View
5
Download
0
Category
Preview:
Citation preview
BONDINGS
COMPOSITES
CEMENTS
RESINS
IMPRESSIONS
EQUIPMENTS
D E N T A LP R O D U C T S
INNOVATION, PERFORMANCE... ... AND MORE BIOCOMPATIBILITY!
JAN 2020
Sources : • Genotoxicity and cytoxicity of 2-hydroxyethyl methacrylate - Elzbieta pawlowska et ol - Mutation Research 696 (2010) 122-129 • Cytoxicity of the dental composite component TEGDMA and selected metabolic by-products in human pulmonary cells - J Emler et ol• TEGDMA and Bisphenol-A : the same level of risk in dental medicine ? - Jean-Marc Meyer - Autredent, No 56, pages 81-86, 2010
INNOVATION, PERFORMANCE & CLINICAL FEATURES
B I O C O M P A T I B I L I T Y Formulation without addition ofBisGMA, TEGDMA, HEMA
By placing biocompatibility at the heart of its innovation strategy, the French laboratory ELSODENT stands out with new dental materials that are always more efficient and safer for patients.
With a 25-years clinical experience, ELSODENT designs and manufactures, in France, improved biocompatibility dental products. More health-friendly for patients, the product range also present unique clinical and physico-chemical qualities to meet the requirements of dentists in terms of saving time and economy.
The origin of BIO+ ELSODENT range
Alarmed by the potential toxicity of dental products commonly used and sold on the market, the French laboratory ELSODENT wanted to address the major concerns of dentists but also those growing health-conscious patients, by developping more health-friendly dental products.
Scientific background of the BIO+ range
These questions about dental products go back decades. During the 90s, amalgams, more commonly known as «fillings», containing mercury, were already challenged by a part of the scientific community.
Replaced today by composites, these new materials are now getting contested because of their significant potential toxicity. With formula based on compounds like TEGDMA, HEMA & BisGMA, these dental products can, under specific conditions, release in the mouth toxic substances for our organism and carcinogenic, like Formaldehyde and Bisphenol A.
FOLLOW US!
Innovation & Performance, and more Biocompatibility!
Dental revolution
Based on its advanced clinical, technical and scientific skills, our laboratory has developed a complete range of composites, resins, adhesives agents, cements,... formulated without addition of these potentially dangerous monomers such as TEGDMA, HEMA, or BisGMA and its derivatives.
Our formulations now offer non-hydrolysable substitution monomers issued from our R&D programs.
Innovative and performant, the BIO + range is ideally suited to the needs of both dentists and patients, since these products benefit from improved biocompatibility while maintaining exceptional clinical and physicochemical properties.
They are easily identified by the BIO+ logo and are presented in recyclable and / or recycled packaging.
Monomers currently used in dentistry and risks*BisGMA (Bis Phenol Glycidyl Metacrylate)
Basic resin for composites and others dental products, synthetized from Bisphenol A (BPA) and Glycidyl Methacrylate.Also contains free BPA, quickly released by the products in the mouth, and found in saliva a few hours after use. When hydrolyzed, the product releases Bisphenol A.
TEGDMA (Triethyleneglycoldimethacrylate)
Resin used to make BisGMA more flowable. Beyond its intrinsic toxicity, its lipophilic nature allows it to easily penetrate cell membranes and interact with DNA. Easily hydrolysed by salivary enzymes to produce Formaldehyde.
HEMA (Hydroxy Ethyl Metacrylate)
A short-chain of resin, which easily crosses cell walls and can,like TEGDMA, interact with DNA. Interfering in DNA repair, this can lead to mutations and cancers. Easily hydrolysed by salivary enzymes to produce Formaldehyde.
*Sources : Mol Biol Rep (2012) 39:1561–1574 | Dental Materials Journal 19 (2) 139-152, 2000 | Mutation Research 696 (2010) 122–129 | Dental Materials 24 ( 2008) 1670–1675
Innovative and performant dental products, made in France and formulated without the addition of potentially toxic resins such as HEMA, BisGMA, TEGDMA.
This is the core of ELSODENT BIO+ approach when designing dental consumables with improved biocompatibility to offer more health-friendly products.
Vizualized by dentists, designed by ELSODENT
ISO 13485
CONTENT
RESTORATION 5CORE BUILD-UP 13IMPRESSION 18CROWNS 23CEMENT 27IMPLANTOLOGY 32ENDODONTICS 34ACCESSORIES 36EQUIPMENT 39
Dental medical devices for dental professionnals only, not refunded by the Health Insurance. Carefully read the intructions on the product packaging andnotices before use. Our products are manufactured by G-Pharma certified by Tüv Rheinland according to the ISO 13485 standard.
5
RESTORATION
SEALANTPF SEAL Pits and fissures sealant
COMPOSITEPUREFILL 2Nano-hybrid, antero-posterior compositePUREFILL FLOWFlowable nano-hybrid compositeCIRUS +Nano-hybrid, antero-posterior compositeCIRUS FLOWFlowable nano-hybrid composite
OPAQUEROPAQOpaquer
BONDING HEALBOND MPUniversal self-etching light-cure bonding agentHEALBOND MAXTwo-components universal light-cure adhesive systemHEALBONDLight-cure bonding agent
ETCHINGG-ETCHEtching gel 38% phosphoric acid
6 www.elsodent.com
PF SEAL
PUREFILL FLOW
REFERENCES & DESCRIPTION
PUR-F-4-* 2 x 1,2 ml (2g) syringes + 10 tips.VITA shades:A1/B1 - A2 - A3 - A3,5 - B2
IR-100 100 pink needle tips. Gauge 18.*Shade MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1
ADVANTAGESHigh flexural strength. Elongation at break > 5 mm
Very fluid. Reach the bottom of the thinnest fissures
Conversion rate > 60%
Hydrophobic High durability. No risk of detachment
Easy and fast use: etching, application then polymerization
Very resistant, less abrasion
Opaque white shade. Better contrast for a perfect surveillance application and a good survey.
INDICATIONSPits and fissures sealing
REFERENCES & DESCRIPTION
PFS-3,6 2 x 1,2 ml syringes + 10 tips. Opaque white shade
ETL 100 blue needle tips. Gauge 25MD : Class IIa certified by Tüv Rheinland (0197)
Pits and fissures sealantFormulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESVery resistant. Flexural strength > 100MPa
Conversion rate > 60%
Highly filled (65% weight)
Thixotropic. Remains in place without flowing
Time saving. No metallic matrix needed
Stable. Does not polymerize under the chair light
INDICATIONSRestoration of small classes III and classes V
Cavity liner in the ‘’Bond and Flow’’ technique
Fix splints after orthodontic treatments or in case of mobile teeth
Flowable nano-hybrid compositeFormulation without addition of HEMA, TEGDMA, BisGMA
1. Lingual clinical view of 31 and 41 treated
2. Etching of the coronary cavities 31 and 41
3. Setting up of a light-cure bonding
4. Application of Purefill Flow in the coronary cavities 31 and 41
5. Light-curing of Purefill Flow with the brace
6. Brace in place, flooded in the polymerized composite
CLINICAL PROCEDURE | Fixing brace
7www.elsodent.com
PUREFILL 2
PUREFILL2 Filtek Tetric Clearfil G-Aenial ElsodEnt Supreme Evoceram Majesty GC 3M ViVadEnt Kuraray
PUREFILL 2 Filtek Tetric Clearfil G-Aenial Grandio Z100 Supreme Evoceram Majesty GC Voco 3M 3M ViVadEnt Kuraray
20s 30mn 24h 48h
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CAC
CESS
ORI
ESCO
RE B
UIL
D-U
P M
ATER
IAL
TEM
PORA
RY
BRID
GES
& C
ROW
NS
CIM
ENTS
&
CAVI
TY L
INER
EQU
IPM
ENT
REST
ORA
TIO
NAC
CESS
ORI
ES
INDICATIONSPosterior restorations (class I, class II, MOD)
Anterior restorations (class III and class IV)
Class V cavities
Aesthetic corrections (diastema, hypoplasia, discoloration)
Nano-hybrid, antero-posterior compositeFormulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESLow shrinkage ~ 2 %Polymerization depth > 3mmHigh conversion rate ~ 70%Highly filled (80% weight)
Does not stick to instruments
Perfect consistency for easier use, anterior and posterior
Stable, does not polymerize under the chair light
Aesthetic. Excellent polishability
This is the first Elsodent composite developed from an innovative formulation without any addition of BisGMA, TEGDMA, HEMA, to get a low toxicity composite. Its higher biocompatibility, due to the non-hydrolysable monomers contained in the matrix of the product, leads to lower toxicity over time. It makes PureFill2 an essential product in our declaredapproach to public health.
