058640841 .060640842 .062640843 .064640844 .066640845 .068640846 .070640847 .072

640848 .074640849 .076640850 .078640851 .080640852 .082640853 .084640854 .086640855 .088640856 .090640857 .092640858 .094640859 .096640860 .098640861 .100640862 .102640863 .104

Motor Factory® Jet Assortment for Keihin ‘Butterfly’ Carburetors• All jets are made of brass optimizing high



• Jet kit contains 2 each of the following slow jets, #.50, #.52, #.54, #.56, #.58, #.60, #.62, #.65, #.68, #.70, #.72, #.74, #.75, #.80, #.88, #1.00 and 2 each of main jets, #165, #170, #175, #180

• Replacement jets are sold in packs of 5• Kit includes tray with part numbers of

individual jets for easy identification for re-ordering

640800 Jet kit (sold with tray) . . . . . . . $109.99

Motor Factory® Slow Jets for Keihin ‘Butterfly' CarburetorsFit Big Twin models from 1976 thru 1989, and Sportster® models from 1976 thru 1987 (sold in packs of 5). . . . . . . . . . . . . . . . . . . . . . $13.99

640801 #0.50640802 #0.52 (repl. OEM 27329-83)640803 #0.54640804 #0.56640805 #0.58640806 #0.60640807 #0.62640808 #0.65 (repl. OEM 27896-79)640809 #0.68 (repl. OEM 27894-78)640810 #0.70 (repl. OEM 27895-78)640811 #0.72 (repl. OEM 27897-78)640812 #0.74640813 #0.75640814 #0.80640815 #0.88 (repl. OEM 27348-77)640816 #1.00 (repl. OEM 27348-76)

Motor Factory® Main Jets for Keihin ‘Butterfly' CarburetorsFit Big Twin models from 1976 thru 1989, and Sportster® models from 1976 thru 1987 (sold in packs of 5). . . . . . . . . . . . . . . . . . . . . . . $8.99

640817 #165 (repl. OEM 27419-76)640818 #170 (repl. OEM 27418-76)640819 #175 (repl. OEM 27417-76)640820 #180 (repl. OEM 27416-76)

S&S ‘Super’ CarbsIntermediate Jets

Keihin ‘CV’ Slow Jets

Keihin ‘CV’ Main Jets

Keihin ‘Butterfly’ Main Jets

MOTOR FACTORY JET KITS


Motor Factory® Jet Assortment for Keihin ‘CV’ Carburetors• All jets are made of brass optimizing high



• Jet kit contains 2 each of the following slow jets, #040, #042, #044, #045, #046, #048, #050, #052, #054, and 2 each of the following main jets, #140, #145, #150, #155, #160, #165, #170, #175, #180, #185, #190, #195, #200, #205.



640750 Jet kit (sold with tray) . . . . . . . . $92.99

Motor Factory® Slow Jets for Keihin ‘CV’ CarburetorsFit Big Twin models from 1990 to present, and Sportster® models from 1988 to present (sold in packs of 5). . . . . . . . . . . . . . . . . . . . . . $13.99

640751 #040 (repl. OEM 27218-92)640752 #042 (repl. OEM 27171-89)640753 #044640754 #045 (repl. OEM 27170-89)640755 #046640756 #048 (repl. OEM 27165-90)640757 #050640758 #052640759 #054

Motor Factory® Main Jets for Keihin ‘CV’ CarburetorsFit Big Twin models from 1990 to present, and Sportster® models from 1988 to present (sold in packs of 5). . . . . . . . . . . . . . . . . . . . . . . $7.99

640760 #140640761 #145640762 #150640763 #155 (repl. OEM 27154-89)640764 #160 (repl. OEM 27152-89)640765 #165 (repl. OEM 27116-88)640766 #170 (repl. OEM 27125-88)640767 #175 (repl. OEM 27090-89)640768 #180 (repl. OEM 27243-95)640769 #185 (repl. OEM 27185-90)640770 #190640771 #195640772 #200 (repl. OEM 27105-88)640773 #205


TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

Motor Factory® Jet Assortment for Mikuni ‘Smoothbore’ Carbs• All jets are made of brass optimizing high



• Jet kit contains 2 each of the following main jets, #100, #110, #120, #130, #135, #140, #145, #150, #152.5, #155, #157.5, #160, #162.5, #165, #167.5, #170, #172.5, #175, #177.5, #180, #185, #190, #195, #200



640774 Jet kit (sold with tray) . . . . . . . . $85.99

Motor Factory® Main Jets for Mikuni ‘Smoothbore’ CarburetorsFit Mikuni HSR42, HSR45 and HS40 carburetors (sold in packs of 5). . . . . . . . . . . . . . . . . . . . . . . $7.49

640775 #100640776 #110640777 #120640778 #130640779 #135640780 #140640781 #145640782 #147.5640783 #150640784 #152.5640785 #155640786 #157.5640787 #160

640788 #162.5640789 #165640790 #167.5640791 #170640792 #172.5640793 #175640794 #177.5640795 #180640796 #185640797 #190640798 #195640799 #200-

59215

59219

RevTech® Hop-Up Kits for ‘CV’ CarburetorsHigh-performance hop-up kit unleashes the horsepower potential of a stock motor by allowing it to breath freely. Kit includes washable free-flowing air filter, head breather adapter, C.C. Rider® CV carb recalibration kit and all hardware. Fits Evolution® Big Twin models with CV carburetors from 1990 thru 1999.

RevTech® Free Flow Air Filter KitKit contains washable high flow filter, spacers, brackets and hardware. Fits Evolution® Big Twins with CV carburetors from 1990 thru 1999.59215 Replaces OEM 29008-90A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $56.99

RevTech® Universal Head Breather AdapterBreather adapter permits installation of CCI #59215 or Screamin‘ Eagle® air filter kits on Evolution® Big Twin models with CV carburetors from 1993 thru 1999. Can also be used to install universal air cleaners on Big Twins with breather heads. Includes hose, banjo fittings, brackets and hardware.59219 Breather kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $33.99

Thunder Jet™ KitsPatented third fuel circuit has a built-in air correction system that permanently solves the problem of poor mid-range performance or a too-lean condition on the top end. It operates over a wide range of altitude and atmospheric conditions.Note: Legal in California only for racing vehicles which may never be used upon a highway.

