Atijera, Evamarie (CPC) ~ ~p s X11?(~f~(,(,~ - SF Planning

Atijera, Evamarie (CPC) ~ ~p s X11?(~f~(,(,~

From: Lindsay, Ashley (CPC)Sent: Thursday, July 06, 2017 1:01 PMTo: Tony PhillipsCc: Matthew Nickel; Steve Barich; Atijera, Evamarie (CPC)Subject: RE: Request to Withdraw Comcast LOD's -San Francisco

Hi Tony,

No worries; thank you for the withdrawal confirmation.

Kind regards,

Ashley LindsayCurrent Planning +Wireless SpecialistPlanning Department, City and County of San Francisco1650 Mission Street, Suite 400, San Francisco, CA 94103Email: Ashley. LindsayCa~sf~ov•orq Direct: 415-575-9178

From: Tony Phillips [mailto:[email protected]]Sent: Thursday, July 06, 2017 11:25 AMTo: Lindsay, Ashley (CPC)Cc: Matthew Nickel; Steve BarichSubject: Request to Withdraw Comcast LOD's -San Francisco

Good Afternoon Ashley-

apologize for not getting back to you on this sooner. I was waiting for our client to "Officially" approve thewithdrawal

Please let this e-mail serve as our request to withdraw the (3) LOD applications listed below.

Thanks again for all your help. 1900 Market Street .— (~ ~ ~O(7- Up782c~ ~~p• 2001 Van Ness ~ (~ ~ ~ji7 - ~-~$ ~ y~D• 2599 San Bruno. _ ~ ~, X17 ~ ~-~g 32 ~~

Tony Phillips I Zoning & Permitting I Mobile: 847-331-3659SAC Wireless 1540 W. Madison, 17th Floor, Chicago, IL [email protected]

From: Lindsay, Ashley (CPC) [mailto:ashlev.lindsav@sf~ov.or~]Sent: Thursday, July 06, 2017 11:34 AMTo: Tony Phillips <[email protected]>Subject: Request to Withdraw LODs

Good morning Tony,

1

eatijera

Highlight

~~ ~,~. ~ JW I R E L E S S

June 14, 2017

Mr. Scott SanchezZoning AdministratorSan Francisco Planning Department1650 Mission Street, Suite 400San Francisco, CA 941Q3

CIC ~ ~~~ ~~3 ~' ~ 6 4

,~ , L-,~~'~',f,'~c~9,`~' ~~c/(~'E-L ~ ~~

RE: Letter of Determination Request — Comcast Machine Q— 2599 San Bruno

Dear Mr. Sanchez;

My firm is representing Comcast for the Leasing, Permitting and Installation of their latest technologycalled Machine Q. Machine Q is a low power network that is part of the Internet of Things (IoT). FromSmart Communities and Infrastructure where Utilities, Waste Management, Temperature and Lighting canbe monitored, to Transportation and Logistics. Machine Q is a flexible cost-effective solution suitable for awide range of applications targeted towards Municipalities and Utilities.

We are currently seeking approval for the installation of Machine Q antennas on the existing Billboardat 2599 San Bruno -Block 5438 Lot 021— Planning District 12 —South Central

The installation consists of 2 — 28" Omni Antennas, an 8" LTE Antenna, a 3" GPS antenna and a smallGateway Unit. This is all powered by a Unit Called PoE (Power over Ethernet). The Total weight of theseitems without mounting brackets is less than 121bs. There will be no ground disturbance and minimalvisual Impact. I've attached a copy of the proposed drawings, photo simulations, and spec sheets.

Hard copies of these documents along with a check for $664.00 will be overnighted to your department.

We greatly appreciate you taking the time to review our request. I can be reached at 847-331-3659 shouldyou have any questions.

st Regard ,

t . -Tdnjt-P illiZoning &Permitting LeadSAC Wireless for Comcast540 W. Madison —17th FloorChicago, IL [email protected]

~AmphenolANTENNA SOLUTIONS

840...925 MHz

~JAYBEAM

7553xxxSingle Band ~ Omni-Directional ~ Colinear ~ V-Pol ~ 360° ~ 5.1 dBi ~ Fixed Electrical Tilt

• Rugged and durable UHF colinear antenna designed for Telemetry, Paging and Trunked Radio applications• Housed inside a ahigh-strength glass fibre shroud• Includes an integrated mounting clamp allowing easy installation on poles or horizontal rails• Robust antenna design insures reliable operation in harsh environmental conditions

Ordering Options

Replace "xx~" in the model number with one of the options below to signify the desired frequency band

Modol Number Frequenry Band

Model Number Options (xxx) 7553865 840-890 MHz

7553893 860-925 MHz

Electrical Characteristics

Frequency Band See Options Listed Above

Polarization

Horizontal Beamwidth

Vertica► Beamwidth

360°

35°

Gain 3.0 dBd (5.1 dBi)

Impedance 50(1

VSWR

Power Rating

Connector Type

Vertical

Lightning Protection

Mechanical Charederistics

Shroud Material /Color

Mounting Section Material

uimensions ~~ength)

Weight without Mounting Brackets

Wind Load O 160 km/hr (100 mph)

Mou~iny Opdons

< 1.5:1

150 W

N female + 0.5 m RG213 cable

DC Grounded

Glass Fibre (fd21 mm) /White

Aluminium

730 mm 2$.7 in

0.5 kg 1.1 Ibs

35 N 7.9 Ibf

Mounting Brecket Kit Integral mounting clamp and V bolts for pipe or horizontal rail

Fits Pipe/Rail Diameter 38-50 mm I 1.5-2.0 in

See pages 3 & 4 for additional mounting information.

Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extremeoperational conditions and/or stress on structural supports is beyond our comrol. Such conditions may resuk in damage to this product Improvements to products maybe made without notice.

REV121615U www.amphenol-antennas.com 1 of 4



Antenna Patterns

840...925 MHz

tA. i

10' ~ D

p0 s ... s p

tp , b

b ~0

Horizontal Vertical

Return LossM

Gain Chart

Note: Return loss, gain and patterns are for the 860-925 MHz model

Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extremeoperational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.




840...925 MHz

_-Assombly &Mounting Instructions

Please read these insVudions fully before commencing

Tools Required 13 mm A/F Spanner

Securely fix mast clamp to vertical or horizontal mounting rail as required.Mounting Tighten fixings to required torque (M8 = 20Nm).(see mounting variations section) Ensure adequate lightning protection.

Envelope is provided by installation.

Ensure connector is clean and dry. Mate with feeder cable connector.

Connection Cover with plastic sleeve and seal in customer approved manner.Ensure cable routing is not stressed.Cable minimum bend radius is 51.5 mm.

Maintenance

Annual VSWR and visual inspection for loose or missing parts should ensure stated performance is maintained.

Mounting Variations

CRP

PURE WriiT(RAL 9010

Standard Mounting(Included)

O.Sm DOWNLEAD

PLASTIC SLEEVE

N TYPECONNECTOR

Parts Identification

Vertical Mounting Tube(Connector passes through middle of tube)

Reek Mounting(With connector pacing to below deck)

Horizontal Mounting Tube

Deck Mounting(With connector remaining above deck)

Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a resuh of normal testing, manufacwring and operational conditions. Extremeoperetional conditions and/or svess on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.




Mounting Variations Model Number ~ Orientation

Horizonul ~

Aaambly

e~eTe

~~s.

Optional MountingArrangement(ordered separately)

XSL9256087

Vertical

dd

840...925 MHz

~ Item Number Description Quantky

1 Mounting Bracket Clamp 2- -- --- ----- -- - — --

2 Universal V & H Bracket 1

3 V Clamp 2

Parts List 4 Galvanized, M10 Full Nut 24

5 Galvanized, M70 Plain Washer 16- --- - - __

b Galvanized, M70 5/Coil Spring Washer 4

7 Galvanized, M10 x 260 mm Studding 4

B _ Aluminium Tube, 01?'h2" x 75WG x 1000 mm _ 1

Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extremeoperational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products maybe made without notice.


•

TEKTELIC's KONA Macro IoT Gateway providesnetwork operators with a carrier grade product forthe deployment of LoRaWAN Internet of Thingsnetworks. The Gateway enables massive scalabilityin a compact form factor by supporting up to 12million messages per day.

It is ideal for public and private network operatorsthat require Full Duplex, mulitiple Rx and TxChannels, cost effective and reliable LoRaWANgateways to maximise their network investment foryears to come.

Product Differentiators:

• High availability carrier grade design with supportof in-service configuration and software updates.

• Environmentally hardended aluminum enclosurefully tested to withstand extreme temperatureconditions.

• Full duplex operation making all receive andtransmit channels availabe simultaniously.

~, •Excellent isolation between the Tx and Rx bandsas well as out of band rejection of Cellular andPaging networks.

~ •Day-One scalability with support of up to12 million received messages per day.

• Easy to deploy supporting different backhaul andpower options.

• Fully integrated with the broader eco-system ofLoRaT"" network servers and sensors.

