View
2
Download
0
Category
Preview:
Citation preview
11 LV Capacitor CLMD From 200 to 1000 V
LV Capac i tor CLMD From 200 to 1000 V 11/1
—LV Capacitor CLMDFrom 200 to 1000 V
คุณสมบัติของผลิตภัณฑ
คาแพซิเตอรแบบแหง ไมมีปญหาเรื่องการรั่วคาแพซิเตอรแบบแหง ไมมีสวนประกอบของน้ำมันหรือของเหลวที่สามารถไหลออกมาจากตัวกลองคาแพซิเตอรได จึงปลอดภัย และเปนมิตรกับสิ่งแวดลอม
กำลังสูญเสียต่ำกำลังสูญเสียเนื่องจากฉนวน นอยกวา 0.2 watt/kvar สวนกำลังสูญเสียท้ังหมดรวม discharge resistor นอยกวา 0.5 watt/kvar
อายุการใชงานนานจากกระบวนการรักษาตัวเองเนื ่องจากไดมีการนำแผนฟลมมาเคลือบโลหะ (Metalized Polypropylene Film) มาใชในการผลิต สามารถลดปญหาการพังกอนเวลาอันควรของคาแพซิเตอรไดเปนอยางดี เมื่อเกิดการลัดวงจรในชั้นฟลม ที่ทำหนาที่เปนฉนวน พลังงานความรอนจากการลัดวงจรเล็กๆ น้ี มากพอท่ีจะทำใหช้ันโลหะบางๆ ท่ีเคลือบแผนฟลมอยูเกิดการเผาไม แลวระเหิดกลายเปนกาซ เม่ือช้ันโลหะรอบๆ ท่ีเกิดการลัดวงจรระเหิดไปหมดแลว จึงไมเกิดการลัดวงจรระหวางข้ัวตัวนำของคาแพซิเตอรอีกตอไป กระบวนการน้ีจะเกิดข้ึนและสิ้นสุดอยางรวดเร็ว สงผลใหยังคงใชงานคาแพซิเตอรตอไปอีกได เพราะไมไดเกิดการลัดวงจรอยางถาวร ซึ่งจะเกิดรูโหวขนาดเทาปลายเข็มบนแผนฟลมเทาน้ัน กระบวนการน้ีคือ กระบวนการรักษาตัวเอง หรือ Self healing น่ันเอง การเกิดกระบวนการรักษาตัวเองนี้ จะทำใหคาความจุของคาแพซิเตอรลดลงเพียงเล็กนอยเทานั้น
ปองกันไฟไหมมีการใชสารดับไฟภายในคาแพซิเตอร (Vermiculite) ซึ ่งมีคุณสมบัติไมติดไฟ ชวยปองกันการติดไฟ และชวยดูดซับพลังงานหากเกิดความเสียหายภายในคาแพซิเตอรอยางรุนแรง จึงชวยลดอันตรายจากเปลวไฟและการระเบิดของคาแพซิเตอรเมื ่อเกิดความเสื่อม
การตัดคาแพซิเตอรหนวยยอยอยางเปนระบบคาแพซิเตอรที่ประกอบดวยคาแพซิเตอรหนวยยอยภายในจะมีอายุใชงานมากกวา โดยเมื่อเกิดการเสื่อมบางสวน สวนที่เสื่อมจะถูกตัดออกไปโดยการทำงานของฟวสภายใน ในขณะที่สวนที่ดียังคงทำงานตอได
ติดตั้งงาย น้ำหนักเบาคาแพซิเตอร มีน้ำหนักเบา จึงสามารถยกติดตั้งไดงาย
ผลิตภัณฑเชื่อถือไดตามมาตรฐานคาแพซิเตอร ผลิตและทดสอบตามมาตรฐาน IEC 60831 – 1 & 2
ความปลอดภัยมีการติดตั้งแผนเหล็กระบายความรอนที่คาแพซิเตอรหนวยยอย ทำใหสามารถระบายความรอนไดอยางมีประสิทธิภาพ นอกจากน้ียังมีการติดตั้ง discharge resistor ดวย
ISO 9001 and ISO 14001กระบวนการผลิตและทดสอบไดรับการรับรองตามมาตรฐาน ISO 9001 และ ISO 14001 จึงมั่นใจในคุณภาพของผลิตภัณฑและปลอดภัยตอสิ่งแวดลอม
11 11
11/2 LV Capacitor CLMD From 200 to 1000 V
LV Capac i tor CLMD From 200 to 1000 V 11/3
—LV Capacitor CLMDFrom 200 to 1000 V
Technical Specifications
Price ListCapacitors 3 phase, Dry-type, Internally Fused
kvar at 230V
8 kvar
16 kvar
24 kvar
32 kvar
40 kvar
48 kvar
56 kvar
64 kvar
Type
CLMD 43
CLMD 43
CLMD 53
CLMD 63
CLMD 63
CLMD 63
CLMD 63
CLMD 63
Price (Baht)
8,300
13,900
20,300
26,500
32,300
38,000
44,000
49,500
kvar at 480V
10 kvar
20 kvar
30 kvar
34 kvar
40 kvar
50 kvar
60 kvar
68 kvar
70 kvar
80 kvar
Type
CLMD 43
CLMD 53
CLMD 53
CLMD 53
CLMD 53
CLMD 63
CLMD 63
CLMD 63
CLMD 63
CLMD 63
Price (Baht)
6,700
10,700
14,500
14,800
19,000
22,100
25,700
26,500
29,700
36,500
kvar at 400 V
5 kvar
10 kvar
15 kvar
20 kvar
25 kvar
30 kvar
40 kvar
45 kvar
50 kvar
60 kvar
70 kvar
75 kvar
80 kvar
100 kvar
kvar at 415 V
5.5 kvar
11 kvar
16 kvar
22 kvar
27 kvar
32 kvar
43 kvar
50 kvar
54 kvar
65 kvar
75 kvar
80 kvar
86 kvar
110 kvar
Type
CLMD 43
CLMD 43
CLMD 43
CLMD 43
CLMD 43
CLMD 53
CLMD 53
CLMD 53
CLMD 63
CLMD 63
CLMD 63
CLMD 63
CLMD 63
CLMD 83
Price (Baht)
5,200
5,900
6,500
9,600
10,300
12,000
15,600
17,900
18,200
24,200