Thunder Jet™ for S&S, Bendix and Keihin CarburetorsMay be installed on all S&S Super ‘B and E’ models as well as Bendix/Zenith and Keihin (except CV) carburetors.14765 Red anodized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99

14766 Blue anodized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99

14767 Black anodized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$55.99

614767 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.99

Thunder Jet™ for Keihin CV CarburetorsMay be installed on all Keihin 40mm and 44mm CV carburetors.614772 Black anodized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

614773 Blue anodized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

614774 Red anodized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69.99

614775 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$77.99

Thunder Pro™ for S&S CarburetorsDelivers more fuel than the Thunder Jet. Designed for big inch engines. May be installed on all S&S Super ‘D and G’ carburetors.614768 Black anodized. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

614769 Blue anodized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

614770 Red anodized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

614771 Polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$65.99

JET KITS . AIR FILTER HOP UP KITS

8.30

EFI, ca

rburet

or & i

ntake

8

Motor Factory® Air Filter ElementsFit Original Equipment and S&S air cleaner housings. Superior filtration through a unique open-cell polyurethane foam for greater air flow and improved dirt holding capacity.Air Filter Element . . . . . . from $17.99 to $24.99

K&N Replacement Air FiltersThese world renowned filters combine unsurpassed air flow and dirt-trapping performance. Made with pleated gauze and designed to be washed and reused twenty five of times. Use the K&N Recharger kit to keep performance going virtually forever.. . . . . . . . . . . . . . . . from $34.99 to $82.99

22169

Description Replaces OEM# Motor Factory® K&N

Fits Sportster® models from 1966-early 1973 and from 1983 thru 1985; FL and FX models from 1967-early 1975 (2 5/8"-wide elements) 29036-72 11900 12007

Fits Sportster® models from late 1973-early 1975; FL and FX models from late 1975 thru 1976 (3"-wide elements) 29086-73 11901 25562

Fits most Twins from 1941 thru 1966 (21/2"-wide elements) 29036-41 11902 25561

Fits Sportster® models from late 1975 thru 1978; FL and FX models from 1977-early 1978 29086-75 11903 19881

Fits the ‘ham can’ air cleaners on Sportster® models from 1979 thru 1982; FL and FX models (except FXST) from late 1978 thru 1984; FXR models from 1982 thru 1983; FLT models from 1980 thru 1982 (31/2"-wide elements)

29255-78 11903 25563

Fits the ‘ham can’ air cleaners on FLT/FLHT models from 1983 thru 1985 (27/8"-wide elements) 29288-83 11908 n/a

Fits Evolution® Sportster® models from 1986 thru 1987 29036-86 11905 25565

Fits Evolution® Sportster® models from 1988 thru 2003 29036-88B, 29331-96 11909 25595

Fits Evolution® Sportster® models from 2004 thru 2008 29331-04 611506 629270

Fits the round air cleaners on Evolution® Big Twins from 1984 thru 1985 29259-83A 11906 25564

Fits Evolution® Big Twin models from 1986 thru 1989 29259-86 11907 25566

Fits Evolution® Big Twin models with carburetors from 1995 thru 1999 29259-89, 29259-91A, 29330-96 11899 25619

Fits Evolution® Big Twin models with carburetors from 1993 thru 1999 29259-93 11959 25619

Fits Evolution® Big Twin models with fuel injection from 1995 thru 1998 29291-95 611502 25215

Fits all Twin Cam 88® models with carburetors from 1999 thru 2006. Also fits all fuel-injected Softail® models 2001 to present and all models with Delphi® fuel injection from 2002 thru 2007 29461-99 611500 11997

Fits Twin Cam 88® FLT, FLHT, and Road King® models with Magneti Marelli fuel injection from 1999 thru 2001 29462-99 611501 11998

Fits Evolution® Sportster® models from 1995 thru 2003 and Big Twin models from 1995 thru 1999 (International models ONLY) 29325-95A n/a 25556

Fits all Buell® models with carburetors (except Blast® models) from 1996 thru 2000 29239-96Y 611504 22165

Fits all Buell® Blast® models from 2000 thru 2007 n/a 22169

Fits Buell® XB9S, XB12S, XB9R and XB12R models from 2002 thru 2007 n/a 5560005

Fits V-Rod® models from 2002 to present 29437-01 611505 5560004

Fits most dual carburetor aftermarket air cleaner assemblies (2.75"-tall x 7"-long x 4.5"-wide) n/a n/a 5560003

Fits early Screamin’ Eagle® high-flow air filter kits for EVO Air Cleaners (has integral backing plate) Replacement air cleaner for Screamin Eagle elements 29055-89 611503 25022

Fits late Screamin’ Eagle® high-flow air filter kits - Tapered for Twin Cam air cleaners29442-99D, 29442-99C, 29442-99B, 29442-99A

611507 629272

Fits S&S air cleaners (except Super ‘E’ and ‘G’) and 7" teardrop air cleaners n/a 11904 25567

Fits all S&S Super ‘E’ and Super ‘G’ (shorty) air cleaners n/a 11898 15924

Fits Twin Cam™ Touring models 2008 to present. 29633-08 611508 629274

Fits Sceamin Eagle® tapered air fliter element for Touring models 2008 to present 29244-08 611509 629275

Fits Twin Cam™ Dyna Glide models 2008 to present. 29191-08 n/a 629276

12007

A IR FILTERS



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

11900 11901 11902 11903

11904

11905

11906 11907

11908

11909 611506 11899 11959

611502 611500 611501 611504 611505

611503 611507 11898 611508 611509

11997

25562 25565

25595 629270

25215

5560005 5560004 25022

2561925564 25566

25561

25556

19881

5560003 629272

25567 15924

25563

629274 629275 629276

2216511998

AIR FILTERS

8.32

EFI, ca

rburet

or & i

ntake

8

K&N Air Filters for RevTech® EnginesSpecifically-designed for the early and late-style air cleaner housings on all RevTech® 88" and 100" engines. Sold each.25022 Fits early-style RevTech® engine

air cleaner housings as well as Screamin’ Eagle® high-flow air filter kits for Big Twin models (repl. OEM 29055-89) . . . . . . . . . $52.99

25023 Fits late-style RevTech® engine air cleaner housings . . . . . . . . . . $39.99

25022

25023

K&N 5" Round Air Cleaners12010 Fits 36-38mm Mikuni carb (27/16" I.D.

mounting flange) . . . . . . . . . . . . $53.99

12011 Fits 40-44mm Mikuni and 38-40mm Lectron® carbs (23/4" flange) . . $56.99

19020 Fits Keihin/Andrews flowmaster carb (25/8" mounting flange) . . . . . . $49.99

25560 Fits 51/2" diameter S&S (except Super ‘E’ and ‘G’) and Keihin (except CV type) carbs . . . . . . . . $64.99

19018 51/2" replacement element . . . $37.99

25560

S&S High-Flow Air Filter and Adapter KitThe new S&S high-flow filter is 1"-taller than their standard filter and features a low-restriction, pre-oiled filter element. The low-restriction element, combined with the larger surface area provided by the 1"-taller filter, adds up to an airflow increase of 37% percent over the standard S&S filter – the ultimate free breathing set-up for your engine! The filter and filter adapters extend the teardrop housing out 1". The resulting band of exposed filter peeking out from under the teardrop imparts a high-performance street racer look. Kit installs in minutes, and no permanent modifications are required. It fits all “Super E” and “Super G” carburetors (except when installed on Buell® models).601798 Air filter and adapter kit. . . . . . $46.99

601799 Replacement filter . . . . . . . . . . . $17.99

Uni Filter Service KitUni Filter Service Kit comes with Uni’s special-ly designed spray oil and cleaner. Designed to work together… it’s the easiest filter cleaning kit available. For use on all foam air filters.5574001 Service kit. . . . . . . . . . . . . . . . . . . . $12.99

