1. 13 V 029 ECertified Quality Management SystemCertified Enviromental Management SystemCertified Occupational Health & Safety Management SystemGENERAL CATALOGUE

2. QUALITY POLICY AND OBJECTIVES This catalogue illustrates the range of our standard products. For each product family we indicate the principal features, and sometimes the most frequent applications and the necessary guidelines for a correct application. Our sales personnel are at your disposal to supply more detailed information and our design and development engineers are available to study new solutions to particular applications.All Cembre products comply with Directive 2002/95/CE of the European Parliament and Council dated 27 January 2003 (and subsequent amendment).On 14th December 1990 Cembre SpA Quality Management System was certified by Lloyds Register of Quality Assurance (LRQA) according to ISO 9002-1987 EN 29002 - 1987 BS 5750: Part 2: 1987 for the manufacture of insulated and uninsulated copper crimping connectors. Then on 22nd December 1992 Cembre SpA was certified ISO 9001 for the design and manufacture of cable accessories, electrical connectors and associated tools. The activities of the main premises in Brescia, the Italian regional officies and the subsidiary companies in Great Britain, France, Spain, Germany and USA are governed by a single Quality System, assessed by Lloyds Register of Quality as conforming to the ISO 9001:2008 norm, for the design, manufacture and sales of electrical connectors and associated tools, cable accessories, marking systems, tooling and products for railway applications. In house repair, refurbishment and calibration of tooling. This guarantees a homoge-neous and high quality level of the products and services that Cembre offers to its customers.Cembre S.p.A. factory in Brescia (ITALY) covers an area of approximately 128.000 sqmCembre S.p.A. has recently recognised the need to align its Environmental Management System with the spirit and content of UNI EN ISO 14001: 2004 as fundamental to future development. To this end the company undertook a wide-ranging review of all functions including development and design stages, material selection, usage and manufacturing processes. The resulting definition of operational procedures in line with these aims and provisions has enabled Cembre S.p.A. to achieve Environmental Certification, further highlighting the companies sensitive and careful approach to environmental protection. Cembre S.p.A. has recently enhanced its business processes with the certification by Lloyd's Register of Quality Assurance, of its Management System for the Health and Safety of Workers,in accordance with the standard OHSAS18001:2007 (Occupational Health and Safety Management System). The project, launched in early 2011, was strategically designed to facilitate the active participation of all employees at every level in the application of systems management, in order to optimise compliance of risk management capability with regard to laws and regulations concerning the health and safety of workers. All employees have received exhaustive training and are involved, by exercising their individual responsibility and competence, as key players in the identification of residual risk situations and the proposal of corrective solutions. For Cembre then, this certification is not only the proper recognition of the quality of work performed, but also an incentive to maintain a determined competitive advantage in increasingly difficult and aggressive international markets. 3. Cembre Ltd. factory in Curdworth (Birmingham)Production Units1 4. Index CONNECTORS FOR CONTROL, POWER AND DISTRIBUTION Halogen free insulated terminals type VP RP BP GP . . . . . . . . . . . . . . , , , Insulated chain terminals type CRP CBP CGP . . . . . . . . . . . . . . . . . . . , , PVC insulated crimp terminals type RF, BF, GF . . . . . . . . . . . . . . . . . . Reinforced PA 6.6 insulated terminals type RKY, BKY, GKY . . . . . . . . . Female disconnect terminals type RF-F, BF-F, GF-F . . . . . . . . . . . . . . . . Male disconnect terminals type RF-M, BF-M, GF-M . . . . . . . . . . . . . . . Partially insulated male/female connectors type RF-FM, BF-FM. . . . . . . Insulated bullet and socket connectors type RF-B, BF-B . . . . . . . . . . . . Butt and parallel connectors type PL-M, PL-P . . . . . . . . . . . . . . . . . . . Butt connectors type NL-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PE HD insulated, heat shrinkable type WL-M . . . . . . . . . . . . . . . . . . . Close end connectors type NL-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reinforced disconnect terminals type RKF, BKF, GKF . . . . . . . . . . . . . . Female connectors, open barrel type RN-FA, BN-FA . . . . . . . . . . . . . . Male conectors, open barrel type RN-MA, BN-MA . . . . . . . . . . . . . . . Male tabs, for board mounting type MP MPD . . . . . . . . . . . . . . . . . . , Connector sleeves type CFA, CMA . . . . . . . . . . . . . . . . . . . . . . . . . . Insulated end sleeves type PKD, PKE, PKC . . . . . . . . . . . . . . . . . . . . . Twin insulated end sleeves type PKT . . . . . . . . . . . . . . . . . . . . . . . . Uninsulated end sleeves type KE . . . . . . . . . . . . . . . . . . . . . . . . . . . . Uninsulated terminals type S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Uninsulated terminals type RN, BN, GN . . . . . . . . . . . . . . . . . . . . . . Copper tube crimping lugs type A-M . . . . . . . . . . . . . . . . . . . . . . . . . Ring tongue terminals with contained palm for L.V. circuit breakers type A-M . . Copper tube crimping lugs type A-L angled 90. . . . . . . . . . . . . . . . . . Heavy duty copper tube terminals type 2A-M . . . . . . . . . . . . . . . . . . . Through connectors type L-M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parallel connectors type L-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PA6.6 insulated copper tube lugs type ANE-M . . . . . . . . . . . . . . . . . . PA6.6 insulated fork terminals type ANE-U. . . . . . . . . . . . . . . . . . . . . Flexible braids type FL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PA6.6 insulated pin terminals type ANE-P . . . . . . . . . . . . . . . . . . . . . Uninsulated pin connectors type A-P . . . . . . . . . . . . . . . . . . . . . . . . . PA6.6 insulated copper tube lugs type ANE-M, for extra flexible copper conductor . Copper tube crimping lugs type A-M, for extra flexible copper conductor. . Copper tube lugs 4ESI fixing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copper tube crimping lugs according to DIN 46235 type DR . . . . . . . . Crimping through connectors according DIN 46267 T.1 type DSV . . . .pagepageCABLE GLANDS AND ACCESSORIES 4-5 6-7 8-9 10-11 12 12 12 12 13 13 13 13 14 14 15 15 15 16 17 17 18-19 20-21 22-23 24 25 26 27 27 28 29 29 30 30 31 32 33 34-35 35CONNECTORS FOR DERIVATIONS AND EARTHING Sleeve connectors type C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37 Mechanical fixing lugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Cable clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39cable glands, Polyamide, IP68 . . . . . . . . . . . . . . . . . . .58-60 IP68. IP68 cable glands, Polyamide, IP68. . . . . . . . . . . . . . . . . . . .61 ATEX cable glands, Polyamide, IP65 . . . . . . . . . . . . . . .62 Compression cable glands, Polyamide PA6, IP54 . . . . . . . . . . . . . . . .63-64 Compression cable glands & hole plugs, Polystyrene, IP54 . . . . . . . . .65 cable glands, Nickel plated brass, IP68 . . . . . . . . . . . .66-69 ATEX cable glands, Nickel plated brass, IP65 . . . . . . . .70 EMC cable glands & locknuts, Nickel plated brass, IP68 . . . . . . . . . .70 Compression cable glands, Nickel plated & plain brass, IP54 . . . . . . .71 cable glands, Stainless Steel, IP68 . . . . . . . . . . . . . . . . .72-73 Locknuts with & without collar, Polyamide . . . . . . . . . . . . . . . . . . . . .74-75 Locknuts, Nickel plated & plain brass . . . . . . . . . . . . . . . . . . . . . . . .76 EMC locknuts, Nickel plated brass . . . . . . . . . . . . . . . . . . . . . . . . .77 locknuts, Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . .77 spiral Internal plugs & multi-entry seals for cable glands . . . . . . . . . . . . . . . .78-79 Thread enlargers, reducers and converters, Nickel plated brass . . . . .80-81 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 O-rings, sealing rings and compression washers . . . . . . . . . . . . . . . .83-85 spiral Entry plugs, Polyamide PA6, Polystyrene, IP54 . . . . . . . . . . . . . . . . .86-87 Entry bushes, Polyamide PA6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 Entry plugs & bushes, Nickel plated & plain brass, IP54 . . . . . . . . . . .89 RUTASEAL grommets, EPDM, IP67 . . . . . . . . . . . . . . . . . . . . . . . . .90 CABLE & CONDUIT ACCESSORIES retaining clips for cable & conduit, ABS . . . . . . . . . . .90MECHANICAL TOOLS Mechanical tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92-109 Pneumatic press and bench tools . . . . . . . . . . . . . . . . . . . . . . . . . . .111-114HYDRAULIC TOOLS Hydraulic crimping tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116-127 Hydraulic cable cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128-136 Special tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137-138 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Crimping force gauges & pressure test devices . . . . . . . . . . . . . . . . . . . 139-140 CORDLESS HYDRAULIC TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142-160 HYDRAULIC PUMPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162-166HIGH VOLTAGE COPPER TERMINALS High voltage copper terminals type CA-M, 2A-M . . . . . . . . . . . . . . . . . High voltage terminals type CA-2M, 2A-2M, 2A-2M/55. . . . . . . . . . . High voltage stalk connectors type MT-C . . . . . . . . . . . . . . . . . . . . . . High voltage copper through connectors type MT-TD, MT-GC . . . . . . . .HYDRAULIC UNITS 40 41 42 43CONNECTORS FOR ALUMINIUM CONDUCTORS Aluminium terminals type AA-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . Through connectors type MTMA-GC, MTMA/1 . . . . . . . . . . . . . . . . . Reducer through connectors type MTMA-GC . . . . . . . . . . . . . . . . . . . Bimetallic connectors, copper palm fixing type CAA-M . . . . . . . . . . . . . Bimetallic connectors, copper pin type MTA-C . . . . . . . . . . . . . . . . . .44 45 45 46 46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167-168MARKETline PRODUCTS Cable ties and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170-174 Heat-shrinkable tubing type TERMOBLOCK . . . . . . . . . . . . . . . . . . . .175 Heat-shrinkable tubing type TERMOSTRIP . . . . . . . . . . . . . . . . . . . . .176-177 Heat-shrinkable tubing type TERMOCOIL . . . . . . . . . . . . . . . . . . . . . .178-179 Insulated covers type ES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 Cast resin joints type N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181-182 Mechanical tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183-184DIE SELECTOR CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186-194TERMINAL BLOCKS ZETApi single pole terminal blocks . . . . . . . . . . . . . . . . . . . . . . . 