29,200
29,700
31,200
39,400
kvar at 500 V
9 kvar
18 kvar
27 kvar
36 kvar
45 kvar
54 kvar
63 kvar
72 kvar
81 kvar
90 kvar
110 kvar
kvar at 525 V
10 kvar
20 kvar
30 kvar
40 kvar
50 kvar
60 kvar
70 kvar
80 kvar
90 kvar
100 kvar
120 kvar
Type
CLMD 43
CLMD 53
CLMD 53
CLMD 53
CLMD 63
CLMD 83
CLMD 83
CLMD 83
CLMD 83
CLMD 83
CLMD 83
Remark:All prices do not include VATPrices are subjected to change without prior noticeEffective from 1 April 2018Please see ABB Capacitors Products catalogue for technical specification and application
Price (Baht)
6,000
9,400
13,300
16,700
22,000
24,300
28,700
29,700
39,600
42,800
53,200
Standard IEC 60831-1&2
Rated voltage 200-1000 V
Connection 3-phase (single-phase on request)
Rated frequency 50 and 60 Hz
Type Self-healing, dry
Dielectric Polypropylene (metalized)
Execution Indoor (outdoor on request)
Overvoltage 1.1 UN at intervals
Overcurrent 1.3 IN
Maximum overload 1.35 times of nominal rating
Maximum inrush current 200 IN
Safety protection Internal fuse within each element
Tolelance on capacitance -5/+10%
Temperature category -25/D according to IEC 60831
Losses Dielectric losses < 0.2 w/kvar
Total < 0.5 w/kvar (discharge resistor included)
Degree of protection IP42 (IP54 on request)
Voltage Test Between terminals 2.15 UN for 10 sec
Between terminals and earth 3 kV for 10 sec
Insulation level 3/15 kV
Discharge device Internal discharge resistors
Discharge time <50 V in 1 minute
Minimum distance between unit 50 mm
Minimum distance between unit and wall 50 mm
Earth terminal M8 is included
Importance notice The installation of capacitors on networks disturbed by harmonic may
require special precautions, especially when there is a risk of resonance
Our offer is valid under normal operating conditions only (according to
IEC 60831) Minimum time to reconnect capacitor to the supply is 40 seconds
Torque for terminal : M6 : 3Nm, M8 : 6Nm, M10 : 10Nm, M12 : 15.5Nm
11 11
11/4 Pow er F actor Contro l l er “R V C” Th e us er- f r ien dly pow er f actor con tro l ler Power Factor Contro l ler “RVC” The user- f r iendly power factor contro l ler 11/5
—Power Factor Controller “RVC”The user-friendly power factor controller
คุณสมบัติของผลิตภัณฑ• ใชงานไดกับแรงดันตั้งแต 100 – 440 Vac• วัดและแสดงผลคาหลักได เชน แรงดัน กระแส ตัวประกอบกำลัง THDV และ THDI• สามารถตัดตอวงจรคาแพซิเตอรไดเต็มรูปแบบ และมีประสิทธิภาพ• สามารถรับกระแส ไดทั้ง 1 A หรือ 5 A• ใชงานงาย• สามารถเซ็ตคาไดอัตโนมัติ• สามารถใชงานในสภาพแวดลอมที่มีอุณหภูมิสูงสุด 60oC• สามารถใชงานในระบบที่มีฮารมอนิก โดยไมไดรับผลกระทบ
• มีระบบปองกันจากแรงดันเกิน และแรงดันต่ำ และฮารมอนิก (THDV)• มีสัญญาณเตือน เมื่อเกิดเหตุการณดังตอไปนี้ • คาเพาเวอรแฟกเตอรไมถึงคาที่ตั้งไวภายใน 6 นาที หลังจาก ที่ไดมีการตอคาแพซิเตอรครบทุกเสต็ปแลว • อุณหภูมิภายในของ RVC สูงเกิน 85oC • แรงดันเกินหรือแรงดันต่ำกวาคาที่ตั้งไว • เพาเวอรซัพพลายไมอยูในพิกัดใชงาน • THDV เกินคาที่ตั้งไว
Indicates a demand for switching on/off a capacitor step
Inductive/capacitive PFMeasurement unitProgrammable parameters:• Target Power Factor (cos )• Phase shift (for special connections)• C/k (starting current)• Switching delay times• Switching sequence• Additional features:
• Switching strategy (linear or circular)
• Regenerative cos (target cos when the load re-inject power on the network)
