Design.pdf

Design and Development Inputs

DESIGN INPUT Rig Name Bully-2

Rig Type Drill Ship

Water Depth 2860 Ft

Well Type Carbonate

Fluid/Gas Type Produced Gas

Expected/Known Flow Rates 30 – 40 MMscf

Anticipated Sand Production No Sand

Flowing Wellhead Pressure & Temperature 2800psi

Maximum Annulus Pressure 5000psi

Oil Viscosity 0.46 cp

Gas Gravity 0.65-0.85

CGR 5.0 - 35

1. To confirm fluid type & measure fluid

gravity, HC composition and impurities

Job Objectives

2. Evaluate well productivity / production

potential

3. Obtain reservoir data

4. To obtain representative sample

Bottom Hole Pressure & Temperature

H2S / CO2 Content

Formation Type & Name

Reservoir Properties

Total Well Depth

Well Deviation

Casing Size Work string / Tubular Size and Connection

Fluid Type and Weight

Cushion Type and Weight

Type of Packer

Special Requirements

3253 psi & 260°F 100-4000ppm / 20% Post MMU Carbonate N/A N/A 7573ft Vertical 9-5/8” Liner 4-1/2 in. 15.1 Van Top Brine 9.8 ppg (TBC) Permanent Packer Clean shaven due to H2S