48-51 ZETAblock power distribution blocks . . . . . . . . . . . . . . . . . . . . . . . 52-53 ZETAmini one way terminal blocks. . . . . . . . . . . . . . . . . . . . . . . . 54 CONNECTORS FOR PHOTOVOLTAIC INSTALLATIONS CS4 connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-562APPENDIX Reference/Code cross-chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196-205 Comparison of AWG, MCM and Metric conductor cross sections . . . . . . 206 IEC 60228 : 2004 - 11 Conductor Tables . . . . . . . . . . . . . . . . . . . . . 207-209 System of denomination of harmonised cables according to CENELEC HD 361 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 UL & VDE approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 IP ratings, flammability tests, torque settings . . . . . . . . . . . . . . . . . . . . 212-214 5. E L E C T R I C A LC O N N E C T O R S 6. HALOGEN FREE INSULATED TERMINALSVP RP BP GPP range funnel entry T IN G OPERA URE R AT TEMPE 115 C UP TOThe P range of terminals has been designed, to meet the increasing demands for improved safety and reliability of electrical connectors. The polycarbonate insula-tion, is a halogen free, self extinguishing thermoplastic material class V0 (UL 94). The unique funnel shaped entry of the insulation sleeve, guarantees totalpin terminalsConductor Size sqmm (AWG)Ref.VP-P 10RP-P 10DimensionsmmQuantityBPL3,01,09,820,2Box/BagConductor Size sqmm (AWG)DimensionsRef.B3,0VP-PP 12/194.000/100RP-P 124,0 4,0 4,01,6 1,6 1,67,8 9,8 12,017,91,9mmPQuantity L12,4Box/Bag22,44.000/10019,9 22,1RP-PP 124,03,012,822,93.500/100RP-PP 12/14,03,011,321,43.500/100RP-PP 12/194,01,913,223,33.500/100RP-PP 12/234,02,313,223,33.500/100RP-PP 144,03,014,824,93.000/100RP-PP 16/234,02,317,227,32.500/100BP-PP 124,93,512,822,92.500/100BP-PP 12/254,92,513,323,42.500/100BP-PP 12/294,92,913,323,42.500/100BP-PP 16/254,92,517,227,32.500/100GP-PP 126,64,013,327,41.000/10046 (1210)GP-PP 176,62,919,133,21.000/100Conductor Size sqmm (AWG)Ref.3.500/100 3.500/100 3.000/100BP-P 84,91,77,817,94,91,89,819,93.000/100BP-P 124,91,811,821,93.000/100GP-P 106,62,210,424,51.500/100GP-P 126,62,212,626,71.500/100GP-P 146,62,214,628,71.500/1000,251,5 (2216)3.000/100BP-P 1046 (1210)The operating temperature range is 20 to + 115C (Surge + 130C). Recommended crimping tools are shown on pages 92 to 111, 144, 183.0,20,5 (2420) RP-P 81,52,5 (1614)insertion of the conductor strands into the terminal barrel, creating a secure and reliable, electrical and mechanical connection.blade terminals0,20,5 (2420)0,251,5 (2216)File no. E125401hooked blade terminals1,52,5 (1614)Dimensions43,0RP-PPL 464,0PQuantity Box/BagLX17,528,31,73.000/1004,617,528,31,73.000/1004,93,017,528,31,72.500/100BP-PPL 464,94,617,528,31,72.500/100GP-PPL 46 46 (1210)4,0BP-PPL 30 1,52,5 (1614)BRP-PPL 30 0,251,5 (2216)mm6,64,617,532,61,91.000/100 7. HALOGEN FREE INSULATED TERMINALSVP RP BP GPP range funnel entryFile no. E125401ring terminalsCond. Size sqmm Stud mm (AWG)Ref.fork/spade terminalsDimensions BMNmmQuantity LdBox/Bag2 * VP-M 23,05,64,52,817,52,2 4.000/100VP-M 33,05,64,52,817,53,2 4.000/10033,5 VP-M 3.50,251,5 (2216)1,52,5 (1614)46 (1210)3,05,64,52,817,5VP-M 43,07,06,53,520,24,3 4.000/1005VP-M 53,07,87,13,921,25,3 4.000/1006 * VP-M 6 2 * RP-M 2 3 RP-M 3 3,5 RP-M 3.5 3,5 RP-M 3.5/1 4 RP-M 4 4 RP-M 4/3 5 RP-M 5 6 RP-M 6 6 RP-M 6/1 7 RP-M 7 8 RP-M 8 10 RP-M 10 12 RP-M 12 2 *BP-M 2 3 BP-M 3 3,5 BP-M 3.5 3,5 BP-M 3.5/1 4 BP-M 4 5 BP-M 5 6 BP-M 6 6 BP-M 6/1 6 *BP-M 6/2 7 BP-M 7 8 BP-M 8 10 BP-M 10 12 BP-M 12 3 GP-M 3 3,5 GP-M 3.5 4 GP-M 4 5 GP-M 5 6 GP-M 6 6 GP-M 6/1 7 GP-M 7 8 GP-M 8 8 *GP-M 8/1 10 GP-M 10 10 GP-M 10/1 12 GP-M 12 14 GP-M 14 16 GP-M 163,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 6,6 6,6 6,6 6,6 6,6 6,6 6,6 6,6 6,6 6,6 6,6 6,6 6,6 6,69,4 5,6 5,6 5,6 6,2 7,0 7,8 7,8 9,4 12,0 9,4 12,0 15,5 18,0 5,6 5,6 5,6 6,2 8,0 8,0 9,4 12,0 8,4 10,0 12,0 15,5 18,0 8,0 8,0 9,0 9,0 11,0 11,0 11,0 13,6 11,0 13,6 15,5 19,0 21,0 24,08,1 4,7 4,5 2,8 4,5 2,8 4,5 2,8 7,1 3,1 6,5 3,5 7,1 3,9 7,1 3,9 8,1 4,7 10,3 6,0 8,1 4,7 10,3 6,0 13,0 7,7 15,5 9,0 5,0 2,8 5,0 2,8 5,0 2,8 6,5 3,1 6,5 4,0 7,5 4,0 8,6 4,7 10,3 6,0 5,4 4,2 7,8 5,0 10,3 6,0 13,0 7,7 15,5 9,0 8,1 4,0 8,1 4,0 8,1 4,5 8,1 4,5 11,1 5,5 8,1 5,5 11,1 5,5 12,1 6,8 8,1 5,5 12,1 6,8 13,8 7,7 15,1 9,5 16,1 10,5 17,1 12,023,0 17,4 17,4 17,4 20,2 20,1 21,1 21,1 22,9 26,4 22,9 26,4 30,9 34,6 17,9 17,9 17,9 19,7 20,6 21,6 23,4 26,4 19,7 22,9 26,4 30,9 34,6 26,2 26,2 26,7 26,7 30,7 27,7 30,7 33,0 27,7 33,0 35,7 38,7 40,7 43,26,4 2,2 3,2 3,7 3,7 4,3 4,3 5,3 6,4 6,4 7,2 8,4 10,5 13,0 2,2 3,2 3,7 3,7 4,3 5,3 6,4 6,4 6,4 7,2 8,4 10,5 13,0 3,2 3,7 4,3 5,3 6,4 6,4 7,2 8,4 8,4 10,5 10,5 13,0 15,0 17,04.000/100 3.000/100 3.000/100 3.000/100 3.000/100 3.000/100 3.000/100 3.000/100 3.000/100 2.000/100 2.500/100 2.500/100 2.000/100 2.000/100 2.500/100 2.500/100 3.000/100 2.500/100 2.500/100 2.500/100 2.500/100 2.500/100 2.500/100 2.500/100 1.500/100 1.500/100 1.500/100 1.500/100 1.500/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 500/100 500/100 500/100Ref.0,251,5 (2216)1,52,5 (1614)mmQuantityMNL3,05,55,54,018,73,2 4.000/1003,06,06,53,819,53,7 4.000/100VP-U 43,06,57,53,720,44,3 4.000/1003 RP-U 3 3,5 RP-U 3.5 3,5 RP-U 3.5/2 4 RP-U 4 4 RP-U 4/1 4 RP-U 4/2 5 RP-U 5 5 *RP-U 5/1 6 RP-U 6 6 RP-U 6/1 8 RP-U 8 10 RP-U 10 12 RP-U 12 3 BP-U 3 3,5 BP-U 3.5 3,5 *BP-U 3.5/1 4 BP-U 4 4 BP-U 4/1 4 BP-U 4/2 5 BP-U 5 6 BP-U 6 6 BP-U 6/1 8 BP-U 8 10 BP-U 10 12 BP-U 12 3,5 GP-U 3.54,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 6,65,5 6,0 6,4 6,5 8,5 7,5 8,5 9,4 9,4 12,0 14,0 17,5 20,0 5,5 6,4 7,2 6,5 8,5 7,5 8,5 9,4 12,0 14,0 17,5 20,0 7,55,5 6,5 6,5 7,5 7,5 7,5 7,5 7,5 8,1 9,2 10,0 13,0 15,5 5,5 6,5 6,5 7,5 7,5 7,5 7,5 8,1 9,2 10,0 13,0 15,5 8,54,0 3,8 3,8 3,7 3,7 3,7 3,7 3,7 4,7 7,1 6,3 7,7 9,0 4,0 3,8 3,8 3,7 3,7 3,7 3,7 4,7 7,1 6,3 7,7 9,0 3,919,6 20,4 20,4 21,3 21,3 21,3 21,3 21,3 22,9 26,4 26,4 30,9 34,6 19,6 20,4 20,4 21,3 21,3 21,3 21,3 22,9 26,4 26,4 30,9 34,6 26,5VP-U 34dBox/BagB3,5 VP-U 3.5 0,20,5 (2420)Dimensions 33,7 4.000/1004 0,20,5 (2420)Cond. Size sqmm Stud mm (AWG)3,2 3,7 3,7 4,3 4,3 4,3 5,3 5,3 6,4 6,4 8,4 10,5 13,0 3,2 3,7 3,7 4,3 4,3 4,3 5,3 6,4 6,4 8,4 10,5 13,0 3,73.500/100 3.000/100 3.500/100 3.000/100 3.500/100 3.500/100 3.000/100 3.000/100 2.500/100 2.500/100 2.500/100 1.500/100 1.500/100 2.500/100 2.500/100 2.500/100 2.500/100 3.000/100 2.000/100 2.500/100 2.500/100 2.500/100 1.500/100 2.000/100 1.500/100 1.500/1004GP-U 46,67,58,04,426,54,3 1.000/1005GP-U 56,69,58,04,426,55,3 1.000/1006GP-U 66,610,011,05,530,66,4 1.000/1008GP-U 86,613,512,08,034,18,4 1.000/10010GP-U 106,615,513,08,035,1 10,5 1.000/10010GP-U 10/16,617,513,87,735,7 10,5 1.000/10012GP-U 126,621,015,19,538,7 13,0500/10014GP-U 146,623,016,1 10,540,7 15,0500/100GP-U 166,626,017,1 11,542,7 17,0500/10046 (1210) 16*Made to order5 8. INSULATED CHAIN TERMINALSCRP CBP CGPCP range with easy entryT IN G OPERA URE R AT TEMPE 115 C UP TOThe CP range of terminals has been designed to meet the increasing demands for improved safety and reliability of electrical connectors.Developed for use with production equipment, to give a quick and reliable crimped joint, the polycarbonate insulation is a halogen free, self extinguishing thermoplastic material classV0 (UL 94). The unique funnel shaped entry of the insulation sleeve guarantees total insertion of the conductor strands into the terminal barrel, creating a se-pin terminalsblade terminalsFile no. E125401cure and reliable, electrical and mechanical connection. The operating temperature range is 20 to + 115C (Surge + 130C).File no. E125401Conductor Size sqmm (AWG)0,251,5 (2216) 1,52,5 (1614) 46 (1210)Ref.CRP-P 8 CRP-P 10 CRP-P 12 CBP-P 8 CBP-P 10 CBP-P 12 CGP-P 10 CGP-P 12 CGP-P 14Dimensions B4,0 4,0 4,0 4,9 4,9 4,9 6,6 6,6 6,61,6 1,6 1,6 1,8 1,8 1,8 2,2 2,2 2,2P8,0 10,0 12,0 8,0 10,0 12,0 10,0 12,0 14,0mm L17,9 19,9 22,1 17,9 19,9 21,9 24,5 26,7 28,7Quantity2.000 2.000 2.000 1.750 1.750 1.750 1.250 1.250 1.250Conductor Size sqmm (AWG)DimensionsRef.PmmQuantityBL4,0 4,0 4,0 4,0 4,9 4,93,0 3,0 2,3 3,0 3,5 2,512,8 11,3 13,2 14,8 12,8 13,322,9 21,4 23,3 24,9 22,9 23,42.000 2.000 2.000 2.000 1.750 1.7501,52,5 (1614)CRP-PP 12 *CRP-PP 12/1 *CRP-PP 12/23 CRP-PP 14 CBP-PP 12 *CBP-PP 12/2546 (1210)CGP-PP 126,64,013,327,41.250*CGP-PP 176,62,919,133,21.2500,251,5 (2216)male disconnect terminalsfemale disconnect terminalsFile no. E212000female disconnect terminals fully insulatedFile no. E212000 File no. E212000Conductor Size sqmm (AWG)Ref.0,251,5 (2216)CRP-M 6086,35 x 0,82.0001,52,5 (1614)CBP-M 6086,35 x 0,81.75046 (1210)CGP-M 6086,35 x 0,81.250Tab mmQuantityConductor Size sqmm (AWG)0,251,5 (2216)1,52,5 (1614) 46 (1210)Ref.Tab mmQuantityCRP-F 305 CRP-F 308 CRP-F 405 CRP-F 408 CRP-F 608 CBP-F 405 CBP-F 408 CBP-F 6082,8 x 0,5 2,8 x 0,8 4,8 x 0,5 4,8 x 0,8 6,35 x 0,8 4,8 x 0,5 4,8 x 0,8 6,35 x 0,82.000 2.000 2.000 2.000 2.000 1.750 1.750 1.750CGP-F 6086,35 x 0,8Conductor Size sqmm (AWG)Ref.Tab mmQuantityCRP-F 405P CRP-F 408P CRP-F 608P CBP-F 408P CBP-F 608P4,8 x 0,5 4,8 x 0,8 6,35 x 0,8 4,8 x 0,8 6,35 x 0,82.000 2.000 1.500 1.500 1.500CGP-F 608P6,35 x 0,81.2501.2500,251,5 (2216) 1,52,5 (1614) 46 (1210)*Made to order6 9. INSULATED CHAIN TERMINALSCRP CBP CGPCP range with easy entry fork/spade terminals File no. E125401Cond. Size sqmm Stud mm (AWG)Ref.3 3,5 3,5 4 4 4 5 6 6 8 3 3,5 4 4 4 5 6 3,5 4 5 6CRP-U 3 CRP-U 3.5 * CRP-U 3.5/2 CRP-U 4 * CRP-U 4/1 * CRP-U 4/2 CRP-U 5 CRP-U 6 * CRP-U 6/1 * CRP-U 8 CBP-U 3 CBP-U 3.5 CBP-U 4 * CBP-U 4/1 * CBP-U 4/2 CBP-U 5 CBP-U 6 * CGP-U 3.5 * CGP-U 4 CGP-U 5 CGP-U 6Cond. Size sqmm (AWG) Stud mmRef.1,52,5 (1614)40,251,5 (2216)1,52,5 (1614)46 (1210)CBP-U 4/3LDimensions BMring terminalsmmNLd4,0 3,8 3,8 3,7 3,7 3,7 3,7 4,7 7,1 6,3 4,0 3,8 3,7 3,7 3,7 3,7 4,7 3,9 4,4 4,4 5,54,0 5,5 5,5 4,0 6,0 6,5 4,0 6,4 6,5 4,0 6,5 7,5 4,0 8,5 7,5 4,0 7,5 7,5 4,0 8,5 7,5 4,0 9,4 8,1 4,0 12,0 9,2 4,0 14,0 10,0 4,9 5,5 5,5 4,9 6,4 6,5 4,9 6,5 7,5 4,9 8,5 7,5 4,9 7,5 7,5 4,9 8,5 7,5 4,9 9,4 8,1 6,6 7,5 8,5 6,6 7,5 8,0 6,6 9,5 8,0 6,6 10,0 11,019,6 20,4 20,4 21,3 21,3 21,3 21,3 22,9 26,4 26,4 19,6 20,4 21,3 21,3 21,3 21,3 22,9 26,5 26,5 26,5 30,63,2 3,7 3,7 4,3 4,3 4,3 5,3 6,4 6,4 8,4 3,2 3,7 4,3 4,3 4,3 5,3 6,4 3,7 4,3 5,3 6,4DimensionsmmBALd4,96,59,514,54,3Quantity2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.250 1.250 1.250 1.250Quantity1.750File no. E125401Cond. Size sqmm Stud mm (AWG)Ref.3 3,5 3,5 4 0,251,5 4 (2216) 5 6 6 7 8 3 3,5 3,5 4 1,52,5 5 (1614) 6 6 7 8 3 3,5 4 5 46 (1210) 6 6 7 8 8CRP-M 3 CRP-M 3.5 * CRP-M 3.5/1 CRP-M 4 * CRP-M 4/3 CRP-M 5 CRP-M 6 * CRP-M 6/1 CRP-M 7 CRP-M 8 CBP-M 3 CBP-M 3.5 * CBP-M 3.5/1 CBP-M 4 CBP-M 5 CBP-M 6 * CBP-M 6/1 CBP-M 7 CBP-M 8 CGP-M 3 CGP-M 3.5 CGP-M 4 CGP-M 5 CGP-M 6 * CGP-M 6/1 CGP-M 7 CGP-M 8 * CGP-M 