REFERENCES & PRESENTATIONSPUR2-3-* 3g syringe. VITA shades
A1/B1 – A2 – A3 – A3,5 – B2 - C2 - Incisal - Bleach
PUR2-5* 20 x 0,25g compules. VITA shades A1/B1 - A2 - A3 - A3,5 - B2 - C2 - Incisal - Bleach
* Shade MD : Class IIa certified by Tüv Rheinland (0197)
COMPARATIVE PHYSICO-CHEMICAL TEST
* Tests conducted by G-Pharma. Volumetric shrinkage according ISO 17304. Flexural strength according to ISO 4049 - Zwick equipement. Conversion rate evaluated using a FTIR spectrometer with ATR mode. Polymerization by Elsodent curing light diam: 9mm - 600mW/cm² power at room temperature (20°C).
Conversion rate (%)*Flexural Strength (MPa)*
8 www.elsodent.com
CIRUS+
INDICATIONSAnterior restorations (class III and class IV)
Posterior restorations (class I, II and MOD)
Class V cavities
Aesthetic correction (diastema, hypoplasia, discoloration)
Composite veneers (direct method
Nano-hybrid, antero-posterior composite
ADVANTAGESEconomic syringe 4,5gDoes not stick to instruments
Outstanding flexural strenght = 130 MPa
Polymerization depth > 3mmReduced polymerization stress
Low shrinkage
Highly filled (75% weight)
Easy condensable in posterior use
Easy handling in anterior use
REFERENCE & PRESENTATIONCIRN-4,5* Syringe 4,5g. VITA shades
A1/B1 - A2 - A3 - A3,5 - B2 - C2 - Incisal - Bleach * Shade MD : Class IIa certified by Tüv Rheinland (0197).
CLINICAL PROCEDURE
1- Defective amalgam of 46
2- Minimum removal and cut, preserving the reaction dentin
3- Finished and polished composite
REFERENCES & PRESENTATIONSCIRN-K KIT INTRO 5 x 4,5g CIRUS+ (A1/B1- A2 - A3
- A3.5 - B2) + 1 x 1,2ml CIRUS FLOW (A3) + 1 x 1,2ml OPAQ + 2 x 1,2ml etching gel G-ETCH + 5ml bonding HEALBOND MP + 50 disposable applicators ELSOBRUSH.
MD : Class IIa certified by Tüv Rheinland (0197).
• 5 syringes 4,5g CIRUS+ mixed shades A1 - A2 - A3 - A3,5 - B2
• 1 syringe CIRUS FLOW A3 (1,2ml)• 1 syringe OPAQ (1,2ml)• 2 syringes etching gel G-ETCH (2 x 1,2ml)• 1 bottle light-cure bonding HEALBOND MP (5ml)• 50 disposable applicators ELSOBRUSH
ALL-IN-ONE | KIT INTRO
9www.elsodent.com
CIRUS FLOW
OPAQ
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CAC
CESS
ORI
ESCO
RE B
UIL
D-U
P M
ATER
IAL
TEM
PORA
RY
BRID
GES
& C
ROW
NS
CIM
ENTS
&
CAVI
TY L
INER
EQU
IPM
ENT
REST
ORA
TIO
NAC
CESS
ORI
ES
INDICATIONSRestoration of small classes III and classes V.
Its perfect thixotropy and its high flexural strength, make Cirus Flow the ideal flowable composite to fix fiber glass splints (mobile teeth, after orthodontic treatments)
Cavity liner in the “Bond & Flow” technique
Flowable nano-hybrid composite
ADVANTAGESThixotropic, does not flow and remains in place
Time saving. No need for a metallic matrix
Very resistant. Flexural strength > 100 MPa
Highly filled (65% weight)
Ideal in conjunction with CIRUS+, for the ‘’Blond & Flow’’
REFERENCES & PRESENTATIONSCIRF-3,6-* 2 x 1,2ml (minimum 2g) syringes available in
VITA shades : A2, A3, A3,5, B2 + 5 tips
CIRF-7,2-* 4 x 1,2ml (minimum 2g) syringes (A2, A3, A3,5, B2) + 20 tips
CIRF-7,2 4 x 1,2ml (minimum 2g) of the same shade + 20 tips. VITA shades : A2 - A3 - A3,5 - B2
IR-100 100 pink needle tips G20* Shade MD : Class IIa certified by Tüv Rheinland (0197)
INDICATIONSTo hide exposed metal surfaces after fracture of the ceramic layer on bridges and crowns.
To cover the reactive dentin in deep class III, to avoid layers of composite
Light-cure opaquerFormulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESHigh hiding power
Versatile in use
REFERENCES & PRESENTATIONSOPA-2 1 x 1,2ml syringe + 10 applicator tips. A3 shade
LTL 100 black needle tips. Gauge 20MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
10 www.elsodent.com
HEALBOND MPElsodEnt
HEALBOND MP
REFERENCES & PRESENTATIONSBMP-5 Adhesive - 5ml bottle
BMPA-5 Activator for dual-curing use - 5ml bottleMD : Class IIa certified by Tüv Rheinland (0197)
ALL-IN-ONE!
Shear bond strength* (MPa)
COMPARATIVE PHYSICO-CHEMICAL TEST
Activator for dual-mode
MULTI-PURPOSE INDICATIONS
HEALBOND MPCASE
ADHESIVE ACTIVATOR
PUREFILL 2(see p. 7)
Light-cure direct restoration Class I to V antero-posterior restorations
CORE D(see p. 14)
Self/Light-cure direct restoration (core build-up)
Core build-up Root-canal post sealing
INNOCEM(see p. 30)
Self/Light-cure indirect restoration
Indirect restorations Inlays, ceramic or composite veneers, Maryland bridges
ADVANTAGESMULTI-PURPOSE Direct & Indirect restorations
UNIVERSAL Powerfull shear bond strength on all support : tooth structures, ceramic, metal and zirconia
High shear bond strength: 13,9 MPaDesensitizing and eliminates residual bacteria
IMPORTANT NOTICE !ELSODENT formulation of INNOCEM allows HEALBOND MP to become DUAL without using an activator!
Universal self-etching light-cure adhesive system Formulation without addition of HEMA, TEGDMA, BisGMA
11www.elsodent.com
HEALBOND MAXElsodEnt
OptibondXTRKErr
HEALBOND MAX
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CAC
CESS
ORI
ESCO
RE B
UIL
D-U
P M
ATER
IAL
TEM
PORA
RY
BRID
GES
& C
ROW
NS
CIM
ENTS
&
CAVI
TY L
INER
EQU
IPM
ENT
REST
ORA
TIO
NAC
CESS
ORI
ES
Adhesives Shear Bond Strenght*
INDICATIONSDIRECT RESTORATION Light-cure, self-cure, dual-cure composites
*In conjunction with INNOCEMINDIRECT RESTORATION Inlays and Onlays ceramic, metal (precious or non-precious), Zirconia, composite.Veneers
ADVANTAGESMULTI-PURPOSE Direct & Indirect* restorations
UNIVERSAL Strong adhesion on all surfaces: dental structures, ceramic, metal and zirconia
Compatible with all resin-cements, composites and core build-up materials, light, self or dual-cure
EFFICIENT Exceptionnal bonding strength when used on dentin and enamel
DURABLE Hydrophobic once polymerized, for a long-lasting action, with no water absorption. Excellent quality of the seal over time.
REFERENCES & PRESENTATIONSBMX-10 HEALBOND MAX Self-etching, Universal
bonding system (2 x 5ml bottles, primer + adhesive)
MD : Class IIa certified by Tüv Rheinland (0197)
NEW
Unique bonding solution, whatever the clinical case and the technique used
CLINICAL PROCEDURE
On the surface of enamel and dentin previously prepared, cleaned and dried and making sure to use a different disposable applicator for each component:
Apply Healbond Max Primer for 20 s. Air dry for 5 s.