Uni Filter CleanerWorks great on all Original Equipment and performance air filters. Spray it on, let it soak, rinse! Biodegradable.5571639 16 oz. aerosol can (sold each) . . $8.49

Uni Filter OilSpecifically designed for foam air filters. Resists drain-off and traps dirt particles, pro-viding extreme filtration efficiency.5571508 5.5 oz. aerosol can

(sold each). . . . . . . . . . . . . . . . . . . . $6.99

5571510 16 oz. liquid (sold each) . . . . . . . $6.99

High-Performance Air Filter for V-Rod® Models by ForceWashable, reusable high performance replacement air filter from the tuning experts at Force.681043 Fits all V-Rod® models from

2002 to 2007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99

K&N Recharger Filter Care KitsA six-step maintenance system designed to recharge any K&N Filtercharger® air filter. Completely restores air flow efficiency so your Filtercharger® performs like new! Available in two different kits for those who have a pref-erence: one with an aerosol can of oil, and one with a squeeze bottle of oil. Sold each.5561123 Aerosol kit . . . . . . . . . . . . . . . . . . . $13.99

5561125 Squeeze bottle kit. . . . . . . . . . . . $13.99

K&N Filter Cleaner and Degreaser5562931 12 oz. squirt bottle

(sold each) . . . . . . . . . . . . . . . . . . . . $8.99

5561982 32 oz. squirt bottle (sold each) . . . . . . . . . . . . . . . . . . . $12.99

5562935 1 gallon refill (sold each) . . . . . $32.99

K&N Filter Oil5561966 6 oz. aerosol can (sold each) . . . $7.99

5561973 12 oz. aerosol can (sold each) . . $8.99

5561974 8 oz. squeeze bottle (sold each) . . . . . . . . . . . . . . . . . . . . $5.99

5562927 1 gallon refill (sold each) . . . . . $32.99

AIR FILTERS · CLEANERS

K&N® Air Filter Kit for Twin Cam 88® EnginesBuilt around the legendary K&N high-flow air filter, this assembly includes an innovative powder-coated billet aluminum backplate that eliminates external breathers, and features a built-in, dyno-tuned velocity stack. The result is a significant airflow increase to the engine without sacrificing filtration. It retains a stock appearance by re-using the Original Equipment air cleaner cover, yet boasts superior filtration and performance with a K&N laser-etched beauty ring.629271 Fits all Twin Cam 88® engines

from 1999 to present (exceptthose with Magneti Marelli fuel injection) . . . . . . . . . . . . . . . $167.99

629272 Replacement air cleaner for Screamin’ Eagle® elements (OEMs 29442-99A, B, C and D) . . . . . . . . . . . . . . . . . . . . . . . $53.99

CARB Compliant

2556



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

FORCEWINDER A IR CLEANERS

040660

Forcewinder XR Air Intake SystemThe Forcewinder is a bold design in air filtration that looks racy and gives the rider more leg clearance than conventional style air cleaners. The Forcewinder features a high-efficiency, long-lasting, washable K&N air filter element with a chrome end cap. The kit includes K&N air filter, fine mesh sock air filter cover (for wet weather use), polished, black or white elbow, and a small K&N breather for the end of a case breather hose. This kit does not come with a carburetor support or head breather kit. The Forcewinder is shown in the forward position, but can be mounted in the upright position when using 3.5 gallon Fat Bob gas tanks or smaller custom tanks.

47717

Fits Big Twin Models from 1990 to Present and Sportster® Models from 1988 thru 2003 using 40mm CV Carburetors47717 Polished elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$229.99

040655 Gloss Black elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$269.99

Chrome Carburetor Support Bracket647405 Fits Big Twin models from 1993 to present. . . . . . . . . . . . . . . .$55.99

Forcewinder XR2 Air Intake SystemAll the features of the regular Forcewinder XR, with the added benefit of a head breather kit. Available with polished, or black elbow.

For carbureted Evolution® Big Twins from 1992 thru 1999040660 Polished elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $339.99

040661 Gloss Black elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $399.99

Chrome Carburetor Support Bracket647405 Fits Big Twin models from 1993 to present. . . . . . . . . . . . . . . $55.99

For all carbureted Twin Cam 88® Models from 1999 to Present, FXST FI Models from 2001 to Present, and FI Touring Models from 2002 to Present47965 Polished elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $349.99

040666 Gloss Black elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $399.99

Chrome Carburetor Support Bracket647405 Fits Big Twin models from 1993 to present. . . . . . . . . . . . . . . $55.99

For Sportster® Models from 1991 thru 2003647400 Polished elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $349.99

Chrome Carburetor Support Bracket647406 Fits Sportster® models from 1991 thru 2003. . . . . . . . . . . . . . $55.99

Accessories by Forcewinder47967 Adapter ring for S&S ‘E’ & ‘G’ carburetors on Evolution®

Big Twin or Sportster® models. Horizontally-mounted air filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $41.99

681042 Polished billet adapter ring for S&S ‘E’ & ‘G’ carburetors on Evolution® Big Twin or Sportster® models. Horizontally-mounted air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $64.99

647402 Adapter ring for Mikuni carburetors on Evolution® Big Twin and Sportster® models. Horizontally-mounted air filter. . . $39.99

681041 Polished billet adapter Ring. Fits Mikuni carburetors on Evolution® Big Twin and Sportster® models. Horizontally-mounted air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $64.99

681040 Polished billet Forcewinder vertical adapter . . . . . . . . . . . . . $64.99

040201 Replacement K&N filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79.99

47966 Gaskets for use with adapter plate when used with S&S ‘E’ and ‘G’ carburetors (pack of 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99

Forcewinder Dry ChargerThe Forcewinder Dry Charger acts as a prefilter protecting your air filter in espe-cially dusty conditions. Available in three great colors. 681028 Force Dry Charger Sock

Blue . . . . . . . . . . . . . . . . . . . . . . . $35.99

681030 Force Dry Charger Sock Purple . . . . . . . . . . . . . . . . . . . . . $35.99

681031 Force Dry Charger Sock Red. . . . . . . . . . . . . . . . . . . . . . . . $35.99

8.34

EFI, ca

rburet

or & i

ntake

8

ARLEN NESS . AIR FILTER KITSU.S. Patent

#6,374,815 B1

Stage II ‘Billet Sucker’ Air Cleaner Kits by Ness®

• Chrome billet outer cover available in three styles• Higher performance air filter flows 20% more that stage I version• All-in-one aluminum backing plate features built-in carb support• Breather tunnels at each head to decrease crankcase pressure• Includes the billet cover, backing plate, high-flow air filter, four

chrome banjo bolts, and all necessary hardwareFits all Touring Models from 2008 to present631175 Smooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $224.99

631178 Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $224.99

631177 Scalloped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $224.99

Fits all Big Twin Models from 2000 thru 2008 (except Fuel Injected FLT Models from 2000 thru 2001 and 2008 Touring Models)650423 Smooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $241.99

650425 Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $241.99

650424 Scalloped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $241.99

Fits all Big Twin Models from 1993 thru 2005 (except Fuel Injected Touring Models from 1995 thru 2001)04936 Smooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $226.99