8/1DimensionsmmBMNLd4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,0 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 6,6 6,6 6,6 6,6 6,6 6,6 6,6 6,6 6,65,6 5,6 6,2 7,0 7,8 7,8 9,4 12,0 9,4 12,0 5,6 5,6 6,2 8,0 8,0 9,4 12,0 10,0 12,0 8,0 8,0 9,0 9,0 11,0 11,0 11,0 13,6 11,04,5 4,5 7,1 6,5 7,1 7,1 8,1 10,3 8,1 10,3 5,0 5,0 6,5 6,5 7,5 8,6 10,3 7,8 10,3 8,1 8,1 8,1 8,1 11,1 8,1 11,1 12,1 8,12,8 2,8 3,1 3,5 3,9 3,9 4,7 6,0 4,7 6,0 2,8 2,8 3,1 4,0 4,0 4,7 6,0 5,0 6,0 4,0 4,0 4,5 4,5 5,5 5,5 5,5 6,8 5,517,4 17,4 20,2 20,1 21,1 21,1 22,9 26,4 22,9 26,4 17,9 17,9 19,6 20,6 21,6 23,4 26,4 22,9 26,4 26,2 26,2 26,7 26,7 30,7 27,7 30,7 33,0 27,73,2 3,7 3,7 4,3 4,3 5,3 6,4 6,4 7,2 8,4 3,2 3,7 3,7 4,3 5,3 6,4 6,4 7,2 8,4 3,2 3,7 4,3 5,3 6,4 6,4 7,2 8,4 8,4Quantity2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.250 1.250 1.250 1.250 1.250 1.250 1.000 1.250 1.250hooked blade terminals Interchangeable application heads are available for crimping these terminals with the bench press ELB-3 (see page 114).Cond. Size sqmm (AWG)0,251,5 (2216) 1,52,5 (1614)Ref.DimensionsmmQuantityBPLXCRP-PPL304,03,017,528,81,72.000CBP-PPL304,93,017,528,81,71.750*Made to order7 10. PVC INSULATED CRIMP TERMINALSRF BF GFF range funnel entryFile no. E125401The unique funnel shaped PVC sleeve guarantees total insertion of the conductor strands into the terminal barrel, creating a secure and reliable, electrical and mechanical connection. The internal surface of thebarrel is rifled to improve contact with conductor strands when crimped and to increase tensile strength. The F range of terminals offers a wide selection of rings, forks, pins and blades, designed to meet the everpin terminalsConductor Size sqmm (AWG)Ref.DimensionsmmQuantity Box/BagBPL3,91,68,017,93,91,610,019,93.500/100RF-P 123,91,612,022,13.000/1004,91,78,017,93.000/100BF-P 104,91,810,019,93.000/100BF-P 124,91,812,021,93.000/100GF-P 106,72,210,024,61.500/100GF-P 126,72,212,026,86,72,214,028,81.500/100DimensionsRef.mmQuantity Box/Bag1.500/100GF-P 14Conductor Size sqmm (AWG)3.500/100BF-P 846 (1210)RF-P 101,52,5 (1614)VALSTAR V3-F Comprising: - An assortment of crimp terminals for conductor sizes 0,25 6 sqmm - Tool HP3blade terminalsRF-P 80,251,5 (2216)changing end user requirements. The operating temperature range is 20 to + 80C (Surge + 90C). Recommended crimping tools are shown on pages 92 to 111, 144, 183.hooked blade terminalsConductor Size sqmm (AWG)LRF-PP 12 RF-PP 12/1 RF-PP 12/19 RF-PP 12/23 RF-PP 14 RF-PP 16/233,9 3,9 3,9 3,9 3,9 3,93,0 3,0 1,9 2,3 3,0 2,312,8 11,3 13,2 13,2 14,8 17,222,9 21,4 23,3 23,3 24,9 27,33.500/100 3.500/100 3.500/100 3.000/100 3.000/100 2.500/1004,93,512,822,92.500/1004,92,513,323,42.500/100BF-PP 12/294,92,913,323,42.500/100BF-PP 16/254,92,517,227,32.500/100GF-PP 12 46 (1210)PBF-PP 12/25 1,52,5 (1614)BBF-PP 120,251,5 (2216)6,74,013,327,51.000/100GF-PP 176,72,919,233,41.000/100Ref.Dimensions83,0RF-PPL 463,9PmmQuantity Box/BagLX17,528,41,73.000/1004,617,528,41,72.500/1004,93,017,528,41,72.500/100BF-PPL 464,94,617,528,41,72.500/100GF-PPL 46 46 (1210)3,9BF-PPL 30 1,52,5 (1614)BRF-PPL 30 0,251,5 (2216)6,74,617,532,71,91.000/100 11. PVC INSULATED CRIMP TERMINALSRF BF GFF range funnel entryFile no. E125401ring terminalsCond. Size sqmm Stud mm (AWG)0,251,5 (2216)1,52,5 (1614)46 (1210)Ref.2 * RF-M 2 3 RF-M 3 3,5 RF-M 3.5 3,5 RF-M 3.5/1 4 RF-M 4 4 RF-M 4/3 5 RF-M 5 6 RF-M 6 6 RF-M 6/1 7 RF-M 7 8 RF-M 8 10 RF-M 10 12 RF-M 12 2 * BF-M 2 3 BF-M 3 3,5 BF-M 3.5 3,5 BF-M 3.5/1 4 BF-M 4 5 BF-M 5 6 BF-M 6 6 BF-M 6/1 6 * BF-M 6/2 7 BF-M 7 8 BF-M 8 10 BF-M 10 12 BF-M 12 3 GF-M 3 3,5 GF-M 3.5 4 GF-M 4 5 GF-M 5 6 GF-M 6 6 GF-M 6/1 7 GF-M 7 8 GF-M 8 8 * GF-M 8/1 10 GF-M 10 10 GF-M 10/1 12 GF-M 12 14 GF-M 14 16 GF-M 16fork/spade terminalsDimensions B3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 6,7 6,7 6,7 6,7 6,7 6,7 6,7 6,7 6,7 6,7 6,7 6,7 6,7 6,75,6 5,6 5,6 6,2 7,0 7,8 7,8 9,4 12,0 9,4 12,0 15,5 18,0 5,6 5,6 5,6 6,2 8,0 8,0 9,4 12,0 8,4 10,0 12,0 15,5 18,0 8,0 8,0 9,0 9,0 11,0 11,0 11,0 13,6 11,0 13,6 15,5 19,0 21,0 24,0MN4,5 2,8 4,5 2,8 4,5 2,8 7,1 3,1 6,5 3,5 7,1 3,9 7,1 3,9 8,1 4,7 10,3 6,0 8,1 4,7 10,3 6,0 13,0 7,7 15,5 9,0 5,0 2,8 5,0 2,8 5,0 2,8 6,5 3,1 6,5 4,0 7,5 4,0 8,6 4,7 10,3 6,0 5,4 4,2 7,8 5,0 10,3 6,0 13,0 7,7 15,5 9,0 8,1 4,0 8,1 4,0 8,1 4,5 8,1 4,5 11,1 5,5 8,1 5,5 11,1 5,5 12,1 6,8 8,1 5,5 12,1 6,8 13,8 7,7 15,1 9,5 16,1 10,5 17,1 12,0mmQuantity Ld17,4 17,4 17,4 20,3 20,1 21,1 21,1 22,9 26,4 22,9 26,4 30,9 34,6 17,9 17,9 17,9 19,7 20,6 21,6 23,4 26,4 19,7 22,9 26,4 30,9 34,6 26,3 26,3 26,8 26,8 30,8 27,8 30,8 33,1 27,8 33,1 35,8 38,8 40,8 43,32,2 3,2 3,7 3,7 4,3 4,3 5,3 6,4 6,4 7,2 8,4 10,5 13,0 2,2 3,2 3,7 3,7 4,3 5,3 6,4 6,4 6,4 7,2 8,4 10,5 13,0 3,2 3,7 4,3 5,3 6,4 6,4 7,2 8,4 8,4 10,5 10,5 13,0 15,0 17,0Box/Bag3.000/100 3.000/100 3.000/100 3.000/100 3.000/100 3.000/100 3.000/100 3.000/100 2.000/100 2.500/100 2.000/100 1.500/100 1.500/100 3.000/100 2.500/100 2.500/100 2.500/100 2.500/100 2.500/100 2.500/100 2.000/100 2.500/100 2.000/100 1.500/100 1.500/100 1.000/100 1.500/100 1.500/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 500/100 500/100 500/100Cond. Size sqmm Stud mm (AWG)Ref.DimensionsmmQuantity1,52,5 (1614)BMNLd3 RF-U 3 3,5 RF-U 3.5 3,5 RF-U 3.5/1 3,5 RF-U 3.5/2 4 RF-U 4 4 RF-U 4/1 4 RF-U 4/2 5 RF-U 5 5 * RF-U 5/1 6 RF-U 6 6 RF-U 6/1 8 RF-U 8 10 RF-U 10 12 RF-U 12 3 BF-U 3 3,5 BF-U 3.5 3,5 * BF-U 3.5/1 4 BF-U 4 4 BF-U 4/1 4 BF-U 4/2 5 BF-U 5 5 BF-U 5/2 6 BF-U 6 6 BF-U 6/1 8 BF-U 8 10 BF-U 10 12 BF-U 123,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 3,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,9 4,95,5 6,0 7,2 6,4 6,5 8,5 7,5 8,5 9,4 9,4 12,0 14,0 17,5 20,0 5,5 6,4 7,2 6,5 8,5 7,5 8,5 12,0 9,4 12,0 14,0 17,5 20,05,5 6,5 6,5 6,5 7,5 7,5 7,5 7,5 7,5 8,1 9,2 10,0 13,0 15,5 5,5 6,5 6,5 7,5 7,5 7,5 7,5 11,3 8,1 9,2 10,0 13,0 15,54,0 3,8 3,8 3,8 3,7 3,7 3,7 3,7 3,7 4,7 7,1 6,3 7,7 9,0 4,0 3,8 3,8 3,7 3,7 3,7 3,7 5,0 4,7 7,1 6,3 7,7 9,019,6 20,4 20,4 20,4 21,3 21,3 21,3 21,3 21,3 22,9 26,4 26,4 30,9 34,6 19,6 20,4 20,4 21,3 21,3 21,3 21,3 26,3 22,9 26,4 26,4 30,9 34,63,2 3,7 3,7 3,7 4,3 4,3 4,3 5,3 5,3 6,4 6,4 8,4 10,5 13,0 3,2 3,7 3,7 4,3 4,3 4,3 5,3 5,3 6,4 6,4 8,4 10,5 13,03,5 GF-U 3.50,251,5 (2216)Box/Bag3.500/100 3.500/100 4.000/100 3.500/100 3.000/100 3.000/100 3.000/100 3.000/100 3.000/100 2.500/100 2.500/100 2.000/100 1.500/100 1.500/100 2.500/100 2.500/100 3.000/100 2.500/100 2.000/100 2.000/100 2.500/100 1.500/100 2.500/100 2.500/100 1.500/100 1.000/100 1.500/1006,77,58,53,926,63,7 1.500/1004GF-U 46,77,58,04,426,64,3 1.000/1005GF-U 56,79,58,04,426,65,3 1.000/1006GF-U 66,710,011,05,530,76,4 1.000/1008GF-U 86,713,512,08,034,28,4 1.000/10010GF-U 106,715,513,08,035,2 10,5 1.000/10010GF-U 10/1 6,717,513,87,735,8 10,5 1.000/10012GF-U 126,721,015,19,538,8 13,0500/10014GF-U 146,723,016,1 10,540,8 15,0500/100GF-U 166,726,017,1 11,542,8 17,0500/10046 (1210) 16*Made to order9 12. REINFORCED PA 6.6 INSULATED TERMINALSRKY BKY GKYKY rangeKY type terminals are designed to offer improved mechanical and electrical integrity under heavy-duty application. This is achieved via a Copper sleeve located between the Copper barrel and Polya-mide insulation of the terminal. Then, during crimping, the insulation of the conductor is integrated into the crimp due to the Copper sleeve being deformed around it to maintain the level of grip required in ap-pin terminalsConductor Size sqmm (AWG)Ref.Recommended crimping tools are shown on pages 92 to 111, 144, 183.blade terminalsDimensionsmmQuantity Box/BagBPLRKY-P 84,51,99,019,84,51,910,020,8Conductor Size sqmm (AWG)3.500/100RKY-P 10 0,251,5 (2216)plications subject to continuous mechanical vibrations (e.g: mobile plant, vehicles, moving components). The operating temperature range is 20 to + 105C (Surge + 110C).3.500/100DimensionsRef.mmQuantity Box/BagBPLRKY-PP 124,53,013,023,83.500/100RKY-PP 12/19 0,251,5 (2216)4,52,018,028,83.000/100RKY-PP 16/234,52,218,028,82.500/1001,912,022,83.000/1005,21,99,019,83.000/100BKY-PP 125,23,013,023,82.500/100BKY-P 105,21,910,020,83.000/100BKY-PP 12/255,22,413,023,82.500/100BKY-P 125,21,912,022,83.000/100BKY-PP 16/235,22,218,028,82.500/100GKY-PP 12 46 (1210)4,5BKY-P 81,52,5 (1614)RKY-P 127,04,014,027,01.000/100GKY-P 147,02,814,027,01.500/100GKY-PP 177,02,018,031,01.000/1001,52,5 (1614)46 (1210)Conductor Size sqmm (AWG)Ref.Dimensions46 (1210)103,0RKY-PPL 464,5PmmQuantity Box/BagLX16,828,22,13.000/1004,616,828,22,13.000/1005,23,016,828,22,12.500/100BKY-PPL 465,24,616,828,22,12.500/100GKY-PPL 461,52,5 (1614)4,5BKY-PPL 300,251,5 (2216)BRKY-PPL 30hooked blade terminals7,04,617,230,22,41.000/100 13. REINFORCED PA 6.6 INSULATED TERMINALSRKY BKY GKYKY rangering terminalsCond. Size sqmm Stud mm (AWG)0,251,5 (2216)1,52,5 (1614)46 (1210)3 3,5 3,5 4 5 6 8 10 12 3 3,5 3,5 4 5 6 8 10 12 3,5 4 5 6 8 10 12 14 16Ref.fork/spade terminalsDimensions RKY-M 3 4,5 RKY-M 3.5 4,5 RKY-M 3.5/1 4,5 RKY-M 4 4,5 RKY-M 5 4,5 RKY-M 6/1 4,5 RKY-M 8 4,5 RKY-M 10 4,5 RKY-M 12 4,5 BKY-M 3 5,2 BKY-M 3.5 5,2 BKY-M 3.5/1 5,2 BKY-M 4 5,2 BKY-M 5 5,2 BKY-M 6/1 5,2 BKY-M 8 5,2 BKY-M 10 5,2 BKY-M 12 5,2 GKY-M 3.5 7,0 GKY-M 4 7,0 GKY-M 5 7,0 GKY-M 6 7,0 GKY-M 8 7,0 GKY-M 10 7,0 GKY-M 12 7,0 GKY-M 14 7,0 GKY-M 16 7,0B5,5 5,5 6,6 6,6 8,0 11,6 11,6 13,6 19,6 6,6 6,6 6,6 8,5 8,5 12,0 12,0 13,6 19,2 7,2 9,5 9,5 12,0 15,0 15,0 19,2 32,0 32,0MN5,0 2,5 5,0 2,5 6,3 3,1 6,3 3,1 7,0 3,8 11,0 5,8 11,0 5,8 13,9 6,6 16,0 9,4 4,8 3,0 4,8 3,0 6,3 3,1 7,8 4,0 7,8 4,0 11,0 5,8 11,0 5,8 13,9 6,6 16,0 9,4 6,1 3,6 9,1 4,5 9,1 4,5 10,5 6,0 13,5 7,5 13,5 7,5 16,0 9,6 25,2 16,0 25,2 16,0mmQuantity Ld18,5 18,5 20,4 20,4 21,8 27,8 27,8 31,5 36,4 18,8 18,8 20,4 22,8 22,8 27,8 27,8 31,5 36,4 22,7 26,6 26,6 29,5 34,0 34,0 38,6 54,2 54,23,2 3,7 3,7 4,3 5,3 6,4 8,4 10,5 13,0 3,2 3,7 3,7 4,3 5,3 6,4 8,4 10,5 13,0 3,7 4,3 5,3 6,4 8,4 10,5 13,0 15,0 17,0Box/Bag3.000/100 3.000/100 3.000/100 3.000/100 3.000/100 2.000/100 2.500/100 1.500/100 1.500/100 2.500/100 2.500/100 2.500/100 2.500/100 2.500/100 2.000/100 1.500/100 1.500/100 1.000/100 1.500/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 1.000/100 500/100 500/100Cond. Size sqmm Stud mm (AWG)3Ref.RKY-U 33,5 RKY-U 3.5DimensionsmmQuantity dBox/BagBMNL4,55,76,54,522,03,2 3.000/1004,55,76,54,522,03,7 3.000/1004RKY-U 44,56,46,54,522,04,3 3.000/1005RKY-U 54,58,16,54,522,05,3 3.000/1006RKY-U 64,59,56,54,522,06,4 3.000/100RKY-U 6/14,512,011,06,028,06,4 3.000/100BKY-U 35,25,76,54,522,03,2 2.500/1005,26,06,54,522,03,7 2.500/1006,54,522,04,3 2.500/1000,251,5 (2216) 6 33,5 BKY-U 3.5 45,26,45BKY-U 55,27,96,54,522,05,3 2.500/1006BKY-U 65,29,36,54,522,06,4 2.500/1006BKY-U 6/15,212,011,06,028,06,4 2.000/1003,5 GKY-U 3.51,52,5 (1614)BKY-U 47,07,27,53,924,43,7 1.500/10047,07,27,53,924,44,3 1.000/1005GKY-U 57,09,07,05,525,55,3 1.000/1006 46 (1210)GKY-U 4GKY-U 67,012,012,06,531,56,4 1.000/1008GKY-U 87,014,010,57,030,58,4 1.000/10011 14. RF-F BF-F GF-F Manufactured from brass strip - Electrolytically tin plated - The operating temperature range is 20 to + 115C (Surge + 130C). - Recommended crimping tools are shown on pages 92 to 111, 144, 183.FEMALE