Apply Healbond Max Adhesive for 15 sec. Air dry for 5 s.
Light-cure 10 s, then apply the com-posite according to the manufacturer’s instructions.
Dentin with Etching
Dentin Self-Etching
Ceramic mordançée
Metal Zirconia
COMPARATIVE PHYSICO-CHEMICAL TEST
Two-components universal self-etching light-cure adhesive system Formulation without addition of HEMA, TEGDMA, BisGMA
12 www.elsodent.com
Jumbo Kit
G-ETCH
HEALBOND
Syringe 1,2ml
REFERENCES & PRESENTATIONSJKB-50 JUMBO KIT 1 x 50ml storage syringe + 5 x 3ml
empty syringes + 40 tips |B (blue) - V (green)JKV-50
JRB-50 1x 50ml storage syringe (blue)
JRV-50 1x 50ml storage syringe (green)
MET-6 MINI KIT 4 x 1,5g syringes + 10 needle tips (blue)
LTL 100 black needle tips
ETL 100 blue needle tipsDispositif médical de classe IIa certifié par Tüv Rheinland (0197)
Etching gel - Acide phosphorique à 38%
AVANTAGESHigh thixotropy, doesn’t flow
Oustanding water solubility
Excellent contrast. Blue or Green
Washes off quickly and easily
Non-drying, medium viscosity gel. 3-years Lifetime
INDICATIONSLight-cure composites on tooth structures
To desensitise cervical regions and free dentin areas
Dual-cure mode (core build-up), when mixed with Healbond activator
Light-cure bonding agentFormulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESShear bond strength ~ 13,9 MPa
Desensitizing and eliminates residual bacteria
Good wetting properties to be used on slightly moist dentin surfaces (wet-bonding technique)
REFERENCES & PRESENTATIONSB-5 HEALBOND - 5ml bottle
BA-5 HEALBOND Activator for dual-curing - 5ml bottleMD : Class IIa certified by Tüv Rheinland (0197)
Activator for dual-cure mode
13
CORE BUILD-UP MATERIALCORE D Dual-cure core build-up material
CORE D FLOWDual-cure core build-up fluid material
CORE D SCSelf-cure core build-up material
CORE D LCLight-cure core build-up material
ANCRAGE RADICULAIREFPRoot canal fiber posts
CORE BUILD-UP
14 www.elsodent.com
CORE D
CORE D FLOW
REFERENCES & PRESENTATIONS
CDB-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - white shade
CDD-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - dentin shade
EJ-100 100 yellow mixing tips
IJ-100 100 yellow intra-oral tips
IV-50 50 green intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
REFERENCES & PRESENTATIONS
CDF-5 2 x 2,5ml syringes + 10 mixing tips + 10 intra-oral tips - dentine
EMP-100 100 brown mixing tip
IMP-100 100 intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
Very thixotropicNo matrix needed !
INDICATIONSCore build-up on non-vital teeth
Sealing root canal posts associated with a dual-curing bonding type HEALBOND MP
Dual-cure core build-up material Formulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESVery thixotropic. Does not flow. No matrix needed. Improves operating field vision
Hardness equivalent to dentin. No different feeling while burring
Radio-opaqueHigh flexural strength > 140 MPaHigh compressive strength ~ 330 MPaHigh conversion rate
INDICATIONSCore build-up on non-vital teeth
Sealing root canal posts associated with a dual-curing bonding type HEALBOND MP
Dual-cure core build-up fluid material Formulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESFlowable, with thin tips, to allow injection in small and narrow cavities.
Hardness equivalent to dentin. No different feeling while burring
High conversion rate = 68% (1h)
High flexural strength = 136 MPaHigh compressive strength ~ 330 MPa
15www.elsodent.com
CORE D LC
CORE D SC
CORE D LCElsodEnt
Clearfill Photocore Kuraray
CORE D LCElsodEnt
Clearfill Photocore Kuraray
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CAC
CESS
ORI
ESCO
RE B
UIL
D-U
P M
ATE
RIA
LTE
MPO
RARY
BR
IDG
ES &
CRO
WN
SCI
MEN
TS &
CA
VITY
LIN
EREQ
UIP
MEN
TRE
STO
RATI
ON
ACCE
SSO
RIES
NEW
INDICATIONSCore build-up on non-vital teeth
Sealing root canal posts associated with a dual-curing bonding type HEALBOND MP
Self-cure core build-up material Formulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESThixotropic. Does not flow. No need for a matrix. Improves operating field vision
Fast setting time = 55s
Self-curing for a minimal shrinkage of the material
High flexural strength = 140 MPaHigh compressive strength ~ 330 MPa
Radio-opaque
INDICATIONSCore build-up on non-vital teeth
Light-cure core build-up material Formulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESEasy set up, even in small and narrow cavities
Thixotropic. Set-up without matrix. Time saving and optimized operating field vision
Highly charged (70% weight)
Amazing polymerization depth ~ 6 mm after 40s
High flexural strength ~ 136 MPaHigh compressive strength ~ 360 MPa
REFERENCES & PRESENTATIONSCDLCB-6 2x 3ml syringe + 10 needle tips (white)
CDLCD-6 2x 3ml syringe + 10 needle tips (dentin)
IR-100 100 pink needle tips. Gauge 18.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
REFERENCES & PRESENTATIONS
CDSCB-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - white
CDSCD-25 25ml cartridge + 20 mixing tips + 20 intra-oral tips - dentin
CDSCB-50 50ml cartridge + 20 mixing tips + 20 intra-oral tips - white
CDSCD-50 50ml cartridge + 20 mixing tips + 20 intra-oral tips - dentin
EJ-100 100 yellow mixing tips
IJ-100 100 yellow intra-oral tips
IV-50 50 green intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
16 www.elsodent.com
FP
6. Gently insert the posts into the root canal. Polymerization starts immediately
7. Apply CORE D SC around the posts and onto the inner surfaces of the preparation
8. Restoration completed, Preparation of the abutment tooth can start
9. Preparation comple-ted. Abutment tooth ready for impression
REFERENCES & PRESENTATIONSKFP–15 KIT INTRO 3 x 5 posts (1,00mm – 1,20mm - 1,35mm),
under individual blister + 3 assorted drills
FP–5-* Refill of 5 posts of the same size, individual blister
FP-3-* Refill of 3 drills of the same size* Size MD : Class IIa certified by Tüv Rheinland (0197)
Core build-up restoration on an upper PM, in conjunction with a FP fiber post
CLINICAL PROCEDURE
1. Endodontic treatment completed, root canals sealed
2. Preparation of the root canal with a suitable reamers, accordingly with the anatomy of the root
3. Preparation completed 4. Choice of the suitable posts - Try-in-application of a conditioner on the posts and cavity (if necessary).
