Sledgehammer SECTION: Tools and Equipment ISSUED: 02-2011REVISED: ##-####

Sledgehammer

SECTION: Tools and EquipmentISSUED: 02-2011 REVISED: ##-####

Objectives• To provide an understanding of the

following– Specifications– Use– Maintenance– Safety

Specifications• Striking tool• Wood or fiberglass

shaft– Length - 36”

• Steel head – 10 or 12 lb head

Use• Forcible entry

– Used with halligan as commercial irons

• Breaking & breaching

Maintenance• Head

– Ensure head is secured to handle

– File any burrs– Apply a thin coat of WD40 to any

non painted metal surfaces– may paint black to prevent

rusting• Handle

– Check for cracks and splinters– Sand and coat with boiled

linseed oil– Wash fiberglass handles with

mild soap and water

Safety• Wear appropriate PPE

– Minimum of helmet, gloves, and eye protection

• Full turnouts and SCBA are required when utilizing tool in an IDLH atmosphere or making entry into a possible IDLH atmosphere

• Check surroundings prior to using tool• Ensure the tool is the right tool for the job