DISCONNECT TERMINALS File no. E212000Polycarbonate insulated terminals partially reinforced with copper sleevePolycarbonate fully insulated terminals - partially reinforced with copper sleeveCond. Size sqmm (AWG)Cond. Size sqmm (AWG)1,52,5 (1614) 46 (1210)QuantityRF-F 305 RF-F 308 RF-F 405 RF-F 4082,8 x 0,5 2,8 x 0,8 4,8 x 0,5 4,8 x 0,83.500/100 3.500/100 3.000/100 3.000/100RF-F 6080,251,5 (2216)Tab Size6,35 x 0,8 2.000/100BF-F 405 BF-F 4084,8 x 0,5 4,8 x 0,8BF-F 6086,35 x 0,8 2.000/100GF-F 6086,35 x 0,8 1.000/100Ref.Box/Bag3.000/100 3.000/100Tab SizeQuantityRF-F 305P RF-F 308P RF-F 405P RF-F 408P2,8 x 0,5 2,8 x 0,8 4,8 x 0,5 4,8 x 0,82.500/100 2.500/100 2.000/100 2.000/100RF-F 608P6,35 x 0,8 1.500/100BF-F 405P BF-F 408P4,8 x 0,5 2.000/100 4,8 x 0,8 2.000/100BF-F 608P6,35 x 0,8 1.500/100GF-F 608P6,35 x 0,8 1.000/100Ref.0,251,5 (2216)1,52,5 (1614) 46 (1210)Box/BagMALE DISCONNECT TERMINALSRF-M BF-M GF-MFile no. E212000RF-FM BF-FM RF-B BF-BPolycarbonate fully insulated terminals - partially reinforced with copper sleeveCond. Size sqmm (AWG)Manufactured from brass strip - Electrolytically tin plated - The operating temperature range is 20 to + 115C (Surge + 130C). - Recommended crimping tools are shown on pages 92 to 111, 144, 183.Polycarbonate insulated terminals partially reinforced with copper sleeveCond. Size sqmm (AWG)0,251,5 (2216) 1,52,5 (1614) 46 (1210)12Tab SizeQuantity Box/BagRF-M 6086,35 x 0,8 3.000/100BF-M 6086,35 x 0,8 2.500/100GF-M 6080,251,5 (2216) 1,52,5 (1614)Tab SizeRef.Quantity Box/Bag6,35 x 0,8 1.000/100MALE/FEMALE CONNECTORSRF-M 608P 6,35 x 0,8 1.000/100 BF-M 608P 6,35 x 0,8 1.000/100BULLET AND SOCKET CONNECTORSFile no. E212000 Polycarbonate Polycarbonate insulated terminals insulated terminals partially reinforced with copper sleeve partially reinforced with copper sleeve Cond. Size sqmm (AWG)Manufactured from brass strip - Electrolytically tin plated - The operating temperature range is 20 to + 115C (Surge + 130C). - Recommended crimping tools are shown on pages 92 to 111, 144, 183.Ref.Ref.Tab SizeQuantity Box/BagCond. Size sqmm (AWG)0,251,5 (2216)RF-FM 608 6,35 x 0,8 1.500/1000,251,5 (2216)1,52,5 (1614)BF-FM 608 6,35 x 0,8 1.500/1001,52,5 (1614)Ref.mmiQuantityRF-BM 442.500/100RF-BF 441.000/100BF-BM 552.000/100BF-BF 55800/100Box/Bag 15. BUTT AND PARALLEL CONNECTORS File no. E125401butt connectorsparallel connectorsPVC insulated Cond. Size sqmm (AWG)Ref.mmLQuantityPL 01-M3,0253.000/100PL 03-M4,0252.000/100PL 06-M5,0251.500/100PL 1-M6,532500/100PL 03-P4,0203.000/100PL 06-P0,20,5 (2420) 0,251,5 (2216) 1,52,5 (1614) 46 (1210) 0,251,5 (2216) 1,52,5 (1614)mm5,0162.000/100Box/BagBUTT CONNECTORS Polyamide PA6.6 insulated Cond. Size sqmm (AWG)iLmmmm0,51 (2017) 1,52,5 (1614) 46 (1210)NL-MNL 03-M4,025,02.000/100NL 06-M5,425,51.500/100NL 1-M5,432,01.000/100NL 2-M6,843,0500/100NL 3-M7,944,0500/100Box/BagPE HD insulated, heat shrinkable Cond. Size sqmm (AWG)Manufactured from copper tube - Electrolytically tin plated - The operating temperature range is 20 to + 80C (Surge + 90C). - Recommended crimping tools are shown on pages 92 to 111, 144, 183.QuantityRef.0,251,5 (2216) 1,52,5 (1614) 46 (1210) 10 (87) 16 (65)PLimmmmmmL2QuantityWL 03-M1,715,036,0WL 06-M2,315,036,01.000/100WL 1-M3,415,041,0WL-M1.500/100500/100Ref.L1Manufactured from copper tube - Electrolytically tin plated - The operating temperature range is 20 to + 115C (Surge + 130C). - Recommended crimping tools are shown on pages 92 to 111, 144, 183.Box/BagMax operating voltage: 600 V Shrink temperature: 150 C Temperature range: -40 C to + 105 CManufactured from copper tube - Electrolytically tin plated - Heat shrink sleeve with sealant - Recommended crimping tools are shown on pages 94.CLOSE END CONNECTORS Polyamide PA6.6 insulated Cond. Size sqmm (AWG)Ref.mmmm0,251,5 (2216)NL 03-P9,821,01.000/100NL 06-P7,919,91.000/100NL 06-PB6,513,61.500/100NL 1-P10,521,5800/100NL 1-PG9,017,81.000/100NL-P1,52,5 (1614) 46 (1210)LQuantity Box/BagManufactured from copper tube - Electrolytically tin plated - The operating temperature range is 20 to + 115C (Surge + 130C). - Recommended crimping tools are shown on pages 92 to 111, 144, 183. 13 16. RKF-F BKF-F GK-FREINFORCED DISCONNECT TERMINALS for copper cables female connectors, fully reinforced with copper sleeve PA6.6 insulated terminals Cond. Size sqmm (AWG)0,251,5 (2216)Manufactured from brass strip - Electrolytically tin plated - fully reinforced with copper sleeve, funnel entry - The operating temperature range is 20C to +105C (Surge +110C) - Recommended crimping tools are shown on pages 92 to 111, 144, 183.RKF BKF GKF Manufactured from brass strip - Electrolytically tin plated - fully reinforced with copper sleeve, funnel entry - The operating temperature range is 20C to +105C (Surge +110C) - Recommended crimping tools are shown on pages 92 to 111, 144, 183.RN-FA BN-FAPA6.6 fully insulated terminalsRef.Tab SizeQuantityCond. Size sqmm (AWG)RKF-F 305 RKF-F 308 RKF-F 405 RKF-F 4082,8 x 0,5 2,8 x 0,8 4,8 x 0,5 4,8 x 0,83.500/100 3.500/100 3.000/100 3.000/1000,251,5 (2216)Box/BagRKF-F 608 6,35 x 0,8 2.500/100 1,52,5 (1614) 46 (1210)BKF-F 405 4,8 x 0,5 BKF-F 408 4,8 x 0,8GK-F 608Box/Bag4,8 x 0,5 2.500/100 4,8 x 0,8 2.000/100RKF-F 608P6,35 x 0,8 1.000/100BKF-F 405P BKF-F 408P4,8 x 0,5 2.000/100 4,8 x 0,8 2.000/100BKF-F 608P6,35 x 0,8 1.000/100GK-F 608P46 (1210)BKF-F 608 6,35 x 0,8 2.000/100QuantityRKF-F 405P RKF-F 408P1,52,5 (1614)3.000/100 3.000/100Tab SizeRef.6,35 x 0,8 1.000/1006,35 x 0,8 1.500/100male connectors, fully reinforced with copper sleeve - PA6.6 insulated terminals Cond. Size sqmm (AWG)0,251,5 (2216) 1,52,5 (1614) 46 (1210)Ref.Tab SizeQuantity Box/BagRKF-M 608 6,35 x 0,8 3.000/100 BKF-M 608 6,35 x 0,8 2.500/100bullet and socket connectors fully reinforced with copper sleeve PA6.6 insulated terminalsGKF-M 608 6,35 x 0,8 1.000/100male/female connectors, fully reinforced with copper sleeve - PA6.6 insulated terminalsCond. Size sqmm (AWG)Cond. Size sqmm (AWG)0,251,5 (2216)Ref.Tab SizeQuantity Box/Bag0,251,5 (2216)BKF-FM 608 6,35 x 0,8 1.500/100QuantityRKF-BM 442.500/100RKF-BF 441.000/100BKF-BM 442.000/100BKF-BF 4RKF-FM 608 6,35 x 0,8 1.500/1001,52,5 (1614)4800/100Ref.1,52,5 (1614)mmBox/BagFEMALE CONNECTORS open barrelConductor Size sqmm (AWG)- Manufactured from brass strip - The operating temperature range is 40 to + 125C. - Recommended crimping tools are shown on pages 98, 183. 14Ref.Tab mmmmmmLQuantity0,51 (2017)RN-FA 305 RN-FA 405 RN-FA 6082,8 x 0,5 4,8 x 0,5 6,3 x 0,86,3 6,3 7,715,0 15,0 19,06.000/100 5.000/100 3.000/100BN-FA 6086,3 x 0,87,719,03.000/100* BN-FAB 6086,3 x 0,87,715,51.000/100** BN-FAR 6086,3 x 0,87,719,03.000/10012,5 (1714)MBox/Bag*flag type **with retainer 17. MALE CONNECTORS open barrelConductor Size sqmm (AWG)Ref.Tab mmmmmmLQuantity0,51 (2017)RN-MA 305 RN-MA 405 RN-MA 6082,8 x 0,5 4,8 x 0,5 6,3 x 0,85,8 6,3 7,913,0 17,3 19,76.000/100 5.000/100 4.000/10012,5 (1714)BN-MA 6086,3 x 0,87,920,04.000/100RN-MA BN-MAMBox/Bag- Manufactured from brass strip - The operating temperature range is 40 to + 125C. - Recommended crimping tool is shown on page 98, 183.MALE TABS for board mountingTab mm StudmmCmmQuantitymm6,3 x 0,8 6,3 x 0,8 6,3 x 0,84 4 48 8 88,5 8,5 8,50 45 905.000/100 6.000/100 5.000/1006,3 x 0,85805.000/100Ref.MP 608 MP 608/45 MP 608/90 * MP 608DMP MPDB14Box/Bag- Manufactured from brass strip - The operating temperature range is 40 to + 125C.*double tabCONNECTOR SLEEVESRef.ConnectorBMLmmmmmmMaterialQuantity Box/BagCFA 300Female 2,85,5718Polyethylene3.000/100* CFA 400Female 4,87,5920Polyethylene2.000/100* CFA 600Female 6,39,01124Polyethylene1.500/100** CFA2 600 Female 6,39,0922Polyethylene1.500/1001225Polyamide 6.61.000/10018Polyamide 6.61.000/1001122Polyethylene1.000/100Female 6,3 CFAR 600 frontal insertion 9,0 with retainer Female 6,3 CFAB 600 10,0 flag * CMA 600 Male 6,312,0CFA CMA* For a single cable. Colours available: Transparent: no suffix Red: add suffix R Black: add suffix N **For twin cables. Colours available: Transparent: no suffix Red: add suffix R Black: add suffix N Green: add suffix V Blue: add suffix B Yellow: add suffix G 15 18. POLYPROPYLENE INSULATED END SLEEVESPKE PKC CPKDfor flexible copper cablesThe operating temperature range is 20 to + 105C (Surge + 110C).The PKE, PKC, CPKD range of end sleeves is manufactured from tin plated electrolytic copper. Designed and developed to reinforce fine wire strands when terminating a cable into a connector block.Recommended crimping tools are shown on pages 92 to 114, 117, 144, 146, 148, 183.VALSTAR ND#2/PKE Comprising: - a selection of PKE end sleeves conductor size 16 sqmm - tool ND#2 VALSTAR ND#2/PKC Comprising: - a selection of PKC end sleeves conductor size 16 sqmm - tool ND#2Conductor Size sqmmConductor Size sqmm0,30,5 0,75 1 1,5 2,5Ref.CPKD 508 CPKD 7508 CPKD 108 CPKD 1508 CPKD 2508DimensionsmmBPL2,6 2,8 3,0 3,5 4,21,3 1,5 1,7 2,0 2,58,0 8,0 8,0 8,0 8,014,0 14,0 14,0 14,0 14,0Insulation ColourQuantity Reelwhite grey red black blue5.000 5.000 5.000 5.000 3.000PKE 308 1,9 PKE 508 2,6 PKE 7508 3,4 PKE 108 3,4 PKE 1508 3,8 1,5 PKE 1518 3,8 PKE 2508 4,4 2,5 PKE 2518 4,4 PKE 409 4,8 4,0 PKE 418 4,8 PKE 612 5,8 6,0 PKE 618 5,8 PKE 1012 7,4 10,0 PKE 1018 7,4 PKE 1612 9,3 16,0 PKE 1618 9,3 PKE 25016 10,0 25,0 PKE 25022 10,0Ref.PKC 306 PKC 308 PKC 508 0,30,5 PKC 510 PKC 7508 0,75 PKC 7512 PKC 108 1,0 PKC 112 PKC 1508 1,5 PKC 1518 PKC 2508 2,5 PKC 2518 PKC 409 4,0 PKC 418 PKC 612 6,0 PKC 618 PKC 1012 10,0 PKC 1018 PKC 1612 16,0 PKC 1618 PKC 25016 25,0 PKC 25022 PKC 35016 35,0 PKC 35025 PKC 50020 50,0 PKC 50030 70 PKC 70022 95 PKC 95025 120 PKC 120027 0,10,3Developed for use with production equipment to give a quick and reliable crimped joint. Conforms to DIN standard 46 228/4.Dimensions0,10,3 0,30,5 0,75 1,0Conductor Size sqmmInsulated chain end sleevesRef.mmBPL1,3 1,3 1,6 1,8 2,1 2,1 2,6 2,6 3,2 3,2 3,9 3,9 4,8 4,8 5,9 5,9 7,9 7,98,0 8,0 8,2 8,2 8,2 18,0 8,2 18,0 9,0 18,0 12,0 18,0 12,0 18,0 12,0 18,0 16,0 22,012,4 14,0 14,6 14,6 14,6 24,4 15,2 25,0 16,0 25,0 20,0 26,0 21,5 27,5 22,7 28,6 29,0 35,0DimensionsmmBPL1,9 1,9 2,6 2,6 3,4 3,4 3,4 3,4 3,8 3,8 3,9 3,9 4,8 4,8 5,8 5,8 7,4 7,4 9,3 9,3 10,0 10,0 12,0 12,0 13,8 13,8 16,0 18,0 21,01,3 1,3 1,3 1,3 1,6 1,6 1,8 1,8 2,1 2,1 2,6 2,6 3,2 3,2 3,9 3,9 4,8 4,8 5,9 5,9 7,9 7,9 8,9 8,9 11,0 11,0 14,3 15,7 17,56,0 8,0 8,0 10,0 8,2 12,0 8,2 12,0 8,2 18,0 8,2 18,0 9,0 18,0 12,0 18,0 12,0 18,0 12,0 18,0 16,0 22,0 16,0 25,0 20,0 30,0 22,0 25,0 27,010,4 12,4 14,0 16,0 14,6 18,4 14,6 18,4 14,6 24,4 15,2 25,0 16,0 25,0 20,0 26,0 21,5 27,5 22,7 28,6 29,0 35,0 30,0 39,0 36,0 46,0 38,0 44,0 48,0Insulation ColourQuantityyellow white blue red25.000/500 10.000/500 10.000/500 10.000/500 10.000/500 5.000/500 7.500/500 5.000/500 5.000/200 3.000/200 2.500/100 2.000/100 1.500/100 1.500/100 1.000/100 1.000/100 500/50 500/50black grey orange green brown white blackInsulation Colourlight blue orange white yellow red blue grey black ivory green brown beige olive yellow red blueBox/BagQuantity Box/Bag25.000/500 25.000/500 10.000/500 10.000/500 10.000/500 