5. Application of HEALBOND MP on the post, canal wall and cavity. Application of CORE D SC on th post.
INDICATIONSTo re-inforce the non-vital tooth structure
Root canal fiber posts
ADVANTAGESIndividual blister: no cross-contamination and easy selection
Translucent. Aesthetic and good light conduction
Rough surface. Exceptional cohesion with the composite and/or the cement
Radio-opaque (210% Al equivalent)
Elasticity modulus close to that of the tooth. Homoge-neous repartition of the mechanical stress
Elasticity modulus = 60 GPa Flexural strenght = 1500 MPaColour code on top of the post
Biocompatible : no toxicity
No corrosion or tooth structure discoloration
Compatible with all resin-based cements
Sterilization : 135°C, 2.1 Bar, 5 mn. No change in flexural strength
Cylindrical posts with a conical end for the last 2 mm
17www.elsodent.com
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CAC
CESS
ORI
ESCO
RE B
UIL
D-U
P M
ATE
RIA
LTE
MPO
RARY
BR
IDG
ES &
CRO
WN
SCI
MEN
TS &
CA
VITY
LIN
EREQ
UIP
MEN
TRE
STO
RATI
ON
ACCE
SSO
RIES
9. Adhesive application in the root canal and in the pulp chamber
8. Universal adhesive HEALBOND MP
6. Fiberglass handling with hemostats
5. Glass fiber post FP
4. Drying of the root canal with a point of paper
3. Rinse thoroughly
20. Final result
2. Etching
19. Easy removal of cement excess
18. Crown set up
17. Cement application in the intrados
15. Significant collar dyschromia
13. Fiberglass coated with Core D
12. Core D composite injection into the root canal and pulp chamber
11. Adhesive light-curing
10. Adhesive application on the fiber post
1. Set up of the operating field
Devitalized tooth reconstruction by plastic-inserted material (RMIPP) using FP glass fiber, Core-D composite and HealBond MP adhesive, then assembling monolithic crown using opaque cement INNOCEM Dr Christian MOUSSALLY (Paris)
CLINICAL CASE
14. Tooth prepared after gum laser fitting
IMPRESSION
ALGINATEALGIPLUS & ALGIPERFClass A type I dental alginate
SILICONE BY ADDITIONHARMONYVinyl polyxilane impression material
BITE REGISTRATIONSTILL BITEBite registration siliconeDUROCResin-based bite registration material,implant transfer caps splinting
RETRACTIONELSOCORDKnitted retraction cordHEMOSALAstringent gel - 25% aluminum sulfate
19www.elsodent.com
ALGIPLUS & ALGIPERF
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CAC
CESS
ORI
ESCO
RE B
UIL
D-U
P M
ATER
IAL
TEM
PORA
RY
BRID
GES
& C
ROW
NS
CIM
ENTS
&
CAVI
TY L
INER
EQU
IPM
ENT
REST
ORA
TIO
NAC
CESS
ORI
ES
ALGINATEALGIPLUS & ALGIPERFClass A type I dental alginate
SILICONE BY ADDITIONHARMONYVinyl polyxilane impression material
BITE REGISTRATIONSTILL BITEBite registration siliconeDUROCResin-based bite registration material,implant transfer caps splinting
RETRACTIONELSOCORDKnitted retraction cordHEMOSALAstringent gel - 25% aluminum sulfate
REFERENCES & PRESENTATIONSAP-500 ALGIPLUS 450g bag, dark purple
AA-500 ALGIPERF 500g bag, dark green Dispositif médical de classe I
PHYSICAL PROPERTIES & CHARACTERISTICSALGIPLUS ALGIPERF
Precision 50μ 20μ
Working time 1min 45s 1min 45s
Setting time (in mouth) ~ 30s ~ 30s
Compatibility Suitable with all plasters Suitable with all plasters
Dimensional stability
The impression can be kept for 4 days in an sealed plastic bag 4 days 7 days
NOTE Working and setting times are closely related to water temperature.
Class A type I dental alginate
ADVANTAGESExcellent elasticity: no tear off wand very good recovery after deformations
Thixotropic. Remains in the tray without leaking and gives perfect covering of teeth during printing
Dark colour for a good contrast to allow an easy and fast reading of the impressionte
Anti-microbial action. No decontamination step needed before sending to the laboratory
Mint flavour
20 www.elsodent.com
HARMONY
STILL BITE
REFERENCES & PRESENTATIONSHPN-600 Putty soft, regular setting 2 x 300ml (base + catalyst)
HPF-600 Putty soft, fast setting 2 x 300ml (base and catalyst)l
HM-100 Medium viscosity, regular setting - 2 x 50ml cartridges + 10 mixing tips
HLN-100 Low viscosity, regular setting - 2 x 50ml cartridges + 10 mixing tips
HLF-100 Low viscosity, fast setting - 2 x 50ml cartridges + 10 mixing tips
HM-200 Medium viscosity, regular setting - 4 x 50ml cartridges
HLN-200 Low viscosity, regular setting - 4 x 50ml cartridges
HLF-200 Low viscosity, fast setting - 4 x 50ml cartridges
EJ-100 100 yellow mixing tips
IJ-100 100 Intra-oral tipsMD : Class I
VISCOSITY & SETTING TIMELow viscosity, regular setting 2-steps impression (Wash Technique)
Low viscosity, fast setting 2-steps impression (Wash Technique)
Medium viscosity, regular setting. For ‘’one step’’ impression procedure
Putty Soft, regular setting
Putty Soft, fast setting
Vinyl polyxilane impression materials
ADVANTAGESSpecially developed to provide a very precise and highly hydrocompatible impression material
Matte appearance for a perfect and fast reading. Correction possible right away, if needed
High compressive strength
Good dimentional stability < 0.2%
Excellent coverage after distorsion > 99%
REFERENCES & PRESENTATIONSSB-100 2 x 50ml cartridges + 10 mixing tips
SB-200 4 x 50ml cartridges
EV-100 100 green mixing tipsMD : Class I
Bite registration silicone
ADVANTAGESFast set (45s) High shore hardness (95 shore A)
High precision 15μ
ThixotropicEasy to trim. Good dimensional stability
Can be scanned with a laser/ optical/ touch system
Indiscernible viscosity for the patient.
INDICATIONSBite registration, in dentistry and orthodontics.
Occlusion keys.
Gnatological evaluations.
Intermaxillary bite registration: centric, protrusion or lateral.
Diagnostic assessments of cranio-mandibular disorders needing afterward an interpretation with a CAO system
Thixotropic. Doesn’t don’t start to flow until the Putty is in place. Improves patient comfort. Accurate and “easy to take” impression.
21www.elsodent.com
DUROC
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CAC
CESS
ORI
ESCO
RE B
UIL
D-U
P M
ATER
IAL
TEM
PORA
RY
BRID
GES
& C
ROW
NS
CIM
ENTS
&
CAVI
TY L
INER
EQU
IPM
ENT
REST
ORA
TIO
NAC
CESS
ORI
ES
REFERENCES & PRESENTATIONSDU-50 50ml cartridge + 10 mixing tips
EJ-100 100 yellow mixing tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
Resin-based bite registration material, implant transfer caps splintingFormulation whithout addition of HEMA, TEGDMA, BisGMA
ADVANTAGESThixotropic : does not flow between teeth
Fast setting time ~ 40 s
Blue for a strong contrast
Easy to trim excess
The most rigid bite registration materials available
High flexural strength
Negligible linear shrinkage
Burn with no residue
INDICATIONSIMPLANTOLOGY Fixing together implant transfer caps before final impression
Bite registrationTo quickly and perfectly fix the two parts of a bridge infrastructure
To elaborate inlays cores in direct method
1. Apply material after a slight air-blow
2. Bite registration 3. Bite registration segment after polymerization
CLINICAL PROCEDURE
CLINICAL PROCEDURE
DUROC, implant transfer caps splinting
1 Implant transfers in place before impression.
2 Setting of Duroc is finished, giving free access to screws
3 Fitting 4 Impression made with the implant transfers
5 Replicas are in place (not screwed yet)
CLINICAL PROCEDURE
STILLBITE bite registration DUROC bite registration
1. & 2. Bite registration
22 www.elsodent.com
HEMOSAL
ELSOCORD
REFERENCES & PRESENTATIONSHSA-6 4 x 1,5g / 1,2g syringes + 10 black needle tips
LTL 100 intra-oral black tipsMD : Class IIa certified by Tüv Rheinland (0197).
REFERENCES & PRESENTATIONSC-000 size 000
Bottle with 260cm of cordC-00 size 00
C-0 size 0
C-1 size 1MD : Class I
Astringent gel - 25% aluminum sulfate
ADVANTAGESThixotropic gel. Easy, precise and fast setting
No necrosis or blackening of tissue
Helps reducing gum inflammation
Versatile in use
No contra-indications
Raspberry taste
INDICATIONSRESTORATIVE DENTISTRY Conditioning of the injured gum during the preparation of juxta-gingival class V cavities, to avoid discoloration of the definitive composite restoration
PROSTHETIC PREPARATION Allow a non-traumatic and optimal gum retraction. Apply the gel in the sulcus and insert the retraction cord
ENDODONTIC PROCEDURES When a canal is bleeding
Knitted retraction cord
ADVANTAGES100% cotton cord is knitted into interlocking chains: to facilitate easy packing of cord into sulcus.