04937 Grooved (shown). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $226.99

650414 Scalloped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $235.99

Fits Touring Models with Magnetti Marelli FI from 1995 thru 2001650403 Smooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $220.99

650402 Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $220.99

650413 Scalloped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $225.99

Stage I ‘Big Sucker’ Air Filter Kit by Ness®

• All-in-one aluminum backing plate features built-in carb support

• Breather tunnels at each head to decrease crankcase pressure• Accepts all oval or round Original Equipment outer air cleaner covers• Includes the backing plate, high-flow air filter, four chrome banjo

bolts, and all necessary hardware

Kits with Satin Backing Plate650417 Fits all carb and fuel injected models from 2000 thru 2008

(except 2008 Touring models). . . . . . . . . . . . . . . . . . . . . . . . . . .$131.99

04967 Fits all Big Twins from 1993 thru 2005 (except fuel injected Touring models from 1995 thru 2001) . . . . . . . . . . . . . . . . . . .$137.99

650401 Fits fuel injected Touring models from 1999 thru 2001 . . .$137.99

650408 Fits Sportster® models from 1988 thru 2008. . . . . . . . . . . . . .$129.99

618510 Fits 2008 FLT model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$130.99

Kit with Chrome Backing Plate650419 Fits all carb and fuel injected models from 2000 thru

2008 (except fuel injected FLT models 2000 thru 2001 and 2008 Touring models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$151.99

650399 Fits all carb and fuel injected Softail models from 1993 thru 2005 (Except 1996 thru 1999 fuel injected FLT Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$150.99

Kit with Chrome Backing Plate (continued)650398 Fits all Twin Cam FLT injected models from 1999

thru 2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$155.99

618512 Fits 2008 FLT model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$144.99

Replacement Parts and Accessories650405 Replacement air filter for CCI #’s 04967 and 650408 . . . . . . .$52.99

631183 Replacement Stage 1 air filter for 2008 FLT kits . . . . . . . . . . .$48.99

650404 Replacement air filter for CCI #650401 . . . . . . . . . . . . . . . . . . .$51.99

650415 Scalloped Ness® air filter cover . . . . . . . . . . . . . . . . . . . . . . . . . .$125.99Note: These kits do not fit engines equipped with the 103" Screamin’ Eagle® kit.

Fits Sportster® Models from 1986 thru 2008650411 Smooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $220.99

650410 Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $220.99

650412 Scalloped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $225.99

Replacement Parts650406 Stage II air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $54.99

631184 Stage II air filter for 2008 FLT kits . . . . . . . . . . . . . . . . . . . . . . . $54.99

631181 Smooth round billet air cleaner cover . . . . . . . . . . . . . . . . . . $119.99

631182 Grooved round billet air cleaner cover . . . . . . . . . . . . . . . . . $119.99

650415 Scalloped Ness® air filter cover . . . . . . . . . . . . . . . . . . . . . . . . . $125.99Note: These kits do not fit engines equipped with the 103" Screamin’ Eagle® kit.



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

‘Cheap-Sucker’ Air Cleaner Kits by Ness®

• If you are looking for performance and you are not concerned about hidden hoses and billet covers, these kits are the right choice for your bike.• Each ‘Cheap-Sucker’ kit features a steel backing plate that is integrated into the air filter element so no additional backing plate is needed.• These kits utilize the factory breather hoses and hardware and accept the factory air cleaner cover.631168 Fits all carb and fuel injected models from 2000 thru 2008

(except 2008 Touring models). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.99

631169 Fits all 2008 Touring models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.99

ARLEN NESS . AIR FILTER KITS

631168

U.S. Patent#6,374,815 B1

Stage II ‘Big Sucker’ Air Filter Kit by Ness®

• Higher performance set-up flows 20% more air than the Stage 1 ‘Big Sucker’ through the larger filter

• All-in-one aluminum backing plate features built-in carb support• Breather tunnels at each head to decrease crankcase pressure

• Includes the backing plate, high-flow air filter, four chrome banjo bolts, and all necessary hardware

Note: These kits do not fit engines equipped with the 103" Screamin’ Eagle® kit. They also require the use of an 8"-round air filter cover which is standard on all 1992 thru 1999 Evolution® models.

Kits with Polished Backing Plate650418 Fits all Big Twins from 2000 thru 2008 (except 2008

Touring models). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142.99

04935 Fits all Big Twins from 1993 thru 2005 (except fuel injected Touring models from 1995 thru 2001) see important note above . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142.99

650400 Fits fuel injected Touring models from 1999 thru 2001 . . .$142.99

650409 Fits Sportster® models from 1988 thru 2008. . . . . . . . . . . . . .$140.99

618511 Fits 2008 FLT model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$140.99

Kit with Chrome Backing Plate650420 Fits all Big Twins from 2000 thru 2008 (except 2008 Touring

models). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$160.99

650397 Fits all carb and fuel injected Softail models 1993 thru 2005 (except 1996 thru 1999 fuel injected FLT models) . . . . . . . .$165.99

618513 Fits 2008 FLT model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$154.99

Replacement Parts650406 Replacement stage II air filter. . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.99

631184 Stage II air filter for 2008 FLT kits . . . . . . . . . . . . . . . . . . . . . . . .$54.99

8.36

EFI, ca

rburet

or & i

ntake

8

‘Twin Velocity Plus’ Air Cleaners by KüryAkyn™

KüryAkyn has completely revamped their Twin Velocity air cleaner from front-to-back to drastically improve performance! These kits feature chrome cases with chrome access covers and inner plates.

New features include:• Additional slots on both sides and enlarged openings at the bottom to

allow more air to enter the sides of the filter• End Breather Technology – a large, round foam filter element has been

added beneath the teardrop center cover to allow filtered air to enter the end of the filter

• The revised teardrop center cover provides larger slots for improved air flow and cleaner looks

• The internal crankcase vent system has been designed to direct gasses and oil droplets into the carburetor or induction module – helping to keep the mess in the engine

All these improvements add up to improved air flow and greatly improved power potential.600469 Fits Twin Cam 88® models with stock CV carburetors

from 1999 to present, and Delphi® fuel injection from 2001 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $229.99

‘Pro-R Hypercharger’ Air Cleaners by KüryAkyn™

This filter assembly is one of the best flowing on the market and is capa-ble of supplying enough air to even the highest output street motors. The frontal opening is huge, and the vacuum operated butterflies allow almost unrestricted airflow to the filter under high-load riding situations. Applications for CV carbs will bolt directly to stock 40mm or Screamin’ Eagle® 44mm CV carbs. Each kit comes complete with mount-ing hardware and a crankcase breather kit.600457 Fits Sportster® models with stock CV carburetors

from 1991 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $334.99

600458 Fits Evolution® Big Twins with stock CV carburetors from 1993 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $334.99

600459 Fits Twin Cam 88® models with stock CV carburetors from 1999 to present, and Delphi® fuel injection from 2006 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $322.99

600460 Fits Twin Cam 88® models with Delphi® fuel injection from 2001 thru 2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $322.99

Skull Air Cleaner Kits by KüryAkyn™

These new Skull air cleaner kits are a vile and sinister addition to any bad-ass ride. They come complete with a chrome cover, backing plate, high-flow filter element as well as any necessary brackets, crankcase breathers and hardware required for a quick installation.600490 Fits Twin Cam 88® models with CV carburetors or Delphi®

fuel injection from 1999 thru 2006 . . . . . . . . . . . . . . . . . . . . . $239.99

600491 Fits Big Twin models with CV carburetor from 1993 thru 1999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $239.99

Hi-Five Air Cleaner by KüryAkyn™

The Hi-Five’s five-spoke, tiered and slotted design makes it look and perform spectacularly. Stylized bosses with screws give a sturdy, heavy-duty appearance. Approximately seven inches in diameter and three inches thick, this unit packs a ton of performance into a relatively small package. Available in either a chrome or wrinkle black finish.