10.000/500 10.000/500 10.000/500 10.000/500 5.000/500 7.500/500 5.000/500 5.000/200 3.000/200 2.500/100 2.000/100 1.500/100 1.500/100 1.000/100 1.000/100 500/50 500/50 500/50 400/50 300/50 250/50 100/25 100/25 100/25 19. TWIN POLYPROPYLENE INSULATED END SLEEVES for fine stranded cablesConductor Size sqmmDimensionsRef.C2 x 0,5 PKET 508 PKET 7508 2 x 0,75 PKET 7512 PKET 108 2x1 PKET 112 PKET 1508 2 x 1,5 PKET 1512 PKET 2510 2 x 2,5 PKET 2512 2 x 4 PKET 412 2 x 6 PKET 614 2 x 10 PKET 1014 2 x 16 PKET 1616 Conductor Size sqmmBP4,6x2,6 5,2x2,6 5,2x2,6 5,8x3,2 5,8x3,2 6,5x3,6 6,5x3,6 7,5x4,3 7,5x4,3 9,0x5,2 10,0x7,2 13,0x7,2 18,0x9,51,5 2,1 2,1 2,6 2,6 2,6 2,6 3,2 3,2 4,2 5,3 7,0 8,88,0 8,0 12,0 8,0 12,0 8,0 12,0 10,0 12,0 12,0 14,0 14,0 16,0CBP1,5 2,1 2,1 2,6 2,6 2,6 2,6 3,2 3,2 4,2 5,3 7,0 8,88,0 8,0 12,0 8,0 12,0 8,0 12,0 10,0 12,0 12,0 14,0 14,0 16,01 1,5red2,5black2,5 2,4grey4orange green brown white6 10 16 35500 500 500 500 500 500 500 250 250 100 100 100 100Insulation ColourBagQuantity1white1,5yellow2,5red2,5 2,4blue4grey black ivory green15,0 15,0 19,0 16,0 20,0 16,0 20,0 18,0 21,0 23,0 26,0 26,0 30,0nd#4, HNKE16 and HNKE 50orangeL4,6x2,6 5,2x2,6 5,2x2,6 5,8x3,2 5,8x3,2 6,5x3,6 6,5x3,6 7,5x4,3 7,5x4,3 9,0x5,2 10,0x7,2 13,0x7,2 18,0x9,5Quantitybluemmnd#4, HNKE16 and HNKE 50white15,0 15,0 19,0 16,0 20,0 16,0 20,0 18,0 21,0 23,0 26,0 26,0 30,0Dimensions2 x 0,5 PKCT 508 PKCT 7508 PKCT 7512 PKCT 108 2x1 PKCT 112 PKCT 1508 2 x 1,5 PKCT 1512 PKCT 2510 2 x 2,5 PKCT 2512 2 x 4 PKCT 412 2 x 6 PKCT 614 2 x 10 PKCT 1014 2 x 16 PKCT 1616Insulation ColourLRef.2 x 0,75mm6 10 16 35500 500 500 500 500 500 500 250 250 100 100 100 100BagUNINSULATED END SLEEVES for flexible copper cablesConductor Size sqmm0,5 0,75 1 1,5 2,5 4 6 10 16 25 35Ref.* KE 506 ST KE 508 ST * KE 7506 ST KE 7508 ST * KE 106 ST * KE 110 ST * KE 1508 ST * KE 1510 ST * KE 2508 ST * KE 2510 ST * KE 410 ST * KE 412 ST * KE 610 ST * KE 612 ST * KE 616 ST * KE 1016 ST * KE 1616 ST KE 25012 ST * KE 25018 ST KE 35012 ST * KE 35018 STDimensions iL1,0 1,0 1,2 1,2 1,4 1,4 1,8 1,8 2,3 2,3 2,8 2,8 3,5 3,5 3,5 4,5 5,8 7,3 7,3 8,3 8,36 8 6 8 6 10 7 10 7 10 9 12 10 12 15 15 15 12 18 12 18PKET PKCTmmType PKET, PKCT ranges of twin end sleeves are manufactured from tin plated electrolytic copper. Designed to accomodate two cables terminating in the same sleeve they are ideal for looping conductors. The operating temperature range is 20 to + 105C (Surge + 110C). Recommended crimping tools are shown on pages 92 to 113, 117, 144, 146, 148, 183.KEQuantity C2,1 2,1 2,3 2,3 2,5 2,5 2,8 2,8 3,4 3,4 4,0 4,0 4,7 4,7 4,7 5,8 7,5 9,5 9,5 11,0 11,0Box/Bag50.000/500 50.000/500 50.000/500 50.000/500 25.000/500 25.000/500 25.000/500 25.000/500 25.000/500 20.000/500 12.500/500 12.500/500 10.000/500 7.500/500 5.000/500 4.000/250 3.000/250 1.500/100 1.500/100 1.500/100 1.000/100KE series end sleeves are manufactured from tin plated electrolytic copper. Designed and developed for use with flexible cables. Recommended crimping tools are shown on pages 92 to 113, 117, 144, 146, 148, 183.*To DIN standard 46 228/117 20. UNINSULATED TERMINALSSS range - brazed seamS range terminals are manufactured from electrolytic copper strip and tin plated. The seam is brazed to pro-vide uniform mechanical strength. The terminal barrel is rifled to enhance electrical con-pin terminalsConductor Size sqmm (AWG)Recommended crimping tools are shown on pages 92 to 111, 144.blade terminalsRef.S 1.5-P 8 0,251,25 (2216)tact and to improve mechanical strength.DimensionsmmQuantityiBPL1,81,68,012,0Box/BagConductor Size sqmm (AWG)Ref.S 1.5-PP 128.000/1000,251,25 *S 1.5-PP 12/1 (2216) S 1.5-PP 12/19DimensionsmmQuantity LBox/BagiBP1,83,012,817,08.000/1001,83,011,315,58.000/1001,81,913,217,48.000/1001,610,014,08.000/1001,81,612,016,28.000/100S 1.5-PP 141,83,014,819,08.000/100S 2.5-P 82,41,78,012,07.000/100S 2.5-PP 122,43,512,817,07.000/100S 2.5-P 102,41,810,014,07.000/100S 2.5-PP 12/252,42,513,317,57.000/100S 2.5-P 122,41,812,016,07.000/100S 2.5-PP 16/252,42,517,221,47.000/100S 6-P 10 46 (1210)1,8S 1.5-P 121,52,5 (1614)S 1.5-P 103,62,210,016,84.000/100S 6-PP 123,64,013,319,74.000/100S 6-PP 173,62,919,125,54.000/100S 6-P 123,62,212,019,44.000/100S 6-P 143,62,214,021,03.500/1001,52,5 (1614)46 (1210)*Made to order18 21. UNINSULATED TERMINALSSS range - brazed seamring terminalsCond. Size sqmm Stud mm (AWG)Ref.fork/spade terminalsDimensions i2 *S 1.5-M 2 1,8 3 S 1.5-M 3 1,8 3,5 S 1.5-M 3.5 1,8 3,5 *S 1.5-M 3.5/1 1,8 4 S 1.5-M 4 1,8 4 *S 1.5-M 4/3 1,8 0,251,25 1,8 (2216) 5 S 1.5-M 5 6 S 1.5-M 6 1,8 6 S 1.5-M 6/1 1,8 7 S 1.5-M 7 1,8 8 S 1.5-M 8 1,8 10 S 1.5-M 10 1,8 12 S 1.5-M 12 1,8 3 S 2.5-M 3 2,4 3,5 S 2.5-M 3.5 2,4 3,5 *S 2.5-M 3.5/1 2,4 4 S 2.5-M 4 2,4 5 S 2.5-M 5 2,4 1,52,5 6 S 2.5-M 6 2,4 (1614) 6 S 2.5-M 6/1 2,4 7 S 2.5-M 7 2,4 8 S 2.5-M 8 2,4 10 S 2.5-M 10 2,4 12 S 2.5-M 12 2,4 3 S 6-M 3 3,6 3,5 S 6-M 3.5 3,6 4 S 6-M 4 3,6 5 S 6-M 5 3,6 6 S 6-M 6 3,6 6 *S 6-M 6/1 3,6 46 7 S 6-M 7 3,6 (1210) 8 S 6-M 8 3,6 8 *S 6-M 8/1 3,6 10 S 6-M 10 3,6 10 S 6-M 10/1 3,6 12 S 6-M 12 3,6 14 S 6-M 14 3,6 16 S 6-M 16 3,6 4 S 10-M 4 4,8 10 5 S 10-M 5 4,8 (8) 6 S 10-M 6 4,8 7 S 10-M 7 4,8B5,6 5,6 5,6 6,2 7,0 7,8 7,8 9,4 12,0 9,4 12,0 15,5 18,0 5,6 5,6 6,2 8,0 8,0 9,4 12,0 10,0 12,0 15,5 18,0 8,0 8,0 9,0 9,0 11,0 11,0 11,0 13,6 11,0 13,6 15,5 19,0 21,0 24,0 11,5 11,5 11,5 11,5MN4,5 2,8 4,5 2,8 4,5 2,8 7,1 3,1 6,5 3,5 7,1 3,9 7,1 3,9 8,1 4,7 10,3 6,0 8,1 4,7 10,3 6,0 13,0 7,7 15,5 9,0 5,0 2,8 5,0 2,8 6,5 3,1 6,5 4,0 7,5 4,0 8,6 4,7 10,3 6,0 7,8 5,0 10,3 6,0 13,0 7,7 15,5 9,0 8,1 4,0 8,1 4,0 8,1 4,5 8,1 4,5 11,1 5,5 8,1 5,5 11,1 5,5 12,1 6,8 8,1 5,5 12,1 6,8 13,8 7,7 15,1 9,5 16,1 10,5 17,1 12,0 9,0 5,8 9,0 5,8 9,0 5,8 9,0 5,8mmQuantity Ld11,5 11,5 11,5 14,4 14,2 15,2 15,2 17,0 20,5 17,0 20,5 25,0 28,7 12,0 12,0 13,8 14,7 15,7 17,5 20,5 17,0 20,5 25,0 28,7 18,5 18,5 19,0 19,0 23,0 20,0 23,0 25,3 20,0 25,3 28,0 31,0 33,0 35,5 23,8 23,8 23,8 23,82,2 3,2 3,7 3,7 4,3 4,3 5,3 6,4 6,4 7,2 8,4 10,5 13,0 3,2 3,7 3,7 4,3 5,3 6,4 6,4 7,2 8,4 10,5 13,0 3,2 3,7 4,3 5,3 6,4 6,4 7,2 8,4 8,4 10,5 10,5 13,0 15,0 17,0 4,3 5,3 6,4 7,2Box/Bag7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 6.000/100 5.000/100 6.000/100 4.000/100 3.000/100 2.000/100 6.000/100 6.000/100 5.000/100 5.000/100 5.000/100 5.000/100 5.000/100 5.000/100 4.000/100 2.500/100 2.000/100 3.000/100 3.000/100 3.000/100 2.500/100 2.500/100 2.500/100 2.500/100 2.000/100 2.500/100 2.000/100 2.000/100 1.000/100 1.000/100 1.000/100 2.000/100 2.000/100 2.000/100 1.500/100Cond. Size sqmm Stud mm (AWG)Ref.Dimensions i3 S 1.5-U 3 1,8 3,5 S 1.5-U 3.5 1,8 3,5*S 1.5-U 3.5/2 1,8 4 S 1.5-U 4 1,8 4 *S 1.5-U 4/1 1,8 4 S 1.5-U 4/2 1,8 0,251,25 1,8 (2216) 5 S 1.5-U 5 5 * S 1.5-U 5/1 1,8 6 S 1.5-U 6 1,8 6 * S 1.5-U 6/1 1,8 8 S 1.5-U 8 1,8 10 S 1.5-U 10 1,8 12 S 1.5-U 12 1,8 3 S 2.5-U 3 2,4 3,5 S 2.5-U 3.5 2,4 3,5*S 2.5-U 3.5/1 2,4 4 S 2.5-U 4 2,4 4 * S 2.5-U 4/1 2,4 1,52,5 4 * S 2.5-U 4/2 2,4 (1614) 5 S 2.5-U 5 2,4 6 S 2.5-U 6 2,4 6 * S 2.5-U 6/1 2,4 8 S 2.5-U 8 2,4 10 S 2.5-U 10 2,4 12 S 2.5-U 12 2,4 3,5 S 6-U 3.5mmQuantityBMNLd5,5 6,0 6,4 6,5 8,5 7,5 8,5 9,4 9,4 12,0 14,0 17,5 20,0 5,5 6,4 7,2 6,5 8,5 7,5 8,5 9,4 12,0 14,0 17,5 20,05,5 6,5 6,5 7,5 7,5 7,5 7,5 7,5 8,1 9,2 10,0 13,0 15,5 5,5 6,5 6,5 7,5 7,5 7,5 7,5 8,1 9,2 10,0 13,0 15,54,0 3,8 3,8 3,7 3,7 3,7 3,7 3,7 4,7 7,1 6,3 7,7 9,0 4,0 3,8 3,8 3,7 3,7 3,7 3,7 4,7 7,1 6,3 7,7 9,013,7 14,5 14,5 15,4 15,4 15,4 15,4 15,4 17,0 20,5 20,5 25,0 28,7 13,7 14,5 14,5 15,4 15,4 15,4 15,4 17,0 20,5 20,5 25,0 28,73,2 3,7 3,7 4,3 4,3 4,3 5,3 5,3 6,4 6,4 8,4 10,5 13,0 3,2 3,7 3,7 4,3 4,3 4,3 5,3 6,4 6,4 8,4 10,5 13,0Box/Bag7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 6.000/100 6.000/100 3.000/100 2.500/100 2.000/100 6.000/100 6.000/100 6.000/100 5.000/100 6.000/100 6.000/100 6.000/100 5.000/100 4.000/100 2.500/100 2.000/100 2.000/1003,67,58,53,918,83,7 3.000/1004S 6-U 43,67,58,04,418,84,3 3.000/1005S 6-U 53,69,58,04,418,85,3 2.500/1006S 6-U 63,610,011,05,522,96,4 2.500/1008 46 (1210) 10S 6-U 83,613,512,08,026,48,4 2.000/100S 6-U 103,615,513,08,027,4 10,5 2.000/10010 *S 6-U 10/13,617,513,87,728,0 10,5 2.000/100S 6-U 123,621,015,19,531,0 13,0 1.000/10014 *S 6-U 143,623,016,1 10,533,0 15,0 1.000/10016 *S 6-U 163,626,017,1 11,535,0 17,0 1.000/10012*Made to order19 22. UNINSULATED TERMINALSRN BN GNRN, BN, GN range - unbrazedRN, BN. GN range terminals are manufactured from electrolytic copper strip andtin plated. The seam is unbrazed. The terminal barrel is rifledpin terminalsConductor Size sqmm (AWG)Ref.DimensionsmmQuantity Box/BagBPL1,81,68,012,0RN-P 101,81,610,014,08.000/1001,81,612,016,22,41,78,0BN-P 102,41,8BN-P 122,4GN-P 103,6Ref.DimensionsmmQuantityBP8.000/100RN-PP 12 RN-PP 12/1 RN-PP 12/19 RN-PP 14 RN-PP 16/231,8 1,8 1,8 1,8 1,83,0 3,0 1,9 3,0 2,312,8 11,3 13,2 14,8 17,217,0 15,5 17,4 19,0 21,48.000/100 8.000/100 8.000/100 8.000/100 8.000/10012,07.000/100BN-PP 122,43,512,817,07.000/10010,014,07.000/100BN-PP 12/25 2,42,513,317,57.000/1001,812,016,07.000/100BN-PP 16/25 2,42,517,221,47.000/1002,210,016,84.000/100GN-PP 123,64,013,319,74.000/100GN-PP 173,62,919,125,54.000/100GN-P 123,62,212,019,04.000/1003,62,214,021,03.500/1000,251,5 (2216)1,52,5 (1614)LBox/BagiGN-P 1420Conductor Size sqmm (AWG)8.000/100BN-P 846 (1210)iRN-P 121,52,5 (1614)Recommended crimping tools are shown on pages 92 to 111, 144.blade terminalsRN-P 8 0,251,5 (2216)to enhance electrical contact and to improve mechanical strength.46 (1210) 23. UNINSULATED TERMINALSRN BN GNRN, BN, GN range - unbrazedring terminalsCond. Size sqmm Stud mm (AWG)0,251,5 (2216)1,52,5 (1614)46 (1210)Ref.2 * RN-M 2 3 RN-M 3 3,5 RN-M 3.5 3,5 RN-M 3.5/1 4 RN-M 4 4 RN-M 4/3 5 RN-M 5 6 RN-M 6 6 RN-M 6/1 7 RN-M 7 8 RN-M 8 10 RN-M 10 12 RN-M 12 2 * BN-M 2 3 BN-M 3 3,5 BN-M 3.5 3,5 BN-M 3.5/1 4 BN-M 4 5 BN-M 5 6 BN-M 6 6 BN-M 6/1 7 BN-M 7 8 BN-M 8 10 BN-M 10 12 BN-M 12 3 GN-M 3 3,5 GN-M 3.5 4 GN-M 4 5 GN-M 5 6 GN-M 6 6 GN-M 6/1 7 GN-M 7 8 GN-M 8 8 * GN-M 8/1 10 GN-M 10 10 GN-M 10/1 12 GN-M 12 14 GN-M 14 16 GN-M 16fork/spade terminalsDimensions iB1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 2,4 2,4 2,4 2,4 2,4 2,4 2,4 2,4 2,4 2,4 2,4 2,4 3,6 3,6 3,6 3,6 3,6 3,6 3,6 3,6 3,6 3,6 3,6 3,6 3,6 3,65,6 5,6 5,6 6,2 7,0 7,8 7,8 9,4 12,0 9,4 12,0 15,5 18,0 5,6 5,6 5,6 6,2 8,0 8,0 9,4 12,0 10,0 12,0 15,5 18,0 8,0 8,0 9,0 9,0 11,0 11,0 11,0 13,6 11,0 13,6 15,5 19,0 21,0 24,0MN4,5 2,8 4,5 2,8 4,5 2,8 7,1 3,1 6,5 3,5 7,1 3,9 7,1 3,9 8,1 4,7 10,3 6,0 8,1 4,7 10,3 6,0 13,0 7,7 15,5 9,0 5,0 2,8 5,0 2,8 5,0 2,8 6,5 3,1 6,5 4,0 7,5 4,0 8,6 4,7 10,3 6,0 7,8 5,0 10,3 6,0 13,0 7,7 15,5 9,0 8,1 4,0 8,1 4,0 8,1 4,5 8,1 4,5 11,1 5,5 8,1 5,5 11,1 5,5 12,1 6,8 8,1 5,5 12,1 6,8 13,8 7,7 15,1 9,5 16,1 10,5 17,1 12,0mmQuantity Ld11,5 11,5 11,5 14,4 14,2 15,2 15,2 17,0 20,5 17,0 20,5 25,0 28,7 12,0 12,0 12,0 13,8 14,7 15,7 17,5 20,5 17,0 20,5 25,0 28,7 18,5 18,5 19,0 19,0 23,0 20,0 23,0 25,3 20,0 25,3 28,0 31,0 33,0 35,52,2 3,2 3,7 3,7 4,3 4,3 5,3 6,4 6,4 7,2 8,4 10,5 13,0 2,2 3,2 3,7 3,7 4,3 5,3 6,4 6,4 7,2 8,4 10,5 13,0 3,2 3,7 4,3 5,3 6,4 6,4 7,2 8,4 8,4 10,5 10,5 13,0 15,0 