Knitted loops absorb and transport significantly greater quantities of hemostatic solution or gel providing more effective hemostasis
Knitted chains provide an excellent medium for gel absorption and placement
Color code for quick and easy size identification
INDICATIONSTaille 000 Very narrow and shallow sulcus
Taille 00 Narrow and shallow sulcus. Impression technique with double cords. The 00 is placed first at the bottom of the sulcus
Taille 0 Narrow sulcus or thin gum. Impression of mandibular incisors
Taille 1 Thick gum or deep sulcus. impressions of other dental sectors
CROWNS & BRIDGES
TEMPORARY MATERIALPHOENIX MDTemporary crown & bridge resinPHOENIXTemporary crown & bridge resin
RELININGTOPBASEThermoplastic for denture relining
24 www.elsodent.com
24
PHOENIX MD
PHOENIX
PHOENIX ExperTemp Structur3 Protemp4 ELSODENT ultradEnt Voco 3M
MPa
REFERENCES & PRESENTATIONSPHMD-50-A1 50ml cartridge + 10 mixing tips - shade A1
PHMD-50-A2 50ml cartridge + 10 mixing tips - shade A2
PHMD-50-A3 50ml cartridge + 10 mixing tips - shade A3
EJ-100 100 yellow mixing tips.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
Resin for temporary bridges and crownsFormulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESThixotropic. does not flow and can be injected directly into the mouth around the abutment tooth
High flexural strength and slight resilience
Very thin oxygen inhibition layer
A new layer can be applied on top of an existing one up to 2 or 3 days after max.
Setting time = 2min 45s
INDICATIONSINDIRECT METHOD Temporary crowns and long temporary bridges, with a pre-impression
INDIRECT METHOD Temporary crowns directly in mouth. A temporary crown can be made in mouth within 3 min max.
* Tests carried out with a Zwick equipment, according to ISO 11405
REFERENCES & PRESENTATIONSPH-50-A1 50ml cartridge + 10 mixing tips - shade A1
PH-50-A2 50ml cartridge + 10 mixing tips - shade A2
PH-50-A3 50ml cartridge + 10 mixing tips - shade A3
EB-100 100 blue mixing tips.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
Resin for temporary bridges and crownsFormulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESHigh flexural strength > 100 MPaExtremely reduced inhibition oxygen layer: the surface of the cured material is almost dry
Easy and fast to use
Aesthetic
INDICATIONSTemporary crowns
Small temporary bridges, with a pre-impression (indirect method)
Flexural strength*
25www.elsodent.com
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CAC
CESS
ORI
ESCO
RE B
UIL
D-U
P M
ATER
IAL
TEM
PORA
RY
BRID
GES
& C
ROW
NS
CIM
ENTS
&
CAVI
TY L
INER
EQU
IPM
ENT
REST
ORA
TIO
NAC
CESS
ORI
ES
REFERENCES & PRESENTATIONSPHMD-50-A1 50ml cartridge + 10 mixing tips - shade A1
PHMD-50-A2 50ml cartridge + 10 mixing tips - shade A2
PHMD-50-A3 50ml cartridge + 10 mixing tips - shade A3
EJ-100 100 yellow mixing tips.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
• Inject PHOENIX MD in the pre-impression. Check that the nose of the mixing tip is always in contact with the bottom of the pre-impression, to avoid bubbles in the material.
• For incisives, use an intra-oral tip to be able to reach the bottom part of the impression.
• Also use an intra-oral tip to inject resin in the sulcus of the tooth, prior to putting back in the mouth the pre-impression loaded with resin, to get a perfect temporary crown.
• Important notice: do not forget to withdraw the loaded impression from the mouth, after 1 minute
maximum: the resin will be still in a plastic phase (soft) and it will not be blocked by the adjacent teeth. The material will recover after deformation.
• Wait for the resin to set completely in the impression, out of the mouth.
• Take the impression out of the mouth and eliminate the oxygen inhibition layer with a disinfection wipe or with a tissue impregnated with alcohol. This layer is always present in the 2 components resin products. Trim the excess with a diamond bur without water spray.
1. Dents taillées, prêtes pour l’élaboration des provisoires
2. Injection de Phoenix MD dans la pré-empreinte
3. Bridge provisoire dans l’empreinte, non ébarbé
4. Bridge provisoire hors de l’empreinte, non ébarbé
5. Bridge provisoire terminé et poli
1. 35 and 36 prepared.Impression completed.
2. Injection of PHOENIX MD starting by the sulcus.
3. Look of the temporary crowns after bite registration and polymerization
4. Sculpture direclty in the mouth with a diamond bury
5. Temporary crowns finished and polished
• Keep the prepared abutment tooth slightly humid. Put a yellow ring mixing tip and an intra-oral tip on the cartridge and inject PHOENIX MD directly onto the teeth, starting in the sulcus.
• Once, the tooth is completely covered, ask the patient to bite on the uncured resin.
• After about 40 seconds, the resin reaches an elastic phase. Ask the patient to open wide and take the untrimmed temporary crown off the tooth and put it
back a few times, to avoid any blocking with adjacent teeth.
• Trim the excess in the mouth, using a diamond bur, under water spray.
• Trim the proximal walls outside of the mouth.• Polish the crown. Seal it with a temporary luting
cement
CLINICAL PROCEDURE
NOTE This type of resin is very hard and the use of a laboratory bur for resin is not recommended..
DIRECT METHOD
INDIRECT METHOD
26 www.elsodent.com
TOPBASE
REFERENCES & PRESENTATIONS
TPU TOPBASE Kit of 2 maxillary plates
TPD TOPBASE Kit of 2 mandibular plates
TPCLU TOPBASE Clinical kit of 10 maxillary plates
TPCLD TOPBASE Clinical kit of 10 mandibular plates
TPK TOPBASE Set 1 maxillary plate + 1 mandibular plates
DM class IIa
Thermoplastic plate to reline denturesBIOCOMPATIBLE, BisGMA, TEGDMA, HEMA-FREE
ADVANTAGESVery easy and fast use
No mixing of products
A perfect relining in 10 to 15 minutes only
With a good air dryer, or a heat air gun
Sticks directly and strongly to any type of resins used for dentures
Very economicalAesthetic
Accurate recording of details of the mucosa
Can be re-shaped anytime by re-heating it as many time as needed
Biocompatible, no addition of BisGMA, TEGDMA, HEMA. No toxicity
INDICATIONSSemi-definitive, hard relining of dentures
Demo video
CLINICAL PROCEDURE
1. Clean the intrados of the prosthesis, Make the surface slightly rough, with sandpaper, a bur then rinse with alcohol and dry thoroughly.
2. Center the plate on the intrados of the prosthesis [cf 2a - 2b]3. Heat the plate from the centre to the sides to distribute the
heat evenly. [cf 3]4. Once the plate has softened uniformly, it’s translucent and
adheres directly to the intrados of the prosthesis. [cf 4a - 4b]5. Push the soften plate into the intrados (wet gloves) [cf 5]6. 7. Start immedialtely to remove material in excess, on the
edges of the prosthesis with your fingers wets. [cf 6-7].8. Immerse in hot water (70°C) [cf 8], before putting it in mouth,
to avoid any risk for the plate to sick to the mucosa, in case of hyposalia.
9. Once in mouth, ask the patient to bite firmly for 2 minutes, in order to accurately register all the details of the surface of the mucosa. [cf 9]. Remove from the mouth then eliminate excesses and polish with rubber cup or disc.
TEMPORARY FILLING
PROREZDual-cure composite for temporary fillingELSOTEMPFluoridated temporary filling cement
TEMPORARY CEMENTSEAL TEMP, SEAL TEMP S Temporary resin-based cements
PERMANENT ADHESIVEINNOCEMSelf-adhesive universal permanent resin cement
CAVITY LINERHEALDENT Self-cure linerHI-SEALLight-cure cavity liner
CEMENTS
28 www.elsodent.com
PROREZ
ELSOTEMP
REFERENCES & PRESENTATIONSTPS-B Temporary filling cement 3 x 28g white
TPS-R Temporary filling cement 3 x 28g pink
TPP-B Temporary filling cement 6 x 28g white
TPP-G Temporary filling cement 6 x 28g grey
TPP-R Temporary filling cement 6 x 28g pinkMD : Class IIa certified by Tüv Rheinland (0197).
