View
0
Download
0
Category
Preview:
Citation preview
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
Designed for a wide variety of sound reinforcement applications, the Tannoy Di 5 is a high performance, ultra compact surface mount weather resistant loudspeaker. A full bandwidthloudspeaker designed for commercial, professional and residential applications where environment durability and high quality sonic performance are required. Indoor or outdoor,these speakers are ideally suited to stereo or monaural background or foreground music systems in such applications as diverse as theme parks, retail premises, restaurants and cafés, corporate audio visual, residential developments and houses of worship.
Equipped with Tannoy’s unique and exclusive point source ICT™ 110mm (4.50") drive unit, the Di 5 delivers an acoustic performance of outstanding clarity, definition and detail. The pointsource configuration of the Tannoy ICT™ driver’s mid-bass and tweeter sections ensures awide and controlled dispersion for optimum coverage; this while avoiding the massive loss ofenergy in the vertical plane, at the crossover frequency, inherent in two-way discrete designs.The ICT™ (Inductive Coupling Technology) drive unit also addresses the two most commoncomponent failures experienced in background music and sound reinforcement systems, thetweeter and the crossover reliability. The use of a wireless electromagnetic tweeter means thatno crossover is required in the design; this therefore ensures that an ICT™ unit is exceptionallyreliable and therefore ideal for applications where constant heavy usage is the norm. This aluminium high frequency dome has a deep drawn skirt that sits on the inside of the low frequency voice coil in the same magnetic gap. The skirt is like a single shorted turn that is induced with high frequency information generated by the low frequency voice coil, which is fed a full bandwidth signal. The mineral loaded polypropylene cone material and nitrile rubber surround further enhance durability and long-term reliability.
Available in textured black or white painted finish, the outstandingly durable and scuff resistant,high impact polystyrene (HIPS) Di enclosure is weather resistant,rated IP64 to EN60529(IEC529); a construction fully optimised for consistent performance in adverse conditions indoors or out.
Transformer version - the Di 5tThe Di 5t model option is equipped with an internally mounted low insertion loss line transformer for 70V or 100V distributed sound applications. Wattage taps are easily configurable to the following settings via an easily accessible rotary tapping switch, which is top panel mounted.
70V: 30W / 15W / 7.5W / 3.75W / OFF & Low Impedance operation100V: 30W / 15W / 7.5W / OFF & Low Impedance operation
Product Description
• 110mm (4.50”) ICT™ transducer for high performance and durability
• 90 degree controlled conical dispersion for optimum coverage and forward gain
• Weather resistant rated IP64 to EN60529 (IEC529)• High power handling and extended bandwith• Phase coherent design for superior vocal articulation
and music reproduction• No crossover required, ensuring better phase,
impedance and sensitivity response and increased durability
• Yoke bracket supplied, optional accessories include pole mount adaptor and the unique K-Ball™ pre-wired, fully adjustable multi-angle bracket
• Five year loudspeaker warranty
Transformer version - the Di 5t
• Low insertion loss 30W transformer for an more powerful and dynamic performance in distributed audio installations
• Top mounted switch for line voltage settings
• Indoor or outdoor commercial, professional and residential installations
• High level stereo or monaural background or foreground music and speech paging systems
• Theme parks• Theme bars• Reception / waiting rooms• Airports, convention centres and hotels• Business music systems• Boardrooms and offices• Cruise ships• Retail outlets and shopping malls• Restaurants and cafes • Corporate audio visual• Residential developemnts• Houses of worship
Features
Applications
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:05 Page 1
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
TECHNICAL SPECIFICATIONS
Frequency Response (-3dB) (1) 90Hz - 25kHz
Frequency Range (-10dB) (1) 80Hz - 30kHz