17,0Box/Bag7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 6.000/100 4.000/100 6.000/100 4.000/100 3.000/100 2.000/100 6.000/100 6.000/100 6.000/100 6.000/100 5.000/100 5.000/100 5.000/100 5.000/100 5.000/100 4.000/100 2.500/100 2.000/100 3.000/100 3.000/100 3.000/100 2.500/100 2.500/100 2.500/100 2.500/100 2.000/100 2.500/100 2.000/100 2.000/100 1.000/100 1.000/100 1.000/100Cond. Size sqmm Stud mm (AWG)Ref.DimensionsmmQuantity1,52,5 (1614)BMNLd3 RN-U 3 3,5 RN-U 3.5 3,5 RN-U 3.5/2 4 RN-U 4 4 RN-U 4/1 4 RN-U 4/2 5 RN-U 5 5 *RN-U 5/1 6 RN-U 6 6 RN-U 6/1 8 RN-U 8 10 RN-U 10 12 RN-U 12 3 BN-U 3 3,5 BN-U 3.5 3,5*BN-U 3.5/1 4 BN-U 4 4 BN-U 4/1 4 BN-U 4/2 5 BN-U 5 6 BN-U 6 6 BN-U 6/1 8 BN-U 8 10 BN-U 10 12 BN-U 121,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 1,8 2,4 2,4 2,4 2,4 2,4 2,4 2,4 2,4 2,4 2,4 2,4 2,45,5 6,0 6,4 6,5 8,5 7,5 8,5 9,4 9,4 12,0 14,0 17,5 20,0 5,5 6,4 7,2 6,5 8,5 7,5 8,5 9,4 12,0 14,0 17,5 20,05,5 6,5 6,5 7,5 7,5 7,5 7,5 7,5 8,1 9,2 10,0 13,0 15,5 5,5 6,5 6,5 7,5 7,5 7,5 7,5 8,1 9,2 10,0 13,0 15,54,0 3,8 3,8 3,7 3,7 3,7 3,7 3,7 4,7 7,1 6,3 7,7 9,0 4,0 3,8 3,8 3,7 3,7 3,7 3,7 4,7 7,1 6,3 7,7 9,013,7 14,5 14,5 15,4 15,4 15,4 15,4 15,4 17,0 20,5 20,5 25,0 28,7 13,7 14,5 14,5 15,4 15,4 15,4 15,4 17,0 20,5 20,5 25,0 28,73,2 3,7 3,7 4,3 4,3 4,3 5,3 5,3 6,4 6,4 8,4 10,5 13,0 3,2 3,7 3,7 4,3 4,3 4,3 5,3 6,4 6,4 8,4 10,5 13,03,5 GN-U 3.50,251,5 (2216)iBox/Bag7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 7.000/100 5.000/100 5.000/100 6.000/100 3.000/100 5.000/100 3.000/100 2.000/100 6.000/100 6.000/100 6.000/100 6.000/100 6.000/100 6.000/100 5.000/100 5.000/100 4.000/100 4.000/100 3.500/100 2.000/1003,67,58,53,918,83,7 3.000/1004GN-U 43,67,58,04,418,84,3 3.000/1005GN-U 53,69,58,04,418,85,3 2.500/1006GN-U 63,610,011,05,522,96,4 2.500/1008GN-U 83,613,512,08,026,48,4 2.000/10046 (1210) 10GN-U 103,615,513,08,027,4 10,5 2.000/10010GN-U 10/13,617,513,87,728,0 10,5 2.000/10012GN-U 123,621,015,19,531,0 13,0 1.000/10014GN-U 143,623,016,1 10,533,0 15,0 1.000/10016GN-U 163,626,017,1 11,535,0 17,0 1.000/100*Made to order21 24. A-MCOPPER TUBE CRIMPING LUGS for copper conductorsFile no. E125401221016253525 355035 507050 70QuantityiA 03-M 3 A 03-M 3.5 A 03-M 4 A 03-M 5 A 03-M 6 A 06-M 3 A 06-M 3.5 A 06-M 4 A 06-M 5 A 06-M 6 A 06-M 8 A 1-M 3 A 1-M 3.5 A 1-M 4 A 1-M 5 A 1-M 6 A 1-M 8 A 1-M 10 A 2-M 4 A 2-M 5 A 2-M 6 A 2-M 8 A 2-M 10 A 2-M 12 A 3-M 4 A 3-M 5 A 3-M 6 A 3-M 8 A 3-M 10 A 3-M 12 A 5-M 4 A 5-M 5 A 5-M 6 A 5-M 8 A 5-M 10 A 5-M 12 A 7-M 5 A 7-M 6 A 7-M 8 A 7-M 10 A 7-M 12 A 10-M 6 A 10-M 8 A 10-M 10 A 10-M 12 A 10-M 14 A 10-M 16 A 14-M 6 A 14-M 8 A 14-M 10 A 14-M 12 A 14-M 14 A 14-M 16BMNLd1,8 1,8 1,8 1,8 1,8 2,4 2,4 2,4 2,4 2,4 2,4 3,6 3,6 3,6 3,6 3,6 3,6 3,6 4,6 4,6 4,6 4,6 4,6 4,6 5,8 5,8 5,8 5,8 5,8 5,8 7,0 7,0 7,0 7,0 7,0 7,0 8,9 8,9 8,9 8,9 8,9 10,0 10,0 10,0 10,0 10,0 10,0 11,3 11,3 11,3 11,3 11,3 11,36,0 6,5 6,5 7,5 9,0 6,0 6,5 7,5 8,5 9,0 12,0 7,5 7,5 8,0 9,0 11,0 14,0 16,5 10,0 10,0 11,0 15,0 18,0 19,0 11,5 11,5 11,5 15,0 18,0 20,0 14,0 14,0 14,0 15,0 18,0 21,0 17,0 17,0 17,0 19,0 21,0 19,0 19,0 20,0 21,0 25,0 26,0 21,0 21,0 21,0 22,0 25,0 26,04,5 4,5 5,0 5,5 6,0 4,5 4,5 5,0 5,5 6,0 9,0 4,5 4,5 5,0 6,5 7,0 9,0 11,0 5,0 6,5 7,0 9,0 11,0 14,0 5,0 6,5 7,0 9,0 11,0 14,0 5,0 6,5 7,0 9,0 11,0 14,0 6,5 7,0 9,0 11,0 14,0 8,0 9,0 11,5 12,0 16,0 18,0 8,0 9,0 11,0 14,0 16,0 18,03,5 3,5 4,0 4,5 5,0 3,5 3,5 4,0 4,5 5,0 8,0 3,5 3,5 4,0 6,0 6,0 8,0 10,0 4,0 6,0 6,0 8,0 10,0 12,0 4,0 6,0 6,0 8,0 10,0 12,0 4,0 6,0 6,0 8,0 10,0 12,0 6,0 6,0 8,0 10,0 12,0 7,0 8,0 9,5 12,0 14,0 16,0 7,0 8,0 10,0 12,0 14,0 16,016,0 16,0 17,0 18,0 19,0 17,0 17,0 18,0 19,0 20,0 26,0 20,5 20,5 21,5 25,0 25,5 29,5 33,5 22,5 26,0 26,5 30,5 34,5 39,5 25,5 29,0 29,5 33,5 37,5 42,5 28,0 31,5 32,0 36,0 40,0 45,0 34,0 34,5 38,5 42,5 47,5 38,5 40,5 44,5 47,5 55,5 59,5 44,0 46,0 50,0 55,0 59,0 63,03,2 3,7 4,3 5,3 6,4 3,2 3,7 4,3 5,3 6,4 8,4 3,2 3,7 4,3 5,3 6,4 8,4 10,5 4,3 5,3 6,4 8,4 10,5 13,2 4,3 5,3 6,4 8,4 10,5 13,2 4,3 5,3 6,4 8,4 10,5 13,2 5,3 6,4 8,4 10,5 13,2 6,4 8,4 10,5 13,2 15,0 17,0 6,4 8,4 10,5 13,2 15,0 17,0Box/Bag5.000/100 5.000/100 5.000/100 5.000/100 5.000/100 4.000/100 4.000/100 4.000/100 4.000/100 4.000/100 2.500/100 2.000/100 2.000/100 2.000/100 2.000/100 2.000/100 1.500/100 1.000/100 1.500/100 1.500/100 1.500/100 1.000/100 1.000/100 500/100 1.000/100 1.000/100 1.000/100 500/100 500/100 500/100 1.000/100 500/100 500/100 500/100 500/100 500/100 500/100 500/100 400/100 400/100 300/50 200/50 200/50 200/50 200/50 200/50 200/50 200/50 200/50 200/50 150/50 100/50 100/50Mechanical ToolsHydraulic ToolsB 15DmmB 35-45D B 35-50D HT 45-E HT 51 RH 50 B 51 B 55 HT 81-U RHU 81 HT 120 and tools and heads with 130 kN crimping force ECW-H3D RHU 520463 3,5 4 5 6 3 3,5 4 5 6 8 3 3,5 4 5 6 8 10 4 5 6 8 10 12 4 5 6 8 10 12 4 5 6 8 10 12 5 6 8 10 12 6 8 10 12 14 16 6 8 10 12 14 16DimensionsRef.TN 70 SE1,52,5mmTN 120 SE0,251,5StudHN1low stranded flexible*HN5Cond. Size sqmmHN-A25A-M series lugs are manufactured from electrolytic copper tube. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out. Cembre lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the severe deformation arising when compressed and any bending of the palm during installation. In applications subject to vibration, lugs still have to provide a reliable connection and annealing plays a vital role in avoiding cracking or breaks between the barrel and palm. The presence of an inspection hole facilitates full insertion of the conductor, whilst the barrel length has been designed to allow easy and accurate positioning of the dies during the crimping operation. Lugs are electrolytically tinplated to avoid oxidation. A-M series lugs form an important part of Cembre crimping systems for power carrying conductors, details of the appropriate crimping tools and dies are shown opposite and in detail on pages 186 to 187. Our technicians are always available to provide any technical advice which may be required. The enclosed table is only indicative of the range and many variations in stud fixing and palm lengths are also available. 25. COPPER TUBE CRIMPING LUGS for copper conductorsA-MFile no. E12540170 9512095 120150120 150185150 185240185 240300240 300400300 400500 630 800400 500 500 630 6301000 800mm6 8 10 12 14 16 20 8 10 12 14 16 20 8 10 12 14 16 20 8 10 12 14 16 20 8 10 12 14 16 20 10 12 14 16 20 12 14 16 20 16 20 16 20 16 20 16 20DimensionsRef.mmQuantityiA 19-M 6 A 19-M 8 A 19-M 10 A 19-M 12 A 19-M 14 A 19-M 16 A 19-M 20 A 24-M 8 A 24-M 10 A 24-M 12 A 24-M 14 A 24-M 16 A 24-M 20 A 30-M 8 A 30-M 10 A 30-M 12 A 30-M 14 A 30-M 16 A 30-M 20 A 37-M 8 A 37-M 10 A 37-M 12 A 37-M 14 A 37-M 16 A 37-M 20 A 48-M 8 A 48-M 10 A 48-M 12 A 48-M 14 A 48-M 16 A 48-M 20 A 60-M 10 A 60-M 12 A 60-M 14 A 60-M 16 A 60-M 20 A 80-M 12 A 80-M 14 A 80-M 16 A 80-M 20 A 100-M 16 A 100-M 20 A 120-M 16 A 120-M 20 A 160-M 16 A 160-M 20 A 200-M 16 A 200-M 20BMNLd13,5 13,5 13,5 13,5 13,5 13,5 13,5 15,2 15,2 15,2 15,2 15,2 15,2 16,7 16,7 16,7 16,7 16,7 16,7 19,2 19,2 19,2 19,2 19,2 19,2 21,1 21,1 21,1 21,1 21,1 21,1 23,7 23,7 23,7 23,7 23,7 27,0 27,0 27,0 27,0 30,3 30,3 33,4 33,4 38,0 38,0 44,0 44,025,0 25,0 25,0 25,0 25,0 27,0 29,5 28,5 28,5 28,5 28,5 28,5 30,0 31,5 31,5 31,5 31,5 31,5 31,5 35,5 35,5 35,5 35,5 35,5 35,5 39,0 39,0 39,0 39,0 39,0 39,0 44,0 44,0 44,0 44,0 44,0 51,0 51,0 51,0 51,0 56,5 56,5 61,6 61,6 72,0 72,0 80,0 80,08,0 9,0 11,0 14,0 16,0 18,0 22,0 9,0 11,0 14,0 16,0 18,0 22,0 13,0 13,0 16,0 18,0 19,0 22,0 13,0 13,0 16,0 18,0 19,0 22,0 13,0 13,0 14,0 18,0 19,0 22,0 20,0 20,0 22,0 22,0 24,0 22,0 22,0 22,0 24,0 22,0 24,0 22,0 24,0 24,0 24,0 24,0 24,07,0 8,0 10,0 12,0 14,0 16,0 20,0 8,0 10,0 12,0 14,0 16,0 20,0 11,0 11,0 14,0 16,0 17,0 20,0 11,0 11,0 14,0 16,0 17,0 20,0 11,0 11,0 12,0 16,0 17,0 20,0 11,0 14,0 16,0 19,0 23,0 19,0 19,0 19,0 23,0 19,0 23,0 19,0 23,0 19,0 23,0 19,0 23,050,5 52,5 56,5 61,5 65,5 69,5 77,5 54,0 58,0 63,0 67,0 71,0 79,0 69,0 69,0 75,0 79,0 81,0 87,0 76,0 76,0 82,0 86,0 88,0 94,0 77,5 77,5 79,5 92,0 94,0 100,0 96,0 99,0 103,0 106,0 112,0 113,0 113,0 113,0 119,0 117,0 123,0 128,0 134,0 141,0 145,0 158,0 162,06,4 8,4 10,5 13,2 15,0 17,0 21,0 8,4 10,5 13,2 15,0 17,0 21,0 8,4 10,5 13,2 15,0 17,0 21,0 8,4 10,5 13,2 15,0 17,0 21,0 8,4 10,5 13,2 15,0 17,0 21,0 10,5 13,2 15,0 17,0 21,0 13,2 15,0 17,0 21,0 17,0 21,0 17,0 21,0 17,0 21,0 17,0 21,0Box/BagMechanical Tools100/25 100/25 100/25 100/25 100/25 100/25 50/25 100/25 100/25 100/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 40/20 40/20 30/15 30/15 30/15 30/15 30/15 30/15 30/15 30/15 30/15 20/10 20/10 20/10 20/10 20/10 15/1 15/1 15/1 15/1 15/1 15/1 12/1 10/1 6/1 6/3 6/1 6/1Hydraulic ToolsRH 50 B 51 B 55 HT 81-U RHU 81 HT 120 and tools and heads with 130 kN crimping force ECW-H3D RHU 52095StudHT 51low stranded flexible*TN 120 SE** B 35-45D B 35-50D HT 45-ECond. Size sqmm*Actual conductor section may require a larger lug eg for 120mm2 size use A30-... lug. **See page 10523 26. A-MRING TONGUE TERMINALS WITH CONTAINED PALM for L.V. circuit breakers for copper conductorsFile no. E1254012410 16 25 35 50 70 95 120 150 185 240 3005 5 5 6 6 6 8 8 10 8 10 10 10 12 16 10 12Dimensions Ref.A 2-M 5/9 A 3-M 5/9 A 5-M 5/9 A 7 B-M 6/11.5 A 10 B-M 6/11.5 A 14 B-M 6/11.5 A 19 B-M 8/15.5 A 24 B-M 8/19 A 24 B-M 10/19 A 30 B-M 8/19 A 30 B-M 10/19 A 37 B-M 10/24.5 A 48-M 10/31 A 48-M 12/31 A 48-M 16/31 A 60 B-M 10/31 A 60 B-M 12/31Details of the appropriate crimping tools and dies are shown on pages 186 to 187.i4,6 5,8 7,0 8,9 10,0 11,3 13,5 15,2 15,2 16,7 16,7 19,2 21,1 21,1 21,1 23,7 23,7B9,0 9,0 9,0 11,5 11,5 11,5 15,5 19,0 19,0 19,0 19,0 24,5 31,0 31,0 31,0 31,0 31,0M6,5 6,5 6,5 8,0 8,0 8,0 9,0 14,0 14,0 18,0 18,0 18,0 13,0 16,0 19,0 16,0 16,0N6,0 6,0 6,0 7,0 7,0 7,0 8,0 9,0 9,0 9,0 9,0 9,0 9,0 12,0 17,0 12,0 12,0mm L26,0 29,0 31,5 36,5 40,5 44,0 52,5 60,0 60,0 70,0 70,0 77,0 80,0 86,0 94,0 95,0 95,0Quantity dBox/Bag5,3 1000/100 5,3 1000/100 5,3 500/100 6,4 400/100 6,4 200/50 6,4 200/50 8,4 100/25 8,4 100/25 10,5 100/25 8,4 50/25 10,5 50/25 10,5 50/25 10,5 30/15 13,2 30/15 17,0 30/15 10,5 20/10 13,2 20/10Mechanical ToolsHydraulic ToolsHN5 HN-A25 TN 70 SE TN 120 SE B 15D B 35-45D B 35-50D HT 45-E HT 51 RH 50 B 51 B 55 HT 81-U RHU 81 HT 120 and tools and heads with 130 kN crimping force ECW-H3DThis range of terminals features contained palm width and has been specifically developed for application on L.V. circuit breakers with reduced space terminal blocks. The contained palm width allows an immediate and easier installation. Cembre terminals are manufactured from electrolytic copper tube. The specifically designed section of the barrel and the choice of principal dimensions are optimising the best combination of mechanical strength and electrical conductivity. These terminals are annealed to guarantee optimum ductility and are electrolytically tin-plated to avoid oxidation. The barrel is provided with an internal taper to ease the introduction of the conductor; furthermore, its length grants a comfortable and correct positioning between dies, during crimping operations. Each