CONSISTENCYGrey soft
White standard
Pink hard
Eugenol-free, fluoridated temporary filling cement
ADVANTAGESBecause of its unique plasticizer, no expansion will occur during the setting process
No pulp or gum irritations (PH=7)
Fast-setting
Waterproof
Does not dry in the jar, even when opened
Eugenol-free: does not hinder polymerization of resins and composites
Contains fluoride: cariostatic action
Soft before setting to allow a perfect application during the filling process and hard after setting.
Stick to the walls of the tooth: remains in mouth 1 or 2 months, if needed.
Easy to remove
Dual-cure composite for temporary fillingFormulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESFast setting : 45 sec (self-curing mode)
Easy to place, even in small or narrow cavities, with the dual syringe and its intra-oral tip
ThixotropicWaterproofEasy to remove with a probe or a curette
Aesthetic A3 shade
Fluoride release
INDICATIONS Temporary filling for inlay and onlay preparations
Temporary filling for implant screw holes
Temporary filling for other cavities to be protected (after endodontic treatments...)
REFERENCES & PRESENTATIONSPRZ-16 2 x 5ml dual syringes + 20 mixing tips + 20 intra-
oral tips
EMP-100 100 brown mixing tip
IMP-100 100 intra-oral tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
29www.elsodent.com
SEAL TEMP & SEAL TEMP S
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CAC
CESS
ORI
ESCO
RE B
UIL
D-U
P M
ATER
IAL
TEM
PORA
RY
BRID
GES
& C
ROW
NS
CIM
ENTS
&
CAVI
TY L
INER
EQU
IPM
ENT
REST
ORA
TIO
NAC
CESS
ORI
ES
REFERENCES & PRESENTATIONSTPS-B Temporary filling cement 3 x 28g white
TPS-R Temporary filling cement 3 x 28g pink
TPP-B Temporary filling cement 6 x 28g white
TPP-G Temporary filling cement 6 x 28g grey
TPP-R Temporary filling cement 6 x 28g pinkMD : Class IIa certified by Tüv Rheinland (0197).
Temporary resin-based cementsFormulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESPerio-friendlyThanks to the smooth cement texture, the gum completely heals within 2 to 3 days
Any procedure (impression, etc) can be performed withtout haemostatic problems
Suitable use on vital teeth
Time saving The cement sticks to the intrados of the temporary crowns: The prepared teeth always remain clean
Before putting the temporary crown back on the tooth:
SEAL TEMP : just apply a new layer of cement. If a supra-occlusion occurs, just trim the external surface of the temporary crown.SEAL TEMP S : remove the old layer of cement with tweezers, prior to applying a new one
2 complementary cements for all clinical cases
REFERENCES & PRESENTATION
ST-25 SEAL TEMP 2x 12,5g syringes (base + catalyst)
STD-16 SEAL TEMP 2x 5ml dual syringes + 20 mixing tips
STD-8 SEAL TEMP 1x 5ml dual syringe + 10 mixing tips
STS-25 SEAL TEMP S 2x12,5g syringes (base + catalyst).)
STDS-16 SEAL TEMP S 2x 5ml dual syringes + 20 mixing tips
STDS-8 SEAL TEMP S 1x 5ml dual syringes + 10 mixing tips
EM-100 100 brown mixing tips.MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
INDICATIONSSEAL TEMP - Strong retention strengthTemporary bridges and crowns on low abutment teeth.
Long-term temporary crowns (2-3 months).
Definitive cementation of crowns on implant, except prosthetics elements in Zirconia
SEAL TEMP S - Classic retention strengthTemporary bridges and crowns on normal abutment teeth and implants
Temporary cementation of definitive veneers to valid aesthetic
1. Temporary bridge (try-in)
2. Injection of the cement in the temporary bridge
3. Luting of the temporary bridge
4. Temporary bridge sealed. Excess cement eliminated. Occlusion checked
CLINICAL PROCEDURE
30 www.elsodent.com
INNOCEM Breeze Relix Panavia Cement SmartCem2 G-Cem MaxCem PEntron Unicem Kuraray Resin SE dEntsPly Gc Elite 3M cybErtEch KErr
20 s 6 mn 30 mn
INNOCEM Relyx Panavia Breeze Cement MaxCem G-Cem Unicem Kuraray PEntron Resin SE Elite Gc 3M cybErtEch KErr
INNOCEM Relyx Panavia SmartCem MaxCem Breeze G-Cem Unicem Kuraray 2 Elite PEntron Cement 3M dEntsPly KErr GC
Dentine Métal Zircone Céramique
INNOCEM
REFERENCES & PRESENTATIONSIC-10 -TA2 5ml syringe + 10 mixing tips + 10 regular intra-
oral tips. Translucent A2 shade
IC-10-OA2 5ml syringe + 10 mixing tips + 10 regular intraoral tips. Opaque A2 shade
IC-10-OA3 5ml syringe + 10 mixing tips + 10 regular intraoral tips. Opaque A3 shade
MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1
Conversion rate*
Flexural strength*
Shear bond strength*
* Tests conducted by G-Pharma. Flexural Strength according to ISO 4049 and carried out with a Zwick equipment. Conversion rate using FTIR spectrometer (ATR). Shear bond strength according to ISO 11405 and carried out with a Zwick equipment
TESTS RESULTS & COMPARISON
Excellent adhesion to Etched ceramic: 23,9 MPa Dentin: 14,10 MPaZirconia: 19,3 MPa Metal: 23,81 MPa
INDICATIONSMetal, composite, etched (or silanisated ceramic) inlays, onlays, crowns and bridges
In conjunction with HEALBOND MP Maryland bridges of 2 to 3 elements Etched (or silanisated) ceramic veneers. Root canal posts (metallic or fiber posts)
Self-adhesive universal permanent resin cementFormulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESStrong adhesion to dentin, metal, Zirconia, composite and etched (or silanated) ceramic
Unsurpassed conversion rate = 58,40% (30 min.)
Résistance à la flexion excellente = 90 MPa
Fast and easy to use - No pre-treatment required in most cases After 5 seconds of polymerisation, the excesses remain slightly rubbery to be easily removed
Strong hiding power (opaque versions). Perfect for cementation of aesthetic prosthetics elements on implant abutments, or on metallic elements such as inlay core and amalgams
Slight hydrophilia before polymerization for collagen fibers and phosphate ions complexation (vital teeth) and hydrophobia for a long-term and stable adhesion
IMPORTANT NOTICE !INNOCEM formula allows HEALBOND MP to become DUAL without addition of an activator.
20. Final result19. Easy removal of cement excess
18. Crown set up17. Cement application in the intrados
15. Significant collar dyschromia
CLINICAL CASE Assembly of the monolithic crown using opaque cement InnoCem Dr C. MOUSSALLY (Paris)
31www.elsodent.com
HEALDENT
HI-SEAL
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CAC
CESS
ORI
ESCO
RE B
UIL
D-U
P M
ATER
IAL
TEM
PORA
RY
BRID
GES
& C
ROW
NS
CIM
ENTS
&
CAVI
TY L
INER
EQU
IPM
ENT
REST
ORA
TIO
NAC
CESS
ORI
ES
REFERENCES & PRESENTATIONSD-10 10ml bottle
MD : Class IIa certified by Tüv Rheinland (0197)
REFERENCES & PRESENTATIONSHS-6 4 x 1.2 ml (minimum 2g) syringes + 10 needle tips.
IR-100 100 pink needle tips. G18MD : Class IIa certified by Tüv Rheinland (0197)
INDICATIONSLINER No risk of post-operative sensitivities. Compatible with all bonding agents and restorative materials. Enhanced adhesion of bonding agents by 1 to 2 Mpa.
DESENSITIZER Immediate pain relief on cervical recessions or root exposures.
Before prosthetic sealing on the tooth to avoid sensitivity due to the acidity of cements during the first 24h.
After tooth bleaching & whitening.
After scaling, root planning & perio treatments
Desensitization self-cure linerFormulation without addition of TEGDMA, BisGMA
ADVANTAGESEasy to use. Apply and wait 10 secondes before drying with air
Use pure product undiluted. No dental preparation, mixing or photo-cure needed
Immediate desensitive efficiency. Long lasting effect.
Anti-microbial action (surface)
Light-cure cavity linerFormulation without addition of TEGDMA, BisGMA
ADVANTAGESCompatible with all dental restorative materials or resin cements.