System Sensitivity (1W @1m) (2) 88dB (1W = 2.45V for 6 Ohms)
Dispersion (-6dB) 90 degrees conical
Driver Complement
Low Frequency 1 x 110mm (4.50”)
Mineral loaded polypropylene
High Frequency 25mm (1.00”) ICT™
Crossover 7kHz Inductively coupled
Directivity Factor (Q) 5.3 averaged 1kHz to 10kHz
Directivity Index (DI) 6.6 averaged 1kHz to 10kHz
Rated Maximum SPL (2)
Average 105dB
Peak 111dB
Power Handling
Average 50W
Programme 100W
Peak 200W
Recommended Amplifier Power 100W @ 6 Ohms
Nominal Impedance 6 Ohms
Di 5t - Transformer Taps (top rotary switch)
70V 30W / 15W / 7.5W / 3.75W / OFF
& low impedance operation
100V 30W / 15W / 7.5W / OFF
& low impedance operation
Distortion
10% Full Power (5.5V) 2nd Harmonic 3rd Harmonic
250Hz 2.00% 0.26%
1kHz 0.53% 0.19%
10kHz 2.5% 0.35%
1% Full Power (1.73V) 2nd Harmonic 3rd Harmonic
250Hz 0.65% 0.09%
1kHz 0.144% 0.11%
10kHz 0.52% 0.298%
Enclosure High Impact Polystyrene (HIPS)
rated IP64 to EN60529 (IEC529)
Grille Steel, with weather resistant coating
Finish Textured black or white paint
Connectors Euroblock type removable locking connector with
screw terminals with "loop through" facility
Fittings 1 x K-Ball™ bracket socket
2 x M8 yoke bracket inserts
Supplied Yoke bracket
Accessories
Optional Pole mount adaptor
Accessories K-Ball™ pre-wired multi angle bracket
Dimensions 240.7 x 155 x 162mm (H x W x D)
(9.47 x 6.1 x 6.38”) (H x W x D)
NET Weight 2.7kg (5.94lbs)
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
System Di 5 / Di 5t Construction
8001 4010 Di 5 Black 2 3.0 (6.61lb)
8001 4011 Di 5 White 2 3.0 (6.61lb)
8001 4020 Di 5t Black 2 3.5kg (7.72lbs)
8001 4021 Di 5t White 2 3.5kg (7.72lbs)
PART NUMBER PACKED WEIGHTPACKED
QUANTITY
COLOURMODEL NAME
Ordering Information
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:06 Page 2
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
PERFORMANCE MEASUREMENTS
50
60
70
80
90
100
10 100 1000 10000 100000
y
0
2
4
6
8
10
12
14
10 100 1000 10000
Horizontal Off-Axis Responses
50
60
70
80
90
100
10 100 1000 10000 100000
0 deg10 deg20deg30deg40deg
ANECHOIC
FREQUENCY
RESPONSE
IMPEDANCE
OFF AXIS
RESPONSE
1m on-axis frequency response
frequency (Hz)
SP
L,
1W
/1m
(d
B)
frequency (Hz)
1m on-axis frequency response
frequency (Hz)
Imp
ed
an
ce
(o
hm
s)
Level (d
B)
Horizontal off-axis response
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:06 Page 3
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
PERFORMANCE MEASUREMENTS
0
30
60
90
120
150
180
210
240
270
300
330
360
100 1000 10000
Deg
rees
1
10
100
100 1000 10000
Frequency ( Hz )
Q
BEAMWIDTH
DIRECTIVITY INDEX
Beamwidth vs Frequency
frequency (Hz)
frequency (Hz)
DI vs Frequency
Q
De
gre
es
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:06 Page 4
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
-48
-36
-24
-12
0
0
30
60
90270
300
330
100 Hz
125 Hz
160 Hz
200 Hz
-48
-36
-24
-12
0
0
30
60
90270
300
330
250 Hz
315 Hz
400 Hz
500 Hz
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
630 Hz
800 Hz
1 kHz
1.25 kHz
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
4 kHz
5 kHz
6.3 kHz
8 kHz
10 kHz
12.5 kHz
16 kHz
20 kHz
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
630 Hz
800 Hz
1 kHz
1.25 kHz
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:06 Page 5
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
4kHz
5kHz
6.3kHz
8kHz
10 kHz
12.5 kHz
16 kHz
20 kHz
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
630 Hz
800 Hz
1 kHz
1.25 kHz
100Hz
125Hz
160Hz
200Hz
250Hz
315Hz
400Hz
500Hz
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
1.6kHz
2kHz
2.5kHz
3.15kHz
630Hz
800Hz
1kHz
1.25kHz
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:06 Page 6
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
DIMENSIONAL SKETCHES
Di 5
R165.0mm
(R6.50”)
102.0mm
(4.02”)
R300.0mm
(R11.81”)
155.0mm
(6.10”)
162.0mm
(6.38”)
240.7mm
(9.47”)
130.4mm
(5.13”)
7°
241.0 [9.49"]
123.0 [4.84"]
54.0 [2.13"]
R15.0 [R0.59"]
85.0 [3.35"]
90.0 [3.54"]
6.0 [0.24"]
35.0 [1.38"] ø
Di5 YOKE
241.0mm
(9.49”)R15.0mm
(0.59”)
123.0mm
(4.84”)
54.0mm
(2.13”)
90.0mm
3.54”
85.0mm
3.35”
35.0mm
1.38”
6.0mm
(0.24”)
Ø22.0mm
(Ø0.87”)
Di 5 Yoke
SUPPLIED MOUNTING BRACKET
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:06 Page 7
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
OPTIONAL ACCESSORIES