palm is marked with the Cembre logo and part number. Cond. Size Flexible Stud sqmm mm 27. COPPER TUBE CRIMPING LUGS ANGLED 90 for copper conductorsA-LFile no. E125401253525 355035 507050 709570 9595 120 120 150 150 150 185 185 185 240 240 120300240 300mmQuantity Box/BagBMNAdA 1-L 6 A 2-L 5 A 2-L 6 A 2-L 8 A 3-L 5 A 3-L 6 A 3-L 8 A 3-L 10 A 5-L 6 A 5-L 8 A 5-L 10 A 7-L 6 A 7-L 8 A 7-L 10 A 7-L 12 A 10-L 6 A 10-L 8 A 10-L 10 A 10-L 12 A 14-L 8 A 14-L 10 A 14-L 12 A 14-L 16 A 19-L 8 A 19-L 10 A 19-L 12 A 24-L 10 A 24-L 12 A 30-L 10 A 30-L 12 A 37-L 10 A 37-L 123,6 4,6 4,6 4,6 5,8 5,8 5,8 5,8 7,0 7,0 7,0 8,9 8,9 8,9 8,9 10,0 10,0 10,0 10,0 11,3 11,3 11,3 11,3 13,5 13,5 13,5 15,2 15,2 16,7 16,7 19,2 19,211,0 10,0 11,0 15,0 11,5 11,5 15,0 18,0 14,0 15,0 18,0 17,0 17,0 19,0 21,0 19,0 19,0 20,0 21,0 21,0 21,0 22,0 26,0 25,0 25,0 25,0 28,5 28,5 31,5 31,5 31,5 31,57,0 6,5 7,0 9,0 6,5 7,0 9,0 11,0 7,0 9,0 11,0 7.0 9,0 11,0 14,0 8,0 9,0 11,5 12,0 9,0 11,0 14,0 18,0 9,0 11,0 14,0 11,0 14,1 13,0 16,0 13,0 16,06,0 6,0 6,0 8,0 6,0 6,0 8,0 10,0 6,0 8,0 10,0 6,0 8,0 10,0 12,0 7,0 8,0 9,5 12,0 8,0 10,0 12,0 16,0 8,0 10,0 12,0 10,0 12,0 11,0 14,0 11,0 14,09,5 10,5 10,5 10,5 12,0 12,0 12,0 12,0 13,0 13,0 13,0 15,5 15,5 15,5 15,5 18,5 18,5 18,5 18,5 20,0 20,0 20,0 20,0 24,5 24,5 24,5 25,5 25,5 28,5 28,5 31,5 31,56,4 5,3 6,4 8,4 5,3 6,4 8,4 10,5 6,4 8,4 10,5 6,4 8,4 10,5 13,2 6,4 8,4 10,5 13,2 8,4 10,5 13,2 17,0 8,4 10,5 13,2 10,5 13,2 10,5 13,2 10,5 13,212A 48-L 1221,1 39,0 16,0 14,0 33,0 13,230/1512A 60-L 1223,7 39,0 20,0 14,0 42,0 13,2Mechanical Tools20/102.000/100 1.500/100 1.500/100 500/100 1.000/100 1.000/100 1.000/100 500/100 500/100 500/100 500/100 500/100 300/100 400/100 300/100 300/100 300/100 200/50 200/50 200/50 200/50 150/50 150/50 100/25 100/25 100/25 50/25 50/25 50/25 50/25 50/25 50/25*Actual conductor section may require a larger lug eg for 120mm2 size use A30-... lug. **See page 105Hydraulic ToolsB 15DiB 35-45D B 35-500 HT 45-E HT 51 RH 50 B 51 B 55 HT 81-U RHU 81 HT 120 and tools and heads with 130 kN crimping force ECW-H3D RHU 520166 5 6 8 5 6 8 10 6 8 10 6 8 10 12 6 8 10 12 8 10 12 16 8 10 12 10 12 10 12 10 12DimensionsTN 70 SE10Ref.TN 120 SE**6 Stud mmHN1low stranded flexible*HN5 HN-A25Cond. Size sqmmA-L series lugs angled 90 are manufactured from electrolytic copper tube. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out. Cembre lugs are annealed to guarantee optimum ductility which is an absolute necessity for connectors which will have to withstand the severe deformation arising when compressed and any bending of the palm during installation. In applications subject to vibration, terminals still have to perform a reliable connection, annealing plays a vital role in avoiding cracking or breaks between the barrel and palm. The presence of an inspection hole facilitates full insertion of the conductor, whilst the barrel length has been designed to allow easy and accurate positioning of the dies during the crimping operation. Lugs are electrolytically tinplated to avoid oxidation. Details of the appropriate crimping tools and dies are shown on pages 186 to 187.25 28. 355063 7095120 125150185240300400500 630 800 1000**See page 10526QuantityMNLd5,8 5,8 7,0 7,0 7,0 8,9 8,9 8,9 10,0 10,0 10,0 10,0 11,3 11,3 11,3 11,3 13,5 13,5 13,5 13,5 13,5 15,2 15,2 15,2 15,2 15,2 16,7 16,7 16,7 16,7 16,7 19,2 19,2 19,2 19,2 21,1 21,1 21,1 21,1 23,7 23,7 23,7 23,7 27,0 27,0 27,0 27,0 30,3 30,3 33,4 33,4 38,0 44,015,0 18,0 15,0 18,0 21,0 17,0 19,0 21,0 20,0 21,0 25,0 26,0 21,0 22,0 25,0 26,0 25,0 25,0 25,0 27,0 29,5 28,5 28,5 28,5 28,5 30,0 31,5 31,5 31,5 31,5 31,5 35,5 35,5 35,5 35,5 39,0 39,0 39,0 39,0 44,0 44,0 44,0 44,0 51,0 51,0 51,0 51,0 56,5 56,5 61,5 61,5 72,0 80,09,0 11,0 9,0 11,0 14,0 9,0 11,0 14,0 11,0 14,0 16,0 18,0 11,0 14,0 16,0 18,0 11,0 14,0 16,0 18,0 22,0 11,0 14,0 16,0 18,0 22,0 13,0 16,0 18,0 19,0 22,0 16,0 18,0 19,0 22,0 16,0 18,0 19,0 22,0 20,0 22,0 22,0 24,0 22,0 22,0 22,0 24,0 22,0 24,0 22,0 24,0 24,0 24,08,0 10,0 8,0 10,0 12,0 8,0 10,0 12,0 10,0 12,0 14,0 16,0 10,0 12,0 14,0 16,0 10,0 12,0 14,0 16,0 20,0 10,0 12,0 14,0 16,0 20,0 11,0 14,0 16,0 17,0 20,0 14,0 16,0 17,0 20,0 14,0 16,0 17,0 20,0 14,0 16,0 19,0 23,0 19,0 19,0 19,0 23,0 19,0 23,0 19,0 23,0 23,0 23,043,5 47,5 51,0 55,0 60,0 53,0 57,0 62,0 63,0 68,0 72,0 76,0 70,0 75,0 79,0 83,0 76,5 81,5 85,5 90,5 97,5 82,0 87,0 91,0 95,0 103,0 92,0 98,0 102,0 104,0 110,0 108,0 112,0 114,0 120,0 109,0 113,0 115,0 121,0 129,5 133,5 136,5 142,5 140,0 140,0 140,0 146,0 147,0 153,0 159,0 165,0 187,0 202,08,4 10,5 8,4 10,5 13,2 8,4 10,5 13,2 10,5 13,2 15,0 17,0 10,5 13,2 15,0 17,0 10,5 13,2 15,0 17,0 21,0 10,5 13,2 15,0 17,0 21,0 10,5 13,2 15,0 17,0 21,0 13,2 15,0 17,0 21,0 13,2 15,0 17,0 21,0 13,2 15,0 17,0 21,0 13,2 15,0 17,0 21,0 17,0 21,0 17,0 21,0 21,0 21,0Box/Bag600/100 500/100 400/100 300/50 300/50 250/50 250/50 200/50 200/50 150/50 150/50 150/50 100/50 100/50 100/50 100/50 75/25 75/25 75/25 75/25 75/25 50/25 50/25 50/25 50/25 50/25 50/25 30/15 30/15 30/15 30/15 30/15 30/15 30/15 30/15 20/5 20/5 20/5 25/5 20/5 20/5 20/5 20/5 15/5 10/5 10/5 15/5 10/1 10/1 20/1 20/1 12/1 6/1Mechanical ToolsHydraulic Tools B 15D2 A 3-M 8 2 A 3-M10 2 A 5-M 8 2 A 5-M 10 2 A 5-M 12 2 A 7-M 8 2 A 7-M 10 2 A 7-M 12 2 A 10-M 10 2 A 10-M 12 2 A 10-M 14 2 A 10-M 16 2 A 14-M 10 2 A 14-M 12 2 A 14-M 14 2 A 14-M 16 2 A 19-M 10 2 A 19-M 12 2 A 19-M 14 2 A 19-M 16 2 A 19-M 20 2 A 24-M 10 2 A 24-M 12 2 A 24-M 14 2 A 24-M 16 2 A 24-M 20 2 A 30-M 10 2 A 30-M 12 2 A 30-M 14 2 A 30-M 16 2 A 30-M 20 2 A 37-M 12 2 A 37-M 14 2 A 37-M 16 2 A 37-M 20 2 A 48-M 12 2 A 48-M 14 2 A 48-M 16 2 A 48-M 20 2 A 60-M 12 2 A 60-M 14 2 A 60-M 16 2 A 60-M 20 2 A 80-M 12 2 A 80-M 14 2 A 80-M 16 2 A 80-M 20 2 A 100-M 16 2 A 100-M 20 2 A 120-M 16 2 A 120-M 20 2 A 160-M 20 2 A 200-M 20mmBB 35-45D B 35-500 HT 45-E B 55258 10 8 10 12 8 10 12 10 12 14 16 10 12 14 16 10 12 14 16 20 10 12 14 16 20 10 12 14 16 20 12 14 16 20 12 14 16 20 12 14 16 20 12 14 16 20 16 20 16 20 20 20Dimensions iHT 51 RH 50 B 51 HT 81-U RHU 81 HT 120 and tools and heads with 130 kN crimping force ECW-H3D RHU 5202A-2M series terminals with double stud hole palm are also available, please consult us.16Ref.TN 70 SE2A-M series terminals are made from high purity copper tube, and are annealed. They feature a double length barrel for enhanced electrical and mechanical performance in heavy duty applications. The absence of an inspection hole prevents the entry of water or moisture into the crimped joint making these terminals suitable for outdoor applications. The terminals are electrolytically tin plated to prevent atmospheric corrosion. Details of the appropriate crimping tools and dies are shown on pages 186 to 187. Stud mmTN 120 SE*Conductor Size sqmmHN5 HN-A252A-MHEAVY DUTY COPPER TUBE TERMINALS 29. THROUGH CONNECTORSL-MFile no. E125401L 03-M L 06-M L 1-M L 2-M L 3-M L 5-M L 7-M L 10-M L 14-M L 19-M L 24-M L 30-M L 37-M L 48-M L 60-M L 80-M L 100-M L 120-M L 160-M L 200-MQuantityMechanical ToolsBox/BagiL1,8 2,4 3,6 4,6 5,8 7,0 8,9 10,0 11,3 13,5 15,2 16,7 19,2 21,1 23,7 27,0 30,3 33,4 38,0 44,015 15 22 25 27 29 33 37 39 43 47 58 64 75 90 94 98 105 112 1206.000/100 4.000/100 2.000/100 1.000/100 1.000/100 500/100 400/100 200/50 200/50 100/25 100/25 50/25 50/25 30/15 20/10 20/5 12/1 12/1 9/1 6/1Hydraulic ToolsB 15D B 35-45D B 35-50D HT 45-E HT 51 RH 50 B 51 B 55 HT 81-U RHU 81 HT 120 and tools and heads with 130 kN crimping force ECW-H3D RHU 5200,251,5 1,52,5 46 10 16 25 2535 3550 5070 7095 95120 120150 150185 185240 240300 300400 400500 500630 600 800mmHN-A25 TN 70 SE TN 120 SE*Flexible0,251,5 1,52,5 46 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800 1000DimensionsHN 1low strandedRef.HN 5Conductor Size sqmmL-M range of connectors are designed for jointing low voltage conductors. Made of electrolytic copper tube having the same dimension as A-M series lugs: L-M connectors are annealed and electrolytically tin plated. They feature an internal taper at both ends to ease the introduction of the conductor and a central stop to ensure correct positioning. Details of the appropriate crimping tools and dies are shown on pages 186 to 187.**See page 105PARALLEL CONNECTORS0,251,5 1,52,5 46 10 16 25 2535 3550 5070 7095 95120 120150 150185 185240 240300L 03-P L 06-P L 1-P L 2-P L 3-P L 5-P L 7-P L 10-P L 14-P L 19-P L 24-P L 30-P L 37-P L 48-P L 60-PDimensionsmmiL1,8 2,4 3,6 4,6 5,8 7,0 8,9 10,0 11,3 13,5 15,2 16,7 19,2 21,1 23,76,0 6,0 9,0 10,5 11,5 13,0 14,0 16,0 18,0 19,0 22,0 26,5 26,5 34,0 43,0QuantityMechanical ToolsBox/Bag10.000/100 5.000/100 3.000/100 3.000/100 2.000/100 1.500/100 500/100 500/100 500/100 300/50 200/50 100/50 100/50 60/15 50/25Hydraulic ToolsB 15D0,251,5 1,52,5 46 10 16 25 35 50 70 95 120 150 185 240 300Ref.B 35-45D B 35-50D HT 45-E HT 51 RH 50 B 51 B 55 HT 81-U RHU 81 HT 120 and tools and heads with 130 kN crimping force ECW-H3D RHU 520FlexibleHN 1low strandedHN 5 HN-A25 TN 7O SE TN 120 SE*Total Conductor Size sqmmL-PMade of electrolytic copper tube, having the same dimensions as A-M series lugs, L-P connectors are annealed and electrolytically tin plated. They feature an internal taper to ease the introduction of the conductor. Details of the appropriate crimping tools and dies are shown on pages 186 to 187.**See page 10527 30. 507095120150284,0 6,0 6,0 8,0 10,0 12,0 4,0 6,0 6,0 8,0 10,0 12,0 4,0 6,0 6,0 8,0 10,0 12,0 6,0 8,0 10,0 12,0 7,0 8,0 9,5 12,0 7,0 8,0 10,0 12,0 14,0 8,0 10,0 12,0 14,0 16,0 10,0 12,0 14,0 16,0 14,0 16,0 17,0 20,034,1 37,6 38,1 42,1 46,1 51,1 38,6 42,1 42,6 46,6 50,6 55,6 41,0 44,5 45,0 49,0 53,0 58,0 50,0 54,0 58,0 63,0 53,0 55,0 59,0 62,0 61,0 63,0 67,0 72,0 76,0 73,0 77,0 82,0 86,0 80,0 77,7 86,5 88,5 90,5 101,0 105,0 107,0 113,04,3 5,3 6,4 8,4 10,5 13,2 4,3 5,3 6,4 8,4 10,5 13,2 4,3 5,3 6,4 8,4 10,5 13,2 6,4 8,4 10,5 13,2 6,4 8,4 10,5 13,2 6,4 8,0 10,5 13,2 15,0 8,4 10,5 13,2 15,0 17,0 10,5 13,2 15,0 17,0 13,2 15,0 17,0 21,0500/100 500/100 500/100 500/100 500/100 500/100 500/100 500/100 500/100 500/100 400/100 300/100 300/100 300/100 300/100 300/100 300/100 250/50 200/50 200/50 200/50 200/50 200/50 200/50 150/50 150/50 100/25 100/25 100/25 100/25 100/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 30/15 30/15 30/15 30/15ECW-H3D5,0 6,5 7,0 9,0 11,0 14,0 5,0 6,5 7,0 9,0 11,0 14,0 5,0 6,5 7,0 9,0 11,0 14,0 7,0 9,0 11,0 14,0 8,0 9,0 11,5 12,0 8,0 9,0 11,0 14,0 16,0 9,0 11,0 14,0 16,0 18,0 11,0 14,0 16,0 18,0 16,0 18,0 19,0 22,0Hydraulic ToolsB 5510,0 10,0 11,0 15,0 18,0 19,0 11,5 11,5 11,5 15,0 18,0 20,0 14,0 14,0 14,0 15,0 18,0 21,0 17,0 17,0 19,0 21,0 19,0 19,0 20,0 21,0 21,0 21,0 21,0 22,0 25,0 25,0 25,0 25,0 25,0 27,0 28,5 28,5 28,5 28,5 31,5 31,5 31,5 31,5Mechanical ToolsB 518,0 8,0 8,0 8,0 8,0 8,0 9,2 9,2 9,2 9,2 9,2 9,2 11,1 11,1 11,1 11,1 11,1 11,1 13,6 13,6 13,6 13,6 13,8 13,8 13,8 13,8 15,8 15,8 15,8 15,8 15,8 18,0 18,0 18,0 18,0 18,0 20,0 20,0 20,0 20,0 23,0 23,0 23,0 23,0Box/BagRH 50dB 15DLHT 5135NHT 120 and tools and heads with 130 kN crimping force25QuantityMB 35-50D16ANE 2-M 4 ANE 2-M 5 ANE 2-M 6 ANE 2-M 8 ANE 2-M 10 ANE 