View
2
Download
0
Category
Preview:
Citation preview
Company: Metal recycling plant
Application: Metal recycling
Challenge: Overband magnetic
separators are suspended
above a conveyor line in one
of two alignments,
depending on the offload
requirements (see sketches).
As the material being
conveyed passes beneath
the magnetic plate, ferrous
pieces are pulled up to the
conveyor and away from the
flow. These metal pieces
strike the surface of the
conveyor belt and sharp
edges cut the thin top layer
of standard rubber, PVC or PU
belts. The belt quickly
delaminates and becomes
unusable
Solution: Volta FRG-3 and FRGZ-4
Result: Belt life is typically increased
up to 6 times. VOLTA belts
are highly resistant to
abrasion, cuts , industrial oils
and chemicals and can be
endless welded on site.
Metal separator
2014
Recommended