Magnetic heater inspired by energy

www.emolio.com/Magnetic­Heater ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ This is FREE document with much less informations and without technical drawings. For FULL document with technical drawings go to http://www.emolio.com/Magnetic­Heater ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­

­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ This is FREE document with NO much details, like technical (CAD) drawings. For FULL document with technical drawings go to http://www.emolio.com/Magnetic­Heater ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Magnetic heater description The magnetic system is a multi­functional system designed for central heating. This means that it can be adapted to existing central heating systems, as well as different applications. One of the ways the system works is that it heats the water that heats your home. The other option is to heat thermal oil, which then heats the water in the buffer which then heats your home. It is the choice of the user, we must specify that the option of heating the thermal oil brings greater efficiency in spending the energy. The magnetic system is based on the principle of natural law (Lentz law) copper as non ferro metal reacts to magnetic induction by creating heat. This principle has long been used in the auto industry as well as on certain appliances such as air conditioners. Magnetic heating in this application is a new design (construction) for implementing low­energy­use heating systems. The purpose of this document is to use this opportunity (open source) to share, help and encourage consumers to make their own magnetic system, which compared to others is the most effective heating of modern times. We have to state that you need professional help in the construction of the magnetic system. From us you can expect such support, information, training courses, books, parts as well as a complete magnetic heating machine. In our case it is handwork rather than mass production and all profit goes to developing this or any other energy systems that helps you as consumer to use less energy. The durability of the device is only limited to the replacement of certain parts (such as an electric motor), the durability of the other parts is very long­term. The basic machine is running smoothly with minimal maintenance. It is important to note that the current model of magnetic heating works on a three­phase electrical energy motor, and that future systems will be adapted to single phase electromotor. The device is a non­complicated magnetic heating device which has a steel construction to support all parts such as an electric motor (with a difference of power from 1 to 5 kw / h), aluminium disk, magnets, copper cauldrons and the necessary electronics that regulate the turning on and off and it is connected to a thermostat that measures the temperature of water or thermal oil. The principle of operation is based on magnetic induction, so the electric motor runs the aluminum disk in which a number of magnets has been integrated. The field of magnetic induction is created when the disk reaches a certain speed and the copper reacts on that with heating up. So the copper cauldron heats up due to the magnetic induction and the heat is

transferred to water or thermal oil (as already stated in the document). The principle of operation is simple and all of the energy used is by electric motors. Use and efficiency of magnetic heating depends on the existing central heating system where you place the magnetic heating, as well as the square footage of space that is heated. The entire unit of the magnetic heating system runs on low power consumption and can be customized, for instance by adapting the distance between the disk with magnets and the copper cauldron. A larger distance, calls for less power consumption. The user can customize the temperature in relation to personal wishes as to minimal and maximal temperature in the home. Compared to existing systems, magnetic heating uses a minimal amount of electricity and is very efficient when it comes to saving electricity. In addition, please note that the magnetic heater does not require additional maintenance such as cleaning, neither does it create emission of CO2. In other words, the system is 100% functional with minimal maintenance costs and high financial benefits due to the lower electrical inputs . For more details about everything read on ...

­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ This is FREE document with NO much details, like technical (CAD) drawings. For FULL document with technical drawings go to http://www.emolio.com/Magnetic­Heater ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Foreword My personal experience I gained after purchasing our house (240 square meters) in which there was a warming system based on oil fuel. I want to use this opportunity to show you that choosing to install the magnetic heater pays off in one year.; The seller of the house informed us that 2,000 liters of heating oil on an annual basis would be enough to heat the house, but already the first winter season I realized that the heating needs more than double of that. Faced with this fact I reviewed all existing systems and came to the conclusion that it would be profitable to try to make a magnetic system that could reduce the consumption with at least 70%. An additional advantage, and in my opinion an important one, is that the magnetic system is much more healthy than using oil or gas. And so it all began … In the beginning it took me a long time to understand in what way I should address the basic issues, my experiments have led to the development of this heating unit. My search has resulted in a product that is ready for use and is currently the most efficient. Just to mention some of the main points / problems I encountered: ­ copper parts should be professionally welded and safe to withstand the pressure of minimum 3 bar / the copper part that I use can work at 8 bar, ­ finding out what electric motor (kw/h) is best for a certain output in relation to either heating water or thermal oil ­ magnets should be placed under the rules of north / south and alternately, ­ Disk needs to be precise ­ the distance between the disk and the boiler is adjustable, and the same is dependent consumption, etc ... These are all points that you need to pay attention to when making or setting up the system. It is important to call for the support of a professional plumber and electro technician. For all your questions you can contact me … Everything has a beginning and an end, but this project has been one of which I am very glad that despite all the attempts we have managed to make a magnetic heater. And I hope that others will learn from my experience, therefore, do not have to start from scratch, will experience less failures and achieve greater efficiency. In this era of innovation, energy saving is increasingly represented as a major theme. Outdated technologies are replaced with new systems that are adapted depending on the existing suppliers. Users, understandably, are interested in whether an investment will be profitable and worthwhile. We are proud to say that the magnetic heating system is reliable and economical on the long run, plus easy to install and maintain. We can, from personal experience, say that the magnetic system meets all the requirements expected of modern technology era. We have already had our investment paid back, and each new winter is saving on heating. The system is

