View
1
Download
0
Category
Preview:
Citation preview
SoCe
SMARToem : Industrial NetworkingSeamless integration of Reliable Ethernet capabilities in your equipment
General DescriptionSMARToem is a pluggable module designedto enable easy integration of EthernetIndustrial Networks in equipments forElectric, Transportation, and IndustrialAutomation sectors.
This powerful module allows theimplementation of custom routers switchesor end-equipments with powerful networkingcapabilities. Network frame processing canbe performed by hardware using specific IPcores.
SoCe offers solutions implementable onSMARToem for: HSR, PRP, low-latencyEthernet, Profinet and Ethernet IP.
SoCe offers a carrier, SMARTcarrier , thatcan be used by the customers as a referenceto design their own one or to includeSMARToem in their equipments.
Key Features
Scalable Industrial Grade Xilinx FPGA:The Spartan-6 family provides leadingsystem integration capabilities with thelowest total cost for high-volumeapplications. Devices supported: XC6SLX45,XC6SLX75, XC6SLX100 and XC6SLX150.
512 Mb LPDDR: Fast SDRAM memory tostore software applications, protocols stacksor large buffers. Only necessary if an internalsoft-CPU want to be included. None ofSoCe ’s IP requires external RAM memory.
128 Mb Quad SPI Flash: Memory forfirmware and bitstream storage.
EEPROM with unique MAC integrated:Ready to use unique MAC in each module toreduce the time-to-market of the customerproduct.
6x Ethernet Phyters: Each one can beconfigured independently to work in10/100TX (copper) or 100FX (fibre). Thenumber of PHYs can be reduced accordingto the customer necessities.
Size: 88x60mm.
Temperature Sensor: Each module isprovided with an I2C temperature sensormounted on the PCB.
4x Leds indicator: 1 Power up led, 1 FPGAdone led and 2 General purpose LEDs. Also2x LED for each PHY (link status andactivity).
Generic GPIOs: Up to 20 GPIOs ready tobe used in the carrier.
Debug connector: Easy accessibleconnector on the top of the module thataccepts stand-alone powering, JTAG, I2Cand SPI.
High-reliability board-to-boardconnectors: Two board-to-board connectorsattach SMARToem module to the customercarrier.
Pin-out compatible with other modulesavailable on the market.
We provide full access to the schematics,PCB layout and Gerber for SoCe ’s IPcustomers.
System-on-Chip engineering SMARToem Module
SoCe
SMARToem Block Diagram
Board-to-board connector
Tempsensor
LPDDR
FLASH
DebugConn
J1 HSR/PRP Switch IP
PreciseTimeBasic IP
1588Tiny
1588Transparent Clock
User designed XPSor ISE design
Spartan-6FPGA
MIIx6
FE phy FE phy FE phy
ConfigSwitch
S2
J3J2
FE phy FE phy FE phy
ApplicationsSMARToem may be used in a wide range of products and applications. A simple way to introduce redundancycapacities. Thanks to the utilization of Reconfigurable Logic, the module allows full upgradeability and thecombination of different protocols
Energy market products
Power electric protections
Substations interconnection(IEC 61850)
Industrial Networking
Transport
Defence and Aerospace
Education and R&D
About the companySoCe offers specialized design services of FPGAs, SoPCs, IPs and embedded systems. It focuses on FPGA
based Ruggedized Systems, Industrial Networking and Video processing.
Ordering information and contactFor any further question, ordering information or quotation contact SoCe:
soceindustrial@soc-e.comSystem-on-Chip engineering
Zitek Bilbao (ETSI)
Alameda Urquijo s/n
48013 Bilbao SPAIN
Tlf: +34 944420700
System-on-Chip engineering SMARToem Module
Recommended