Releases favorable calcium ions, fuoride ions and phosphate ions. These are known to be beneficial to the tooth structure, to stimulate secondary dentin formation and to have cariostatic properties
Very hard after setting and virtually insoluble in water and oral fluids
Can be applied directly from the syringe through pre-bent dispenser tips for precised placement or can be dispensed on a pad or mixing well and placed on the tooth with a suitable instrument
Dentin shade
Radiopaque
ACTION MECHANISMThe resin links to proteins of the dentin and seals the tubulis to isolate the surface of the cavity. the antimicrobial agent kills germs at the surface and fasten the efficiency of the product..
Sodium fluoride reduces the incidence of root surface caries, remineralizing the dentin, to help providing a long-lasting desensitization
NOTE HI-SEAL chemically bonds to adhesive primers, composites and other resin based materials and it micromechanically bonds to dentin
IMPLANTOLOGY
SURGICAL GUIDEDUROC CLEARTranslucent resin for surgical guide
33www.elsodent.com
DUROC CLEAR
IMPR
ESSI
ON
END
OD
ON
TIC
ACCE
SSO
RIES
CORE
BU
ILD
-UP
MAT
ERIA
LTE
MPO
RARY
BR
IDG
ES &
CRO
WN
SCI
MEN
TS &
CA
VITY
LIN
EREQ
UIP
MEN
TRE
STO
RATI
ON
ACCE
SSO
RIES
IMPL
AN
TOLO
GY
SURGICAL GUIDEDUROC CLEARTranslucent resin for surgical guide
REFERENCES & PRESENTATIONSDUCL-50 50ml cartridge + 10 mixing tips
EJ-100 100 yellow mixing tipsMD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
INDICATIONSSurgical guides directly in mouth
Stabilization of SICAT plates (Sirona)
Bite registration when unstable
Translucent resin for surgical guideFormulation without addition of TEGDMA, BisGMA, BisGMA
ADVANTAGESResistant but slightly resilient, for an easy removal
A new layer can be applied on top of an existing one and stick to it
Translucent for a better vision of the surgical field
Adequate setting time
Low exothermicity
1. DUROC CLEAR application
2. Insertion of the reference body into the resin
3. Reference body in place 4. System taking off
5. Detection of the reference body
6. Removing the reference body
7. Machining of the drill body
8. Drill body machined
9. Apply the dual self-etching bonding HEALBOND MP around the drill body and inside the surgical guide
10. -Assembling of the 2 parts of the surgical guide
11. Trimming and polishing the surgical guide
12. Surgical guide finished
MAKING OF A SURGICAL GUIDE DIRECTLY IN MOUTH IN A CADCAM ENVIRONMENT
ENDODONTIC
IRRIGATIONENDONEEDLECanulas for root canal irrigation
LIQUID DAMNOTRE DAMMulti-purpose, light-cure liquid dam
35www.elsodent.com
ENDONEEDLE
NOTRE DAM
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CCO
RE B
UIL
D-U
P M
ATER
IAL
TEM
PORA
RY
BRID
GES
& C
ROW
NS
CIM
ENTS
&
CAVI
TY L
INER
EQU
IPM
ENT
REST
ORA
TIO
NAC
CESS
ORI
ES
IRRIGATIONENDONEEDLECanulas for root canal irrigation
LIQUID DAMNOTRE DAMMulti-purpose, light-cure liquid dam
Multipurpose light-cure liquid damFormulation without addition of HEMA, TEGDMA, BisGMA
ADVANTAGESLow exothermic reaction to avoid harmful reaction of the mucosa
Excellent thixotropy for an easy setting
Versatile multi-purpose
Blue for a good contrast
REFERENCES & PRESENTATIONSND- 4 2 x 1,2ml syringes + 10 tips
LTL 100 black needle tips. Gauge 20MD : Class IIa certified by Tüv Rheinland (0197), excl. tips, Class 1.
To ensure a waterproof joint between the tooth and the rubber dam
Gum protection during bleaching sessions at the chair
To built temporarytooth walls
REFERENCES & PRESENTATIONSED30-100 100 canulas G30 - purple
ED27-100 100 canulas G27 - yellow
ED23-100 100 canulas G23 - blue
ED30-30 30 canulas G30 - purple
ED27-30 30 canulas G27 - yellow
ED23-30 30 canulas Gauge 23 - blue
S3-100 100 sterile syringe 3ml Luer Lock
S5-100 100 sterile syringe 5ml Luer LockMD : Class I
INDICATIONSCleaning root canals without risking a perforation of the apex
ADVANTAGESLateral opening and blunt end
Compared to needles with apical opening, a needle with lateral opening and blunt end will prevent any risk of damage at the apex of the tooth (acute desmondontitis), especially with a chronically infected tooth (eg.: widely opened apex) or when the apessification is not complete
The small diameter of the opening allows enough water pressure to expel the debris from the canal
Canulas for root canal irrigation Lateral opening and blunt end
INDICATIONSRestorative dentistry To hold Teflon® film in place when luting aesthetic venners, or making a class II composite involving the contact point
Prosthodontic To fill up undercuts before impression, to avoid tearing off the material
Endodontic To insure a waterproof joint of the rubber dam around a tooth during an endodontic session.To build temporary tooth walls during endodontic sessions, to hold the irrigating liquid in place
Bleaching Protection of soft tissues during bleaching process
ACCESSORIES
GUNS & TIPSGUNSFor dual cartridges 1:1 and compulsTIPSMixing tips & intra-oral tips
APPLICATORSELSOBRUSHDisposable dental applicators
LIGHTINGPROLUXMulti-purpose, intra-oral, lighting system
37www.elsodent.com
EM-100 EMP-100EB-100 EMO-50EJ-100ER-100EV-100
IT-100
IVP-100IMP-100
LTL-100 IR-100 ETL-100
IV-50IJ-100
G-50 G-25
G-10 G-0.25
GUNS & TIPS
CORE
BU
ILD
-UP
MAT
ERIA
LIM
PRES
SIO
NTE
MPO
RARY
BR
IDG
ES &
CRO
WN
SCI
MEN
TS &
CA
VITY
LIN
ERIM
PLAN
TOLO
GY
END
OD
ON
TIC
ACCE
SSO
RIES
EQU
IPM
ENT
REST
ORA
TIO
NA
CCES
SORI
ES
GUNS & TIPSGUNSFor dual cartridges 1:1 and compulsTIPSMixing tips & intra-oral tips
APPLICATORSELSOBRUSHDisposable dental applicators
LIGHTINGPROLUXMulti-purpose, intra-oral, lighting system
REFERENCES & PRESENTATIONS
EV-100 Green mixing tip (x 100)
ER-100 Pink mixing tip (x 100)
IT-100 Intra-oral tip for ER-100 and EV-100 (x 100)
EJ-100 Yellow mixing tip (x100)
IJ-100 Intra-oral tip for EJ-100 (x 100)
IV-50 Intra-oral tip metal for EJ-100 (x50)
EB-100 Blue mixing tip (x 100
EM-100 Brown mixing tip (x100)
EMP-100 Brown mixing tip flat (x100)
EVP-100 Purple mixing tip, long and flat)
IMP-100 Intra-oral tip for EMP (x 100)
IVP-100 Intra-oral mixing tip, for brown mixing tip EMP/EVP
EMO-50 Yellow mixing tips for automatic mixers (x 50)
IR-100 Intra-oral pink tip G18 (x100)
LTL Intra-oral black tip G20 (x100)
ETL Intra-oral blue tip G25 (x100)
MD : Class I
REFERENCES & PRESENTATIONSG-10 Gun for 10ml 1:1 syringes
G-25 Gun for 25ml 1:1 syringes
G-50 Gun for 50ml 1:1 syringes
G-0.25 Gun for 0,25ml compulsMD : Class I
COMPATIBILITYG-50 Dual cartridges 1:1 50ml
CORE D SC | CORE D LC | HARMONY | STILL BITEDUROC | DUROC CLEAR | PHOENIX | PHOENIX MD
G-25 Dual cartridges 1:1 25ml
CORE D | CORE D SC
G-10 Dual cartridges 1:1 10ml
CORE D | HARMONY | SEAL TEMP | SEAL TEMP SDUROC | PHOENIX
G-0.25 Compuls (unidoses) 0,25ml
PUREFILL 2 | CIRUS+
38 www.elsodent.com
ELSOBRUSH PROLUX
REFERENCES & PRESENTATIONS400EC 4 x 100 applicators (regular size)
400EF 4 x 100 applicators (fine size)
400EXF 4 x 100 applicators (Xfine size)
400ECD 4 x 100 applicators (regular) + dispenser
400EFD 4 x 100 applicators (fine) + dispenserMD : Class I
Disposable dental applicators
ADVANTAGESStiff head for a good and precise scrubbing of dental surfaces.