~~

"_"~~/E~EuC~ o m m u n 1 t a t I o ~ s

Key FeaturesNA, EU and other ISM Bands

Full Duplex 72 Rx and 4 Tx Channels (NA)

Up to 12 million messages per day

Precise Network Synchronization (GPS)

Localization Support

1 Watt (30 dBm) Tx Power

Hardened Carrier Grade Enclosure

Backhaul Connectivity (ETH / 3G / 4G)

TEKTELICc ommun i cat i on s

KONA Macro IoT GatewayHigh Capacity LoRaWAN Gateway for Widea Area Deployments

Technical and Functional System Specifications

Mechanical ParametersMTBF IS years

DC Power Consumption < 40 W (POE++)

Operational Temperature -40°C to+55`C

Operational Humidity 10%to 100~o Condensing

Ingress Protection IP67

Size 222 x 265 x 97 mm

Weight 4 kg

Volume 5.5 L

InterfacesEthernet Backhaul R1-45 (POE Capable) ~~

GPS N-Type

Cellular Backhaul (36/46) N-Type (Optional)

Hybrid Optical and DC Power Harting Hybrid (Optional)

LoRa Antenna (2 ports) N-Type (2nd Port Optional)

Power -48VDC

Regulatory ComplianceSafety UL 60950-1 (US/C), IEC 60950-1 (CE)

Environmental ETSI EN 300 019-2-1, 300 019-2-2

ETSI EN 300 019-2-3, 300 019-2-4

Regulatory FCC Part 15

ETSI EN 300 489-1/4, ETSI EN 302 326

Specifications subject to change without notice.

LoRa Radio ParametersISM NA Band 902 - 915 MHz (Rx)

923 - 928 MHz (Tx)

Tx Power 2 x 1W (2 x 30 d8m)

Rx Sensitivity -142 dBm (SF12, 293 bits/sec)

Rx Noise Figure 4 d8

Rx Linearity -10 dBm

Rx Dynamic Range 70 d8 Analog, 100+ dB Digital

Tx to Rx Isolation 75 d8

Software and ManagementGUI Embedded Managment Webpage

Auto-discoverable over~P

Tools Access Control List managment

36/46 Parameter Configuration

System Health Monitor

Flight Recorder

Radio Configuration and Control

Remote Software Upgrade

Active and Passive image management

Networking DHCPv4 client

TFTP server

HTTP server

Firewall and Access Lists

97 mm

L! -

At TEKTELIC Communications we develop and build high performance

wireless products including Small Cell Base Stations, Wireless Backhaul

Systems, High Power Radios, Amplifiers and IOT Gateways.

For more information please visit www.tektelic.com

265 mm

— -~

~ ~/f>.

--%--

~~ TEKTELICc ommun i ca t i on s

,1.403.338.6900 [email protected]

- 222 mm

SITE ID: SFO-CA-M-N-0000041-T64

SITE ADDRESS: 2599 SAN BRUNO AVE, SAN FRANCISCO,CA 94134

V I C I ITY MAPPHOTOSIMU~ATI~N VIEWPOINTS

~`~,....~k

W I R E L E S SSAC AE DESIGN GROUP. INC.

540 W. MADISON ST.,17TH FLOOR,CHICAGO, IL 60661.

www.sacw.com~~s ~ ~ ~!_

~ ~~ Trylon.. ~ ,.1825 W. WALNUT HILL LANE, SUITE 302

IRVING, TEXAS 750381-855-669-5421



PHOTOS MUTATION VIEW 1LOOKING SOUTHWEST

`..~ JW I R E L E S S

SAC AE DESIGN GROUP. INC


www.sacw.com

+~,s~~~,: ~f Trylon~ ~~1825 W. WALNUT HALL LANE, SUITE 302

IRVING, TEXAS 750381-855-669-5421



PHOTOSIMU~ATION VIEW 2LOOKING NORTHEAST

~~-W I R E L E S S

SAC AE DESIGN GROUP. INC.


-

www.sacw.com

~~~~~~

Trylon'~-~ .1825 W. WALNUT HILL LANE, SUITE 302

IRVING, TEXAS 750381-855-669-5421

A COMCAST SERVICE

PROJECT NAME: SFO-CA-M-N-0000041-T64 2599 SAN BRUNO AVENUECOMCAST NUMBER: SFO-CA-M-N-0000041-T64OUTFRONTBB NUMBER: 01121.000759.000759A

2599 SAN BRUNO AVENUESAN FRANCISCO, CA 94134

PROJECT TEAM

PROJECT MANAGEMENT:SAC WIRELESSMATTHEW NICKEL540 W. MADISON ST, 16TH FLOORCHICAGO, ILLINOIS 60661PHONE: (630) 674-2821EMAIL: matthew.nlckelQsacw.com

SITE ACQUISITION:SAC WIRELESSSTEVE BARICH540 W. MADISON ST, 16TH FLOORCHICAGO, ILLINOIS 60861PHONE: (312)9674285EMAIL: steve.barkhQsacw.wm

ARCHITECTSAC WIRELESSNESTOR POPOWYCH, AIA.540 W. MADISON ST, 16TH FLOORCHICAGO. ILLINOIS 60667PHONE: (312) 953-6777EMAIL: nestor.popowych(d secw.com

ENGINEERSAC WIRELESSTAHZAY RAMIREZ, P.E.5015 SHOREHAM PIACE SUITE 750SAN DIEGO, CA 92122PHONE: (619) 736-3766 XN4EMAIL: ~ahzay.ramlrez(~sacw.com

CONSTRUCTION:SAC WIRELESSTERRY KILLGORE1401 WILLOW PASS, SUITE 350CONCORD, CA 94519PHONE: (904) 923.9028EMAIL: terty.klllgoreQsacw.com

GENERAL CONTRACTOR NOTES

DO NOT SCALE DRAWINGS IF NOT FULL &ZE 124X361

CONTRACTOR SHALL VERIFY ALl PUW S AND EXISTING DIMENSIONS AND CONDITpNSON THE JOB SITE ANO SHALL IMMEDIATELY N071FV THE ARCHITECT IN WRfTING OFANA DISCREPANCIES BEFORE PROCEEDING WRH THE WORK OR BE RESPONSIBLEFOR THE SAME.

DISCLAIMER

THESE DRAWINGS REPRESENT AN EXISTING TELECOMMUNICATIONS COMPOUND AND WEREPRODUCED WRMOUT THE BENEFIT OF A LAND SURVEY. ALl PROPERTY LINES, EASEMENTS, ANDSETBACKS SHALL BE VERIFIED PRIOR TO START OF CONSTRUCTION. SAC WIRELESS DOES NOTGUARANTEE THE ACCURACY OF SAID PROPERTY LINES. EASEMEMS AND SETBACKS.

VICINITY MAP

~~ ~

4

~ c':

SITE. PORTOLA PLC'

~c.}.."~..~,

v:.,i;,; ~.a ~,

NOT TO SCALE NORTH

DRIVING DIRECTIONS

FROM: SAN FRANCISCOINTERNATIONAL AIRPORT

7. GET ON US-101 N FROM AIRPORTACCESS RD

2, CON77NUE ONTO AIRPORT ACCESSRD

3. KEEP LEFT TO STAY ON AIRPORTACCESS RD

4. MAKE A U-TURN5. CONTINUE STRMGHT TO STAY ON

AIRPORT ACCESS RD6. USE THE 2ND FROM THE RIGHT

LANE TO KEEP RIGHT AT THE FORKAND CONTINUE TOWARD US101 N

7. KEEP LEFT AT THE FORK. FOLLOWSIGNS FOR SAN BRUNO/U.S. 107 N

TO: 2599 SAN BRUNO AVENUESAN FRANg5CO3 CA 84134

AND MERGE ONTO US-101 NB. FOLLOW US101 N TO BAYSHORE

BLVD IN SAN FRANCISCO, TAKEEXIT 4290 FROM US101 N

9. MERGE ONTO US-107 N10. TAKE FJCIT 4290 TOWARD PAUL

AVENUE11. CONTINUE ON BAYSHORE BLVD.

DRIVE TO SAN BRUNO AVE12. MERGE ONTO BAVSHORE BLVD73. BURN LEFT ONTO BACON ST14. TURN RIGHT AT THE 1ST CROSS

STREET ONTO SAN BRUNO AVE

PROJECT DESCRIPTIONTHIS PROJECT IS A COMCAST FACILITY. IT CONSISTS OF THE FOLLOWING:

• (2) NEW COMCAST 5tlB1 OMNI ANTENNAS• (t) NEW COMCAST LTE OMNI ANTENNA• (t)NEW COMCAST GPS ANTENNA• (7) NEW COMCAST MACRO GATEWAY RADIO• (7) NEW COMCAST OUTDOOR PoE INJECTOR• (1) NEW COMCAST GROUND BAR• (1)NEW VERTICAL UNISTRUT• (2) NEW HORIZONTAL UNISTRUTS

PROJECT SUMMARY

APPLICANT/LESSEE:

machineCOMCAST'CENTFR•1701 JFK BLVD.PHILADELPHIA. PA 19103

ASSESSOR'S PARCEL NUMBER:54381027

PLANNING DISTRICT:DISTRICT 12: SOUTH CENTRAL

APPLICANT'S REPRESENTATIVE:SAC WIRELESS540 W. MADISON ST, 16TH FLOORCHICAGO, ILLINOIS 60861PHONE:

PROPERTY OWNEROWNER: OUTFRONTBBADDRESS: 405 LEXINGTON AVENUE. 14TH FLOOR

NEW YORK, NY 10174CONTACT: RANDY GAYEREMAIL: RGAYERCdDIAMONDCOMM.COM

PROPERTY INFORMATION:PROJECT NAME: SFO-CA~1-N-0000041-T64 2599 SAN BRUNO AVENUECOMCAST NUMBER: SFO-CMM-N-000~047-T64OUTFRONTBB NUMBER: 0112~.000759.000759ASfTE ADDRESS: 2599 SAN BRl1N0 AVENUE

SAN FRANCISCO, CA 94134

GEODETIC COORDINATES:LAT. 37.72895' N (NAD83)LONG. -122.40377° W (NA083)ELEV. 71'AMSL

CONSTRUCTION INFORMATION:AREA OF CONSTRUCTION: N/AJURISDICTION: SAN FRANCISCOOCCUPANCY: UNMANNEDTYPE OF CONSTRUCTION: BILLBOARDACCESSIBILITY REQUIREMENTS: FACILIN IS UNMANNED AND NOT FOR HUMAN

HABITATION. ACCESSIBILIN NOT REQUIRED.

CODE COMPLIANCE

ALL WORK AND MATERIALS SHALL BE PERFORMED ANA INSTALLED IN ACCORDANCE WRH THECURRENT EDRIONS OF THE FOLLOWING CODES AS ADOPTED BY THE LOCAL GOVERNINGAUTHORITIES. Al WORK SHALL CONFORM TO 2013 EDITION iRLE 24. CALIFORNIA CODE OFREGULATIONS. NOTHING IN THESE PLANS IS TO BE CONSTRUED TO PERMR WORK NOT

i CONFORMING iG THE LATEST EDITIONS OF THE FOLLOWING CODES.

1. 2016 CALIFORNIA ADMINISTRATIVE CODE 3. 2016 CALIFORNIA ELECTRICAL CODE

2. 2016 CALIFORNIA BUILDING CODE 4. 2D16 CALIFORNIA FIRE CODE 2.06

8~ CALL 811

e WWW.CALL811.COM

_ ,/ CONTMCTOR TO CALLiO/ VERIFY UTILfi7ES AT

LEAST TWO WORI(ING

KDOw wh2t's b@IOW. onus vawR ro oiccir+c

Call besore you alg.

SHEET DESCRIPTION REV

T•t TRLE SHEET 0

T-2 fiENERAL NOTE535PEGFICAT10N5 0

A4 SrtE PLAN 0

A-2 ENLARGED SI7E PLAN 6 ANTENNA d EOUIPMEM PLAN 0

A•3 SOUTHWEST 8 SOUTHEAST ELEVAT10N5 0

A> EQUIPMENT DETAILS 8 SPEGFICATIONS 0

A~4.1 EQUIPMENT DETAILS 8 SPECIFICAT10N5 0

E•1 1-LINE DWGRAM d NOTES 0

G-1 SCHEMATIC GROUNDING PLAN 6 DETPILS 0

CONSTRUCTION DRAWINGS

ISSUE STATUSREV. DATE OESCRIPTpN BV

A OS/10/'17 90%CONSTRUCTION AS

0 05/'16177 t00Yo CONS7RUC710N CM

~I JW I R E L E S S

SO15 SHOREHAM FLACE, STE. 15USAN pEGO, CA 9Y133

PROPRIETARY INFORMATIONTHE IIiORMATgN LOHTNMED M! THlS 9ET OF

OMYAXGS IS PPOPREf~RY i GpIFpENTNL TOVEftIZON WIRELESS

PNY 115E OR UISCLOSUflE O1HER THRN AS RREUTES TO VEWZON MARELE3813 STRICTLY

PgOHI&LEO

c~O

W ~

n 1 U d

W > ~Q

W Z ~N W W~ („) O

Fy Q2Q Ud

U ~ ~~/~ 0 ~ m

1 1 V Y

Q ~o

~I~~~S~o~ ARCN~ ~

X11'•\0• 'Tit \

., o~~~esro z~vovowr

* ~ REN ~-]0.~I

\N ~•~Q ~~~~ --

_TF~F p~ ~J~''~i//// 0612-17

DATE•

(O1---e-- Q

w ~

F— Z O O W 7~ O t'~r w Q ~

W ~ ~ z of Z v~ o Q ~ ~ >¢Z 0 ~ ¢ o a U

z ~ ~ ~zU Z ~ ~ ~ ~ !~

m U

~ ~ Z w °° a~

~ U (~ ~ Z rn Z

~ ~ Z ~ N ~

N V O0C..~

SHEET TITLE:

TITLE SHEET

T-1

ISSUE STATUSGENERAL NOTES: SPECIFICATIONS:

REV. DATE OESCRIPTgN BV

A OS/10H7 90%CONSTRUCTION AS

0 OS/te/t7 t00%CONS7RUC710N CM1. THIS FACILITY IS AN UNMANNED CELLULAR TELEPHONE EQUIPMENT FACILfTY. THE

OCCUPANCY CLASSIFICATION IS U [2016 CBC, TITLE 24, PART 2, VOLUME 1, SECTION METALS312, AND SECTION 307.1.1 EXCEPTION #9].

STRUCTURAL FRAMING SYSTEM AND EQUIPMENT2. THIS FACILITY IS EXEMPT FROM ACCESIBILITV REQUIREMENTS PER 2016 CBC SECTION

11B-203.5 THIS FACILITY IS NON-0CCUPIABLE SPACE AND ENTERED ONLY BY SERVICE ~ CABLE LADDERS AT INTERIOR SPACES WHERE INDICATED SNALL BE 1-1(2' SOLID BARPERSONNEL THIS SPACE IS NOT FOR HUMAN OCCUPANCY. STRINGERS TYPE

3. THE CONTRACTOR SHALL VERIFY ALL EXISTING CONDITIONS AND DIMENSIONS PRIOR ^TO SUBMITTING HIS BID. ANY DISCREPANCIES, CONFLICTS OR OMISSIONS SHALL BE 2• ALL UNISTRUT SHALL BE P7000 (1S/B').REPORTED TO THE ARCHITECT I ENGINEER PRIOR TO SUBMITTING BIDS, AND

