Black and Decker PS1800 Case Replacement - the-eye.eu Guides/Black and Decker... · Black and...

Black and Decker PS1800 Case ReplacementThis guide will illustrate how to open the outer case of the Black and Decker PS1800.

Written By: Christian Aldrich

Black and Decker PS1800 Case Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 4

INTRODUCTION

This guide will illustrate how to open the outer case of the Black and Decker PS1800.

TOOLS:Phillips #00 Screwdriver (1)

Black and Decker PS1800 Case Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 4

Step 1 — Case

Flip device over so that the screw holes face up.

Use the Phillips #00 screwdriver to remove all six 18mm Phillips screws.

Use the Phillips #00 screwdriver to remove the single 12mm Philips screw.

Step 2

Remove one side of the Clamshell.

Black and Decker PS1800 Case Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 4

This document was last generated on 2017-11-20 06:50:12 PM.

Black and Decker PS1800 Case Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 4