Chrome Finish600487 Fits Twin Cam 88® models with CV carburetors or Delphi® fuel

injection from 1999 thru 2007 . . . . . . . . . . . . . . . . . . . . . . . . . $229.99

KURYAKYN A IR CLEANERS



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

Pro-Series Hypercharger™ Air Cleaners by KüryAkyn™

This is it - the heavy artillery. The dyno and race track proven KüryAkyn™ Hypercharger on steroids. The Pro-Series Hypercharger is a totally new design. You’ll be able to spot this distinctive design a mile away. The body is now 1/2" wider and nicely contoured. Inner surfaces have been smoothed and relieved to work with the added air cleaner surface area for increased air flow and velocity. Fits stock or 44mm CV carburetors, and can easily adapted to Mikuni HSR 42/45 and S&S shortys.

Hypercharger with Chrome Butterflies686378 Fits all Evolution® Big Twin models with stock

CV carburetors from 1993 thru 1999 . . . . . . $289.99

686380 Fits all Twin Cam 88® models with ‘CV’ carburetors from 1999 to present . . . . . . . . . $289.99

Pro-Series Hypercharger AdaptorsUsed to install the Pro-Series Hypercharger air cleaners listed above on today’s most popular high-performance carburetors.48281 Fits Twin Cam 88® models with S&S

Super ‘E’ or ‘G’ carburetors . . . . . . . . . . . . . . . . $44.99

Hypercharger Crankcase Breather KitFits Sportster® models from 1991 thru 2003 and Evolution® Big Twin models from 1993 thru 1999 with Keihin CV or Mikuni HSR42 carburetors.48283 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31.99

Adjustable Enrichener for S&S CarburetorsFits S&S Super E or G carburetor using new style Hypercharger air cleaner.48280 Adjustable enrichener . . . . . . . . . . . . . . . . . . . . . $20.99

040045 Trap Door

040049Butterflies

Air Cleaner shown for reference only

KüryAkyn™ Replacement Trap Doors and ButterfliesReplacement trap door and butterflies fit all HyperCharger air cleaner kits. Replacement parts do not include air cleaner assembly as shown. Update your Hypercharger by adding some color!

Trap Door040042 Chrome. . . . . . . . . . . . .$20.99

040043 Black . . . . . . . . . . . . . . .$18.99

040044 Red. . . . . . . . . . . . . . . . .$18.99

040045 Blue . . . . . . . . . . . . . . . .$18.99

Butterflies040046 Chrome. . . . . . . . . . . . .$14.99

040047 Black . . . . . . . . . . . . . . .$14.99

040048 Red. . . . . . . . . . . . . . . . .$14.99

040049 Blue . . . . . . . . . . . . . . . .$14.99

Hypercharger™ Air Cleaners by KüryAkyn™

The newest version of this unique and popular high-performance air cleaner with ‘Blood Groove’ styling features functional automatic engine vac-uum-controlled butterfly valves with replaceable bearings. They feature a show-chrome body with chrome or black butterflies. Kits include necessary mounting hardware for stock CV carburetors and KüryAkyn™ crankcase breather.

Hypercharger with Chrome Butterflies48273 Fits Evolution® Big Twins with stock CV

carburetors from 1993 thru 1999. . $269.99

48275 Fits Sportster® models with stock CV car-buretors from 1991 to present . . . . $269.99

48277 Fits Twin Cam 88® models with stock CV carburetors from 1999 to present, and Delphi® fuel injection from 2006 to present . . . . . . . . . . . . . . . . . . . . . . . $259.99

600470 Fits Twin Cam 88® models with Delphi® fuel injection from 2001 thru 2005 . . . . . . . . . . . . . . . . . . . . . . . . $289.99

Hypercharger with Black Butterflies040033 Fits Evolution® Big Twins with stock CV

carburetors from 1993 thru 1999. . $269.99

Hypercharger AdaptorsUsed to install the Hypercharger air cleaners listed above on today’s most popular high-performance carburetors.48281 Fits Twin Cam 88® models with S&S

Super ‘E’ or ‘G’ carburetors . . . . . . . . $44.99

Hypercharger Crankcase Breather KitFits Sportster® models from 1991 thru 2003 and Evolution® Big Twins from 1993 thru 1999 with Keihin CV or Mikuni HSR42 carburetors.48283 Complete kit . . . . . . . . . . . . . . . . . . . . . . $31.99

Adjustable Enrichener for S&S CarburetorsFits S&S Super E or G carburetor using new style Hypercharger air cleaner.48280 Adjustable enrichener . . . . . . . . . . . . . $20.99

K&N Replacement Filter for Hypercharger48279 Fits all Hypercharger air cleaners . . . $44.99

KURYAKYN A IR CLEANER

48279

48280

ASGA

RATRCL& C

48281

48283

8.38

EFI, ca

rburet

or & i

ntake

8686653

686656

Billet ‘Hyper Force’ Multi-Plate Kit by PistorNo more leaking air cleaners with the innovative adaptor plate with an internal engine breather and without any hoses. But that’s not all, the ‘Multi Plate’ fits Keihin CV, Mikuni and S&S carbu-retors on Evolution® models from 1984 to present, carbureted Twin Cam 88® models from 1999 to 2006, EFI Twin Cam 88® models from 2001 to 2007, and all RevTech® engines (with adaptor). Also available for Evolution® Sportster® models. Different mounting holes allow the mounting of twisted intake manifolds from CV, S&S, ‘Hyper Force’, KüryAkyn ‘Hypercharger’ and ‘Forcewinder’ air cleaners. Includes all necessary hardware and gaskets. Available with polished, black or chrome finishes. Requires a spacer if equipped with a standard air cleaner in wide tank applications. EFI models must use CCI #686644.

Chrome Covers for EFI by PistorThis is the cover the factory forgot! Fills the gap between the air cleaner and the gas tank.Fits models with Delphi® fuel injection and all aftermarket air cleaners and Hyper Force Multi-Plate from 2001 to 2007.686645 Chrome. . . . . . . . . . . . . . . . . . . . . . . . $49.99

‘Hyper Force’ Velocity StackOne version can be installed on the ‘Multi Plate’ as well as Original Equipment CV carburetors, and the other will bolt directly to S&S carburetors.