~~~

PROCEEDING WITH ANY WORK. 3. MICROFIECT SHALL BE B 7 1 1 8 (U.N.O.) TO MATCH CABLE TRAY.

J

4. THE CONTRACTOR SHALL NOTIFY ARCHITECT /ENGINEER OF ANY ERRORS, 4. CABLE RUNS ON ROOF TOP AND OUTDOOR APPLICATIONS, SHALL BE HOT DIPPED W I R E L E S SOMISSIONS, OR DISCREPANCIES AS THEY MAY BE DISCOVERED IN THE PLANS, GALVANIZED AFTER FABRICATION.SPECIFICATIONS, dNOTES PRIOR TO STARTING CONSTRUCTION. INCLUDING BUT NOTLIMITED BY DEMOLITION. THE CONTRACTOR SHALL BE RESPONSIBLE FOR 5. ALL ANTENNA SPECS. PER RF DATA SHEET. w+s sxoaeH~r vuce, sue. ~wCORRECTING ANY ERRORS, OMISSION. OR INCONSISTENCY AFTER THE START OF e^~+ q~co. ~~9z+azCONSTRUCTION WHICH HAS NOT BEEN BROUGHT TO THE ATTENTION OF THE

619.776.]786ARCHITECT/ENGINEER AND SHALL INCUR ANY EXPENSES TO RECTIFY THE SITUATION.

PROPRIETARY INFORMATIONTHE METHOD OF CORRECTION SHALL BE APPROVED BY THE ARCHITECT I ENGINEER ELECTRICALRESPONSIBLE OF THE PROJECT. rHe uFonw~non eoxtuNeo ix Tws ser ofVROPPET~RY

5. PRIOR TO STARTING CONSTRUCTION, THE CONTRACTOR HAS THE RESPONSIBILITY TO ~~ REFER TO DRAWINGS FOR SITE SPECIFIC INFORMATIONDMN1NG519 8 CONFIOENTNL TO

~RIZON YARELE56

LOCATE ALL EXISTING UTILITIES. WHETHER OR NOT SHOWN ON THE PLANS, AND TO ~1(Y USE OR D19CLOSURE OTHER THAN AS RPROTECT THEM FROM DAMAGE. THE CONTRACTOR OR SUBCONTRACTOR SHALL BEAR 2. ALL ELECTRIC WORK TO COMPLY WITH THE LATEST EDITION OF THE CALIFORNIA RFIATES TO VERIZON WI0.ELES515 STRICTLY

THE EXPENSE OF REPAIRING OR REPLACING ANY DAMAGE TO THE UTILITIES CAUSED ELECTRICAL CODE. (REFER TO THE COVER SHEET) vrso~o

DURING THE EXECUTION OF THE WORK. CONTACT USA DIG ALERT Q 800.227-26003. ALL INTERIOR SEISMIC UNISTRUT SHALL BE GROUNDED WITH i1& STRANDED COPPER

6. PRIOR TO STARTING CONSTRUCTION, THE CONTRACTOR SHALL PROTECT ALL AREAS WITH GREEN JACKET. ALL CONNECTIONS TO BE DOUBLE LUG.FROM DAMAGE WHICH MAY OCCUR DURING CONSTRUCTION. ANY DAMAGE TO NEW OR c'~EXISTING SURFACES, STRUCTURES OR EQUIPMENT SHALL BE IMMEDIATELY REPAIRED q, BEFORE STARTING TRENCHING, THE CONTRACTOR SHALL VERIFY LOCATION AND ~OR REPLACED TO THE SATISFACTION OF THE PROPERTY OWNER. THE CONTRACTOR DEPTH OF ALL EXISTING LINES AFFECTED BY THE CONTRACT AND IMMEDIATELY y~ ~SHALL BEAR THE EXPENSE OF REPAIRING OR REPLACING ANY DAMAGED AREAS. NOTIFY THE PROJECT MANAGER IF ANY REROUTING OF EXISTING L1NE5 IS ~

