Upload
gopal-gandhi
View
87
Download
0
Embed Size (px)
Citation preview
GUIDE HOW ECONOMY'S FLEXIBLE DRUM HEATERS
CAN HELP HEATING DRUM CONTENTS
Flexible Type Drum Heaters Silicon Rubber Drum Heaters
Base Drum Heaters Immersion Drum Heaters
ECONOMY ENGINEERING CORPORATION19 Bank Street, Sonawala Bldg., 2nd Floor , Fort, Bombay- 400 023 INDIA. • Tel: 91-22-2266 2279/116 5
• E-mail : [email protected] / [email protected] • www.economyheaters.com
ACCESSORIES:
Drum SizeChoose Any
Out Side Diameter
Total Wattage
CAT #240 V - AC
Gallon Size
55 22.3(565mm) 770 EECPDH55-770
PRODUCT INFORMATION:
For Metal Drums.For Poly Drums.
Other Drum Heaters: Flexible Type Jackets.
Other sizes. 30 Gallons 15 Gallons 5 Gallons
For Enquiry Please let us know your Drum Size:1 Outside Diameters.2 Height. 3 Metal or poly. 4 Material to heated .5 Temperature to achieved.
Designed to quickly melt heavy solids like molasses, syrups, etc. Available Wattage designed for Metal Drums. 1600 Watts or 3200 Watts. Good for a wide range of applications.
For Poly Drums:Available Wattage designed for Poly drums. 500 Watts/770W -
Drum SizeChoose Any
Out Side Diameter
Total Wattage
CAT #240 V - AC
Gallon Size
5555
22.3(565mm)24.2(651mm)
16003200
EECMDH55-1600EECMDH55-1600
Part Number DESCRIPTION
EECDIC55Drum Insulation Cover for 55 gallonfurther reduce heat loss
Great many chemicals require controlled heating in drums so that the properties are kept intact.
Economy offers flexible Heating Solution for such applications.
FLEXIBLE JACKET TYPE DRUM HEATERS
ECONOMY ENGINEERING CORPORATION19 Bank Street, Sonawala Bldg., 2nd Floor , Fort, Bombay- 400 023 INDIA. • Tel: 91-22-2266 2279/116 5
• E-mail : [email protected] / [email protected] • www.economyheaters.com
ECONOMY ENGINEERING CORPORATION19 Bank Street, Sonawala Bldg., 2nd Floor , Fort, Bombay- 400 023 INDIA. • Tel: 91-22-2266 2279/116 5
• E-mail : [email protected] / [email protected] • www.economyheaters.com
BASE DRUM HEATERS
The Base Drum Heater is made from all mild steel for
extra rigidity on uneven surfaces with tapered edges
for safe ease of drum location and is protected by a
resilient high temperature coating. Temperature
adjustment is afforded by a rear aperture in the control
unit, with neon's indicating power on and load
switching, all viewed through a window in the control
unit top.
Even Heat Over Platen AreaHigh Temperature ToleranceRobust Steel Construction 110v or 230v options20 to 150°C Thermostat 2 metre Armoured Power Cable
The Base Drum Heater is specifically designed for melting or reducing the viscosity of products.The diameter of the base enables use on all sizes of drums up to 55 gallons (200 Litres). Heat is provided by a 2000 Watt Industrial heater providing an even distribution . If a rapid heat up is required and if the contents will accept heat rapidly, or solid mediums are involved , Silicone Side Drum Heaters can be used in conjunction with the base unit or alternatively a Thermal Insulation Jacket.
The Base Drum Heater is controlled by a capillary thermostat, with
a temperature range of 50°C to 300°C, with neon indicators for power and load on.
Power Rating: 2000 Watts, 230 Volts AC 4 Amps or 110 Volts AC 8.5 Amps
Supply Lead: 2 metres Flexible 3-Core Cable
Weight: Approx. 25 kgs.
- Platen: Height 70 mm x Diameter Top 550 mm x Base 600 mm
- Control Unit: Height 105 mm x Protrusion 280 mm
- Overall Unit: Height 105 mm x 880 mm Long x 600 mm Wide
ECONOMY ENGINEERING CORPORATION19 Bank Street, Sonawala Bldg., 2nd Floor , Fort, Bombay- 400 023 INDIA. • Tel: 91-22-2266 2279/116 5
• E-mail : [email protected] / [email protected] • www.economyheaters.com
APPLICATIONS
CONSTRUCTION
TECHNICAL DATA
( Over The Side Heaters )
Drum Immersion Heaters
Designed for direct immersion in a standard 55 Gallon steel drum .These heaters install easily through the 2 in ( 50 mm) Bung hole
These 1000 /1500 watt economy heaters comeduly provided with a thermostat ,manual reset button and pilot light in a general propose terminal enclose .This internaltank temperature sensing feature protects against overheating.
?Stainless Steel sheath, watt densities to 6 2 2W/in (9.3W/cm )
?Wattage upto 2000 watts.?Voltages 234-240 A/c
Light weight , rugged construction . ?Resists damage during installation or removal.
Stainless steel mounting bracket.?Adjust to Varying immersion depth to keep the heating element above settled sludge
?Hairpains repressed ( recompacted) after bending to assure mgO density, Dielectricstrength , heat transfer and life.
Economy Tubular sheathed Element
0Integral , on off manual reset ,Thermostat rated from 30 to 110 C.·Senses process temperature and helps protect against overheating .
Pilot light ·Indicated if heaters is cycled on or off
30 in a (760 mm) long no heat ends,·Leave only the elements heated portion submerged ·From the heater rise
General purpose terminal enclosure ·1 inch (25mm) conduit openings to facilitated wiring
Typical application·Melting heat sensitive material such wax, lard grease and coconuts oil·Water and water based solution heating Freeze protection
ECONOMY ENGINEERING CORPORATION19 Bank Street, Sonawala Bldg., 2nd Floor , Fort, Bombay- 400 023 INDIA. • Tel: 91-22-2266 2279/116 5
• E-mail : [email protected] / [email protected] • www.economyheaters.com
Performance capabilities
Feature and Benefits