For CV Carburetors and Multi Plate686623 Polished . . . . . . . . . . . . . . . . . . . . $174.99

686624 Black . . . . . . . . . . . . . . . . . . . . . . . $174.99

686625 Chrome. . . . . . . . . . . . . . . . . . . . . $174.99

Multi-Plate Spacers for Aftermarket Air CleanersAdapter rings to be used in conjunction with S&S, CV or EFI (old pattern) models.686656 20mm, smooth, polished . . . . . $94.99

686659 20mm, smooth, chrome . . . . . $114.99

687682 20mm, smooth, black. . . . . . . . $144.99

686637

Multi-Plate Kits for Big Twin Models686650 Smooth, polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$369.99

686652 Smooth, chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$414.99

686651 Grooved, polished. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$399.99

686653 Grooved, chrome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$429.99

686636 Smooth, black. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$359.99

686635 Grooved, black. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$389.99

‘Hyper Force’ 90° ElbowStainless steel elbow by Pistor. Multi Plate and air filter need to be ordered separately.686629 Polished elbow ONLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$199.99

686631 Chrome elbow ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$244.99

686798 Oval K&N air filter (shown) with TÜV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79.99

686650

HYPERFORCE A IR CLEANERS

f



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

Chrome Swept Teardrop Air Cleaner AssemblyThis swept air cleaner is a great addition to any motorcycle with a teardrop stretched tank. It fits all models with CV car-buretors from 1989 to present. You must purchase the CCI #31515 air cleaner support bracket separately.652105 Air cleaner ONLY . . . . . . . . . . . . . . . . . . . . . . . . . $164.99

31515 Support bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . $29.99

Jammer™ “Tear Drop” Style Air Cleaner Cover by PaughcoDesigned and styled after the Tear Drop Air Cleaners of the past, these beauties are made of polished cast aluminum and then brilliantly chrome plated. Measure 8” wide, by 41/2” high & 2” deep. Available in either Smooth, or Ribbed styles. Offered in ver-sions to fit either S&S E and G carbs, or CV-Keihin 1998 thru 2006 and Delphi EFI 2001 thru 2007. Fittings included where required. Made in USA by the folks at Paughco. Note: Will not fit Magneti-Marelli EFI systems.

632965 Tear Drop Smooth A/Cleaner Cover for S&S E/G carbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99

632966 Tear Drop Smooth A/Cleaner Cover for Keihin ‘88-06, Delphi EFI’s ‘01-07 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99

632967 Tear Drop Ribbed A/Cleaner Cover for S&S E/G carbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99

632968 Tear Drop Ribbed A/Cleaner Cover for Keihin ‘88-06, Delphi EFI’s ‘01-07 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99

632967

A IR CLEANERS

i Cl C b P h

632966

Scooped Air CleanerThis scooped air cleaner assembly is light weight and is polished and chrome plated for show chrome quality. Fits only Mikuni 42mm or 45mm carburetors which mount to motors with 7/16” head breather holes. Includes backing plate, air fi lter and mounting hardware.680239 Fit Twin Cam® models 1999 thru 2007 with a Mikuni

42 or 45 mm carburetor and any RevTech 125”, 115”,110”, 100” 4x4 engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . $124.99

Note: Will not mount on EFI or Keihin CV carburetor models.

8.40

EFI, ca

rburet

or & i

ntake

8

Flame Skull Air Cleaner AssemblyThis full skull design is the perfect accent for your Motorcycle. Made out of alu-minum die cast with all the necessary mounting hardware, backing plate and breather hoses with a high flow wash-able air filter element.650850 Fits Twin Cam® models 1999

thru 2007 with CV carburetor or Delphi® Fuel Injection . . . . . . . . . . . . . .$274.99

650851 Fits Evolution® Big Twin models 1993 thru 1999 with CV carburetor. . . . . . . . . . . . . . . .$274.99

650852 Fits Sportster® models 1991 thru 2006 with CV carburetor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $274.99

Jammer™ “Derby Cover” Air Cleaner AssemblyThis retro styled air cleaner was used on our “Delta 88” custom build, and was an instant hit as soon as people saw it! Featuring an early style Derby Cover for the front, this air cleaner assembly incorporates a wash-able, re-usable air filter element and a backing plate that allows instal-lation on stock Keihin CV carbs. Optional adaptor rings are available separately for mounting to Mikuni and S&S “E” and “G” carbs. The air cleaner assembly measures 71/2"-wide x 7"-tall x 3"-deep. 650800 Complete assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $139.99

47967 Adaptor ring for mounting to S&S “E” & “G” carbs . . . . . . $41.99

647402 Adaptor ring for mounting to Mikuni carbs . . . . . . . . . . . . . $39.99

47966 Gaskets for use with S&S adaptor ring (5 pack) . . . . . . . . . . . $9.99

” Air Cleaner Assembly

S&S “Patriot” Air Cleaner CoverFits S&S Super E & Super G “Shorty” carburetors ONLY. Does not require any jetting changes to a properly jetted carburetor.601796 Patriot cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $124.99

S&S Air Cleaner Cover45700 Fits S&S Super ‘E’ and ‘G’ carburetors with standard

length cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $124.99

45739

A IR CLEANERS

Fl Sk ll

. .. ....$2$27$27$27$2$22222277277$222$2 4.94.94.94.94.94.94.944.94.9.94.94.94.94 999999999999999

993 thru $$$$$$$

Chrome S&S Air CleanersThis classic design not only looks great, but will actually enhance the performance of your bike. Features include backplates with air-horn style radiused entryway and the dimpled cover with air directional cone on the inside help maximize air flow by giving intake air an efficient, easy path to follow into the carburetor. If you can’t get an S&S carb, you can at least get your stock one to breath like an S&S. Includes all breather fittings and hardware for installation.

For Original Equipment Carburetors and Throttle Bodies45739 Fits all Evolution® Big Twin models with Keihin ‘butterfly’

carburetors from 1984 thru 1991. . . . . . . . . . . . . . . . . . . . . . . $199.99

45825 Fits all Evolution® Big Twin models with Keihin ‘CV’ carburetors from 1993 thru 1999, all carbureted Twin Cam 88® models from 1999 to present, 2001 Softail® models with fuel injection, and all fuel injected models from 2002 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $209.99

45699 Fits Bendix, Tillotson and Keihin (except CV) carburetors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99

For S&S Carburetors45699 Fits S&S Super ‘B’ carburetors . . . . . . . . . . . . . . . . . . . . . . . . . . $199.99



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

Doss Custom ‘Crest’ Air CleanerUnique ‘Crest’ design chrome high-flow air cleaner performs and adds custom look.• Features overhead hidden breather filter

and billet aluminum backing plate• Comes complete with all mounting hard-

ware and hoses62580 Fits all CV carburetors from 1989

to present. . . . . . . . . . . . . . . . . . . . . $189.99

632254

632255

Jammer™ Early-Style Breather SnootsA standard item on early models, these chro-med breather snoots are available in either a smooth or ribbed version. Fit Bendix, Tillotson & Keihin (except CV) carbs. No filter element included. A real bad-ass look on retro rides! Made in USA by Paughco.632254 Smooth. . . . . . . . . . . . . . . . . . . . . . $42.99