Easy commissioning with automatic recognition of:• Special connections (single-phase,
CT leads)• Number of outputs• Type of switching sequence
LCD DisplayActive outputs
Alarm indicationOvertemperature indication
Disconnection indication
User programmable parameters/ measurement
Mode indication
Keypad
Automatic / manual / set mode
Automatic setting of:• Phase shift• C/k• Switching delay• Type of switching
sequence
11 11
11/6 Pow er F actor Contro l l er “R V C” Th e us er- f r ien dly pow er f actor con tro l ler Power Factor Contro l ler “RVC” The user- f r iendly power factor contro l ler 11/7
—Power Factor Controller “RVC”The user-friendly power factor controller
Measuring system Micro-processor system for balanced 3-phase networks or single-phase networks
Operating voltage 100 to 400 Vac
Voltage tolerance + 10% on indicated operating voltages
Frequency range 50 or 60 Hz + 5% (automatic adjustments to network frequency)
Current input 1 A or 5 A
Current input impedance < 0.1 Ohm
Consumption 8 VA max
Max.continuous current : 1.5 A
Max peak current 5 A
Max.voltage 440 Vac
Terminal A is rated for a continuous current of 16 A
Normally opened contact
Max.continuous current : 5 A
Rated/max. breaking votage : 250 Vac/440 Vac
Power factor setting From 0.7 inductive to 0.7 capacitive
0.01 to 3 A
Automatic measurement of C/k
RVC3 : programmable up to 3 outputs
RVC6 : programmable up to 6 outputs
RVC8 : programmable up to 8 outputs
RVC10 : programmable up to 10 outputs
RVC12 : programmable up to 12 outputs
Switching time between steps Programmable from 1s to 999s (independent of reactive load)
Switching sequences User defined
The mode of switching for all the programmable switching sequences is integral, direct,
circular or linear
Saving-function All programmed parameters and modes are saved in a non-volatile memory
Power outage release Quick automatic disconnection in less than 20 ms in case of power outage or votage drop
Power outage reset delay time 40s
Operating temperature -10oC to 70oC
Storage temperature -30oC to 85oC
Mounting position Vertical panel mounting
Dimensions 144x144x43 mm (HxWxD)
Cut-out dimensions 138x138 mm (HxW)
Weight 0.4 kg (unpacked)
Connector Spring clamp terminal block
Front plate protection IP43
Relative humidity Maximum 95% ; non-condensing
Other features Overvoltage and undervoltage protection
Auto-adaption to the phase-rotation of the network and the CT-terminals
Not affected by harmonics
Working with generative and regenerative loads
LCD contrast automatically compensated with temperature
Technical Specifications
Type
RVC
RVC
RVC
RVC
Remark:All prices do not include VATPrices are subjected to change without prior noticeEffective from 1 April 2018Please see ABB Capacitors Products catalogue for technical specification and application
Output
6
8
10
12
Price
28,000
30,000
33,300
35,400
Price List
11 11
11/8 Pow er F actor Contro l l er “R V T” Th e s mart PFC f or automat ic capac i tor ban k Power Factor Contro l ler “RVT” The smart PFC for automat ic capac i tor bank 11/9
—Power Factor Controller “RVT”The smart PFC for automatic capacitor bank
คุณสมบัติพิเศษของผลิตภัณฑ