2-M 12 ANE 3-M 4 ANE 3-M 5 ANE 3-M 6 ANE 3-M 8 ANE 3-M 10 ANE 3-M 12 ANE 5-M 4 ANE 5-M 5 ANE 5-M 6 ANE 5-M 8 ANE 5-M 10 ANE 5-M 12 ANE 7-M 6 ANE 7-M 8 ANE 7-M 10 ANE 7-M 12 ANE 10-M 6 ANE 10-M 8 ANE 10-M 10 ANE 10-M 12 ANE 14-M 6 ANE 14-M 8 ANE 14-M 10 ANE 14-M 12 ANE 14-M 14 ANE 19-M 8 ANE 19-M 10 ANE 19-M 12 ANE 19-M 14 ANE 19-M 16 ANE 24-M 10 ANE 24-M 12 ANE 24-M 14 ANE 24-M 16 ANE 30-M 12 ANE 30-M 14 ANE 30-M 16 ANE 30-M 20mmBTNN 70104 5 6 8 10 12 4 5 6 8 10 12 4 5 6 8 10 12 6 8 10 12 6 8 10 12 6 8 10 12 14 8 10 12 14 16 10 12 14 16 12 14 16 20Dimensions TNN 120ANE-M series lugs are manufactured from electrolytic copper tube annealed and tin plated. The interior of the PA6.6 insulated sleeve is funnel shaped so as to ensure complete and easy introduction of the conductor strands. It also eliminates the need to insulate the terminal using either tape or heat shrinkable tubing. Furthermore the PA6.6 sleeve avoids the possibility of conductor breakage at the barrel entrance. The items tabulated all feature black insulated sleeves however other colours are available, please consult us. The operating temperature range is 20 to + 115C (Surge + 130C). In order to achieve the best electrical and mechanical performance it is suggested that they are crimped using dies and tools specifically developed for this purpose by Cembre. Details of the appropriate crimping tools and dies are shown on pages 188 to 189.Ref.HNN3Cond. Size Flexible Stud sqmm mmHNN4ANE-MPOLYAMIDE PA6.6 INSULATED COPPER TUBE LUGS 31. POLYAMIDE PA6.6 INSULATED FORK TERMINALSL7,0 7,0 8,0 8,0d35,1 35,1 41,1 41,14,3 5,3 4,3 5,3Box/Bag500/100 500/100 500/100 500/100ECW-H3D9,8 7,5 11,5 7,5 10,0 10,0 11,5 10,0NHydraulic Tools HT 51 RH 50 B 51 B 55 HT 120 and tools and heads with 130 kN crimping force8,0 8,0 9,2 9,2MMechanical ToolsB 15DANE 2-U 4 ANE 2-U 5 ANE 3-U 4 ANE 3-U 5BQuantityB 35-50D164 5 4 5mmTNN 70 TNN 12010DimensionsRef.HNN 3 HNN 4Conductor Size Flexible Stud sqmm mmANE-UANE-U series terminals are made from electrolytic copper, rolled, tin plated and brazed. The interior of the PA6.6 insulated sleeve is funnel shaped so as to ensure complete and easy introduction of the conductor strands.FLEXIBLE BRAIDSSize sqmm101625 Stud mmRef.8 8 8 8 8 8 8 8 8 8 8 8 8 8 8FL 10-150 FL 10-200 FL 10-250 FL 16-150 FL 16-200 FL 16-250 FL 16-320 FL 16-350 FL 16-420 FL 16-570 FL 16-660 FL 25-150 FL 25-200 FL 25-250 FL 25-300Dimensions B17 17 17 17 17 17 17 17 17 17 17 21 21 21 21N10 10 10 10 10 10 10 10 10 10 10 10 10 10 10L150 200 250 150 200 250 320 350 420 570 660 150 200 250 300mm d8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5Quantity50 50 50 50 50 50 50 50 25 25 25 50 50 50 50Flexible braids are manufactured from electrolytic copper wire. Braids of different conductor sizes or lengths are available on request. Standard finish - bright copper.The operating temperature range is 20 to + 115C (Surge + 130C). In order to achieve the best electrical and mechanical performance it is suggested that they are crimped using dies and tools specifically developed for this purpose by Cembre. Details of the appropriate crimping tools and dies are shown on pages 188 to 189.FLFlexible braids can be supplied tin plated, in this case add the suffix ST to reference. E.g.: - FL 10-150 (Bright copper) - FL 10-150-ST (Tin plated)29 32. A-PA-P series pin connectors are designed to terminate conductors into contact blocks. They are manufactured from copper strip, rolled, brazed and tin plated. Details of the appropriate crimping tools and dies are shown on pages 186 to 187.30mmQuantity Box/BagBPL8,0 9,2 11,1 13,64,3 5,5 7,0 8,014,5 18,0 20,3 24,535,1 41,1 45,0 55,0500/100 500/100 300/100 200/50Mechanical Tools HNN 3HNN 4Hydraulic Tools ECW-H3DANE 2-P 12 ANE 3-P 14 ANE 5-P 16 ANE 7-P 2010 16 25 35Dimensions HT 120 and tools and heads with 130 kN crimping forceRef.TNN 70 TNN 120 B 15D B 35-50D HT 51 RH 50 B 51 B 55Conductor Size Flexible sqmmDetails of the appropriate crimping tools and dies are shown on pages 188 to 189.UNINSULATED PIN CONNECTORSCond. Size sqmm low strandedflexible*10 16 25 35 50 7010 16 25 2535 3550 5070Ref.A 2-P 12 A 3-P 14 A 5-P 16 A 7-P 20 A 10-P 25 A 14-P 30DimensionsmmQuantityiBPL4,8 5,9 7,0 8,9 10,0 11,54,3 5,5 7,0 8,0 9,5 11,014,5 18,0 20,3 24,5 26,0 31,023,5 28,0 32,0 39,0 45,0 55,0Box/Bag1.000/100 1.500/100 1.000/100 500/100 250/50 200/50Mechanical Tools HN 1Hydraulic ToolsTN 70 SE TN 120 SE B 15D B 35-45D HT 45-E HT 45 HT 51 RH 50 B 51 B 55 HT 120 and tools and heads with 130 kN crimping force ECW-H3DANE-P series terminals are made from electrolytic copper, rolled, tin plated and brazed. The interior of the PA6.6 insulated sleeve is funnel shaped so as to ensure complete and easy introduction of the conductor strands. The operating temperature range is 20 to + 115C (Surge + 130C). In order to achieve the best electrical and mechanical performance it is suggested that they are crimped using dies and tools specifically developed for this purpose by Cembre.HN 5 HN-A25ANE-PPOLYAMIDE PA6.6 INSULATED PIN TERMINALS 33. POLYAMIDE PA6.6 INSULATED COPPER TUBE LUGS for extra flexible copper conductors stranded le c o n7095120150rsmmQuantityBMNLd13,6 13,6 13,6 13,6 15,7 15,7 15,7 15,7 15,7 17,9 17,9 17,9 17,9 17,9 17,9 17,9 20,0 20,0 20,0 20,0 20,0 22,4 22,4 22,4 22,4 22,4 25,0 25,0 25,0 25,015,0 17,0 18,5 21,0 15,0 19,8 19,8 19,0 22,0 23,0 23,0 23,0 19,0 23,0 25,0 27,0 27,0 27,0 27,0 27,0 27,0 30,0 30,0 30,0 30,0 30.0 34,2 34,2 34,2 34,28,0 9,0 11,0 14,0 8,0 9,0 11,0 11,0 14,0 8,0 9,0 11,0 11,0 14,0 15,5 16,5 9,0 11,0 14,0 15,5 16,5 11,0 14,0 15,5 16,5 22,0 16,0 18,0 19,0 22,07,0 8,0 10.0 12,0 7,0 8,0 10,0 10,0 12,0 7,0 8,0 10,0 10,0 12,0 12,0 13,5 8,0 10,0 12,0 12,0 13,5 10,0 12,0 12,0 13,5 20,0 14,0 16,0 17,0 20,054,0 56,0 60,0 65,0 59,5 61,5 65,5 65,5 70,5 63,8 65,8 69,8 69,8 74,8 76,3 78,8 70,6 74,6 79,6 81,1 83,6 81,5 86,5 88,5 90,5 102,5 95,0 99,0 101,0 107,06,4 8,4 10,5 13,2 6,4 8,4 10,5 10,5 13,2 6,4 8,4 10,5 10,5 13,2 15,0 17,0 8,4 10,5 13,2 15,0 17,0 10,5 13,2 15,0 17,0 21,0 13,2 15,0 17,0 21,0Box/Bag200/50 200/50 150/50 150/50 100/25 100/25 100/25 100/25 100/25 100/25 100/25 50/25 100/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 50/25 30/15 30/15 30/15 30/15Mechanical ToolsHydraulic ToolsB 35-50DANE 9-M 6/15 ANE 9-M 8 ANE 9-M 10 ANE 9-M 12 ANE 12-M 6/15 ANE 12-M 8 ANE 12-M 10 ANE 12-M 10/19 ANE 12-M 12 ANE 17-M 6 ANE 17-M 8 ANE 17-M 10 ANE 17-M 10/19 ANE 17-M 12 ANE 17-M 14 ANE 17-M 16 ANE 20-M 8 ANE 20-M 10 ANE 20-M 12 ANE 20-M 14 ANE 20-M 16 ANE 29-M 10 ANE 29-M 12 ANE 29-M 14 ANE 29-M 16 ANE 29-M 20 ANE 35-M 12 ANE 35-M 14 ANE 35-M 16 ANE 35-M 20DimensionsHT 51 RH 50 B 51 B 55 HT 120 and tools and heads with 130 kN crimping force ECW-H3D506 8 10 12 6 8 10 10 12 6 8 10 10 12 14 16 8 10 12 14 16 10 12 14 16 20 12 14 16 20Ref.TNN 70Conductor Size Extra Flexible Stud sqmm mm35uTNN 120exi btoSPECIALc forfidneANE-MThese lugs are particularly recommended for use with extra flexible conductors on for instance, welding machines. ANE-M series lugs are manufactured from electrolytic copper tube annealed and tin plated. The interior of the PA6.6 insulated sleeve is funnel shaped so as to ensure complete and easy introduction of the conductor strands. It also eliminates the need to insulate the terminal using either tape or heat shrinkable tubing. Furthermore the PA6.6 sleeve avoids the possibility of conductor breakage at the barrel entrance. The items tabulated all feature black insulated sleeves, however other colours are available, please consult us. The operating temperature range is 20 to + 115C (Surge + 130C). In order to achieve the best electrical and mechanical performance it is suggested that they are crimped using dies and tools specifically developed for this purpose by Cembre. Details of the appropriate crimping tools and dies are shown on pages 188 to 189.31 34. A-MCOPPER TUBE CRIMPING LUGS for extra flexible copper conductors strande50709512015018532A 9-M 6/15 A 9-M 8 A 9-M 10 A 9-M 12 A 12-M 6/15 A 12-M 8 A 12-M 10 A 12-M 10/19 A 12-M 12 A 17-M 6 A 17-M 8 A 17-M 10 A 17-M 10/19 A 17-M 12 A 17-M 14 A 17-M 16 A 20-M 8 A 20-M 10 A 20-M 12 A 20-M 14 A 20-M 16 A 29-M 8 A 29-M 10 A 29-M 12 A 29-M 14 A 29-M 16 A 29-M 20 A 35-M 10 A 35-M 12 A 35-M 14 A 35-M 16 A 35-M 20 A 40-M 10 A 40-M 12 A 40-M 14 A 40-M 16 A 40-M 20DimensionsmmQuantityiBMNLd9,3 9,3 9,3 9,3 11,0 11,0 11,0 11,0 11,0 13,0 13,0 13,0 13,0 13,0 13,0 13,0 15,0 15,0 15,0 15,0 15,0 16,5 16,5 16,5 16,5 16,5 16,5 19,2 19,2 19,2 19,2 19,2 21,0 21,0 21,0 21,0 21,015,0 17,0 18,5 21,0 15,0 19,3 19,3 19,0 22,0 23,0 23,0 23,0 19,0 23,0 25,0 27,0 27,0 27,0 27,0 27,0 27,0 30,0 30,0 30,0 30,0 30,0 30,0 34,2 34,2 34,2 34,2 34,2 37,5 37,5 37,5 37,5 37,58,0 9,0 11,0 14,0 8,0 9,0 11,0 11,0 14,0 8,0 9,0 11,0 11,0 14,0 15,5 16,5 9,0 11,0 14,0 15,5 16,5 9,0 11,0 14,0 15,5 16,5 22,0 13,0 16,0 18,0 19,0 22,0 13,0 16,0 18,0 19,0 22,07,0 8,0 10,0 12,0 7,0 8,0 10,0 10,0 12,0 7,0 8,0 10,0 10,0 12,0 12,0 13,5 8,0 10,0 12,0 12,0 13,5 8,0 10,0 12,0 12,0 13,5 20,0 11,0 14,0 16,0 17,0 20,0 11,0 14,0 16,0 17,0 20,038,5 40,5 44,5 49,5 40,5 42,5 46,5 46,5 51,5 45,0 47,0 51,0 51,0 56,0 57,5 60,0 50,0 54,0 59,0 60,5 63,0 53,5 57,5 62,5 64,0 66,5 78,5 65,5 71,5 75,5 77,5 83,5 73,0 79,0 83,0 85,0 91,06,4 8,4 10,5 13,2 6,4 8,4 10,5 10,5 13,2 6,4 8,4 10,5 10,5 13,2 15,0 17,0 8,4 10,5 13,2 15,0 17,0 8,4 10,5 13,2 15,0 17,0 21,0 10,5 13,2 15,0 17,0 21,0 10,5 13,2 15,0 17,0 21,0Box/Bag400/100 400/100 400/100 300/50 200/50 200/50 200/50 200/50 200/50 200/50 150/50 150/50 200/50 150/50 150/25 150/25 100/25 100/25 100/25 100/25 100/25 100/25 100/25 100/25 100/25 100/25 75/25 50/25 50/25 50/25 50/25 50/25 30/15 30/15 30/15 30/15 30/15rstocMechanical ToolsHydraulic ToolsHT 51 RH 50 B 51 HT 81-U RHU 81 HT 120 and tools and heads with 130 kN crimping force ECW-H3D RHU 520356 8 10 12 6 8 10 10 12 6 8 10 10 12 14 16 8 10 12 14 16 8 10 12 14 16 20 10 12 14 16 20 10 12 14 16 20Ref.uTN 70 SEConductor Size Extra Flexible Stud sqmm mmd le c o nTN 120 SE B 35-45D B 35-50D HT 45-E B 55 forSPECIALexi bThese lugs are particularly recommended for use with extra flexible conductors on for instance, welding machines. A-M series lugs are designed to suit panel applications. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out. Cembre lugs are annealed to guarantee optimum ductility and electrolytically tin plated to avoid oxidation. The presence of an inspection hole facilitates full insertion of the conductor. Details of the appropriate crimping tools and dies are shown on pages 186 to 187.fidne 35. COPPER TUBE LUGS 4-ESI FIXINGConductor Size sqmmRef.185DimensionsmmQuantityHydraulic ToolsBox/BagLA 37-4ESI19,261201512420/10240A 48-4ESI21,161201512820/10300A 60-4ESI23,761201513320/10400A 80-4ESI27,061201513415/5500A 100-4ESI30,361201513910/5630A 120-4ESI33,461201514410/5800A 160-4ESI38,06120151581000A 200-4ESI44,0802015176A-4ESI series lugs are made from high purity electrolytic copper tube, annealed and tin plated. The four hole stud fixing in accordance with E.A. specificati