632255 Ribbed. . . . . . . . . . . . . . . . . . . . . . . $42.99

Custom Billet Air Cleaner Kits by Jesse James WCCCNC-Machined from 6061-T6 Billet Aluminum and then polished to high luster. Kits include air cleaner, chock knob, and mounting brackets. Fits S&S “E & G” carbs. Adapter brackets available for Mikuni and CV carbs (sold separately).690420 CFL air cleaner kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $599.99

690421 Pay up sucker air cleaner kit . . . . . . . . . . . . . . . . . . . . . . . . . . . $599.99

690422 Coffin air cleaner kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $599.99

690470 Replacement air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39.99

Adapter Brackets690466 For Mikuni carburetors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $40.99

690467 For Stock CV carburetors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $40.99

A IR CLEANERS

51/2" Round Air CleanersHigh-performance round air cleaners for Bendix/ Zenith, Keihin (except CV) and Tillotson carbs.12026 Plain (not shown) . . . . . . . . . . . . $27.99

11912 Replacement filter . . . . . . . . . . . . $7.49

690421690420 690422

8.42

EFI, ca

rburet

or & i

ntake

8

Velocity Stacks by Thunder Cycle DesignsChromed billet aluminum velocity stacks for S&S and Mikuni carburetors. Sold each.

Fits S&S Super ‘E’ and ‘G’ Carburetors42174 4"-long stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$189.99

Fits Mikuni 42mm and 45mm ‘Flatside’ Carburetors42176 4"-long stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$339.99

Velocity Stack Screen42177 4"-diameter for CCI #’s 42174 and 42176 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99

42174

42176

42177

Carl’s Ram Air Velocity Stack for S&S CarburetorsAdd the power of the wind and the style of the 21st centu-ry to your trusty S&S carb with this eye-catching and func-tional velocity stack. Includes a black elastic “bird catcher” screen to keep out foreign objects.47960 Fits late model S&S Super ‘E’

and ‘G’ carburetors . . . . . . . . . . . . . . . . . . . . . . . . . $109.99

47959 Optional air filter . . . . . . . . . . . . . . . . . . . . . . . . . . . $59.99

VELOCITY STACKS

Velocity Stack by Custom Design StudiosThe velocity stack body is spun aluminum with machined billet black anodized base and brass wire screen cover. The complete unit is 5” long. Note: Optional carburetor adapters sold separately.

632917 Velocity stack with screen for Mikuni 42mm thru 48mm carburetors . . . . . . . . . . . . . . . . . . .$199.99

632918 Adapter for S&S Carburetors E & G series . . .$99.99

632919 Adapter for Harley Keihin CV carburetors . .$99.99

Velocity Stack by Custom Design Studios

‘G-Force’ Velocity Stack by Grandeur CyclesThis high-performance chrome billet velocity stack comes with internal head breath-ers, screen, and all the hardware required to install it on a Mikuni carb.619901 Fits all Evolution® and

Twin Cam 88® models with a Mikuni carburetor . . . . . . . . . . . . . . . . . . . . . $314.99

Chrome Spun Aluminum Velocity StacksThese velocity stacks are made of spun aluminum then chrome-plated. They come in a variety of fitment applications and two sizes 21/2"-long and 4"-long.611100 2.5" for Keihin CV

carburetors . . . . . . . . . . . . . $68.99

611101 4" for Keihin CV carburetors . . . . . . . . . . . . . $77.99

611102 2.5" for S&S Super E & Super G. . . . . . . . . . . . . . . $68.99

611103 4" for S&S Super E & Super G. . . . . . . . . . . . . . . $77.99

42174

42176

7



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

“Speedlines” Air Cleaner by Crime Scene ChoppersThis air-cleaner looks great by itself or used along with other Crime Scene Choppers products. The air cleaner shell is made of aluminum with a fine satin finish to match the other Crime Scene products, and measures 101/2” long, 4” wide at the widest point, and 21/4” deep. The backing plate is made of stainless steel and mounts to either S&S Super “E” & “G” or CV carbs. Made in USA.632158 “Speedlines” air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $319.99

“Rapid” Air Cleaner by Crime Scene ChoppersNew “Rapid” line features a style coordinated air cleaner with a distinc-tive scallop design and a Matching grill. The Rapid air cleaner bolts directly to S&S Super E,G,and stock CV carburetors. Bolts to a Mikuni using a standard Adapter. Includes two washable filter elements and stainless steel mounting hardware.630460 Satin finish with polished brass grill . . . . . . . . . . . . . . . . . . . . $318.99

630461 Chrome finish with chrome grill. . . . . . . . . . . . . . . . . . . . . . . . $349.99

“Rapid” Air Cleaner

630461

630460

“Speedlines” Air Cleaner by Crime Scene ChoppersThis Air Cleaner is a knockout and matches the other Finned goodies available in this Handbook! Featuring retro style fins that taper into the body, it just screams “Old School Cool”! Fits S&S Super E and G, stock CV carbs, Mikuni, Linkert and 2001-up Fuel Injection. (For fit-ment to Mikuni HSR carbs use Mikuni #HS42/001 air box adaptor). The filter comes complete with a brushed stainless backing plate, stainless hardware and washable Uni-Filter foam element. The “Speedlines” air cleaner is available in a satin finish with highlight-polished fins, or chrome plated. Replacement air filter available. Made in USA by Joe & crew at Crime Scene Choppers.632158 Speedlines Air Cleaner – Satin. . . . . . . . . . . . . . . . . . . . . . . . . .$319.99

632663 Speedlines Air Cleaner – Chrome. . . . . . . . . . . . . . . . . . . . . . .$399.99

632662 Replacement Foam Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$24.99

Knuckle Style Breather Snoots for S&S Carbs by PaughcoPaughco has taken their early style breather snoots, and designed back-ing plates & mounts to fit them to S&S E & G carbs mounted on Evo & Twin Cam (non-EFI) engines. Reminiscent of the breather snoots ran on Knuckleheads. Measure 4” wide at the widest part, 21/2” wide at the end, and 81/2” long. Chrome plated steel. No filter element included. A real classic look for retro rides! Made in USA by the crew at Paughco.632950 Knuckle Style Breather Snoot. S&S E&G- Evo’s 84-91. . . . . . $74.99

632951 Knuckle Style Breather Snoot. S&S E&G-Evo/TC 92-06 . . . . $74.99

A IR CLEANERS

8.44

EFI, ca

rburet

or & i

ntake

8

F. Kodlin Air Cleaner AssembliesUniquely designed air cleaner assemblies to fit Keihin ‘CV’ carburetors. The ‘Spades’ air cleaner is CNC-machined from aluminum and then chrome-plated for great looks. Includes the filter element and mounting hardware. Installation on anything other than a Keihin constant velocity carburetor, requires the additional purchase of one of the adapter kits below. Fits Keihin CV carburetor from 1993 to present and Delphi EFS from 2001 thru 2007.85851 F.K. ‘Halebob’ air cleaner assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99

86940 F.K. ‘Spades’ air cleaner assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99

Air Cleaner-to-Carburetor AdaptersBillet adapters permit effortless installation of Kodlin air cleaner assemblies on various carburetors.23441 Billet adapter for S&S Super ‘E’ or ‘G’ carburetors . . . . . . . . . . . . . . . . . . . . $104.99

23442 Billet adapter for Mikuni HS40 carburetors . . . . . . . . . . . . . . . . . . . . . . . . . . . $99.99

23443 Billet adapter for Mikuni HSR42 carburetors . . . . . . . . . . . . . . . . . . . . . . . . . $104.99

Note: Use of an air cleaner support bracket is recommended.