ปรับปรุงเพาเวอรแฟกเตอรทั้งโหลดที่สมดุลและไมสมดุลไดปจจุบันมี โหลด 1 เฟส ตามบานหรืออาคารสำนักงาน (L-L หรือ L-N) และโหลด 3 เฟส ที่สมดุล และ ไมสมดุล RVT สามารถแกเพาเวอรแฟกเตอรทีละเฟส หรือแกเพาเวอรแฟกเตอรพรอมกัน 3 เฟสก็ได และ RVT สามารถทำการวัดคาทีละเฟส และวัดคาพลังงานไดดวย
คุณสมบัติพิเศษของผลิตภัณฑ
RVT สามารถใชไดกับตูคาแพซิเตอรแรงดันปานกลาง และแรงดันสูงโดยการตอผาน PT กอนที่จะตอเขากับ ภาค Input ของสวนการวัดของ RVT และเซ็ตคา V scaling ใหสอดคลองกับ PT ratio RVT ก็สามารถทำหนาที ่เปนตัวควบคุม ไดเหมือนในตูคาแพซิเตอรแรงดันต่ำ (LV)
ทดสอบใชงานเขากับระบบงายสามารถตั้งคาเพื่อทดสอบเขาใจงานกับระบบไดงาย
เมนู เขาใจงาย และมีการแนะนำเปนขั้นตอนมีเมนูหลักและเมนูยอย ที่สามารถอานเขาใจงาย และมีเมนูชวยที่อธิบายใหเขาใจถึงวิธีการเซ็ตคาทีละขั้นตอน
การสื่อสารการติดตอสื่อสาร สามารถเชื่อมตอ RVT โดยใช Ethernet 10/100BASE-T และ USB2.0 RVT ยังรองรับ RS485 ดวยสามารถเซ็ตคา และอานคาไดผานการเชื่อมตอ
สามารถเซ็ตคาไดอัตโนมัติสามารถเซ็ตคา c/k, active outputs, switching sequence และ phase shift ไดอัตโนมัติ
ตั้งคาปองกันไดสามารถต้ังคาปองกันคาแพซิเตอรแบงคใหปลอดภัยจากแรงดันเกิน แรงดันต่ำ อุณหภูมิสูง และฮารมอนิกที่สูงเกินกำหนดได
ขอมูลตางๆ ของระบบไฟฟา และคาแพซิเตอรแบงคRVT สามารถแสดงผลขอมูลของระบบไฟฟาและคาแพซิเตอร เชน แรงดัน, กระแส, ฮารมอนิก และอื่นๆ
มีหลายภาษาสามารถเลือกภาษาใชงานได ดังตอไปนี้ อังกฤษ ฝรั่งเศส เยอรมนีสเปน และจีน
ทนอุณหภูมิแวดลอมไดสูงสามารถใชงาน ในอุณหภูมิแวดลอมไดสูงสุดถึง 70oC
ใชงานที่แรงดัน และความถี่ ไดหลายระดับRVT สามารถใชงานกับระบบ 100 - 460 Vac, 50/60 Hz. สวนการวัดสามารถวัดไดแรงดันไดสูงสุด 690 Vac โดยไมตองใช PT
ทำงานรวมกับ CT secondary 5 A และ 1 Aสามารถรับสัญญาณกระแสจาก CT ไดทั้ง 5 A และ 1 A
Digital inputsรับสัญญาณ Digital input ได 2 ชุด สำหรับแกเพาเวอรแฟกเตอรตอนกลางวัน/กลางคืน และรับสัญญาณเตือนจากภายนอก
สัญญาณรีเลยสงไปภายนอก 2 ชุด และสัญญาควบคุมพัดลม/หรือสัญญาณเตือนสำหรับสงไปภายนอกRVT มีสัญญาณรีเลยสองชุด (NO and NC) และมีสัญญาณสำหรับควบคุมพัดลม หรือสัญญาณเตือนสงไปภายนอก
On-line helpปุมขอความชวยเหลืออยูที่มุมขวาของ touch screen ซึ่งจะมีการแนะนำขั้นตอนการใชงานหรือทดสอบเพื่อใชงานในระบบจริง ทีละขั้นตอน
หนาจอสัมผัส (Touch Screen)ขนาด 3.5 นิ้ว, จอสี QVGA, หนาจอระบบสัมผัส, ใชงานสะดวก
Ethernet connectionใชกับรวมกับ ABB PQ Link Software หรือใช RJ-45 ตอเขากับ RVT และ ระบบ 10/100BASE-T สามารถติดตอสื่อสารกับ RVT ไดจากทุกที่
USB connectionRVT รองรับการเชื่อมตอดวย USB2.0 ทำใหสามารถตอเขากับคอมพิวเตอรเพื่อดูขอมูลตางๆ ผานคอมพิวเตอรได
วัดอุณหภูมิไดสูงสุด 8 จุดRVT สามารถวัดอุณหภูมิในตู ไดสูงสุด 8 จุด โดยสามารถตอ Temperature Probe พวงกันแบบ daisy-chain
Real time clockสามารถบันทึกเวลาตามจริง ของ alarm และ event
Hardware and software lockสามารถปองกันการเปลี่ยนแปลงขอมูลในตัว RVT โดยการล็อกดวย Hardware และ Software
วัดคาไดสามเฟส• Active power (kW) – 3ph/1ph• Apparent power (kVA) – 3ph/1ph• Reactive power (kvar) – 3ph/1ph• Reactive power (kvar) to reach the target cos – 3ph/1ph• Voltage (V) – 3ph/1ph• Current (A) – 3ph/1ph• cos – 3ph/1ph• Total Harmonic Distortion on Voltage/Current : THDV (%), THDI (%)• Voltage/Current Harmonics : H2 up to H49 (% - spectrum)
11 11
11/10 Pow er F actor Contro l l er “R V T” Th e s mart PFC f or automat ic capac i tor ban k Power Factor Contro l ler “RVT” The smart PFC for automat ic capac i tor bank 11/11
—Power Factor Controller “RVT”The smart PFC for automatic capacitor bank
Touch screen
Ease your menu navigationThe touch screen eases capacitor bank setting in an intuitive way and provides a versatile interface to users.