Stronger working end will bend anywhere to fit any teeth, even those which are hard to reach, with better control.
Pointed other end can be used to pierce unidose of bonding agent.
Wide diameter of the shift gives better grip, even with wet gloves.
3 different sizes fit any technique and adapt to any type of material used.
Different colours to identify different materials during clinical procedures.
Specially designed dispensing box will deliver applicators one by one, to avoid cross-contamination.
A strongly-built, stable and well-designed dispenser is available for frequent use of applicators
INDICATIONSTo apply cements, etchants, sealants, bonding agents, hemostatic solutions, cleansing solutions, conditioner,etc.
ADVANTAGESRelax patient’s muscles, keeping the mouth open.
Move the tongue back, away from the working area.
Provides a powerful and intense light on the working area.
Small and easy to put in place.
No wires.
Induction recharge
INDICATIONSMultiple restorations
Complicated tooth extractions
Endo work (removing of broken post, etc)
Orthodontic treatments
Implantology
TECHNICAL DATAAutonomy: 2h15
Charging time: 2h max.
Waterproof for cold sterilisation
Light intensity 5 x 8000 lux
LED lifetime: 50 000 heures
REFERENCES & PRESENTATIONSPRO PRO 1 induction charger + 1 light unit + 2 auto-
clavable silicone sockets (1 small, 1 big) + 100 disposable protection sleeves.
PRO-MSP2 Silicone sockets, small, x 2
PRO-MSG2 Silicone sockets, large, x 2
GJ-500 500 disposable sleeves 38x203mmMD : Class 1
Multi-purpose, intra-oral, lighting system
Distributeur
EQUIPMENT
CURING-LIGHTULTIMAMulti-wave, Multi-mode, Multi-purpose High performances LED curing-light
NEW
GENERATION
40 www.elsodent.com
Lucirine®, TPO (2,4,6-trimethylbenzoyldiphenylphosphineoxide) PPD (1-Phenylpropane-1,2-dione)
CQ (Camphorquinone)
BOOSTSTANDARDSOFT
MULTI-MODE MULTI-INDICATION
12,3mm
Wavelenght (nm)
Irra
dian
ce (m
W/c
m²/
nm)
Wavelenght (nm)
Irra
dian
ce (m
W/c
m²/
nm)
A unique lens combining UV /Blue /White mini-LEDs
ULTIMA is an innovative multi-wave based technology LED curing light. High performance and multi-purpose, ULTIMA is intuitive, easy-to-use and resistant
LIGHT-YEARS AHEAD...
INNOVATIVE MULTIWAVE TECHNOLOGYA unique lens featuring innovative multiwave LED technology, combining wavelengths with mini-LED UV - blue - white.
XL diameter lens, to fit requirements of dentists and orthodontists. Generates a collimated beam with an optimal diameter of 15mm, with a maximum intensity peak at a distance of 5mm, for precise and consistent polymerization.
WIDE SPECTRUM Powerful, for optimal polymerization of all materials on the market
Wide emission spectrum (385 - 490 nm), to activate all photo-initiators, including the latest generation such as Camphorquinone, Lucirine®, TPO, PPD
XL-DIAMETER LENS! Perfect for general practiceand orthodontics
4 POLYMERIZATION MODES
SOFT > 750 mW/cm²
10 s + beep 5 s
Polymerization close to the pulp (Composites, cavity liners) Low heat release
Polymerization depth ~ 1mm*
STANDARD> 1200m W/cm²
20 s + beep 5 s
Polymerization of composites and cements
Polymerization depth ~ 4mm*
BOOST> 2000 mW/cm²
3 s
Single ceramic veneers bonding
Single brackets bonding
BOOST SEQ> 2000 mW/cm²
10x (3 s ON + 2 s OFF)
Dedicated toorthodontists
2 DIAGNOSIS MODES
DIAGNOSIS | UV LED
120s
Visualization of dental plaque, infected dentin, micro-leakages, old composites restorations and excess resin cements when they contain fluorescent molecules
TRANSILLUMINATION | WHITE LED 120s
Visualization of cracks depth, fissures and subgingival calculus
* Test according to ISO 4049
NOUVEAU
NEW
41www.elsodent.com
IMPR
ESSI
ON
IMPL
ANTO
LOG
YEN
DO
DO
NTI
CAC
CESS
ORI
ESCO
RE B
UIL
D-U
P M
ATER
IAL
TEM
PORA
RY
BRID
GES
& C
ROW
NS
CIM
ENTS
&
CAVI
TY L
INER
EQU
IPM
ENT
REST
ORA
TIO
NAC
CESS
ORI
ES
Universal charger | Extra batteryref. C-BAT ref. BAT-3.7L
Eye protectionref. ULTI-PO
Charging stationref. ULTI-BASE
Concentrator 2mmref. ULTI-CO
TECHNICAL DATAWavelenght 385 - 490 nm
Dimensions Weight : 95 g Length : 210mmDiam max : 20 mm
Battery Type 14650 IMR | 3,7 V
Power Input 100 V…240 V / ~ 50 Hz…60 Hz Output 5V 2.0A
Programmes Multi-purpose 6 modes : Polymerization Standard | Soft | Boost | Sequential Boost Diagnosis | Transillumination
Water resistant IPX4
Warranty 4-years
REFERENCESULTI-G 1 handpiece + 1 station/charger + 1 rechargeable
battery + 100 disposable protection sleeves + 2 eyes protection tips. Aluminium color
ULTI-N 1 handpiece + 1 station/charger + 1 rechargeable battery + 100 disposable protection sleeves + 2 eyes protection. Black matt color
ULTI-CO 2mm concentrator tip
GJ-500 Disposable protection sleeves x500
ULTI-PO Eyes protection silicon x2
BAT-3.7L Extra standard rechageable battery
C-BAT Universal battery charger
Medical Device : class I
Shock-resistant
Classic curing-light
Easy intra-oral access.
LIGHT-YEARS AHEAD...
ROBUSTNESS & RELIABILITYDesigned in a single-piece of anodised aerospace aluminium for great robustness and amazing drop resistance
Water resistant (IPX4)
4-years warranty
WIRELESS CHARGING & CONTINUOUS USE ULTIMA recharges simply placed on its docking station.
Possibility of continuous use with an additional battery + universal charger (see accessories)
The battery exchange is very easy, fast and equipment-free!
DESIGN & ERGONOMICSHandy and very light with a ideal weight of 95 g and a length of 21cm.
The pen-like grip with 3 fingers gives more dexterity.
Slim and compact shape. ULTIMA facilitates intra-oral access
in posterior and anterior without overstretching the mouth
for optimal patient and practitioner comfort.
INTUITIVE & EASY-TO-USE2-button only : ‘‘ON/OFF’’ and ‘‘Mode’’
Indicators of current mode and battery charge status.
Available in 2 finitions : aluminium or matt black.
ULTIMA
NEW
GENERATION
Cover images designed by Freepik
NOTES
LABORATOIRE ELSODENT 35 av du Gros Chêne | BP50072 HERBLAY | 95612 CERGY-PONTOISE CEDEX Tél : +33 1 30 37 75 75 | Fax : +33 1 34 40 07 04 | Email : elsodent@elsodent.comwww.elsodent.com
INFO & CONTACT
+33 (0) 1 30 37 75 75 elsodent@elsodent.com
www.elsodent.com
25TWENTY-FIVE
YEARS
OF MANUFACTURINGPREDICTABLE & RELIABLEDENTAL SOLUTIONS FORC L I N I C A L S U C C E S S
CTGEN-03 EN JAN-20
Recommended