F Kodlin Air Cleaner Assemblies

Cyclesmiths™ Air CleanersA full range of billet aluminum air cleaners for Keihin ‘CV’ carburetors. Bracket kits listed below are required for correct operation.

Finned Air Cleaner16158 Fits Keihin CV carburetors . . . . . . . . . . . . . . . . $399.99

Bracket Kits16168 Fits Evolution® Big Twin models with Keihin

CV carburetors from 1990 thru 1992 . . . . . . . $15.99

23870 Fits Mikuni HSR42 and HSR45 carburetors . . $17.99

616170 Fits Evolution® and Twin Cam Big Twin models with Keihin CV carburetors from 1993 to present. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $47.99

Ness-Tech® Velocity Stack Kits• Add a radical look to your engine

with these velocity stacks• Velocity stack brackets feature

patented ‘Big Sucker’ breather technology

• The brackets work on stock Evolution® and Twin Cam 88® engines, S&S engines up to 107", and S&S engines from 111" to 124"

Note: These kits do not fit engines equipped with the 103" Screamin’ Eagle® kit.

90º Air Filter Kits650429 For S&S engines from

111" to 124" . . . . . . . $301.99

650431 For S&S engines up to 107" . . . . . . . . . . . . $299.99

650430 For Evolution® and Twin Cam engines. . $299.99

NK•

•

•

Nw

96

6

6

Nw

650428

650431Yost Pro Mod Breather and Bracket KitThis kit is great for installing aftermarket air cleaners on all Big Twins from 1993 to present whether it’s an Evolution® or a Twin Cam engine.622156 Fits all Big Twins with CV carburetor 1993 to pres-

ent or Delphi® fuel injection from 2001 thru 2007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $159.99

Yost Pro Mod Breather

A IR CLEANERS . VELOCITY STACK KITS

uretors The ‘Spades’

C l ith ™ Ai Cl



TOURING

FOOT CONTROLS

HAND CONTROLS

LIGHTING

ELECTRICAL

EXHAUST

INTAKE

ENGINE

GASKETS

TRANNY& CLUTCH

DRIVELINE

WHEELS,TIRES

& BRAKES

FRAMES

FORKS& SHOCKS

SHEETMETAL

XREF

GAUGES

CHEMICALS

GENERAL

APPAREL

SEATS & BAGS

Chrome Ball Milled Insert for S&S Air Cleaners by Pro-One™

Perfectly shaped to fit the S&S air cleaners. Complete with chrome sockethead mounting screws.65056 Fits S&S Super ‘E’ and ‘G’ air cleaners . . . . . . . $99.99

me Ball Milled Insert

Polished Aluminum 3-D Skull Air Cleaner InsertsSandcast aluminum with striking 3-D skulls polished to a brilliant shine. Includes mounting stud.37856 Fits 8" round Original Equipment air cleaners . . . . . . . . . . . . . . . . . . . . . . . . $75.99

37855 Fits S&S Super ‘E’ and ‘G’ air cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $75.99

33151 Fits Twin Cam models with Original Equipment air cleaner covers from 1999 to present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $65.99

‘Millennium’ Air Cleaner Covers by Pro-One™

Chrome-plated billet aluminum. Choose from smooth or ball milled styles.

For Twin Cam ModelsInstall over the factory Twin Cam air cleaner with included hardware. Fit Twin Cam models from 1999 to present.65455 Smooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $77.99

65456 Ball milled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $77.99

For Evolution® Big Twin ModelsInstalls in minutes over aftermarket or Original Equipment 8" air cleaners on most models from 1984 thru 1999. Includes hardware.65344 Smooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $88.99

65345 Ball milled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $88.99

‘Live To Ride’ Air Cleaner InsertsDie-cast covers fit existing air cleaner covers and install in just minutes. The 7" version fits directly on the popular round air cleaners which have been sold by many aftermarket companies over the years. The 8" insert fits the Original Equipment air cleaner covers fitted to most Evolution® Big Twin models from 1984 thru 1999.

For Aftermarket 7" Air Cleaners18924 Chrome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99

For Original Equipment 8" Air Cleaners18925 Chrome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $19.99

18927 Gold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $29.99

Ness® ‘ Alternatives’ Die-Cast Air Cleaner CoversWork great with Ness® ‘Big Sucker’ kits. The 8" round chrome covers fit all Twin Cam and Evolution® Big Twin models when using Screamin’ Eagle® backing plate kits.04933 Radius smooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $81.99

A IR CLEANER COVERS

18927

18924

18925

8.46

EFI, ca

rburet

or & i

ntake

8

Choke WiresUp to 3"-longer than stock to fit almost all models with push/pull choke controls.15900 21"-long for dash-mounted choke assemblies with 3/16" shank and 10-32 thread.

Knob and nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$13.99

14900 Motor mount/under tank style for most Big Twin models with CV carbs (repl. OEM 29211-86) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

14901 Motor mount/under tank style for most Sportster® and Buell® models with CV carbs (repl. OEM 29238-92) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

Chrome Choke Knob Covers by Pro-One™

Innovative design contains the entire choke knob. Fit stock plastic knobs on most models from 1980 to 200665285 Smooth. . . . . . . . . . . . . . .$22.99

65286 Ball milled . . . . . . . . . . . .$22.99

Chrome Choke KnobCNC-machined in the USA from billet alumi-num and chrome-plated. Fits all models with choke cables having a 10-32 thread.37305 Chrome Choke Knob

Replaces OEM 29228-80 . . . . . . $21.99

Marquis Choke Knob Cover by KüryAkyn™

Installs over the stock black plastic knob. It looks great and is easier to grab. Fits Sportster® and Big Twin models with CV carbu-retors from 1988 to present.48244 Marquis Choke Knob Cover

Sold each . . . . . . . . . . . . . . . . . . . . $29.99

CV Carb Choke Bracket by Paul Yaffe OriginalsOften when using a CV Kehin carb on custom bikes, there is no place to mount the choke cable. But not for long. Here is a cool bracket that allows you to mount your choke right behind the carb body that will place the knob just above the carb top for easy access and a clean look. Machined from 6061-T6 billet aluminum and chrome-plated.600029 CV Carb Choke Bracket Sold each . . $39.99

b

CHOKE KNOBS . CABLES

i h k b

hoke Wiresto 3"-longer than stock to fit almost all models with

sh/pull choke controls.

CHOKE KNOBS


Documents

EFI carburetor & intake - Who-Sells-it