Surpass HiT 7060 Login Procedure

Left Click on Hyper TerminalNote: Use HiT7060 Cable (DB9) Connect one end with System Controller and other

with Laptop.

Make New connection, Write Connection Name and Click on OK.

Surpass HiT 7060

Select COM1 and Click on OK

Surpass HiT 7060

Select Restore Default and Click on OK.

Surpass HiT 7060

User Name: root, No need of Password only press Enter.

Surpass HiT

7060

Now you can see All IP address of System.

Surpass

HiT

7060

To set IP, open Local Area Connection.

Surpass

HiT

7060

Right Click on Local Area

Connection and Select Properties.

Select Internet Protocol(TCP/IP)

and Select Properties. In

Internet Protocol Properties

Window Set the IP Address and

Subnet Mask and Select OK.

NOTE: Always Add one digit (1) in Management IP Address and Use as Your Computer IP. e.g. : Management IP: 192.168.0.1 then Computer IP will be 192.168.0.2.

Surpass

HiT

7060

Go to Start → Run Then in run window write CMD and Click on OK.

Surpass

HiT

7060

Ping Computer IP. If Lost is ‘’0’’ its mean it is ok.

Surpass HiT 7060

Use Route Add ,command NOTE: route add (Node IP) (Management IP) and press enter.

Surpass HiT 7060

After Adding the Route add ping Node IP.

Surpass HiT 7060

Open TNMS-M Surpass HiT7060.

Surpass HiT 7060

Give Node IP Address and select OK.

Surpass HiT 7060

Give User Name: root and Password: public and select Connect.

Surpass HiT 7060

Chassis View will be display after some time.

Surpass HiT 7060