installed by using the existing hot and cold water pipes. (I like to mention that it is profitable to think about changing to floor and/or wall heating instead of using radiators) , built­in electronics regulate automatic switching the motor on and off which helps save energy. in addition it is an built­in security that the system will not overheat. There is no need for maintenance and cleaning, nor is there exhaust gas in the house. In short we are satisfied, and we want you the have the same experience....

­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ This is FREE document with NO much details, like technical (CAD) drawings. For FULL document with technical drawings go to http://www.emolio.com/Magnetic­Heater ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Parts of magnetic heater:

1. Aluminum disk with magnets 2. Copper boiler 3. Electromotor 4. Construction which holds all parts 5. Electric parts, such as thermostat and on/off switch

­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ This is FREE document with NO much details, like technical (CAD) drawings. For FULL document with technical drawings go to http://www.emolio.com/Magnetic­Heater ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Aluminium disk with magnets

For the disk with magnets we have chosen aluminium, because this material is light, easy to adapt, it can endure the necessary heat of the unit and and it does not deform. When preparing

­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ This is FREE document with NO much details, like technical (CAD) drawings. For FULL document with technical drawings go to http://www.emolio.com/Magnetic­Heater ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Copper boiler

I have chosen copper as the material for the boiler or cauldron simply because copper reacts to magnetic induction. This thermal energy is passed on to water or thermal oil, which in turn are

­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ This is FREE document with NO much details, like technical (CAD) drawings. For FULL document with technical drawings go to http://www.emolio.com/Magnetic­Heater ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Electro motor

The electric motor is the basis of the magnetic heating and responsible for the level of energy use. For this reason I would suggest you choose an engine with an appropriate strength (we

­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ This is FREE document with NO much details, like technical (CAD) drawings. For FULL document with technical drawings go to http://www.emolio.com/Magnetic­Heater ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Construction

The construction can be made of various materials. My experience is that steel and aluminum are the best choice for the reason that the construction should be solid and stable. Stability and strength are important, because the construction should withstand the weight of the engine, the disk, the copper cauldron (boiler) and its content. Another important design feature is that the magnetic heater should have a mechanism, some sort of mobile platform, that enables movement of the motor including the disk towards and away from the copper boiler. So that the user can differentiate according to the desired temperature. In my construction I solved this with a platform that runs threaded.

­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ This is FREE document with NO much details, like technical (CAD) drawings. For FULL document with technical drawings go to http://www.emolio.com/Magnetic­Heater ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Electric parts Electronics allow security for the magnetic heating system by switching the electric motor on and off accordingly. However, the motor could also run constantly if required. Electronics are connected to a thermostat that measures the temperature in the boiler (thermostat can be adjusted to your personal temperature needs) and when the maximum temperature is achieved the motor is turned off and it will start again once the minimum temperature is reached. In my experience the most effective spacing is 10 degrees, so if you set the thermostat to the maximum temperature of 60 Celsius, then the minimum should be 50 Celsius.

­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ This is FREE document with NO much details, like technical (CAD) drawings. For FULL document with technical drawings go to http://www.emolio.com/Magnetic­Heater ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ It is essential to understand This document is based on the desire of the publishers to help all those who want to create their own system of magnetic heating. We are not responsible for the actions of others, nor for their mistakes while building their own magnetic heater. We are also not responsible for possible errors on your existing heating system. Anyone building a magnetic heating system acts at their own risk and responsibility. We can only tell and share our experience with you and thus help to build your own system of magnetic heating. A new way of business (open source) offers us opportunities to develop independently from the other, as well as all those who make us dependent on their products in their personal interest. The magnetic system is an electromechanical device, which means that the safety of the individual that is end­user is of prime importance. It is therefore important that the assembly of magnetic heating is made by professionals in the field of electricity and plumbing, and in making the equipment it is also essential that you have knowledge of mechanical engineering. Therefore, we recommend that you familiarize yourself with the basics listed here and / or consult with professionals. Yours Svetislav Jurisic and Radic www.emolio.com/Magnetic­Heater