IP54โดยปกติ RVT รุ นมาตรฐาน มีระดับการปองกัน IP43 และมีอุปกรณเสริมปะเก็น (gasket) ชวยเพิ่มระดับการปองกันเปน IP54
Start screenStart screen
A typical setting screenA typical setting screen
Numeric keypadNumeric keypad
Harmonics spectrum displayHarmonics spectrum display
อุปกรณเสริม
RS485 Modbus adapterRVT ทุกรุ น รองรับการสื ่อสารผาน RS485 Modbus RS485 Modbus adapter เปนอุปกรณเสริม (optional) ใชสำหรับดูคาพารามิเตอรตางๆ ของระบบ RVT RS485 interface (3.3V power supply) ไมสามารถใชรวมกับ RS485 adapter (5V power supply) รุนเกาได
Temperature Probe สำหรับวัดอุณหภูมิสามารถใชไดสูงสุด 8 ชุด โดยตอรวมกันแบบ daisy chain หาก Temperature Probe ชุดใด ตรวจพบวาอุณหภูมิสูงเกินกวาคาที่ตั้งไว จะสงสัญญาณให FAN relay ทำงาน และมีการบันทึกคาอุณหภูมิดวย event logging function
11 11
11/12 Pow er F actor Contro l l er “R V T” Th e s mart PFC f or automat ic capac i tor ban k Power Factor Contro l ler “RVT” The smart PFC for automat ic capac i tor bank 11/13
—Power Factor Controller “RVT”The smart PFC for automatic capacitor bank
Technical Specifications
Measuring system
Supply voltage
Consumption
Connection type for measuring circuit
and power supply : Voltage tolerance
Measurement category (according to IEC 61010-1)
Voltage measurement
Accuracy
Frequency range
Current input
Current input impedance
Number of outputs
Output contact rating
Alarm contact rating (voltage free contact)
Alarm contact rating (voltage free contact)
Power factor setting
Switching sequence
Starting current setting (C/k)
Modbus baud rate
CAN connection
USB host connection
USB device connection
Temperature probe input connection
Micro-processor system for balanced three-phase networks/
single-phase networks and unbalanced network
Individual phase power factor control is available
From 100 Vac up to 460 Vac
5 VA max
Phase-phase or phase-neutral for balanced and unbalanced network
+ 10% on indicated supply voltages
CAT III
Up to 690 Vac or higher with voltage transformer
+ 1% full scale
45 or 65 Hz (automatic adjustments to networks frequency)
5 A or 1 A (RMS) (class 1 C.T.)
< 0.1 Ohm
RVT6/RVT12 Base Model: programming up to 6 or 12 output
RVT12-3P 3-phase Model: programming up to 12 outputs
Max. continuous current : 1.5 A (ac) – 0.3 A (110 V dc)
Max. peak current: 5 A
Max. voltage: 440 Vac
Terminal A-A are rated for a continuous current of 18 A (9 A/terminal)
One normally closed contact and one normally open contact
Max. continuous current : 1.5 A (ac)
Rated voltage : 250 Vac (max. breaking voltage: 440 Vac)
Normally opened contact
Max. continuous current : 1.5 A (ac)
Rated voltage : 250 Vac (max. breaking voltage: 440 Vac)
From 0.7 inductive to 0.7 capacitive
0.01 to 5 A
Automatic measurement of C/k
1:1:1:1:1:...:1 - 1:2:2:2:2:...:2 - 1:2:4:4:4:...:4
1:2:4:8:8:...:8 - 1:1:2:2:2:...:2 - 1:1:2:4:4:...:4
1:1:2:4:8:...:8 - 1:2:3:3:3:...:3 - 1:2:3:6:6:...:6
1:1:2:3:3:...:3 - 1:1:2:3:6:...:6
and any other customer programmable sequence
300 – 600 – 1200 – 2400 – 4800 – 9600 – 19200 – 38400 – 57600 bps
Support CAN 2.0B interface (for future use)
For future use
Available
Only 2 contacts using 1-wire protocol
• Parasitic supply mode (no need of external power supply)
• Connection to more nodes in a daisy chain network
• 8 temperature probes connection
• 8 meters maximum between RVT to temperature probe or
between probes
• 64 meters maximum length
Technical Specifications
Step configuration
Display
Adjustable display backlighting
Switching time between steps
Saving-function
Auto adaptation to the connection and
phase-rotation of the network
Auto adaptation to the CT-terminals
Power Factor correction operation is
insensitive to the presence of harmonics.
Operating temperature
Storage temperature
Mounting position
Dimensions
Weight
Connector
Front plate protection
Relative humidity
CE and UL Marked
Price List
Type
RVT-6
RVT-12
MODBUS adaptor kit
Temperature probe for RVT (2 m.)
IP54 gasket
Remark:• All prices do not include VAT
• Prices are subjected to change without prior notice
• Effective from 1 April 2018
• Please see ABB Capacitors Products catalogue for technical specification and application
Output
6
12
accessory
accessory
accessory
Price (Baht)
37,500
45,900
16,300
14,800
2,500
Automatic, fixed, disabled
QVGA 320 x 240 pixels colorful touch-screen
Available
Programmable from 1s to 18h
Working with passive and regenerative loads
(four-quadrant operation).
