EVannex® — Tesla Aftermarket Accessories evannex.com

Disclaimer: Evannex is not responsible for any vehicle damage caused during the installation or use of this product.

Any costs associated with any vehicle damage are the sole responsibility of the purchaser.

Seat HoodieTM for Model S/X/3 Installation Instructions

Thanks for purchasing Seat HoodieTM. Please read these installation instructions BEFORE you install the Seat Hoodie. Seat HoodieTM has been designed as temporary protection for one or both front seats in your Model S or Model X or Model 3. We’ve created an Installation Video that can be viewed at evannex.com. We s trongly recommend that you view i t BEFORE you install Seat Hoodie.

Seat HoodieTM is comprised of five integrated elements: (1) the “hoodie” i s custom-designed to slip over the integrated head rest and upper seat back of the front seats; (2) an embroidered front apron that spans the seat back and the seat cushion with an elasticized “skirt” that fi ts over the seat cushion front edge to anchor the apron and reduce any back sliding; (3) a rear “cape” that contains something that many Model S

and X owners need—a back-of-the-seat storage pocket, (4) two hook and loop straps that fasten the front apron to the rear cape to provide a secure fit, (5) and a bottom connecting strap for a tight fit, a lower buckle strap to ensure a tight fit across the bottom of the seat.

Quick Start Installation Steps:

Step 1 . Remove Seat HoodieTM from its plastic bag

Step 2. Slide the hoodie over the integrated headrest being sure that the embroidered logo faces the front of the vehicle.

Step 3. Pull down the embroidered front apron and fit the elasticized “skirt” over the seat surface and sides.

NOTE: For quick and temporary use, Steps 1 - 3 are all that are required.

Step 4. Moving into the rear seat area, pull down the rear cape and fasten the two Velcro straps to the appropriate fastening area on the bottom of the rear cape.

Step 5. Fasten the lower buckle strap to tighten the front elasticized skirt. Seat HoodieTM is now installed.