V7. A COPY OF THE APPROVED PLANS SHALL BE KEPT IN A PLACE SPECIFIED BY THE NECESSARY.///~~~

a~ - dGOVERNING AGENCY, AND BY LAW SHALL BE AVAILABLE FOR INSPECTION AT ALL

~ aTIMES. IT :S THE CONTRACTOR'S RESPONSIBILITY TO ENSURE ALL CONSTRUCTION~ W =SETS REFLECT THE SAME INFORMATION AS THE APPROVED PLANS. THE CONTRACTOR

WSHALL ALSO MAINTAIN ONE SET OF PLANS AT THE SITE FOR THE PURPOSE OF Z aDOCUMENTING ALL ASBUILT CHANGES, REVISIONS, ADDENDA, OR CHANGE ORDERS. ~ W WTHE CONTRACTOR SHALL FORWARD THE AS-BUILT WI REDLINED DRAWINGS TO THE ■ ~ UARCHITECT /ENGINEER RESPONSIBLE OF THE PROJECT AT THE CONCLUSION OF THE ^ f FPROJECT. ~ yl ~ _

a8. THE CONTRACTOR SHALL BE RESPONSIBLE FOR THE COMPLETE SECURIT' OF THE (aj dSITE WHILE THE WORK IS IN PROGRESS UNTIL THE JOB IS COMPLETE. ' ` V ~ O

O~ ~9. THE CONTRACTOR IS RESPONSIBLE TO PROVIDE TEMPORARY POWER, WATER, AND

0TOILET FACILITIES AS REQUIRED BY THE PROPERN OWNER OR GOVERNING AGENCY. 0]

C~ U10. ALL CONSTRUCTION THROUGH THE PROJECT SHALL CONFORM TO THE LATEST C.B.C. lYiAND ALL OTHER GOVERNING CODES. INCLUDING THE CALIFORNIA ADMINISTRATIVE Q ~CODES TITLE 8, 19, AND 24. THE MOST RESTRICTIVE CODE SHALL GOVERN. Q

11, THE CONTRACTOR AND SUBCONTRACTOR SHALL COMPLY WITH ALL LOCAL AND STATE ~

~

REGULATIONS INCLUDING ALL OSHA REQUIREMENTS.

12. WHEN REQUIRED STORAGE OF MATERIALS OCCURS, THEY SHALL BE EVENLYDISTRIBUTED OVER THE FLOOR OR ROOF SO AS NOT TO EXCEED THE DESIGNED LIVELOADS FOR THE STRUCTURE. TEMPORARY SHORING OR BRACING SHALL BE PROVIDED ///~~~~~~WHERE THE STRUCTURE OR SOIL HAS NOT ATTAINED THE DESIGN STRENGTH FOR THECONDITIONS

/~~~D AR~H~rPRESENT. /~I~~1`' ....,

~G • ~' cC~'\13. THE CONTR4CTOR SHALL SUPERVISE AND COORDINATE ALL WORK. USING HISPROFESSIONAL KNOWLEDGE AND SKILLS. HE IS SOLELY RESPONSIBLE FOR ALL

('\ "; •. ~~esro r, vavowr

CONSTRUCTION MEANS, METHODS, TECHNIQUES, PROCEDURES AND SEQUENCING`~* ~'~~

AND COORDINATING ALL PORTIONS OF THE WORK UNDER THE PROJECT.\ nEN W/~L ]0.1

;~N e,~

y~~~14. THE CONTRACTOR SHALL 8E RESPONSIBLE TO OBTAIN AND PAY FOR ALL PERMITS, ~, ,. Q-LICENSES AND INSPECTIONS WITH RESPECT TO THE WORK TO COMPLETE THE ~~OF OBI'PROJECT. BUILDING PERMIT APPLICATIONS SHALL BE FILED BV THE OWNER OR

/\1-►~~i ii~~ o6,i2~i~AUTHORIZED AGENT. CONTRACTOR SHALL OBTAIN THE PERMIT AND MAKE FINAL DATE'

PAYMENT OF SAID DOCUMENT. ~

~~

15. ALL DIMENSIONS TAKE PRECEDENCE OVER SCALE. DRAWINGS ARE NOT TO BE SCALEDUNDER AN'i CIRCUMSTANCES. Q

16. THE CONTRACTOR SHALL PROVIDE ALL NECESSARY BLOCKING, BACKING. FRAMING,LI..~ ~

HANGERS OR SUPPORTS FOR INSTALLATION OF ITEMS INDICATED ON THE DRAWINGS. ~ z OG OO ~17. THE CONTRACTOR SHALL PROVIDE THE FIRE MARSHALL OR U.L APPROVED MATERIALS ~ w Q

w ~ Z ~ Z ~TO FILUSEAL PENETRATIONS THROUGH FIRE RATED ASSEMBLIES. ~7"~ Q ~ >

18. NEW CONSTRUCTION ADDED TO EXISTING CONSTRUCTION SHALL BE MATCHED IN^ Q

Q ~ O Q p a UFORM, TEXTURE, MATERIAL AND PAINT COLOR EXCEPT AS NOTED IN THE PLANS. Z ~ Z U~ O O O

19. THE CONTRACTOR SHALL PROVIDE PORTABLE FIRE EXTINGUISHERS HAVING A ~ ~i ~ ~~y, N j ~MINIMUM 2A:10-B:C RATING WITHIN 75FT. OF TRAVEL TO ALL PORTIONS OF THE V Z ~ ~ ~ m UCONSTRUCTION AREA. ~

20. MATERIALS TESTING SHALL BE TO THE LATEST STANDARDS AVAILABLE AS REQUIRED O ~ Z m ~p NQ8Y THE LOCAL GOVERNING AGENCY RESPONSIBLE FOR APPROVING THE RESULTS. ~ Q ~ F- ~ ~U~ ~ ~ z ~Q

Z21. ALL GENERAL NOTES AND STANDARD DETAILS ARE THE MINIMUM REQUIREMENTS TO O ~ ~ N ~BE USED IN CONDITIONS WHICH ARE NOT SPECIFICALLY SHOWN OTHERWISE. ~ ~ H LL

C/)N22. ALL DEBRIS AND REFUSE IS TO 8E REMOVED FROM THE PROJECT. PREMISES SHALL BE N V ~

LEFT IN A CLEAN BROOM FINISHED CONDITION AT ALL TIMES. ~ O

~23. BUILDING INSPECTORS AND/OR OTHER BUILDING OFFICIALS ARE TO BE NOTIFIEDUPRIOR TO ANY GRADING AND CONSTRUCTION EFFORT AS MANDATED BV THE

SHEET TITLE:GOVERNING AGENCY.

24, ALL SYMBOLS AND ABBREVIATIONS ARE CONSIDERED CONSTRUCTION INDUSTRY GENERAL NOTES 8STANDARDS. IF A CONTRACTOR HAS A QUESTION REGARDING THEIR EXACT MEANING SPECIFICATIONSTHE ARCHITECT OR THE ARCHITECT /ENGINEER RESPONSIBLE OF THE PROJECTSHALL BE NOTIFIED FOR CLARIFICATIONS.

NOT USED 2 GENERAL NOTES 8~ SPECIFICATIONS 1

SITE PLAN

~ ~ \ ~

\ EXISTING \BUILDING \

/~ ~ 1 \

Ni ' ~ ~ \E~~~F~ \ \

exisnNc ~ \BUILDING

ex~snrio \ ~ ~BUILDING ~

ewsnNcBUILDING EXISTING ~

BUILDING ~ \

EXISTING \ ~/ BUILDING ~~~ \ EXISTING 1 ~

BUILDING

~/ EXISTING ~ \BUILDING 1

~ EXISTING \ 1 ~BUILDING

\ \~ ~~~~ \ EXISTING '~ 18~~~~ BUILDING

~NsEXISTING \\O~

Ep371~, \ BUILDING 1 \BUILDING . A

V• ~~ EXISTING \\•A BUILDING ~ ~

EXISTINGBUILDING ~

EXISTNIG \ \~g7~, BUILDING \BUILDING 0

\~~ \ \

~~ APN: 5438/021exisnNc ~ \ \BUILDING

\ ` ~EXISTING \ \

~ BUILDING Q \ ~~

E7(ISTIPIG \BUILD~WC

~\ ~ \ Q~~ \

~ NEW COMCAST ANTENNA AREA,\ / ~ SE~ENLARGED SfTE PLAN: \~

ewsnric ` \BUILDING ~ \ 1

/ \ •

ex~snr~c ~ ~eu~~nrrc ~ ~ ~/ ~ ~ ~ ~asrr+c \ I

e~~narc

Rp~N% ~ ~ \e~i ~ ~ I~ ewsnNc eu~a.on~c/ ~ BUILDING \ \ \ 1

/ ~ ~ \\ E%ISTING

BUILDING

/ewsnNc \ `~" eui~ar~c ewsnNc \ \ ~\\ ^ ~\ eui~aNc

NORTH

0 1S 30' I SCALE: 7" ~ 30'-0' (24x78)