- 20oC to 70oC
- 30oC to 85oC
Vertical panel mounting
Front plate: 146x146 mm (HxW)
Rear side: 205 x135 mm
Overall: 146x211x67 mm (HxWxD)
650 g (unpacked)
Cage clamp type (2.5 mm2 single core cable)
IP43 (IP54 on request)
Maximum 95%, non-condensing
11 11
U A Co ntactor ออก แบบสํ า ห รั บ ใ ช ตั ด ต อ ค า แพซิ เ ตอร เ ข า กั บ ว ง จ ร ไ ฟฟ า โ ด ย เ ฉพ า ะ
UA Contactor ออก แบบสํ า ห รั บ ใ ช ตั ด ต อ ค า แพซิ เ ตอร เ ข า กั บ ว ง จ ร ไ ฟฟ า โ ด ย เ ฉพ า ะ 11/15
—
คุณสมบัติของผลิตภัณฑ
ทนกระแสชั่วขณะตอวงจรไดสูงเปนคอนแทคเตอรที ่ออกแบบมาเพื ่อใชสำหรับการตัดตอคาแพซิเตอรเขากับวงจรไฟฟา สามารถทนกระแสสูงขั ่วขณะ กำลังตอเขากับวงจรไฟฟาไดสูงสุด 100 เทา ของกระแสพิกัดของคาแพซิเตอร
มีตัวเชื่อมตอที่ยึดภายในเพิ่มความสะดวกและลดเวลาในการตอสายไฟ
ติดตั้งกับราง หรือใชสกรูยึดติดตั้งสะดวกกับราง ตามมาตรฐาน IEC 715, EN 50022 และ EN 50023 หรือใชสกรูยึดที่รูปที่เตรียมไว
ขอมูลทั่วไปขณะตอคาแพซิเตอรเขากับวงจรไฟฟา จะเกิดกระแสสูงชั่วขณะ ซึ่งหากมีการตอคาแพซิเตอรหลายชุด กระแสงสูงชั่วขณะนี้อาจสูงถึง 160 เทาของพิกัดกระแสคาแพซิเตอร ซึ่งจะสูงกวาการตอคาแพซิเตอรแบบชุดเดียวมาก การใชงานทั่วไป คอนแทคเตอร ตองสามารถทนกระแสสูงสุดได หรือตออุปกรณเสริมเพื ่อลดกระแสสูงขณะตอคาแพซิเตอร นอกจากนี ้กระแสใชงานของคาแพซิเตอร อาจจะสูงกวากระแสพิกัด ประมาณ 1.5 เทา โดยคิดจาก 1.15 เทา จากคาความไมแนนอนของคาแพซิเตอร และ 1.3 เทา จากฮอรมอนิก ซึ ่งจากตารางการเลือกขนาดของ UA Contactor ไดนำตัวคูณ 1.5 เทาของกระแสพิกัดของคาแพซิเตอรมาคิดแลว
UA Contactorออกแบบสําหรับใช ตัดต อคาแพซิ เตอร เข ากับวงจรไฟฟา โดยเฉพาะ
11/14
11 11
11/16 U A Contactor ออก แบบสํ า ห รั บ ใ ช ตั ด ต อ ค า แพซิ เ ตอร เ ข า กั บ ว ง จ ร ไ ฟฟ า โ ด ย เ ฉพ า ะ Note 11/17
—UA Contactorออกแบบสําหรับใช ตัดต อคาแพซิ เตอร เข ากับวงจรไฟฟา โดยเฉพาะ
—Note
Technical Specifications
Standard
Number of main pole
Execution
Control voltage
Rated voltage
Rated frequency
Mechanical durability
Max.electrical switching frequency
Electrical durability Ac-6b Ue < 690V
Rated insulation voltage
Peak current
Degree of protection
Approvals
IEC 60947-1/60947-4-1 and EN 60947-1/60947-4-1
3 pole
Indoor
220-230 V (other on request)
690 V
50/60 Hz
10 millions operating cycles
240 cycles/h
For max. peak current 100 IN of the capacitor 100,000 operating cycles
1000 V
See the selection table
Main terminals : IP10 (IP20 for UA 30)
Coil terminals: IP20
UL, CSA
Selection table
Type
UA 30-30-11
UA 50-30-11
UA 63-30-11
UA 75-30-11
UA 95-30-11
UA 110-30-11
Power in kvar (based on 55oC) Max. permissible peak current (kA)
230-240 V
16
20
25
30
35
40
400-415 V
27.5
33
43
50
65
70
440 V
30
36
48
53
65
75
500 - 550 V
34
40
50
62
70
80
690 V
45
55
70
75
80
90
Ue < 500 V
3.5
5.0
6.5
7.5
9.3
10.5
Ue > 500 V
3.1
4.5
5.8
6.75
8.0
9.0
Price List
Type
UA 30-30-11
UA 50-30-11
UA 63-30-11
UA 75-30-11
UA 95-30-11
UA 110-30-11
27.5
33
43
50
65
70
4,300
5,900
7,300
8,800
12,000
14,000
Max. kvar at 400 V Price (Baht)
Remark:• All prices do not include VAT
• Prices are subjected to change without prior notice
• Effective from 1 April 2018
• Please see ABB Capacitors Products catalogue for technical specification and application
11 11
HR C F u se L inks & Fu se Bases Low Vo l tag e
HRC Fuse L inks Low Vo l tage 11/19
—HRC Fuse Links Low Voltage
11/18
Powerful featuresLow loss low voltage high rupturing capacity fuse links type NH are supplied for 500 V.
