Upload
syahmi1337
View
215
Download
2
Embed Size (px)
Citation preview
Design and Development Inputs
DESIGN INPUT Rig Name Bully-2
Rig Type Drill Ship
Water Depth 2860 Ft
Well Type Carbonate
Fluid/Gas Type Produced Gas
Expected/Known Flow Rates 30 – 40 MMscf
Anticipated Sand Production No Sand
Flowing Wellhead Pressure & Temperature 2800psi
Maximum Annulus Pressure 5000psi
Oil Viscosity 0.46 cp
Gas Gravity 0.65-0.85
CGR 5.0 - 35
1. To confirm fluid type & measure fluid
gravity, HC composition and impurities
Job Objectives
2. Evaluate well productivity / production
potential
3. Obtain reservoir data
4. To obtain representative sample
Bottom Hole Pressure & Temperature
H2S / CO2 Content
Formation Type & Name
Reservoir Properties
Total Well Depth
Well Deviation
Casing Size Work string / Tubular Size and Connection
Fluid Type and Weight
Cushion Type and Weight
Type of Packer
Special Requirements
3253 psi & 260°F 100-4000ppm / 20% Post MMU Carbonate N/A N/A 7573ft Vertical 9-5/8” Liner 4-1/2 in. 15.1 Van Top Brine 9.8 ppg (TBC) Permanent Packer Clean shaven due to H2S