IOR) 112' ~ 30'-0' (11:171

ISSUE STATUSREV. DATE ~ESCRIPTpN BY

A 05!10/17 90%CONSTRUCTION AS

0 OSl1&77 100%CONSTRUCTION CM

~.'~JW I R E L E S S

SO15 EXOREH~Y PUCE, STE. 150BIWr~GO~Cs~]t ]2

Bt9.]M.11l6

PROPRIETARY INFORMATIONTHE IIiOR1UTpN COMTNMED IN THtl SET OFDiUYANGS iS vROPRET~RY t G011f bENTNL TO

VERIZOM WIRf1E36

♦NV USE O0. D1SCl O5URE OT1ER TMAM h5 RRFUTES TO VERIZON WIRELEBB p SfRICRY

PROM&fED

thO

W ~

U Qd

\~/ ~ ~ Q~ W 2W Z d

~ W W

~ ~ga va

U = ~~/~ 0 V m

1 ~ V YV ~

Q ~O

I~Js~p q~

Es,o , ~~* Rya w,~:`x~„

\N .'.~1~

\ TFOF q~ ~j~l

=~iiii// O6.t2•t7DATE:

c~DH-

W ~

~ Z o o W v0

LLI ~ j z of z v

~ 0 Q ~ ti rn

Z O O QQ o Q U

Z ~ ~ ZO

U Z ~ ~ ~ my~ ~z w m a~

~ V ¢ ~ Z NZO ~ Z ~ NNl.L ~

~ N c") O

OU

SHEET TfTLE:

SITE PLAN

A-1

ISSUE STATUSREV. DATE DESCRIPTpN 87

A 05/10M7 90%CONSTRUC110N AS

0 OSl16H7 tOp%CONSTRUC710N CM

~.' ~ JW I R E L E S S

SO15 SHgtEM~M PUCE, BTE. 150BIJI OEGO, CA p11]3

81A1]63188

PROPRIETARY INFORMATIONTHE IIFOHMNTgN CONTRINFD IN THlS SET OFORAWIHG515 VROPRETARY 8 GONfIDENTlCL TO

EXISTING BUILDING

VERIZOH YARELESS

~M1'USE OR DISCLOSURE OTNE0. TNAN ASRRELATES TO VEWZON NIRELE43IS STRICTLY

PROI~BIfEO

EXISTING BUILDING

/~ /\ ~EXISTING BUILDING -'~ ~ O~

\

W

n, v aV/ > Q

~ wiW Z d

~ y W WU ~

F ~~ y Q =

~ v va

O~F

~

0 ~ m

~ U ~

aNOT USED scn~

3N.TS.EXISTING BIILBOARO ~ ~

NEW COMCAST ANTENNAAREA, SEE ANTENNA LAYOUT:

~i~~2 3A-2 eAe M2

EXISTING BILL80ARD \ 12~ 3~~' ~~MAX. OMNI ANTENNA O.C.

//////

~~~,~9~~' ARCy/T ~~~ V •• ~•. E~~~

~ /

,`) ., . ~ ESTO TZ'.POVbIA'

EXISTING BILLBOARDVERTICAL WF BRAgNG

I

~~ ~% l~' ~

~ * ' ncn wei .ao-n 't A~N .' Q\1'~ —

\/..

'TFOF pL~ %'~~~iii~ ~ os-iz-n

NEW HORIZONTAL UNISTRUTS2

~3

DATE

(2) TOTAL, (1) TOP 8 (1) BOTTOM p ~ ~

F~—Q

NEW COMCAST 5d61 OMNI ANTENNA, - j ! ~ ~ ~ ~ ~(2) TOTAL, (1) MOUNTED TO ExISTINGVERTICAL BILLBOARD BRACING /' ~ lZ O~ O j

i 2M M ~ / NEW COMCAST 5d81 OMNI ~ ~ O Q ~ r~~ ~ > Z ~ ; Q

/

~ ~ANTENNA, (2) TOTAL, (1) MOUNTED M M / Q O Q p Q U

ONEW COMCAST LTE OMNI ~

TO NEW VERTICAL UNISTRUT ~

/

Z OO U p O O

ANTENNA, (t) TOTAL, MOUNTED TONEW HORIZONTAL UNISTRUT (TOP)

NEW COMCAST GPS ANTENNA,(t) TOTAL, MOUNTED TO NEW ~ Z

~/

~ ~i ~ ~ N 7 UU Z ~ (n ~ ~ N

1 1

~ ~

HORIZONTAL UNISTRUT (TOP) ~"~ '~ ~

/

W c m ~ O Z Z

- NEW COMCAST MACRO GATEWAY ~ ~RADIO, (1) TOTAL, MOUNTED TO ~

~~

O Q Z m m ~~ Q ~ ~ rn

E%ISTING CANVALK

~NEW HORIZONTAL UNISTRUT (TOPj / ~

\ ~ O ~ z ~ N- NEW COMCAST GROUND BAR,

MOUNTED TO NEW HORIZONTAL G~~ O~ ~ ~

~ ~ ¢ ~UNISTRUT (BOTTOM)

EXISTING BUILDINGN U ~

U

SHEET TITLE:

~ ENLARGED SITE PLAN &

~

,ANTENNA &EQUIPMENT PLAN

NORTH i NORTH

A~2° 6~~$`"`E: ,rz~.,~-0-,~`='e,° ~' s "`~: „°~.,~-0'`~,'3e,ANTENNA LAYOUT 2 ENLARGED SITE PLAN 1,oR, ,,.-.,.-0-,,,x,,, (OR) 1H6'~1'-0'11x17)

TOP OF NEW COMCAST ANTENNASELEV. APPROXIMATELY 71'-0"

~ RAD CENTER OF NEW COMCAST ANTENNASELEV. APPROXIMATELY 70'-0"

~ TOP OF EXISTING BILLBOARD~'I ELEV. APPROXIMATELY 69'-0"

EXISTING BILL80ARD

EXISTING BILLBOARDPLATFORM

EXISTING BILLBOARD i

NEW POE CAT 6A —DC OUT TO GW (10)

EXISTING BUILDING

~J~. TOP OF EXISTING BUILDINGELEV. TBD.

SOUTHEAST ELEVATION

DISCLAIMER

THE ELEVATION HEIGHTS SPECIFIED W THIS RECORD DRAWING AREBASED UPON INFORMATION GATHERED DUWNG 7HE SRE VISITAND/0R AVAILABLE DOCUMENTS. THE NEW COMCAST OMNI AfiIENNAINSTALLATION WILL NOT PROTRUDE ABOVE THE EXISTINGSTRUCTURE HEIGHT NO MORE THAN 24" - 26'. THE ARCHffECTASSUMES NO RESPONSIBILITY FOR THE ACCURACY FOR ANV ERRORSOR OMISSIONS THAT MAY HAVE BEEN INCORPORATED MTO R PS ARESULT OF INCORRECT WFORMATION PROVIDED. PARTIES REIV~NGON THIS RECORD DOCUMENT ARE ADVISED TO OBTPIN NJ Al LETTERFROM A IJCENSED SURVEYOR FOR VERIFICATION OF RS ACCURACY.

~— NEW COMCAST ANTENNA AREA,/ SEE ANTENNA LAYOUT:

2

ELECTRICAL METER

0 1.5 3' S' SCALE: 316" ~ 1'-0'

(OR) 3/32' ~ 1'-0" 1

TOP OF NEW COMCAST ANTENNASEIEV. APPROI(IMATELY 71'-0"

}~ RAD CENTER OF NEW COMCAST ANTENNASELEV. APPROXIMATELY 70'-0^

TOP OF EXISTING BILLBOARDELEV. APPROXIMATELY 69'-0'

EXISTING BUILDING —

EXISTING BUILDING

TOP OF EXISTING BUILDINGELEV. TBO.

~_

2 I SOUTHWEST ELEVATION

NEW COMCAST ANTENNA AREA,SEE ANTENNA LAYOUT:

EXISTING BILLBOARD

EXISTING BILLBOARDPLATFORM

EXISTING BILLBOARD COLUMN

NEW PoE CAT 6ADC OUT TO GW (10)

4 1.5 3' S' I SCALE: 3118" ~ 1'-0" (24:38)I

(ORI 3/32" ~ 1'-0' (11x171

ISSUE STATUSREV. DATE DESCRIPTpN BY

A OSI10/17 90q CONSTRUCTION AS

0 OSH&17 100%CONSTRUCTION CM

~, I JW I R E L E S S

5015 SNOftEHAM VLAGE, STE. 150SIJ1 O~GO, CA 9f111

819.'l36~188

PROPRIETARY INFORMATIONiNE IIFORMATgN CONTNNFD IN TMIS SET OFDRAYIING515 GROPRET~RY i GONiIDEMM~ TO

VERIZON WIRElE35

AMY USE OR 013CLOSURE OT51ER THAN AS RRELATES TO VERIZON WIRELESS p STRICTLY

PROHIBRED

chO

W ~

V a

V~ ~ Q~ ~

W Z J~ W W

~ `~ 5y QZa va

U ~ ~~/~ ~ U m

1 1 V YV ~

QO

////iii i~l~~56~ ARC

~ ~' ~• Esro i2 roaavr

*' RCN wr~~ian,~~N r Q1~~ ~'

TF~F qL~ ~jl~~~~~i//// W 12-17

DATE:

d'

Q

ll_1 ~~ ~ o ~I"_ Z O O W 7

O c~

w ~ ~ Z ~ Z m~ Q ~ t~

Q O O ¢ o a~Z ~ Z ~ ~ ~OzV Z ~ N ~ ~~w ~ o mU

O ~ Z m m vai~Q LL~ U ¢ ~ z ~z

O ~ ~ ~ N~

N N V ~~ OOU

SHEET TITLE:

SOUTHWEST 8SOUTHEAST

ELEVATIONS

A-3

AMPHENOL ISSUE STATUS7553893 NEW 5 dBl OMNI ANTENNA W/ - - --

STANDARD MOUNTINGLENGTH: 28.7"

REV. DATE DESCRIPTION BY

p os~~om sow coNsrRucnoN as

0 05116717 100% CONSTRUCTION CMWEIGHT NEW MOUNTINGW/O MOUNTING BRACKET-XSL9256087BRACKET; 1,1LBS

PLAN VIEW