The main element of the fuse link, the selective fuse elements are directly connected to the knife contacts by spot welding. The ABB HRC fuse link insulators are made of ceramic. Their design matches with the individual load conditions and consequently quarantees faultless and reliable operations.
ABB HRC fuse of standard design are manufactured with Flag indicators on the upper end cap. After operation, the red colored leaf spring tucks up and indicates the status of the operation.
ABB Low Voltage HRC fuses are current limiting.
ABB Low Voltage HRC fuses are available for rated voltages 500V service category gL/gG, and are according to DIN VDE 0636 part 21; IEC 269-1/EN 60269-1; DIN VDE 0636 part 22.
All fuse links according to VDE 0636 for rated voltages 500 V have a minimum breaking capacity of 120 kA.
The geometrical dimensions of the high rupturing capacity fuse links are according to DIN 43620.
For indoor use or outdoor use when enclosed
11 11
HR C F u se L inks Low Vo l t age 11/21
—HRC Fuse Links Low Voltage
11/20
Medium time-current characteristics for ABB Fuse Links
~ 500 V ; operating class gl/gG
Technical Specifications
11 11
Fuse Bases type OFAX 690 V
—Fuse Bases type OFAX 690 V
Type Number of poles
3
3
Terminal Width (mm)
20
25
Fuse size
00
1
IN (A)
160
250
Weight (Kg)
0.44
1.30
Remark
Open with phase
barrier IP00
OFAX 00 P3L
OFAX 1 P3
• Protection to IP00• Ease and speed of installation • fixing on rail to CENELEC EN 50023 • snap-on assembly
• space saving through 2.5 mm2 in-built terminal e.g. for measuring or monitoring• Shock resistant fuse contact, contact spring of stainless steel
OFAX 00 P 3OFAX 00 P 3
Number of polesNumber of poles
Protection, P = open with phase barriersProtection, P = open with phase barriers
Fuse Base, size (00 or 1)Fuse Base, size (00 or 1)
Pr ice L ist 11/23
—Price List
11/22
Fuse size
000
00
1
Rating (A)
50, 63, 80, 100
125, 160
200, 250
Price (Baht)
430
530
720
HRC Fuse Links
Type
XLP 00
XLP 1
OFAX 00 P3L
OFAX 1 P3
Remark:• All prices do not include VAT
• Prices are subjected to change without prior notice
• Effective from 1 April 2018
• Please see ABB Capacitors Products catalogue for technical specification and application
Fuse size
00 & 000
1
00 & 000
1
Price (Baht)
1,940
4,000
2,900
7,100
3-pole Fuse Bases
11 11
F u se Bases type EasyLine X LP Fuse Sw itch Dis con n ector
—Fuse Bases type EasyLine XLPFuse Switch Disconnector
Properties of the EasyLine - XLP:• XLP 00 and XLP 1• Type tested according to EN IEC 60947-3• Fullfills BGV A2• Easy to recycle / EN ISO 14001 standards• Quick-make operation device• Integrated IP20 cable termination• IP30 degree of protection from the front
• Replacement compatible to similar types in the market• Voltage measuring from the front• V-0 plastic materials
3 - pole:• XLP 00 160 A• XLP 1 250 A
Technical data
Type
For NH fuse links acc. to IEC60269-2-1
Rated operational voltage Ue AC
Rated operational voltage Ie AC
Thermal current with fuse link Ith
Utilization category
Rated insulation voltage Ul
Rated impulse withstand voltage Ulmp
Rated conditional short circuit current
Rated frequency
Power loss at lth without fuse link/per phase
Max allowed power loss in the fuse per phase
Electrical durability
Mechanical durability
Degree of protection from the front acc.
