F15 Plans Tiled

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 1/25

Specs: F-15 Park J

3D Foamy

Loading

Area

Radio

Weight

4-5 Chanel

Thrust

Copyright © 2004 3DFo

 All rights reserved.

Designed and Drawn by

Steve Shumate & Levi

Updated: 0/19/2004

14-24 oz.

14-18 oz.

289.7 in2

6.5-8.6 oz/ft2WWW.3DFOAMY.COM

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 2/25

et  DFoamy.com.

ed.

 by:

  vi Jordan

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 3/25

Cut a "V" groove

in foam for spars. Pull spar through grooveto make round

Start with the recomendedCG range. You can adjust itfurther back as you become

more familiar with the jet.

CG INFO

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 4/25

All hingintape or acpoints epand contr 

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 5/25

ging for control surfaces can be packingr actual hinges. I prefer robart hinge epoxied in place for the added longivityntrol freeness. CA hinges work well also.

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 6/25

Sand the fuselage corners roundwith 80 grit sand paper,

then finish smooth with 200 and 400

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 7/25

Depron Rails

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 8/25

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 9/25

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 10/25

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 11/25

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 12/25

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 13/25

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 14/25

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 15/25

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 16/25

4

5

6

Prototype Setup/SpecsWing area: 289 sq in (effective area, which incluSpan: 28.4 inLength: 41.7 inWeight RTF: 15.6 oz as shownWing loading: 8.2 oz/ft2 (based on effective wingMotor: GWS EPS-350 with “C” gearingBattery: 11.1V 1200 mAh LipoProp: GWS 8x6 SFCurrent draw: 9.7 ampsPower loading: 101 watts/lbRadio equipment: GWS R-6 receiver, GWS Pico

Flight controls: Wing flaperons, full-flying horizoMaterials used: Either 6mm Depron or BlueCore

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 17/25

cludes the effect of the wing strakes)

ing area)

co and Hitec HS-55 servos, 10 amp ESC

rizontal stabilizer, twin ruddersore fan fold foam

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 18/25

Pull PullPush/Pull

Cut Control horns from 1/32"

ply or a plastic coffee can lid.

Round LE, apply 3M 1" Satin tape for protection

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 19/25

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 20/25

,

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 21/25

1 2 3 4 5 6

1

2

3

  ,Materials used: Either 6mm Depron or BlueCore

Foam Nose Cone(CNC Cut, Sanded to shape)

,

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 22/25

  ,ore fan fold foam

Vac(Sa

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 23/25

Vacuum Formed Canopy(Sand from foam if scratch built)

www.3DFoa

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 24/25

Cut hatch after paintingfor radio access

my.com

Laser cut 1/4" birch motor block.

Epoxy into plane. DO NOT useCA on the moutor mount.

7/25/2019 F15 Plans Tiled

http://slidepdf.com/reader/full/f15-plans-tiled 25/25

H S - 5   6  HB

.

.