~~~ JW I R E L E S S

37~ ~ ~• 5015 SHOREHAM PUCE, STE. 150

OMNI ANTENNA O.C. sui geco, c~ eziu

819.]]6.]]86

PROPRIETARY INFORMATIONTHE IIFORMATION C011TNNFD IN THIS SET OFDRRN1NG515 VROPRETIIRY i CONFIDENTNL TO

NEW LTE ANTENNA

VERIZON WIRELE96

ANY USE OR DISCLOSURE OTI~R THAN AS RREUTES TO VEftlZO~N~ R£~LESS IS SiRILTLYQ

#80010846 MOUNTED TO NEW 5 dBl OMNI ANTENNA

Z NEW 5 d81 OMNI ANTENNA W/i~ Z STANDARD MOUNTING

L-MOUNTING BRACKET W/ STANDARD MOUNTING

ry aZ O

p NEW GPS ANTENNA#472632A(FAWO)R150R W ~MOUNTED TOL-MOUNTING BRACKET

V Q— d

TOP OF EXISTING BILLBOARD ~ ~ Qn-a.t

~ W 2

~ W aTOP OF EXISTING BILLBOARD --~

Z

~tii W W

~~ ~ ~ g~NEW UNIVERSAL MAST CLAMP V U d

NEW HORIZONTAL UNISTRUT W/ ~ O ~-~ KWIK WASHER 8 1!2"0 HEX BOLT 0 U m

~— NEW STAINLESS STEEL MB V

a p n ~

V~ U

(TOP) U Y

~SCALENOT USED ~BOLTS GW NUTS 8 WASHERS

~

N.7.s. ~ i (STANDARD MOUNTING)~

NEW SIMPSON A24 (OR EOUAI.) WI1/2" 0 A307 MB (BEHIND) AND ATTACH

Q~P

~ ~ TO EXISTING HORIZONTAL ANGLE

~ Imo- NEW ALUMINUM TUBE o d'~ I (MOUNTING BRACKET- XSL9256087)

„~~~~(SHOWN HIDDEN) ~ ~ ~ EXISTING HORIZONTAL ANGLE (TOP)

~~\ A R~yirNEW .5m DOWNLEAD

, , , ~

/- NEW HORIZONTAL UNISTRUTW/ KWIK WASHER & 1/2"0HEX BOLT (BOTTOM)

'~I~~`'~~O ••• • '. (~~~~

~'v ~ ~o tl

Esro rzrorowr

NEW PIPE 2 STD --~,y~ ~ N• AEN wk 4b~~i

NEW MOUNTING

•:e11

\~~ w BRACKET-XSL9256087 T '•.. .••' 0~~~~FOF~ ? NEW PIPE 2 STD AL\ ~~J~~~iii~/~ I NEW HORIZONTAL UNISTRUT t-

`v ~

(BEHIND) NEW TEKTEUC KONA 410T MACRO GATEWAV~

pg.i Z.i~onTE:(TOP)

~ ~ o~ Z

~

RADIO #70004250-A ~

~ - NEW PLASTIC SLEEVE ~ - - NEW GROUND BAR, ~~I

Ja

4#G811448NOKIA (INSTALL G~ W ~ ~

~ I NEW PIPE CLAMP (TYP.) APPROXIMATELY 7'-0'~

~ o ~

~IBELOW RADIO) CO ~

~ Z O o v

w ~' ~ z ~ Z o~i

~ ¢ ~NEW N TYPE CONNECTOREXISTING FiORIZONTAI ANGLE

%O O Q U0

~

~ ~i

- - — -- - _o ~(BOTTOM)

_ ~-Z ~ U O Qo z a z°~ ~ ~= ~ ~~

~ ~ ~ NEW 1/70 A307 M.B. THROUGH ~ ~ m d' ~ Z Z~ ~ EXISTING HORIZONTAL ANGLE Q ~ Z m m ~

~~

II

I I ~~ Z~ Ntn

I LL ~ ~ j ~NEW MOUNTING BRACKET-XSL9256087 — ~; 42~ ~ ~ N U ~

i_ ~ VERTICAL ANGLES O.C. ~ O

OU

SHEET TITLE:NEW HORIZONTAL UNIS7RUT(BOTTOM) EQUIPMENT DETAILS &

SPECIFICATIONS

~~SIDE VIEW W/O MOUNTING BRACKET SIDE VIEW

SCALE SCALE SCALENOT USED 3 OMNI ANTENNA DETAIL 2 ANTENNA MAST CONFIGURATION~

N.T.3. N.T.S. N.T.S.

TEKTELIC KONA IOT MACRO GATEWAY NOKIA ISSUE STATUST0004250.A 472832A(FAWD)RLSOFZ REV. DATE DESCRIPTpN BVLENGTH: 8.74" HEIGHT: 3.12" a 05~70/t7 90%CONSTRUCnON ASWIDTH: 3.9' DIAMETER: 2.36' 0 OS/78H7 100% CONS7RUCT10N CMHEIGHT: 11.3' WEIGHT: .31 L8S

WEIGHT 11,33 LBS

MOUNTING BRACKET~~\

-~-

1~ ~ PLAN VIEW _

~ JW I R E L E S S

PLAN VIEW3.81' 8.74"

5015 SHOREHAM PLACE, BTE. 150S/W gECA. CA 9]121

p O O2.36"8

81Y.]]B.1186

PROPRIETARY INFORMATION— —NEW GPS ANTENNA #472832A(FAWD~tL50F2 THE IIFORWADH CONTNMFD IN TMLS 9ET OF

~ MOUNTED TO L-MOUNTING BRACKET DfUYANG5IS P EOPPET~ EL~CONiDElRNL TO

NEW L-MOUNTING BRACKET, ~Mr use on osc~osuae or~a rw~ ~s rtRELATES TO VES020M MANELESB p $TRILiIY

#TW-MOUNT-WIFEL+I vao~etrEo

~0 O

OO W O)

w

aNEW SCHEDULE

W ~40, 2'0 x 10'-0" ~ Q

~— O_ - #P K040GD ~ W Z J

~ D. ~ Uo n ~ ~g

~_~~~ ~~

SIDE VIEW

I/~~

\ / FRONT VIEW ~

FRONT VIEW SIDE VIEW a zQ U a

r 1 ~ O p

v/~~~ 0 U~

U m

NOT USED SCALE „/~ RAD10 DETAIL SCALE

4 GPS ANTENNASCALE

~

- V

aN.T.S. N.T.S. N.T,S.~/

MICROSEMI POE 60 WATT OUTDOOR MIDSPAN KATHREIN oPD-9507G0

OUTDOOR MOUNTING BRACKETPD-0UT / MBK

80010846

HEIGHT: 8"DIAMETER: L2"WEIGHT: .461BS ////~~~~~~

A RCy~rMIGROSEMI MOUNTING BRACKETPD-9501G0 PD-OUT / MBK

LENGTH: 5.90" 7.04"

~~ ~

(I~~~S~O'1~.~,~'. •~~ :~~\~

ESTO T. POPOWY \\ * , z~.ea ;

WIDTH: 2.75" 7.16" ~ REN wAi ~-J0.~)

HEIGHT: 8.42" 9.41"