47.7 [1.88"]
137.9 [5.43"]
93.2 [3.67"]
155.0 [6.10"]
65.0 [2.56"]
155.0mm
(6.10”)
137.9mm
(5.43”)
65.0mm
(2.56”)
K-Ball™ Bracket
93.0mm
(3.67”)
47.7mm
(1.88”)
Pole Mount Adapter
Pole Mount Adapter with K-Ball™ bracket
Pole Mount Adapter with Yoke bracket
240.0[9.45"]
70.0[2.76"]
40.0[1.57"]
Ø22.0 [Ø0.87"]
Ø7.0 [Ø0.28"]
Ø76.2 [Ø3.00"]
Ø152.4 [Ø6.00"] Ø228.6
[Ø9.00"]
8001 4190 K-Ball™ Bracket Black 18001 4191 K-Ball™ Bracket White 18001 4600 Pole Mount Adapter Black 18001 4601 Pole Mount Adapter White 1
PACKED QUANTITYPART NUMBER COLOURMODEL NAME
Ordering Information
240.0mm
(9.45”)
40.0mm
(1.57”)
Ø22.0mm
(Ø0.87”)
Ø152.4mm
(Ø6.00”)
Ø76.2mm
(Ø3.00”)
Ø226.6mm
(Ø9.00”)
Ø7.0mm
(Ø0.28”)Ø70.0mm
(Ø2.76”)
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:06 Page 8
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
The weather resistant, full bandwidth surface mount speaker system shall consist of a 110mm (4.50") full range, point source ICT™ transducer mounted
in an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure, rated IP64 to EN60529 (IEC529). The protective grille shall be
constructed from steel with a weather resistant coating.
Performance of the Di 5t surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 90 degrees
(-6dB). Frequency response measured on axis shall be 80Hz - 30kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at 1 metre in
an anechoic chamber) with no equalisation. Sensitivity shall be 88dB (1W = 2.45V for 6 Ohms). Long term power handling capacity as defined in EIA-426B
test shall be 50W, recommended amplifier power 100W. The nominal system impedance shall be 6 Ohms (in low impedance setting).
The Di 5t speaker system shall be equipped with a 30W high performance line transformer for use in 70.7 or 100 Volt distributed audio systems with
30 / 15 / 7.5 / 3.75* Watt, OFF and Low Impedance taps available. An easily accessible rotary switch located under the rubber trim on the top of the cabinet
shall be available for selecting transformer and low impedance settings.
A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination
with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by
a tie back point.
The dimensions shall not exceed 240.7 x 155 x 162mm (9.47 x 6.10 x 6.38”).
The surface mount speaker system shall be the.....Di 5t.
*70 Volt only
Architectural specifications Di 5t
The weather resistant, full bandwidth surface mount speaker system shall consist of a 110mm (4.50") full range, point source ICT™ transducer mounted
in an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure, rated IP64 to EN60529 (IEC529). The protective grille shall be
constructed from steel with a weather resistant coating.
Performance of the Di 5 surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 90 degrees
(-6dB). Frequency response measured on axis shall be 80Hz - 30kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at 1 metre in
an anechoic chamber) with no equalisation. Sensitivity shall be 88dB (1W = 2.45V for 6 Ohms). Long term power handling capacity as defined in EIA-426B
test shall be 50W, recommended amplifier power 100W. The nominal system impedance shall be 6 Ohms (in low impedance setting).
A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination
with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by
a tie back point.
The dimensions shall not exceed 240.7 x 155 x 162mm (9.47 x 6.10 x 6.38”).
The surface mount speaker system shall be the.....Di 5.
Architectural specifications Di 5
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:06 Page 9
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
NOTES
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:06 Page 10
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
NOTES
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:06 Page 11
Di 5
Tannoy adopts a policy of continuous improvement and product specification is subject to change Di 5 data file // issue 1.07 // 07.03.11
Tannoy (Direct UK) T: 00 44 (0) 1236 420199 E: enquiries@tannoy.comTCGI (ROW sales) T: 00 45 8742 7000 E: info@tcgroup-international.comTCGA (Americas sales) T: 00 1 (519) 745 1158 E: info@tcgroup-americas.comTannoy Middle East T: 00 971 (04) 4401208 E: enquiries@tannoy.com
NOTES
Di5_Di5t Data Sheet.qxp:Layout 1 9/3/11 16:06 Page 12
Recommended