to IEC60529
XLP 00 XLP 1
(V)
(A)
(A)
(V)
(kV)
(kArms)
(Hz)
(W)
(W)
Open
Closed
400
125
160
AC23B
1000
8
50
50-60
3.5 W
12 W
200
1400
IP20
IP30
500
160
160
AC22B
1000
8
50
50-60
3.5 W
12 W
200
1400
IP20
IP30
00 1
690
125
160
AC21B
1000
8
50
50-60
3.5 W
12 W
200
1400
IP20
IP30
500
250
250
AC22B
1000
8
50
50-60
7.5 W
23 W
200
1400
IP20
IP30
690
200
250
AC21B
1000
8
50
50-60
7.5 W
23 W
200
1400
IP20
IP30
Detu ning R eator ใ ช กั บ ค า แ พซิ เ ตอร ใ น ร ะ บ บ ไ ฟฟ า ร ะ ดั บ แ ร ง ดั นสู ง สุ ด 690V
Detuning Reator ใ ช กั บ ค า แ พซิ เ ตอร ใ น ร ะ บ บ ไ ฟฟ า ร ะ ดั บ แ ร ง ดั นสู ง สุ ด 690V 11/25
—Detuning Reatorใช กับคาแพซิ เตอร ในระบบไฟฟาระดับแรงดันสูงสุด 690V
11/24
คุณสมบัติของผลิตภัณฑ
ขอมูลเบื้องตนการติดต้ังคาแพซิเตอรในระบบไฟฟาเพ่ือปรับปรุงเพาเวอรแฟกเตอรจะทำใหเกิดวงจรเรโซแนนซแบบขนาน ซึ่งมีความถี่เรโซแนนซที่ตรงกับความถี่ที่มีอยูในระบบไฟฟา จึงเกิดการขยายปริมาณฮารมอนิกใหมีปริมาณสูงขึ้นอยางมากจนทำใหเกิดความเสียหายในระบบไฟฟา จึงไดมีการนำดีจูนฟลเตอรมาใชในการแกปญหา ซึ่งประกอบดวยคาแพซิเตอรตออนุกรมกับรีแอคเตอร จะทำใหเกิดวงจรเรโซแนนซแบบขนานและแบบอนุกรมพรอมกัน โดยวงจรเรโซแนนซแบบขนานที่เกิดขึ้นนี้ จะมีความถี่เรโซแนนซแบบขนานที่ต่ำกวาความถี่ของทุกๆ ฮารมอนิกในระบบไฟฟา จึงไมเกิดปญหาการขยายฮารมอนิกขึ ้น และวงจรเรโซแนนซแบบอนุกรมที่เกิดขึ้นจะชวยกรองฮารมอนิกบางสวนออกจากระบบไฟฟาอีกดวย ซึ่งเอบีบีไดออกแบบรีแอคเตอรใหสามารถใชงานไดปลอดภัยและเชื่อถือได
แกนเหล็กมีความแมนยำสูงมีการนำแผนเหล็กมาเรียงตัวเปนแกนเหล็กอยางแมนยำ ทำใหมีความแมนยำถูกตองทั้งสามเฟส ทำใหไดความถี่ตรงตามการออกแบบ นอกจากนี้แกนเหล็กมีคุณสมบัติความเปนเชิงเสนสูง ทนตอการตอคาแพซิเตอรเขากับวงจรไฟฟาโดยไมอิ่มตัว
พิกัดอุณหภูมิใชงานสูง (Class H)อุณหภูมิใชงานสูงสุด 50oC และอุณหภูมิการเก็บรักษา 75oC
ทำใหชุมดวยเรซิ่นภายใตสภาวะสุญญากาศและแรงดันสูงรีแอคเตอรถูกทำใหชุมดวยเรซ่ินภายใตสภาวะสุญญากาศและแรงดันสูง เพ่ือใหขดลวดและแกนรีแอคเตอรมีความแข็งแรง ขณะใชงานมีเสียงรบกวนต่ำ การสั่นสะเทือนต่ำ และระบายความรอนไดดี
11 11
11/26 Detu ning R eato r ใ ช กั บ ค า แ พซิ เ ตอร ใ น ร ะ บ บ ไ ฟฟ า ร ะ ดั บ แ ร ง ดั นสู ง สุ ด 690 V Note 11/27
—Detuning Reatorใช กับคาแพซิ เตอร ในระบบไฟฟาระดับแรงดันสูงสุด 690 V
—Note
11 11
Technical Specifications
Rated Voltage
Core
Wiring
Terminal
Ground terminal
Impregnation
Protection degree
Tolerance of inductance
Operation
Insulation test
Applicable standard
Operating temperature
Storage temperature
Thermal current
Linearity current
Rated current
Maximum Losses
Inductance
Net Reactive Power
3-phase, up to 690 V
Laminated sheet iron
Aluminium or Copper
Copper-Bar
Fixation holes
Completed unit impregnated under vacuum and overpressure in impregnation
thermosetting resin temperature class H
IP00
+ 3% when measured at 20oC (+ 5oC) at f1 and IN
The reactor is designed to operate continually at a network Voltage equals to UN
with a current load of Ith at Tmax and maintain sufficient safety margin to hot spot
temperatures of its insulation while dissipating losses not exceeding Pmax
Between winning and core of 3 kV at 1 minute according to IEC 76
IEC 60076-6, VDE 0532, IEC 76
Minimum -25oC, maximum 50oC
Minimum -40oC, maximum 75oC
Ith is defined as the root mean square of (I1, I3, I5, I7, I11, I13) where I1 is calculated
from network voltage of 1.1 x UN
I3, I5, I7, I11, I13 are calculated from network
Voltage spectrum of maximum
U3/U1 = 0.5%
U5/U1 = 6.0%
U7/U1 = 5.0%
U11/U1 = 3.5%
U13/U1 = 3.0%
but not exceeding a total THDU of 8%
I Lin = 1.9 IN
IN = normal fundamental current of one phase of the capacitor-reactor combination
in detuned filter
P max
LN = nominal inductance of one phase of reactor
Qnet = Net output reactive power of 3-phase capacitor-reactor combination in
detuned filter at UN
Technical Specifications
Type Price (Baht)
Reactor 7% for Capacitors net output 25 kvar at 400 V
Reactor 7% for Capacitors net output 50 kvar at 400 V
22,000
27,600
Remark: • All prices do not include VAT
• Prices are subjected to change without prior notice
• Effective from 1 April 2018
• Please see ABB Capacitors Products catalogue for technical specification and application
Recommended