WEIGHT 1.65 LBS 3.53 LBS

~~~

~'z 0

PLAN VIEW ~N .'~Q'+,—Z.~TF~F A~' ~~I~~~'~i~~//PLAN VIEW ~ os-t2-n

WI MOUNTING BRACKETGATE:

c~0Hr Q

w ~7.04" CO ~ d ~

~' Z O pMOUNTING BRACKET2.75' 1.16"

MOUNTING 5.90"

r ~J,J Q O ~

w ~ ~ Z ~ Z ~~BR4CKET O Q ~ ti J Q

m Q O O Q o aUNEW LTE ANTENNA Z ~ () O ~Z O

~') ° ~~ ° C~ ~ti80010846 MOUNTED TOL BRACKET

Z

~O -MOUNTING

U Z ~ ~ ~ ~m U

~ ~ Z~Z w °°O ~Y NEW L~AOUNTING BRACKET, - ~ Q ~p m ~

Q ~Q #NJ-MOUNT-WIFI-L-H\

~ (~ ~

Z ~ Z~ ~Ci Q

~ ~~Z \_J ~ In Q h-N ~~ O

j OO

CJ ~SHEET TITLE:l6 0 o LG

- NEW SCHEDULE 40, 2'0 x 70'-0' LONG MAST NP-K049C D EQUIPMENT DETAILS ~SPECIFICATIONS

SIDE VIEW FRONT VIEWW/MOUNTING BRACKET W/ MOUNTING BRACKET FRONT VIEW SIDE VIEW

A~~•SCALE SCALE

SCALENOT USED 5 poE DETAIL 3 LTE ANTENNA 1N.T.3. N.T.S. N.T.S.

ISSUE STATUSUTILITY GENERAL NOTES:EXISTING OUTFRONTBB REV. DATE OESCRIPTpN BY

1. ALL NEVJ GROUNDINGS FOR ELECTRICAL ROUTE ELECTRICAL MAIN PANEL A O5n OH7 90%CONS7RUC710N aSMUST BE DONE PER CEC, NEC &LOCAL BUILDING & WI B CKT POSRION LOAD CENTER

0 OS/18/17 100% CONSTRUCTION CMSAFETY REQUIREMENTS.

2. ALL NEW CONDUIT FROM ELECTRICAL PANEL TOCOMCAST RADIO MUST BE EMT (INDOOR) 8 RGS(OUTDOOR) CONDUITS. INSTALL WEATHERPROOFPULL BOXES AS READ. PER CEC, NEC 8 LOCAL BLDG. ~& SAFETY REQUIREMENTS 8 MUST HAVE TRAFFIC EXISTING 90A/2P FUSE DISCONNECTCOVERS.

3. ALL NEW PULL BOXES MUST BE HOT-0IPPEDGALVANIZED AND WEATHERPROOF

4. ALL NEW WIRE SPLICES PULL BOXES DONE PER CECEXISTING LOAD CENTER W ~ R E L E S S

8 NEC.I

WI 8 CKT POSITIONS

5. FIELD VERIFY EXACT ELECTRICAL CONDUIT ROUTE. y~q~~p SOiS LHOREH~M PUCE, SiE. 150BAN pEGO, CA Y~1T3

-- DISCONNECT 61NSTALL (1) NEW 20FU1P B6. COMCAST EQUIPMENT, OUTLET AND CONDUIT NEED BREAKER AT CKT 8 (TO BE SAME STYLE

D~?M~i~

PROPRIETARY INFORMATIONTO BE LABELED &ALL CLEARANCE FOR ELECTRICAL 8 KAIC RATING AS EXISTING BREAKERS)EQUIPMENT BY CEC 8 NEC. rHE uFOR~unox conTaNFn iH rNa sEr or

DRAN7NG515 VROGRETAXY i CONFIDEIITWL TO

7. NEW GROUND RODS MAY BE USED FOR SITE ~~ON YARELE56

GROUNDING IF DESIRED RESISTANCE IS ACHIEVED. ~ NEW ~IY~O RGS-Y S~Y,~M~Y GROUND, ANY USE OR DiSCLOSUHE OTHER TMAM ASRv COPPER THHNRHWN-2 RELATES TO VEigZON N1RELESS IS STRILILY

8. CONTRACTOR TO INSTALL UTILITY CONDUIT vnowe~reo

(LATERAL). NEW COMCAST

9. UTILIN POINTS OF SERVICE AND WORK /MATERIALSPoE INJECTOR

SHOWN ARE BASED UPON PRELIMINARY ~INFORMATION PROVIDED BY COMCAST ~CONSTRUCTION TEAM 8 COMCAST CONSTRUCTION ~y ~MANAGER /AND OR LANDLORD'S MANAGEMENT V QCOMPANY,4ND ARE FOR 81D PURPOSES ONLY. d

10. CONTRACTOR SHALL COORDINATE WITH COMCAST

G

~ ~ QCONSTRUCTION TEAM & COMCAST CONSTRUCTION ~ W 2MANAGER /AND OR LANDLORD'S MANAGEMENT W Z d

~

COMPANY FOR FINAL AND EXACT WORK /MATERIALS M w ~ jREQUIREMENTS AND CONSTRUCT. CONTRACTOR ■ ~ U pSHALL FURNISH AND INSTALL ALL CONDUITS, PULL f r JROPES, CA9LES, PULL BOXES. CONCRETE NENCASEMENT OF CONDUIT (~F REQUIRED), Q ~ aTRANSFORMER PAD, BARRIERS. POLE RISERS.

VTRENCHING, BACKFILL, PAY ALL UTILITY COMPANY ~ ~FEES AND INCLUDE ALL REQUIREMENTS IN SCOPE U ~ ~OF WORK.

J0 m

~NOT USED SCALE 4 ELECTRICAL NOTESSGALE 2 Q

N.T.8. N.T.S.O

r

SYMBOLS

GROUND ROD WITH ACCESS •

- - - - -EXISTING BUILDING EXTERIOR WALL

- - - - - - - -/~ ED A R

COMPRESSION, CLAMP, OR DOUBLEHOLE LUG TYPE GROUND CONNECTION

(I~~S .••••~yir~•..E~,~\

e XIT GROUND ROD14~~ G~'

~ EXOTHERMIC CONNEC170N CADWELD) TO \ ~ ssro r. aoao~wGROUND ROD

GROUND RING AND COMPR SSION TO` * ~GROUND HALO PEN W~L~]Pti~ ~

o~ DISCONNECT SWITCH _ ~_ GROUNDING WIRE, DASHED LIRE INDICATES ~- EXISTING~i

~N '~~~~1~~~M UTILITY METER

UNDERGROUND EXISTING CONDUITS 6 WIRES - ' LIGHTS TIMER T •.,, ,.• Q-p ~I— T — TELEPHONE LINE, DASHED LINE INDICATES

~c? ~F A~- /~~

CIRCUIT BREAKER UNDERGROUND EXISTING — ~ EXISTING OUTFRONTBB ~~~~~~~ ~~Z~~~once•— C — COAXIAL CABLE, DASHED UNE INDICATES BUILDING WALL T

EXISTING OUTFRONTBBLIGHTS TIMER ELECTRICAL MAIN PANEL

~FUSE UNDERGROUND '15 -NEWCOMCAST ~—A— ANTENNA COAX PoEINJECTOR

QG GENERATOR 2~,

~3DETAIL REFERENCE

w ~

S LIGHT SWITCHDETAIL N0.2 ON SHEET E3 - -- EL CTIR CAL METER ~ z o 0

NEW COMCAST ~ p W chi

w20a~P PoE INJECTOR ~ uJ ~ Z rn Z v

EXISTING OUTFRONTBB ~ ~ ~ Q ~ p Q UQABBREVIATIONS ELECTRICAL MAIN PANEL - Q Q Q ~

W18 CKT POSITIONS ~~

~ Z O U1 ~ ~OLOAD CENTER NEW 1l2"0 RGS - 2 Mil, 1 M72 GROUND, F— 0 ~ V ~y ~

ACCA ANTENNA CABLE COVER ASSEMBLY IGR INTERIOR GROUND RING (HALO) COPPER 7HHN/iHWN -2 V Z ~ ~ ~ ~ ~AWG AMERICAN WIRE GAUGE MIGB MASTER ISOLATED GROUND BAR w ~ p to U

mBTCW BARE TINNED COPPER WIRE (N) NEW (PROVIDE AND INSTALLMO ~ ~ ~ Z Z

C CONDOR UNLESS NOTED OTHERWISE)-

O ~ Z pwp pmp ~

LLQCIGBE COAX INSULATED GROUND PCS PERSONAL COMMUNICATION SERVICE EXISTING ~ Q ~ F— ~ -

BAR EXTERNAL PDC POWER PROTECTION CABINET ELECTRIGP.~ METER ~ U C/~ ~ z NCO CONDUIT ONLY PRC PRIMARY RADIO CABINET NEW COMCAS7 #6 GROUND COPPER

~ Z ~

DWG DRAWING PVC POLYVINYL CHLORIDE CONDUIT TO BE BONDED 70 EXISTING~~~

H

EMT ELECTRICAL METALLIC TUBING RGS RIGID GAWANIZED STEELCOMCAST GROUNDING SVS7EM - ~ N Q

NEW OR EX. EXISTING RWY RACEWAY ~ ~GEN GENERATOR S.L.D. SINGLE LINE DIAGRAM

Gfl GROUND FAULT CIRCUIT INTERRUPTER TMLP VERIZON WIRELESS WIRELESS,~

~~ ~GRND GROUND LIMITED PARTNERSHIP ~ ~

SHEET TITLE:GPSGR

GLOBAL POSITIONING SYSTEMGROWTH

TEL TELEPHONE G—G—G VIEW OF EXISTING OUTFRONTBBT,P n,P~CA~ _ ~ ELECTRICAL MAIN PANEL

WP WEATHERPROOF EQUIPMENT EXISTINGOUTFRONTBB 1-LINE DIAGRAM 8 NOTESGROUNDING SYSTEM

E~1SCALE SCALESYMBOLS 8~ ABBREVIATIONS 3 1-LINE DIAGRAM~

N.T.S. N.7.5.

ISSUE STATUSREV. DATE OESCRIP7IDN BV

O O A 05/10/t7 90%CONSTRUCTION AS

0 05/76117 700%CONSTRUCTION CM

/ 3l8 S.S. BUTTON , } -- ~ ~ ~ ~ ~ ~ ~ ~~

'~17

HD SCREW ~ ~ ~ ~~~ ~l1 (/ I (~~ I` ~~ ~ ~ ~ ~ ~ OMNI ANTENNA O.C.

W I R E L E S S

- R4150A41NSULATOR\ 2000V RATING 901 EHAM ►IACE, .150

BANr~CA~CA~1T]

WBKT1 5.5. O -- 00.312 O ( 1LTE BACKHAUL ANTENNA GPS 472(32A F; WD

PROPRIETARY INFORMATIONTHE IKORWTDN CONT/JNED IM TNIS SET OF

DMWING515 FROPRETARY 1 CONFpENTNL TO

WALL BRACKET TYPE #800 108436 8' OMNI RL50 FZ NOKIA

54b1 ONMI RF ANTENNA FORREMAINING COMCAST SITES

VERIZON WIRELESb

ANY USF OR DISCLOSURE OTHER THAN AS RRELATES TO VERIZON WIRELES8153TRICTLYCONFIGURATION DESIGN scw~e

4N.T.3,

~ TOP OF BILLBOARD

vaoHlertev

1. ALL DETAILS ARE SHOWN IN GENERAL TERMS. ACTUAL INSTALLATION AND CONSTRUCTION MAY VARY DUE TO SITE SPECIFIC CONDITIONS. i

2. GROUND ALL ANTENNA BASES, FRAMES, CABLE RUNS, AND OTHER METALLIC COMPONENTS USING GROUND WIRES AND CONNECT TO SURFACE MOUNTED BUS ~ - ~BARS, FOLLOW ANTENNA AND BTS MANUFACTURES PRACTICES FOR GROUNDING REQUIREMENTS. GROUND COAX SHIELDS AT BOTH ENDS AND EXIT FROM W ~TOWER OR POLE USING MFR'S PRACTICES. V Qd3. ALL GROUND WIRE SHALL BE GREEN INSULATED WIRE ABOVE GROUND.

RF ANTENNA COFJ( JUMPERS - ~ a~

d'4. CONTR,4CTOR TO VERIFY AND TEST GROUND TO SOURCE. GROUNDING AND OTHER OPERATIONAL TESTING WILL BE WITNESSED BY A NOKIA REPRESENTATIVE. W =W Z d

~

5. REFER TO DIVISION 16 GENERAL ELECTRIC; GENERAL ELECTRICAL PROVISION AND COMPLY WITH ALL REQUIREMENTS OF GROUNDING STANDARDS. TeK7euC RnDlO L7E BACKHAUL ~ y W WU OGROUND POINT p6 AWG SURGE PROTECTION / F

6. CONTRACTOR TO ABIDE BY ALL NOKIA SAFETY STANDARDS DURING SITE CONSTRUCTION. ~ H (~/)BILLBOARD BRACING ~ _a URF OMNI ANTENNA d7. CONTRACTOR SHALL REFER TO NOKIA STANDARDS FOR GROUNDING CONNECTIONS 8 INSTALLATION METHODS. SURGE PROTECTORS ' ~PoE SURGE PROTECTOR NEAR GW - ANTENNA 0 AND l J ~ O

S. ELECTRICAL CONTRACTOR TO PROVIDE DETAILED DESIGN OF GROUNDING SYSTEM, AND RECEIVE APPROVAL OF DESIGN BY AUTHORIZED NOKIA AN7ENNn ~ V O U JREPRESENTATIVE, PRIOR TO INSTALLATION OF GROUNDING SYSTEM. PHOTO DOCUMENT ALL CADWELDS AND GROUND RING. mU y

~9. NOTIFY CONSTRUCTION MANAGER IF THERE ARE ANY DIFFICULTIES INSTALLING GROUNDING SYSTEM DUE TO SITE SOIL CONDITIONS. GROUND BAR INSTaLLED Q ~

APPROXIMATELY 1FT BELLOW RADIO — p6 AWG GROUND10. GROUNDING ROD NOTES (WHERE APPLICABLE) TO SITE GROUND ~11. ELECTRICAL CONTRACTOR SHALL ORDER GROUND RESISTANCE TESTING ONCE THE GROUND SYSTEM HAS BEEN INSTALLED; A QUALIFIED INDIVIDUAL.

UTILIZING THE FALL OF POTENTIAL METHOD, SHOULD PERFORM THE TEST. THE REPORT WILL SHOW THE LOCATION OF THE TEST AND CONTAIN NO LESS THAN9 TEST POINTS ALONG THE TESTING LINE, GRAPHED OUT TO SHOW THE PLATEAU.

~/iii ~~~►12. POINT GROUND TEST OR 3 POINT 62 % TESTS WILL NOT BE ACCEPTED AS ALTERNATIVES TO THE AFORE MENTIONED GROUND TESTS. TEST SHALL BE (~/USED. A R~Hc~

PERFORMED WHILE THE COUNTERPOISE IS ISOLATED. TEST SHALL BE PERFORMED WHILE THE COUNTERPOISE IS ISOLATED FROM THE A/C SYSTEM GRIDS .,.r~~\\AND EXISTING COMMUNICATIONS FACILITY.

1'~I~~,

v ~ ~:\, es.o .nwnow~ •• A~Nw~~~,~SCALEGENERAL GROUNDING NOTES 3

•~Q 11N.T.B. \N

~ )' '•. .•' QQ''~__

1. THE DESIGN OF THE ANTENNA MAST CONFIGURATION CALLS FOR A TWO (2) INCH DIAMETER, 10-FOOT MAST WITH THE GROUND BAR AND ANTENNAS =FOF AL /l~MOUNTED ON IT IN A SET RELATIONSHIP TO THE RADIO, AND GROUND BAR. ~~~~~~~ W-~ 2•~~oaTE~2. THE MAST, RADIOS AND ANTENNAS WOULD BE THE SAME NO MATTER WHAT TYPE SITE WAS SELECTED FOR THE INSTALLATION. #6 AWG FLEX FROM 70P GROUND BAR -~- —~ ~

H3. THE TEKTELIC GATEWAY/RADIO UNIT IS MOUNTED ON THE ANTENNA MAST AT ABOUT 24" TO 36' A80VE THE BASE OF THE ROOFTOP OR AT MID SPAN ON ~SPECIFIC SITE TOWER.NEAREST GROUND TERMINATING POINT - ~ w ~ ~n

~ ~ p

4, THE HARGER GOUND BAR IS MOUNTED 12 INCHES BELOW THE RADIO TO PREVENT INDUCTION BUILD-UP DURING A LIGHTNING STRIKE. THE SURGEPoE CAT 6A DC OUT TO GW (70)

_O O

~ w Q o ~PROTECTORS FOR THE GPS, LTE, AND BOTH RF ANTENNAS ARE MOUNTED INTO THE ANTENNA PORTS ON THE BOTTOM OF THE RADIO.

~ Q ~ ~ > Q5. THE RF JUMPERS ARE CONSTRUCTED WITH THE SURGE PROTECTORS BUILT IN. THE ENTIRE RF JUMPER IS FULLY WEATHER-PROOFED FROM PoE SURGE PROTECTOR Q OO O Q p Q UCONNECTOR TO CONNECTOR. THEIR GROUND CABLES ARE CRIMPED TO THE GROUND RING OF THE SURGE PROTECTOR AT THE RADIO END, AND ARE ti~giN nC POWER SOURCE -~ ~ AT PoE INJECTOR Z p ~ Oz

ATTACHED TO THE HARGER GROUND BAR USING #10 AWG TWO (2) HOLE LUGS. THE GROUND CABLES ARE if10 AWG. \ ~ p ~ N ~ ~\ OUTDOOR PoE INJECTOR V Z ~ N ~ m6. THE FOUR (4) ANTENNAS ARE MOUNTED ABOVE THE RADIO, WITH THE TWO RF ANTENNAS MOUNTED, WITH ONE (1) ON EACH SIDE OF THE MAST USING w ~ o U

ZTHE S200 COMMSCOPE 24' STAND-OFF BRACKETS.~ Z m m120vAC IN TO PoE INJECTOR O ~7. THE LTE AND GPS ANTENNAS ARE MOUNTED ON THEIR RESPECTIVE MOUNTING BRACKETS AT A LOWER HEIGHT, APPROXIMATELY 2" TO 4" BELOW THE ~ U ¢ ~ Z m zBOTTOM BAR OF THE 5200 COMMSCOPE MOUNTING BRACKETS,

~ ~ Z N ~Q Q8. THE COAXIAL ANTENNA JUMPER CABLES ARE ATTACHED TO EACH OF THE ANTENNAS, WITH THE WEATHER PROOFING SLIDE-UP COVERS ATTACHED AS N Qj Q ~INSTRUCTED. N U ~

9. THE TEKTELIC RADIO IS GROUNDED TO THE HARGER GROUND BAR USING A TWO (2) HOLE #6 AWG LUG OFR CONNECTION TO THE RADIO AND A ~UTWO-HOLE LUG FOR ATTACHMENT TO THE HARGER GOUND BAR.SHEET TITLE:

10. THE HARGER GROUND BAR IS GROUNDED USING #6 AWG FLEX GROUND CABLE TO THE POINT OF LOWEST POTENTIAL ON THE TOWER OR DIRECTLY TOSCHEMATIC GROUNDING PLANTHE TOWER GROUND AT THE BASE OF THE TOWER.

8~ DETAILS11. FOR THE BILLBOARD, THE GROUND POINT SHOULD BE LOCATED AND VERIFIED 8Y SITE SURVEY AND THE GROUND CABLE ATTACHED AT THAT POINT.

G~~SCALE$CASECONFIGURATION NOTES 2 SCHEMATIC GROUNDING PLAN 1

N,T.S. N.T,S.

Documents

Atijera, Evamarie (CPC) ~ ~p s X11?(~f~(,(,~ - SF Planning